OCI-call 'olog' failed: rc = 1034, CONNECT failed with sql error '1034'
Hi
While starting the SAP from mmc I can see these error messages in dev_w0 file .
Any please could help us.
Sukrut S
Hi Sukrut,
¿Is your DB running? If not, ¿Any recent change to the init.ora?
And, if it's yes: ¿Have you changed something at adm user's environment since last startup? ¿Can you run a "R3trans -d" and send the output from r3trans.log?
Regards,
JC Llanes.
Similar Messages
-
Getting error with DbSl Trace: OCI-call 'olog' failed: rc = 1017
Hi,
We are working on osdbmigration, exporting from oracle to SQL Server.
When we run ./R3SETUP -f DBEXPORT.R3S getting the below error:
INFO 2011-06-10 05:17:46 R3SZCHK_IND_ORA R3ldctlDo:0
DbSl Trace: OCI-call 'olog' failed: rc = 1017
DbSl Trace: CONNECT failed with sql error 1017
We have performed allthe pre-checks successfully and can able to connect system/manager at SQL.
Regards,
Karthik.Have you followed the Note 400241 - Problems with ops$ or sapr3 connect to Oracle
-
CONNECT failed with sql error '1017'
Hello,
nus650pa:dv8adm 23% more trans.log
4 ETW000 R3trans version 6.05 (release 46D - 12.07.06 - 16:40:00).
4 ETW000 ===============================================
4 ETW000
4 ETW000 control file: <no ctrlfile>
4 ETW000 R3trans was called as follows: R3trans -d
4 ETW000 date&time : 14.08.2014 - 16:58:18
4 ETW000 trace at level 2 opened for a given file pointer
4 ETW000 [developertra,00000] Thu Aug 14 16:58:19 2014 170924 0.170924
4 ETW000 [developertra,00000] db_con_init called 1225 0.172149
4 ETW000 [developertra,00000] create_con (con_name=R/3) 22426 0.194575
4 ETW000 [developertra,00000] Loading DB library '/usr/sap/DV8/SYS/exe/run/dboraslib.so' ...
4 ETW000 136 0.194711
4 ETW000 [developertra,00000] load shared library (/usr/sap/DV8/SYS/exe/run/dboraslib.so), hdl 0
4 ETW000 369207 0.563918
4 ETW000 [developertra,00000] Library '/usr/sap/DV8/SYS/exe/run/dboraslib.so' loaded
4 ETW000 174 0.564092
4 ETW000 [developertra,00000] function DbSlExpFuns loaded from library /usr/sap/DV8/SYS/exe/run/dboraslib.so
4 ETW000 694 0.564786
4 ETW000 [developertra,00000] Version of library '/usr/sap/DV8/SYS/exe/run/dboraslib.so' is "46D.00", patchlevel (0.2186)
4 ETW000 15725 0.580511
4 ETW000 [developertra,00000] function dsql_db_init loaded from library /usr/sap/DV8/SYS/exe/run/dboraslib.so
4 ETW000 60 0.580571
4 ETW000 [developertra,00000] function dbdd_exp_funs loaded from library /usr/sap/DV8/SYS/exe/run/dboraslib.so
4 ETW000 121 0.580692
4 ETW000 [developertra,00000] New connection 0 created 96 0.580788
4 ETW000 [developertra,00000] db_con_connect (con_name=R/3) 14511 0.595299
4 ETW000 [developertra,00000] find_con found the following connection for reuse:
4 ETW000 53 0.595352
4 ETW000 [developertra,00000] Got ORACLE_HOME=/oracle/DV8/920_64 from environment
4 ETW000 73038 0.668390
4 ETW000 [developertra,00000] -->oci_initialize 589 0.668979
4 ETW000 [developertra,00000] Got ORACLE_SID=DV8 from environment 56 0.669035
4 ETW000 [developertra,00000] Got NLS_LANG=AMERICAN_AMERICA.WE8DEC from environment
4 ETW000 52 0.669087
4 ETW000 [developertra,00000] Logon as OPS$-user to get SAPR3's password 33 0.669120
4 ETW000 [developertra,00000] Connecting as /@DV8 on connection 0 ... 91 0.669211
4 ETW000 [developertra,00000] -->oci_logon(con_hdl=0, user='', dbname='DV8') 999 0.670210
4 ETW000 [developertra,00000] Thu Aug 14 16:58:20 2014 245280 0.915490
4 ETW000 [dboci.c ,00000] *** ERROR => OCI-call 'olog' failed: rc = 1017 263 0.915753
4 ETW000 [dbsloci. ,00000] *** ERROR => CONNECT failed with sql error '1017'
4 ETW000 858 0.916611
4 ETW000 [developertra,00000] Try to connect with default password 38 0.916649
4 ETW000 [developertra,00000] Connecting as SAPR3/<pwd>@DV8 on connection 0 ...
4 ETW000 53 0.916702
4 ETW000 [developertra,00000] -->oci_logon(con_hdl=0, user='SAPR3', dbname='DV8')
4 ETW000 46 0.916748
4 ETW000 [dboci.c ,00000] *** ERROR => OCI-call 'olog' failed: rc = 1017 118256 1.035004
4 ETW000 [dbsloci. ,00000] *** ERROR => CONNECT failed with sql error '1017'
4 ETW000 86 1.035090
4 ETW000 [developertra,00000] Got ORACLE_SID=DV8 from environment 716 1.035806
4 ETW000 [developertra,00000] Got NLS_LANG=AMERICAN_AMERICA.WE8DEC from environment
4 ETW000 55 1.035861
4 ETW000 [developertra,00000] Logon as OPS$-user to get SAPR3's password 33 1.035894
4 ETW000 [developertra,00000] Connecting as /@DV8 on connection 0 ... 29 1.035923
4 ETW000 [developertra,00000] -->oci_logon(con_hdl=0, user='', dbname='DV8') 28 1.035951
4 ETW000 [dboci.c ,00000] *** ERROR => OCI-call 'olog' failed: rc = 1017 126719 1.162670
4 ETW000 [dbsloci. ,00000] *** ERROR => CONNECT failed with sql error '1017'
4 ETW000 165 1.162835
4 ETW000 [developertra,00000] Try to connect with default password 36 1.162871
4 ETW000 [developertra,00000] Connecting as SAPR3/<pwd>@DV8 on connection 0 ...
4 ETW000 47 1.162918
4 ETW000 [developertra,00000] -->oci_logon(con_hdl=0, user='SAPR3', dbname='DV8')
4 ETW000 42 1.162960
4 ETW000 [dboci.c ,00000] *** ERROR => OCI-call 'olog' failed: rc = 1017 123784 1.286744
4 ETW000 [dbsloci. ,00000] *** ERROR => CONNECT failed with sql error '1017'
4 ETW000 70 1.286814
4 ETW000 [dblink ,00627] ***LOG BY2=>sql error 1017 performing CON 1140 1.287954
4 ETW000 [dblink ,00627] ***LOG BY0=> 42 1.287996
2EETW169 no connect possible: "DBMS = ORACLE --- dbs_ora_tnsname = 'DV8'"
Please help.
Thanks
Priyanshu SrivastavaHi
Could you check this SAP Notes Error message
"ORA-01017: invalid username/password; logon denied
BR310E Connect to database instance DV8 failed"
1576837 - ORA-01017: invalid username/password;
1860519 - SAP fails to connect to the database
BR
SS -
R3trans CONNECT failed with sql error '1019'
Hi,
I am having this error executing R3trans d
4 ETW000 [developertra,00000] Logon as OPS$-user to get SAPR3's password 33 0.031892
4 ETW000 [developertra,00000] Connecting as /@HCP on connection 0 ... 42 0.031934
4 ETW000 [developertra,00000] -->oci_logon(con_hdl=0, user='', dbname='HCP') 61 0.031995
4 ETW000 [dboci.c ,00000] *** ERROR => OCI-call 'olog' failed: rc = 1019 2592 0.034587
4 ETW000 [dbsloci. ,00000] *** ERROR => CONNECT failed with sql error '1019'
Could you please assist me with this?
