Oc4j standalone 10.1.3.3 and service registry with ssl install help needed
Hello,
I'm trying to install service registry with oc4j standalone for testing and demoing but am having some difficulty with the ssl side of things.
I have setup a oc4j standalone 10.1.3.3 and configured the following ports:
default http port: 9991
ormi port: 9992
ormi ssl port: 9993
https port: 9994
I have configured oc4j standalone for SSl as per instructions by copying default-web-site.xml to secure-web-site.xml and added secure="true" to <web-site> tag and added <ssl-config keystore..../> as well. I've also modified server .xml and added <web-site path="./secure-web-site.xml" /> into the file.
I have then installed service registry as a publication (discovery) with http port pointing to 9991 and ssl enabled pointing to 9994 with oracle database.
I can load http://localhost:9991/ and also https://localhost:9994 and both secure and non-secure page loads fine for the oc4j webpage. I can load http://localhost:9991/registry/uddi/web/ page but when I click on any of the link on it tries to load https://localhost:9994/registry/uddi/web i get a http 404 not found error.
Tried googling and searching the forum for info, but I'm in need of a little help on where I went wrong.
Thanks
Hy frank, thanks for your reply:
We use a jdk shipped with jdeveloper for running OC4J;
"<JDev install dir>\jdk\bin\java.exe"
java -version says:
java version "1.5.0_06"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.5.0_06-b05)
Java HotSpot(TM) Client VM (build 1.5.0_06-b05, mixed mode)
Regards.
Davide
Similar Messages
-
Weblogic app server wsdl web service call with SSL Validation error = 16
Weblogic app server wsdl web service call with SSL Validation error = 16
I need to make wsdl web service call in my weblogic app server. The web service is provided by a 3rd party vendor. I keep getting error
Cannot complete the certificate chain: No trusted cert found
Certificate chain received from ws-eq.demo.xxx.com - xx.xxx.xxx.156 was not trusted causing SSL handshake failure
Validation error = 16
From the SSL debug log, I can see 3 verisign hierarchy certs are correctly loaded (see 3 lines in the log message starting with “adding as trusted cert”). But somehow after first handshake, I got error “Cannot complete the certificate chain: No trusted cert found”.
Here is how I load trustStore and keyStore in my java program:
System.setProperty("javax.net.ssl.trustStore",”cacerts”);
System.setProperty("javax.net.ssl.trustStorePassword", trustKeyPasswd);
System.setProperty("javax.net.ssl.trustStoreType","JKS");
System.setProperty("javax.net.ssl.keyStoreType","JKS");
System.setProperty("javax.net.ssl.keyStore", keyStoreName);
System.setProperty("javax.net.ssl.keyStorePassword",clientCertPwd); System.setProperty("com.sun.xml.ws.transport.http.client.HttpTransportPipe.dump","true");
Here is how I create cacerts using verisign hierarchy certs (in this order)
1.6.0_29/jre/bin/keytool -import -trustcacerts -keystore cacerts -storepass changeit -file VerisignClass3G5PCA3Root.txt -alias "Verisign Class3 G5P CA3 Root"
1.6.0_29/jre/bin/keytool -import -trustcacerts -keystore cacerts -storepass changeit -file VerisignC3G5IntermediatePrimary.txt -alias "Verisign C3 G5 Intermediate Primary"
1.6.0_29/jre/bin/keytool -import -trustcacerts -keystore cacerts -storepass changeit -file VerisignC3G5IntermediateSecondary.txt -alias "Verisign C3 G5 Intermediate Secondary"
Because my program is a weblogic app server, when I start the program, I have java command line options set as:
-Dweblogic.security.SSL.trustedCAKeyStore=SSLTrust.jks
-Dweblogic.security.SSL.ignoreHostnameVerification=true
-Dweblogic.security.SSL.enforceConstraints=strong
That SSLTrust.jks is the trust certificate from our web server which sits on a different box. In our config.xml file, we also refer to the SSLTrust.jks file when we bring up the weblogic app server.
In addition, we have working logic to use some other wsdl web services from the same vendor on the same SOAP server. In the working web service call flows, we use clientgen to create client stub, and use SSLContext and WLSSLAdapter to load trustStore and keyStore, and then bind the SSLContext and WLSSLAdapter objects to the webSerive client object and make the webservie call. For the new wsdl file, I am told to use wsimport to create client stub. In the client code created, I don’t see any way that I can bind SSLContext and WLSSLAdapter objects to the client object, so I have to load certs by settting system pramaters. Here I attached the the wsdl file.
I have read many articles. It seems as long as I can install the verisign certs correctly to web logic server, I should have fixed the problem. Now the questions are:
1. Do I create “cacerts” the correct order with right keeltool options?
2. Since command line option “-Dweblogic.security.SSL.trustedCAKeyStore” is used for web server jks certificate, will that cause any problem for me?
