OCP 10g from 9i

friends,
I want to upgrade my 9i certification into 10g. Please send me link about free oracle 10g student guide for new feature.
regards

user11977818 wrote:
friends,
I want to upgrade my 9i certification into 10g. Please send me link about free oracle 10g student guide for new feature.
regardsAre you aware this is most likely to be copyright material ?
I notice also none of your previous questions have been marked resolved.
Try:
[http://download.oracle.com/docs/cd/B19306_01/server.102/b14214/toc.htm]
[http://www.amazon.com/OCP-Features-Administrators-1Z0-040-Certification/dp/0782143555]
There is essentially to my knowledge no legiimately awailable free material apart from the Online Oracle Manuals such as above.
I have repeated a link ofr a low cost book that should be helpful
Rgds- bigdelboy.

Similar Messages

Needs to upgrade to 10g from 8i

Hi Gurus
Please help me upgrading to oracle 10g from 8i. Actually i got 8i ocp in 2001, Since then i was working on Oracle Ebusiness Suite 11i and did not get chance to upgrade to 10g. I request all the gurus to put some light on, how to upgrade? Where are the dumps? etc.
Thanks

Hello,
The only guru I can remember is guru josh. Anyway you can visit the following link;
Certification Upgrades
http://education.oracle.com/pls/web_prod-plq-dad/db_pages.getpage?page_id=44
I think you will find the required information. Good Luck!
Adith

OCP 10g exam prep class requirment 3000$

After OCA 10g, To appear int OCP 10g exam, requirment is that one should attend the preparation class which cost 3000$, What if one can't afford this, Is there any way to skip this class or attend some other prereq.....

(I would like somebody to correct me if I am wrong in my understanding)
While it is an absolute must that you should attend a hands-on session from Oracle University as a 10g OCP requirement, It is NOT AN absolute must that you shell out $3000 USD. You can pick your course. See below for more details.
http://www.oracle.com/global/us/education/certification/dba10g_ocpcoursereq_approvedlist.html
Here, you will find that, If you are looking for a cost-effective option, and don't care which course you go to, but also satisfy the OCP 10g course requirement, go with
"Oracle Database 10g: SQL Tuning Workshop" which is only $1800 USD ! (Well, only is not a good word to use here....however fits best in this context !!)

How to call a Report 10g from a parameter form..?

Hello,
pls i wanna know the procedure of :
How to call a Report 10g from a parameter form..?
regards,
Abdetu..

hopes it work for you.
procedure get_report is
pl_id paramlist;
p_year varchar2(4);
param_name varchar2(10) :'param';
begin
pl_id := get_parameter_list(param_name);
if not id_null(pl_id_)then
destroy_parameter_list(pl_id);
end if;
pl_id := create_parameter_list(param_name);
p_year := year -- assign the value.
add_parameter(pl_id,'p_year',text_parameter,p_year);
execute_report('report_name',pl_id);
end;

