Oca questions and dumps questions

Hi
OCA questions and dumps questions
Thanks

It is against the policies of Oracle Certification to provide brain dumps to Oracle exams.
If on the other hand, you want test prep advice, you can find the details on Oracle Education main site under certifications.

Similar Messages

  • ILife 08 to 09 iWeb question (and a question about DW while I'm here)

    I was thinking of upgrading to iLife 09 for just a couple of reasons:
    (1) The iPhoto face recognition feature looks cool and I want to try it. I have tens of thousands of photos of friends from nearly 30 years in my iPhoto and it might be fun.
    (2) I basically like iWeb 08, but hate the way it deals with multiple sites. I always have to publish everything, but in iWeb 09 it looks like I can single out just a single site for publishing, even via FTP. is that right?
    Recently I also acquired Dreamweaver because of some work I'm doing for a company. But I find I can't even do basic simple things, like drag around text or insert a web widget (some HTML in a box) to move around and position - like I can do in iWeb.
    Are things like that possible in Dreamweaver?
    I can't even figure out how to add new text somewhere on a blank page in Dreamweaver. And everything I create looks boxy, plain and clunky. I am obviously not a web designer - I am a web application programmer.
    With Dreamweaver I feel like I stepped into some 20th century web authoring tool. With iWeb everything I create looks nice even though I have no artistic talent myself.
    doug

    I don't mind publishing to a folder and uploading using my FTP client, but it seems I have to publish ALL the sites each time to the folder and then just upload the one site's folder I was editing. So it takes a long time each time I publish to the folder. There is no way around that, is there?
    About my DW question, it was "in comparison to iWeb". If I asked in a Dreamweaver forum if DW could do this thing that iWeb could do, somebody would probably say, "Why don;t you ask your question on an iWeb forum?"
    Thanks,
    doug@hoping this discussion doesn't digress into whether I should post my question here or not

  • 1 more newb question and 1 question just to ask it

    Hello again everyone, i just have a couple more questions, i know Safari is a web browser but am i correct in assuming it is a high-speed/broadband-like web-browser? I am currently using AOL high-speed broadband on my PC but i dont plan on using aol when i switch to mac, so will safari just take my current high-speed connection and use it just as fast as Aol was?
    also, in debating between the $2,000 macbook pro and the $2,500, the only unupgradeable difference i can see it the video card being a Radeon X1600 128 or a Radeon X1600 256, now i plan on playing games on it, but it there that big of a difference between the 128 and the 256?
    THANKS IN ADVANCE ALL
    Sony   Windows XP  

    Hi, TheMacNewb.
    You wrote: "also, in debating between the $2,000 macbook pro and the $2,500, the only unupgradeable difference i can see it the video card being a Radeon X1600 128 or a Radeon X1600 256, now i plan on playing games on it, but it there that big of a difference between the 128 and the 256"If you are a "gamer" — especially if you play 3D games —   then you want the MacBook Pro. See this May 2006 review of the MacBook in Macworld.
    If you purchase a MacBook Pro, I'd opt for the fastest/largest VRAM graphics card available, i.e. the "ATI Mobility Radeon X1600 with 256MB GDDR3 memory."
    Good luck!
    Dr. Smoke
    Author: Troubleshooting Mac® OS X

  • Multiclip multi questions (audio question and syncing question)

    I have two questions concerning multiclip editing:
    1. How do you select the audio from one angle to remain the audio throughout as opposed to the audio track changing every time you select a different video source?
    2. If one camera in a three camera set-up stops recording for a technical issue and then goes back up, is there a way to sync both of those files to one angle of a multiclip? If not, is there a way to make them separate angles and sync via input on three angles and on output for the fourth angle?
    Thanks in advance.

    1. In the Viewer's Playhead Sync Menu (upper center), select "Video"
    instead of "Video + Audio".
    2. Sorry, neither of your ideas will work. Multiclips work with actual media
    clips, so two clips will be two angles; and the sync method (in, out, timecode)
    is the same for all clips.
    I suggest you assemble the two files from the camera in a sequence (using
    identical settings as the clips), sync them up exactly (with a little space
    between them), and export them using the same settings to make a new clip,
    which you can then import and use for your multiclip.
    Have fun!
    Les

