OC4J_WIRELESS - FUNCTION YOU TYPE PREVIOUS OR BACKSPACE webpage has expired
When in a function you type previous or backspace the page you left gives “webpage has expired”. This worked in previous release of application server but now does not work in current release of we upgraded too.
This is a critical issue for our client as it makes them go back to the main menu and start the function over again. We need to be able to backspace to the previous page in /ptg/rm
We are running WiSM 4.1.185.0 and we just had the similar problem with one controller. The other three controllers were fine when it happened. The exactly issue was the nslookup failed(timed out) from the client, so the web login page won't show when people lunch the browser. A reboot of the controller fixed the problem. We have been running Cisco LWAPP for more than a year (from 4.0.155.5 to 4.1.185.0) and it is the first time we see this problem. TAC is still investigating the cause.
Zhenning
Similar Messages
-
How do you remove previous recipients from a message list? When I begin to type a number, I have numbers appear that are no longer in use, or are incorrect. They are not in my contacts list either.
I apologize. I didn't see that you hadn't updated to iOS 7. That's an iOS 7 option. With iOS 6, you'd need to restore the device as new. Note that that will result in your phone being updated to iOS 7.
Best of luck. -
D-Link DI-524: installation as wireless HUB/Bridge
General
ON ALL TYPES OF ROUTERS DHCP SERVER HAS TO BE DISABLED
ON ALL TYPES OF ROUTERS UPnP ALSO HAS TO BE DISABLED
OTHERWISE YOU CAN SEVERELY HINDER OTHER USERS IN YOUR NEIGHBOURHOOD!
Practical example: D-Link DI-524
The DI-524 is a wireless router.Although the manufacturer doesn't mention this, you can also install this device as a wireless hub.Of course this is not supported by the manufacturer. Therefor you have nowhere to go in case of any problems Plug in the power cord of the DI-524. Do not yet connect the network cable!Search for existing wireless networks with your computer. Connect with the router.This can for example be done like this:
Click the start-button (at the bottom in the left corner of your screen).
Go to control panel
Go to internet connections (you may have to choose classic representation first)
You can now see your wireless network card, among other things. Right-click and 'View available Wireless networks'.
Connect to the router. In most cases the router will be called 'default'.Check your IP-address: you get an IP address from the DI-524
Go to the start-button
Go to 'Run'
Type 'cmd' and press enter
type 'ipconfig' and press enter
your IP address starts with 192.
Surf to your router with your regular browser. For this you need the address and a password, which you can find in the documentation.
In this case the address is 192.168.0.1
Now you must secure the router. For this it is best to use WPA-PSK
Your key is a randomly chosen sentence. Don't make this sentence too short.
Warning: Case sensitive!
You cannot reach the router anymore now.
Go back to your network card via "make connection". Search for your wireless network again and make a new connection
You are asked for a key. Supply this key the way you configured it in your router.
Surf back to the router.
Disable the DHCP server.
!! YOU HAVE TO DISABLE UPnP ON ALL TYPES OF ROUTERS
OTHERWISE YOU CAN SEVERELY HINDER OTHER USERS IN YOUR NEIGHBOURHOOD!
for this, go to Tools, Misc and switch off UPnP
Save these settings.
If you do not have a D-link router, look up in the manual or somewhere else where you can disable UPnP
Now you cannot reach the router anymore again.
It is only from this moment that you can connect the router to the modem.
Important: Use one of the 4 LAN ports. Never use the WAN port!
Go to your network card via the control panel. Right-click and "Repair"
Now you should get an IP-address in the range of 10.nnn.nnn.nnn
If you still don't have 192... you've made an error. The DI-524 still functions as a router and this is not allowed!There are no Mac based instructions. The router is accessed and adjusted the same way whether you are using a Mac OS X, Windows or Linux. As noted in the other post it is done through your web browser which works the same from any computer. Even a Chrome Book.
akertrav wrote:
Thank you for that what I have been trying to do is extend the range of my wifi witha second dilink router. I was hoping for some mac based directions to achive this rather than the PC based as presented. Thank you for your ireply Paul -
How can I disable "search as you type" in Finder windows?
I have used OS X since it first came out and have upgraded to each version since then. I am now on Lion. I have endured "search as you type" for as long as it has been a "feature" and I must say that I am fed up with it, mainly because it slows me down. It makes the computer "get in my way," which is the very anathema Steve Jobs sought to destroy with Apple. My Mac should be a friendly tool that doesn't get in my way. Most of the time it is, but not when it comes to Finder searches.