Thanks,
Iqbalhere is the env
NLS_LANG=AMERICAN_AMERICA.WE8DEC
COLUMNS=164
ORACLE_BASE=/oracle
EDITOR=vi
LOGNAME=SIDadm
dbs_ora_tnsname=SID
ORACLE_SID=SID
ERASE=^H
PS1=$HOST:$LOGNAME $PWD $
HOST=hcgwdd3
DIR_LIBRARY=/usr/sap/SID/SYS/exe/run
ORA_NLS10=/oracle/SID/102_64/nls/data
DISPLAY=10.16.10.86:0.0
dbs_ora_schema=SAPR3
SHELL=/bin/sh
SAPDATA_HOME=/oracle/SID
HOME=/home/SIDadm
TERM=hpterm
ORACLE_HOME=/oracle/SID/102_64
PWD=/home/SIDadm
TZ=PST8PDT
dbms_type=ORA
SAPSYSTEMNAME=SID
LINES=52
hcgwdd3:SIDadm /home/SIDadm $ -
DbSl Trace: CONNECT failed with sql error '12518' at IMPORT ABAP
Hi
We are trying to install ECC 6.0 on windows 2008 SP2 and oracle 10.2.0.4. We get an error at IMPORT ABAP phase.
content of import_monitor.java :
java version "1.4.2_26"
Java(TM) Platform, Standard Edition for Business (build 1.4.2_26-b03)
Java HotSpot(TM) 64-Bit Server VM (build 1.4.2_26-b03, mixed mode)
Import Monitor jobs: running 1, waiting 1, completed 26, failed 0, total 28.
Loading of 'SAPSLOAD' import package: ERROR
Import Monitor jobs: running 0, waiting 1, completed 26, failed 1, total 28.
content of SAPSLOAD.log:
E:\usr\sap\UED\SYS\exe\uc\NTAMD64\R3load.exe: START OF LOG: 20100705173108
E:\usr\sap\UED\SYS\exe\uc\NTAMD64\R3load.exe: sccsid @(#) $Id: //bas/701_REL/src/R3ld/R3load/R3ldmain.c#5 $ SAP
E:\usr\sap\UED\SYS\exe\uc\NTAMD64\R3load.exe: version R7.01/V1.4 [UNICODE]
Compiled Feb 24 2009 23:41:07
E:\usr\sap\UED\SYS\exe\uc\NTAMD64\R3load.exe -i SAPSLOAD.cmd -dbcodepage 4103 -l SAPSLOAD.log -stop_on_error
DbSl Trace: OCI-call 'OCIServerAttach' failed with rc=12518
DbSl Trace: CONNECT failed with sql error '12518'
DbSl Trace: OCI-call 'OCIServerAttach' failed with rc=12518
DbSl Trace: CONNECT failed with sql error '12518'
(DB) ERROR: db_connect rc = 256
DbSl Trace: OCI-call 'OCIServerAttach' failed with rc=12518
DbSl Trace: CONNECT failed with sql error '12518'
DbSl Trace: OCI-call 'OCIServerAttach' failed with rc=12518
DbSl Trace: CONNECT failed with sql error '12518'
(DB) ERROR: DbSlErrorMsg rc = 99
E:\usr\sap\UED\SYS\exe\uc\NTAMD64\R3load.exe: job finished with 1 error(s)
E:\usr\sap\UED\SYS\exe\uc\NTAMD64\R3load.exe: END OF LOG: 20100705173108
content of sqlnet.log file:
Fatal NI connect error 12560, connecting to:
(DESCRIPTION=(ADDRESS=(PROTOCOL=BEQ)(PROGRAM=oracle)(ARGV0=oracleUED)(ARGS='(DESCRIPTION=(LOCAL=YES)(ADDRESS=(PROTOCOL=beq)))'))(CONNECT_DATA=(SID=UED)(CID=(PROGRAM=E:\oracle\UED\102\bin\sqlplus.exe)(HOST=U34SSAPUED)(USER=uedadm))))
VERSION INFORMATION:
TNS for 64-bit Windows: Version 10.2.0.4.0 - Production
Oracle Bequeath NT Protocol Adapter for 64-bit Windows: Version 10.2.0.4.0 - Production
Time: 05-JUL-2010 16:19:39
Tracing not turned on.
Tns error struct:
ns main err code: 12560
TNS-12560: TNS:protocol adapter error
ns secondary err code: 0
nt main err code: 530
TNS-00530: Protocol adapter error
nt secondary err code: 2
nt OS err code: 0
Fatal NI connect error 12518, connecting to:
(DESCRIPTION=(ADDRESS=(COMMUNITY=SAP.WORLD)(PROTOCOL=TCP)(HOST=u34ssapued)(PORT=1527))(CONNECT_DATA=(SID=UED)(GLOBAL_NAME=UED.WORLD)(CID=(PROGRAM=E:\usr\sap\UED\SYS\exe\uc\NTAMD64\R3load.exe)(HOST=U34SSAPUED)(USER=uedadm))))
VERSION INFORMATION:
TNS for 64-bit Windows: Version 10.2.0.2.0 - Production
Windows NT TCP/IP NT Protocol Adapter for 64-bit Windows: Version 10.2.0.2.0 - Production
Time: 05-JUL-2010 17:28:38
Tracing not turned on.
Tns error struct:
ns main err code: 12564
TNS-12564: TNS:connection refused
ns secondary err code: 0
nt main err code: 0
nt secondary err code: 0
nt OS err code: 0
Best Regards...,Hi,
TNS-12560: TNS:protocol adapter error
Probably your listener or database is down...
If both are running, just stop the installation and reboot the server.
Then again start listener and database and continue SAP installation with "Continue old installation" option..
Also make sure that below environment variables are set properly...
ORACLE_HOME
ORACLE_SID
DBSID
Regards.
Rajesh Narkhede -
ERROR = CONNECT failed with sql error '1017'
Hi,
we are getting the following error when we run r3trans -dx.It is an windows system.
Here i have attached the trans.log.
4 ETW000 r3trans version 6.14 (release 700 - 16.10.08 - 16:26:00).
4 ETW000 ===============================================
4 ETW000
4 ETW000 date&time : 30.11.2010 - 08:58:12
4 ETW000 control file: <no ctrlfile>
4 ETW000 R3trans was called as follows: r3trans -d
4 ETW000 trace at level 2 opened for a given file pointer
4 ETW000 [dev trc ,00000] Tue Nov 30 08:58:14 2010 0 0.000000
4 ETW000 [dev trc ,00000] db_con_init called 0 0.000000
4 ETW000 [dev trc ,00000] create_con (con_name=R/3) 0 0.000000
4 ETW000 [dev trc ,00000] Loading DB library 'dboraslib.dll' ... 0 0.000000
4 ETW000 [dev trc ,00000] load shared library (dboraslib.dll), hdl 0 3857 0.003857
4 ETW000 [dev trc ,00000] using "E:\usr\sap\TQ1\DVEBMGS10\exe\dboraslib.dll"
4 ETW000 22 0.003879
4 ETW000 [dev trc ,00000] Library 'dboraslib.dll' loaded 9 0.003888
4 ETW000 [dev trc ,00000] function DbSlExpFuns loaded from library dboraslib.dll
4 ETW000 18 0.003906
4 ETW000 [dev trc ,00000] Version of 'dboraslib.dll' is "700.08", patchlevel (0.167)
4 ETW000 143 0.004049
4 ETW000 [dev trc ,00000] function dsql_db_init loaded from library dboraslib.dll
4 ETW000 16 0.004065
4 ETW000 [dev trc ,00000] function dbdd_exp_funs loaded from library dboraslib.dll
4 ETW000 25 0.004090
4 ETW000 [dev trc ,00000] New connection 0 created 18 0.004108
4 ETW000 [dev trc ,00000] 0: name = R/3, con_id = -000000001 state = DISCONNECTED, perm = YES, reco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
4 ETW000 29 0.004137
4 ETW000 [dev trc ,00000] db_con_connect (con_name=R/3) 16 0.004153
4 ETW000 [dev trc ,00000] find_con_by_name found the following connection for reuse:
4 ETW000 15 0.004168
4 ETW000 [dev trc ,00000] 0: name = R/3, con_id = 000000000 state = DISCONNECTED, perm = YES, reco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