  • K7N2 Delta2 : mbprobe question and tweakui question

    two questions:
    1) I installed temp monitor drivers for mbprobe using the winbond drivers that go with the software. the only temp i am able to read or put out is the mobo temp, my question is if there was something i overlooked on the mobo drivers cd that came with it, or do i need a diff driver than the one i installed?
    2) TweakUI question, i dunno if this is releated to the mobo or not, but i just came from a rev 1.03 asus a7n8x-dlx mobo and this never worked correctly with it either, i've reinstalled windows on several occations and never had this work correctly, the problem that i'm having is that under the auto-logon check-box, it unchecks itself after every windows boot, is there a setting i need to change so that it stays checked? i dunno what i'm doing wrong, all the other settings in tweakui remain even after reboots, so i couldn't figure out i was doing wrong
    thanks in advance for any help you can give me

    Never used mbprobe.  Google speedfan.  Discussion here.
    Auto logon is not a mobo issue.  Try this instead of the auto logon in tweakui.

  • Answers to a question and another question

    Have just started using chat beta app for imessaging from my mac to iphones.
    a lot of people have had issues syncing properly between devices, which i had as well.
    by syncing i mean:
    at the moment on my iphone all messages from 'dave' are in a single conversation. if dave was to imessage me from his mac, his message would show in a different conversation because its come from his email address instead of his phone number. even if i add his email address to his contact it will still show in different conversation. which is very annoying because i want all my conversations with dave to be unified regardless of where they were sent from.
    some people have suggested that the answer is to change the caller ID for imessage from your phone no to your email address.
    my problem with this is that all your imessages from your iphone to other iphones will show up as your email address instead of your phone number on the recipients phone, which i don't want and im sure a lot of people wouldn't want.
    anyway in case people are looking for a solution (as i was for ages) i came across a possible one which seems to work:
    delete all existing conversations from that person on both your phone and reciepients phone. from then onwards all messages sent between those 2 people will show in same conversation rather then 2 different ones regardless of where they are sent from.
    i have tried this with wifes phone and after deleting existing conversation on both our phones, all messages i sent her regardless of wether from my iphone or mac all shows in same conversation.
    anyway thats my answer to a possible problem, i also have a question:
    what is the future of messages beta? its a excellent idea, however makes no sense at all if it doesn't sync PROPERLY across all your devices which at the moment it doesn't. surely apple can identify you purely from your apple id, so i can't see why they can't get imessages to sync fully, so all imesseges sent to me and those i send as well all show up on both my phone and on mac.

    Hi,
    Currently Mesages Beta is storing your Messages from any source in two places.
    By default it is saving iChat style transcripts in Your Home Folder/Documents/iChats (this is the default place for the ichats folder)
    It is also storing, at least iMessages, in Your Home Folder/Library/Messages in the form of a data base.
    It seems to be this data base that show you the "History" of the contact you is chatting with you.
    (This can only be accessed by using the Finder's Go Menu and holding the ALT key to be able to select the Library)
    It also seems unclear as to whether it is the Address Book details or something at the Apple Server end that links Phone Numbers with IDs that allows the linking and syncing of the two forms of ID.
    The fact that you have found that clearing all the History of all IDs conversations allows better syncing is interesting.
    As I see it several things need to be considered
    Not only iMessages from Phone Numbers and Apple IDs need to be resolved for syncing but also whether people want the iChat type Buddy list chats to also be collated in that process.
    If iMessages are kept separate from the older iChat style chats in terms of syncing chats on the Mac end there is still the issue of whether Jabber and AIM Chats should be "synced" or collated for the "History" view.
    As I have several Buddies with History at least on AIM chats going back to 2004 and later jabber Chats with some of those it would make for a very long scroll back.
    There would appear to be a syncing issue with iMessages regarding the Name or Phone number that needs to just work and not need all chats to be closed and cleared to then sync  (or if closed/deleted a way of getting one you want to keep back or stored for review)
    A way of deciding what and how much "History" is called back for a Buddy or contact.
    The fact that all Saved Chat for a Buddy will show up does mean you have a useful search tool for certain things.
    However I rarely use Saved Chats for much more than that after about 6 months.
    Spotlight would tend to find it anyway (in the current Storage place)
    If History/Archives of chat are going to be kept in the Library then Spotlight will not be able to Search them.
    Messages will be in Mountain Lion.
    And for that we will have to wait.
    9:23 PM      Thursday; May 17, 2012
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
      iMac 2.5Ghz 5i 2011 (Lion 10.7.4)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.7.4),
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

  • Flapping circuit question and loopback question...