Toward that end I wish to disable "search as you type" (or whatever the offical name for it is). More specifically, I want to disable it in the search bar in the upper right corner of Finder windows.
I don't care about the Spotlight menu in the menubar, as I never use that and don't want to train myself to use it. And I refuse to use an alternative search utility to Spotlight. I want to use the search field in the upper right corner of Finder windows, AND NOTHING ELSE. But at the same time, I want to kill "search as you type." I want to be able to type as fast or slow as I like and have my computer not search for anything at all until I hit RETURN. I don't want to argue about it. That is the way I want it. And again, I don't want to use a 3rd part utility, no matter how glorious some people may say they are because I stubbornly want to use the search bar atop every Finder window EXCLUSIVELY.
Therefore, is there some Terminal hack to accomplish this feat? If so, what is it?
Many thanks for your time. I look forward to hearing your solutions.
--James WagesHaving posted the initial question more than 1 week ago now, I must say that I am quite shocked and dismayed that not a single experienced individual among us in these forums has the knowledge to even approach my question! Not even a reply to say "it cannot be done"! Forgive me for being brash. But is everyone on vacation? Or does no one know? Or is everyone truly apathetic toward the existing functionality?
If our computers were so lightning fast that "search as you type" was instantaneous (i.e., displayed results a 50ms or so, and faster than I could notice such that my fingers were not slowed down at all as I type), I wouldn't have taken time to write about this. But I put forth the initial question because of the inherent slowness of "search as you type" and therefore I wish to know how one would go about disabling it on an OS level (i.e., without having to resort to a third party app).
I look forward to your insightful replies!
Thank you. -
Date Function to get Previous week
Is there a date function to get
Let us say today is 23rd of Jun 2009
I want a date function to get previous Thursday 18 Jun 2009
and another function which get 7 days before which is Friday 12 Jun 2009.
FYI: For the current week, I was able to use:
select next_day(case to_char(sysdate,'Day') when 'Thursday' then trunc(sysdate-1) else trunc(sysdate) end, 'Thursday')
from dual;
select next_day(trunc(sysdate-7), 'Friday') from dual;
I want something similar to that.
ThanksNo, not separate functions, but you can tweak next_day to get what you want:
select trunc(sysdate) today,
next_day(trunc(sysdate)-1, 'THURSDAY')-7 last_thursday,
next_day(trunc(sysdate)-1, 'FRIDAY')-14 prev_2nd_friday
from dual;
TODAY LAST_THUR PREV_2ND_
23-JUN-09 18-JUN-09 12-JUN-09 -
Dear friends,
Can any one tell me what is the purpose of the function profile type and what is the different between ic webclient profile and framework profile?
Best regards,
Mohamed
Moderation: Locked. Please, try to find an answer first. See rules of engagement.
Edited by: Joaquin Fornas on Feb 20, 2012 9:28 AMIt defines which functions you're using.
For example function profile 'IC_INBOX' defines the settings you're using for the Agent Inbox.
The value is the link to the settings profile. In this case for example, you could use value 'Z_INBOX_SET' -
How do you type directly on a document in Adobe 10? I used to use the typewriter in Adobe 8
How do you type directly on a document in Adobe X? I used to use the typewriter function in Adobe 8, but I don't see that in Adobe X.
It's now called "Add or edit text box".
http://blogs.adobe.com/acrolaw/2011/01/where-is-the-typewriter-tool-in-acrobat-x/ -
Please help if you can, I have a function that does the
filter as you type working, where it scrolls to the postion in the
list. But if I arrow down or Enter, it jumps back to the beginning
of the list.
public function positionVendor ():void {
var txt:String = varVendor.text;
var srch:String;
for (var sInt:int;sInt < vendorListArray.length;sInt++) {
srch = vendorListArray[sInt].label.substr(0,txt.length);
if (srch.toUpperCase()==txt.toUpperCase()) {
varVendor.open();
varVendor.dropdown.scrollToIndex(sInt);
//varVendor.selectedIndex=sInt;
break;Hi Marty,
I'm not sure to well understand the question, but if i do this link could probably help you:
http://my.opera.com/dominionspy/blog/2007/02/26/an-advanced-custom-search-form-for-adf
Good luck,
Tif -
Making a text box expand as you type into it?
