OC4J with EJB 2.1 release date?

Is there any release date available for the OC4J with EJB 2.1 support?

Hello Haug,
it's planned for summer 2005.

Similar Messages

Standard report with po released date

hi mm experts,
request pl let me know is there any standard report which gives the po details and release indicator with released date of po.
pl help.
regards
Srihari

Hi
U can get Po release date per release code, use CDHDR and CDPOS tables in SE16
Enter transaction as ME28/ ME29N, Enter the range date,enter the object value as PO number (PO number should be 10 digit if the PO is not 10 digit, then add zero value for the prefix).
Then you can find the release date
Rest details u can find from ME2N report i.e Po details and Release indicator using dyanamic selection
Vishal...

PR list with release date report..?

Hi all
Where we aill get the report of PR list with PR released date .
Thanks
sapmm

hi,
You can get the list of PR's from ME5A or from table EBAN etc...
BUt its not possible to get the exact release date...
It a biggest drawback..
Regards
Priyanka.P

No of Batches Released with Release date

Hi,
In my project, I need to find the no batches released with releases date.
Please help on this.
Thanks,
Mohan
Edited by: Mohan D on Jul 27, 2011 3:37 PM

Thanks for looking into my question.
I have a requirement like below.
For a given material and plant, I need to find no of batches manufactured, rejected , approved and released.
Based on QA status, I am able to see no of batches approved(QA status A), Rejected(QA Status R). But I do not know how to find/calculate no of batches released and also the release date.
Thanks,
Mohan

Release date for iPod Touch with camera?

Is it true that they will release an iPod Touch with a camera? Does anyone know if this is confirmed and if there's a release date for it?
Thanks!

Julian Wright wrote:
If it's not on the Apple web-site, then it hasn't been announced, confirmed, released or anything:
http://www.apple.com/ipodtouch/
Anything you read elsewhere is just a rumour until Apple says anything.
and let's be honest, apple rarely say anything until just before it actually happens.

Release date for MSI GT70 with GTX680M?

Does anyone know when the release date for the GT70 with GTX680M will be for Europe (the netherlands).
Really looking forward to it, but I still can't seem to find a reseller.
greetings.

You can check with MSI here. http://us.msi.com/service/PreSaleForm/

Not showing up for 2 weeks then with original release date

I bought all of these today. Searched for all of them last Monday and did not find. Yet they claim to have old release dates. Last week I found on Christmas song actually there for the first time.
These are listed with the following release dates but none of them were there last week...
Warm Fuzzy Missing 06/01/2010
Andy Gibbard Colliding - Single 04/01/2010
Franco Nature's Warning 04/01/2010
Ratz The Ratz Smell 04/01/2010
Planet Love Sound Thirsty 04/01/2010
Theemu A Brand New Start 03/01/2010
Perfect Static Don't Go 03/01/2010
Six Volt Girl Next Door 03/01/2010
One Hit Tragedy Let Love Breathe 02/01/2010
Glass Pear Where Is My Home? - Single 02/01/2010
Mary Elise Moon and Stars - Single 31/12/2009
Tom McFadden & The Nervous System My Country Is Better Than Your Country - EP 31/12/2009
Dark Scarlett Three Tracks - EP 31/12/2009

I also don't know why these forums don't have an "iTunes store" section.
You mean like this? -> Using iTunes Store with Windows
or this ? -> Using iTunes Store with iTunes for Mac
It is the same regardless of what operating system you run your client on.
The actual store is the same though iTunes is slightly different, such as some of the options and key presses.
If someone were having problems, the first question I would ask is what computer and OS is being used.
If a question is posted in the *Using iTunes Store with Windows forum*, I won't need to ask.

Re-Packaged 9IASR2 for Linux with Patches release date?

Anyone have a date when Oracle are going to re-release the linux distribution for 9iasR2 with all the patches.
It took me 3-4 weeks to get everything working on Linux. I also installed the Win2K version which was very smooth. I plan to re-install on Linux but onto two boxes, one for the infrastructure server and one for the
app server because of the memory and processing requirements. I don't want to go through the pain of that linux installation again!!!!. I have several projects on hold for this, so a timescale would be very useful.

Wait until it becomes available on OTN, and then place the order.
HTH,
Ashesh Parekh
Oracle9iAS Product Management Hi Ashesh,
Have we got any update on the release date. My project deadline is at the end of the month. If the linux repackaged version is going to be later than that I will have to install on Mircosoft Win2k!
Regards
Orlando

Help with Release Date issue

I'm trying to organize my albums by release date, however the "release date" field is not editable, nor is there a release date field within the "Get Info" window (just a "Year" field). How can I go about sorting by album release date?

