OCM JEA JEE6?

Hi
I am planning to do the OCM JEA and I have a questions related to it. The current OCM JEA is based on JEE 5, is there any plans for a JEE6 version? Is it comming soon? Should I wait for the JEE6? I would like to do my certification in the next 3 to 4 months. Thanks for your replies and assistance in advance.
Saad.

Hi
Thanks for your response, regarding the training I am planning on doing "Java Programming Language, Java SE 6 (SL-275-SE6)" the self study CD option. How will I need to prove/verify that I did indeed take the training course, when I plan to do my ocm jea exams. Can I have someone else(my employer) purchase the CD for me, or will I have to do all the purchasing and have my employer reimburse. Thanks in advance.
Saad.

Similar Messages

  • How to avoid OCM reinstall through OPatch when using EM Harvester?

    Currently running OEM Grid Control 11g (11.1.0.1.1GC PSU) on an infrastructure repository database (11.2.0.1.2). Previously had OCM installed in every ORACLE_HOME in our environment. I removed all existing OCM installations and OCM Instrumentation in each database.
    I then installed OCM (10.3.3.2.2) into the OMS_HOME in order to begin using the EM Harvester for all configuration uploads rather than multiple OCM installs. This went fine, and I began to see targets in MOS indicating GC as the data source rather than OCM. Good so far.
    I then installed PSU 11.2.0.1.3 to the infrastructure repository database. During the patch installation, OPatch re-installed OCM into the database ORACLE_HOME without my knowledge. This caused some targets to appear in MOS with OCM as the data source again. At this point I had two sets of OCM processes running. I've confirmed that the patch caused the OCM reinstall by checking the opatch logs from $ORACLE_HOME/cfgtoollogs, where I can see the fresh OCM install occur.
    I then installed patch 9431704 to the MW_HOME/oracle_common ORACLE_HOME to resolve the 'FMW Welcome Page Application' target showing down in Grid Control issue. The patch went fine, but OPatch again reinstalled OCM, this time to MW_HOME/oracle_common and MW_HOME/utils. So at this point I had four sets of OCM processes running, which caused many duplicate targets to appear in MOS, again with OCM as the data source. Confirmed yet again that the OPatch session led to the new OCM installs by reviewing the logs.
    I would like to exclusively use the EM Harvester to upload configuration details to MOS. Per the whitepaper in note 848962.1, "The only prerequisites for using an EMGC system to collect and upload configuration data to Oracle Support are that the EMGC OMS must be at least version 10.2.0.5, and there must be an OCM instance configured (and running in connected mode) in the Oracle Home of the OMS."
    So this leads to my question. How can I continue to patch OMS, the repository database, and the target databases, while preventing OPatch from reinstalling OCM in every ORACLE_HOME it finds?
    I understand that whitepaper's comment to mean that I only require OCM in the OMS_HOME and it should not run out of any other ORACLE_HOMEs in our environment. Should I simply allow OPatch to install OCM anywhere it wants, then pause them by running '$ORACLE_HOME/ccr/bin/emCCR hold'? Is there a flag I can include when running 'opatch apply' to tell it skip OCM installation?

    Thanks EricvdS, I think that will work. I plan to try it with my next PSU patch. It's not exactly what I wanted, since I'd prefer to avoid having OPatch installed at all (and thus have no ORACLE_OCM user and no OCM instrumentation in the database), and I believe the initial OPatch install will submit OCM data to MOS even before pausing it and setting it to disconnected mode, and I'd like to avoid that too.
    I also have the feeling that I may be able to skip the OPatch install by not providing my email address and MOS password or CSI number when applying patches. I'll try that too.