4 ETW000 18 0.004186
4 ETW000 [dev trc ,00000] CLIENT_ORACLE_HOME is not set as environment variable or
4 ETW000 DIR_CLIENT_ORAHOME is not set as profile parameter.
4 ETW000 assuming using instant client with unspecified location.
4 ETW000 223 0.004409
4 ETW000 [dev trc ,00000] Oracle Client Version: '10.2.0.2.0' 6714 0.011123
4 ETW000 [dev trc ,00000] -->oci_initialize (con_hdl=0) 23 0.011146
4 ETW000 [dev trc ,00000] Client NLS settings: AMERICAN_AMERICA.WE8DEC 2397 0.013543
4 ETW000 [dev trc ,00000] Logon as OPS$-user to get SAPRP1's password 16 0.013559
4 ETW000 [dev trc ,00000] Connecting as /@TQ1 on connection 0 (nls_hdl 0) ... (dbsl 700 030508)
4 ETW000 22 0.013581
4 ETW000 [dev trc ,00000] Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
4 ETW000 18 0.013599
4 ETW000 [dev trc ,00000] 0 WE8DEC 1 0000000006E6C090 000000000032AFF0 0000000006E7E378
4 ETW000 109 0.013708
4 ETW000 [dev trc ,00000] Allocating service context handle for con_hdl=0 6894 0.020602
4 ETW000 [dev trc ,00000] Allocating server context handle 14 0.020616
4 ETW000 [dev trc ,00000] Attaching to DB Server TQ1 (con_hdl=0,svchp=0000000006E7E238,srvhp=0000000006E80608)
4 ETW000 37 0.020653
4 ETW000 [dev trc ,00000] Assigning server context 0000000006E80608 to service context 0000000006E7E238
4 ETW000 21591 0.042244
4 ETW000 [dev trc ,00000] Allocating user session handle 32 0.042276
4 ETW000 [dev trc ,00000] Starting user session (con_hdl=0,svchp=0000000006E7E238,srvhp=0000000006E80608,usrhp=000000000032B808)
4 ETW000 32 0.042308
4 ETW000 [dboci.c ,00000] *** ERROR => OCI-call 'OCISessionBegin' failed with rc=1017
4 ETW000 34551 0.076859
4 ETW000 [dbsloci. ,00000] *** ERROR => CONNECT failed with sql error '1017'
4 ETW000 23657 0.100516
4 ETW000 [dev trc ,00000] set_ocica() -> OCI or SQL return code 1017 13 0.100529
4 ETW000 [dev trc ,00000] Try to connect with default password 12 0.100541
4 ETW000 [dev trc ,00000] Connecting as SAPRP1/<pwd>@TQ1 on connection 0 (nls_hdl 0) ... (dbsl 700 030508)
4 ETW000 17 0.100558
4 ETW000 [dev trc ,00000] Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
4 ETW000 16 0.100574
4 ETW000 [dev trc ,00000] 0 WE8DEC 1 0000000006E6C090 000000000032AFF0 0000000006E7E378
4 ETW000 18 0.100592
4 ETW000 [dev trc ,00000] Assigning username to user session 000000000032B808
4 ETW000 15 0.100607
4 ETW000 [dev trc ,00000] Assigning password to user session 000000000032B808
4 ETW000 23 0.100630
4 ETW000 [dev trc ,00000] Starting user session (con_hdl=0,svchp=0000000006E7E238,srvhp=0000000006E80608,usrhp=000000000032B808)
4 ETW000 18 0.100648
4 ETW000 [dboci.c ,00000] *** ERROR => OCI-call 'OCISessionBegin' failed with rc=1017
4 ETW000 3281 0.103929
4 ETW000 [dbsloci. ,00000] *** ERROR => CONNECT failed with sql error '1017'
4 ETW000 19 0.103948
4 ETW000 [dev trc ,00000] set_ocica() -> OCI or SQL return code 1017 10 0.103958
4 ETW000 [dblink ,00431] ***LOG BY2=>sql error 1017 performing CON [dblink#5 @ 431]
4 ETW000 10634 0.114592
4 ETW000 [dblink ,00431] ***LOG BY0=>ORA-01017: invalid username/password; logon denied [dblink#5 @ 431]
4 ETW000 17 0.114609
2EETW169 no connect possible: "DBMS = ORACLE --- dbs_ora_tnsname = 'TQ1'"Hi,
LOG BY0=>ORA-01017: invalid username/password; logon denied
You need to change your schema users password using "brconnect"
Try as follow:
1. Login as ora<sid>
2. Use below command to reset SAPRP1 users password
# brconnect -u system -f chpass -o SAPRP1 -p <new password>
If it still doesn't work... just set the password as "sap" (it is default password for schema user)
# brconnect -u system -f chpass -o SAPRP1 -p sap
Hope, it helps you...
Suggestions:
Above thing will help even if OPS$ mechanism is not set correctly...
But it is recommended to create and set permissions for OPS$ user. Else some BRTools function will produce errors...
Relevant notes are already suggested by others...
Please go through it word by word...
Regards.
Rajesh Narkhede -
ERROR = CONNECT failed with sql error '12518'
Hi All,
OS Win 2003 - 32 Bit, Database - Oracle 10.2.0.2 , I am facing this from yesterday, suddenly SAP was done and when i am checking the logs it is not able to connect to the database.
I have checked the services for oracle - service was down, i have started the oracleService<SID> and also i have restarted the listener.. after this when i am trying to start the SAP through MMC again the problem is face.. and also the oracle service is stopped. when i tried starting the database from OS level it was giving me error like
ORA-24324: service handle not initialized
ORA-24323: value not allowed
ORA-03113: end-of-file on communication channel
again the Oracle service is stopped i am not getting why the oracle service is stopping..
dev_w*.log
Thu Apr 09 10:33:50 2009
M calling db_connect ...
C Prepending D:\usr\sap\SID\DVEBMGS01\exe to Path.
C Oracle Client Version: '10.2.0.1.0'
C Client NLS settings: AMERICAN_AMERICA.UTF8
C Logon as OPS$-user to get SAPSR3's password
C Connecting as /@SID on connection 0 (nls_hdl 0) ... (dbsl 700 110706)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 UTF8 1 05C84528 05C89AC4 05C8934C
C Attaching to DB Server SID (con_hdl=0,svchp=05C89298,svrhp=05C9AB64)
C
C Thu Apr 09 10:33:51 2009
C *** ERROR => OCI-call 'OCIServerAttach' failed: rc = 12518
[dboci.c 4172]
C *** ERROR => CONNECT failed with sql error '12518'
[dbsloci.c 10933]
C Try to connect with default password
C Connecting as SAPSR3/<pwd>@SM3 on connection 0 (nls_hdl 0) ... (dbsl 700 110706)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 UTF8 1 05C84528 05C89AC4 05C8934C
C Detaching from DB Server (con_hdl=0,svchp=05C89298,srvhp=05C9AB64)
C Attaching to DB Server SID (con_hdl=0,svchp=05C89298,svrhp=05C9AB64)
C *** ERROR => OCI-call 'OCIServerAttach' failed: rc = 12518
[dboci.c 4172]
C *** ERROR => CONNECT failed with sql error '12518'
[dbsloci.c 10933]
B ***LOG BY2=> sql error 12518 performing CON [dbsh#2 @ 1204] [dbsh 1204 ]
B ***LOG BY0=> ORA-12518: TNS:listener could not hand off client connection [dbsh#2 @ 1204] [dbsh 1204 ]
B ***LOG BY2=> sql error 12518 performing CON [dblink#3 @ 431] [dblink 0431 ]
B ***LOG BY0=> ORA-12518: TNS:listener could not hand off client connection [dblink#3 @ 431] [dblink 0431 ]
M ***LOG R19=> ThInit, db_connect ( DB-Connect 000256) [thxxhead.c 1411]
M in_ThErrHandle: 1
M *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c 10156]
M
M Info for wp 16
M
M stat = 4
M reqtype = 6
M act_reqtype = -1
M rq_info = 0
M tid = -1
M mode = 255
M len = -1
M rq_id = 65535
M rq_source = 255
M last_tid = 0
M last_mode = 0
M semaphore = 0
M act_cs_count = 0
M control_flag = 0
M int_checked_resource(RFC) = 0
M ext_checked_resource(RFC) = 0
M int_checked_resource(HTTP) = 0
M ext_checked_resource(HTTP) = 0
M report = > <
M action = 0
M tab_name = > <
M vm = V-1
M
M *****************************************************************************
M *
M * LOCATION SAP-Server hostname_SM3_01 on host tcs042619 (wp 16)
M * ERROR ThInit: db_connect
M *
M * TIME Thu Apr 09 10:33:51 2009
M * RELEASE 700
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 13
M * MODULE thxxhead.c
M * LINE 10354
M * COUNTER 1
M *
M *****************************************************************************
M
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 720]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 260]
M Entering ThSetStatError
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc16 7988) [dpnttool.c 327]
Any suggestions pls
MaheshHi Rohit,
when i check in the sqlnet.log
Fatal NI connect error 12560, connecting to:
(DESCRIPTION=(ADDRESS=(PROTOCOL=BEQ)(PROGRAM=oracle)(ARGV0=oracleSID)(ARGS='(DESCRIPTION=(LOCAL=YES)(ADDRESS=(PROTOCOL=beq)))'))(CONNECT_DATA=(SID=SID)(CID=(PROGRAM=E:\oracle\SM2\102\bin\sqlplus.exe)(HOST=hostname)(USER=SIDadm))))
VERSION INFORMATION:
TNS for 32-bit Windows: Version 10.2.0.1.0 - Production
Oracle Bequeath NT Protocol Adapter for 32-bit Windows: Version 10.2.0.1.0 - Production
Time: 04-SEP-2007 15:09:30
Tracing not turned on.
