OCI 9.2 libraries with Visual studio 2005

I have a project which uses OCI version 9.2 to connect to the database. We are planning on upgrading the compiler from Visual Studio 2003 to Visual Studio 2005. Can we still use the same libraries or do we need new library versions compatible with the new compiler. If yes, where can I access the new libraries.
TIA
Bharat

I've gotten OCI programs written in C using vs.net 2005 to work with Oracle 9i.
However, a library written in C using vs.net 2005 fails to work from a C# 2005 program. It causes a C runtime failure. I have no idea why.
But the same C library and C# program using vs.net 2003 works (ie. can successuflly connect to Oracle).

Similar Messages

Crystal Report Dll problem with Visual Studio 2005

I am using Crystal Reports with Visual Studio 2005. At one time there were two different version of Crystal Decision Dll in Global Assembly Cache (GAC). So I uninstalled both the versions and then only installed 10.2.3600.
I am facing the following error when building my application in visual studio.
The type 'CrystalDecisions.CrystalReports.Engine.ReportDocument' exists in both 'c:\WINDOWS\Microsoft.NET\Framework\v2.0.50727\Temporary ASP.NET Files\arms website\301a5b02\e03ad7d9\assembly\dl3\c30f5560\00f92427_3857ca01\CrystalDecisions.CrystalReports.Engine.DLL'
and
'c:\WINDOWS\assembly\GAC_MSIL\CrystalDecisions.CrystalReports.Engine\10.2.3600.0__692fbea5521e1304\CrystalDecisions.CrystalReports.Engine.dll'
I have only installed it in .Net Framework. For some reason it appears in the temp folder. I cannot delete it and when I renamed it after the next compile it came back again.
I would appreciate any help.

Thanks for the tip.
I installed CR XI R2 with SP2 and 2.1
There are few reports in the system they use to run fine but now when I try to run them I get the following error:
Failed to open the connection. Details: [Database Vendor Code: 4060 ] Failed to open the connection. C:\DOCUME1\SSheikh\LOCALS1\Temp\ZGA370 {71BFCD35-F652-48C8-896D-B93229A4D2C2}.rpt Details: [Database Vendor Code: 4060 ]
I understand that these reports run ok independently and on production machine as well; however when I try to run them from my development machine I get the above error.
I would appreciate help to resolve this. The code of the report is with report developer and I need to know what settings do I need to change where to be able to run the reports. Also I use my machine for deployment of application on the production server.
Thanks.

Connect to oracle database with visual studio 2005

Hi, i have a oracle database called orcl (10.2). I am trying to connect with this database with visual studio 2005. I do this:
In Server Explorer, right click in Data Connection and click in add connection.
I choose oracle database and oracle provider.
In server name I write the name of my computer, and i write the user and pass of the data base (sys or system) but it gives me this error: "ora-12514 listener doesnt know the asket for service in the description one of connection" (translated of Spanish)
what i have to write in server name? host, host:port, LISTENER,.... what?
Thanks

Sometimes, you can check names using from the command line:
$> tnsping <orcl>
TNS Ping Utility for 32-bit Windows: Version 8.1.7.0.0 - Production on 10-ENE-20
06 09:01:04
(c) Copyright 1997 Oracle Corporation. All rights reserved.
Attempting to contact (ADDRESS=(PROTOCOL=TCP)(HOST=server1)(PORT=1521))
Realizado correctamente (0 mseg)
$>

How to compile AnyConnect API with Visual Studio 2005?

Gooday,
I have downloaded anyconnect-win-vpnapi-2.5.3055.zip and am unable to build successfully examples.sln on a Windows XP SP2 platform. I would appreciate help in how to build examples.sln sucessfully. I get the following errors depending on the type of build using Visual Studio 2005 with service pack 1:
1. Debug configuration for all - "Fatal error C1900: mismatch between 'P1' version '20060201' and 'P2' version '20050411'
- appears a static lib file is out of date?
- i downloaded and used as is so don't know how else to resolve it
2. Release configuration for all - "Fatal error C1047: The object or library file '.\Release\PrivateApi.obj' was created with an older compiler than other objects; rebuild old objects and libraries' "
Thanx,tom.