  • EBS 12.1.3 & OCM: few questions

    Hi,
    I would need some clarification when using Oracle Configuration Manager (OCM) with EBS 12.1.3. I have multi-node (app node + db node in separate servers) EBS 12.1.3 environment where I've configured OCM as follows.
    Installed OCM (setupCCR) and executed the following scripts in DB node:
    $ORACLE_HOME/ccr/admin/scripts/installCCRSQL.sh collectconfig -s <SID> -r system
    $ORACLE_HOME/ccr/admin/scripts/installCCRSQL.sh ebs_collectconfig -u apps -w <apps password>
    In app node, I've installed (setupCCR) OCM under $ORACLE_HOME (10.1.2).
    Is this correct?
    In MOS, I see two entries in Dashboard -> Systems with types:
    - Oracle E-Business Suite System
    - Database Instance
    Under "E-Business Suite System" there are two targets:
    - Oracle E-Business Suite <ORACLE_SID>appsdb
    ---> Database Instance <ORACLE_SID>
    Under "Database Instance"
    ---> Database Instance <ORACLE_SID>
    If OCM is configured properly for EBS R12 what are the correct entries in Systems section? And, what targets (Oracle Concurrent Manager, Database Instance) should be under which entry?
    Also, when raising an SR, there is only database host available in the host list. Is this correct?
    Thanks for your replies in advance.
    BR,
    TH

    In app node, I've installed (setupCCR) OCM under $ORACLE_HOME (10.1.2).
    Is this correct?Yes.
    How To Install and Configure OCM 10.3 on e-Business Suite [ID 1084325.1]
    How To Install or Reconfigure the Oracle Configuration Manager (OCM) Using the emocmrsp Command [ID 975500.1]
    In MOS, I see two entries in Dashboard -> Systems with types:
    - Oracle E-Business Suite System
    - Database Instance
    Under "E-Business Suite System" there are two targets:
    - Oracle E-Business Suite <ORACLE_SID>appsdb
    ---> Database Instance <ORACLE_SID>
    Under "Database Instance"
    ---> Database Instance <ORACLE_SID>
    If OCM is configured properly for EBS R12 what are the correct entries in Systems section? And, what targets (Oracle Concurrent Manager, Database Instance) should be under which entry?
    Also, when raising an SR, there is only database host available in the host list. Is this correct?OCM ( Oracle Configuration Manager ) and My Oracle Support : FAQ and Troubleshooting [ID 369619.1]
    How to install and configure OCM 10.3.1 on an E-Business R12 [ID 818385.1]
    Thanks,
    Hussein

  • I need a list of locations in Europe where OCM is available in English.

    Hi all,
    can anyone share a list of locations in Europe where OCM 10g exam is available in English.
    On the education.oracle.co.uk I only found London, but I thought there might be other locations.
    Is it correct that all other locations for English are in US?
    Regards,
    Mihail

    Thanks,
    I had no way to know that because, when I go to Germany page
    http://education.oracle.com/pls/web_prod-plq-dad/db_pages.getpage?page_id=4&dc=D46327GC20
    I see:
    Schulungszentrum Sortieren      Dauer      Kurstermin Sortieren      Kursbeginn      Kursende      Kursmaterial      Sprache      Plätze      In den Einkaufswagen
    DE - Düsseldorf      2 Tage      20-Okt-2008      10:00      17:00      Englisch      Deutsch      Verfügbar      In den Einkaufswagen
    Sie finden den Kurs oder den Termin nicht, den Sie suchen? Fragen Sie uns!
    That is
    Kursmaterial      - Englisch      
    Sprache      - Deutsch      
    and I thought that I must know Deutsch to visit this location. Is the web site incorrect, or I didn't interpret it property?
    Are you both (Moderator and Hub) sure, that english only knowledge is sufficient for an exam in Dusseldorf (D46327GC20 ) ?
    Thanks in advance,
    Mihail
    based in Sofia, Bulgaria

  • Help required in OCM-Order change management

    Hi All,
    I have to implement the Order change managment. I did few setting which are required and than i created ECR using release key. but using OCM it tells me to first make the changes in MATERIAL BOM than using transaction COCM i can make the changes in required production order.
    But my requirement is i want to change the Production BOM or Production routing directly without touching Material BOM .
    As sometime it happens only 1 or 2 Order BOM s are need to be changed only not the Material bom. So i want to track the Changes made in Order using OCM.
    What is the solution that i can change the Production Bom OR Production Routing directly using OCM and also how can i make the changes in Sales Order.
    Pls do the needful.
    Thanks
    Ravi Khurana

    Using Order Change Management (change management for production orders), it is possible to include existing procurement elements (production orders, planned orders, purchase orders) that are also affected by a change, in the change process.
    The change process in OCM is based on Initiating Objects. These initiating object records refer to changes in sales orders or in master data, which, in turn, necessitate changes to production orders.
    Thus, it is not possible to change the order directly using OCM.

