Occasional resets/reboots and black screens

Hi everyone....
I have a slight problem with my computer that I hope that you people can shed some light on...
Most of the times it happens when I´m running a game (mostly BF1942), but it has happened when I´ve been using "normal" windows programs (like word, VB6, photoshop etc.)
The difference is that when I´m playing a game and the computer resets it exits the game and drops me on the desktop.
When it resets and I´m not in a game but only another windows prog, it will reboot the computer
O yes, the monitor. It can fade out both in windows and in-game
The monitor "clicks" and fades to black, then it comes back after 1-2 seconds.
I´ve been thinking that it might be a problem with my PSU (especially regarding the monitor issue since the G-card need it´s share of the power) but I´m also started to think that it might be the memorys that´s making this problem.
Any ideas??
(I just noticed that my memory settings isn´t on my sys.info, so I will update that when I come home from work)

Well I must say that by Far, the Best PSU for the Money $99.00 US, is the Enermax 465 EV (I just bought one myself) and you can Even get an Enermax with Dual +12V Rails ..Thats Right +12V-1 (For the System) and a +12V-2 (Just for the CPU).....And I have had Nothing but Members PMing me to that me for Pointing them in the Direction of the Enermax 465 EV>> This Guy Really Liked his New Enermax > https://forum-en.msi.com/index.php?threadid=41492&sid= ..Or you have $200.00 + US to spend, You can get the Absolute "Best" PSU at http://www.pcpowerandcooling.com and get the "Turbo Cool 510W Deluxe... This is the "Turbo-Cool 510" vs. Antecs 550 W True Power>> http://www.pcpowerandcooling.com/pdf/Turbo-Cool_510_vs.pdf .............Sean REILLY875

Similar Messages

Occasional Vertical Lines and Black screen

Hi. My powerbook just went out of applecare coverage in August. In May, my display started to flicker, going black with about 7 vertical purple and blue lines on the left side of the screen. I ran fsck, etc., and nothing was wrong. It only happened briefly at first, so I ignored it, but eventually it happened so often that I couldn't work for more than 5 mins, so I decided to go to the mac store. The mac store could not replicate the problem, but sent it out for repair. A new keyboard and logic board later and everything seemed to be fine. At least until August, right when applecare coverage ended. The problem is now happening rather infrequently, but I'm concerned that it will again become permanent like last time. Given that I am no longer covered, I was wondering if anyone had any advice on how to fix this myself. I've run fsck but nothing appears to be wrong. The fan is also over-working itself lately, which didn't happen the first time around. Thoughts?

Welcome to the Apple discussions.
You might return it to Apple, and ask them to fix it correctly this time. Generally, issues that start while under warranty, but are not fixed, will be covered, but it's on a case-by-case basis.
What you describe sounds like a video circuit issue, and with the video circuit embedded on the logic board, replacement is the solution, as Apple did when you took it in for repair. You can run the Apple hardware test, or use one of the TechTools products, to test the video circuit.

Ipod 4 is displaying blue frozen screen and black screen with apple logo. I try to turn power off but as soon as it goes out it automatically reboots. Plugged it into the usb port on my mac and it doesnt do anything. It doesnt appear in Itunes. Help?

ipod 4 is displaying blue frozen screen and black screen with apple logo. I try to turn power off but as soon as it goes out it automatically reboots. Plugged it into the usb port on my mac and it doesnt do anything. It doesnt appear in Itunes. Help?

Let the battery fully darain. After charging for an least an hour try a reset and restore. Use Recovery mode if necessary.
If not successful, then time for an appointment at the Genius Bar of an Apple store.

Blinking light and black screen

My 3rd gen apple tv light was blinking and giving a black screen. I reset it using my laptop nas instructed. It is still doing the same thing. (Light flashing and black screen) Where do i go from here?

May be an issue with it but try holding menu and up key on teh remote TOGETHER for 6 secs in case it's selecting an incorrect video mode - that option will cycle video modes. Check HDMI connection to display is not loose at either end.