Problem when connecting locally to Oracle Database 10g from Java code

Good afternoon,
I try to connect to my local Oracle 10g from JAVA code. Could somebody tells me what are the 'values' to enter in place of 'value1, value2, value3' in the following:
final String connectionURLThin = "jdbc:oracle:thin:@value1:value2:value3";
I tried to put my 'user' and 'pw' credentials I used when connecting with SQL*PLUS:
value1=my_user_name
value2=my_pw
value3=my_schema
but it doest work. Besides where could have I to put the 'WORKSPACE" name?
Thanks for any help.
Claude
Details:
ERR MESSAGE----------------------
Exception in thread "main" java.lang.NoClassDefFoundError: oracle/dms/instrument/ExecutionContextForJDBC
at oracle.jdbc.driver.PhysicalConnection.<init>(PhysicalConnection.java:365)
at oracle.jdbc.driver.T4CConnection.<init>(T4CConnection.java:165)
at oracle.jdbc.driver.T4CDriverExtension.getConnection(T4CDriverExtension.java:35)
at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:854)
at java.sql.DriverManager.getConnection(DriverManager.java:620)
at java.sql.DriverManager.getConnection(DriverManager.java:200)
at javaapplication6.ConnectionExample.driverManager(ConnectionExample.java:138)
at javaapplication6.Main.main(Main.java:36)
Caused by: java.lang.ClassNotFoundException: oracle.dms.instrument.ExecutionContextForJDBC
at java.net.URLClassLoader$1.run(URLClassLoader.java:217)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:205)
at java.lang.ClassLoader.loadClass(ClassLoader.java:319)
at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:294)
at java.lang.ClassLoader.loadClass(ClassLoader.java:264)
at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:332)
... 8 more
Java Result: 1
BUILD SUCCESSFUL (total time: 0 seconds)
---------------------ERR MESSAGE
JAVA code------------------it compiles but throw an error when running there -> (*)...
final String driverClass = "oracle.jdbc.driver.OracleDriver";
final String connectionURLThin = "jdbc:oracle:thin:@jeffreyh3:1521:CUSTDB";
final String userID = "scott";
final String userPassword = "tiger";
final String queryString = "SELECT" +
" user " +
" , TO_CHAR(sysdate, 'DD-MON-YYYY HH24:MI:SS') " +
"FROM dual";
public void driverManager() {
Connection con = null;
Statement stmt = null;
ResultSet rset = null;
try {
DriverManager.registerDriver(new oracle.jdbc.driver.OracleDriver());
con = DriverManager.getConnection(connectionURLThin, userID, userPassword); // (*) prob here
stmt = con.createStatement ();
rset = stmt.executeQuery(queryString);
rset.close();
stmt.close();
} catch (SQLException e) {e.printStackTrace();
--------------------JAVA JDK 1.6
My system ------------------------
Oracle Database 10g Express Edition Release 10.2.0.1.0 - Product
PL/SQL Release 10.2.0.1.0 - Production
CORE 10.2.0.1.0 Production
TNS for Linux: Version 10.2.0.1.0 - Production
NLSRTL Version 10.2.0.1.0 - Production

Yes, the network connection could not be established. Like the error said.
What you're asking about is the exact reason, but that could be any number of things and not at all related to code. You could have the wrong host, the wrong port. A firewall could be blocking the outgoing connection, a firewall could be blocking the incoming connection. Etc. etc.

Complexities of Migrating Oracle 10g from Solaris to HP-UX Itanium

Can anyone share their experiences with regards to migrating Oracle 10g from Solaris on a Sun platform to HP-UX 11i v3 (Itanium) on HP Integrity servers. We are trying to consider all the risks associated with such a move. How much time delay did you experience in resolving unexpected issues along the way? How complex is the process? If you had to do it all over again, would you?
In addtion, we will also be migrating Oracle eBusiness Suite 11i (11.5.10.2).
We appreciate your helpful feedback.
Thank you.

Here is more information:
- the database size is currently about 500GB
- our ASP allows us to be down as much as we want however the company's own needs can only allow a downtime window of two days (over the weekend)
- i presume further that RMAN might be an option to use to backup the database and instance to some transportable media
- it would take about four days to get that media from the ASP to our facility so durign that time the instance at the ASP would have to be used
- after we get the backup media and load everything into our in-house site, our last step would be to find a way to migrate all changes over the WAN. I am told that unless the platforms are the same on both ends, mirroring will be extremely difficult or impossible. If we have a platform that is different from the ASP platform, then the migration of all changes will require conversion and other mechanisms. I am told that HP-UX has so much complexities that this will be a daunting task to accomplish.
Do you have any opinions and recommnedations?

Invoke oracle report 10g from database pl/sql package

Hi
Is there a way that i can invoke an oracle report 10g from the database pl/sql package? I am working on a requirement that needs to generate a report when one of the criteria is not met.
Please suggest me on this.