  • Oracle 11g , Administrator OCM certification

    Hi,
    I have completed OCP certification in the developers track by clearing in the following exams : 1Z0-007 , 1Z0-147 and 1Z0-146.
    I wish to become an OCM in DBA track for Oracle 11g.
    Going by the steps mentioned in the Oracle certification website, I saw that the path to become an OCM would be as :
    1> OCA : Clearing 1Z0-007 / 1Z0-051 and 1Z0-052 exams.
    2> OCP : Clearing a certified hands on course followed by clearing 1Z0-053 exam and submitting a form as proof of clearing hands on training.
    3> OCM : Clearing 2 of the certified courses , appearing for the OCM exam , submitting a form as proof for clearing the certified courses and submitting the required application kit.
    Since, I have already cleared the exam 1Z0-007 , do I have to clear it again as part of becoming an OCA or will the previous clearing of this exam suffice ?
    also , do I have to clear 1Z0-051 exam.
    Please note , I have cleared 1Z0-007 around February 2010.
    Thanks in advance.
    Regards,
    Haider

    ...I saw that the path to become an OCM would be as...The steps you have listed are correct.
    Since, I have already cleared the exam 1Z0-007 , do I have to clear it again...No, the one exam will serve for both certification tracks. Exam results do not expire.

  • Number of OCMs in the world currently

    Hi,
    Does anyone know the current number of OCM 11g in the world?

    matthew_morris wrote:
    The question has come up before.  The answer was that Oracle does not give out these figures.
    it seems Oracle is in transparent company

  • ACE OCM counters increasing

    Hi,
    OCM(outbound connection Mgr) Counters are increasing & we have found that ACE is reseting client connection. I have found following bug. Currently we are running A2(1.1a). Anyone there hit by the same bug. Your experiences on this are appreciated.
    CSCsr96168
    Connection Free List Corruption
    Symptom: New TCP connections are sometimes reset. Conditions: ACE module running A2(1.1a) Workaround: Downgrade to A2(1.1) Further Problem Description: This problem is suspected when `show np 2 me-stats -socm` shows the following counter incrementing: OCM Statistics: (Current) -------------- Drop [out of connections]: 14455 16
    # show np 2 me-stats -socm
    OCM Statistics: (Current)
    Connection create received:                30526367            34
    LB dest decision received:                  6724048            15
    Drop [LB dest decision fail]:                    51             0
    NAT Pool Alloc [addr/port]:                   25586             0
    NAT Pool Free [addr/port]:                    25584             0
    OCM Packet count (Hi & Lo):                37250415            49
    (Context 4 Statistics)
    Drop [mac lookup fail]:                           1             0
    Connection inserted:                         853174             1
    Packet message transmitted:                  853149             1
    # show np 2 me-stats -socm
    OCM Statistics: (Current)
    Connection create received:                30526681            33
    LB dest decision received:                  6724153             8
    Drop [LB dest decision fail]:                    51             0
    NAT Pool Alloc [addr/port]:                   25586             0
    NAT Pool Free [addr/port]:                    25584             0
    OCM Packet count (Hi & Lo):                37250834            41
    (Context 4 Statistics)
    Drop [mac lookup fail]:                           1             0
    Connection inserted:                         853195             6
    Packet message transmitted:                  853170             6
    # show np 2 me-stats -socm
    OCM Statistics: (Current)
    Connection create received:                30528663            24
    LB dest decision received:                  6724773            11
    Drop [LB dest decision fail]:                    51             0
    NAT Pool Alloc [addr/port]:                   25586             0
    NAT Pool Free [addr/port]:                    25584             0
    OCM Packet count (Hi & Lo):                37253436            35
    (Context 4 Statistics)
    Drop [mac lookup fail]:                           1             0
    Connection inserted:                         853328             2
    Packet message transmitted:                  853303             2
    Regards,
    Akhtar

