Occasional missing start-up chime

Every now and again - without any obvious cause that I can think of, the G5 starts up without its customary chime. Nothing wrong with the machine as far as I can tell - on checking System Profiler Diagnostics says "start-up test passed" each time.
1) Any ideas why this happens, and, more importantly,
2) should I be worried about it?

1. Might be time to replace the PRAM Battery, 4 years is close to their lifespan...
See which one your G5 has...
http://eshop.macsales.com/item/Newer%20Technology/CR2032/
http://eshop.macsales.com/item/Newer%20Technology/BAA36VPRAM/
2. No, not really by itself, unless it is the Battery, which can have very strange effects on G5s.

Similar Messages

Blank Screen after start-up chime, won't start

I'm rather perplexed as to what's happened to my PowerBook. I'll run throught it
PowerBook 12" 1.33 768
Background:
I've just updated it to 10.4.4, which caused it to get stuck at the Apple symbol and spinning wheel. I had to restart in single user mode and run applejack, restart again and it was fine.
Recently the PowerBook started to not wake from sleep, I'd have hold down the power button then restart it. I thought it had done teh same thing today, but this time it makes the start-up chime but gets no further than a blank (dark, black) screen.
I tried inserting the Mac OS X CD and start up holding down the C key, but still same blank screen (with the added benefit that I'm now unable to remove the CD)
I tried plugging it into an external monitor, but nothing.
I've tried resetting the Preference RAM and the PMU. With some limited success. On occasion after resetting the PRAM, turning it off then back on, it starts with something like a extra blow of air from the fan and white blank screen instead of a black one. It then won't turn off at all, the only way is to pull the power and the battery.
I've noticed that when the ac adapter is plugged in and i've the white screen it flashes very quickly, orange.
I tried starting in Tartget disc mode connected to an iMac, the disc doesn't appear.
I tried starting up with an external firewire drive attached, nothing.
I've tried starting holding the keys for open firmware mode, nothing.
I've removed the AirPort card, no change.
I removed the extra 512mb RAM with no change.
The screen is clearly working, has anyone any ideas how to get it started?
Any help would be appreciated, it's a second hand PowerBook and so has no AppleCare.
Cheers
Stuart

I had the EXACT same problem happen to me, Stuartea71. My PowerBook crashed on the on Feb. 4th and I still can't figure it out. I had just dowloaded the 10.4.4 update, bought iLife 06, and ordered a new battery.
I tried every single thing that you did above. I finally called customer support, and walked me through a few things which I had already tried, but she finally pin pointed something in disk utility that I missed. My disk would not mount. In red letters it said "failing." She told me that was a internal HD problem that needs to be fixed by a certified tech.
I did something I'd never done before. I put my HD to sleep to optimize battery performance. I work with podcasts and downloaded a large file. Unfortunately I forgot my battery setting. I chalk it up as a lesson learned, and just bit the bullet and ordered a MacBook Pro.
BTW... if you all customer service they basically read directly from the Apple Website. I paid $49 dollars for someone to tell me my mac was broken and send it in.

Missing start boundary exception, caused by an empty Part, how to handle?

Hello,
i wrote an application that automatically handles mails from laboratories. The only essential part of the mail is the attachment, where chemical analyses are submitted (from permitted addresses, recognized by whitelist and fileheader of the attachment). Other ways to submit data weren't allowed.
Currently a mail was received that can't be parsed. It's from a laboratory, that
use its provider's (a german internet suplier named Arcor) webmail, a browser-based mailing portal. It always worked fine, because they wrote some greetings. But this time they sent a blank message. The result is following structure of the mail:
MIME-Version: 1.0
Content-Type: multipart/mixed;
boundary="----=_Part_50112_10709369.1203586767396"
//Some X-Flags
------=_Part_50112_10709369.1203586767396
Content-Type: multipart/alternative;
boundary="*----=_Part_50111_24141780.1203586767396*"
------=_Part_50111_24141780.1203586767396--
------=_Part_50112_10709369.1203586767396
Content-Type: application/octet-stream
Content-Transfer-Encoding: base64
Content-Disposition: attachment; filename=somefile.bin
ABCDEF.... //Some binary data
------=_Part_50112_10709369.1203586767396--
It seems the webmailer creates an empty mailpart and only writes the end boundary (Line: ------=_Part_50111_24141780.1203586767396--).
I know, the start boundary is really missing.
I checked it out by getting a mailaccount from Arcor, and it always creates this structure when sending a message without a text. By the way, the Message-ID (header) generated from Arcor's server seems to be from javamail. (.....1234.567890.....JavaMail.ngmail@....).
I don't know how many mailclients create "empty" parts, but impossible is nothing (e.g. other or future webmailer services).
But how to handle?
The error occures when calling MimeMultipart.getCount(), which causes to parse the mail if not parsed. All actions, which cause the mail to be parsed, will end in this exception (for this mail).
I looked at the javamail source and found out, that the line of the empty part is not recognized as a boundary, because of its ending delimiters:
if (line.equals(boundary))
break;
So the boundary is added to the preamble. It goes on with reading lines from the stream, until line == null.
if (line == null)
throw new MessagingException("Missing start boundary");
Because there is no test, if the line matches the end boundary, it's not recognized. Wouldn't it be better in this case, to add an empty bodypart and set a variable to false (e.g. complete) instead of throwing an exception? Because MimeMultipart.parse() is called by other methods, like getCount, getBodyPart and writeTo, I can't nearly do anything automatically with the mail. How should i walk through the bodyparts and fetch the parts I'm interested in?
Subclassing seems to be difficult to me:
Object content = message.getContent();
//javax.mail.Message, won't return a subclassed multipart
if (content instanceof Multipart) {
//recursive method!
handleMultipart((Multipart) content); //collecting parts from multipart
Of course, I could ask the laboratory: "please send me a greeting!" ;-)
Greetings,
cliff

Interesting.
Yes, it's probably a bug that JavaMail allows you to
create a multipart with no body parts, since the
MIME specification doesn't allow that. Still, the
webmail application should be fixed so that it doesn't
try to do that, at least including an empty plain text
body part.
Please contact the webmail provider and tell them of
this bug in their application.
I'll also look into making JavaMail cope with these
broken messages more gracefully. Contact me
at [email protected] and I'll let you know when
I have a version ready to test.