    Two questions)
    1) If someone reset a pc or cable modem will that cause the circuit to flap (as shown below)?
    054396: Oct 21 19:51:24.288 PDT: %LINK-3-UPDOWN: Interface FastEthernet0/25, changed state to down
    054397: Oct 21 19:51:25.289 PDT: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/25, changed state to down
    054398: Oct 22 04:11:50.740 PDT: %LINK-3-UPDOWN: Interface FastEthernet0/25, changed state to up
    054399: Oct 22 04:11:51.776 PDT: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/25, changed state to up
    054400: Oct 22 04:12:29.280 PDT: %LINK-3-UPDOWN: Interface FastEthernet0/25, changed state to down
    054401: Oct 22 04:12:30.308 PDT: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/25, changed state to down
    2) Does this mean someone plugged a loopback adaptor into a switch port?
    020561: Oct 20 02:21:12.212 PDT: %LINK-3-UPDOWN: Interface FastEthernet0/12, changed state to up
    020562: Oct 20 02:21:14.004 PDT: %ETHCNTR-3-LOOP_BACK_DETECTED: Keepalive packet loop-back detected on FastEthernet0/12.
    020563: Oct 20 02:21:14.004 PDT: %PM-4-ERR_DISABLE: loopback error detected on Fa0/12, putting Fa0/12 in err-disable state
    020564: Oct 20 02:21:16.048 PDT: %LINK-3-UPDOWN: Interface FastEthernet0/12, changed state to down
    020565: Oct 20 02:21:43.196 PDT: %PM-4-ERR_RECOVER: Attempting to recover from loopback err-disable state on Fa0/12
    Thank you,

    Thanks for your reply....why would a fe connection go up/down just suddenly then never again (as of yet)....could it be a slightly loose cable that got bumped or due to vibrations?
    098422: Oct 24 00:50:15.227 PDT: %RTD-1-LINK_FLAP: FastEthernet0/1 link down/up 5 times per min
    098424: Oct 24 00:50:25.225 PDT: %RTD-1-LINK_FLAP: FastEthernet0/1 link down/up 5 times per min
    098425: Oct 24 00:50:30.303 PDT: %RTD-1-LINK_FLAP: FastEthernet0/1 link down/up 5 times per min
    098426: Oct 24 00:52:37.483 PDT: %LINK-3-UPDOWN: Interface FastEthernet0/1, changed state to up
    098427: Oct 24 00:52:37.821 PDT: %LINK-3-UPDOWN: Interface FastEthernet0/1, changed state to down
    098428: Oct 24 00:52:41.693 PDT: %LINK-3-UPDOWN: Interface FastEthernet0/1, changed state to up
    098429: Oct 24 00:52:42.535 PDT: %LINK-3-UPDOWN: Interface FastEthernet0/1, changed state to down
    098430: Oct 24 00:52:44.640 PDT: %LINK-3-UPDOWN: Interface FastEthernet0/1, changed state to up

  • 16:9 question and 24p question

    I shot some footage on a Canon xl2 in 16:9 and in 24p.
    Regarding the 16:9. I was wondering how to show 16:9 footage on a 4:3 TV with out it getting streched. Can this be fixed in post?
    Also regarding the 24p. the Canon XL2 records in 24p then it uses 2:3 pulldown to record to tape (in 60i)
    What is the best way to caputre this in Final Cut Pro HD?

    DVDSP implementation of 16:9 is clunky in that you have to set the 16:9 settings all over the place (menus, tracks, project, etc.) So be careful. The manual has a lot of information on this subject, to be sure. I'd set everything in DVDSP to letterbox, by the way, not panscan (which is just a crop unless you somehow have encoded pan-scan vector info into your build) unless you've specifcally protected for 4:3 in your widescreen shoot.
    Make sure you set your DVDSP simulator to 16:9 so that you can double check everything with some confidence before you burn.
    Don't worry about setting up the DVD player - almost all commercial movie DVDs are anamorphic so most people's DVD players are set up correctly - you just choose the type of TV in the DVD player setup menu and the letterbox is automatically applied if it's set up for a 4:3 TV (do you still use those 4:3 sets over there in the US?)

  • Secure boot question and user question

    would it be safe and possible to say install just the boot partition to a 32mb sd card keeping everything else on the main hard drive? maybe having the /root on a USB drive to avoid anyone using su to get to it and making it accessible for emergency purposes. i would also encrypt my home folder.
    does the above sound like a viable idea? and i am assuming so long as i install the card reader drivers during the initial setup i can just dd /boot/ over to the sd card.
    also on my arch installs i installed sudo and added my username to wheel which i gave all permissions with password. this should be safe and i should never need to actually su to root correct? or are there some advantages to su to root?

