OCR Paper Capture not working.

Hello,
I am trying to use the local OCR scan and I am having issues getting it work. This is on Acrobat 9 Standard.
It was working fine, and I can not think of any software that was installed that would effect this plug in. Here is a image of the exact message I get. http://i.imgur.com/J9dZg.jpg
What I have done
I have followed the KB article, http://kb2.adobe.com/cps/402/kb402063.html - No success
I have repaired, then completely removed and reinstalled the program.
I have tried to rebuild/relink the dll using regsvr32 but no luck
The PaperCapture plugin is running but when I tried to use it, it fails with message above.
I do have a Fujutsu SnapScanner and I understand that can complicate things, but it was installed previously and worked fine.
Anyone have an idea what I can do to get this function working again?

Thank you for the tip, I will try scanning from a TIFF.
And the Scansnap may be unsupported with Acrobat, but I support an office of 60 people who all have a ScanSnap and run OCR scans with no problem.
The problem also occurs when I scan from our Keyocera Mita.

Similar Messages

Neuratron's Photoscope prevents Paper Capture from working

I have been using Acrobat 9 Professional for some time without any problems. I installed Sibelius5 with Neuratron's Photoscope a few weeks ago and Paper Capture simply stopped working. I tried repairing the installation, and finally uninstalled Acrobat and re-installed it to no avail. I have spent literally hours trying to fix this problem.
I finally did a search here on the Acrobat forums and found the post: http://forums.adobe.com/message/1178373#1178373
I found a copy of the Paper Capture driver drs832.dll located here: C:\Program Files\Adobe\Acrobat 9.0\Acrobat\plug_ins\PaperCapture and copied over the ******* version that Photoscope dumped in C:\Windows\System32. Now my Acrobat Paper Capture applications work perfectly once more.
I just wanted to share and prevent anyone from going through what I've gone through.
Acrobat ERROR Message encountered:
"Acrobat could not access the recognition service because: Unable to locate the Paper Capture recognition service. Your installation may be corrupt. This is probably due to either a low memory situation or a corrupt installation. If the problem is not clears up by shutting down other applications and/or rebooting, then please re-install Acrobat. Acrobat could not perform recognition (OCR) on this page because:"

Thanks for sharing.

Image capture not working in lion

Well! After 10 years or so of OS X my Kodak DC 5000 no longer works in image capture after upgrading to OS X Lion. After connecting the camera and trying to import images, Image Capture says "no device connected".
Went to the loca shop and using the same camera and cable, successfully imported picts to the desktop under Snow lepard, so I know it's not the camera or cable. Been a mac user for decades! never had a problem with "plug and play" until this update!
Do I need to get a card reader now? New camera? Not happening as long as this one works(ed). Already lost Photoshop, but didn't mind as I bought Pixelmator. However, the Image Capture not working is a showstopper. Is this Apple's version of Vista? Help please!

Yes, I have iPhoto 9.1.5, I also used the prefs and this still is not working. The upgrade to OS X Lion broke my driver and I am not able to do transfer any pics from the camera.
I assume I will now need to buy a card reader.

OCR Capture not working - Case Number:0186493066 - Still have not heard back

Your Case Number:0186493066
On March 30th I spent over 3 hours on two separate chats and screen shares with your tech team trying to fix the OCR problem. I was told my case was being elevated and I would hear back. It has been 8 days and I have not heard anything. If you read the notes on my file you will see I originally had Acrobat 9 Pro and updated to 11 Pro in order to get my OCR working properly. Since it was downloaded it has not worked. Two separate techs have tried several things some duplicate and have not been able to get it running. Please contact me asap to get this fixed.
We have tried uninstalling and re-installing, we have tried renaming files and copy and pasting them else where.
Here is the last i heard from anyone in our transcript from chat support call:
Shraha MUller: ok it installed
Ankit Verma: Now try to OCR the document.
Shraha MUller: still unable to locate the Paper Capture recognition service
Ankit Verma: Ok no issue's i am going to escalate the case.
Ankit Verma: The case has been escalated we will get back to you as soon as possible.
Shraha MUller: ok
Shraha MUller: So I wait for someone to call me?
Shraha MUller: or??
Ankit Verma: Yes.
Shraha MUller: lovely... thanks.
As you can see the name on our account was wrong and has been fixed several times. hopefully it is corrected now as well.
Thank you
Katie Gonzalez

nope I'm not saying that at all. I was delicately trying to suggest that you may have been mistaken, and that the audio preview in HDV log & capture was never there, not even before.
Audio Preview is a feature of the non HDV Log & Capture window
... try it. change your Easy Setup to DV/DVCPRO NTSC and then open Log & Capture . look familiar? this is the standard L&C tool and does indeed feature a Preview checkbox, for Audio, in the Clip Settings tab. now close the L&C window and then change your Easy Setup back to HDV, open up L&C again ... the Preview checkbox is not there ... my contention (although I may well be wrong!) is that it never was.

