OCI mode of communication with the oracle server

I would like to know the mechanism used by OCI dll to communicate with the oracle database server. I found that the oracle jdbc thin driver uses java sockets to connect to oracle.
Any idea about the OCI driver?

It uses whatever mechanism is specified in the TNSNAMES.ORA on the client, most commonly this is a TCP/IP connection to port 1521 on the server.

Similar Messages

"An error occurred in the communication with the BW server"

Hi, when I open BEx Analyzer and try to connect to my BW server to run a query, I get this message, "An error occurred in the communication with the BW server".
Can someone help me.
thanks
Pat.

If it's happening consistently, it could be a problem with your local m/cs MS office and/or SAP GUI.
If it was working before:
1) Uninstall SAP GUI and MS office.
2) Install MS Office and SAP GUI...then try to connect to BW.
Good luck, BB

Not all of my photos upload to my website when I publish it. when my site finishes publising I get an error that says, "There was an error communicating with the FTP server. Try again later, or check with your service provider."

Not all of my photos upload to my website when I publish it. when my site finishes publising I get an error that says, "There was an error communicating with the FTP server. Try again later, or check with your service provider."

I am publishing directly to an FTP server (option 1). Is this the optimal method or should I be publishing to a folder and then (how do/would I?) publish to my hosting domain?
I'm wondering if this has really anything to do with the publishing process, or whether it just has to do with the photos and/or the photo albums. I've deleted the photo albums with the missing pictures from my site on iweb thinking a file might be corrupt. (I'm getting the albums from iphoto -- drag/drop method into iweb) I then replaced these albums with the same albums as the previous ones from iphoto and then published my site again -- and the EXACT same photos were once again missing in the NEW albums as were missing in the old albums...
Maybe it is a publishing issue, or it could be a photo/file issue. However, these albums aren't very large -- the largest containing 135 photos --
Please! if you have any suggestions or ideas as to what is happening I would be greatly appreciative!
I'm pulling my hair out here trying to diagnose the problem...

Trying to publsh changes to my website. I get a message "There was an error communicating with the FTP server. Try again later, or check with your service provider." I did, and all my settings are correct, but still cannot publish

Trying to publsh changes to my website. I get a message "There was an error communicating with the FTP server. Try again later, or check with your service provider." I did, and all my settings are correct, but still cannot publish.
Any other ideas?

Most likely you are suffering from a bug in iWeb that doesn't let you publish websites if an image you have added to your site begins with space. You can either search for that image and remove it.
<Link Edited by Host>

Publish error There was an error communicating with the FTP server. Try again later, or check with your service provider.

OK! So I got everything filled out right to publish my iWeb site with iCloud now but after it looks like everything is fine this error pops up REPEATLY!:
PUBLISH ERROR There was an error communicating with the FTP server. Try again later, or check with your service provider.
Is this an Apple problem or with my server Netfirms???

Yeah no sorry not the answer. I have my own online hosting unlimited space and bandwidth.
It seems to be linked to teh podcast image. It's very strange...

An error occurred while communicating with the BI server.

Hi Expert,
A error occured when I finish updating the new patch of the Addon, When I finish updating it, it works okay , but when I reboot the system, it disconnet our server and give the following exception :
An error occurred while communicating with the BI server.
System exception thrown while marshaling .NET type System.Byte[] to RFCTYPE_BYTE.
Are there anyone met such issues?
Please help
Len

Hi,
Are you getting this error while connecting to the Backend through BEx Tools.
Is that system available or System down while connecting.
Rgds,
Murali

An error occurred in the communication with the BW server in BI 7.0

Hi,
When I am trying to access Bex Report from Menu, the following error occurs ´An error occurred in the communication with the BW server'.
I have removed authorization variable from the query and tried, then to error is coming.
Please suggest


Hi
 
Report the problem details to your BASIS Team. They should be able to help you.
 Hope it helps.
 
Cheers
Abhijit
 * It's a good habit to reward someone with points in SDN if you think his/her
response was helpful to you

An error occured while communicating with the web server

hi Experts
Im having a problem with bpc when i try to send data in an input schedule
message error prompt
"an error occured while communicating with the webserver"
Any body encounters this?
Thanks

Hi,
I am from support team, so this is the method how I troubleshoot this kind of issue.
First, I would like to say that this error message in BPC for Excel is a very common error, and it means nothing. Please move on the following steps:
1. Reproduce the issue again.
2. Logon to ABAP side, go to RSA1. Enter OBJECT=UJ* and SUBOBJECT=UJQ.
Note: UJQ means query related. The same, you can use UJD to filter all Data Manager's activity.
3. Under UJQ, you will find the log, which you reproduced in step 1. It must be shown as Red. Double-click it. See what the error message is.
4. Besides the error, right-side, you will see a Details button. Click on it, and another window with MDX Statement will show up.
5. Copy the MDX statement out for next usage.
6. Go to another T-code MDXTEST (this is a test tool for MDX statement).
7. Copy the MDX statement into MDXTEST, and run it. (find the run button at above).
What is the error message?
Based on my experience, if this is a Time out error, related to MDX Paser, you can try note:
1032461 MDX parser does not start
If not, it must be a specific error. Need to check further, accordingly.