Thanks for the info.
I have a scenario where i need to fetch members details like name , email address and so on from the mainframes on the oracle database. Then on the oracle database i need to check if they have a email address or not. If yes then i need to generate a notice and mail it to them. If they don't have an email address, i'll have to print that out in a some centralized location.
By the way, the notice was developed using oracle reports 10g.
Now i am developing a pl/sql package which will do the address validation but i didn't know how to call a oracle report to generate the notice in pl/sql procedure.
As suggested i will try with dbms scheduler and see if that works for me.

How can i pass OCP 10G?

i passed 1z0-042 exam.
i wanna pass 1z0-043 or ocp 10G.
tell me, how can i pass this exam?

Fahd is right. The art of practicing can only make one pass in exams like this. Problems are now becoming scenarios based, so unless you are familiar with the scenarios, its difficult to pass these exams. Read the book and practice. You are done.

Question on migrating oracle 10g from solaries to linux?

Can some one tell the exactly what is the advantage of migrating oracle 10g from solaries to linux?
Thank you,
hb

call me
[email protected]

Check if the SFP is 1G or 10G from UCSM?

Hi
how to check if the SFP is 1G or 10G from UCSM?
Anandraj

From the Equipment tab, expand the Fabric Interconnect, Expand the associated module then click on the port in question. On the right side the SFP Model and Type will display. From there, do a search for the model type if you don't know it offhand.
Robert

OCP 10G or 9i in dilemma

Hi;
I am planing to write OCP. i wanted to write sql and pl/sql papers.
In OCP 10g i dint find a paper for sql or pl/sql like the one in 9i. I felt OCP 10g is more towards administration. i wanted to write developer exam which gives more importence to sql and pl/sql development. i want to be a sql pl/sql developer in the industry due to which i am planing to write ocp. so please help me regading which exam to write. I have to write 91 or 10g.when 10g is more superior how will i write 9i.i am in a dilemma . please pull me out of this.
Srinivas.

But how will u skip 9i,,
to become ocp dba for 10g,, u have to give ocp 9i,,,or upgrade exam. right?

Launch Discoverer 10g from Oracle Applications Menu

Please provide steps to launch Discoverer 10g from Oracle applications menu.
Thanks in advance.
suresh

Hi,
Follow these steps....
The process is in 3 stages _(stage 1 will be done only once for all the reports)._
Stage 1:
Set the application discoverer relevant parameters.
Perform this stage only once.
1.1 Enter the application in System Administrator responsibility.
1.2 Choose menu 'Profile' and then submenu 'System'.
1.3 Find the desired profile by filling 'Icx%Discoverer%' and press Find button.
1.4 Fill the fields (only the values) as described in the table of values bellow.
Parameter Value
ICX: Discoverer Default End User Layer Schema Prefix your eul name without the suffix (_US).
note that if you have several invs it can be diffrent between them.
ICX: Discoverer End User Layer Language Override American English
ICX: Discoverer Launcher http://your_server_name:7777/discoverer/viewer?Connect=[APPS_SECURE]
ICX: Discoverer Release 10 or any other that you are using
ICX: Discoverer Viewer Launcher http://your_server_name:7777/discoverer/viewer?Connect=[APPS_SECURE]
ICX: Discoverer use Viewer Yes (or not if you want plus to open - but change the viewer to plus in the link as well - the previos parameter)
Don't forget to press save button.
Stage 1 Ends.
Stage 2:
Build an oracle application function for each discoverer report.
Perform this stage for each report.
2.1 Enter the application in System Administrator responsibility.
2.2 Choose menu 'Application' and then submenu 'Function'.
2.3 Fill needed values in each tab by the next instructions (function values)
2.3.1 Description tab – fill the function, function user name and the description. Notice that the function value should be without spaces.
2.3.2 Properties tab – fill the:
Function with the same name you have choose in the previous tab,
Type with 'SSWA plsql function',
Maintenance Mode Support with 'None' (Default value),
Context Dependence with 'Responsibility' (Default value).
2.3.3 Form tab- fill the:
Function with the same name you have choose in the previous tab,
Form & Application fields leave empty,
Parameters – there are two options available:
1st Leave it empty – will cause the function to open the discoverer all reports web page and user will have to choose a specific report from the list .
2nd Fill it with value '=workbook=name of the workbook' but without spaces, convert the spaces (if there are any) from the workbook name to + (plus) sign.
For example '=workbook=BI+SERVICE+Performance' represents the string for the 'BI SERVICE Performance' report.
Note: you can also send parameters to the report but since almost all the parameters have a default value (accept from dates) it's not necessary.
2.3.4 Web HTML tab – fill the HTML call with ' OracleOASIS.RunDiscoverer'.
Don't forget to press save button.
Stage 2 Ends.
Stage 3:
Build an oracle application menu or submenu for each discoverer report that represented by the function you has created in stage 2.
Perform this stage for each pair - responsibility + report/function.
3.1 Enter the application in System Administrator responsibility.
3.2 Choose menu 'Security' and then submenu 'Responsibility' and then submenu 'Define'.
3.3 Locate the needed menu by the responsibility that you want to enable her to use the report – of course that the report should be granted for the responsibility via discoverer mechanism as well.
Do it by clicking on the flashlight that located in the left upper corner and find the needed responsibility.
3.4 Find the needed responsibility and select her via next screen (Don't forget to use % as wildcards)-choose by double click on her
3.5 Copy the menu name that related to the responsibility you have choose from the menu field located in the next screen and close the window.
3.6 From the navigator screen choose menu 'Application' and then submenu 'Menu'.
3.7 Locate the menu that you've copied in 3.5 (with the flashlight and the find screen, double click on the menu name – similar to 3.3 and 3.4) via next screen.
3.8 Press on the 'add record' sign (+) that located in the right upper corner of the screen (Do it after the mouse sign and focus is in the rows as you can see the oval mark).
3.9 Fill the prompt with what you want the user to see in the menu that will activate the report link and after fill the user function name as you have build her in stage 2 (Don't forget to save it).
Don't forget to press save button.
Stage 3 Ends.