    Hello Akhtar,
    You've probably noticed that the "Drop [out of connections]" counter referenced in the bug is not shown in the output of your commands.  This means that this counter is currently at zero.  It will only be shown if it has a non-zero value.  Therefore, this implies that this counter is not going up.
    Also, from the output you supplied, nothing looks alarming to me that would indicate the cause of the resets.  Here is how I would recommend you proceed:
    If possible, upgrade to a newer software release.  The release you are on is quite dated now and there have been hundreds of software fixes since that release.  Further, the A2(1.x) software train will no longer have any maintenance updates.  Upgrading to A2(2.3) may be the quickest solution for you if you are hitting a bug on the ACE.
    If you cannot upgrade, or you upgrade and the issue persists, then you should gather the following information:
    Get a showtech from the context in which the VIP resides
    Start a capture of the ACE tengig port(see not below)
    Run some test connections to replicate the RST
    Stop the capture
    Get a second showtech
    Now you will be able to look at the connections in Wireshark, and compare your two showtechs to see what, if any, error (or Drop) counters increment.  If necessary, please open a SR with Cisco TAC for expert analysis.
    NOTE:  In order to do the Tengig capture, you would need to configure SPAN on the Supervisor.  The source interface would be Te/1.  So for example, if your ACE is in slot 3, then the source interface of your monitor session would be Te3/1.
    Regards,
    Sean

  • OCM exam issue

    Moderators,
    I am not sure if this is the correct place to ask my query but i have searched extensively on oracle website but didn't get any information on that.My query is
    I was in talks with oracle executive for the past one month and finally booked my OCM 10g exam in India for 25th and 26th of October 2010.I didn't get any confirmation from oracle regarding the booking of exam till today 22nd of October 2010.I was given a confirmed date of exam by executive. The exam is in some other city and i have to take a flight to reach there.The oracle executive who took the payment from me is not picking up the phone nor replying my phone calls for the past 1 week.I called another executive at the local oracle office. He confirmed that such exam is not being conducted on 25th and 26th.The oracle executive knows my cell phone number and is not picking up my calls. When i called from some other number, she picked up the call and started giving me excuses. At the last hour, i have to cancel my flight. I can't say how much mental tension and harassment i have received apart from financial loss. I am shocked that these kind of people do exist in sales department of a renowned company.The sales executive didn't bother to book the exam even after taking exam fee but confirmed me the dates.I was not even given the 2nd point of escalation to discuss this issue.I have all the mail communication with the oracle executive and want to escalate this issue. Could anyone please let me know the department within oracle that looks into this kind of issues?
    Thanks
    Rishi
    Edited by: user11970591 on Oct 22, 2010 4:38 AM

    user11970591 wrote:
    Moderators,
    I am not sure if this is the correct place to ask my query but i have searched extensively on oracle website but didn't get any information on that.My query is
    I was in talks with oracle executive for the past one month and finally booked my OCM 10g exam in India for 25th and 26th of October 2010.I didn't get any confirmation from oracle regarding the booking of exam till today 22nd of October 2010.I was given a confirmed date of exam by executive. The exam is in some other city and i have to take a flight to reach there.The oracle executive who took the payment from me is not picking up the phone nor replying my phone calls for the past 1 week.I called another executive at the local oracle office. He confirmed that such exam is not being conducted on 25th and 26th.The oracle executive knows my cell phone number and is not picking up my calls. When i called from some other number, she picked up the call and started giving me excuses. At the last hour, i have to cancel my flight. I can't say how much mental tension and harassment i have received apart from financial loss. I am shocked that these kind of people do exist in sales department of a renowned company.The sales executive didn't bother to book the exam even after taking exam fee but confirmed me the dates.I was not even given the 2nd point of escalation to discuss this issue.I have all the mail communication with the oracle executive and want to escalate this issue. Could anyone please let me know the department within oracle that looks into this kind of issues?
    Thanks
    Rishi
    Edited by: user11970591 on Oct 22, 2010 4:38 AM- Please be aware i suspect there is high risk you may have been the victim of fraud of some bad people pretending to be from Oracle.
    - As in most countries, but perhaps particularly in India and some other countries, there exist a small number of dishonourable individuals who will happily part people from their money and not give the required service in return.
    I would not advise putting full details on the forum , but if you get no satisfaction from the previous email address for oracle education india (give them chance to respond .. and remember it is the weekend ) ... then write full dates and phone numbers in an email to the ocpfraud_ww@oracle cc'd to [email protected] just in case there is an extreme case of incompetence or fraud going on.
    - However some aspects of your post do worry me ..... for example if i was booking an Oracle OCM exam .... (which i cant 'cos i've not attended pre-req courses and i'd fail the thing anyway) .... i somehow wouldn't expect to be talking to an Oracle executive about it. I would also wonder why you've just needed to register with OTN yesterday ... there can be good reasons for this ..... but for an OCM candidate it is high probability indicator that something is wrong.

