OC4J -Time out and Oracle sequence problem

hi
i m using OC4J to access application which is using java as front and
and we using oracle sequence with cache as 20.
so when i accessing application thro' network my sequence skip from 20
mean 1-21-41-61 is it possible due to if lost connection opened from java for oracle thro' OC4J ? will it keep cache ?or lost ? is it really time out error?
if then hw to set time out in oracle?
u can refer below link
Re: ORABPEL-05002

i think i may be having the same problem. My table is savings entries out of order. I would assume that each row saved would be in sequence number order...instead it goes from like 963, 964, 678, 679, ....??? wonder why it would place new entries in front of older entries in the table???

Similar Messages

Exchange 2013 issue / OWA time-out and WiFi/Cell problem.

Hi everybody,
I'm having some issues with an Exchange 2013 server.
When some users try to logon to the OWA page it keeps loading the page and ends with a time-out.
This only applies to 6 or 7 users, other users can login and open the page.
I tried to replace the signed certificate to solve this problem, and did a online analyzer check, most tests come out good.
I can't seem to find the source of this problem.
There are also multiple users that are having trouble to receive e-mail through the wifi on phones and tablets at home but when they switch to 3g it works fine.
You might need more information, just ask.. i don't know where to search anymore.
I tried inheritance on the AD, disabled SSL in the IIS, restarted the server, replaced the signed cert. etc.
Update:
I set the selfsigned cert in the IIS default web page,, to check if it responds to the certificate and it does, so the issue doesn't come from the certificate.
This issue probably came up after CU1, and i've read something about healthboxes..
I'm going to install CU6 and hope for good result.
Kind regards,
Tim

I've installed CU6, only one of the six users have gained access to OWA or ECP.
Al the other users won't get a logon screen, just a blank page.
So there is no option to insert a username or password to login, the page keeps loading and ends with "the page cannot be displayed"
But on my working spot i can open owa or ecp without any issues.
I've recreated the virtual directory for ECP and OWA with powershell, and checked the certificate.
I checked if the same certificate was connected to the back-end port 444, and this is set correct.
I even reconnected the cert on 444 with the following.
Open the Command Prompt
Run-
netsh http show sslcert
This will show the certs, copy and paste this information into notepad. Under IP:port : 127.0.0.1:443, note the certificate hash and application ID.
Run this command- (Yes, I know there is no :444 listed in the output from the earlier command.)
netsh http delete sslcert ipport=0.0.0.0:444
Run this command. Replace certhas with the certificate hash and appid with the application ID you saved in notepad.
netsh http add sslcert ipport=0.0.0.0:444 certhash=123123123123123 appid="{123123123123-1231231235}"
I used powershell to set the login authentication,
et-Owavirtualdirectory -identity "YourMailBoxServerName\owa (Exchange Back End)" -WindowsAuthentication $True -Basicauthentication $false -Formsauthentication $false
set-Owavirtualdirectory -identity "YourCASserverName\owa (Default Web Site)" -WindowsAuthentication $True -Basicauthentication $false -Formsauthentication $false
and iisreset /noforce
I unchecked the "require SSL" on the default website and left it enabled on the owa and ecp etc.
Checked if HTTP over Proxy is installed, but this one is need to install exchange 2013.
I've checked all ECP/OWA directories in in the IIS, the directories point to the Exchange V15 folders, this should be correct.
Something is really broken, i really can use the help..
I'm going to try to install Exchange 2013 SP1, but i don't know if this one is needed when CU6 has been installed.
The strange thing is, it seem to be location based, not user based.
I can login perfectly, but when i try this at one of the employees, it ends up blank.
When i try to connect on a location dat does not work, at the exact time i press the enter-key to open the page, the eventviewer logs the following:
Event 4634 - An account was logged off.
For the issue on the smartphones and tablets, everything worked fine a few months ago, and happens to users on different ISP connections.
I already checked the inheritance settings on the users in the AD.
Kind regards,
Tim

Just bought the ipad4 and can't log into facebook. Times out and tells me to check my network connection. Anyone having the same problem or any ideas?

