Oc4j won't run (or hangs)

I have recently downloaded jdev 10.1.2.0.0 on WinXP; I created a simple hello.jsp - when I try running it using the embedded oc4j, I get the status message in the browser saying "Web site found. Wating for reply..." and that's it -nothing else. I noticed that the process javaw is consuming 99% of the CPU so I kill it either thru Task Manager or jdev's Run --> Terminate.
Any suggestions warmly appreciated as I've tried everything I can think of - all to no avail.

I appeared to have "solved" my problem. The oc4j problem arose when I created a simple helljsf project as described in an Oracle-written paper, "How to Use JSF with JDeveloper 10g". I edited the web.xml file as instructed in the paper and created another xml file, faces-config.xml. When I ran the hellojsf.jsp is when the embedded oc4j thrashed and the web page "hung". I then tried backtracking by creating a simple hello.jsp and it caused the same behavior (but I created the hello.jsp file in the same project as the hellojsp.jsp. I thought about this and decided I should have created the hello.jsp in a different project than the hellojsp.jsp and when I did that and ran the hello.jsp the embedded oc4j no longer thrashed and returned the "hello" text on the web page.
I surmize there's something wrong in the web.xml or faces-config.xml; but not knowing JSF yet, I can't say what, if anything, is wrong in those xml files. Or maybe there's bad code in the JSF libraries the same article instructed me to incorporate into Jdev.

Similar Messages

  • CS3 installs but won't run

    Ok - not sure if this goes in this section or not.. but it's a technical question.
    My b/f bought me a Dell Laptop last week. It has the recommended minimum of everything adobe says it needs for photoshop CS3 (see below for 1721 specs)
    When I installed it on the laptop - it was slow, but said it installed. But when I go to open up Photoshop, it opens the screen - and then just hangs. After about 5 minutes it says not responding and I close it. Any of the other programs that came with won't even get that far. I click on them and it gives the little "thinking" circle (as I call it.. lol) and then nothing.
    I have read that CS3 has issues with Vista - but their site says the home premium should work. I've also read about 64 bit issues.. but the OS is 32 bit - so it's capable of running 32bit systems... I guess.
    I called adobe yesterday after installing and reinstalling CS3 15+ times... with the same issue. I was on the phone for about 2 hours with them. Basically - they have NO CLUE what it would be since it installs fine and opens with no error messages. I checked the log files and there is nothing in there I see that says any kind of error.
    I have disable windows defender, uninstalled McAfee and google desktop (all are known to cause issues with CS3), I have ALL non MS startup services turned off.. I have turned off the MS users control.. all suggested by the adobe tech.
    I have installed using the run as administrator. Nothing. Created a new admin account and installed on that user and opened on reg admin account. Nothing. (again typical things that correct cs3 install issues)
    The last thing the guy said was that it might be a video issue. I checked and there aren't any issues mentioned and no driver updates listed.
    We tryed installing this on my b/f's laptop. He bought the exact one I have (except his is red.. mine blue.. lol) and it does the EXACT same thing...
    So today we called dell. they say it's a software issue and won't answer any questions for free. Apparently only hardware support is free... But they won't accept this is a hardware conflict with the software..
    errrrr
    Anybody have any clues on this?
    =======================================
    LAPTOP SPECS:
    Inspiron 1721 Notebook: AMD Turion 64 X2 Mobile Technology TL-56 (1MB/1.8GHz) Genuine Windows Vista Home Premium
    Operating System
    Genuine Windows Vista Home Premium
    Memory
    2 GB DDR2 SDRAM 677MHz (2 DIMMs)
    Hard Disk Drive
    120 GB SATA Hard Drive (5400 RPM)
    Video
    ATI RADEON Xpress1270 HyperMemory
    Media Bay
    8X DVD +/- RW w/dbl layer write capability
    Base
    Inspiron 1721 Notebook: AMD Turion 64 X2 Mobile Technology TL-56 (1MB/1.8GHz)
    Bluetooth Wireless
    Bluetooth Wireless Card 355
    Software Upgrade
    Microsoft Works 8.5
    Premium Pack - Advanced Photo+Music: Deluxe Pack + Paint Shop Pro XI
    NoteBook Screen
    17 inch WXGA+ TrueLife Glossy Notebook Screen
    Hardware Upgrade
    No Camera
    6 Cell Primary Battery
    90W AC Adapter
    Network Interface Card
    Dell 1505 Wireless-N