3. Is it possible to use wsimport to generate client stub that I can bind SSLContext and WLSSLAdapter objects to it?
4. Do I need to put the “cacerts” to some specific weblogic directory?
---------------------------------wsdl file
<wsdl:definitions name="TokenServices" targetNamespace="http://tempuri.org/" xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/" xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/" xmlns:wsu="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:soap12="http://schemas.xmlsoap.org/wsdl/soap12/" xmlns:tns="http://tempuri.org/" xmlns:wsa="http://schemas.xmlsoap.org/ws/2004/08/addressing" xmlns:wsp="http://schemas.xmlsoap.org/ws/2004/09/policy" xmlns:wsap="http://schemas.xmlsoap.org/ws/2004/08/addressing/policy" xmlns:wsaw="http://www.w3.org/2006/05/addressing/wsdl" xmlns:msc="http://schemas.microsoft.com/ws/2005/12/wsdl/contract" xmlns:wsa10="http://www.w3.org/2005/08/addressing" xmlns:wsx="http://schemas.xmlsoap.org/ws/2004/09/mex" xmlns:wsam="http://www.w3.org/2007/05/addressing/metadata">
<wsp:Policy wsu:Id="TokenServices_policy">
<wsp:ExactlyOne>
<wsp:All>
<sp:TransportBinding xmlns:sp="http://schemas.xmlsoap.org/ws/2005/07/securitypolicy">
<wsp:Policy>
<sp:TransportToken>
<wsp:Policy>
<sp:HttpsToken RequireClientCertificate="true"/>
</wsp:Policy>
</sp:TransportToken>
<sp:AlgorithmSuite>
<wsp:Policy>
<sp:Basic256/>
</wsp:Policy>
</sp:AlgorithmSuite>
<sp:Layout>
<wsp:Policy>
<sp:Strict/>
</wsp:Policy>
</sp:Layout>
</wsp:Policy>
</sp:TransportBinding>
<wsaw:UsingAddressing/>
</wsp:All>
</wsp:ExactlyOne>
</wsp:Policy>
<wsdl:types>
<xsd:schema targetNamespace="http://tempuri.org/Imports">
<xsd:import schemaLocation="xsd0.xsd" namespace="http://tempuri.org/"/>
<xsd:import schemaLocation="xsd1.xsd" namespace="http://schemas.microsoft.com/2003/10/Serialization/"/>
</xsd:schema>
</wsdl:types>
<wsdl:message name="ITokenServices_GetUserToken_InputMessage">
<wsdl:part name="parameters" element="tns:GetUserToken"/>
</wsdl:message>
<wsdl:message name="ITokenServices_GetUserToken_OutputMessage">
<wsdl:part name="parameters" element="tns:GetUserTokenResponse"/>
</wsdl:message>
<wsdl:message name="ITokenServices_GetSSOUserToken_InputMessage">
<wsdl:part name="parameters" element="tns:GetSSOUserToken"/>
</wsdl:message>
<wsdl:message name="ITokenServices_GetSSOUserToken_OutputMessage">
<wsdl:part name="parameters" element="tns:GetSSOUserTokenResponse"/>
</wsdl:message>
<wsdl:portType name="ITokenServices">
<wsdl:operation name="GetUserToken">
<wsdl:input wsaw:Action="http://tempuri.org/ITokenServices/GetUserToken" message="tns:ITokenServices_GetUserToken_InputMessage"/>
<wsdl:output wsaw:Action="http://tempuri.org/ITokenServices/GetUserTokenResponse" message="tns:ITokenServices_GetUserToken_OutputMessage"/>
</wsdl:operation>
<wsdl:operation name="GetSSOUserToken">
<wsdl:input wsaw:Action="http://tempuri.org/ITokenServices/GetSSOUserToken" message="tns:ITokenServices_GetSSOUserToken_InputMessage"/>
<wsdl:output wsaw:Action="http://tempuri.org/ITokenServices/GetSSOUserTokenResponse" message="tns:ITokenServices_GetSSOUserToken_OutputMessage"/>
</wsdl:operation>
</wsdl:portType>
<wsdl:binding name="TokenServices" type="tns:ITokenServices">
<wsp:PolicyReference URI="#TokenServices_policy"/>
<soap12:binding transport="http://schemas.xmlsoap.org/soap/http"/>
<wsdl:operation name="GetUserToken">
<soap12:operation soapAction="http://tempuri.org/ITokenServices/GetUserToken" style="document"/>
<wsdl:input>
<soap12:body use="literal"/>
</wsdl:input>
<wsdl:output>
<soap12:body use="literal"/>
</wsdl:output>
</wsdl:operation>
<wsdl:operation name="GetSSOUserToken">
<soap12:operation soapAction="http://tempuri.org/ITokenServices/GetSSOUserToken" style="document"/>
<wsdl:input>
<soap12:body use="literal"/>
</wsdl:input>
<wsdl:output>
<soap12:body use="literal"/>
</wsdl:output>
</wsdl:operation>
</wsdl:binding>
<wsdl:service name="TokenServices">
<wsdl:port name="TokenServices" binding="tns:TokenServices">
<soap12:address location="https://ws-eq.demo.i-deal.com/PhxEquity/TokenServices.svc"/>
<wsa10:EndpointReference>
<wsa10:Address>https://ws-eq.demo.xxx.com/PhxEquity/TokenServices.svc</wsa10:Address>
</wsa10:EndpointReference>
</wsdl:port>
</wsdl:service>
</wsdl:definitions>
----------------------------------application log
adding as trusted cert:
Subject: CN=VeriSign Class 3 International Server CA - G3, OU=Terms of use at https://www.verisign.com/rpa (c)10, OU=VeriSign Trust Network, O="VeriSign, Inc.", C=US
Issuer: CN=VeriSign Class 3 Public Primary Certification Authority - G5, OU="(c) 2006 VeriSign, Inc. - For authorized use only", OU=VeriSign Trust Network, O="VeriSign, Inc.", C=US
Algorithm: RSA; Serial number: 0x641be820ce020813f32d4d2d95d67e67
Valid from Sun Feb 07 19:00:00 EST 2010 until Fri Feb 07 18:59:59 EST 2020
adding as trusted cert:
Subject: OU=Class 3 Public Primary Certification Authority, O="VeriSign, Inc.", C=US
Issuer: OU=Class 3 Public Primary Certification Authority, O="VeriSign, Inc.", C=US
Algorithm: RSA; Serial number: 0x3c9131cb1ff6d01b0e9ab8d044bf12be
Valid from Sun Jan 28 19:00:00 EST 1996 until Wed Aug 02 19:59:59 EDT 2028
adding as trusted cert:
Subject: CN=VeriSign Class 3 Public Primary Certification Authority - G5, OU="(c) 2006 VeriSign, Inc. - For authorized use only", OU=VeriSign Trust Network, O="VeriSign, Inc.", C=US
Issuer: OU=Class 3 Public Primary Certification Authority, O="VeriSign, Inc.", C=US
Algorithm: RSA; Serial number: 0x250ce8e030612e9f2b89f7054d7cf8fd
Valid from Tue Nov 07 19:00:00 EST 2006 until Sun Nov 07 18:59:59 EST 2021
<Mar 7, 2013 6:59:21 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Ignoring not supported JCE Cipher: SunPKCS11-Solaris version 1.6 for algorithm DESede/CBC/NoPadding>
<Mar 7, 2013 6:59:21 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Will use default Cipher for algorithm DESede>
<Mar 7, 2013 6:59:21 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Using JCE Cipher: SunJCE version 1.6 for algorithm RSA/ECB/NoPadding>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <SSLSetup: loading trusted CA certificates>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Filtering JSSE SSLSocket>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <SSLIOContextTable.addContext(ctx): 28395435>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <SSLSocket will be Muxing>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <write HANDSHAKE, offset = 0, length = 115>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <isMuxerActivated: false>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <25779276 SSL3/TLS MAC>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <25779276 received HANDSHAKE>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <HANDSHAKEMESSAGE: ServerHello>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <HANDSHAKEMESSAGE: Certificate>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Cannot complete the certificate chain: No trusted cert found>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Validating certificate 0 in the chain: Serial number: 2400410601231772600606506698552332774