Just bought the ipad4 and can't log into facebook. Times out and tells me to check my network connection. Anyone having the same problem or any ideas?

Hey barnsieno10,
Thanks for using Apple Support Communities.
Looks like sign in issue, This article is a great resource for the message you are receiving.
FaceTime, Game Center, Messages: Troubleshooting sign in issues
http://support.apple.com/kb/ts3970
Have a nice day,
Mario

Hi, every time i try downloading ios5 it reaches 100% and then the connection times out and nothing happens after that; though the internet connection is fine as i can access other sites etc. what could be the problem?i tried using 2 different modems.

Hi, every time i try downloading ios5 it reaches 100% and then the connection times out and nothing happens after that; though the internet connection is fine as i can access other sites etc. what could be the problem?i tried using 2 different modems. Where can i download the ios5 from as my itunes is on my desktop which uses windows xp. Please help

Download iOS 5.1
iOS 5.1 (build 9B176) is compatible with iPad 1, iPad 2, iPhone 3GS, iPhone 4, iPhone 4S, iPod touch 3rd & 4th gen, and iPad 3. Additional builds are available for Apple TV 2 and Apple TV 3. The below download links are all direct downloads of iOS 5.1 from Apple.
iPad 1
iPad 2 Wi-Fi
iPad 2 GSM (AT&T)
iPad 2 CDMA (Verizon)
iPad 2,4
iPhone 3GS
iPhone 4 GSM (AT&T)
iPhone 4 CDMA (Verizon)
iPhone 4S
iPod touch 3G
iPod touch 4G
iPad 3 Wi-Fi
iPad 3 GSM
iPad 3 CDMA
Apple TV 2 (9B179b1)
Apple TV 3 (9B179b1)
Source: http://osxdaily.com/2012/03/07/ios-5-1-download/

Process chains time outs and hangs with no error msg - in SP13

Hi all,
We are having all kind of weird problems after we patched our system with SP13. Our process chain time outs and hangs, but surprisingly we never get any error msg. And scarier part is, the problem seems to be intermittent. PC runs fine on some days and hangs on some.
Further analysis into the dump as below
Termination occurred in the ABAP program "SAPLRSSM" -
in "RSSM_SLEEP_DEBUG".
The main program was "SAPMSSY1 ".
In the source code the termination point is in (Include) program "LRSSMU39".
This refers to an issue that appears to have been addressed by OSS Note
934648(meant for SP8). This notes also indicates to populate RSADMIN table to
exclude "RSSM_SLEEP_DEBUG". Not sure if this note is valid for SP13? However we went ahead and populated the RSADMIN table.
So now we have no clue whats going on and where to fix the issue.
As per SAP suggestion we applied the following notes:
0000653996 Analyzing lock situations
0000893563 Correction: Deadlock on completion of a remote chain
0000994007 Corrections: Deadlock with external status query
0001005481 Correction: Process successful, but there is no instance
0001047174 Correction: Incorrect scope when locking in process chains
0001051957 Correction: TIME_OUT during dialog confirmation of processes
0001083660 Report for error stack analysis
Nothing seems to help us. And SAP suggested a few options, which we implemented to no rescue.
Im sure that many of the customers have applied SP13, and want some feedback from them, if this is happening in their systems too?
If so, how did you fix this issue?
Or this situation is unique to us?Please note that no settings were changed as of SP13 to that of what they were in SP12(unless it is a side effect of the patch itself). Everything worked fine with SP12 and is still working on the BIP system. All the problems are in BIQ patched to SP13.
Any pointers or insight would be appreciated. We have a customer msg open with SAP, and going back and forth, but nothing seemed to work as of today.
Thanks,
Voodi