How can I solve a "org.jvnet.mimepull.MIMEParsingException: Missing start boundary" when using "Page Attachments to Disk"?

I have built a streaming MTOM enabled web service for downloading large files. I also built a client that uses that service (with MTOM and streaming feature). Everything works, when the client calls the web service directly.
Then I have set up the OSB, so that I can call the service through the OSB. I have build a Business Service and a Proxy Service. For the Business Service, I use "XOP/MTOM Enabled", "Include Binary Data By Reference" and "Page Attachments to Disk" to prevent the OSB from loading the whole data into memory.
If I do not use the "Page Attachments to Disk" option, the download works, but I assume everything is loaded into the OSB memory.
When I use the "Page Attachments to Disk" option, I receive the following error message
Exception in thread "main" com.sun.xml.ws.fault.ServerSOAPFaultException: Client received SOAP Fault from server: Couldn't create SOAP message due to exception: org.jvnet.mimepull.MIMEParsingException: Missing start boundary Please see the server log to find more detail regarding exact cause of the failure.
    at com.sun.xml.ws.fault.SOAP11Fault.getProtocolException(SOAP11Fault.java:193)
    at com.sun.xml.ws.fault.SOAPFaultBuilder.createException(SOAPFaultBuilder.java:131)
    at com.sun.xml.ws.client.sei.StubHandler.readResponse(StubHandler.java:253)
    at com.sun.xml.ws.db.DatabindingImpl.deserializeResponse(DatabindingImpl.java:203)
    at com.sun.xml.ws.db.DatabindingImpl.deserializeResponse(DatabindingImpl.java:290)
    at com.sun.xml.ws.client.sei.SyncMethodHandler.invoke(SyncMethodHandler.java:119)
    at com.sun.xml.ws.client.sei.SyncMethodHandler.invoke(SyncMethodHandler.java:92)
    at com.sun.xml.ws.client.sei.SEIStub.invoke(SEIStub.java:161)
    at com.sun.proxy.$Proxy38.fileDownload(Unknown Source)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:57)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
    at java.lang.reflect.Method.invoke(Method.java:606)
    at weblogic.wsee.jaxws.spi.ClientInstanceInvocationHandler.invoke(ClientInstanceInvocationHandler.java:87)
    at com.sun.proxy.$Proxy39.fileDownload(Unknown Source)
    at largefiletransfer_osb_client.MtomClientDownload.main(MtomClientDownload.java:59)
Why do I get this exception and how can I solve the issue?
Additional Infos:
OS: Windows 7 64bit
Tool: JDeveloper BPM Suite 12.1.3.0.0
WebService: HTTP + SOAP + MTOM + Streaming

I have built a streaming MTOM enabled web service for downloading large files. I also built a client that uses that service (with MTOM and streaming feature). Everything works, when the client calls the web service directly.
Then I have set up the OSB, so that I can call the service through the OSB. I have build a Business Service and a Proxy Service. For the Business Service, I use "XOP/MTOM Enabled", "Include Binary Data By Reference" and "Page Attachments to Disk" to prevent the OSB from loading the whole data into memory.
If I do not use the "Page Attachments to Disk" option, the download works, but I assume everything is loaded into the OSB memory.
When I use the "Page Attachments to Disk" option, I receive the following error message
Exception in thread "main" com.sun.xml.ws.fault.ServerSOAPFaultException: Client received SOAP Fault from server: Couldn't create SOAP message due to exception: org.jvnet.mimepull.MIMEParsingException: Missing start boundary Please see the server log to find more detail regarding exact cause of the failure.
    at com.sun.xml.ws.fault.SOAP11Fault.getProtocolException(SOAP11Fault.java:193)
    at com.sun.xml.ws.fault.SOAPFaultBuilder.createException(SOAPFaultBuilder.java:131)
    at com.sun.xml.ws.client.sei.StubHandler.readResponse(StubHandler.java:253)
    at com.sun.xml.ws.db.DatabindingImpl.deserializeResponse(DatabindingImpl.java:203)
    at com.sun.xml.ws.db.DatabindingImpl.deserializeResponse(DatabindingImpl.java:290)
    at com.sun.xml.ws.client.sei.SyncMethodHandler.invoke(SyncMethodHandler.java:119)
    at com.sun.xml.ws.client.sei.SyncMethodHandler.invoke(SyncMethodHandler.java:92)
    at com.sun.xml.ws.client.sei.SEIStub.invoke(SEIStub.java:161)
    at com.sun.proxy.$Proxy38.fileDownload(Unknown Source)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:57)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
    at java.lang.reflect.Method.invoke(Method.java:606)
    at weblogic.wsee.jaxws.spi.ClientInstanceInvocationHandler.invoke(ClientInstanceInvocationHandler.java:87)
    at com.sun.proxy.$Proxy39.fileDownload(Unknown Source)
    at largefiletransfer_osb_client.MtomClientDownload.main(MtomClientDownload.java:59)
Why do I get this exception and how can I solve the issue?
Additional Infos:
OS: Windows 7 64bit
Tool: JDeveloper BPM Suite 12.1.3.0.0
WebService: HTTP + SOAP + MTOM + Streaming