Issuer:C=US, O=VeriSign, Inc., OU=VeriSign Trust Network, OU=Terms of use at https://www.verisign.com/rpa (c)10, CN=VeriSign Class 3 International Server CA - G3
Subject:C=US, ST=New York, L=New York, O=xxx LLC, OU=GTIG, CN=ws-eq.demo.xxx.com
Not Valid Before:Tue Dec 18 19:00:00 EST 2012
Not Valid After:Wed Jan 07 18:59:59 EST 2015
Signature Algorithm:SHA1withRSA
>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Validating certificate 1 in the chain: Serial number: 133067699711757643302127248541276864103
Issuer:C=US, O=VeriSign, Inc., OU=VeriSign Trust Network, OU=(c) 2006 VeriSign, Inc. - For authorized use only, CN=VeriSign Class 3 Public Primary Certification Authority - G5
Subject:C=US, O=VeriSign, Inc., OU=VeriSign Trust Network, OU=Terms of use at https://www.verisign.com/rpa (c)10, CN=VeriSign Class 3 International Server CA - G3
Not Valid Before:Sun Feb 07 19:00:00 EST 2010
Not Valid After:Fri Feb 07 18:59:59 EST 2020
Signature Algorithm:SHA1withRSA
>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <validationCallback: validateErr = 16>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> < cert[0] = Serial number: 2400410601231772600606506698552332774
Issuer:C=US, O=VeriSign, Inc., OU=VeriSign Trust Network, OU=Terms of use at https://www.verisign.com/rpa (c)10, CN=VeriSign Class 3 International Server CA - G3
Subject:C=US, ST=New York, L=New York, O=xxx LLC, OU=GTIG, CN=ws-eq.demo.xxx.com
Not Valid Before:Tue Dec 18 19:00:00 EST 2012
Not Valid After:Wed Jan 07 18:59:59 EST 2015
Signature Algorithm:SHA1withRSA
>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> < cert[1] = Serial number: 133067699711757643302127248541276864103
Issuer:C=US, O=VeriSign, Inc., OU=VeriSign Trust Network, OU=(c) 2006 VeriSign, Inc. - For authorized use only, CN=VeriSign Class 3 Public Primary Certification Authority - G5
Subject:C=US, O=VeriSign, Inc., OU=VeriSign Trust Network, OU=Terms of use at https://www.verisign.com/rpa (c)10, CN=VeriSign Class 3 International Server CA - G3
Not Valid Before:Sun Feb 07 19:00:00 EST 2010
Not Valid After:Fri Feb 07 18:59:59 EST 2020
Signature Algorithm:SHA1withRSA
>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <weblogic user specified trustmanager validation status 16>
<Mar 7, 2013 6:59:22 PM EST> <Warning> <Security> <BEA-090477> <Certificate chain received from ws-eq.demo.xxx.com - xx.xxx.xxx.156 was not trusted causing SSL handshake failure.>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Validation error = 16>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Certificate chain is untrusted>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <SSLTrustValidator returns: 16>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Trust status (16): CERT_CHAIN_UNTRUSTED>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <NEW ALERT with Severity: FATAL, Type: 42
java.lang.Exception: New alert stack
at com.certicom.tls.record.alert.Alert.<init>(Unknown Source)
at com.certicom.tls.record.handshake.HandshakeHandler.fireAlert(Unknown Source)
at com.certicom.tls.record.handshake.ClientStateReceivedServerHello.handle(Unknown Source)
at com.certicom.tls.record.handshake.HandshakeHandler.handleHandshakeMessage(Unknown Source)
at com.certicom.tls.record.handshake.HandshakeHandler.handleHandshakeMessages(Unknown Source)
at com.certicom.tls.record.MessageInterpreter.interpretContent(Unknown Source)
at com.certicom.tls.record.MessageInterpreter.decryptMessage(Unknown Source)
at com.certicom.tls.record.ReadHandler.processRecord(Unknown Source)
at com.certicom.tls.record.ReadHandler.readRecord(Unknown Source)
at com.certicom.tls.record.ReadHandler.readUntilHandshakeComplete(Unknown Source)
at com.certicom.tls.interfaceimpl.TLSConnectionImpl.completeHandshake(Unknown Source)
at com.certicom.tls.record.WriteHandler.write(Unknown Source)
at com.certicom.io.OutputSSLIOStreamWrapper.write(Unknown Source)
at java.io.BufferedOutputStream.flushBuffer(BufferedOutputStream.java:65)
at java.io.BufferedOutputStream.flush(BufferedOutputStream.java:123)
at java.io.FilterOutputStream.flush(FilterOutputStream.java:123)
at weblogic.net.http.HttpURLConnection.writeRequests(HttpURLConnection.java:154)
at weblogic.net.http.HttpURLConnection.getInputStream(HttpURLConnection.java:358)
at weblogic.net.http.SOAPHttpsURLConnection.getInputStream(SOAPHttpsURLConnection.java:37)
at weblogic.wsee.util.is.InputSourceUtil.loadURL(InputSourceUtil.java:100)
at weblogic.wsee.util.dom.DOMParser.getWebLogicDocumentImpl(DOMParser.java:118)
at weblogic.wsee.util.dom.DOMParser.getDocument(DOMParser.java:65)
at weblogic.wsee.wsdl.WsdlReader.getDocument(WsdlReader.java:311)
at weblogic.wsee.wsdl.WsdlReader.getDocument(WsdlReader.java:305)
at weblogic.wsee.jaxws.spi.WLSProvider.readWSDL(WLSProvider.java:296)
at weblogic.wsee.jaxws.spi.WLSProvider.createServiceDelegate(WLSProvider.java:77)
at weblogic.wsee.jaxws.spi.WLSProvider.createServiceDelegate(WLSProvider.java:62)
at javax.xml.ws.Service.<init>(Service.java:56)
at ideal.ws2j.eqtoken.TokenServices.<init>(TokenServices.java:64)
at com.citi.ilrouter.util.IpreoEQSSOClient.invokeRpcPortalToken(IpreoEQSSOClient.java:165)
at com.citi.ilrouter.servlets.T3LinkServlet.doPost(T3LinkServlet.java:168)
at com.citi.ilrouter.servlets.T3LinkServlet.doGet(T3LinkServlet.java:206)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:707)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:175)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(Unknown Source)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(Unknown Source)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(Unknown Source)
at weblogic.servlet.internal.WebAppServletContext.execute(Unknown Source)