  • OCM inconsistencies

    Dear Experts,
                                I have read limitations of OCM.  I am not using collective order and there is no phantom assembly in BOM. Overall profile is assigned in work scheduling view. Strategy used is 40 .I have created change request in CC31 with release key and made changes in BOM and routing when production order was in release state ( one operation was confirmed already ) . Later on I released change request/ECO with release key supporting OCM. IN COCM I found that it is identifying production order but not recognizing purchase order.
    When I process production order in T code COCM while checking it locks production order, but when I do change original order (Execute process steps) itu2019s not reflecting in production order. I checked in OPL7, no where I set do not execute indicator. Also the performance is not consistent, not always it finds affected production order. Also I want to know whether itu2019s possible to find out affected purchase order and lock it.
    When I try to use undo processing steps its not removing tick mark under columns Findchng,chkchng that means I am not able to undo it by using this button once changes are complete. Is it standard SAP.
    Is it possible to make changes at any stages of production ?
    Any idea will be appreciated ! 
    Neal
    Edited by: Neal Gibson on Apr 3, 2009 11:24 AM

    Unanswered ! closing

  • How to create Web Service & Web Service Client on OCMS

    Hi all,
    Is anybody can show me how to create Web Service on OCMS?
    I only know how to do it on WebLogic Server.
    It has many differences between OCMS and WLS.
    Thanks & Regards,
    Jack.

    Jack,
    This tutorial can help:
    http://www.oracle.com/technology/products/ocms/pdf/parlayxjdeveloper.pdf
    Regards,
    Adam

  • Order Change Management(OCM) in SAP

    Dear All,
    OCM is applicable in MTO Scenario.
    Kindly let me know the steps involved to activate OCM n how to proceed
    further.

    Hi Bagchi,
    Order Change Management is applicable for MTO/MTS Scenario,
    <u>First:-</u>
    In WorkScheduling View of Material Master (FERT/HALB or Any Defined for Production) you need to maintain "<b>Overall Profile"</b>
    <i>This Overall profile should be configured in SPRO > PRoduction>Shop Floor Control > Operations>Change Management for Production Orders--><b>Define Overall Change Profile</b>.</i>
    <u>Process of OCM follows this way:</u>
    Create a Change Number <b>CC01 with Release</b> Key
    In Object Types select/tick "Actv", "object", "MgtRec",
    You get the Change Number by Saving .
    Use this Change Number to Change BOM or Routings
    <i><b>Then Release the Change Number useing Release Key till then you don't find the Change of BOM in Production Order.</b></i>
    Then go to Oder Change Process<u><b> T Code :- COCM</b></u>
    Tick Change Number and Select the Change Number & Execute
    Select the Production Order, click on “Procurement element” icon you get another screen select and execute again.
    You get an Pop-Up screen. "Determine changes”, “Check changes”, “Change Original Order”.
    you see the changes in BOM for Production Order i.e. after COCM.
    Then Confirm the Changes in Production Order then New changes will be Active in production Order.
    Regards
    Rehman
    <b>Reward Your Points If Useful</b>

  • OCM for Java EE no longer current?

    Is Oracle Certified Master for Java EE still a current certification? I only ask as this is available for JavaEE 5, but not 6. I am concerned this is now a defunkt cert

    This certification is currently being evaluated for upgrade to a new version. At this time, I cannot give a definitive answer about whether or not there will be an EE 6 version. We also do not have any info on retirement of the EE 5 version. I don't expect that this certification will retire terribly soon, as it is still getting a good amount of traffic. I'm sorry, I realize that my answer is not very informative or helpful, but that is the only info I have at this time. If you are interested in this certification, I would recommend that you go ahead and go for it. Even if we do end up retiring the certification path, the certification remains valid. It remains on your list of certifications in CertView and you can continue to use the OCM logo.
    If you are worried about getting 1/2 way through the path and having the path retire, I can tell you that we typically provide at least 3 months notice for a retiring exam/certification path. This path may require extra time because of the length of time that it takes to complete this certification path. Whenever this certification path is set to retire, we will make every effort to contact all candidates who are working on the certification at that time, so always be sure that your email address is updated and correct in your Pearson VUE profile.
    Regards,
    Brandye Barrington
    Certification Forum Moderator

  • OCM for Revesion level in the Material Master and for the BOM

    Hello,
    I use My SAP 6.
    I have implemented OCM. It's used for 2 things:
    - The first is for revision level in the Material Master.
    - the second is for the BOM.
    Today, the customizing is good, it's work.
    My need is to have the same change number for those 2 evolutions:  for the material master evolution and for the BOM evolution.
    It's possible, and how?
    Thanks for your answers.
    Bérenger

    I do not think this is possible. Service level is usually used for safety stock planning.