    Rob - thanks for taking a stab at this.
    I have tried installing from the DVD and also from the zip file. the zip file was extracted to the hard drive brfore I ran it - and I ran it as administrator.
    And when it stalls - it gives the (NOT RESPONDING) tag on the window - which usually means that even if I leave it (and I have for up to 20 minutes) - still nothing.
    Here's the update from my dealings with DEll today...
    Dell tech support guy told me that it was a know issue that CS3 WON'T run on Vista and that Adobe is working the issue
    Told them that I knew others that were running it on Vista and it worked fine. They had no answer.
    Then I waited for the Technical support manger to call. This is after expressing my displeasure to the technical supervisor about them trying to pawn this issue off on anyone else but themselves. Why can't they go grab a 1721 off the shelf and replicate the issue and try to figure it out from there?!?!?!
    I used to work on a network helpdesk.. if I tried to pull that crap answer without trying to replicate the issue and AT LEAST try to find an answer.. I wouldn't have lasted very long at all!!!!
    The Tech manager told me to call customer support and ask for an OS swap (from vista to XP) because they don't know what the problem is and so it muct be a Vista compatibility issue
    I call customer support. They say that they no longer will give out XP since it is a step backwards. And to install XP on the machine ourselves (even a liscensed copy) would void the warranty. They suggest I talk to sales about swapping the laptop out with a "more compatible" one. Which isn't a totally bad idea since I really do think it is an AMD/ATI conflict.
    They transfer me to Sales.. ohh - you used the Employee Purchase program.. you need to talk to them.. and they transfer me.
    The EPP people tell me.. ohhhh you didn't actually go through us since you bought it off the Dell Outlet store. So they transfer me.
    The dell outlet store says they will be more than happy to swap me out to an Intel based machine.
    Only catch is the Intels are more expensive. They don't have any for the price we paid for the amd's. Fot about $40 more I can get one with a slower processer, a gig less ram, no dvd writer, but with a 160gb hd. To get compatible to mine - would be about $150 more.
    And they only have silver in the low end, and black or brown in the higher. Not that I really give a s@!t what the color is.. but it brings up the main reason I am sooo pissed abput all of this....
    Why should I have to pay more money, settle on doing without option/features want/need.. just because THEY don't want to take the time to figure out what the real issue is?!?!?! Why isn't it them doing these calls and doing all this troubleshooting.. Why am I being peanilzed for THEM not wanting to do their jobs....
    Told the B/F that I am done with Dell. That I don't want the laptop anymore and I don't want any other one from them. He says he'll pay the extra and get me the other one.. but that isn't the point....
    Not sure what my next move is.

  • EJB 3.0 App won't run on OAS 10.1.3.1 AIX5L

    Hi All,
    I'm developing Application with Struts + JSP + EJB3.0 with JDev 10.1.3. It runs well on embedded OC4J with JDev. And it runs well also on Oracle Application Server 10.1.3.1 + Windows XP Prof. But when I deployed it on Oracle Application Server 10.1.3.1 + IBM AIX 5L which is my production environment, the application won't run.
    I try to narrowing down the problem, so I create a simple EJB3.0 Application. It consist of 1 Entity from Table (JPA/EJB3.0) and the entity has queryFindAll() method. One simple Facade Session Bean EJB invoke it. 1 JSP file call a class that do the context lookup to SessionBean EJB.
    This simple application runs well on both platform, i.e Windows XP Prof and IBM AIX 5L.
    But when I try to create an application that has complex relationship, i.e has relation many-to-many and one-to-many, the application wont run on OAS 10.1.3.1 on IBM AIX5L. Instead, it runs well on OAS 10.1.3.1 on Windows XP Prof.
    this is the error messages in log.xml from OAS 10.1.3.1 on IBM AIX5L:
    [SessionEJB:public java.util.List tintin.model.SessionEJBBean.queryBiOfficesFindAll()] exception occurred during method invocation: oracle.oc4j.rmi.OracleRemoteException:
    javax.persistence.PersistenceException: Exception [TOPLINK-7158] (Oracle TopLink Essentials - 2006.8 (Build 060829)): oracle.toplink.essentials.exceptions.ValidationException
    Exception Description: Error encountered when building the @NamedQuery [BiOffices.findAll] from entity class [class oracle.toplink.essentials.internal.ejb.cmp3.metadata.queries.MetadataNamedQuery].
    Internal Exception: java.lang.IllegalStateException: ClassLoader "ejbtest.root:0.0.1" (from <application> in /oraias/product/10131/gebas/j2ee/oc4j_geb/applications/ejbtest/):
    This loader has been closed and should not be in use.; nested exception is:
    javax.persistence.PersistenceException: Exception [TOPLINK-7158] (Oracle TopLink Essentials - 2006.8 (Build 060829)): oracle.toplink.essentials.exceptions.ValidationException
    Exception Description: Error encountered when building the @NamedQuery [BiOffices.findAll] from entity class [class oracle.toplink.essentials.internal.ejb.cmp3.metadata.queries.MetadataNamedQuery].
    Internal Exception: java.lang.IllegalStateException: ClassLoader "ejbtest.root:0.0.1" (from <application> in /oraias/product/10131/gebas/j2ee/oc4j_geb/applications/ejbtest/):
    This loader has been closed and should not be in use.
    What could be the root cause of these errors? I've tried to compared all components that are installed on WinXP box and AIX5L. I can't find any clue of it.
    Could someone please help me? Thanks...