I was wondering if it is possible to make a text box (or any kind of box) expand as you type into it. Currently the box does not have a caption, I simply want to allow the value box to expand as i type into it. It would also be great if it would expand to another page...does anyone know if this is possible and if so how can i do it?
Any help would be greatly appreciated and, yes, that is a mess x about 17. The good news is I didn't design it -- the bad news is I got tagged to try and fix it.
I'll try to answer in order:
You haven't used any subforms so it's not going to work as-is.
I don't think whoever did the initial form knew about the subform issue so no provisions made for them.
I won't have time to look at it closely until tonight. Some questions/comments in the meantime:
Do you really need 2 master pages - does that block need to be at the bottom of each page? Or is it just supposed to follow everything else.
the information is to be on the bottom of every page -- clients/workers need to sign each page to prove they have read the information
You've used tables to do a lot of the layout - probably not a good idea.
if we need to dump the tables, that's fine - I looked at the 7_Questions_Flowing.pdf from another thread and I can make it work
the way it needs to with the information in a header but they WANT it as a footer.
You've made the Content Area the full size of the page, better to size it what you want your margins to be.
ok, that should be the easy fix of the batch
You have no master subform (or any at all for that matter...)
my problem was I couldn't find a way to add a master subform that didn't give me that message. If I couldn't get that
one to work without the error message then none contained within would either ?? -
I am locked out of my iphone. In resetting my passcode I must have hit a wrong digit, because the 4 digits I thought I used Don't work (and of course not my old passcode). I have tried the instructions both for "if you have previously synced your device with iTunes" and "If you have Never synced your device with iTunes" . Neither has worked and I'm in a vicious circle with each time after lengthy downloads it still all ends with the program, & my phone, asking for my passcode to proceed. I'm not sure if I have ever synced to my mac book (i may have) but my address book seems to automatically update on both devices without the need to plug in. Thank you for any knowledgable help that could efficiently get me out of this passcode ****!
Hi DRussell,
If you have not sync'd your device to your Mac then you will have to force the phone into recovery mode and restore as a new device. Read the information in this link and follow the instructions to recover the phone:
http://support.apple.com/kb/HT1808
Hope this helps!
Cheers,
GB -
I have two different accounts on my iMac 2011 OCX 10.8.2. When you type text in one account, he dialed in the second account at a time. how to solve it?
I have 2 users on the imac. when entering text in the first account it is duplicated in the second
-
Does ECC 6.0 Provide a Search-as-you-type Enhancement for Sold-To Party Field?
In our quest to continually simplify the creation of sales orders, I would like to know if SAP has provided any way to simplify the search and entry of the customer sold-to or ship-to party. What I am looking for is a way to enter the customer's name (or other customer search criteria such as city) in a single field and have it search-as-you-type. This is also known as instant search, auto-complete and auto-suggestion.
We would like to eliminate the clicks it takes to use the standard F4 search help.
One of our internal developers has created a web-based (.NET) application that brings in SAP data for writing sales orders for a specific segment of our business. This tool allows you to find the ship-to party by typing in the customer's state, city, zip, address or name in the Ship-To field. The instant search feature narrow's the list down as you type. What he has done is written SQL to concatenate the customer name, customer number and address information, and then provided a search-as-you-type feature on top of this.
Fictious Example of concatenated data (State, City, Customer Name, Address, Zip, SAP Customer Number):
WA Seattle, Home Depot, 11616 Aurora Ave N, 98133, 18394978
Typing any of the above information in the field will search for matches and bring back results as you type.
I would like to know if ECC 6.0 has any similar feature that can be used in VA01 to accomplish the same thing.
Thank you.
Rob ScofieldI don't have access to the code our developer used but again, I am referring to a .NET browser-based application. We extract a subset of SAP data using Attunity (say, every hour) and the SAP data is stored in a separate SQL Server database. This database is used by a few browser-based applications we have developed. For example, we have an application that allows external customers or internal employees the ability to look-up the status of an order. The first thing you enter is the customer. In some cases, this may be the Ship-To. In other cases, the Sold-To. The user can simply enter some part of the customer and records are searched for a match, as you type. In our case, the lookup is occurring in SQL Server, not directly in SAP. The developer took a simple approach of using some SQL query magic (it may be in a SQL Server Stored Procedure), to concatenate the relevant customer information that most people use to lookup a customer - Customer Name, Address, Customer Number. So as you type, this entire concatenated string is searched and the list of potential "hits" is narrowed as you type.
