OCR on Acrobat 9 Pro not working - will not explain why.

I ran the OCR function on multiple 500-page PDF documents for an upcoming project. For the most part, the OCR worked. However, OCR DID NOT work on specific pages within the documents (would usually happen once or twice every few thousand pages). I went back through the PDF documents to try and run the OCR on the individual pages that did not work the first time, and the screen showed the following error: "Acrobat could not perform recognition (OCR) on this page because:". There was nothing else in the error box - no explanation as to why OCR would not work on those individual pages.
Has anyone else had luck with this problem? I would really appreciate any help I can get.

Very likely the pages of interest have a least one character of renderable text. This might not be readily seen by you or me but it'd be there.
Acrobat's OCR will not process a page that has any renderable text.
Be well...

Similar Messages

  • Error 1310 on trying to install Adobe Acrobat X Pro.  Software will not install.

    In trying to install Adobe Acrobat X Pro from either a purchased DVD or from an Adobe download I get an Error message: Error 1310 and the installation will nor proceed.  It asks to verify access to C:\Program Data\Adobe\ Adobe PDF\Distiller\Startup\example.ps.  This complete directory is present in my C:\ drive.  How do I verify this access and what must be done to successfully install Acrobat X Pro?

    don't use email.
    open your thread in a browser, Re: Error 1310 on trying to install Adobe Acrobat X Pro.  Software will not install.
    and click the camera icon to insert an image.

  • Acrobat Connect Pro 7.5 will not open MS Outlook 2010

    I have recently updated my OS to Windows 7. Acrobat Connect Pro 7.5 will not open MS Outlook 2010 with the preformatted email message after submitting via the Email Invitations button. MS Internet Explorer 8.0 goes to a blank page. Is there a compatibility issue with Acrobat Connect Pro 7.5, MS Outlook 2010, and/or Windows 7?

    WhOaGRL86 wrote:
    its been running for months, with no problem what so ever
    You were running a non-Intel version on an Intel Mac. You might not have run into problems before but it was only a matter of time. You cannot run an old version and then install brand new versions of ProKit and QuickTime - it will just break.
    So you can either reinstall everything from scratch and then just keep it as it is without ever installing software updates, or you can upgrade to FCP 7. I recommend the latter.

  • Acrobat X Pro not working, tryed to re-install and does not recognize Serial Number?

    Acrobat X Pro not working, Serial Number not recognized?

    Hi lv123321,
    Do you have Acrobat only License no or is it a part of suite. If Acrobat X pro is a part of suite then you need to use the suite setup to install Acrobat.
    Also if possible could you please private message me the serial no so I can try decoding it.
    Regards,
    Abhijit

  • Since windows has been update acrobat x pro not working, what to do?

    since windows has been update acrobat x pro not working, what to do?

    acrobat x pro cs6, windows 7, there are no text massage
    i did tried to uninstalling and reinstalling acrobat, but the problem comes
    back
    the issue is:
    i can close to pdf file at working on indesign, but when i want to open the
    file the acrobat wont respond, it just not open at all.
    2014-02-19 16:23 GMT+02:00 Rave <[email protected]>:
        Re: since windows has been update acrobat x pro not working, what to
    do?  created by Rave <http://forums.adobe.com/people/Rave> in *Acrobat
    Installation & Update Issues* - View the full discussion<http://forums.adobe.com/message/6135679#6135679

  • Download Acrobat X Pro NOT Acrobat XI Pro

    I own the creative suite which includes Acrobat X Pro. I need to download only Acrobat X Pro, not the whole 15gb creative suite, but I can only find a link to download Acrobat XI Pro, which I do not have a serial for.
    The fact that I have to spend an hour searching to download a product I purchased is absurd.

    Direct Download Links for Adobe Software
    Mylenium

  • Acrobat 8 Pro quit working and I tried to reinstall and that doesn't work. [was:Question]

    My Acrobat 8 Pro quit working and I tried to reinstall and that doesn't work either. HELP

    Hi SwanArch,
    Please specify the OS along with the error message.
    Regards,
    Romit Sinha

  • Acrobat 9 pro seems to be damaging files, why?

    I tried searching for information. but haven't been able to find a prior discussion that helps.
    I have been using acrobat 9 pro on windows vista x64.  I build files by dragging and dropping pages from one file to another.  This is so that instead of having 12 files for a years worth of one bill, I have one.
    This has happened more than once, so I did a full scan of my hard drive looking for bad sectors in case the problem was the file being written onto a bad sector.
    What happens is that I open a file that has been fine and some of the pages are blank, both the thumbnail and the page.  When this has happened before each re-open produces more blank pages.
    The current file is 30,824 K.
    Any idea why this happens and what I can do to prevent it?