    I found Error Code for TOPLINK here: http://www.oracle.com/technology/products/ias/toplink/doc/10131/main/_html/errcode007.htm
    but it is strange, that my error exception is TOPLINK-7158:
    7158: ERROR_PROCESSING_NAMED_QUERY_ANNOTATION
    Cause: Error encountered when building the @NamedQuery annotation from entity class ClassName.
    Action: Ensure the correctness of the annotation specification.
    how come that error only occured in OAS 10.1.3.1 on AIX 5L, but it didn't occur in OAS 10.1.3.1 on Windows XP Pro?
    Is it really the root cause or OAS throws wrong exception code? Could someone from Oracle help me please?

  • 11.7.700.169 exe won't run

    I'm trying to install 11.7.700.169 on 64-bit Windows 7. I've tried via Chrome, IE and Firefox. Each time I download and open the exe file, but when I click "run" nothing happens. I know in Chrome there is that Technote about it already being part of the browser and that it just needs to be enabled.... when I go to enable the plug in, it says I need to download a critical security update. When I follow the link to download, I have the same problem where the file won't run. It's not that I'm not waiting long enough because I've waited a long time to see if it will start to run and it just doesn't! Any thoughts?

    Download the offline installers for IE and Firefox from http://helpx.adobe.com/flash-player/kb/installation-problems-flash-player-windows.html#mai n-pars_header (under the heading Progress bar hangs...).
    I don't know about Chrome, as I don't use that browser.

  • Illustrator won't run, instead AAM tries to run

    Hi all,
    When I try to run an application form CS6, e.g. Illustrator or InDesign, they won't. Instead the Adobe Application Manager tries to run, but hangs/freezes. I need to force-quit AAM, but then again, none of the CS apps won't run/start, and AAM tries to run again, and freezes and so on and so on.
    How can I get my apps to run again (and get rid of AAM trying to run).

    Solved it !!!
    Restarted my iMac, and then reinstalled AAM.
    Everything is working again.
    (But still don't know why it went wrong in the first place, though)

  • Mail won't run - can I rebuild without running Mail?

    I was installing the latest update to Mail Tags in Mail and it crashed in the process of the update. Now mail won't run - it just hangs. I reinstalled Mail and it's still doing the same thing so it must be the mail data file (right?). Can I rebuild the data file without running mail? What to do?

    Ok, I should have tried the easy solutions first. I deleted the preferences com.apple.mail.plist in my user's Library folder and that solved the problem. Of course your Library folder is hidden in Lion so you must reveal the folder first which can be done like this: hit command+shift+G from the finder and type ~/library/ You will ge temporary access to the Library folder.
    Problem solved for me.

  • Firefox 24 and 25 won't run on server identities?

    I downloaded the last update, 24, which worked fine on local identities. When I try to open it in a server/network identity, it never opens, just hangs - I tried opening in safe mode (opt key + open, choose safe mode) and it acts like it will open, but never loads, and I can't click any buttons on the toolbar (or I can click one, but nothing ever loads). Resetting doesn't work either. It does the same thing on all computers, only server identities.
    I've tried creating a new profile, deleting old profiles, changing places suffixes to ".old", deleting prefs file - nothing worked. Firefox never opens, so I can't do any of the support related to the toolbar.
    I think it's related to an add-on, because it first crashed when trying to find compatibility with add-ons. It won't run in safe mode, though, so I can't tell.
    My next step is going to be trying to find where all the add-ons are located, and delete them manually, but I'm not sure where to start.
    If anyone has any other advice, that would be great!

    Hi,
    Thanks, but it didn't work~~
    I tried to delete the extensions from the folder first, but when I tried to open firefox, it had the same problem.
    I actually removed both the Mozilla folder and the Firefox folder as a last resort, and it's still not working.
    The window pops up, with the "bookmarks and history system will not be functional... Some security software can cause this problem" error message. The "Learn More" button is not clickable.
    I've disabled all security software and even my firewall, and it's still happening. My extensions/addons are deleted.