The paradigm is similar to Google's Search as you type (SayT), which you can read about here:
http://www.theverge.com/2012/7/11/3152186/google-search-as-you-type-instant-results-merchants
http://code.google.com/p/search-as-you-type/
Or auto-complete: https://support.google.com/websearch/answer/106230
This is nothing new in the web commerce world.
I was told by an SAP rep that there might be an enhancement in SAP ECC (SAPGUI Desktop) that could do something similar. However, I never heard back from him and was wondering if anyone else had heard of something.
This is another example of how it seems SAP has fallen behind in their UI and search capabilities; and they need to catch-up. For those of us that have used SAP for many years, F4 seems straight forward and we sometimes don't understand why so many users don't also find it simple. The answer is, other vendors have made it more simple and with the consumerization of apps, SAP needs to get there.
Rob -
I recently bought an Ipod touch 2nd gen, (Ebay). It's in great shape and seemed to be wiped clean.
When I connect (via windows computer) to Itunes with usb cord the Ipod icon shows, but the only function you can do is eject. When its in the upper right hand corner and you click on it all you get is a done button, when it's in the side bar right click and your only option is eject, left click has no effect. If I go to "file">devices it's as if there are no devices connected.
I purchased a song with Itunes on the Ipod itself, and it transferred to my library on the computer automatically .
I have an Iphone 5 and a nano that are still functioning with Itunes thru computer so I'm thinking the issue is with the Ipod touch. I've reset it several times, rebooted it, with no change.
nothing on the internet has helped, I called tech support and got disconnected. Should I take it to a retail store? I just don't know where to go next, I'm of course willing to pay for tech or repair. looking for suggestions.Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
The system doesn’t recognize or capitalize the word (I) or the first word of every sentence. Another really annoying thing about the integrated mail on your Mac computers is the fact that the system learns the word as you type it more and more instead of highlighting it as incorrectly is this is a word that’s being misspelled. Can Apple fix this bug to make it user friendly as if you were using Office or a Word Document?
You hit the target CT.
It’s only fair that if Apple is going to integrate Mail into Mac PCs, it would be nice if the system does it for you like Office or perhaps Outlook. I just don’t to use Outlook although I have it installed and ready to use, but instead use Mail which comes with Mac OS already.
I hope to make some sense here. -
I'm using an online web mapping application that has input boxes for descriptive text and stuff like that. Sometimes I copy blocks of text from a word processing app into these input boxes because I can format the text in the wp. When I paste the text blocks, Firefox does the wiggly red underline on words it doesn't know. I've already turned off "check spelling as you type" but this doesn't make a difference. I don't want Firefox to check spelling on these text blocks that I copy and paste. Sometimes I need to capture screen images of these text blocks in the mapping application and I want them to look clean. Thanks.
Does "Check Spelling" in the right-click context menu has a tick when this happens?
You can consider to disable the spell check underline by setting the ui.SpellCheckerUnderlineStyle pref to 0 (zero) on the <b>about:config</b> page.
*http://kb.mozillazine.org/ui.SpellCheckerUnderlineStyle
Maybe you are looking for
-
DMS repository manager error at second level
Hello everyone We successfully installed the DMS Business Package in our portal, set up the back-end connection to our R/3 system, and now a couple folders show up when we view the Document Explorer iView. However... when I click on a folder, I rece
-
JWSDP 1.5 and Tomcat for jwsdp
Hi, I downloaded and installed both JWSDP 1.5 and Tomcat for jwsdp. I set the variables JWSDP_HOME,JAVA_HOME,CATALINA_HOME,ANT_HOME as usual. But, when I launch "catalina.sh run" I have the seguent warning.... INFO: Processing Context configuration f
-
RPM financial planning - units
Hello PPM experts, We use financial planning for our portfolio items. Currently all amounts are shown in the currency defined on the item with 2 digits after the decimal. This is far too detailled. Our project controllers would like to get the amount
-
Recovering RAID1 after non RAID boot
The system was setup to use 2 sata disks in raid-1 (mirror) configuration with Windows XP (SP1). Because of some other issues I did a bios update and forgot to activate raid in bios.... Windows XP booted up ok, propably doing some automatic driver up
-
Hi In my project, Intalio calles services hosted on OSB. The read timeout set in Intalio is 6 minutes (360 seconds). OSB calls backend and sends response back to Intalio server within 10 seconds. We logged both request and response payloads in OSB an