    I am not sure how to do this given what I am  doing. 
    Scenario 1:  I have scanned a bunch of pages into a single pdf file and at my leisure move the pages to different files.  Not sure how I would use insert pages in this situation.
    Scenario 2:  I open a monthly statement and move the pages into another file containing previous months statements.  Would I have to actually save the file first before I could follow your suggestion?
    Is there anyway of determining what fonts I need in order to check if I have them?
    Date: Mon, 25 May 2009 16:52:11 -0600
    From: [email protected]
    To: [email protected]
    Subject: acrobat 9 pro seems to be damaging files, why?
    To test the font issue, try using insert pages to add a file to another one rather than the drag and drop. There could be a bug in the latter, or just that fonts don't work well with that process, particularly if you do not have the fonts on your system.
    >

  • Adobe Acrobat XI Pro not working (at all) following update

    I have been have issues with my Adobe Acrobat XI Pro for a few weeks now.  It stopped allowing me to view, create and print pdfs a few weeks ago.  As I teach part time online at a university- I commonly use pdf's to provide information to my students.  I also use pdf's to transfer data back and for from my work computer - for my full time job - to my home computer and back again.  Not having this availability is really hindering my work.
    My computer runs on Windows 7 with a 64 bit operating system.  Up until a few weeks ago I had no problems.  I'm thinking an update may have gone through that caused the issues.
    In order to reload my full program I had to completely reformat one of my drives which I had remnants of an old adobe version on it- unfortunately, I did not realize that outlook was still pointing to this drive so I lost a lot of data in the long run- needless to say this adobe issue is has been more than just a nuisance to me.
    Once the drive was clean- I was able to reload my software for Adobe XI Pro. It worked perfectly after I loaded it.  At least I was able to breath a sigh of relief.  The next day (yesterday) I was informed that some security updates were needed on the program- considering the age of my disks- It seemed plausible and I received the updates.  This evening, as I was setting up my course for winter semester- I tried to open a pdf- and low and behold- I am back where I was- I can't do anything again.  What is going on here?  I need this program to work- yesterday!  Actually I needed it weeks ago when I started realizing I had issues.
    There has to be a fix out there for this problem- and I can't be the only one with this problem.  I would appreciate any suggestions that anyone has!
    Thank you!

    Bill-
    Thanks for the suggestion- but unfortunately this doesn't work- the reason being is that "Repair" is not option.
    I took a snapshot and attached it of what is available for me when I click on Adobe and as you can see- Repair is not an option.
    I'm getting to the point of frustration- I will probably uninstall adobe again and refuse to get any updates for it.  I honestly do not know what else to do.
    Without adobe I can't post assignments for my college students to my website.  Winter term starts tomorrow and I am very much behind schedule because of this problem.
    I can't be the only person having this issue.
    Again- I do appreciate the suggestion.  Wish it would have worked.

  • CS4 - Acrobat 9 Pro not working on Win 8.1

    Hello
    We have severe problems installing Acrobat 9 Pro from the CS4 Suite. Setup always cancels the installation (see Re: Error 1603 when installing CS4 on Windows 8.1).
    However, we downloaded and successfully installed a standalone version of Adobe Acrobat 9 Pro. But the CS4 serial does not work on the standalone version.
    Can you send us a serial number that works? We can provide you with the CS4 serial for verification. Please send us an address to send it to you privately.
    Thanks a lot!
    Simon Sunke

    Go to your Control Panel, find the Windows Firewall, after you open that, you need to click on Advanced settings. Click on Inbound Rules, scroll down until you see Java, it maybe listed several times. Right click on the ones that are blocked and select Properties.
    On the General tab, you will see a section called Action, you will need to tick the Allow the connection. Apply and then OK, do that for all blocked Java entries.
    EDIT: Sorry I missed where you said that it wasn't showing up. Are you looking in the "Inbound Rules"? If so, did you install the 32bit version? Even on a 64bit OS, you should have the 32bit installed. You can also always add the Java entry into
    the firewall setting. I will type out how to do that if you need.
    I tried to upload an image for you, but the site won't let me.
    Now if Java was the only thing not connecting, then you should be good to go, if you still have an issue with Java, then follow the steps again, but this time, you will need to open the Advanced tab and under the Profiles section, check the private box,
    apply and OK.