My lumia 720 suddenly stuck and black screen with ...

Hi
My lumia 720 suddenly stuck and black screen with Nokia Symbol is displaying I have tried for soft reset but it doesnt work will someone help me its very urgent
varun

You can try to perform the soft reset again. If this would fail, below hardware key reset combination is what I can suggest. This deletes all the personal content of the phone.
Option 2: Hardware key combination
Use this option if the phone fails to fully switch on when pressing the power on key.
Note: No warning about data loss!
Nokia Lumia with Windows Phone 8
Step 1
Make sure the charger is disconnected.
1. Switch the power Off.
2. Press and hold the Volume down and connect the charger, if succeed an exclamation mark (!) is shown on the screen.
Step 2
Then input the keys in the following order:
1. Volume up
2. Volume down
3. Power
4. Volume down
Step 3
The phone will reset and boot up automatically. Please note that this may take several minutes.

T60 exhibiting 1 long and 2 short beep and black screen

Hello all,
i own a thinkpad t60 with ATI radeon x1300 graphics card. I read through your complete "T61p exhibiting 1 long and 2 short beep and black screen" thread and I have the same beep problem with my t60. Let me briefly explain you how the beeps occur in my system:
My t60 had this problem after I initally formatted my system and this 1 long and 2 short beeps used started occuring. But the strangest fact is that after those beeps and blank screen, the power light in the indicator light group is on along with battery and ac power lights. But then when I repeatedly switched on and off the system, the sequence of beeps dont occur all the time. Then I completely switched off the system and when I booted the next times I started pressing the ESC keys after pressing the on button. Most of the times ( 8 out of 10 times), the first 4 times it produced the same beep codes but after the 5th time, the system turns on. All those 5 times, I kept on pressing the ESC key once I powered on the system.
Also, every time I'd a chance I did run the pc doctor to find any pro blem with the board or video card, but every time it turned out to be fine. So now,every time I turn my system off or use a stanby/hibernate whichever turns the screeen off, on immediate reboot it comes out blank but with the power indicator light on.
Here by I also list any changes that I'd made:
1. I reformatted the system and only then this started to occur.
2. after reformatting lsat time, I forgot to change the boot sequence but now I;d fixed that by pressing F9 under startup in bios.
3. I'd also once replaced my RAM with a different one (have 4gb now, but I suppose t60 can support a max of 3gb). WIll this be a problem?
4. And in the recent times due to the ati3duag.dll BSOD has occured. Any idea what this error might be due to?
5. Due to all these uncertainities, I havent updated tot he latest ATI driver which is 8.593 * and I still have the 8.293* . Will updating to the new one be a problem?
I appreciate any help or guidance you can give me in this matter and I badly need to fix it for my projects.
Thanks
Vishak

I think your best way of diagnosing this is to remove the new ram and install only one chip, if the problem persists, try the other. If the problem persists, then I'd try booting from a Linux LiveCD (any will do but I'd recommend ubuntu.com). boot with the option to not change anything on your PC. If you get this same problem when booting linux, then you know it's a hardware problem, in which case I'd remove as much hardware as possible, drives, cards, etc... if it still persists, then you most likely have a bad system board. In this unfortunate event your best option would be a used one. A new one would cost more then the laptop is worth, but used T60 boards are pretty reasonable, I just found one for another member and could probably help you find one to if necessary, but lets hope it's just a ram chip. And by the way, your system is limited to 3GB, but in the chipset, and in your 32bit OS they came installed with. You can install 4GB, but it won't be able to use it all.
ThinkPad W-510 i7-820QM(1.73-3.06GHz) Quad Core... ThinkPad T500, T9900, 8gb SSD...FrankNpad T-60p/61p (X9000 2.8ghz) 8gb SSD ips FlexView...ThinkPad T-61p (T9300 2.5ghz) 8gb ram...Thinkpad X-61 Tablet 4gb ram...ThinkPad A-31 (1.9ghz P4 1.5gb ram)