Tns error struct:
ns main err code: 12560
TNS-12560: Message 12560 not found; No message file for product=NETWORK, facility=TNS
ns secondary err code: 0
nt main err code: 530
TNS-00530: Message 530 not found; No message file for product=NETWORK, facility=TNS
nt secondary err code: 2
nt OS err code: 0
Fatal NI connect error 12560, connecting to:
(DESCRIPTION=(ADDRESS=(PROTOCOL=BEQ)(PROGRAM=oracle)(ARGV0=oracleSID)(ARGS='(DESCRIPTION=(LOCAL=YES)(ADDRESS=(PROTOCOL=beq)))'))(CONNECT_DATA=(SID=SID)(CID=(PROGRAM=E:\oracle\SID\102\bin\sqlplus.exe)(HOST=hostname)(USER=SIDadm))))
VERSION INFORMATION:
TNS for 32-bit Windows: Version 10.2.0.1.0 - Production
Oracle Bequeath NT Protocol Adapter for 32-bit Windows: Version 10.2.0.1.0 - Production
Time: 08-APR-2009 19:16:32
Tracing not turned on.
Tns error struct:
ns main err code: 12560
TNS-12560: TNS:protocol adapter error
ns secondary err code: 0
nt main err code: 530
TNS-00530: Protocol adapter error
nt secondary err code: 2
nt OS err code: 0
Fatal NI connect error 12560, connecting to:
(DESCRIPTION=(ADDRESS=(PROTOCOL=BEQ)(PROGRAM=oracle)(ARGV0=oracleSID)(ARGS='(DESCRIPTION=(LOCAL=YES)(ADDRESS=(PROTOCOL=beq)))'))(CONNECT_DATA=(SID=SID)(CID=(PROGRAM=E:\oracle\SID\102\bin\sqlplus.exe)(HOST=hostname)(USER=SIDadm))))
VERSION INFORMATION:
TNS for 32-bit Windows: Version 10.2.0.1.0 - Production
Oracle Bequeath NT Protocol Adapter for 32-bit Windows: Version 10.2.0.1.0 - Production
Time: 08-APR-2009 19:16:46
Tracing not turned on.
Tns error struct:
ns main err code: 12560
TNS-12560: TNS:protocol adapter error
ns secondary err code: 0
nt main err code: 530
TNS-00530: Protocol adapter error
nt secondary err code: 2
nt OS err code: 0
Fatal NI connect error 12560, connecting to:
(DESCRIPTION=(ADDRESS=(PROTOCOL=BEQ)(PROGRAM=oracle)(ARGV0=oracleSID)(ARGS='(DESCRIPTION=(LOCAL=YES)(ADDRESS=(PROTOCOL=beq)))'))(CONNECT_DATA=(SID=SID)(CID=(PROGRAM=E:\oracle\SID\102\bin\sqlplus.exe)(HOST=hostname)(USER=SIDadm))))
VERSION INFORMATION:
TNS for 32-bit Windows: Version 10.2.0.1.0 - Production
Oracle Bequeath NT Protocol Adapter for 32-bit Windows: Version 10.2.0.1.0 - Production
Time: 08-APR-2009 19:19:27
Tracing not turned on.
Tns error struct:
ns main err code: 12560
TNS-12560: TNS:protocol adapter error
ns secondary err code: 0
nt main err code: 530
TNS-00530: Protocol adapter error
nt secondary err code: 2
nt OS err code: 0
Fatal NI connect error 12560, connecting to:
(DESCRIPTION=(ADDRESS=(PROTOCOL=BEQ)(PROGRAM=oracle)(ARGV0=oracleSID)(ARGS='(DESCRIPTION=(LOCAL=YES)(ADDRESS=(PROTOCOL=beq)))'))(CONNECT_DATA=(SID=SID)(CID=(PROGRAM=E:\oracle\SID\102\bin\sqlplus.exe)(HOST=hostname)(USER=SIDadm))))
VERSION INFORMATION:
TNS for 32-bit Windows: Version 10.2.0.1.0 - Production
Oracle Bequeath NT Protocol Adapter for 32-bit Windows: Version 10.2.0.1.0 - Production
Time: 08-APR-2009 19:19:28
Tracing not turned on.
Tns error struct:
ns main err code: 12560
TNS-12560: TNS:protocol adapter error
ns secondary err code: 0
nt main err code: 530
TNS-00530: Protocol adapter error
nt secondary err code: 2
nt OS err code: 0
Fatal NI connect error 12560, connecting to:
(DESCRIPTION=(ADDRESS=(PROTOCOL=BEQ)(PROGRAM=oracle)(ARGV0=oracleSID)(ARGS='(DESCRIPTION=(LOCAL=YES)(ADDRESS=(PROTOCOL=beq)))'))(CONNECT_DATA=(SID=SID)(CID=(PROGRAM=E:\oracle\SID\102\bin\sqlplus.exe)(HOST=hostname)(USER=SIDadm))))
VERSION INFORMATION:
TNS for 32-bit Windows: Version 10.2.0.1.0 - Production
Oracle Bequeath NT Protocol Adapter for 32-bit Windows: Version 10.2.0.1.0 - Production
Time: 08-APR-2009 19:19:29
Tracing not turned on.
Tns error struct:
ns main err code: 12560
TNS-12560: TNS:protocol adapter error
ns secondary err code: 0
nt main err code: 530
TNS-00530: Protocol adapter error
nt secondary err code: 2
nt OS err code: 0
Fatal NI connect error 12560, connecting to:
(DESCRIPTION=(ADDRESS=(PROTOCOL=BEQ)(PROGRAM=oracle)(ARGV0=oracleSID)(ARGS='(DESCRIPTION=(LOCAL=YES)(ADDRESS=(PROTOCOL=beq)))'))(CONNECT_DATA=(SID=SID)(CID=(PROGRAM=E:\oracle\SID\102\bin\sqlplus.exe)(HOST=hostname)(USER=SIDadm))))
VERSION INFORMATION:
TNS for 32-bit Windows: Version 10.2.0.1.0 - Production
Oracle Bequeath NT Protocol Adapter for 32-bit Windows: Version 10.2.0.1.0 - Production
Time: 08-APR-2009 19:26:38
Tracing not turned on.
Tns error struct:
ns main err code: 12560
TNS-12560: TNS:protocol adapter error
ns secondary err code: 0
nt main err code: 530
TNS-00530: Protocol adapter error
nt secondary err code: 2
nt OS err code: 0
Fatal NI connect error 12518, connecting to:
(DESCRIPTION=(ADDRESS=(COMMUNITY=SAP.WORLD)(PROTOCOL=TCP)(HOST=hostname)(PORT=1527))(CONNECT_DATA=(SID=SID)(GLOBAL_NAME=SID.WORLD)(CID=(PROGRAM=D:\usr\sap\SID\SYS\exe\uc\NTI386\R3trans.exe)(HOST=hostname)(USER=SIDadm))))
VERSION INFORMATION:
TNS for 32-bit Windows: Version 10.2.0.1.0 - Production
Windows NT TCP/IP NT Protocol Adapter for 32-bit Windows: Version 10.2.0.1.0 - Production
Time: 08-APR-2009 20:35:23
Tracing not turned on.
Tns error struct:
ns main err code: 12564
TNS-12564: TNS:connection refused
ns secondary err code: 0
nt main err code: 0
nt secondary err code: 0
nt OS err code: 0
Fatal NI connect error 12518, connecting to:
(DESCRIPTION=(ADDRESS=(COMMUNITY=SAP.WORLD)(PROTOCOL=TCP)(HOST=hostname)(PORT=1527))(CONNECT_DATA=(SID=SID)(GLOBAL_NAME=SID.WORLD)(CID=(PROGRAM=D:\usr\sap\SID\SYS\exe\uc\NTI386\R3trans.exe)(HOST=hostname)(USER=SIDadm))))
VERSION INFORMATION:
TNS for 32-bit Windows: Version 10.2.0.1.0 - Production
Windows NT TCP/IP NT Protocol Adapter for 32-bit Windows: Version 10.2.0.1.0 - Production
Time: 08-APR-2009 20:35:23
Tracing not turned on.