An error occured in communication with the BW server.--urgent

Hi all,
Can anybody help me.
i got 1 issue like ,when iam trying to executing query, iam getting the error pop up screen like
'An error occured in communication with BW server'
'Due to this ,the Connection Has To be Closed'.
Detailed Description:
1)No space left in SHARED MEMORY.
2)An exception with the type CX_SY_EXPORT_NO_SHARED_MEMORY occured,but with neither...
3)Program error in class SAPMSSY1 method:UNCAUGHT_EXCEPTION.
Could any body help me,it very urgent....

HI COULD ANYBODY RESPOND TO THIS ISSUE IT VERY URGENT BUDDY'S
PLZ..........

Communication error with the opmn server local port

Working on 64-bit R12.0.6 on AIX 5L
Application services are not being started properly. They are being started with status 2(sometimes with 4).
Autocinfig is being successfully completed.
Please help me how I can get rid of this error. Following are some of the environment setting details:
ons.conf
nodes=appaix02.us.oracle.com:15007
opmn.xml
<opmn xmlns="http://www.oracle.com/ias-instance">
<notification-server>
<port local="15006" remote="15007" request="15005"/>
opmn.log
OPMN worker process exited with status 4. Restarting
OPMN worker process exited with status 4. Restarting
OPMN worker process exited with status 4. Restarting
OPMN worker process exited with status 4. Restarting
OPMN worker process exited with status 4. Restarting
OPMN worker process exited with status 4. Restarting
ons.log
07/01/11 13:12:02 [4] ONS server initiated
07/01/11 13:12:52 [4] Logging disabled
07/01/11 13:12:53 [4] ONS server initiated
07/01/11 13:13:04 [4] Logging disabled
07/01/11 13:13:04 [4] ONS server initiated
07/01/11 13:13:17 [4] Logging disabled
07/01/11 13:13:28 [4] ONS server initiated
07/01/11 13:13:40 [4] Logging disabled
07/01/11 13:13:41 [4] ONS server initiated
07/01/11 13:14:20 [4] Logging disabled
07/01/11 13:14:21 [4] ONS server initiated
07/01/11 13:14:29 [4] Logging disabled
07/01/11 13:14:29 [4] ONS server initiated
07/01/11 13:14:34 [4] Logging disabled
07/01/11 13:14:34 [4] ONS server initiated
07/01/11 13:15:53 [4] Logging disabled
adopmnctl.txt
10/08/10-23:30:43 :: adopmnctl.sh version 120.4.12000000.3
10/08/10-23:30:43 :: adopmnctl.sh: Stopping Oracle Process Manager (OPMN) and t
he managed processes
opmnctl: stopping opmn and all managed processes...
10/09/10-11:13:41 :: adopmnctl.sh version 120.4.12000000.3
10/09/10-11:13:41 :: adopmnctl.sh: Starting Oracle Process Manager (OPMN)
opmnctl: opmn start failed.
10/09/10-11:15:09 :: adopmnctl.sh: exiting with status 2
adformsctl.txt
opmnctl: stopping opmn managed processes...
10/09/10-11:18:11 :: adformsctl.sh version 120.12.12000000.5
10/09/10-11:18:11 :: adformsctl.sh: starting OPMN if it is not running
Communication error with the OPMN server local port.
Check the OPMN log files
Communication error with the OPMN server local port.
Check the OPMN log files
Communication error with the OPMN server local port.
Check the OPMN log files
Communication error with the OPMN server local port.
Check the OPMN log files
Communication error with the OPMN server local port.
Check the OPMN log files
Communication error with the OPMN server local port.
Check the OPMN log files
Communication error with the OPMN server local port.
Check the OPMN log files
Communication error with the OPMN server local port.
Check the OPMN log files
Communication error with the OPMN server local port.
Check the OPMN log files
Communication error with the OPMN server local port.
Check the OPMN log files
Communication error with the OPMN server local port.
Check the OPMN log files
Communication error with the OPMN server local port.
Check the OPMN log files
opmnctl: opmn start failed.
Please help.