Not sure which OSS helped us get past the issue, as SAP asked us to apply a ton of notes. But along which the notes, SAP has some suggestions for us, which we think did the magic. After the implementation of the suggestin we never faced the same issue again. The suggestion by SAP:
move the process chain callback in a batch job by executing
program RSSM_TRACE_SWITCH and selecting the flag "verifcation
of asynchronous processes - execute in batch".
Lemme know if this doesnt fix the issue, I can give all the notes that SAP asked us to apply.
Message was edited by:
voodi

Airport times out and have to restart

airport times out and have to restart constantly

I have exactly the same problem. It started a few weeks ago and the helpline could not work out the problem, so they sent me a new HUB 2.0. Ever since, the broadband connection keeps stopping every day several times a day, which is a real pain as I work from home.
I've just ran InSSider and there are two NETGEAR SSIDs on the same channel as mine (11). Would this affect / be part of problem? There are other SSIDs on channels 1,6,7 and 13. Not very techie, so would appreciate very basic advice!

Trouble sending small MP3 files using firefox version of my AOL e-mail..times out and refuses to send. Works in Safari. Why?

If I try to send Mp3 files over e-mail using Firefox..it times out and says 'Encountered an error. I have these MP3's compressed to under 1 MB..like 756kb..so size is not an issue. No problem when I open my e-mail in Safari

Hi petro_jemes,
Just a little claritification, you need to add the value to the variable "[string]$ou", and also change the language in the variable "$emailbody" in the function "Get-ADUserPasswordExpirationDate".
I hope this helps.

My iPad 2 will not allow me to update my apps. When I hit the update button I get a spinning circle but then it times out and doesn't update. Please help.

My iPad 2 will not allow me to update my apps. When I hit the update button I get a spinning circle but then it times out and doesn't update. In the past when I have updated successfully, the spinning circle would show me an indicator of time left on the update. I no longer have this Indicator. The circle just spins and times out and nothing happens. I've reset the iPad in the settings menu, reset the router, logged in and out of Apple id, powered ithe iPad off and on, and tried a couple other "fixes" that I've read online. So far no luck. AAny help would be greatly appreciated. Much thanks!

How much free space do you have? If it is low, installers may not be able to run properly.

HT203200 I have a song that I purchased from Itunes on my Iphone and there was an error downloading. Every time i try to download it times out and says to try again. I have tried several times and still get same message. Help?

I have a song that I purchased from Itunes on my Iphone and there was an error downloading. Every time i try to download it times out and says to try again. I have tried several times and still get same message. Help? I have been charged for this song but have not been able to download.

Go here:
http://www.apple.com/support/itunes/contact/
and follow the instructions to report the issue to the iTunes Store.
Regards.

I had to restore my iPad mini. Now when I go to the App Store and tap the cloud to reload some of my apps, it times out and they won't load. Any suggestions?

i had to restore my iPad mini and when I go to the App Store to reload some of my apps it times out and doesnt reload them. Any suggestions?

Close the App Store app and reset your iPad.
Now close all apps. In order to close apps, you have to drag the app up from the multitasking display. Double tap the home button and you will see apps lined up going left to right across the screen. Swipe to get to the app that you want to close and then swipe "up" on the app preview thumbnail to close it.
In order to reset your iPad, hold down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple logo appears on the screen after which time you can release the buttons and let the iPad start up.
IF that didn't help, try turning WiFi off on your iPad in the Settings, restart the iPad, then turn Wifi on again.

I have a Mac Book and purchased a Bose system that uses an antenna to play music from the the laptop - it works great, but the computer times out and shuts down - Help

have a Mac Book and purchased a Bose system that uses an antenna to play music from the the laptop - it works great, but the computer times out and shuts down - Help

Check in "System Preferences">"Energy Saver" to see if you have the "Computer Sleep" bar set too low.

I can see my Canon MP600 usb connected to Airport Express through Bonjour on my Windows XP. But, when installed by Bonjour, the printor time-out and can't print anything. Any idea what to do?

I can see my Canon MP600 usb connected to Airport Express through Bonjour on my Windows XP. But, when installed by Bonjour, the printor time-out and can't print anything. Any idea what to do?