Missing start boundary

Hi ,
i have Missing start boundary exception while reading message..
Following is message information.Can any one let me know how i can fix this problem.
Received: from backup1.texterity.com ([68.112.246.59]) by exchange2003.scientificmonitoring.com with Microsoft SMTPSVC(6.0.3790.1830); Thu, 8 Mar 2007 11:37:05 -0700
Received: from backup1.texterity.com (localhost.localdomain [127.0.0.1]) by backup1.texterity.com (8.13.1/8.13.1) with ESMTP id l28IaTnQ023719 for <[email protected]>; Thu, 8 Mar 2007 13:36:29 -0500
Received: (from textcafe@localhost) by backup1.texterity.com (8.13.1/8.13.1/Submit) id l28IaR1K023718; Thu, 8 Mar 2007 13:36:27 -0500
Content-Transfer-Encoding: binary
X-MimeOLE: Produced By Microsoft Exchange V6.5
Content-Type: multipart/alternative;
     boundary="----=_NextPart_000_20F60_01C76D97.08C9D40D"
MIME-Version: 1.0
X-Mailer: MIME::Lite 3.01 (F2.73; A1.67; B3.05; Q3.03)
Date: Thu, 8 Mar 2007 18:36:26 UT
From: <[email protected]>
Subject: Intech March 2007 Digital Edition
To: <[email protected]>
Message-ID: [email protected]
Return-Path: <[email protected]>
X-OriginalArrivalTime: 08 Mar 2007 18:37:05.0234 (UTC) FILETIME=[C51A9320:01C761B0]
This is a multi-part message in MIME format.
------=_NextPart_000_20F63_01C76D97.08C9D40D
Content-Disposition: inline
Content-Length: 1066
Content-Transfer-Encoding: quoted-printable
Content-Type: text/plain;
     charset="iso-8859-1"
You can now find your March issue of InTech at=20
http://pubsrv.texterity.com/cgi-bin/pwf_gateway.cgi?d=3Dwww.isa-intech-di=
gital.org&u=3D/intech/200703&s=3DCEGUsgx3DOlJm&e=3D3567746.=20
Each month, we will e-mail you a link to the current issue of InTech.
Your digital issue has the exact same content as a printed copy but with
unique features, such as the ability to:
*     Search and page through articles online=20
*     Zoom, print, or e-mail pages to a colleague=20
*     Archive your issues for convenient retrieval=20
We hope you enjoy your digital issues of InTech magazine. Thank you for
your readership.
Sincerely,=20
Gregory Hale
InTech Editor=20
Click here to convert to the print edition: =
http://pubsrv.texterity.com/cgi-bin/pwf_optout.cgi?c=3Dintech&e=3Djim@sci=
entificmonitoring.com&email_msgid=3D3567746
This email was sent to: [email protected]
Please do not reply to this mail.
For technical questions regarding the digital edition, email =
[email protected].
From ISA, PO Box 12277, 67 Alexander Drive, Research Triangle Park, NC =
27709
------=_NextPart_000_20F63_01C76D97.08C9D40D
Content-Disposition: inline
Content-Length: 4386
Content-Transfer-Encoding: quoted-printable
Content-Type: text/html;
     charset="iso-8859-1"
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<html>
<head>
<title>Intech Digital Edition</title>
<meta http-equiv=3D"Content-Type" content=3D"text/html; =
charset=3Diso-8859-1">
</head>
<body>
<IMG =
SRC=3D"http://pubsrv.texterity.com/cgi-bin/pwf_eds.cgi?transaction_type=3D=
datalog&[email protected]&publication=3Dintech=
&id_stamp=3Dintech.20070308133626&user_action=3Dviewmail&email_msgid=3D35=
67746" height=3D"0" width=3D"0" border=3D"0">
<TABLE WIDTH=3D613 BORDER=3D0 CELLPADDING=3D0 CELLSPACING=3D0>
     <TR>
          <TD COLSPAN=3D2><A =
HREF=3D"http://pubsrv.texterity.com/cgi-bin/pwf_gateway.cgi?d=3Dwww.isa-i=
ntech-digital.org&u=3D/intech/200703&s=3DCEGUsgx3DOlJm&e=3D3567746" =
TARGET=3D"_blank" TITLE=3D"Intech">
               <IMG BORDER=3D0 =
SRC=3D"http://www.texterity.com/images/intech/intech_header.gif" =
WIDTH=3D613 HEIGHT=3D116></A></TD></TR>
     <TR>
          <TD VALIGN=3DTOP WIDTH=3D144>
          <TABLE BORDER=3D0 CELLPADDING=3D6 CELLSPACING=3D6><TR =
ALIGN=3DCENTER><TD ALIGN=3DCENTER>
          <A =
HREF=3D"http://pubsrv.texterity.com/cgi-bin/pwf_gateway.cgi?d=3Dwww.isa-i=
ntech-digital.org&u=3D/intech/200703&s=3DCEGUsgx3DOlJm&e=3D3567746" =
TARGET=3D"_blank" TITLE=3D"Click here to read Intech">
          <IMG style=3D"border: solid 1px; border-color: black" =
SRC=3D"http://www.isa-intech-digital.org/tcprojects/isa/intech/inbox/3820=
4/imgpages/tn/intech200703_0001.gif"
               ALT=3D"Click here to read Intech"></A></TD></TR>
          <TR HEIGHT=3D109><TD> </TD></TR>
          <TR ALIGN=3DCENTER><TD ALIGN=3DCENTER><A =
HREF=3D"http://www.texterity.com" TARGET=3D"_blank">
          <IMG BORDER=3D0 =
SRC=3D"http://www.texterity.com/images/ViaTexterity.gif" width=3D132 =
height=3D45 ALT=3D"Digital Delivery Via =
Texterity"></A></TD></TR></TABLE></TD>
          <TD VALIGN=3DTOP><TABLE BORDER=3D0 CELLPADDING=3D6 =
CELLSPACING=3D6><TR><TD>
          <P style=3D"font-family:verdana,arial,helvetica,sans-serif; =
font-size:12px;">
          You can now find your March issue of InTech at <br><a =
href=3D"http://pubsrv.texterity.com/cgi-bin/pwf_gateway.cgi?d=3Dwww.isa-i=
ntech-digital.org&u=3D/intech/200703&s=3DCEGUsgx3DOlJm&e=3D3567746" =
target=3D"_blank">http://www.isa-intech-digital.org/intech/200703/</a>.
          </p>
          <P style=3D"font-family:verdana,arial,helvetica,sans-serif; =
font-size:12px;">Each month, we will e-mail you a link to the current =
issue of InTech. Your digital issue has the exact same content as a =
printed copy but with unique features, such as the ability to:</p>
          <ul><li style=3D"font-family:verdana,arial,helvetica,sans-serif; =
font-size:12px;">
          Search and page through articles online </li>
          <li style=3D"font-family:verdana,arial,helvetica,sans-serif; =
font-size:12px;">Zoom, print, or e-mail pages to a colleague</li>
          <li style=3D"font-family:verdana,arial,helvetica,sans-serif; =
font-size:12px;">Archive your issues for convenient retrieval</li></ul>
          <P style=3D"font-family:verdana,arial,helvetica,sans-serif; =
font-size:12px;">We hope you enjoy your digital issues of InTech =
magazine. Thank you for your readership.</p>
          <P style=3D"font-family:verdana,arial,helvetica,sans-serif; =
font-size:12px;">
          Sincerely,<br><br>
          Gregory Hale<br>
          InTech Editor
          </P>
     </TD></TR></TABLE>
</TD></TR></TABLE>
<TABLE WIDTH=3D613 BORDER=3D0 CELLPADDING=3D0 CELLSPACING=3D0><TR><TD>
     <table width=3D"100%" border=3D"0" cellspacing=3D"0" cellpadding=3D"0" =
bgcolor=3D"#FFFFEE">
          <tr><td>
          <IMG BORDER=3D0 =
SRC=3D"http://www.texterity.com/images/recycling-footer.gif" WIDTH=3D613 =
HEIGHT=3D11>
<font face=3D"arial" size=3D"1" color=3Dblack>
<a =
href=3D"http://pubsrv.texterity.com/cgi-bin/pwf_optout.cgi?c=3Dintech&e=3D=
[email protected]&email_msgid=3D3567746">Click here</a> to =
Convert to the print edition.<BR>
This email was sent to: [email protected]<BR>
If you cannot click on the links above, please copy and paste =
this url into your browser:<BR>
<a =
href=3D"http://pubsrv.texterity.com/cgi-bin/pwf_gateway.cgi?d=3Dwww.isa-i=
ntech-digital.org&u=3D/intech/200703&s=3DCEGUsgx3DOlJm&e=3D3567746">http:=
//www.isa-intech-digital.org/intech/200703/</A><BR>
Please do not reply to this mail.<BR>
For technical questions regarding the digital edition, email <a =
href=3D"mailto:[email protected]?subject=3DIntech%20Support%2=
0Request">[email protected]</a>.<BR>
From From ISA, PO Box 12277, 67 Alexander Drive, Research =
Triangle Park, NC 27709</font><br>
          </td></tr>
          <tr><td bgcolor=3D"#FFFFEE">
     </td></tr></table>
</TD></TR></TABLE>
</body>
</html>
------=_NextPart_000_20F63_01C76D97.08C9D40D--
can any one please help how i can fix this.