Tns error struct:
ns main err code: 12564
TNS-12564: TNS:connection refused
ns secondary err code: 0
nt main err code: 0
nt secondary err code: 0
nt OS err code: 0
Fatal NI connect error 12560, connecting to:
(DESCRIPTION=(ADDRESS=(PROTOCOL=BEQ)(PROGRAM=oracle)(ARGV0=oracleSID)(ARGS='(DESCRIPTION=(LOCAL=YES)(ADDRESS=(PROTOCOL=beq)))'))(CONNECT_DATA=(SID=SID)(CID=(PROGRAM=E:\oracle\SID\102\bin\sqlplus.exe)(HOST=hostname)(USER=SIDadm))))
VERSION INFORMATION:
TNS for 32-bit Windows: Version 10.2.0.1.0 - Production
Oracle Bequeath NT Protocol Adapter for 32-bit Windows: Version 10.2.0.1.0 - Production
Time: 09-APR-2009 09:15:43
Tracing not turned on.
Tns error struct:
ns main err code: 12560
TNS-12560: TNS:protocol adapter error
ns secondary err code: 0
nt main err code: 530
TNS-00530: Protocol adapter error
nt secondary err code: 2
nt OS err code: 0
Fatal NI connect error 12560, connecting to:
(DESCRIPTION=(ADDRESS=(PROTOCOL=BEQ)(PROGRAM=oracle)(ARGV0=oracleSID)(ARGS='(DESCRIPTION=(LOCAL=YES)(ADDRESS=(PROTOCOL=beq)))'))(CONNECT_DATA=(SID=SID)(CID=(PROGRAM=E:\oracle\SID\102\bin\sqlplus.exe)(HOST=hostname)(USER=SIDadm))))
VERSION INFORMATION:
TNS for 32-bit Windows: Version 10.2.0.1.0 - Production
Oracle Bequeath NT Protocol Adapter for 32-bit Windows: Version 10.2.0.1.0 - Production
Time: 09-APR-2009 09:17:28
Tracing not turned on.
Tns error struct:
ns main err code: 12560
TNS-12560: TNS:protocol adapter error
ns secondary err code: 0
nt main err code: 530
TNS-00530: Protocol adapter error
nt secondary err code: 2
nt OS err code: 0
This error occured when the oracle service was not started..
Mahesh.. -
Trans.log file showing 'ERROR = CONNECT failed with sql error 12541'
Dear All
We have upgraded our datatabse from Oracle 9.2.0.8 to Oracel 10.2.0.4 on our ECC 5.0 IS-AFS SAP system. When we check version from SQL, it's showing 10.2.0.4. That means database is successfully upgraded. Now, when we login through our <SID>adm user and checking R3trans -d, it is showing
'This is R3trans version 6.13 (release 640 - 07.01.08 - 14:25:00).
unicode enabled version
2EETW169 no connect possible: "DBMS = ORACLE --- dbs_ora_tnsname = 'V
AP'"
R3trans finished (0012).'
In the trans.log file it is showing,
4 ETW000 R3trans version 6.13 (release 640 - 07.01.08 - 14:25:00).
4 ETW000 unicode enabled version
4 ETW000 ===============================================
4 ETW000
4 ETW000 date&time : 22.06.2009 - 11:56:40
4 ETW000 control file: <no ctrlfile>
4 ETW000 R3trans was called as follows: R3trans -d
4 ETW000 trace at level 2 opened for a given file pointer
4 ETW000 [dev trc ,00000] Mon Jun 22 11:56:40 2009 110 0.000
110
4 ETW000 [dev trc ,00000] db_con_init called 27 0.000
137
4 ETW000 [dev trc ,00000] create_con (con_name=R/3) 62 0.000
199
4 ETW000 [dev trc ,00000] Loading DB library '/usr/sap/VAP/SYS/exe/run/dboraslib.o' ...
4 ETW000 77 0.000
276
4 ETW000 [dev trc ,00000] load shared library (/usr/sap/VAP/SYS/exe/run/dboraslib.o), hdl
0
4 ETW000 8142 0.008
418
4 ETW000 [dev trc ,00000] Library '/usr/sap/VAP/SYS/exe/run/dboraslib.o' loaded
4 ETW000 43 0.008
461
4 ETW000 [dev trc ,00000] function DbSlExpFuns loaded from library /usr/sap/VAP/SYS/exe/r
un/dboraslib.o
4 ETW000 61 0.008
522
4 ETW000 [dev trc ,00000] Version of '/usr/sap/VAP/SYS/exe/run/dboraslib.o' is "640.00",
patchlevel (0.276)
4 ETW000 421 0.008
943
4 ETW000 [dev trc ,00000] function dsql_db_init loaded from library /usr/sap/VAP/SYS/exe/
run/dboraslib.o
4 ETW000 46 0.008
989
4 ETW000 [dev trc ,00000] function dbdd_exp_funs loaded from library /usr/sap/VAP/SYS/exe
/run/dboraslib.o
4 ETW000 75 0.009
064
4 ETW000 [dev trc ,00000] New connection 0 created 48 0.009
112
4 ETW000 [dev trc ,00000] 0: name = R/3, con_id = -000000001 state = DISCONNECTED, perm =
YES, reco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
4 ETW000 53 0.009
165
4 ETW000 [dev trc ,00000] db_con_connect (con_name=R/3) 55 0.009
220
4 ETW000 [dev trc ,00000] find_con_by_name found the following connection for reuse:
4 ETW000 53 0.009
273
4 ETW000 [dev trc ,00000] 0: name = R/3, con_id = 000000000 state = DISCONNECTED, perm =
YES, reco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
4 ETW000 49 0.009
322
4 ETW000 [dev trc ,00000] Got ORACLE_HOME=/oracle/VAP/102_64 from environment
4 ETW000 521 0.009
843
4 ETW000 [dev trc ,00000] -->oci_initialize (con_hdl=0) 84 0.009
927
4 ETW000 [dev trc ,00000] got NLS_LANG='AMERICAN_AMERICA.UTF8' from environment
4 ETW000 65 0.009
992
4 ETW000 [dev trc ,00000] Client NLS settings: AMERICAN_AMERICA.UTF8 2033 0.012
025
4 ETW000 [dev trc ,00000] Logon as OPS$-user to get SAPVAP's password 49 0.012
074
4 ETW000 [dev trc ,00000] Connecting as /@VAP on connection 0 (nls_hdl 0) ... (dbsl 640 1
80309)
4 ETW000 57 0.012
131
4 ETW000 [dev trc ,00000] Nls CharacterSet NationalCharSet C
EnvHp ErrHp ErrHpBatch
4 ETW000 49 0.012
180
4 ETW000 [dev trc ,00000] 0 UTF8 1
0x1113a4400 0x1113b6b00 0x1113b63b8
4 ETW000 58 0.012
238
4 ETW000 [dev trc ,00000] Allocating service context handle for con_hdl=0 48 0.012
286
4 ETW000 [dev trc ,00000] Allocating server context handle 42 0.012
328
4 ETW000 [dev trc ,00000] Attaching to DB Server VAP (con_hdl=0,svchp=0x1113b97d8,srvhp=0
x1113b99f8)
4 ETW000 95 0.012
423
4 ETW000 [dboci.c ,00000] *** ERROR => OCI-call 'OCIServerAttach' failed: rc = 12541
4 ETW000 4556 0.016
979
4 ETW000 [dbsloci. ,00000] *** ERROR => CONNECT failed with sql error 12541.
4 ETW000 59 0.017
038
4 ETW000 [dev trc ,00000] set_ocica() -> OCI or SQL return code 12541 39 0.017
077
4 ETW000 [dev trc ,00000] Try to connect with default password 184 0.017
261
4 ETW000 [dev trc ,00000] Connecting as SAPVAP/<pwd>@VAP on connection 0 (nls_hdl 0) ...
(dbsl 640 180309)
4 ETW000 46 0.017
307
4 ETW000 [dev trc ,00000] Nls CharacterSet NationalCharSet C
EnvHp ErrHp ErrHpBatch
4 ETW000 48 0.017
355
4 ETW000 [dev trc ,00000] 0 UTF8 1
0x1113a4400 0x1113b6b00 0x1113b63b8
4 ETW000 48 0.017
403
4 ETW000 [dev trc ,00000] server_detach(con_hdl=0,stale=0,svrhp=0x1113b99f8)
4 ETW000 54 0.017
457
4 ETW000 [dev trc ,00000] Detaching from DB Server (con_hdl=0,svchp=0x1113b97d8,srvhp=0x1
113b99f8)
4 ETW000 54 0.017
511
4 ETW000 [dev trc ,00000] Deallocating server context handle 0x1113b99f8 42 0.017
553
4 ETW000 [dev trc ,00000] Allocating server context handle 33 0.017
586
4 ETW000 [dev trc ,00000] Attaching to DB Server VAP (con_hdl=0,svchp=0x1113b97d8,srvhp=0
x1113b99f8)
4 ETW000 54 0.017
640
4 ETW000 [dboci.c ,00000] *** ERROR => OCI-call 'OCIServerAttach' failed: rc = 12541
4 ETW000 2547 0.020
187
4 ETW000 [dbsloci. ,00000] *** ERROR => CONNECT failed with sql error 12541.
4 ETW000 45 0.020
232
4 ETW000 [dev trc ,00000] set_ocica() -> OCI or SQL return code 12541 28 0.020
260
4 ETW000 [dblink ,00428] ***LOG BY2=>sql error 12541 performing CON [dblink#3 @ 428]
4 ETW000 220 0.020
480
4 ETW000 [dblink ,00428] ***LOG BY0=>ORA-12541: TNS:no listener [dblink#3 @ 428]
4 ETW000 42 0.020
522
2EETW169 no connect possible: "DBMS = ORACLE --- dbs_ora_tnsname = 'V
AP'"
Checked the listener service. It is already started and status is OK. Please help.