Lenovo G560 - Issue with won't boot and black screen after HDD upgrade

Lenovo G560 - Issue with won't boot and black screen after HDD upgrade.
What happen: My laptop was working fine, no blue screen issue, no funny business at all. I bought a new SSD Intel 120 GB and thought it would be a good idea to replace the HDD. I shutdown and disconnected the power adapter, waited a couple of minutes and removed the battery. I opened up the back case and replaced the HDD. And put all the screws back and put the battery back in.
Problem: The very first time I turned the power on, nothing happens besides a black screen. I pressed the dvd drive it works and opens up and closes. I waited for about 30 mins and still has blac screen. When I mean black screen, no bios menu, no logo, just a black screen with the fan sound on.
I have tried these:
1. Unplugged everything - battery, adapter, and pressed the power on button for about 60 seconds, nothing, the laptop turns on with the LED display on for both on and battery LED's. But nothing but black screen, no sound of windows loading just the fan and black screen.
2. I tried putting back my old 2.5" and nothing but black screen.
Thoughts and suggestions?
Solved!
Go to Solution.

Hi Autoexit173,
Welcome to Lenovo Community!
As per the query we understood that you are facing issue with system not booting in your Lenovo G560 laptop.
As you have mentioned that the system not booting, please try to remove the RAM and turn on the system and check if you can hear any beep sound. Also try to clean the RAM slots and check for the issue.
Click here for the steps to remove the RAM and refer page number 40.
Hope this helps. Do post back if issue persists!
Best regards,
Ashwin.S
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

My iphone 5 died so I plugged it back in to charge and it will not turn on. It will turn to the screen with the apple logo and black screen then turn off again. Any suggestions?

My iphone 5 died so I plugged it back in to charge and it will not turn on. It will turn to the screen with the apple logo and black screen then turn off again. Any suggestions?

I leave it charging until it gets back to full, usually it turns on after a little bit of time after plugging it in, but all its doing is going to the apple logo screen and going blank again.

Panic message restart grey and black screen

WOONT RE BOOT OR START
Computer froze and after manual power down and restart, grey and black screen appeared with a message to hold powwer button down to power off and then hold power button again to restart. I did and got same screen and message. "PANIC" and "Debugger called: <panic>" message in background.

Hi Fred,
Is this happening for all Flash content or just your website? Can you give us a link so we can take a look? Can you also please post back with your system's configuration report?
Windows Instructions
Mac Instructions
Please check to see if you are using the NPAPI version of the Flash Player plugin in Chrome. Let me know if you need instructions on how to do this. If you are, please try switching back to the PPAPI version to see if that corrects the problem.
I'm moving this post over to the Flash Player beta forum.
Thanks,
Chris

Phone doesn't appear in iTunes and black screen!!

Phone doesn't appear in iTunes and black screen i cant do nothing please help me!!

I read this article.
I can't restore iPod because iPod Updater can't recognize it, when one connect to the computer.
How to solve the problem: as i wrote, iTunes diagnostic informs that can't find the controller IEEE 1394 (WiFi), but I HAVEN'T WiFi card on computer, I use USB 2.0.

Have a 27 imac desktop with mac osx 10.5.8, finally got out of grey and black screens etc. is there anything I can do to prevent all this from happening again when I shut down?

Have a 27 imac desktop with mac osx 10.5.8, finally got out of grey and black screens etc. is there anything I can do to prevent all this from happening again when I shut down? Or before I shutdown? TIA.