You duplicated Java_Test_getWord. The function signature should read:JNIEXPORT jstring JNICALL Java_Test_getWord(JNIEnv *env, jobject obj) Regards

156" width Crystal Report with Visual Studio 2005

Post Author: kunchesm
CA Forum: .NET
Hi,
I have a requirement to design a 156" width report (for exporting to Excel). And naturally i dont have printers to support this huge width reports (as these reports are not used for printing but just for exporting to Excel).
One of the option which i have tried to design these reports is -
- Installed MIcrosoft XPS Document writer and
- Created a new server form (in Printers&Faxes>File>Server Properties) and assigned my custom width & Height for the paper size as per my requirement
- Used this printer and form in my crystal report
Now, my question... is there any better alternative or option to design huge width Crystal reports in Visual studio 2005? Any help in this regard is highly appreciated!
Thanks & Regards
ksm

Hi Ganesh,
So it all depends on how you created your WEB Project. If it was a CR Web App then no issues, if it was a WEB Form app then no issues except you need to copy the whole folder: C:\inetpub\wwwroot\VS2013WebsiteCR\aspnet_client
to your app folder, maybe...
If it was an empty WEB app then it may be an issue with permissions ( more on this soon once we do some testing, R&D may have provided a work around to get IIS Express to work, not sure about using IIS directly.
Also search on Sessions and PostBacks, to get the second page you need to keep the session open/active. If not you may get nothing ot the same page everytime.
Don

Visual Studio App Wizard won't install with Visual Studio 2005

When I try run the Visual Studio App Wizard from the Acrobat SDK V8.1 on my PC it tells me 'Please install Visual Studio 2005 before install Acrobat 8 Plugin Wizard'. I have Visual Studio 2005 installed with SP1. I also have the .NET framework 2.0.50727 SP1 loaded. I see this same problem on two different PC's with the same software configuration loaded. Any known issues with that?

I've never seen this happen. It's been a while since I last installed the
v9 SDK and it's plug-in wizard, so I don't remember how the installation
went.
I do most of my plug-in work on the Mac, where there is no plug-in wizard,
so I don't use it - not even on Windows. You do not need it to start a new
plug-in: Just use either the Starter plug-in from the samples, or the
BasicPlugin project. This will give you something that compiles and runs.
Then do a few simple text replacements to give things the proper names and
use that as your starting point. The wizard will give you a few more things
in regards to HFTs, but it's not complicated or time consuming to do that
by hand. The good thing about having to do this every now and then is that
it keeps your memory fresh about how HFTs work.
If you want to save yourself some time, create your own starter plug-in
that you mark up with comments about what you need to replace and why - put
all the stuff in that you usually need and then just use that every time
you need to start a new plug-in. Setting up a plug-in framework is usually
a very small portion of the time that you will eventually spent on the
plug-in development, so using the wizard will not save you much in the
overall development time.
Karl Heinz Kremer
PDF Acrobatics Without a Net
[email protected]
http://www.khkonsulting.com
On Sat, Nov 3, 2012 at 12:55 PM, Ramon F Herrera

Crystal Reports 2008 SP3 with Visual Studio 2005 help !!

Have application that uses reports developed using CR2008. The reports in question are created from an XML datasource and are populated at runtime with a dataset.
The reports work fine on developement machine but the client machines keep displaying the database login prompt.
What do I need to do to fix this

Something is not right here. If you are looking at assembly versions, then there are versions 12.0.200.0 and 12.0.1100.0 - framework 2 and framework 1.1 respectively. These do not change from SP to SP.
File versions do change. So, the assemblies for CR 2008, SP 3 would be 12.3.2000.601. Version 12.3.1100.601 is not familiar to me...
So, what libraries are you refering to? What is the version of the crpe32.dll?
BTW., sharing of log files is typically reserved for [phone|http://store.businessobjects.com/store/bobjamer/en_US/pd/productID.98078100?resid=S6I@hgoHAkEAAGsiyVkAAAAR&rests=1282226845369] cases.
- Ludek

Can I use ODT 10.2 with Visual Studio 2005 and 10g Express?

If so could anyone provide a pointer to some installation instructions? The one time I tried to install it I didn't seem to be able to connect to the database from within VS. I had to resort back to the previous version of ODT running under VS 2003.
Thanks in advance,
Stewart

The special version of ODT for Express only works with VS 2003 and it is an older version of the software that does not include the PL/SQL debugger.
That being said, you can install the latest ODAC and use it with Express with no problem.
Go here:
http://www.oracle.com/technology/software/tech/windows/odpnet/index.html
..and download the first link you see. Install it in the default Oracle home it chooses. Then you'll need to configure the tnsnames.ora file in the \NETWORK\ADMIN directory such that there is an alias for your Express database... you could probably just copy the tnsnames.ora file from the Express home to the new oracle home to achieve this.