Uninstall oracle 10g from Linux Red hat

is any body know the standard procedure to uninstall oracle 10g from linux red hat.

The correct answer is "Undo the changes you made during the install"
By this I mean:
Stop all of the processes
Delete the ORACLE_BASE directory (usually the one one level up from ORACLE_HOME)
Delete the oraInventory directory if it isn't inside ORACLE_BASE
Delete /etc/oratab, /etc/oraInst.loc
Delete /user/local/bin/coraenv, /user/local/bin/oraenv, /user/local/bin/dbhome
Undo any environment settings you may have modified (in .bash_profile and bashrc)
That should be just about it. That's how I usually clean out my system between installs.
~Jer

Migrating to 10g from Oracle 7

Hi all,
The company is planing to migrate to 10g from Oracle 7.
I have heard that it is impossible to migrate directly from 7 to 10g using dbua.
Is it possible using export/import. I have not worked on 7 or 10g.
Also how can we move from forms3 to forms 6i.
Thanks in Advance,
Sanju

As for Forms, read the documentation and view the tutorials on
http://www.oracle.com/technology/products/forms/htdocs/upgrade/index.html
(especially 'Upgrade character mode Forms to the Web')
Also: http://www.oracle.com/technology/products/forms/pdf/264850.pdf
You will probably first have to upgrade to Forms 4.5, then to 6i.
Going from character mode to a graphical user interface is not so easy. You may consider a professional tool like the converter from Kumaran.