  • Spore won't run

    I just purchased a MacBook, it is my first Mac. Anyway, I've loaded Spore and downloaded all of the updates but it won't run on my computer. When I start the program the Spore splash page is displayed and it just hangs there. I can't end the program, it's unresponsive. Performing a force quit is the only way that I have found to exit.
    I am very new in the Mac environment, I'm sure there is a simple solution here but I'm lost. How can I get Spore to run?
    Thx

    RogueBalog , welcome to Apple Discussions.
    You posted in the Older Apple Hardware forum, which is for G3 Macs& older. You should post in the G5 forum at http://discussions.apple.com/forum.jspa?forumID=596
    Here's the spec sheet on your G5. http://www.everymac.com/systems/apple/powermacg5/stats/powermac_g5_2.0_dp2.html You have a newer Mac than most of the discussion members. The first upgrade would be to increase RAM. The max RAM is 8GB. You should be able to run most current software.
     Cheers, Tom

  • JRE won't run on win2k

    I have a couple of machines that are running win2k (service pack 3) that won't run any Swing applications. I have tried JRE versions 1.4.0, 1.4.1 and 1.3.1. All of them hang with a simple application that displays a JFrame only.
    Has anyone ever had this problem? What did you do to solve it?

    Thank you for your reply
    The machine configuration is as follows:
    This is a Premio Box (I've never heard of it)
    -Intel Xeon/2.4ghz/512k Cache Socket 603 CPU
    -512mb ecc ram
    -80gb HD
    -ATI Radion 7000 TV Out VGA Card
    -Windows 2000 service pack 3

  • Audigy 2 ZS Diagnostics Won't Run After Driver Upd

    Diagnostics worked fine until I updated mu Audigy 2 ZS drivers to the latest version; 02.08.0004. I'm running XP Pro SP2. Followed the Creative update instructions to the letter. Downloaded the update package to my machine. Nothing else was running when I executed the update package. Even disabled network and then my AV. Now Diagnostics gets as far as the hardware Wave test then just literally disappears. No error messages, no application or process hangs showing in task manager and no errors showing up in XP event viewer.
    Tech Support says this shouldn't indicate that anything else is effected as long as the sound works, which it does. They couldn't explain why it won't run.
    My question: is there some way to safely delete this program? Since it doesn't work anymore it's useless and just taking up space.
    Thanks in advance for any help provided.

    I had the same problem but here is the solution (at least it worked for me)
    Click on Windows Start button. Select Run. Type in Regedit and click OK to run it. Navigate to to the node "HKEY_LOCAL_MACHINE\<EM>Software\Creative Tech\Software Installed</EM>" and delete the node. Then navigate to the node "HKEY_LOCAL_MACHINE\<EM>SOFTWARE\Microsoft\Windows\CurrentVersion\Unin stall\5CDDF96A-BC34-4D72-9ABA-EFFF0C39977</EM>" and delete the node.

  • Automator app won't run from double-click

    automator app won't run from double-click in finder or from alert from ical. Will only run if I open in automator editor.
    I found a solution on my own. I opened activity monitor and all the automator apps that I run daily were hanging up and the auromator launch was hanging up. I force quit them from the activity monitor. Now it works again.

    I might have gotten there eventually on my own, but I suspect finding your post saved me a lot of work. Thanks for posting your solution.

  • How do I install the FM10 licensing fix when Adobe Update Installer won't run?

    Adobe Update Installer won't run so can't install FM10 licensing fix
    This question is Not Answered.(Mark as assumed answered)
    Aug 9, 2013 12:09 PM
           Tags (edit): none (add)  
    Because FM10 began crashing with "fatal" errors whenever I tried to generate a TOC for a small (65 page) book, I researched workarounds and none of them worked. Now that I have delivered a crippled deliverable via Acrobat manipulations, I would like to fix FM. I uninstalled it and reinstalled it, got some updates, and then received the "licensing fix" error that popped up in January. I'm wondering why this fix was included not in the updates. That said, the licensing fix package, first, would not unzip so I downloaded it again. I unzipped it but I got a message that Adobe Updater Installer could not run and after several clicks I found that file. I reinstalled Adoble Update Installer but it still does not run.
    I am running Windows XP and have TCS 3.5.I uninstalled FM and RH but not Acrobat, Captivate, or Photoshop.
    So, now what? Listen to my supervisor who says never use FM again?
    P.S. Why do I have to enter a title for my question and then do it again when this page opens??