Regards
Shashank ShekharHi
Yes, I am trying it with orasid user also. There in trans.log file it is showing:
'4 ETW000 R3trans version 6.13 (release 640 - 07.01.08 - 14:25:00).
4 ETW000 unicode enabled version
4 ETW000 ===============================================
4 ETW000
4 ETW000 date&time : 22.06.2009 - 15:54:42
4 ETW000 control file: <no ctrlfile>
4 ETW000 R3trans was called as follows: R3trans -d
4 ETW000 trace at level 2 opened for a given file pointer
4 ETW000 [dev trc ,00000] Mon Jun 22 15:54:42 2009 109 0.000
109
4 ETW000 [dev trc ,00000] db_con_init called 27 0.000
136
4 ETW000 [dev trc ,00000] create_con (con_name=R/3) 61 0.000
197
4 ETW000 [dev trc ,00000] Loading DB library '/usr/sap/VAP/SYS/exe/run/dboraslib.o' ...
4 ETW000 79 0.000
276
4 ETW000 [dev trc ,00000] load shared library (/usr/sap/VAP/SYS/exe/run/dboraslib.o), hdl
0
4 ETW000 8174 0.008
450
4 ETW000 [dev trc ,00000] Library '/usr/sap/VAP/SYS/exe/run/dboraslib.o' loaded
4 ETW000 43 0.008
493
4 ETW000 [dev trc ,00000] function DbSlExpFuns loaded from library /usr/sap/VAP/SYS/exe/r
un/dboraslib.o
4 ETW000 61 0.008
554
4 ETW000 [dev trc ,00000] Version of '/usr/sap/VAP/SYS/exe/run/dboraslib.o' is "640.00",
patchlevel (0.276)
4 ETW000 430 0.008
984
4 ETW000 [dev trc ,00000] function dsql_db_init loaded from library /usr/sap/VAP/SYS/exe/
run/dboraslib.o
4 ETW000 46 0.009
030
4 ETW000 [dev trc ,00000] function dbdd_exp_funs loaded from library /usr/sap/VAP/SYS/exe
/run/dboraslib.o
4 ETW000 76 0.009
106
4 ETW000 [dev trc ,00000] New connection 0 created 48 0.009
154
4 ETW000 [dev trc ,00000] 0: name = R/3, con_id = -000000001 state = DISCONNECTED, perm =
YES, reco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
4 ETW000 53 0.009
207
4 ETW000 [dev trc ,00000] db_con_connect (con_name=R/3) 57 0.009
264
4 ETW000 [dev trc ,00000] find_con_by_name found the following connection for reuse:
4 ETW000 54 0.009
318
4 ETW000 [dev trc ,00000] 0: name = R/3, con_id = 000000000 state = DISCONNECTED, perm =
YES, reco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
4 ETW000 49 0.009
367
4 ETW000 [dev trc ,00000] Got ORACLE_HOME=/oracle/VAP/102_64 from environment
4 ETW000 526 0.009
893
4 ETW000 [dev trc ,00000] -->oci_initialize (con_hdl=0) 84 0.009
977
4 ETW000 [dev trc ,00000] got NLS_LANG='AMERICAN_AMERICA.UTF8' from environment
4 ETW000 64 0.010
041
4 ETW000 [dboci.c ,00000] *** ERROR => OCI-call 'OCIEnvCreate(mode=16384)' failed: rc = -
1
4 ETW000 1464 0.011
505
4 ETW000 [dev trc ,00000] set_ocica() -> OCI or SQL return code -1 40 0.011
545
4 ETW000 [dboci.c ,00000] *** ERROR => OCI-call 'OCIErrorGet' failed: rc = -2
4 ETW000 58 0.011
603
4 ETW000 [dblink ,00428] ***LOG BY2=>sql error -1 performing CON [dblink#3 @ 428]
4 ETW000 74 0.011
677
4 ETW000 [dblink ,00428] ***LOG BY0=>Cannot get Oracle error text. [dblink#3 @ 428]
4 ETW000 55 0.011
732
2EETW169 no connect possible: "DBMS = ORACLE --- dbs_ora_tnsname = 'V
AP'"
Someone suggested 'The solution is to download the new oracle client dll into the kernel'. Can anyone tell from where i can get the client dll for the kernel.
Regards
Shashank Shekhar -
Connect failed with sql error 1004
Hi ,
I am getting an error while starting the SAP.
error in DEV_W0 file :
CONNECT failed with sql error 1004
OCI-call 'OCIsessionBeging failed RC = 1017
Can some one help me with this.
Thanks in advance.
KiranHello Kiran,
Can you post full contents of dev_w0 logs,there must be a ora error also written there.?
What I assume is there is a problem with op$ or sapr3 user while connecting to oracle
If that is the case refer to note 400241,you will find the solution
Rohit -
DbSl Trace: CONNECT failed with sql error '12170'
Hi,
I'm having this problem during installation of DB instance. I already installed Oracle patchSet. Could you some tell me what could be the issue.
SAP Release: NW 2004s SR1
SAP Variant: ABAP
OS: Solaris 10 64 Bit
Oracle: 102_64
INFO 2006-11-16 11:32:19
CJSlibModule::writeInfo_impl()
Output of /usr/sap/RED/SYS/exe/run/R3load -testconnect is written to the logfile R3load.exe.log.
WARNING 2006-11-16 11:47:19
CJSlibModule::writeWarning_impl()
Execution of the command "/usr/sap/RED/SYS/exe/run/R3load -testconnect" finished with return code 2. Output:
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
/usr/sap/RED/SYS/exe/run/R3load: START OF LOG: 20061116113220
/usr/sap/RED/SYS/exe/run/R3load: sccsid @(#) $Id: //bas/700_REL/src/R3ld/R3load/R3ldmain.c#6 $ SAP
/usr/sap/RED/SYS/exe/run/R3load: version R7.00/V1.4 [UNICODE]
Compiled Apr 1 2006 03:18:31
/usr/sap/RED/SYS/exe/run/R3load -testconnect
DbSl Trace: OCI-call 'OCIServerAttach' failed: rc = 12170
DbSl Trace: CONNECT failed with sql error '12170'
DbSl Trace: OCI-call 'OCIServerAttach' failed: rc = 12170
DbSl Trace: CONNECT failed with sql error '12170'
(DB) ERROR: db_connect rc = 256
DbSl Trace: OCI-call 'OCIServerAttach' failed: rc = 12170
DbSl Trace: CONNECT failed with sql error '12170'
DbSl Trace: OCI-call 'OCIServerAttach' failed: rc = 12170
DbSl Trace: CONNECT failed with sql error '12170'
(DB) ERROR: DbSlErrorMsg rc = 99
/usr/sap/RED/SYS/exe/run/R3load: job finished with 1 error(s)
/usr/sap/RED/SYS/exe/run/R3load: END OF LOG: 20061116114718
ERROR 2006-11-16 11:47:19
CJSlibModule::writeError_impl()
CJS-30023 Process call '/usr/sap/RED/SYS/exe/run/R3load -testconnect' exits with error code 2. For details see log file(s) R3load.exe.log.
ERROR 2006-11-16 11:47:19 [iaxxgenimp.cpp:736]
showDialog()
FCO-00011 The step testDatabaseConnection with step key |NW_ABAP_DB|ind|ind|ind|ind|0|0|NW_CreateDBandLoad|ind|ind|ind|ind|8|0|NW_ABAP_Import_Dialog|ind|ind|ind|ind|5|0|NW_ABAP_Import|ind|ind|ind|ind|0|0|testDatabaseConnection was executed with status ERROR .
Thanks
TorpedoHi ram
Just brief ur Env please ..
If you are receiving the ora-12535 error from tnsping as well as sqlplus, the client box is probably unable to find the listener for whatever reason. If the listener is definitely running and you are able to ping the listener's address from the client box but still can't tnsping it, you are probably running into a firewall issue.