at weblogic.servlet.internal.ServletRequestImpl.run(Unknown Source)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <write ALERT, offset = 0, length = 2>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <close(): 6457753>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <close(): 6457753>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <SSLIOContextTable.removeContext(ctx): 22803607>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Filtering JSSE SSLSocket>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <SSLIOContextTable.addContext(ctx): 14640403>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <SSLSocket will be Muxing>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <write HANDSHAKE, offset = 0, length = 115>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <isMuxerActivated: false>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <23376797 SSL3/TLS MAC>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <23376797 received HANDSHAKE>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <HANDSHAKEMESSAGE: ServerHello>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <HANDSHAKEMESSAGE: Certificate>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Cannot complete the certificate chain: No trusted cert found>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Validating certificate 0 in the chain: Serial number: 2400410601231772600606506698552332774
Issuer:C=US, O=VeriSign, Inc., OU=VeriSign Trust Network, OU=Terms of use at https://www.verisign.com/rpa (c)10, CN=VeriSign Class 3 International Server CA - G3
Subject:C=US, ST=New York, L=New York, O=xxx LLC, OU=GTIG, CN=ws-eq.demo.xxx.com
Not Valid Before:Tue Dec 18 19:00:00 EST 2012
Not Valid After:Wed Jan 07 18:59:59 EST 2015
Signature Algorithm:SHA1withRSA
>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Validating certificate 1 in the chain: Serial number: 133067699711757643302127248541276864103
Issuer:C=US, O=VeriSign, Inc., OU=VeriSign Trust Network, OU=(c) 2006 VeriSign, Inc. - For authorized use only, CN=VeriSign Class 3 Public Primary Certification Authority - G5
Subject:C=US, O=VeriSign, Inc., OU=VeriSign Trust Network, OU=Terms of use at https://www.verisign.com/rpa (c)10, CN=VeriSign Class 3 International Server CA - G3
Not Valid Before:Sun Feb 07 19:00:00 EST 2010
Not Valid After:Fri Feb 07 18:59:59 EST 2020
Signature Algorithm:SHA1withRSA
>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <validationCallback: validateErr = 16>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> < cert[0] = Serial number: 2400410601231772600606506698552332774
Issuer:C=US, O=VeriSign, Inc., OU=VeriSign Trust Network, OU=Terms of use at https://www.verisign.com/rpa (c)10, CN=VeriSign Class 3 International Server CA - G3
Subject:C=US, ST=New York, L=New York, O=xxx LLC, OU=GTIG, CN=ws-eq.demo.xxx.com
Not Valid Before:Tue Dec 18 19:00:00 EST 2012
Not Valid After:Wed Jan 07 18:59:59 EST 2015
Signature Algorithm:SHA1withRSA
>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> < cert[1] = Serial number: 133067699711757643302127248541276864103
Issuer:C=US, O=VeriSign, Inc., OU=VeriSign Trust Network, OU=(c) 2006 VeriSign, Inc. - For authorized use only, CN=VeriSign Class 3 Public Primary Certification Authority - G5
Subject:C=US, O=VeriSign, Inc., OU=VeriSign Trust Network, OU=Terms of use at https://www.verisign.com/rpa (c)10, CN=VeriSign Class 3 International Server CA - G3
Not Valid Before:Sun Feb 07 19:00:00 EST 2010
Not Valid After:Fri Feb 07 18:59:59 EST 2020
Signature Algorithm:SHA1withRSA
>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <weblogic user specified trustmanager validation status 16>
<Mar 7, 2013 6:59:22 PM EST> <Warning> <Security> <BEA-090477> <Certificate chain received from ws-eq.demo.xxx.com - 12.29.210.156 was not trusted causing SSL handshake failure.>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Validation error = 16>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Certificate chain is untrusted>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <SSLTrustValidator returns: 16>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Trust status (16): CERT_CHAIN_UNTRUSTED>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <NEW ALERT with Severity: FATAL, Type: 42
java.lang.Exception: New alert stack
at com.certicom.tls.record.alert.Alert.<init>(Unknown Source)
at com.certicom.tls.record.handshake.HandshakeHandler.fireAlert(Unknown Source)
at com.certicom.tls.record.handshake.ClientStateReceivedServerHello.handle(Unknown Source)
at com.certicom.tls.record.handshake.HandshakeHandler.handleHandshakeMessage(Unknown Source)
at com.certicom.tls.record.handshake.HandshakeHandler.handleHandshakeMessages(Unknown Source)
at com.certicom.tls.record.MessageInterpreter.interpretContent(Unknown Source)
at com.certicom.tls.record.MessageInterpreter.decryptMessage(Unknown Source)
at com.certicom.tls.record.ReadHandler.processRecord(Unknown Source)
at com.certicom.tls.record.ReadHandler.readRecord(Unknown Source)
at com.certicom.tls.record.ReadHandler.readUntilHandshakeComplete(Unknown Source)
at com.certicom.tls.interfaceimpl.TLSConnectionImpl.completeHandshake(Unknown Source)
at com.certicom.tls.record.WriteHandler.write(Unknown Source)
at com.certicom.io.OutputSSLIOStreamWrapper.write(Unknown Source)
at java.io.BufferedOutputStream.flushBuffer(BufferedOutputStream.java:65)
at java.io.BufferedOutputStream.flush(BufferedOutputStream.java:123)
at java.io.FilterOutputStream.flush(FilterOutputStream.java:123)
at weblogic.net.http.HttpURLConnection.writeRequests(HttpURLConnection.java:154)
at weblogic.net.http.HttpURLConnection.getInputStream(HttpURLConnection.java:358)
at weblogic.net.http.SOAPHttpsURLConnection.getInputStream(SOAPHttpsURLConnection.java:37)
at weblogic.wsee.util.is.InputSourceUtil.loadURL(InputSourceUtil.java:100)
at weblogic.wsee.util.dom.DOMParser.getWebLogicDocumentImpl(DOMParser.java:118)
at weblogic.wsee.util.dom.DOMParser.getDocument(DOMParser.java:65)
at weblogic.wsee.wsdl.WsdlReader.getDocument(WsdlReader.java:311)
at weblogic.wsee.wsdl.WsdlReader.getDocument(WsdlReader.java:305)
at weblogic.wsee.jaxws.spi.WLSProvider.readWSDL(WLSProvider.java:296)
at weblogic.wsee.jaxws.spi.WLSProvider.createServiceDelegate(WLSProvider.java:77)
at weblogic.wsee.jaxws.spi.WLSProvider.createServiceDelegate(WLSProvider.java:62)
at javax.xml.ws.Service.<init>(Service.java:56)
at ideal.ws2j.eqtoken.TokenServices.<init>(TokenServices.java:64)
at com.citi.ilrouter.util.IpreoEQSSOClient.invokeRpcPortalToken(IpreoEQSSOClient.java:165)
at com.citi.ilrouter.servlets.T3LinkServlet.doPost(T3LinkServlet.java:168)
at com.citi.ilrouter.servlets.T3LinkServlet.doGet(T3LinkServlet.java:206)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:707)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:175)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(Unknown Source)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(Unknown Source)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(Unknown Source)
at weblogic.servlet.internal.WebAppServletContext.execute(Unknown Source)
at weblogic.servlet.internal.ServletRequestImpl.run(Unknown Source)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <write ALERT, offset = 0, length = 2>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <close(): 16189141>I received a workaround by an internal message.