    Give Adobe Support a call or contact the TCS team at [email protected] - something in your environment is causing the installer to fail (I'd guess).

  • Action steps that won't run correctly in PSE 7/8/9 (but did in 4 and 6)

    I have a wonderful action that was written to work in PSE 3/4/6.  It won't run in PSE 7/8/9.  After fooling around for a while, I think I understand why.  Adobe changed the way Adjustment Layers are handled.  In earlier versions of Photoshop and Elements, Adjustment Layers threw up a modal dialog box.  That changed so that Adjustment Layers now appear in the Palette Bin as a palette.
    Here a sample of some of the action steps that won't work correctly:
    Make adjustment layer
    Using: adjustment layer
    Type: levels
    Set Selection
    To: none
    Set current layer
    To: layer
    Name:  “Adjustment 1”
    Set current layer
    To: layer
    Mode: luminosity
    Stop
    Message:  “Move gray slider left”
    With Continue
    Set current adjustment layer
    To: levels
    In earlier versions of PS and PSE, the way these steps would work is that a new adjustment layer would be created, the dialog box giving the instruction would open, it would be dismissed by clicking "Continue," and then the "Set current adjustment layer to: Levels" would generate a model adjustment layer dialog box would open up which would let one make the adjustment.
    In newer versions, since Adjustment Layers are handled in the Palette Bin, after dismissing the instructions, the action doesn't stop to allow the user to make change the sliders on the adjustment layer.
    The action runs perfectly in CS4 and CS5 and throws up the levels adjustment modal box as it did in PSE 4 and PSE 6, but the action doesn't throw the modal box in PSE 7/8/9
    Does anyone know of a way to alter the action steps to allow the action to stop to allow the adjustment and then to resume again?

    Adding a new levels adjustment layer on top of the Midtone contrast layer
    should work, just use a clipping mask to restrict the adjustments to the
    areas of the levels adjustment layer below. The histogram will be different, but
    actually testing the action is really the only way to know if that makes any difference.
    Replacing the levels adjustment layer is another option, though it requires a few more steps.
    The following assumes when the action gets to this point,
    the Midtone contrast adjustment layer is the active (selected) layer.
    To record this part of the action:
    1. Duplicate current channel (in the channels panel. drag the Midtone contrast mask
        down to the Create new channel icon at the bottom of the channels panel)
    2. Ctrl+click on the newly created channel (Midtone contrast mask copy)
        This loads the selection of that channel.
    3. Drag the new channel (midtone contrast mask copy) to the trash icon at the bottom
       of the channels panel.
    4. Back in the layers panel, delete the Midtone Contrast adjustment layer.
    5. Go to Layer>New Adjustment Layer>Levels
        This creates a new levels adjustment layer using the selection loaded from
        the duplicated channel and opens the levels dialog.
    To load the RGB (composite) as a selection, Ctrl+click on the rgb in the channels panel
    and the same is true for the red, green and blue channels.
    With layer masks, elements doesn't seem to want to load them as selections in actions,
    so that's the reason for the action steps above.
    MTSTUNER

  • CS2 won't run

    CS2 won't run, says activation code no longer usable. Been running win7 on this system 3 years. Adobe says it won't activate in win7. Well, it did, and ran just fine. what's up?

    I assume when you say "Adobe says it won't activate in win7" that you talked to customer support....
    A drive change could trigger the need for reactivation.  Did you tell them that you're running from a mirrored drive?
    It sounds to me that they're being aggressive about trying to get you to upgrade when they should still be supporting you with active maintenance of their activation database.
    But unfortunately if you can't get them to adjust their database you're out of luck.
    -Noel

  • I have a Windows 2003 Server 64-Bit, and when I upgraded to Firefox 4.0.1 now it won't run, it keeps saying to restart to complete the installation, but I've restarted theserver 4 times, and I still can't use it.

    I have a Windows 2003 Server 64-Bit, and when I upgraded to Firefox 4.0.1 now it won't run, it keeps saying to restart the computer to complete the installation, but I've restarted theserver 4 times, and I still can't use it.

    I ended up putting it in DFU mode.  It's kinda hard to tell it was in DFU mode because nothing showed on the screen, it was just black, but the sounds from the computer helped to tell me it was connected.
    Itunes still didn't recognize the device for whatever reason.
    So I used redsn0w.  I don't know if I can say that on these forums, but considering itunes was worthless at this point I am going to give credit where credit is due.
    Now I am giving itunes a second chance to upgrade to 5.1, if it doesn't work, well, back to redsnow and maybe I will even jailbreak it this time rather than just using the fecovery fix found under extras.

Maybe you are looking for