The reason for this is that with tnsping failing you are probably timing out before the connection gets to the listener. You can verify that the listener is running by checking the status in lsnrctl or doing a loopback connection through it. You can verify that the listener's address is visible to the remote box by pinging it from the remote box. Firewalls generally filter by port number so this is the next logical thing to check. If the remote connection passes through a firewall and the listener's port has not been opened up you will see this error.
regards
Vinod -
Hi gurues, I'm facing this issue with an IDES on MaxDB with Windows.
System was up and running until someone tries to make an upgrade of the kernel. Since then we can not start our system. we tried to rollback kernel release to the previous one but it didn't work.
When we start our system from MMC console we can see all process in green but work processes are in RUN state and after a few minutes they goes down with the following error
trc file: "dev_w0", trc level: 1, release: "701"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, MJ
B
B Mon May 16 23:57:31 2011
B create_con (con_name=R/3)
B Loading DB library '
sirillium1\sapmnt\SED\SYS\exe\uc\NTAMD64\dbsdbslib.dll' ...
B Library '
sirillium1\sapmnt\SED\SYS\exe\uc\NTAMD64\dbsdbslib.dll' loaded
B Version of '
sirillium1\sapmnt\SED\SYS\exe\uc\NTAMD64\dbsdbslib.dll' is "700.08", patchlevel (0.24)
B New connection 0 created
M sysno 00
M sid SED
M systemid 562 (PC with Windows NT)
M relno 7010
M patchlevel 0
M patchno 32
M intno 20020600
M make: multithreaded, Unicode, 64 bit, optimized
M pid 212
M
M kernel runs with dp version 241000(ext=110000) (@(#) DPLIB-INT-VERSION-241000-UC)
M length of sys_adm_ext is 576 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 212) [dpxxdisp.c 1348]
I MtxInit: 30000 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
M DpShMCreate: sizeof(wp_adm) 22784 (1752)
M DpShMCreate: sizeof(tm_adm) 5912704 (29416)
M DpShMCreate: sizeof(wp_ca_adm) 24064 (80)
M DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
M DpCommTableSize: max/headSize/ftSize/tableSize=500/16/552064/552080
M DpShMCreate: sizeof(comm_adm) 552080 (1088)
M DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
M DpShMCreate: sizeof(slock_adm) 0 (104)
M DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
M DpShMCreate: sizeof(file_adm) 0 (72)
M DpShMCreate: sizeof(vmc_adm) 0 (1864)
M DpShMCreate: sizeof(wall_adm) (41664/36752/64/192)
M DpShMCreate: sizeof(gw_adm) 48
M DpShMCreate: SHM_DP_ADM_KEY (addr: 000000000B2C0050, size: 6607136)
M DpShMCreate: allocated sys_adm at 000000000B2C0050
M DpShMCreate: allocated wp_adm at 000000000B2C2270
M DpShMCreate: allocated tm_adm_list at 000000000B2C7B70
M DpShMCreate: allocated tm_adm at 000000000B2C7BD0
M DpShMCreate: allocated wp_ca_adm at 000000000B86B450
M DpShMCreate: allocated appc_ca_adm at 000000000B871250
M DpShMCreate: allocated comm_adm at 000000000B873190
M DpShMCreate: system runs without slock table
M DpShMCreate: system runs without file table
M DpShMCreate: allocated vmc_adm_list at 000000000B8F9E20
M DpShMCreate: allocated gw_adm at 000000000B8F9EA0
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 000000000B8F9ED0
M DpShMCreate: allocated wall_adm at 000000000B8F9EE0
M
M Mon May 16 23:57:32 2011
M rdisp/queue_size_check_value : -> off
M ThTaskStatus: rdisp/reset_online_during_debug 0
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation view
X <EsNT> Using memory model view.
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
M ThInit: running on host sirillium1
M
M Mon May 16 23:57:33 2011
M calling db_connect ...
C
C DBSDBSLIB : version 700.08, patch 0.024 (Make PL 0.32)
C MAXDB shared library (dbsdbslib) patchlevels (last 10)
C (0.024) Default value for max. input variables is 2000 (note 655018)
C (0.024) Profile parameter to define max. input variables (note 655018)
C (0.024) Switch SQLMODE after CREATE INDEX SERIAL (note 1267841)
C (0.024) Input parameters for SQL statements increased (note 655018)
C (0.018) Create index serial for MaxDB 7.6 (note 1267841)
C (0.018) More trace in case of packed to string conversion error (note 1262799)
C (0.016) R3trans export aborts with signal 6 (note 1262245)
C (0.009) IA64 alignment errors (note 1245982)
C (0.007) Support DB-Type 'SAP DB' by UPDSTAT (note 1225668)
C
C
C Loading SQLDBC client runtime ...
C SQLDBC SDK Version : SQLDBC.H 7.6.0 BUILD 007-123-091-175
C SQLDBC Library Version : libSQLDBC 7.6.5 BUILD 015-123-202-938
C SQLDBC client runtime is MaxDB 7.6.5.015 CL 202938
C SQLDBC supports new DECIMAL interface : 0
C SQLDBC supports VARIABLE INPUT data : 1
C SQLDBC supports keepAlive indicator : 0
C INFO : SQLOPT= -I 0 -t 0 -S SAPR3
C Try to connect (DEFAULT) on connection 0 ...
C *** ERROR => Connect to database failed, rc = -10709 (Connection failed (RTE:Database name is missing))
[dbsdbsql.cpp 137]
B ***LOG BV3=> severe db error -10709 ; work process is stopped [dbsh#2 @ 1203] [dbsh 1203 ]
B ***LOG BY2=> sql error -10709 performing CON [dblink#3 @ 431] [dblink 0431 ]
B ***LOG BY0=> Connection failed (RTE:Database name is missing) [dblink#3 @ 431] [dblink 0431 ]
M ***LOG R19=> ThInit, db_connect ( DB-Connect 000256) [thxxhead.c 1449]
M in_ThErrHandle: 1
M *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c 10563]
M
M Info for wp 0
M
M pid = 212
M severity = 0
M status = 0
M stat = WP_RUN
M waiting_for = NO_WAITING
M reqtype = DP_RQ_DIAWP
M act_reqtype = NO_REQTYPE
M rq_info = 0
M tid = -1
M mode = 255
M len = -1
M rq_id = 65535
M rq_source =
M last_tid = 0
M last_mode = 0
M semaphore = 0
M act_cs_count = 0
M csTrack = 0
M csTrackRwExcl = 0
M csTrackRwShrd = 0
M mode_cleaned_counter = 0
M control_flag = 0
M int_checked_resource(RFC) = 0
M ext_checked_resource(RFC) = 0
M int_checked_resource(HTTP) = 0
M ext_checked_resource(HTTP) = 0
M report = > <
M action = 0
M tab_name = > <
M attachedVm = no VM
M
M *****************************************************************************
M *
M * LOCATION SAP-Server sirillium1_SED_00 on host sirillium1 (wp 0)
M * ERROR ThInit: db_connect
M *
M * TIME Mon May 16 23:57:33 2011
M * RELEASE 701
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 13
M * MODULE thxxhead.c
M * LINE 10783
M * COUNTER 1
M *
M *****************************************************************************
M
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >BtcCallLgCl< for event BEFORE_DUMP
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 723]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 261]
M Entering ThSetStatError
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 212) [dpnttool.c 334]
We check several entries on this SDN site, and look for a lot of notes on the marketplace, and they always are related to default user in xuser files, but our xuser list output is ok. We have a DEFAULT connection to SAPSID user, a DBM connection to CONTROL user and a USERDBA connection.
XUSER Entry 1
Key :DEFAULT
Username :SAPSID
UsernameUCS2:S.A.P.S.E.D. . . . . . . . . . . . . . . . . . . . . . . . . . .
Password :?????????
PasswordUCS2:?????????
Dbname :SID
Nodename :server1
Sqlmode :SAPR3
Cachelimit :-1
Timeout
Isolation
Charset :<unspecified>
XUSER Entry 2
Key :c
Username :CONTROL
UsernameUCS2:C.O.N.T.R.O.L. . . . . . . . . . . . . . . . . . . . . . . . . .
Password :?????????
PasswordUCS2:?????????
Dbname :SID
Nodename :server1
Sqlmode :INTERNAL
Cachelimit :-1
Timeout :-1
Isolation :-1
Charset :<unspecified>
XUSER Entry 3
Key :c_J2EE
Username :CONTROL
UsernameUCS2:C.O.N.T.R.O.L. . . . . . . . . . . . . . . . . . . . . . . . . .
Password :?????????
PasswordUCS2:?????????