"A point to add"
I just noticed that following message is being continously receiving in the database alert_log:
Sat Oct 9 16:04:52 2010
WARNING: inbound connection timed out (ORA-3136)
Sat Oct 9 16:05:32 2010
WARNING: inbound connection timed out (ORA-3136)
Sat Oct 9 16:06:30 2010
WARNING: inbound connection timed out (ORA-3136)
Sat Oct 9 16:07:10 2010
WARNING: inbound connection timed out (ORA-3136)
Sat Oct 9 16:09:35 2010
Incremental checkpoint up to RBA [0x1d.1f9928.0], current log tail at RBA [0x1d.1f9a79.0]
Sat Oct 9 16:11:52 2010
WARNING: inbound connection timed out (ORA-3136)
Sat Oct 9 16:29:40 2010
Incremental checkpoint up to RBA [0x1d.1f9b87.0], current log tail at RBA [0x1d.1f9bf4.0]
~
Please help.

Discoverer Plus associate with the Oracle Application Server Infrastructure

Hi Everyone,
I just install the Oracle BI (v 10.1.2.0.2) into my 2003 server so I could use the Discoverer Plus and Viewer. This is a stand alone BI installation (I guess, I have little knowledge about Discoverer plus or Oracle AS).
My question is how could I connect the Discoverer plus to my ODS database, so I could create report or view report.
and where to find the Oracle Application Server Infrastructure (or How do I know I have the Oracle Application Server Infrastructure?)
I read the Oracle BI Discoverer Configuration Guide, and it tell me to associate the Oracle BI with the Oracle Application Server Infrastructure to deploy the Discoverer. so I went to the BI Application Server Control page, the Infrastructure section, the Identity Management to configure the Internet Directory, so I could I have the public connection, but it didn't work.
Also do I real need the Oracle AS Infrastructure to make the Discoverer Plus work?
Thanks in advance
Kevin C
Kevin
Edited by: cmingl on Feb 11, 2010 1:30 PM

Hi Kevin,
Oracle AS Infrastructure is needed only if you are implementing SSO for Discoverer or using Public connection .
Else only Oracle AS Middle tier is sufficient to work with Discoverer Plus .
Regarding "how could I connect the Discoverer plus to my ODS database, so I could create report or view report"
You need to create the End User Layer (EUL) and then grant privilege to the EUL to users who will be creating the report .
Thanks,
Sutirtha

Safari cannot open the page ~ The error was: "There was a problem communicating with the web proxy server (HTTP)

Help! I was cruzing along just fine and went out tonight only to receive the message above:
Cannot open Page
Safari cannot open the page
The error was: "There was a problem communicating with the web proxy server (HTTP)."
I have had all the Apple iPhone phone. Have never encountered anything like this.
All systems are GO as soon as I log on to wifi.
Can anyone help, please.

I am also fixed. I also loaded Onavo, but that was the other day ... this is what I did with the help of online chat with AT&T ...
I went to:
Settings
Wifi
I selected the network I was working on by hitting the blue arrow located on right side
At the detail page of that network I scolled down to the bottom to find HTTP Proxy boxes
I was on Off and changed it to Auto and it worked!
I was soo jazzed!!
Instructions said if it was already on AUTO, to change it to Manual and make your Port = 80 but I didn't have to do that!
YIPPIE!! I'm a new man!!
Go to settings -----> WI-FI -----> select the network you're using ------> hit the blue arrow located on the right-side of the network name (ie: show details of that network), this takes you to another page.
--------> at the bottom of the page you'll see "HTTP Proxy" boxes (located below the "renew lease" button) ---------------> change the proxy to AUTO. Note: if you're already at AUTO, change it to "Manual" and make your Port = 80.

Getting a "Your network preferences prevent us from communicating with the server" error in dw 5.5

Hello, lately i noticed dw 5.5 can't seem to use browserlab, it says "Your network preferences prevent us from communicating with the server"
I can connect to BC and other ftp servers no problem, I've also turned off my firewall to be sure and it still won;t connect.
The only info I found on this error is a tip on how to turn off browserlab, which in turn gets this error, Not sure why you would wnat to shut the feature off, but no tip to turn it on. The tip on editing the registry doesn;t help because itsyays to change the registry key to 0 and all communication of adobe products will be turned off, however the key does exist and is set to 1, so I can;t even try that tip in reverse to enable, itshould be communication already.
Any help would be appreciated, I am just competinga site and was about to check it in all the browsers, an incredibly useful and time saving feature, but I can't now.
Rich