How 2 call a report 10g from a parameter form 10G

Hello,
pls. i need steps ,or docs how 2 run a report 10g from a parameter form ;
Is it requireD for the Parameter form to call a report an Application Server no* ???*
i had a previous experience with the code due to run the report as follows:_
DECLARE
   PARAM_ID                                 PARAMLIST ;
   PARAM_NAME                           VARCHAR2(30) := 'REPORT_PARAMETER';
   ALRT                                         NUMBER;
   ERR_TXT                                   VARCHAR2(1000);
   repid                                         REPORT_OBJECT;
   v_rep                                        VARCHAR2(100);
   v_REP_SERVER_NAME       VARCHAR2(200);
   v_ip                                          VARCHAR2(100);
BEGIN
       PARAM_ID := GET_PARAMETER_LIST(PARAM_NAME);
       IF NOT ID_NULL(PARAM_ID) THEN
          DESTROY_PARAMETER_LIST('REPORT_PARAMETER');
       END IF;
       v_REP_SERVER_NAME := REP_SERVER_NAME;
BEGIN
        SELECT PARAMETER_VALUE
        INTO   v_ip
        FROM GENERAL_FIXED_PARAMETERS
       WHERE PARAMETER_ID = 'REPORT_SERVER_IP';
       EXCEPTION
       WHEN OTHERS THEN
       Message ('OTHERS' || SQLCODE || ' And ' || SQLERRM);
       Message ('OTHERS' || SQLCODE || ' And ' || SQLERRM);
END;
       PARAM_ID := CREATE_PARAMETER_LIST(PARAM_NAME);
       ADD_PARAMETER(PARAM_ID,'PARAMFORM',TEXT_PARAMETER,'NO');
       ADD_PARAMETER(PARAM_ID,'COPIES',TEXT_PARAMETER,:COPIES);
       ADD_PARAMETER(PARAM_ID,'P_DISPLAY',TEXT_PARAMETER,:DESTYPE);
       ADD_PARAMETER(PARAM_ID,'DESFORMAT',TEXT_PARAMETER,'pdf');
       ADD_PARAMETER(PARAM_ID,'group_id',TEXT_PARAMETER, :group_id);
         repid := find_report_object('WH_R01_GRP_ITEM');
         SET_REPORT_OBJECT_PROPERTY(repid,REPORT_SERVER,v_rep_server_name);
         v_rep := RUN_REPORT_OBJECT(repid,PARAM_ID);
WEB.SHOW_DOCUMENT('http://'||V_IP||'/reports/rwservlet/getjobid'||substr(v_rep,instr(v_rep,'_',-1)+1)||'?server='||v_REP_SERVER_NAME,'_blank');
-- http://server_name:8889/reports/rwservlet?report=rep_name.rdf&paramform=yes&destype=CACHE&desformat=htmlcss&userid=id/pass@conn
END;notice here the value of V_IP it is retrieved from the following table desc...
The table desc   GENERAL_FIXED_PARAMETERS that i select from the values are as follows:_
SQL>   DESC GENERAL_FIXED_PARAMETERS;
Name                                      Null?    Type
PARAMETER_ID                                       VARCHAR2(200)
PARAMETER_VALUE                                    VARCHAR2(200)
PARAMETER_DESC                                     VARCHAR2(200)
MODULE                                             VARCHAR2(200)it's stored value is as follows:
SQL> select * from GENERAL_FIXED_PARAMETERS;
PARAMETER_ID   PARAMETER_VALUE PARAMETER_DESC   MODULE
REPORT_SERVER_IP     rep_oraas_OracleAs_10gNotice here the value of the PARAMETER_VALUE is a string ; as if it's a generic value to be applied on any REPORT_SERVER_IP this value ...
Where Should i retrieved or Get ???
That was long time i can't remember pls help me 2 run my report what should id
i searched the google but there is a missing link can u help and guide me it's urgent pls.
if needed 2 start oc4j for reports , setting pathes ,fonts, enviroment file etc.
The report object's property in the object navigator is as follow:_
+ Oracle Developer Integration node :
File name : My_Report_name
Execution Mode: Runtime
Communication Mode : Synchronous
Data Source data block :NULL
+ Reports node:
Report Destination Type : FileThanks in advance,
Regards,
Abdetu...

Thanks InoL for reply,
REPORT_SERVER_IP is not correcti had doubted but wasn't sure of it...!
My First Question was :
Is it requireD for the Parameter form to call a report an Application Server no ???*the answer i found is Yessss
Regards,
Abdetu...

OCP 10g from 9i

Similar Messages

Maybe you are looking for