Dbname :SID
Nodename :server1
Sqlmode :SAPR3
Cachelimit :-1
Timeout
Isolation
Charset :<unspecified>
XUSER Entry 4
Key :w
Username :SUPERDBA
UsernameUCS2:S.U.P.E.R.D.B.A. . . . . . . . . . . . . . . . . . . . . . . . .
Password :?????????
PasswordUCS2:?????????
Dbname :SID
Nodename :server1
Sqlmode :INTERNAL
Cachelimit :-1
Timeout :-1
Isolation :-1
Charset :<unspecified>
Any idea? we are out of ideas at this moment.
Regards
Edited by: Gustavo Goicochea on May 17, 2011 6:37 PMNatalia, this system was not resored nor copied, it was up and running before kernel update. We did some of the tests you said and someothers, here are some outputs.
We update kernel to release 142
R3trans -d and -x exit with (all with user SIDADM)
SVERS table does exist and belongs to SAPSID
dbmcli on SID>sql_execute select * from domain.tables where tablename='SVERS'
OK
END
'SAPSID';'SAPSID';'SVERS';'';'TABLE';'TABLE';'20100406';'00054637';'20100406';'00054637';'20100406';'00054638';'NO';(null);20000;(null);x'0000000000004842';'NO';'NO';'YES';'NO';(null)
Why it still says that SVERS table does not exist and SQL error 942?
C Now I'm connected to SAP DB
C 00: server1-SID, since=20110518015619, ABAP= <unknown> (0)
B Connection 0 opened (DBSL handle 0)
C *** ERROR => prepare() of C_0000, rc=1, rcSQL=-942 (POS(28) Unknown table name:SVERS) [
dbsdbsql.cpp 1604]
C *** ERROR => SQL PREPARE on connection 0, rc=-942 (POS(28) Unknown table name:SVERS) [dbslsdb.cpp 7253]
C sc_p=000000000CFAECC0,no=0,idc_p=0000000000000000,con=0,act=0,slen=34,smax=256,#vars=0,stmt=0000000002EA0AF0,table=SVERS
C SELECT VERSION INTO ? FROM SVERS ;
B ***LOG BZA=> table SVERS does not exist on database [dblink#4 @ 1301] [dblink 1301 ]
M ***LOG R19=> ThInit, db_connect ( DB-Connect 004096) [thxxhead.c 1515]
M in_ThErrHandle: 1
M *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c 10824]
M
Users seem to be ok
dbmcli on SID>sql_execute SELECT username, usermode FROM users
OK
END
'CONTROL';'ADMIN'
'SUPERDBA';'SYSDBA'
'SAPSID';'DBA'
'SAPR3';'DBA'
User SAPR3 does not have anything on database
dbmcli on SID>sql_execute select * from domain.tables where owner='SAPR3'
ERR
-24988,ERR_SQL: SQL error
100,Row not found
Any idea?
regards -
Hi Experts,
I have an error when I copy Homogeneous in SOLMAN, I do the import of the database and this error occurs:
sapparam: sapargv(argc, argv) has not been called!
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
/usr/sap/SOP/SYS/exe/uc/linuxx86_64/R3load: START OF LOG: 20140407112019
/usr/sap/SOP/SYS/exe/uc/linuxx86_64/R3load: sccsid @(#) $Id: //bas/720_REL/src/R3ld/R3load/R3ldmain.c#21 $ SAP
/usr/sap/SOP/SYS/exe/uc/linuxx86_64/R3load: version R7.20/V1.4 [UNICODE]
Compiled Mar 18 2014 22:40:46
/usr/sap/SOP/SYS/exe/uc/linuxx86_64/R3load -testconnect
(DB) ERROR: db_connect rc = 256
DbSl Trace: CONNECT failed with sql error '-2'
(DB) ERROR: DbSlErrorMsg rc = 99
/usr/sap/SOP/SYS/exe/uc/linuxx86_64/R3load: job finished with 1 error(s)
/usr/sap/SOP/SYS/exe/uc/linuxx86_64/R3load: END OF LOG: 20140407112019
I need help to correct this error.Hi Michal,
Login with ora<SID> and check whether you are able to connect to sqlplus ( do steps as below )
1. sqlplus "/as sysdba"
2. select status from v$instance.
Let us know the ouput of both the command
Thanks
Anil -
*** ERROR = CONNECT failed with SQL error '12154' after Oracle Upgrade
Hello Experts,
Recently I upgraded my oracle database from 11.2.0.3 to 11.2.0.4.The upgrade completed successfully but I am unable to start the instance.
R3trans -d failing with the error--
OCIServerAttach(OCI_DEFAULT) failed with -1=OCI_ERROR
OCIServerAttach(OCI_DEFAULT) failed with SQL error 12154:
ORA-12154: TNS:could not resolve the connect identifier specified
OCIServerAttach(con=0, svc=069C1630): Error 12154 attaching new srv=069C17D0
OCIHandleFree(con=0): Server handle srv=069C17D0 freed.
server_detach(con=0, svc=069C1630; srv=NULL, stale=2)
OCIHandleFree(con=0): Service svc=069C1630 freed (i=1).
*** ERROR => CONNECT failed with SQL error '12154'
-->oci_get_errmsg (con=0, rc=12154)
OCIErrorGet() -> SQL error code: 12154; buflen=66
OCIErrorGet(): error text ->
ORA-12154: TNS:could not resolve the connect identifier specified
ocica() -> SQL error code 12154,12154
DbSlConnect(con=0) -> orc=12154, rc=99=DBSL_ERR_DB
***LOG BY2=>sql error 12154 performing CON
***LOG BY0=>ORA-12154: TNS:could not resolve the connect identifier specified
I have checked listener is up and running properly.Entry is maintained in tnsnames.ora.
Also kernel is upgraded with latest path.Curent kernel version--742
Please suggest on the mentioned error.I am attaching the logs here.Thanks in advance.
Best Regards,
DebadityaHi Debadiya
Kindly check this SAP Notes
1204916 - Error: "ORA-12154" when connecting to Oracle from a Windows 64-bit platform
2153975 - Database connectivity fails with ORA-12154
556232 - Environment settings for R/3/Oracle on Windows
443867 - ORA-12154 Collective SAP note
BR
SS -
CONNECT failed with sql error '1033'
hi everyone,
i started the server,
the process and dispatcher also started then ended .
i saw the log files in that erro has thrown
"CONNECT failed with sql error '1033'"
plz help me
regards
gopiHey Gopi,
Go to usr/sap/<SID>/SYS/exe/run in command prompt
then run R3Trans -d
It will show whether databse is connected to system or not.
If not if it is Windows system then go to MMC and restart the complete instance else if its is UNIX type stopsap check whether dpmon is showing any active work process. Once all work processes are down then startsap.
This restarts whole of Instace along with Database.
Hope this should help you.
Regards
Vivek -
DbSl Trace: CONNECT failed with sql error '12154'
Hi
I am trying to install DB instance , platform -> IBM AIX 5.3 , Database - Oracle 9i, sap version -> 4.7. I am getting error at Database load phase. The listener is started successfully, TNS ping is ok. Host file edited with proper ip address and the hostname, Still the error is same.
DbSl Trace: CONNECT failed with sql error '12154'
I am able to connect to oracle idle instance .
Please help me in solving this issue
Regards
Prasanna.B.SHi,
Good evening and greetings,
Please go through the following OSS Note
Note 324714 - DB connect error in TMS after Oracle upgrade/change
Please reward points if found useful
Thanking you
With kindest regards
Ramesh Padmanabhan
Maybe you are looking for
-
Hot Synch Tungsten E2 to VIsta
I am trying to synch my Tungsten E2 to a Sony laptop running Vista. I have a bluetooth adapter installed. The bluetooth program is asking for a pairing code. Any ideas? Post relates to: Tungsten E2
-
I have a Ipod Nano for 5 years and Saturday I was updating the latest Itunes and when I connect my Ipod to my PC I got a Code 37 error. I uninstalled the new itunes and put back the old itunes but my Ipod is still having the same error. I did the sa
-
What is the exact use of 'Day Balance' and 'Period Balance'??
Hi All, Can any body give me a detail and exact description about 'Day Balance' and 'Period Balance' fields used under 'Base Emtitlement' subtree option of V_T559L. Thanks, Swapnil PS : Points will be rewarded for helpful answers...!
-
DTW freezes or hangs at finish screen
Each time I run DTW to import new transactional data (journal entries), when I get to the final screen, where there is the finish button, DTW hangs and never comes back. I have to end program. When I go and check the system it has imported the data
-
Remove Color Correction Preset?
Being able to save a color correction preset is great (in the sprocket menu in the color board.) But to avoid clutter, and since I'll probably never use the one I just created again after this project, anybody know how to remove them? Is it possible