Phil, the only screenshot I've seen from you is the error message (and I can't seem to view the others you just posted), so apologies if I told you something you'd already tried. We still think there should be a solution to this, it's just that debugging issues this way can be a little difficult, so please bear with us.
At this point our best guess is that there is a registry setting that got changed that is causing the issue for both of you. We have been able to repro the issue on Windows XP by setting the following 32-bit registry entry to 0. The issue was fixed by changing it back to 1. We've also tested on Windows 7 and verified the same thing with the 64-bit registry entry. Apologies if I'm suggesting something that any of you has already tried, but no details were provided about which registry entry you checked or what article you were looking at.
From the CSLive team:
"To my knowledge the only way to get that error message is to disable CSLive in the registry. The Customer does not mention the exact article or reg value that he is looking at in his post but it should be:
For 32-bit systems: HKEY_LOCAL_MACHINE\SOFTWARE\Adobe\AdobeOnlineDefault.
For 64-bit systems: HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Adobe\AdobeOnlineDefault
http://kb2.adobe.com/cps/846/cpsid_84665.html
He should delete the AdobeOnlineDefault entry in the registry and try again. (he may need to stop and restart CS55Services Manager or reboot machine)."
Let us know if this fixes the issue for you or not. As with any change to the registry we recommend you make a backup first and proceed carefully.
Thanks,
Mark

Error on timesheet submission "An error occurred while communicating with the server.

Hello, we have many users who are encountering errors submitting timesheets following our migration to Project Server 2013 (SP1 April 2014 CU). The error is:
An error occurred while communicating with the server. Check connectivity with your administrator to determine whether further action is necessary.
This follows the specific timesheet, if I open a delegate session on my machine, I can reproduce the error. However, simply deleting and recreating the timesheet has resolved it for many users, at least until the next timesheet submission.
Has anyone seen this sort of widespread behavior and have a solution beyond deleting and recreating the given timesheet?
Thanks!

Hello Joncantrell
I just ran into issue and found a way to resolve, though it may not be the best. I think it is a bug, but here is how I fixed it.
1) Delegating as the user
2) Deleted the timesheet
3) Going line by line, I check each task that had a status of "Not Submitted" and "Send Progress for Select Task".
4) The error came up only for one task.
5) Open that schedule, remove resource from task, saved and published.
6) Deleted and recreated timesheet
7) Submitted timesheet and processed normally.
I hope this helps
Cheers!
Michael Wharton, MVP, MBA, PMP, MCT, MCTS, MCSD, MCSE+I, MCDBA
Website http://www.WhartonComputer.com
Blog http://MyProjectExpert.com contains my field notes and SQL queries

Error while communicating with the server

Hi Experts,
I'm having the following issue, when I try to send data using an input schedule the server says that there was an error while communicating with the server and don't send the data, I took a look at the log file and it says the following,
==============[BPC Logging]==============
[Message Type] : ERROR
[Job Name]     : OSoft.Services.Application.FileAccessService.FileAccessServiceProxy
[DateTime]     : 4/6/2011 8:42:44 AM
[UserId]       : CAMESAP\BPC_SYSADMIN
[Message]       : UJF_EXCEPTION E018     Cannot find document/directory 0
==============[BPC Logging End ]==============
Also i went to take a look at the default script logic, because i remember that this error happened to me when i wrongly program an script logic in the default.lgf but it shows me the following error when I open it,
System.InvalidCastExeption: Specified cast is not valid
at System.data.DataColumnCollection.get_Item(String name)
at System.data.DataRow.get_Item(String columnName)
at Osoft.Consumers.Admin.AdminLogicClient50.LogicMain.GetLogic()
If I compile the file, the error stop appearing, put with all new logic files it happens at first, I think that these two errors are very deep related, if anyone can help me will be very appreciated,
Thanks in advanced

Hi,
I have faced the similar kind of problem in BPC NW 7.5 SP5.
The main reason is when you are trying to send any data via input schedule, you will get this web server communication issue.
1) Check if any thing you are calling script logic under default.LGF. Exclude the logic out from default and test it.
2) Process all the dimensions in application
3) Perform Lite optimization and check are there any errors.
4) Finally check BPC COM+ services and check if any service stopped and also check osoft send governer service in microsoft services.
5) Diagnoise usign server manager.
6) Try input some thing in apshell and check if u face the same web server communication error?

OCI mode of communication with the oracle server

Similar Messages

Maybe you are looking for