APPCRASH FieldPointOPC2.EXE with Visual Studio 2005

At seemingly random intervals the following error occurs while running application in the development environment and with the release version. Is there any way to solve this?
Problem signature:
Problem Event Name:    APPCRASH
Application Name:    FieldPointOPC2.EXE
Application Version:    4.1.0.15
Application Timestamp:    407206d3
Fault Module Name:    LKSOCK.dll_unloaded
Fault Module Version:    0.0.0.0
Fault Module Timestamp:    45c36dca
Exception Code:    c0000005
Exception Offset:    700736b0
OS Version:    6.0.6000.2.0.0.256.1
Locale ID:    1033
Additional Information 1:    ee0c
Additional Information 2:    0f3137665bbf0bb676c8a16f3fa76e52
Additional Information 3:    562b
Additional Information 4:    58019b32234d4a81ca33d299b8e55c9b
Read our privacy statement:
http://go.microsoft.com/fwlink/?linkid=50163&clcid=0x0409

Hi,
What modules are you using? Please specify all your hardware. Is there a pattern to these crashes occuring? Which version of LabVIEW are you using? Are you using your VB program using DataSocket or some other OPC software? What exactly is your application? What operating system and specs does your computer have?
Can you please check the CPU usage while running the program?
I need a lot of information so I can narrow the use case down.
Warm regards,
Karunya R
National Instruments
Applications Engineer

Visual Studio 2005 crashes when referencing ALI 6.5 portal server API

Visual Studio 2005 crashes when referencing ALI 6.5 portal server API
We are building new portlets in .NET 2.0 to that access the ALI 6.5 server API and are experienceing the folowing scenario:
I create a brand new project in Visual Studio (2005 with SP1 on Win2k3 R2 SP2) using the ALI Portal Project template that is provided with the application accelerator 1.1. This portlet will need to perform portal server searches so I begin by adding references to the following assemblies from C:\bea\alui\ptportal\6.5\bin\assemblies:
openconfig.dll
opencounters.dll
opencache.dll
openhttp.dll
openssl.dll
opentempfile.dll
plumtreeserver.dll
ptportalobjects.dll
I then type in something like below to start up the portal server objects.
protected void Page_Load(object sender, EventArgs e)
IOKContext context = OKConfigFactory.createInstance("C:\\bea\\alui\\settings\\", "portal");
PortalObjectsFactory.Init(context);
this.Response.Write("Portal Objects Initiallized");
Some moments later Visual Studio will crash. It has happened before I have entered any code, after I have started typing code and on builds. It seems intermittent but usually occurs within a minute of interacting with this Visual Studio project. I actually managed to build once and have had success accessing this page in Explorer to validate the portal server objects are getting initialized and referenced correctly.
I thought this was a problem with my personal development environment. So I tried this on other machines: another Win2k3 ALI 6.5 dev portal server and another server with Visual Studio 2005 that I installed the 6.5 portal on just for testing this. The exact behavior listed above is occurring on three development machines here (crashing devenv.exe when portal references are made or loading a project with portal references). Since this does not seem to be isolated to a single development machine, is there any course of action that anyone would suggest to help solve this?
thanks,
Troy Rackley

It turns out that this is only a problem with Visual Studio using the ALI templates or creating any projects using the "New... Web site" functionality of 2005. I was a ble to create a C#... ASP.net Web Application project and add the references to the idk and the local portal server APIs manually without devenv.exe crashes.
So, the work around I have found if your projects needs to access both the portal server API and the remote API is to create the project with:
New... Project... Visual C#... ASP.NET Web Application
and NOT
New... Web Site... ASP.NET Web Site (or ALI Portlet Project)
Anyone know why this is the case?
Thanks.
Troy

Create plug-in for Adobe with Visual Studio 2008

Hi to all, I'm Italian excuse for my english,
I see Adobe SDK Help, but I don't see something for built a plug-in with Visual Studio 2008, I see only built with Visual Studio 2005!
my asks is : Because ? Can I create a plug-in with Visual Studio 2008? if yes WHAT did it?
thanks

Post your question in the 'Acrobat Developers SDK' forum.