  • Adobe Acrobat X Pro Not Working, InDesign is Finicky

    I purchased CS6 a little while ago and now Adobe Acrobat X Pro is not working at all.  This is a major problem because I cannot access PDF files, which is the file type I use most.  Also, InDesign doesn't save my files correctly and sometimes just shuts down without notice.  I use those two programs the most so I'm not too sure what problems the other programs potentially have.  This same problem happened to my co-worker and she was emailed new download codes and now CS6 works perfectly for her.

    Hello emthree
    You will have to contact Adobe Support regarding this - http://helpx.adobe.com/in/contact.html
    ~Deepak

  • Trying to install Adobe Acrobat X Pro and it will not install.

    It says "the wizard was interrupted before Adobe Acrobat X Pro could be completely installed." Not sure what is interrupting the installation. It is a PC with Windows 7 64-bit. I tried installing twice already.

    Yes. My problem is fixed. I went through the forums and found a solution from user silvasilva3 .
    Running a check disk worked.
    Thanks

  • Dynamic stamp scripting which worked in Acrobat 9 Pro not working in Acrobat XI Pro

    I don't know JavaScript, so I am flying blind. I have recently updated to Acrobat XI Pro (on Win 7 Pro). I have had trouble setting up the same dynamic stamps that I had working in Acrobat 9. Just creating the stamps has been difficult, but the real pain has been trying to use the same scripting that I was using before. In particular, I have a field in which I want to enter details of a payment, such as cheque number. The script that worked before was:
    var cAsk = "Enter Payment Details" ;
    var cTitle = "Payment Details:  ";
    if(event.source.forReal && (event.source.stampName == "#X-MzCINchnGa7KblIGbv5C"))
      var cMsg = app.response(cAsk, cTitle);
      event.value = cMsg;
      event.source.source.info.exhibit = cMsg;
    The JavaScript debugger goes nuts about event.source being null and I am completely lost.
    Can anyone suggest a script which is likely to work for me? Is there any tutorial or similar material dealing with these issues in Acrobat XI Pro and in language that I am likely to understand?
    Thanks in advance.

    Change the start of the if-statement to:
    if (event.source && event.source.forReal && ...

  • My Acrobat 9 pro stopped working.  I do not have a hard copy of the download and need to be able to repair it.  How do I fix it?

    I purchased my Acrobat 9 pro as a digital download.  It just recently stopped working and I don't know how to repair it.  I need it up and running ASAP!!! Please help!

    Hi ewansgirl,
    To repair Acrobat you need to go to the 'Help' menu and select 'Repair Acrobat' installation.
    To download a copy of Acrobat 9 : Download Acrobat products | 9, 8
    Regards,
    Rave

  • Installation of Acrobat X Pro not working.

    I have a Mac OS X 10.8.5 I bought Acrobat X Pro along with CS5.5 When I try to open Acrobat, it will open and then close itself immediately. IS there a fix?

    I have a Mac OS X 10.8.5 I bought Acrobat X Pro along with CS5.5 When I try to open Acrobat, it will open and then close itself immediately. IS there a fix?

Maybe you are looking for

  • Problem with Socket Sever

    Hello, I have a problem with a java socket. I have a server application that generate random number. I my client application, I connected to server application and red the random number. My problem is in my application client only read one time. Afte

  • Using Key Figures from Other Info Provider without no Multiprovider

    Dear All. i have a requirement to calculate Cost / Ton, as for now our people are creating like that. GL Account Value , Total Sales Quantity, Total Production Quanity. Let say GL Account 1111 Total Sale is 90,000 Ton and Total Production is 80,000 T

  • Connecting database 11g to Oracle forms 6i.

    Hi guys, my previous question was: "Hi guys, basically, i am using the "run sql command line" from "Get Started With Oracle Database 11g Express Edition ". I have created a database within the command line and now am trying to open it Oracle forms 6i

  • HT3399 volume button doesn't work

    I don't know how but it looks like my funcion keys are disabled.  How do i turn them back on?  This is for a mac computer i have at work, i don't know if it's tiger, leopard or snow leapard.  pls advise.

  • Where are the Dreamweaver CS5 "assets" folders?

    I've had to clean reinstall Mavericks and am trying to find the assets (mainly snippet blocks of code to frequently reuse in website entries).  I can't seem to find them in my Time Machine backup.  What are the files named and where in what part of t