Basic Backup
For some people Time Machine will be more than adequate. Time Machine is part of OS X. There are two components:
1. A Time Machine preferences panel as part of System Preferences;
2. A Time Machine application located in the Applications folder. It is
     used to manage backups and to restore backups. Time Machine
     requires a backup drive that is at least twice the capacity of the
     drive being backed up.
Alternatively, get an external drive at least equal in size to the internal hard drive and make (and maintain) a bootable clone/backup. You can make a bootable clone using the Restore option of Disk Utility. You can also make and maintain clones with good backup software. My personal recommendations are (order is not significant):
1. Carbon Copy Cloner
2. Get Backup
3. Deja Vu
4. SuperDuper!
5. Synk Pro
6. Tri-Backup
Visit The XLab FAQs and read the FAQ on backup and restore. Also read How to Back Up and Restore Your Files. For help with using Time Machine visit Pondini's Time Machine FAQ for help with all things Time Machine.
Although you can buy a complete external drive system, you can also put one together if you are so inclined. It's relatively easy and only requires a Phillips head screwdriver (typically.) You can purchase hard drives separately. This gives you an opportunity to shop for the best prices on a hard drive of your choice. Reliable brands include Seagate, Hitachi, Western Digital, Toshiba, and Fujitsu. You can find reviews and benchmarks on many drives at Storage Review.
Enclosures for FireWire and USB are readily available. You can find only FireWire enclosures, only USB enclosures, and enclosures that feature multiple ports. I would stress getting enclosures that use the Oxford chipsets especially for Firewire drives (911, 921, 922, for example.) You can find enclosures at places such as;
1. Cool Drives
2. OWC
3. WiebeTech
4. Firewire Direct
5. California Drives
6. NewEgg
All you need do is remove a case cover, mount the hard drive in the enclosure and connect the cables, then re-attach the case cover. Usually the only tool required is a small or medium Phillips screwdriver.

What to do when the apple logo and black screen persist (apple tv)

What to do when the apple logo and black screen persist, when connecting apple tv.

Have you unplugged from the power for 30 secs and retried?
If it constantly still does that it may have become corrupted and you'd need to restore via iTunes:
Restoring your Apple TV - Apple Support

20" imac won't start up-flashes between blank grey screen and black screen

20" imac
2GHz Intel Core 2 Duo
Was running system 10.5.8 just fine. Worked great.
But then I wanted to give the imac to a relative. And so, I tried to boot from the original grey mac install dvd to wipe the hardrive and set the imac back to factory specs.
But it wouldn't boot off the dvd. All It would do at restart was to flash slowly back and forth between blank grey screen and black screen. So, I tried the Leopard update dvd. Same results. So I zapped the pram and tried again. Same results.
If I just pushed the start button tho.. the imac would start right up and run fine. However, I didn't want to give it to someone else with all our information on it.
I finally restarted it and held the "T" key to turn it into a giant firewire drive, hooked it up to our other 20" imac, and used the disk utility from the second imac to erase the drive of the first imac. Then I inserted the grey install dvd into the second imac and selected the drive of the first imac and ran the install process.
Now, the first imac won't start up at all. Just a continual grey screen for a bit, than a couple of buzz sounds in the machine and then the black screen... than back again.
It ran great before I erased the drive and re-installed OS 10.5
What's wrong? How do I get the machine to either boot off the install cd?

So, I've figured out a little more on the first machine. It's a 20" 2.6 GHz Intel Core 2 Duo running 10.5.8.
It ran great. But, I wanted to erase the hard drive and reinstall the OS system before giving it to a relative.
I found that although the optical drive would read and write to normal cds and dvds, the machine would NOT boot from the grey start-up disks I had on hand. ( I have two imacs, and I tried both sets of dvds without success.)
I zapped the PRAM, and used disk utilities via firewire connection from my other 20" imac to check the hardrive and make repairs. Disk Utilities couldn't find any problems. So, using disk utilities from the other imac, I erased the first imac's harddrive and then used the install dvds on the second imac to install the original OS to the hard drive of the first imac.
(looking on the hard drive of the first imac, I can see all the contents)
However, the first machine will not start up. It just switches from grey....to black..... then grey..... and then black again.... over and over
Why won't it boot from the newly installed OS on it's own hard drive?
And Why won't it boot from the original install dvds?
How can I get it to start up again?