Right on all counts. I have been able to resolve #1 and #2 using the prescribed workarounds.
I'm still persuing #3 This seems to be the most common issue, as our application receives dozens of these each day. Our mail administrator gave the "it's working with everything else" response - of course everything else is probably not using the IMAP interface... If anyone has had a similar problem with Trend or Sophos specifically, let me know. I will need to output the raw IMAP stream, find the specific RFC 2822 violation and take it to the vendor. Any setting on the JavaMail side to compensate for the problem, would of course be helpful. I have to be careful not to break working messages that have file attachments, though. It's possible that my attempt of the workaround you described was incorrect - I'll go back and try it again with a simpler code example.
#4 I've not had success with JTNEF yet, but I'm not sure if it's even still a problem after the workaround for #2. Anyway, that one seems to be infrequent so it's low priority for me.
#5 As you mention in the other thread: this is a problem with a couple of email clients (Thunderbird and Apple Mail, possibly others) - maybe they are using a common library? Anyway, I'm going to try out the workaround posted in that thread if I can get more specifics.
It would be nice if the various workarounds could be handled within JavaMail, a global LIBERAL=true setting : ) , although I understand that could be a never-ending project for JavaMail considering the number of vendor problems. Also such workarounds could certainly cause "code entropy" within JavaMail code. Getting the vendor to fix their product also kind of depends on whether or not I have 'business leverage' on the buggy software. In my case, for example, I can apply leverage on virus gateway vendors to fix their product, but not on customers who are sending me incorrectly formatted emails and have the option of going elsewhere for business.
In any case, thanks for all the help - it has been greatly appreciated.