  • Installation OBIEE 11.1.1.5.0 failed at Configuration OCM

    Hi,
    I am installing OBIEE 11.1.1.5.0 on a Windows Server 2008 R2 with an Oracle Database 11g release 2, but I have a problem with the last step Configuration OCM.
    Error : Error encountered in deploying OCM instance. Exit code =
    Configuration Action 'Configuration COM' has failed.
    Any ideas ?
    Thanks
    Edited by: 866321 on 17 juin 2011 06:28
    Edited by: 866321 on 17 juin 2011 07:03

    I also have the similar problem. I am installing OBIEE 11G(11.1.1.5.0) in the following
    Linux atlopm02 2.6.18-194.el5xen #1 SMP Mon Mar 29 22:22:00 EDT 2010 x86_64 x86_64 x86_64 GNU/Linux
    I am doing the Enterprise Install, and it failed at the last step
    Configuring OCM
    Given below is the error from the install log
    *************** Executing Command **************
    /u01/app/oracle/middleware/instances/instance1/bin/opmnctl startproc ias-component=coreapplication_obisch1
    opmnctl startproc: starting opmn managed processes...
    progress in calculate progress2
    Executing Task: Modifying BI Configuration Files
    progress in calculate progress2
    Executing Task: Configuring OCM
    oracle.as.config.ProvisionException: Error encountered in deploying OCM instance. Exit code = 11
    at oracle.sysman.ccr.configCCR.OCMComponentImpl.onCreate(Unknown Source)
    at oracle.as.config.impl.OracleASComponentBaseImpl.createComponent(OracleASComponentBaseImpl.java:596)
    at oracle.as.config.impl.OracleASComponentBaseImpl.create(OracleASComponentBaseImpl.java:105)
    at oracle.as.install.bi.biconfig.standard.SystemComponentTask.doExecute(SystemComponentTask.java:66)
    at oracle.as.install.bi.biconfig.standard.AbstractProvisioningTask.execute(AbstractProvisioningTask.java:70)
    at oracle.as.install.bi.biconfig.standard.StandardProvisionTaskList.execute(StandardProvisionTaskList.java:61)
    at oracle.as.install.bi.biconfig.BIConfigMain.doExecute(BIConfigMain.java:112)
    at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:335)
    at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:87)
    at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:104)
    at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
    at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:63)
    at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionMana
    ger.java:158)
    at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:8
    1)
    at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:83)
    at java.lang.Thread.run(Thread.java:662)
    I appreciate your suggestions/input to overcome this error.
    Thanks
    Bala

Maybe you are looking for

  • Report on Stock Vs VAlue on one particular date,

    Dear All, Is ther any Table or Functional Module Or BAPI ,if I pass the material /Plant/St.location and any date,which will give the output of Stock and Value?

  • Best way to code a Chat Application

    Hi I'm starting a project at work that is going to involve a chat mechanism between 2 parties only. Then the application will be needed to transfer a file, or maybe xml between the 2 clients. I'm looking into the various technologies to do this, so d

  • Attach text UNDER path

    I know I've done this before but I can't figure it out or find it - how do I attach the TOP of my text to the BOTTOM of a path? I can attach the text to the path, but its default is the bottom of the text to the inside of the path. I want to attach i

  • Missing RX neighbours in WCS

    I've recently upgrade the wireless infrastructure to the latest versions of code. but since doing that when, i go into the monitor page for an access point in the wcs at the bottom it should show all the other access point it can see and their signal

  • Locations in calendar events

    Why is it when I enter a calendar event in my exchange calendar locations aren't recognized but when I use any other non-exchange calendar when I enter an event and enter an address under location it shows the locations on a map?