Thanks for the quick reply.
So am I correct in saying trying to utilise the Airport Express to access the printer over the network was a wasted effort due to the latest iOS? I had read up on the express before purchase and believed that was one of it's main purposes.
Thanks again for the help.

Authentication time-outs and delays

hello
we have got a scenario which our enterprise environment discovered as authentication time-outs and delays , the all authentication is NTLM only , we also using many devices such as smartphone and other moiled components ,any option or way to get fix
that kind of issue
thanks in advanced
ivan bikmbauer

On Mon, 25 Aug 2014 11:37:47 +0000, Shuki Noy wrote:
ask me security question
but ask something very complicated
This has nothing to do with your technical knowledge, the issue here is
that you're artificially attempting to increase your forum points by
creating fake profiles, posting "questions", posting responses using your
own profile and then using the fake profiles to mark your own responses as
"answers".
I am not going to continue this discussion in the forum as it is off-topic
and wastes everyone's time.
I notice that you didn't answer my questions about your TechNet Gallery
contributions.
If you want to continue this discussion then you can do so over email. My
email address is pkadare @ gmail.com
Paul Adare - FIM CM MVP
"Quoted-Printable: a standard for mangling Internet messages
Quoted-Unreadable: the result of applying said standard
Unquoted-Unprintable: the comments from the recipients of the above" -- bf8

ORA-12535 TNS:Operation time Out and ORA-12154:TNS Could not resolve servic

Greetings!!!
I have installed my Oracle Database 10g & Developer Suite 10g in Windows XP Pro Machine. Oracle Application Server 10g is also installed in Windows 2003 Server machine.Both machine have different domain.When using Form Developer Suite OC4J to run my form program, i can connect to the database properly run the form perfectly.
Problem encountered.
When I tried to run the form using Application Server 10g(installed in Windows 2003 Server), I got an error ORA-12154:TNS Could not resolve service name when connecting to the database and I got an error ORA-12535 TNS:Operation time Out when using TNSPing. I checked both the configuration of TNSNAMES.ORA(database & Application SErver) using the same port & service name but still got the same error.
Hope somebody can help me out there...
Many thanks in advance.
Regards,
BTF

I have seen this before with my setup, I found that I had to go into the net configuration assistant, and change my host name to the fully qualified name, example: my compuer name is computer1, I had to enter in computer1.OIT.Docfinity.com for it to take. That has always gotten me past that TNS error, just my 2 cents, hope it helps.
keep on keeping on.

Oracle sequence problem in CMP Entity EJB

I have a problem with Oracle sequence when I am using from the CMP entity EJB in WebLogic
6.1:
The problem is when the WebLogic server starts it acquires the correct sequence number
from Oracle, but during the runtime, when I open a new sqlplus window and increment
the sequence number, the container is not picking up from the new incremented value
instead it is still continuining by incrementing the old sequence number it has acquired
when it fetched from Oracle last time.
The sequence increment and key-cache-size in weblogic-cmp-rdbms-jar.xml are exactly
same
Any help would be greatly appreciated.

Change the key-cache-size to 1 in weblogic-cmp-rdbms-jar.xml and then try
your experiment again.
-- Anand
"Satya" <[email protected]> wrote in message
news:3d06274c$[email protected]..
>
I have a problem with Oracle sequence when I am using from the CMP entityEJB in WebLogic
6.1:
The problem is when the WebLogic server starts it acquires the correctsequence number
from Oracle, but during the runtime, when I open a new sqlplus window andincrement
the sequence number, the container is not picking up from the newincremented value
instead it is still continuining by incrementing the old sequence numberit has acquired
when it fetched from Oracle last time.
The sequence increment and key-cache-size in weblogic-cmp-rdbms-jar.xmlare exactly
same
Any help would be greatly appreciated.

OC4J -Time out and Oracle sequence problem

Similar Messages

Maybe you are looking for