Javax.mail.MessagingException: Missing start boundary

I use the following code creates a Mime file
MimeMultipart mmp = new MimeMultipart();
               MimeBodyPart mbp = null;
               // add rootpart
               mbp = new MimeBodyPart();
               mbp.setContentID("[email protected]");
               mbp.setDataHandler(new DataHandler(new FileDataSource(args[0])));
               mmp.addBodyPart(mbp);
               // add attachment info
               for(int i = 1; i < args.length; i = i+2){
                    ByteArrayOutputStream baos = new ByteArrayOutputStream();
                    GZIPOutputStream gos = new GZIPOutputStream(baos);
                    FileInputStream fis = new FileInputStream(args[i+1]);
                    byte[] bytes = new byte[1024];
                    int len;
                    while((len = fis.read(bytes, 0, 1024)) > 0){
                         gos.write(bytes, 0, len);
                    fis.close();
                    gos.close();
                    baos.close();
                    InternetHeaders ih = new InternetHeaders();
                    ih.addHeader("Content-ID", args);
                    mbp = new MimeBodyPart(ih, baos.toByteArray());
                    mmp.addBodyPart(mbp);
               String CarriageReturn = String.valueOf(CARRIAGE_RETURN);
               String lineFeed = String.valueOf(LINE_FEED);
               String horizontaltab = String.valueOf(HORIZONTAL_TAB);
               FileOutputStream fos = new FileOutputStream(args[0] + ".mime");
               StringBuffer msgParam = new StringBuffer();
               msgParam.append("MIME-Version: 1.0");
               msgParam.append(CarriageReturn);
               msgParam.append(lineFeed);
               msgParam.append("Content-Type: ");
               msgParam.append(mmp.getContentType().replaceAll(CarriageReturn,"").replaceAll(lineFeed,"").replaceAll(horizontaltab,""));
               msgParam.append("; start=\"<[email protected]>\"");
               msgParam.append(CarriageReturn);
               msgParam.append(lineFeed);
               msgParam.append(CarriageReturn);
               msgParam.append(lineFeed);
               msgParam.append(CarriageReturn);
               msgParam.append(lineFeed);
               fos.write(msgParam.toString().getBytes());
               mmp.writeTo(fos);
               fos.close();
I can correctly read the mime file at windows OS，but in linux OS i got the following error Message:
2010/11/19 11:53:40     K101J2EED1     fatal     0041EBFC124735B5B67FFA9F4B3B09961KD1     例外=[javax.mail.MessagingException: Missing start boundary]
sun.reflect.GeneratedMethodAccessor303.invoke(Unknown Source)
sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
java.lang.reflect.Method.invoke(Method.java:597)
org.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:301)
org.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182)
org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149)
org.springframework.transaction.interceptor.TransactionInterceptor.invoke(TransactionInterceptor.java:106)
org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
org.springframework.aop.interceptor.ExposeInvocationInterceptor.invoke(ExposeInvocationInterceptor.java:89)
org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
org.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204)
$Proxy28.execute(Unknown Source)
org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor.java:431)
org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:236)
jp.terasoluna.fw.web.struts.action.RequestProcessorEx.process(RequestProcessorEx.java:149)
org.apache.struts.action.ActionServlet.process(ActionServlet.java:1196)
org.apache.struts.action.ActionServlet.doPost(ActionServlet.java:432)
javax.servlet.http.HttpServlet.service(HttpServlet.java:713)
javax.servlet.http.HttpServlet.service(HttpServlet.java:806)
org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:675)
org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:324)
jp.co.nttdata.erc.sys.app.extended.ExtendedFilter.doFilter(ExtendedFilter.java:163)
org.springframework.web.filter.DelegatingFilterProxy.invokeDelegate(DelegatingFilterProxy.java:183)
org.springframework.web.filter.DelegatingFilterProxy.doFilter(DelegatingFilterProxy.java:138)
org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:424)
org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:324)
jp.co.nttdata.erc.sys.app.extended.SetCharacterEncodingFilter.doFilter(SetCharacterEncodingFilter.java:174)
org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:424)
org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:324)
org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:379)
com.hitachi.software.web.catalina.core.ValveWrapper.invokeNext(LinkedPipeline.java:672)
com.hitachi.software.web.catalina.core.LinkedPipeline.invoke(LinkedPipeline.java:475)
org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:983)
org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:349)
com.hitachi.software.web.catalina.core.ValveWrapper.invokeNext(LinkedPipeline.java:672)
com.hitachi.software.web.tcg.ThreadControlGroupValve.invoke(ThreadControlGroupValve.java:82)
com.hitachi.software.web.catalina.core.ValveWrapper.invokeNext(LinkedPipeline.java:672)
com.hitachi.software.ejb.management.mbean.web.RequestStatisticsValve.invoke(RequestStatisticsValve.java:72)
com.hitachi.software.web.catalina.core.ValveWrapper.invokeNext(LinkedPipeline.java:672)
org.apache.catalina.valves.ErrorDispatcherValve.invoke(ErrorDispatcherValve.java:188)
com.hitachi.software.web.catalina.core.ValveWrapper.invokeNext(LinkedPipeline.java:672)
com.hitachi.software.web.catalina.core.StandardSessionValve.invoke(StandardSessionValve.java:96)
com.hitachi.software.web.catalina.core.ValveWrapper.invokeNext(LinkedPipeline.java:672)
com.hitachi.software.web.catalina.core.LinkedPipeline.invoke(LinkedPipeline.java:475)
org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:983)
org.apache.catalina.core.StandardContext.invoke(StandardContext.java:3928)
org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:261)
com.hitachi.software.web.catalina.core.ValveWrapper.invokeNext(LinkedPipeline.java:672)
org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:197)
com.hitachi.software.web.catalina.core.ValveWrapper.invokeNext(LinkedPipeline.java:672)
com.hitachi.software.web.catalina.core.LinkedPipeline.invoke(LinkedPipeline.java:475)
org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:983)
org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:174)
com.hitachi.software.web.catalina.core.ValveWrapper.invokeNext(LinkedPipeline.java:672)
com.hitachi.software.web.catalina.core.LinkedPipeline.invoke(LinkedPipeline.java:475)
org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:983)
org.apache.ajp.tomcat4.Ajp13Processor.process(Ajp13Processor.java:700)
org.apache.ajp.tomcat4.Ajp13Processor.run(Ajp13Processor.java:959)
java.lang.Thread.run(Thread.java:620)
Edited by: chengen on Nov 24, 2010 8:26 PM
Edited by: chengen on Nov 24, 2010 9:25 PM

I can correctly read the mime file at windows OS，but in linux OS i got the following error Message:That would suggest one or more of the following.
1. An end of line problem. Something is wrong with your use of CR/LF.
2. A line length problem (brief look suggests a 998 limit.)
3. One reader is more lenient than the other. This goes back to 1 and 2.