The how to guide is :
-Download the wsdl file (with bindings, not the one from ESR)
-Correct it in order that the schema corresponds to the answer (remove minOccurs or other things like this)
-Deploy the wsdl file on you a server (java web project for exemple). you can deploy on your local
-Create a new logicial destination that point to the wsdl file modified
-Change the metadata destination in your web dynpro project for the corresponding model and keep the execution desitnation as before.
Then the received data is check by the metadata logical destination but the data is retrieved from the correct server. -
how do I verify my apple id? I can't sign in to it in mail and I can't make a new one because it just will not process I'm trying to set up iCloud between iPad and iPhone and having ALOT of difficulty pleAse help need it done by later on today!!!!!
In order to use your Apple ID to create an iCloud account, the primary email address associated with the ID must first be verified. To do this, Apple will send a verification email to your account and you must respond to the email by clicking the Verify Now link. Make sure you are check the spam/junk folder as well as the inbox. If it isn't there, go to https://appleid.apple.com, click Manage your Apple ID, sign in, click on Name, ID and Email addresses on the left, then to the right click Resend under your Primary Email Address to resend the verification email.
-
Regd.UDDI server configuration in PI 7.1 and services registry
Hi ,
i have gone through many forum posts before posting this , so expecting a genuine answer:) which can be rewarded:).
I am using PI 7.1 and trying to taste the services registry flavour of it.
i followed the SAP Note 1267817 - Configure Services Registry proxy , but i am not able to assign the roles
SERVICES_REGISTRY_READ_ONLY or SERVICES_REGISTRY_READ_WRITE in Su01.
i get a message that such a role doesnt exist at all.
Qn1:Do i need installed any software componet like UDDI etc, or do in need to have uddi server
configured for this , if yes how to do that..
I have seen the help.sap link : I am struck at the point "Discovery URL host name", according to the help.sap it will come automatically , but in my case it has some Rivalry.
Qn2:How to configure UDDI server n PI 7.1
, any step by step guide which applies to PI 7.1 will help.
Qn3:What is the relation between tcode soamanager, services registry and UDDI
Qn4: I am not able to search my services in soamanager->business administration->WS administration
I have activated the services (Webservice Runtime)as mentioned in the Blog
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/d06b6392-cde7-2c10-8f8b-bdea5d781dd9Thanks Raj,
This property specifies a URL for the host name of the *physical machine where the Discovery
API of the UDDI server is located.* Its value is set automatically by default.
I am not able to understand this present in [help.sap |http://help.sap.com/saphelp_nwpi71/helpdata/en/45/c1ea61a1194432e10000000a155369/frameset.htm]
what may be the reason for not able to assign the above roles as per the sap note given above?
Is there any componet needs to be installed line UDDI?Can a technical user role have this roles
accepted,i used my ID for configuration XI super user!
After following the note partially i.e w/o giving the user roles. when in rt click sender agreement and say publish
it slaps me with this error
Com.sap.aii.ib.core.uddi.RegistryCleintException:
A save request exceeded the quantity limits u2026Number of Business Entries Exceeds Your limit of 1(2)
But if i open Services registry i can see that service got published.when i test in WS navigatore it
gives 503 service unavailable error.
How to delete unused published services
. Initialy i took the wsdl URL generated from
disply WSDL and published using publish tab in Services Registry , they dont have any key associated.
How to delete them?I can see any direct option
Regards,
Abhi -
Knowledge on ES workspace and Service Registry
Hi All,
I am a webdynpro for java developer.
Recently I installed CE 7 1 EHP1. where I got ESR as well.
Kindly, provide me some information on ESR, and what is Service repository, how I can use them in NWDS CE 7 1 EHP1.
Regards,
Devender VHi,
When using services, we distinguish between the service provider and the service consumer.In the simplest case, we can assume that the service provideru2014the person who provides the servicesu2014knows the service requestor and informs the latter where services can be found. However, this contradicts the idea of a global service platform. What makes the use of Web Services attractive is the idea that applications can be built from services that are available in a central registry. This service can be provided with the Services Registry.
The Services Registry is a registry for Web services. Located centrally within an SOA landscape, it contains entries for all services and service definitions in that landscape, with references to the servicesu2019 relevant WSDL metadata and to the locations of the callable service endpoints. The registered services are classified using semantic-rich classification systems to enable browsing of services by classification.
The ES Workplace in the SAP Developer Network (SDN) provides a central source of information for getting to know Enterprise Services. It has a publicly available Services Registry.
Browse the enterprise services that are offered in the ES Workplace of the SAP Developer Network (at sdn.sap.com --> Enterprise SOA --> Explore Enterprise Services). By reading the detailed documentation of the enterprise services you can decide which services are useful in your applications.