If you have albums that were released on the same day, such that you have identical Sort Album fields for different Album fields, this will lead to unpredictable behavior when sorting on iPods and in the Browser — the albums may get mixed together. You can avoid this by appending a letter or other meaningless code to the end of the date to distinguish them.

OC4J with MySQL please Help

i wanna test my work with Ejb 3.0 and i want connect with MySQL
i tested connection with MySQL database from JDeveloper
and it successed and i created CMP from MySQL tables
But the problem when im trying to deploy it with OC4J
it throws an exception SQLException ( Invalid Oracle URL )
if anybody know anything about this problem
please help me

thankx for help
but it didnt work i dont know why
i tried many way to deploy it but it stell throws exception
<< Invalid Oracle URL specifiedError Code: 17067
>>
this is OC4J data-sources.xml file
<?xml version="1.0" ?>
<data-sources xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="http://xmlns.oracle.com/oracleas/schema/data-sources-10_1.xsd" schema-major-version="10" schema-minor-version="1">
<managed-data-source user="root" password="pagera" connection-pool-name="Example Connection Pool" jndi-name="jdbc/MySQLDS" name="MySQLDS" />
<connection-pool name="Example Connection Pool">
<connection-factory factory-class="oracle.jdbc.pool.OracleDataSource" user="root" password="pagera" url="jdbc:mysql://localhost/test" />
</connection-pool>
</data-sources>
and i tried it
<data-source class="com.mysql.jdbc.jdbc2.optional.MysqlDataSource"
name="mysqlDS" location="jdbc/mysqlCoreDS" xa-location="jdbc/xa/mysqlXADS"
ejb-location="jdbc/mysqlDS" connection-driver="com.mysql.jdbc.Driver"
username="root"
password="pagera"
url="jdbc:mysql://localhost/test"
inactivity-timeout="30" />
but it didnt work too
i dont know what to do.....
if anyone has another way pls tell me

Release date for 10.1.3 now Fall 2005?

The Eclipse EJB 3.0 Tools FAQ from 12 April includes...
Q: When will you have EJB 3.0 capability available in Oracle products?
A: The Oracle Application Server EJB 3.0 preview is available now for free at oracle.com/technology/ejb3. Oracle Application Server 10.1.3 and Oracle JDeveloper 10.1.3 will ship with EJB 3.0 functionality in the fall of 2005.
Could someone from Oracle clarify whether this means that 10.1.3 will not now appear (with or without EJB 3.0 support) before Fall/Autumn 2005? I seem to remember that a few months ago, the release was planned for April 2005, so at this rate it may never appear.
If anyone could provide a more specific release date it would be appreciated, since Fall 2005 could mean waiting until mid-December.
I can't find a release date for 10.1.3 on the JDeveloper pages on OTN - perhaps this could be addressed to avoid this question continually appearing on this forum?
Thanks in advance.
Mike.

Shay,
Thanks for the information. I appreciate your commitment to getting the product right before releasing it. You'll be aware, I'm sure, that there are a lot of people looking to use 10.1.3, so to allow us all to plan our work effectively it would be appreciated if any further changes to the release date could be communicated to us, ideally via this forum and/or the JDeveloper pages on OTN.
Thanks again,
Mike.

Refresh the object associated with a Row in a Data Control?

I am using EclipseLink & have an issue with multiple updates of the same Row. During an update, a new instance of the entity is returned by the update method. The instance bound to the Row is not updated with this new version and subsequent updates fail with an optimistic locking exception since the entityVersion hasn't been updated.
Question: Is it possible to refresh the instance associated with a data control Row? I can remove rows, create rows, but it is not apparent to me how to update a row. I am trying to avoid doing a full retrieve on the bound iterator.