Macbook Pro Retina Crashes and reboots to black screen

My Macbook Pro (10,1) crashes at semi-random times and immediately reboots, but with a black screen. Everything on the Mac seems to be running fine, I can activate VoiceOver and reboot using keyboard shortcuts. It then boots normally, sometimes displaying this dialog. It happens both in Mac OS X and Windows. It has happend with only Safari open, but it always happens when starting a game of Civilization V in Windows or starting a Netflix video in Safari or Chrome in OS X.
After resetting the SMC and NVRAM nothing seemed to change, except sometimes instead of rebooting with a black screen it reboots into this.
System Information:
Mac OS X 10.8.4 Build 12E55
Boot ROM Version:          MBP101.00EE.B02
SMC Version (system):          2.3f35
Has anybody else experienced this or have any idea how to fix it?

This?
Interval Since Last Panic Report: 51460 sec
Panics Since Last Report:          26
Anonymous UUID:                    2126263E-555C-E24E-E344-FDF7FC6D9065
Tue Sep 10 19:56:29 2013
panic(cpu 0 caller 0xffffff7fa28b1f1a): "GPU Panic: [<None>] 3 0 a0 d9 9 8 0 3 : NVRM[0/1:0:0]: Read Error 0x00000100: CFG 0xffffffff 0xffffffff 0xffffffff, BAR0 0x112e00000 0xffffff8114dae000 0x0e7150a2, D0, P1/4\n"@/SourceCache/AppleGraphicsControl/AppleGraphicsControl-3.4.5/src/AppleM uxControl/kext/GPUPanic.cpp:127
Backtrace (CPU 0), Frame : Return Address
0xffffff811454b590 : 0xffffff802061d626
0xffffff811454b600 : 0xffffff7fa28b1f1a
0xffffff811454b6d0 : 0xffffff7fa0d3df1e
0xffffff811454b790 : 0xffffff7fa0e1212d
0xffffff811454b7d0 : 0xffffff7fa0e1218e
0xffffff811454b840 : 0xffffff7fa1135146
0xffffff811454b8b0 : 0xffffff7fa0e3aa75
0xffffff811454b8d0 : 0xffffff7fa0d44d50
0xffffff811454b980 : 0xffffff7fa0d427d0
0xffffff811454bb80 : 0xffffff7fa0d43845
0xffffff811454bc60 : 0xffffff7fa0ce0570
0xffffff811454bdf0 : 0xffffff7fa0cdf326
0xffffff811454be10 : 0xffffff7fa2875286
0xffffff811454bef0 : 0xffffff7fa2875176
0xffffff811454bf40 : 0xffffff7fa28741e7
0xffffff811454bf60 : 0xffffff802063e25e
0xffffff811454bfb0 : 0xffffff80206b3137
      Kernel Extensions in backtrace:
         com.apple.driver.AppleMuxControl(3.4.5)[49FEF732-D7A3-327B-A7AA-6AC5A6E3DCFF]@0 xffffff7fa28a4000->0xffffff7fa28b6fff
            dependency: com.apple.driver.AppleBacklightExpert(1.0.4)[1D0BB11E-7D71-34CF-ACC3-57DF01CADA 08]@0xffffff7fa289f000
            dependency: com.apple.iokit.IOPCIFamily(2.7.3)[1D668879-BEF8-3C58-ABFE-FAC6B3E9A292]@0xffff ff7fa0c46000
            dependency: com.apple.driver.AppleGraphicsControl(3.4.5)[4A2C8548-7EF1-38A9-8817-E8CB34B8DC A6]@0xffffff7fa288b000
            dependency: com.apple.iokit.IOACPIFamily(1.4)[A35915E8-C1B0-3C0F-81DF-5515BC9002FC]@0xfffff f7fa1797000
            dependency: com.apple.iokit.IONDRVSupport(2.3.7)[6C8CFC18-75F0-3DEF-86C7-CEB2C1FD6BB1]@0xff ffff7fa0cc8000
            dependency: com.apple.iokit.IOGraphicsFamily(2.3.7)[990D1A42-DF16-3AB9-ABC1-6A88AC142244]@0 xffffff7fa0c85000