You can use business objects from a SAP backend system, or from Visual Composer, for your Java Web Dynpro application. From the Enterprise Services Repository (ESR) in an SAP system, you retrieve the business object nodes and compound service interfaces. You import the Enterprise Services Model. (similar to the way you use Adaptive RFC or webservices models).
The detailed explaination is available in CE Library on help.sap.com.
Here are links on services registry & ESR ...related to CE 7.1.1 (ehp1):
http://help.sap.com/saphelp_nwce711/helpdata/EN/8d/aebdfd45264936877b3d531743df78/frameset.htm
http://help.sap.com/saphelp_nwce711/helpdata/EN/47/d2ab0eb6f33c84e10000000a42189c/frameset.htm
Hope this clarifies.
Regards,
Anagha
Edited by: Anagha Jawalekar on Mar 27, 2009 4:07 PM -
Request management service issue with SSL Sites
Hi guys,
I've configured up the request management service, but after start the service on our wfe servers (even before to configure specific web applications), our ssl sites begin to fail and the event viewer start to alert several errors, by the other hand,
sites over 80 port with no SSL works as expected.
I've found some similiar scenarios without a happy ending. Below you can find some of the main errors in event viewer and ULS Logs. In
this post solved a very similar issue using ssl host headers with a unique ip but we are using fqdn certificates so it is not an option for us.
I've already checked the
good posts from Spencer Harbar and He says that is good idea to use host named site collection, but this is not an option for me because we need to use Self Service Creation and mixed authetnication, besides, None of the Technet literature that i've reviewed
says something about don't support path based site collection.
So far, the only way to avoid this errors is not using the service(discouraging finding), These are some errors we got on Event viewer and logs:
Machine 'MACHINENAME (AppPool(_LM_W3SVC_515444293_ROOT))' failed ping validation and has been unavailable since '3/28/2014 3:55:48 PM'. (Just starting the service Event viewer begis to have a bunch of this errors)
03/28/2014 13:34:01.96 w3wp.exe (0x1184)
0x154C SharePoint Foundation
Request Management ai2q3
High Reached maximum number of failed machines based on ping results for this routing group
53c2819c-8216-20f3-68c0-c0a3e55c92d5
03/28/2014 13:34:01.96 w3wp.exe (0x1184)
0x154C SharePoint Foundation
Request Management ai2q4
Medium Unavailable machines based on ping results: MACHINENAME
53c2819c-8216-20f3-68c0-c0a3e55c92d5
03/28/2014 13:34:01.97 w3wp.exe (0x1184)
0x1C2C SharePoint Foundation
Request Management adc7u
Medium Mapping URI from 'https://HOSTNAME:443/Style Library/somos-sura-css/inicio/inicio.css' to 'https://MACHINENAME/Style%20Library/somos-sura-css/inicio/inicio.css'
53c2819c-8217-20f3-68c0-cb2f392c388b
Seems like it tries to find a site with the machine name, not the host name registered in the Alter access mappings (like portal.acme.com) .
I would appreciate some feedback about this. Another posts with similar issues:
http://amolmeshe.blogspot.com/2013/05/sharepoint-2013-request-management.html
http://www.akspug.org/Blog/Post/4/Request-Management-and-Error-8316
Regards,Hi,
According to your post, my understanding is that you had an issue about the Request management service with SSL sites.
It’s a known issue that the request management service could not work with the SSL site.
We had already reported the issue to the product team, as a workaround, if you want to use the request management service, you can change the https site back to http.
What’s more, the SharePoint 2013 SP1 has been relased, you can install it to check whether it works.
http://support.microsoft.com/kb/2817429/en-us
Thanks & Regards,
Jason
Jason Guo
TechNet Community Support -
WCF service fronted with SSL enabled NGINX load balancer shows HTTP based WSDL url instead of HTTPS
Hi,
I have WCF service hosted using IIS 8.5 on application server. And application servers are fronted with NGINX load balancer with SSL enabled. Backend communication protocol between NGINX to application server is http.
When customer visits public domain url (https://xxx.com/service.svc), they can see the WSDL url with http://xxx.com/service.svc?wsdl.
What change should I make so that WSDL url will have https instead of http ?
This is service side configuration.
<system.serviceModel>
<services>
<service name="Service.IService">
<endpoint address="" binding="basicHttpBinding" bindingNamespace="http://xyz.com/Service" name="Service_Endpoint" contract="Service.IService" />
</service>
</services>
<bindings>
<basicHttpBinding />
</bindings>
<client />
<behaviors>
<serviceBehaviors>
<behavior>
<serviceThrottling maxConcurrentCalls="5000" maxConcurrentInstances="2147483647" maxConcurrentSessions="5000" />
<serviceMetadata httpGetEnabled="true" />
<serviceDebug includeExceptionDetailInFaults="true" />
</behavior>
</serviceBehaviors>
</behaviors>
<serviceHostingEnvironment multipleSiteBindingsEnabled="true" />
</system.serviceModel>
Thanks in advance !!Hi,
For this scenario, you could just enable SSL in IIS to get HTTPS endpoints. If your service is exposed at https then you configure the same using “httpsGetEnabled”:
<behaviors>
<serviceBehaviors>
<behavior
name="MyServiceTypeBehaviors"
>
<serviceMetadata
httpGetEnabled="true"
/>
</behavior>
</serviceBehaviors>
</behaviors>
For more information, you could refer to:
http://www.codeproject.com/Articles/327260/What-s-new-in-WCF-Automatic-HTTPS-endpoint-for
http://blogs.msdn.com/b/brajens/archive/2007/04/26/accessing-description-metadata-wsdl-of-wcf-web-service.aspx
Regards -
Integrate ES Workplace Service Registry with Developer Studio CE7.1 (Trial)
Hi All.
I think that the configuration is in the following path on Visual Studio, but on my installation I donu2019t have this path:
Window ->Preferences -> Web Services -> SAP Services Registry
I see this on the following demo:
http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/2076831c-efce-2910-7582-ff2b4495d81b?prtmode=navigate
Does anyone have an idea how to solve this issue?