    I'm guessing you might have seen something like this?  I wanted to try that myself, but it apparently only works if your card can be picked up by the mobo as an internal drive.  Supposedly there's a way to hack or flash certain brands and models to achieve this, but I haven't looked into it in a while.  My card reader uses a USB internal connection, so it can't be used as-is: on boot, my BIOS searches only the selected source for the necessary files, so I can't have /boot on /dev/sdb grab the initramfs from /dev/sda1.  It could be entirely dependent on you board and BIOS, or may require extra work, but it's possible.  You'll just need to do some work to get the info for your machine.

  • WRT54G Firmware Question and Another Question If You Can Help...

    What do i do with the Firmware? I downloaded it to my computer and i dont know what to do next Can someone help?
    Also, When I try using the wireless router, the green bars are full but i cannot connect to the interet.
    Oh, and one more thing. When i plug everything into the Router the Power button and the WLAN lights stay on, but the Ehternet and Internet lights flash. Is this suppose to happen?
    If you have any ideas or suggestiosn, i am open minded THANKS!
    Message Edited by Celibonk89 on 06-21-2007 11:09 AM

    well you need to logon router's setup page, open I.E. and inthe address bar type 192.168.1.1, it would ask for username and password, put "admin"(default password) of router... go to administration tab >> firmware upgrade >> browse for firmware file and upgrade it, reset the router and reconfigure it according to ISP settings...
    ethernet and wireless lights are blinking staht indicates router is communicating withe wired connection as well wireless connection.

  • Where can I get a script  to submit questions and answer them?

    Is there a script out there that works like this?
    Visitor asks question on website, goes to Admin section. Admin answers question and now question and answer are posted together on the front page. Front page is constantly updated with these answered questions, newest on top. Search on top should search all of answered questions.

    It wouldn't be a script. You're asking about a whole category of functionality, including training the person who answers the emails.
    This could be implemented in a variety of ways, with a variety of capabilities, and with a variety of requirements and levels of efficiency. The choice you use will depend a lot on the hardware you're running on, the server and tools you use for your existing site, the amount of activity you expect, etc.
    If you're using an existing, well-supported application server and web development environment, then I expect that what you're asking for could be built within it pretty easily. It might even be available pre-built. But it's not like there's some generic "q/a tool script" in fifty lines of Java code that you can just dump on any web server and have it work magically in all cases.

  • On my iPhone i am trying to download a song on iTunes and it is asking to answer sercuity question and so I answer them and it saying my answer are wrong what do I do?

    I am trying to download music onto my phone and it is saying I need to answer sercurity questions and the questions they are asking I have never answered before therefore I don't know the answers and so when I put the answers I think it is they are wrong I don't know how to fix this I answered the questions twice and so I need help to answer them as I don't want to lock my phone please help me

    Not Possible...
    Contact iTunes Customer Service and request assistance
    Use this Link  >  Apple  Support  iTunes Store  Contact
    Good Luck.

  • Any Oracle Application Server 10g Administration I -- Dump Questions

    HI All,
    I have completed the Oracle Application Server 10g Admin I course and i am planning to take up the certification. But I am planning to take a practice exam before i apply to the certification. So is there any sort of dump questions for me to under stand what type of questions will come in the exam. Please let me know.
    Thanking You all in Advance.
    With Regards,
    Saravanan

    Well there are no dump questions. Try to get a copy of
    OCA Oracle Application Server 10g Administrator Exam Guide (Exam 1Z0-311) (Osborne Oracle Press)      
    second hand only about 20 dollars.
    It comes with a cd with a copy of the book and exam questions and you will be able to download an additional exam.