Hi!
The issue here is, by my opinion, a gap between ADFm and EJB 3.0 in use-cases with large data sets. If you search this forum, you may find related thread by Pedja about problem of feasible "scrollable" af:table with large number of entities in EJB finder result list. Unfortunately, the ADFm "paged" fetching is in mismatch with EJB support for "paged" (or scrollable) results lists. The all results of EJB finder method are retrieved from data source, stored in memory (thus breaking the heap) and transferred to ADF datacontrol. Then, and only then, ADFm paged fetching and caching mechanisms are employed – but they are just cosmetics as the main data set is permanently stored in memory as List<?>. The workaround is, as Pedja discovered, to write completely proprietary TableCollectionModel which completely evades ADFm and is implemented by set of EJB Session methods for paged acces to datasource through TopLink and native database queries (enabling retrieval of particular range of rows instead a complete result set). Of course, this is very complex coding experience and I find it a not acceptable for efficient development of modern applications on ADF + EJB stack, especially as it brakes a technology independence promoted by EJB and EclipseLink and other standards-based technologies (as you have to use database-specific native query implementation for paged /scrollable access!).
What I want to say is that I have feeling that ADF support for EJB is not complete in full extend and that ADFm is still much better suited for BCs then for EJBs. I hope that this will be solved in future as this issue may pose a significant issue on application development in enterprise-level area where it is supposed that we are dealing with BROWSING also a large data sets.
Yes, I emphasize a BROWSING as I strongly oppose a dogmatic approach that SEARCHING is a solution for every use-case. From theory of information, the system SHOULD NOT limit the user in accessing ALL information (based on access rights, of course). So the idea that SEARCH forms should be used to bridge a architectural gap between a ADFm and EJB is not acceptable, as the search MAY limit the user in acquiring the information he (or she) is not able to describe in adequate manner based on search criteria offered by the developer. So, the developer may be responsible for misinformation of user, by limiting his access to information, jus for technology limitations of ADFm which forces a development of purely SEARCH-based functionalities.
I hope that development team would appreciate and consider this remarks, and invest effort in closing (not bridging!) the gap between ADFm and EJB.
Regards,
PaKo

Sharepoint list dataheet view error "Cannot connect to the server at this time. You can continue working with this list, but some data may not be available"

I have a List which is having around 14000 items in it.while opening that list in datasheet view it is giving error .
Below is a summary of the issue:
After selecting datasheet view beow error occurs:
    "Cannot connect to the server at this time. You can continue working with this list, but some data may not be available."
    "Unable to retrieve all data."
    The item counts displays say 100 out of 14000 items.
Exporting List to excel is giving only 2000 records out of 14000 records.
Other Observations   -
This is happening to only one list on the site .There are other lists in the site whose no. of records is equal to 8000 to 9000.They are working absolutely fine without any error.
Also, If I am saving this list as a template and creating another list with it ,then it is working absolutely fine with 14000 records,so the issue does not seem to be related with no. of records as the template list is working fine.
I have checked the Alternate access mapping setting ,its fine.
It should not be related to lookup,datefield or any other column as the list created from it template is working fine with all these columns.
I checked below links also ,but doesn't seem to work in my case.
http://social.technet.microsoft.com/forums/en-US/sharepointadminprevious/thread/974b9168-f548-409b-a7f9-a79b9fdd4c50/
http://social.technet.microsoft.com/Forums/en-US/smallbusinessserver/thread/87077dd8-a329-48e8-b42d-d0a8bf87b082
http://social.msdn.microsoft.com/Forums/en-US/sharepointgeneral/thread/dc757598-f670-4229-9f8a-07656346b9b0

I have spent two days to resolve this issue. Microsoft has released two KBs with reference to this issue...but are not appearing in search results at the top.
I am sharing my finding.
1. First install the
KB2552989 (Hopefully you might have already installed it. The KB detetcts it and informs the user.)
2. Then update registry by adding new key for data fetch timeout as mentioned inKB2553007
These two steps resolved the issue in our environment. Hope it might help others as well.
Pradip T. ------------- MCTS(SharePoint 2010/Web)|MCPD(Web Development) https://www.mcpvirtualbusinesscard.com/VBCServer/paddytakate/profile

MSI Big Bang XPower II X79 release date

Whats the release date for this motherboard to the UNITED STATES?
MSI Big Bang XPower II X79 LGA 2011

We don't know, we have nothing to do with MSI marketing. We are MSI product users the same as you helping each other with problems and have nothing to do directly with MSI. You would need to ask MSI. Question like that my typical answer is that you will know the release date after you see it for sale in the stores.
>> How to contact MSI <<
http://us.msi.com/service/PreSaleForm/
As a matter of fact if we knew the release dates of products like that we would post it in the forum to avoid those kind of questions all of the time.

Why is it that when looking through new apps in the apps store on my ipad in release date mode does it return to the first 1-12 after viewing pparticular apps?

why is it that when I look through the new apps in the apps store in release date mode it returns to the first page after veiwing more information about some apps, I could be ten to twenty pages in and have it happen.
Also, I only speak and read English and although there are probably great apps for people from other nations, I don't want to wade through all the apps that I can't make use of. I expect that people of other nationalities or languages don't want to have to wade through every app that they can't make use of, is there not a way that alI users could filter by language?
I mean no offence to anyone but with a collection of hundreds of thousands of apps in all languages and the jump back to the begining after possibly being into the list by a number of pages I stop looking after awhile and I'm sure I've missed some excellent apps by doing so.

Contact iTunes support : http://www.apple.com/support/itunes/contact/

OC4J with EJB 2.1 release date?

Similar Messages

Maybe you are looking for