Thanks,
Best Regards,
CDOn the following path of the VS help:
SAP NetWeaver Developer Studio Documentation > Developer's Guide > Developing Java EE 5 Applications > Tasks > Creating and Configuring Web Services and Web Service Clients > Providing Web Services > Providing Web Services Outside In
I found:
"To import a WSDL document from the ES Workplace, configure the SAP NetWeaver Developer Studio to connect to the ES Workplace. In the SAP NetWeaver Developer Studio, choose Window -> Preferences -> Web Services -> Service Registry, and enter the following settings:
UDDI Server Name: sr.esworkplace.sap.com
UDDI Server Port: 80
Inquiry Path: uddi/api/inquiry"
But on this path I don't have this parameters !
I have:
Server:
Port:
HTTPS Port:
Use HTTPS: -
Help needed creating Web Service Proxy with SSL
Hi All, I really need your help. I need to create a Web Service proxy for a web service which is SSL enabled and developed in Netbeans. I have been given keystore as well as certificates files and I have copied "keystore.jks" in my c:\Documents and Settings\<user> and the certifcates to <JAVA_HOME>\jre\lib\security\cacerts. Now when I run the Proxy creation wizard and give the location of the WSDL file, JDeveloper gives an error "Error importing schemas: Default SSL Context init failed: Invalid keystore format". Can anyone please guide me what I am doing wrong here. I will appreciate your help.
Thanks in advance.
JohnI am using JDeveloper 10.1.3.3.0. Thanks Heaps
-
Windows 7 is not allowing me to install Apple Mobile Service Support with iTunes. Help?
I'm using a Windows 7 brand new computer. Im able to install iTunes correctly, but I have an iPhone and the Apple Mobile Device Service Support will not install. I need that software in order to sync my phone. So far I have extracted the files and tried to install the service separately, and it couldnt because my system "has not been modified". Please help! I need my phone synced ASAP!
Thanks for taking the time to respond and for doing it so quickly!!
Oh wait, that article is incorrect for what I need it for. I probably should've clarified. I still have the old computer, but I don't want to have to continue using it. -
Crystal Reports export and print fails with SSL / https but works with http
Windows 2008 Server, 32-bit (IIS7)
ASP.NET 2.0
Ajax 1.0
Crystal Reports version 10.5.3700.0
http: printing works, export works
https: printing not working, only export to MS Excel and MS Word work.
I am able to generate reports using both http and https, and the toolbar icons are all showing. However, I am unable to print or export properly with SSL.
Printing prompts me with a select printer window, and then a window 'Retrieving Page 1' follow by two messages from Crystal Print Control both stating:
A communication error occured. Printing will be stopped.
Exporting generates various errors depending on which export method is being selected (however Excel and Word work over https).
I've found the same problem on this site and other forums, but never a resolution to get exporting and printing to work with SSL. Will someone please provide me assistance or possibly relay what settings they're using if they have Crystal Reports export or printing working over SSL in IIS7? Everything works fine when I change the address from https to http.
Please let me know if I can help by providing further information. We've gone through a great deal of possible solutions with code and I'm currently looking in to IIS settings again.
Thank you.Thanks Ludek. I got it by searching KB number.
Unfortunately, it didn’t fix my problem even my IE (IE8 and IE 9) has correct setting. I double check my version. PrintControl.CAB is version 10.2.0.1146. we use VS 2005 Crystal report and VB .NET. It works fine on HTTP. But when we use HTTPS (SSL Certificate from go daddy).
1: Crystal report export
Export to MS Excel, Word: pop us “File download”, then click “Save”. It says “Internet Explorer cannot download ReportView.aspx from my site. Internet Explorer was not able to open this internet site. the requested site is either unavailable or cannot be found. Please try it again later”
Export to RPt, Rich text format: It says “Internet Explorer cannot download ReportView.aspx from my site. Internet Explorer was not able to open this internet site. the requested site is either unavailable or cannot be found. Please try it again later”
Export to PDF : nothing happened.
2: Print:
Pop up dialog to select printer, click “Print” “. Shows windows “Crystal Report Viewer” and pop us error message box. Title is “Crystal Print Control”. Message is “An communication error occurred. Printing will be stopped”. Click “OK” and pop up error message box again.
Please advise.
Thank you very much! -
I am going around in circles trying to establish my original Administrator's name and password so that I can install much needed updates.
I have my User ID and password. Advice please!Yet another update,
So I got an email back earlier from complaints as i said in previous post, as soon as i got back home from work I called it. Spoke to the first person who put me through to Options, again I told them my problems and they looked through my notes and told me that they couldn't help and transfered me to another department. I then went through all my issues yet again and again was told I needed to be transfered to another department to downgrade. I got put through to Options (where i'd previously been transfered from) this time I got told that they could downgrade me but need to speak to a different person in Options, so again transfered to someone else. This time they said that they will do it, started giving me the details of the new package and was just about to give me a date when they said that because of a technical issue with the way my account was set up they could not continue. Was then told that the order will be handed to the offline team and will be contacted (no time scale given). So annoyed right now!!!!! -
IOS 5 and DPS issue? Trouble shooting help needed.
I have a reader with a problem. I can't seem to tell him what the problem is and how to fix it. He is the only one that I know of with the problem. Turns out the story the problem happens on is also the story he wrote for the latest issue.
He has an orginal iPad 1, running iOS 5 (I do all my proofing etc off a iPad 2)
My DPS App was updated to v24 to address the crashing issue once iOS 6 came to be. Prior to this current issue being made available.
The first two issue I produced were v23. Latest folio and the one with the problem is a v24
He says he has updated the app itself to the v24 version
This is what he reports keeps happening.....
No matter what I do as soon as I open the current issue and go to my column, on the 3rd page where it says "Make Your Personal Weather Apps" when I press where it says "PRESS FOR INTERACTIVE DEMO," the trouble starts. The demo proceeds for 3-4 pages and then crashes, completely wiping out the entire file. Then I have to go back to the home screen and completely download the entire issue again. I've tried this at least six times, and get the same frustrating results every time !!
Are there known issues with orginal iPad 1's and DPS?
Did he think he downloaded the most recent version of the app?
Is there a real problem? That I can fix?
Wait to see if any one else complains?