Correct way to copy Multipart and prevent Missing start boundary Exception

Hi there
I've worked through the FAQ's and forum and based on the info available tried to construct code to deal with the whole "javax.mail.MessagingException: Missing start boundary" problem. I keep on getting a ClassCastException though and was hoping you could scan through the code and let me know if you see anything. I must be missing something ... simplified extract of code below:
Multipart mp = (Multipart)part.getContent();
try {
     for (int i = 0; i < mp.getCount(); i++) {
          processBodyPart(wrapper, mp.getBodyPart(i), i);
} catch (MessagingException e) {
     // Converting Msg to a Copy (to fix boundary)
     ByteArrayOutputStream bos = new ByteArrayOutputStream();
     part.writeTo(bos);
     byte[] bytes = bos.toByteArray();
     MimeMessage newMsg = new MimeMessage(emailAccount.getSession(), new ByteArrayInputStream(bytes));
     String ct = newMsg.getContentType();
     newMsg.removeHeader("Content-Type");
     ct = ct.substring(0, ct.indexOf(";")); // Strip out the rest, only retain the content-type
     newMsg.setDataHandler(new DataHandler(newMsg.getContent(), ct));
     Multipart testMp = (Multipart)newMsg.getContent(); // <<-------- ClassCastException here!!
     for (int i = 0; i < testMp.getCount(); i++) {
          Part bp = testMp.getBodyPart(i);
          processBodyPart(bp);
}Much appreciated.
Marius

I took out the truncating part to make the example shorter,
but I did try both keeping it as it was, as well as truncating
it (it is "multipart/mixed") with the same effect.
I was able to save the entire message to file (thanks), attached
below - maybe you can spot something that could be causing it?
Thanks again.
X-Original-To: [email protected]
Delivered-To: [email protected]
Received: from mail.adept.co.za (localhost [127.0.0.1])
     by mail.adept.co.za (Postfix) with ESMTP id E3074C03D9
     for <[email protected]>; Fri, 18 Jan 2008 14:35:29 +0200 (SAST)
X-Greylist: from auto-whitelisted by SQLgrey-1.7.4
Received: from mail-03.jhb.wbs.co.za (mail-03.jhb.wbs.co.za [196.2.97.2])
     by mail.adept.co.za (Postfix) with ESMTP id CA3AEC03D7
     for <[email protected]>; Fri, 18 Jan 2008 14:35:28 +0200 (SAST)
Received: from localhost by mail-03.jhb.wbs.co.za;
18 Jan 2008 14:35:28 +0200
Date: 18 Jan 2008 14:35:28 +0200
To: [email protected]
From: "Mail Delivery System" <[email protected]>
Subject: Delivery Status Notification (Failure)
MIME-Version: 1.0
Content-Type: multipart/report; report-type=delivery-status; boundary="9sdJO.4G/vWebcc.bcm9J.Ak/cwPA"
Message-Id: <[email protected]>
X-Virus-Scanned: ClamAV Passed
X-Spam-Scanned: -1.4
X-Scanned-By: proxfilter
--9sdJO.4G/vWebcc.bcm9J.Ak/cwPA
content-type: text/plain;
    charset="utf-8"
Content-Transfer-Encoding: quoted-printable
The following message to <[email protected]> was undeliverable.
The reason for the problem:
5.1.2 - Bad destination host 'DNS Hard Error looking up onyxit.co.za (MX): =
NXDomain'
--9sdJO.4G/vWebcc.bcm9J.Ak/cwPA
content-type: message/delivery-status
Reporting-MTA: dns; jnb-mailfw01.wbs.co.za
Final-Recipient: rfc822;[email protected]
Action: failed
Status: 5.0.0 (permanent failure)
Diagnostic-Code: smtp; 5.1.2 - Bad destination host 'DNS Hard Error looking up onyxit.co.za (MX): NXDomain' (delivery attempts: 0)
--9sdJO.4G/vWebcc.bcm9J.Ak/cwPA
content-type: message/rfc822
Received: from wbs-smtp-out-02.jhb.wbs.co.za (HELO wbs-smtp-out-02) ([196.2.97.197])
by mail-03.jhb.wbs.co.za with ESMTP; 18 Jan 2008 14:35:28 +0200
Received: from wbs-smtp-out-02.jhb.wbs.co.za (HELO wbs-smtp-out-02) ([196.2.97.197])
by mail-03.jhb.wbs.co.za with ESMTP; 18 Jan 2008 14:35:28 +0200
Received: from wbs-41-208-227-16.wbs.co.za ([41.208.227.16] helo=jnfsworkpool)
     by wbs-smtp-out-02 with esmtp (Exim 4.67)
     (envelope-from <[email protected]>)
     id 1JFqSK-0000qy-8m; Fri, 18 Jan 2008 14:36:30 +0200
Date: Fri, 18 Jan 2008 14:35:10 +0200 (SAST)
From: Ros Copeling <[email protected]>
To: [email protected]
Cc: [email protected]
Message-ID: <[email protected]>
Subject: FW: Fw: Message from ESKOM
MIME-Version: 1.0
Content-Type: multipart/mixed;
     boundary="----=_Part_16_32195616.1200659710788"
X-Priority: 3
Importance: normal
Sensitivity: Normal
workpool_message_id: 6879
X-Original-Subject: FW: Fw: Message from ESKOM
X-Spam-Ignored: [TOO LARGE] Message > 100K
X-Scan-Signature: 66244f1a8ccb48c519852bcb33c1a261
--9sdJO.4G/vWebcc.bcm9J.Ak/cwPA--

How to I reset start up chime

Hello I am using my macbook in clamshell mode and my start up chime is not working. Is there anyway I can reset it?