  • Performance issue and functional question regarding updates on tables

    A person at my site wrote some code to update a custom field on the MARC table that was being copied from the MARA table.  Here is what I would have expected to see as the code.  Assume that both sets of code have a parameter called p_werks which is the plant in question.
    data : commit_count type i.
    select matnr zfield from mara into (wa_marc-matnr, wa_marc-zfield).
      update marc set zfield = wa_marc-zfield
         where werks = p_werks and matnr = wa_matnr.
      commit work and wait.
    endselect.
    I would have committed every 200 rows instead of every one row, but here's the actual code and my question isn't around the commits but something else.  In this case an internal table was built with two elements - MATNR and WERKS - could have done that above too, but that's not my question.
                DO.
                  " Lock the record that needs to be update with material creation date
                  CALL FUNCTION 'ENQUEUE_EMMARCS'
                    EXPORTING
                      mode_marc      = 'S'
                      mandt          = sy-mandt
                      matnr          = wa_marc-matnr
                      werks          = wa_marc-werks
                    EXCEPTIONS
                      foreign_lock   = 1
                      system_failure = 2
                      OTHERS         = 3.
                  IF sy-subrc <> 0.
                    " Wait, if the records not able to perform as lock
                    CALL FUNCTION 'RZL_SLEEP'.
                  ELSE.
                    EXIT.
                  ENDIF.
                ENDDO.
                " Update the record in the table MARC with material creation date
                UPDATE marc SET zzdate = wa_mara-zzdate
                           WHERE matnr = wa_mara-matnr AND
                                 werks = wa_marc-werks.    " IN s_werks.
                IF sy-subrc EQ 0.
                  " Save record in the database table MARC
                  CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
                    EXPORTING
                      wait   = 'X'
                    IMPORTING
                      return = wa_return.
                  wa_log-matnr   = wa_marc-matnr.
                  wa_log-werks   = wa_marc-werks.
                  wa_log-type    = 'S'.
                  " text-010 - 'Material creation date has updated'.
                  wa_log-message = text-010.
                  wa_log-zzdate  = wa_mara-zzdate.
                  APPEND wa_log TO tb_log.
                  CLEAR: wa_return,wa_log.
                ELSE.
                  " Roll back the record(un save), if there is any issue occurs
                  CALL FUNCTION 'BAPI_TRANSACTION_ROLLBACK'
                    IMPORTING
                      return = wa_return.
                  wa_log-matnr   = wa_marc-matnr.
                  wa_log-werks   = wa_marc-werks.
                  wa_log-type    = 'E'.
                  " 'Material creation date does not updated'.
                  wa_log-message = text-011.
                  wa_log-zzdate  = wa_mara-zzdate..
                  APPEND wa_log TO tb_log.
                  CLEAR: wa_return, wa_log.
                ENDIF.
                " Unlock the record from data base
                CALL FUNCTION 'DEQUEUE_EMMARCS'
                  EXPORTING
                    mode_marc = 'S'
                    mandt     = sy-mandt
                    matnr     = wa_marc-matnr
                    werks     = wa_marc-werks.
              ENDIF.
    Here's the question - why did this person enqueue and dequeue explicit locks like this ?  They claimed it was to prevent issues - what issues ???  Is there something special about updating tables that we don't know about ?  We've actually seen it where the system runs out of these ENQUEUE locks.
    Before you all go off the deep end and ask why not just do the update, keep in mind that you don't want to update a million + rows and then do a commit either - that locks up the entire table!

    The ENQUEUE lock insure that another program called by another user will not update the data at the same time, so preventing database coherence to be lost. In fact, another user on a SAP correct transaction, has read the record and locked it, so when it will be updated your modifications will be lost, also you could override modifications made by another user in another luw.
    You cannot use a COMMIT WORK in a SELECT - ENDSELECT, because COMMIT WORK will close each and every opened database cursor, so your first idea would dump after the first update. (so the internal table is mandatory)
    Go through some documentation like [Updates in the R/3 System (BC-CST-UP)|http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCCSTUP/BCCSTUP_PT.pdf]
    Regards

  • Oracle Apps Objective question and answers

    Hi all,
    We need Oracle Apps(DBA, Tech & Funct) objective type questions with answer.
    Can you any one help to find the questions. Even if they are any links, dumps, doc please post them.
    Thanks,
    Ramaraju.

    HI Ramaraju,
    You can search for FAQ related to topics like adpatch, cloning etc etc
    Google should be your friend
    for DBA check this out its the best book
    Cracking the Oracle Apps DBA Interview: 325 Frequently Asked Questions  – June 12, 2009
    by Joyjeet Banerjee (Author)
    for technical
    http://oracleappstech12.blogspot.com/2012/08/oracle-apps-technical-interview.html
    Oracle Apps Technical Interview Questions, Answers for Freshers and Experienced asked in Job Interviews
    http://oracleapps4u.blogspot.com/2011/07/oracle-apps-interview-questions-and.html
    etc etc
    well for functional it depends on the module
    I'm not aware  of  any dump which covers all (administration, technical and functional )  of them so you need to Google as per the module for functional
    ApPsMaStI
    sharing is Caring

Maybe you are looking for