Thanks in advance.Thanks again for the help. Here are the IRQ Settings:
IRQ 00 Exclusive System timer
IRQ 01 Exclusive Standard 101/102-Key or Microsoft Natural PS/2 Keyboard
IRQ 03 Exclusive Communications Port (COM2)
IRQ 04 Exclusive Communications Port (COM1)
IRQ 06 Exclusive Standard floppy disk controller
IRQ 08 Exclusive System CMOS/real time clock
IRQ 09 Shared Microsoft ACPI-Compliant System
IRQ 0A Exclusive MPU-401 Compatible MIDI Device
IRQ 0C Exclusive PS/2 Compatible Mouse
IRQ 0D Exclusive Numeric data processor
IRQ 13 Shared 3Com 3C900B-TPO Ethernet Adapter (Generic)
IRQ 13 Shared NVIDIA GeForce4 MX 440 with AGP8X
IRQ 14 Shared NVIDIA(R) nForce(TM) MCP Audio Processing Unit (Dolby(R) Digital)
IRQ 14 Shared Standard OpenHCD USB Host Controller
IRQ 15 Shared NVIDIA(R) nForce(TM) Audio Codec Interface
IRQ 15 Shared Standard Enhanced PCI to USB Host Controller
IRQ 15 Shared NVIDIA® nForce(TM) IDE Controller
IRQ 16 Shared NVIDIA nForce MCP Networking Adapter
IRQ 16 Shared Standard OpenHCD USB Host Controller -
Hello World,
after 10 years of LabVIEW experience I'm totally lost.
This is my first project with DAQmx and I don't know how to handle it.
My setup: Windows7; LabVIEW 2012 DevSuite; X-Series USB-6366
My goal: Trigger the encoder value and 2 Analog Inputs
I would like to get one result for the encoder value and each of the two analog inputs for each change of the encoder value (not more!!! I don't want to sort a huge amount of data afterwards)
I've been able to configure it with the Measurement and Automation Explorer, but have no clue how to get this in a LabVIEW configuration.
All examples I could find are reading the analog Inputs and the Encoder with SampleClock. That's not what I'm looking for.
I would greatly appreciate if someone could guide me to my solution.
I've attached the exported confiuration of the Measurement and Automation Explorer.
Thanks in advance, best regards,
Balze
P.S.: Sorry I had to ZIP the *.nce file, because NI doesn't allow to attach *.nce files
Solved!
Go to Solution.
Attachments:
configData.zip 290 KBHi RupiDo, hi Kevin P.
thank you for your effort and your willingness to help me. I aprreciate it!
@ RupiDo:
I'm aware of the DAQmx Timing.vi but where do I find I/O filtering (which context menue?)
DAQmx is a Monster for me. It's for sure felxible and powerfull but how to configure it is not obvious for me. Also the dependencies are unclear to me. I tried things and get an error at run-time that this or that is not supported, reserved, ....
Nyquist Shannon doesn't matter very much for my task. I measure DC voltages with litlle changes. But thank you for pointing this out.
Retriggerable property node?? Where's that? (This maybe not obvious for me, because it's a german LabVIEW I've got to work with)
@ Kevin P.:
Yes, it's a quad-encoder with A,B and Z but Z is still unused (and will be unused for now)
I've got similar problems to setup your solutions.
When I try to configure "Change Detection" I get error messages, that it's not supported. "allow buffer overwrites"??? I seached for it very thoroughly,but without success.
I looked at a lot of examples but always found solutions with buffered aquisition. I'm already willing to use buffered aquisition, but I even can't setup this.
I FEEL SO STUPID Over 10 years LabVIEW experience and the first DAQmx project let's me stumble.
I tried a buffered aquisition based on an NI example. But it only works for one analog input channel. The other brings up en error (-50103). Which one of the two analog channels brings the error is randomly.
Maybe someone could explain me, what leads to this error, that I could start understanding DAQmx.
I've attached the VI (LV2012) and screenshots of the frontpanel and the blockdiagram.
Thanks in advance, best regards
Balze
Attachments:
Meas Angular Position-Buffered-Cont-CtrClk-1.vi 72 KB
vi_panel.png 95 KB
vi_block.png 87 KB -
The ColdFusion ODBC Server service has not been installed, HELP!
My applications are crashing because recently we rebuilt our server and coldfusion will not install the ODBC server srvice that I need for our access databases. I can still use the Access with Unicode driver but my applications are crashing where there is a text input field and more that 255 characters is being entered. The field is of 'memo' value already in access which is sussposed to support up to 65,000 characters. Does anyone know how to install this because I have reinstalled CF 8 like 3 times on our server adn the only answer I have found to fixing my errors is taht the Unicode driver is crashing them but I cnat use regular access driver because the ODBC service wont install. Please help adn dont ever use access db if you dont have to.
Thanks,It worked finally, got it to work. This link is what worked for me but I couldnt get it ot work before. http://kb2.adobe.com/cps/402/kb402637.html
So i exchange the datasource.cfc files like it says then I just put the installODBC.cfm in the CFIDE folder and went to http://myserver/CFIDE/installODBC.cfm and ran the application but had abother problem with authentication ,"the user does not have permission" so I opeened the installODBC.cfm in an editor and noticed that the line said, adminObj.login("admin"); which wanted a default password for the system setup but if you have your own password setup for security reasons (which you should) it wont run. So go into you CFAdmin, then go to Security > Administrator > then select no authentication needed the try to reload the installODBC.cfm page and it will execute and say that "ODBC Services installed". Then change back to having a single password needed.
Good Luck if you ever have this stupid problem...
Maybe you are looking for
-
My Apple ID wont let me log in.
My Apple ID password doesn't work with my iMessage, Facetime and Twitter app. Even though I am (positive) entering the correct password, it is rejected. I've tried resetting my iPad 2 many times and tried all the tricks I've read here and still wont
-
How do I fix this error message??
How do I fix this error message "This message could not be delivered and will remain in your Outbox until it can be delivered. The SMTP server "smtp.mac.com" doesn't support TLS (SSL) on port 25. Please check your account settings and try again." ThA
-
ok ...got a fab new ipad...can't get it to go past language choice!!! help
-
MacBook Pro looks for a server I no longer have
I had a Drobo-FS connected via Ethernet. I no longer have it but some programs complain they can't find the server Drobo-FS after a long timeout. Is there a place I can look to delete it from the list of servers? I have a MacBook Pro Retina, OS-X 1
-
Folders in Business Area have lost their Owner
I have several Business Areas that have folders which have lost their Owner. I need to update the Owner to APPS in the business areas where the current owner is NULL. Can someone confirm that the only place I need to update the Owner for Discover