Pram reset is usually how i do it. P+R+Option+Command

.MessagingException - Missing start boundary when loading a mail twice

Hi!
I have found a very interesting behaviour. When parsing a multipart mail twice, there is an error "javax.mail.MessagingException: Missing start boundary". This happens for every multipart mail which is fetched via POP3 and seems to be independant of both POP3 Server and the mail client the message was built with.
Environment:
debian linux, amd64, java 1.6
latest javamail from https://hg.kenai.com/hg/javamail~mercurial
Test program:
import java.io.*;
import javax.mail.*;
public class Mailtest {
     private final static void loadMail(Part p) throws Exception{
          Object content = p.getContent();
          if (content instanceof Multipart) {
               Multipart mp = (Multipart) content;
               int cnt = mp.getCount();
               for (int u=0;u<cnt;u++) {
                    loadMail(mp.getBodyPart(u));
     public final static void main(String[] args) throws Exception {
          //System.setProperty("mail.mime.cachemultipart", "true");
          java.util.Properties props = new java.util.Properties();
          Session mailSession = Session.getInstance(props, null);
          Store store = mailSession.getStore("pop3");
          store.connect("pop3srv", 110, "username", "pwd");
          Folder folder = store.getFolder("INBOX");
          folder.open(Folder.READ_WRITE);
          Message[] msgs = folder.getMessages();
          for (int i=0;i<msgs.length;i++) {
               /*if (msgs[i] instanceof com.sun.mail.pop3.POP3Message) {
                    System.out.println("inputstream");
                    InputStream in = msgs.getDataHandler().getInputStream();
                    in.close();
               System.out.println("i=" + i + " try = 1");
               loadMail(msgs[i]);
               System.out.println("i=" + i + " try = 2");
               loadMail(msgs[i]);
Output:
i=0 try = 1
i=0 try = 2
Exception in thread "main" javax.mail.MessagingException: Missing start boundary
at javax.mail.internet.MimeMultipart.parsebm(MimeMultipart.java:882)
at javax.mail.internet.MimeMultipart.parse(MimeMultipart.java:503)
at javax.mail.internet.MimeMultipart.getCount(MimeMultipart.java:244)
at testapp.Mailtest.loadMail(Mailtest.java:11)
at testapp.Mailtest.main(Mailtest.java:38)
Java Result: 1
I thought that the 2 code blocks which are commented might be a workaround, but nothing changed if both blocks are active.
BTW: What is "mail.mime.multipart.bmparse" supposed to do?

Yes, thank you, that's a bug introduced in the (not yet final) JavaMail 1.4.4 release.
I've fixed it. I'll push the fix soon.
mail.mime.multipart.bmparse is a property to control whether the old (slow) multipart parser
is used, or the new (fast) Boyer-Moore multipart parser is used.

My iMac turns on the start up chime sounds, you see the apple icon on the screen and then it just shuts off. Any ideas?

My iMac turns on the start up chime sounds, you see the apple icon on the screen and then it just shuts off. Any ideas?

Do these two resets:
SMC RESET
http://support.apple.com/kb/HT3964
Shut down the computer.
Unplug the computer's power cord and ALL peripherals.
Wait 15 seconds.
Attach the computers power cable.
Wait another 5 seconds and press the power button to turn on the computer.
The 5 second timing is important to a successful reset.
PRAM RESET
Zap the PRAM
Shut down the computer.
Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.

Multipart/report - Missing Start Boundary - MultiPart.getContent()

I am writing to you in regard to an issue that I have been facing recently, and I wanted to see if the JavaMail developers / community could provide any answers.
Does JavaMail support the multipart/report MIME specification (RFC 1892)?
The reason I ask, is that I have seen a strong correlation between errors in JavaMail and this content....
I am getting Missing Start Boundary exceptions when I execute this code on a message that has this Mime Type in it, (multipart/report)
mp = (Multipart)part.getContent();
count = mp.getCount(); // THIS IS WHAT THROWS THE ERROR
An example of this message header, would be
X-Atlas-MailScanner-From: [email protected]
Content-Type: multipart/report; report-type=delivery-status;
boundary="==IFJRGLKFGIR5607UHRUHIHD"
** NOTE HOW BOUNDARY IS SPECIFIED UNLIKE THE OTHER SECTIONS WHICH LEADS ME TO BELIEVE THE MISSING START BOUNDARY EXCEPTION **
--==IFJRGLKFGIR5607UHRUHIHD
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: base64
--==IFJRGLKFGIR5607UHRUHIHD
Content-Type: message/rfc822
I have seen older posts that talk about other people's problem regarding this Exception; however, have not seen an abstract way for circumventing the issue.
Any insight/future development intentions/experience in dealing with this issue would be greatly appreciated.
RR

I'm getting the same exception on several "bounce" messages I try to access with JavaMail. I believe that some of them are flat-out wrong in their MIME encoding, as there truly is no start boundary. However, some appear to be OK and causing JavaMail to give an exception. Should this be logged as a bug?
Here's an example similar to yours (I didn't include all the received headers and several addresses are munged):
<blockquote><i>{noformat}Date: Sat, 19 Apr 2008 06:57:46 -0400
From: [email protected]
Subject: Undelivered mail
To: x
Message-ID: <[email protected]>
MIME-Version: 1.0
Content-Type: multipart/report; report-type=delivery-status;
boundary="--TKFLZMMSbcaBDNCJdCBMaXGSRbVIAF"
--TKFLZMMSbcaBDNCJdCBMaXGSRbVIAF<br />
--> Error description:
Error-For: [email protected]
Error-Code: 5.1.1
Error-Text: No such list.
Error-End: One error reported.
--TKFLZMMSbcaBDNCJdCBMaXGSRbVIAF<br />
Content-Type: message/delivery-status
Reporting-MTA: dns; LISTS.NETSPACE.ORG
Final-Recipient: RFC822; [email protected]
Action: failed
Status: 5.1.1 (No such list)
--TKFLZMMSbcaBDNCJdCBMaXGSRbVIAF<br />
Content-Type: message/rfc822
Return-Path: <x>
X-Original-To: [email protected]
Received: from ppp91-122-170-233.pppoe.avangarddsl.ru (ppp91-122-170-233.pppoe.avangarddsl.ru [91.122.170.233]) by lists.netspace.org (Postfix) with ESMTP id 538527A53A for <[email protected]>; Sat, 19 Apr 2008 06:57:45 -0400 (EDT)
Received: from [91.122.170.233] by mx1.bne.server-mail.com; Sat, 19 Apr 2008 14:06:15 +0300
Message-ID: <01c8a226$87bfa580$e9aa7a5b@retentioncal53>
From: "x" <x>
To: <[email protected]>
Subject: The extracts of VPXL are Pueraria tuberose 75 mg, Mucuna pruriens 75 mg, Asteracantha longifolia 75 mg.
Date: Sat, 19 Apr 2008 14:06:15 +0300
MIME-Version: 1.0
Content-Type: text/plain; format=flowed; charset="Windows-1252"; reply-type=original
Content-Transfer-Encoding: 7bit
X-Priority: 3
X-MSMail-Priority: Normal
X-Mailer: Microsoft Outlook Express 6.00.2741.2600
X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2741.2600
TKFLZMMSbcaBDNCJdCBMaXGSRbVIAF{noformat}
</i></blockquote>