         com.apple.NVDAResman(8.1.2)[96AE69DE-8A37-39D0-B2D3-D8446A6AA670]@0xffffff7fa0c dc000->0xffffff7fa0f81fff
            dependency: com.apple.iokit.IOPCIFamily(2.7.3)[1D668879-BEF8-3C58-ABFE-FAC6B3E9A292]@0xffff ff7fa0c46000
            dependency: com.apple.iokit.IONDRVSupport(2.3.7)[6C8CFC18-75F0-3DEF-86C7-CEB2C1FD6BB1]@0xff ffff7fa0cc8000
            dependency: com.apple.iokit.IOGraphicsFamily(2.3.7)[990D1A42-DF16-3AB9-ABC1-6A88AC142244]@0 xffffff7fa0c85000
         com.apple.nvidia.gk100hal(8.1.2)[8007AA34-6789-37E9-B069-A414AA26C6B6]@0xffffff 7fa0f8d000->0xffffff7fa12befff
            dependency: com.apple.NVDAResman(8.1.2)[96AE69DE-8A37-39D0-B2D3-D8446A6AA670]@0xffffff7fa0c dc000
            dependency: com.apple.iokit.IOPCIFamily(2.7.3)[1D668879-BEF8-3C58-ABFE-FAC6B3E9A292]@0xffff ff7fa0c46000
         com.apple.driver.AGPM(100.12.87)[621C8E31-07A5-38AC-95C9-F600FA62270B]@0xffffff 7fa2873000->0xffffff7fa2882fff
            dependency: com.apple.iokit.IOPCIFamily(2.7.3)[1D668879-BEF8-3C58-ABFE-FAC6B3E9A292]@0xffff ff7fa0c46000
            dependency: com.apple.driver.IOPlatformPluginFamily(5.3.0d51)[7B50B447-FF44-3529-9505-3F49C F1CCB4F]@0xffffff7fa17a0000
            dependency: com.apple.iokit.IONDRVSupport(2.3.7)[6C8CFC18-75F0-3DEF-86C7-CEB2C1FD6BB1]@0xff ffff7fa0cc8000
            dependency: com.apple.iokit.IOGraphicsFamily(2.3.7)[990D1A42-DF16-3AB9-ABC1-6A88AC142244]@0 xffffff7fa0c85000
BSD process name corresponding to current thread: kernel_task
Mac OS version:
12E55
Kernel version:
Darwin Kernel Version 12.4.0: Wed May 1 17:57:12 PDT 2013; root:xnu-2050.24.15~1/RELEASE_X86_64
Kernel UUID: 896CB1E3-AB79-3DF1-B595-549DFFDF3D36
Kernel slide:     0x0000000020400000
Kernel text base: 0xffffff8020600000
System model name: MacBookPro10,1 (Mac-C3EC7CD22292981F)
System uptime in nanoseconds: 2085445833823
last loaded kext at 5275234850: com.apple.driver.AppleHWSensor          1.9.5d0 (addr 0xffffff7fa266d000, size 36864)
last unloaded kext at 146616598548: com.apple.iokit.IOEthernetAVBController          1.0.2b1 (addr 0xffffff7fa17fe000, size 28672)
loaded kexts:
com.protech.NoSleep          1.3.3
com.apple.driver.AppleHWSensor          1.9.5d0
com.apple.driver.AudioAUUC          1.60
com.apple.iokit.IOBluetoothSerialManager          4.1.4f2
com.apple.filesystems.autofs          3.0
com.apple.filesystems.ntfs          3.10
com.apple.driver.ApplePlatformEnabler          2.0.6d1
com.apple.driver.AGPM          100.12.87
com.apple.driver.X86PlatformShim          1.0.0
com.apple.driver.AppleMikeyHIDDriver          122
com.apple.driver.AppleHDA          2.3.7fc4
com.apple.GeForce          8.1.2
com.apple.iokit.BroadcomBluetoothHCIControllerUSBTransport          4.1.4f2
com.apple.driver.AppleMikeyDriver          2.3.7fc4
com.apple.driver.AppleUpstreamUserClient          3.5.10
com.apple.driver.AppleLPC          1.6.0