XML in InDesign CS2 and Visual Studio 2005

Hello!
A year ago I made a plug in to InDesign CS1 with the purpose of importing an XML file and create a lay outed table of its contents. The reason I choose to make a plug in was because I didn't find InDesign very dynamic in its XML support.
Now I'm being asked to do a similar but more complex solution for InDesign CS2, which I never used before, and I understand a lot has happened since CS1.
How is the XML support in CS2 now a days?
And by the way, is there any problems with Visual Studio 2005 and the InDesign SDK that you know of?
Best Regards
Kristoffer

I'm sorry, I posted this thread in the wrong area. I will repost in the InDesign SDK area. My bad.
Best Regards
Kristoffer

[IDCS3 WIN] Visual Studio 2005 SP1

Hi Folks,
Has anyone had success using Visual Studio 2005 SP1 to compile and run CS3 plug-ins?
I'm having a troubles running ID CS3 plug-ins complied with Visual Studio 2005 SP1 and running under Windows Vista. I know SP1 is not officially supported, but I had it installed. Before I go through the downgrade dance, I would like to know if downgrading has a chance to solve this issue...
The plug-in runs fine on Windows XP SP2 on the machine on which I compiled the plug-in. The plug-in does not run on a Windows Vista machine on which no compiler is installed.
So, I have complied the BasicPanel project, and when run on a Windows Vista machine (of which I only have access to one), I get the following error (as seen in the Configure Plug-ins window for the plug-in). Plug-in Information window's Errors section reads:
LoadLibrary failed. The application has failed to start because its side-by-side configuration is incorrect. Please see the application event log for more detail.
After reading through a bunch of online information about this error, I'm still as confused as ever (I'm more comfortable with Mac than Windows). It seems like (maybe?) there might be an issue with the dlls that ID has installed versus the ones that my complied plug-ins are interested in. Maybe VS2005 SP1 has newer dlls than are installed in ID CS3 and that's where the trouble lies?
Can anyone here shed any light on this for me?
Thanks in advance!!!!!
-- Jim

Hi All!
I create plug-ins for InDesign CS2 using Visual Studio C++ 2005 Expres Edition.
The plug-in runs fine in the computer that the VS C++ 2005 ED is installed.
But I get this error in computers where there is no VS C++ 2005 ED intalled:(xp sp2)
LoadLibrary failed. The application has failed to start ...
Thanks to your posts I come to the solution that installing,
Visual C++ 2005 Redistributable Package (x86) on the machine that has no VS C++ 2005 ED intalled, really solved the problem.
My Question is Has Any one solved the problem without having to install the Redistributable Package.??
I read something about the manifest but I'm confused.
Geting VS C++ 2003 really solves the problem, but It's hard for me to find I Licenced copy.
Thank you!

Measurement studio for visual studio 2005

Hello, I'm currently using an ELVIS-II with Visual Studio 2005 for the measurement studio. I'm attempting to light up the 8 LEDs on the right of the ELVIS-II using a connection to the DIO 0 - DIO 7 ports, and a Digital Output program created using the NIO DAQ Windows application. However after I compiled the program and clicked the "Write" button on the Form1.cs it displays a message saying "You must populate the data to write before writing the data" . Can someone explain to me what's wrong with the program? many thanks: )
Attachments:
LEDerror.JPG ‏174 KB

So sorry, the code I've posted was sightly modified by me while trying to find a solution. This is the "unmodified" version. basically the "//" was removed before the "throw new System.NotImplementedException("You must populate the data to write before writing the data.");" line.
Attachments:
LEDRun0003.txt ‏2 KB

Running Visual Studio 2005 on a Mac with Intel Core Duo chip?

My nephew has been teaching himself Visual Basic (Visual Studio 2005) for several months on an old, out-dated PC laptop. My sister, who knows nothing about computers and didn't want to ask for help (in case somebody tipped off my nephew) wanted to buy him a new laptop. She said the salesperson told her that he can install XP SP2 on the Mac and then run any Windows software application (including VS 2005). My nephew has been using the new laptop (Powerbook 15") for less than a week and absolutely loves it. But he doesn't know if he can actually keep it (because he needs to be able to run VS 2005). He asked me and I didn't know so I figured I'd ask.
Any chance he'll be able to install XP SP2, VS 2005, run it, code with it and compile with it (all part of VS 2005)? Or is he going to have to return it and just go back to a PC laptop?
Thanks for any information/advice you can give. I'm seeing him tomorrow so I'm hoping I'll have some good news for him.
OOTInAtlanta

My bad. It is one of the new one's. I believe it is a MacBook Pro. I think the MacBook itself only comes in 13"?? His is definitely 15" and she bought it brand new. I am pretty sure it is a MacBook Pro.
If it is, you think he'll be able to keep it and do a dual-boot thing (for using VS 2005)? Is there anything special he'll need to know?
Thanks again for any information you can give. It is very much appreciated.

OCI 9.2 libraries with Visual studio 2005

Similar Messages

Maybe you are looking for