Missing start Boundary exception

Hi all,
I am evaluating an e-mal archiving software that utilizes javamail. I am getting a high number of messages that don't get archived, due to the Missing start Boundary exception.
Now I know, that often times e-mail messages don't get correctly constructed, but the sheer number of rejected messages really struck me.
So I gathered a message and loaded it into a text editor to check the boundary structure myself.
I have stripped the message down to reflect the boundary structure and I would like to know, if I missed anything, but I can't find out why javamail complains about a missing start boundary.
I could post the complete message as well, if my example should not be suitable for examining this issue.
So, here we go:
Content-Type: multipart/signed; protocol="application/x-pkcs7-signature"; micalg=sha1; boundary="------------ms020608030602020702090804"
     This is a cryptographically signed message in MIME format.
     --------------ms020608030602020702090804
     Content-Type: multipart/mixed; boundary="------------070406040008020802000107"
          This is a multi-part message in MIME format.
          --------------070406040008020802000107
          Content-Type: text/plain; charset=ISO-8859-1; format=flowed
          Content-Transfer-Encoding: quoted-printable
          Test f=FCr mailArchiva III
          --------------070406040008020802000107
          Content-Type: multipart/alternative; boundary="============_CoolerEmail_============"
               Date: Wed, 23 Apr 2008 07:41:31 -0700
               --============_CoolerEmail_============
               Content-Transfer-Encoding: binary
               --============_CoolerEmail_============
               Content-Transfer-Encoding: binary
               Content-Type: text/html; charset="iso-8859-1"
          --============_CoolerEmail_============--
     --------------070406040008020802000107--
     --------------ms020608030602020702090804
--------------ms020608030602020702090804--
Thanks,
Stephan

Hi Bill,
well, yes. It's one of a huge amount of messages being rejected. Actually I am not a programmer, but I try to deal with an archiving solution called mailArchiva. This software uses javamail and the mails get into the software using a postfix milter.
I wanted to make sure that my gateways don't mess up these messages, prior getting into negotiation with the developer about what could be wrong along the way.
I will now contact him and see, if I can get any more logs from the software.
Thanks,
Stephan

17" 1.83GHz Core 2 Duo iMac not making start up chime

Hey. I couldn't find an appropriate thread for this in the software issues board (since it seemed more like a software problem), so I came here. Anyway, my iMac no longer makes the startup chime. This isn't really a problem, but I do miss the startup chime. Thanks.

It might be that the initial system volume level is low or off.. that has happened to my Mac once or twice... lets hope it is.
http://docs.info.apple.com/article.html?artnum=302353
Startup chimes (or lack thereof) in conjunction with other symptoms may be a precursor to some issues. Just so you can look over it.
http://docs.info.apple.com/article.html?artnum=300552

How do I Stop 'Start up Chime' on OSx 10.8.5

How do I Stop 'Start up Chime' on OSx 10.8.5
I used to have it disabled on previous mac systems fine.
I want system sounds to still hear email alerts and facetime calls, but stop the annoying loud startup chime.
Any suggestions please. (startninka app didnt work!!)
Andy
OSX 10.8.5

CHIME CRIME update
no luck as yet! Working at home office and early starts are awful with the Chime so loud!!!!
I tired the adding programme to Terminal...did not work.
Also 'Chime Stopper'- (yet to test) https://www.macupdate.com/app/mac/13170/startup-chime-stopper
But...
I found last night the 'Startup Pref Pane' in System Prefs... this should stop the 'Chime Crime'
so i can only test this and see what happens
This could be the answer for OSX 10.8.5....
Will update you all if it works

Can not turn off, disable, mute, STOP the Apple boot start up chime on MacBook Pro using Yosemite 10.10.1

I understand why Apple forces the boot chime upon us for marketing and diagnostics, but I really want to disable the start up chime when booting my MacBook Pro laptop.
I have tried the sudo commands that worked in Mavericks.
nvram SystemAudioVolume=%80
and
nvram SystemAudioVolume=%00
They do not work with Yosemite.
I have also tried muting my laptop before shutting down and muting the sound entirely in System Preferences. This method does not work either.
Every time I boot the laptop I have to annoy every one in the library, or the cafe, or the airport, or the workplace.
Anyone have a solution for this?

lonestarry wrote:
I did that prior to posting, and the choices are very limited, or unreliable based on comments. There doesn't seem to be an app that can do this for 10.10.1 StartNinja was the only app that seems decent, but doesn't list Yosemite as a supported OSX version. I would like to avoid using an app to accomplish this anyway.
Then you are out of luck. Apple does not provide an on & off option or software regarding the start up chimes.

Occasional missing start-up chime

Similar Messages

Maybe you are looking for