com.apple.iokit.IOUserEthernet          1.0.0d1
com.apple.Dont_Steal_Mac_OS_X          7.0.0
com.apple.driver.AppleSMCLMU          2.0.3d0
com.apple.driver.AppleIntelHD4000Graphics          8.1.2
com.apple.driver.AppleSMCPDRC          1.0.0
com.apple.driver.ApplePolicyControl          3.4.5
com.apple.driver.AppleIntelFramebufferCapri          8.1.2
com.apple.driver.AppleMuxControl          3.4.5
com.apple.driver.AppleMCCSControl          1.1.11
com.apple.driver.AppleUSBTCButtons          237.1
com.apple.driver.AppleUSBTCKeyboard          237.1
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless          1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib          1.0.0d1
com.apple.BootCache          34
com.apple.driver.XsanFilter          404
com.apple.iokit.IOAHCIBlockStorage          2.3.1
com.apple.driver.AppleUSBHub          5.5.5
com.apple.driver.AppleSDXC          1.4.2
com.apple.driver.AirPort.Brcm4331          615.20.17
com.apple.driver.AppleAHCIPort          2.5.2
com.apple.driver.AppleUSBEHCI          5.5.0
com.apple.driver.AppleUSBXHCI          5.6.0
com.apple.driver.AppleEFINVRAM          1.7
com.apple.driver.AppleSmartBatteryManager          161.0.0
com.apple.driver.AppleACPIButtons          1.7
com.apple.driver.AppleRTC          1.5
com.apple.driver.AppleHPET          1.8
com.apple.driver.AppleSMBIOS          1.9
com.apple.driver.AppleACPIEC          1.7
com.apple.driver.AppleAPIC          1.6
com.apple.driver.AppleIntelCPUPowerManagementClient          196.0.0
com.apple.nke.applicationfirewall          4.0.39
com.apple.security.quarantine          2.1
com.apple.driver.AppleIntelCPUPowerManagement          196.0.0
com.apple.iokit.IOSerialFamily          10.0.6
com.apple.kext.triggers          1.0
com.apple.iokit.IOSCSIArchitectureModelFamily          3.5.5
com.apple.driver.DspFuncLib          2.3.7fc4
com.apple.iokit.IOAudioFamily          1.8.9fc11
com.apple.kext.OSvKernDSPLib          1.6
com.apple.iokit.AppleBluetoothHCIControllerUSBTransport          4.1.4f2
com.apple.nvidia.gk100hal          8.1.2
com.apple.NVDAResman          8.1.2
com.apple.driver.AppleHDAController          2.3.7fc4
com.apple.iokit.IOHDAFamily          2.3.7fc4
com.apple.iokit.IOSurface          86.0.4
com.apple.iokit.IOBluetoothFamily          4.1.4f2
com.apple.driver.AppleSMBusPCI          1.0.11d0
com.apple.iokit.IOAcceleratorFamily          74.5.1
com.apple.driver.X86PlatformPlugin          1.0.0
com.apple.driver.AppleSMC          3.1.4d2
com.apple.driver.IOPlatformPluginFamily          5.3.0d51
com.apple.driver.AppleGraphicsControl          3.4.5
com.apple.driver.AppleBacklightExpert          1.0.4
com.apple.iokit.IONDRVSupport          2.3.7
com.apple.driver.AppleSMBusController          1.0.11d0
com.apple.iokit.IOGraphicsFamily          2.3.7
com.apple.driver.AppleUSBMultitouch          237.3
com.apple.iokit.IOUSBHIDDriver          5.2.5
com.apple.driver.AppleThunderboltDPInAdapter          1.8.9
com.apple.driver.AppleThunderboltDPAdapterFamily          1.8.9
com.apple.driver.AppleThunderboltPCIDownAdapter          1.2.6
com.apple.driver.AppleUSBMergeNub          5.5.5
com.apple.driver.AppleUSBComposite          5.2.5
com.apple.driver.AppleThunderboltNHI          1.7.8
com.apple.iokit.IOThunderboltFamily          2.4.0
com.apple.iokit.IO80211Family          530.4
com.apple.iokit.IONetworkingFamily          3.0
com.apple.iokit.IOUSBUserClient          5.5.5
com.apple.iokit.IOAHCIFamily          2.3.1
com.apple.iokit.IOUSBFamily          5.6.0
com.apple.driver.AppleEFIRuntime          1.7
com.apple.iokit.IOHIDFamily          1.8.1
com.apple.iokit.IOSMBusFamily          1.1
com.apple.security.sandbox          220.3
com.apple.kext.AppleMatch          1.0.0d1
com.apple.security.TMSafetyNet          7
com.apple.driver.DiskImages          345
com.apple.iokit.IOStorageFamily          1.8
com.apple.driver.AppleKeyStore          28.21
com.apple.driver.AppleACPIPlatform          1.7
com.apple.iokit.IOPCIFamily          2.7.3
com.apple.iokit.IOACPIFamily          1.4
com.apple.kec.corecrypto          1.0
Model: MacBookPro10,1, BootROM MBP101.00EE.B02, 4 processors, Intel Core i7, 2.3 GHz, 8 GB, SMC 2.3f35
Graphics: Intel HD Graphics 4000, Intel HD Graphics 4000, Built-In, 512 MB
Graphics: NVIDIA GeForce GT 650M, NVIDIA GeForce GT 650M, PCIe, 1024 MB
Memory Module: BANK 0/DIMM0, 4 GB, DDR3, 1600 MHz, 0x80AD, 0x484D54333531533642465238432D50422020
Memory Module: BANK 1/DIMM0, 4 GB, DDR3, 1600 MHz, 0x80AD, 0x484D54333531533642465238432D50422020
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0xEF), Broadcom BCM43xx 1.0 (5.106.98.100.17)
Bluetooth: Version 4.1.4f2 12041, 2 service, 11 devices, 1 incoming serial ports
Network Service: Wi-Fi, AirPort, en0
Serial ATA Device: APPLE SSD SM256E, 251 GB
USB Device: hub_device, 0x8087 (Intel Corporation), 0x0024, 0x1d100000 / 2
USB Device: hub_device, 0x0424 (SMSC), 0x2512, 0x1d180000 / 3
USB Device: Apple Internal Keyboard / Trackpad, apple_vendor_id, 0x0263, 0x1d182000 / 5
USB Device: BRCM20702 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0x1d181000 / 4
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8286, 0x1d181300 / 6
USB Device: hub_device, 0x8087 (Intel Corporation), 0x0024, 0x1a100000 / 2
USB Device: FaceTime HD Camera (Built-in), apple_vendor_id, 0x8510, 0x1a110000 / 3
USB Device: USB Receiver, 0x046d (Logitech Inc.), 0xc531, 0x14200000 / 1

My iphon is not charging and not resetting, just a black screen appearing

My iphon isnt charging. I started recharging, when there was 40% charging left. But it didnt work both with USB and wall charger. I am now trying to reboot and reset, but its not working. Just a black scree is appeared. What to do?

Try a different cable to charge, use only a wall charger, clean the dock connector on the bottom of the phone.

Occasional resets/reboots and black screens

Similar Messages

Maybe you are looking for