HP AiO on iOS7 document capture not working with iPad2?

Has anyone else found that the Document Capture does not work with the latest version of HP AiO Remote on iOS7? The app grumbles about "The document capture feature is only available if the camera on your iPad is over 5 megapixels" - any solutions to this problem as we have about 95 iPads out in the business that need to use this function regularly

Hi VijayJois,
I understand that you are getting an error message when trying to use the capture feature in HP's AiO Remote app.
The capture feature in the most recent version of the app will give the error message that you are seeing. A work around to this is to take a photo instead of using capture. The photo is now available in the AiO app in your camera roll to send to the printer, or send via email.
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

Why does my Wacom Bamboo Capture not work in Photoshop Elements 10?

I cannot use my electronic pen with photoshop elements ten. It came with tablet and is called bamboo capture and works good with its own software but won't work in photoshop. Help thanks.

It is possible that Elements is not made to support such a feature. You should ask this question in the product forum for which your problem applies. Try the Photoshop Elements forum:
http://forums.adobe.com/community/photoshop_elements?view=discussions

Image Capture not working with Canon LiDE 500F

Image Capture version 6.0.424 and CanoScan LiDE 500F 11.2.5.0 does not work properly.
Regardless the resolution, the resulted file has a very small size.
As a test I scanned a 9x20cm document at different resolutions and for all resulted files 'Get Info' reported small dimensions: 69x147 pixels. It is interesting that the size of the file varies with resolution, but when opened in Preview or Acrobat Reader, the small size is used.
As for other reports, CanoScan Toolbox works properly.
Regards,
Liviu

Hello Liviu,
There has been a couple of posts regarding the same issue with Image Capture. Have a look at this one for example.
http://discussions.apple.com/watches!add.jspa?forumID=1344&threadID=2272250
As I stated in this thread, I do not have this problem with Image Capture and my LiDE 200 or my MP980 AIO. So there must be something with the drivers used by these older model of Canon scanners when using Image Capture.
I haven't seen anyone provide a solution as yet so you may need to escalate this to Canon if you have a need to use Image Capture.
Pahu

Why does Batch Capture not work?

I have FCP 5+ installed on my new MacBook 15" Pro. Sony GVD 1000 deck. Fire wire.
It works fine except that I can not batch capture. When I execute the capture the tape rewinds to the IN point and then just plays. It does not seem to recognize the OUT point of the clip.
Capture NOW works fine but anythng else does not.
I have re-installed the program with negative improvement.
This system worked fune forever.
Thoughts anyone?
Ed

Sorry,
5.1, NTSC DV format.
This is a new install on a new machine. I also re-installed only FCP thinking that perhaps something went wrong with the original installl
I have just downloaded the last update 5.1.4 but have not tested it yet.
Also, although it will capture "NOW" the program will not recognize "play in point to out piont" button.
Thanks.

Preview Signature Capture Not Working

Having no luck getting the signature capture to work in Preview. I go through the appropriate steps, hold up my signature to the iSight camera, get a perfectly wonderful looking capture, click Accept, go back into my document, click on the icon and it acts is if no signature has been captured. Go to manage signatures and none are there. Even better, it keeps the indicator light on my iSight camera from turning off - even when I close out of Preview. Only solution I've found for getting the indicator light to quit is to restart the computer ( i5 MacBook Air). Have tried several different PDFs and all the same result.
Any thoughts? Running lates version of Lion (10.7.1). Obviously not the end of the world, but would definitely come in handy. Thanks.

Eytan Bernet1 wrote:
Go to ~/library/preferences
delete all the preview preferences while preview is quit.
Relaunch Preview, and it should be fixed.
This was close to the solution. I ended up needing to delete ~/Library/Containers/com.apple.Preview to ultimately fix the problem. Within the container was a separate set of preferences for Preview.app which were not aliased or symlinked to the set in ~/Library/Preferences.

Paper feed not working

Hello, Below are the sequence of events that happened and the problem I am facing: 1. I was able to use my HP 3510 printer print a page even 30 minutes ago. 2. After that, I tried scanning a page. The scanner got stuck many times. I opened the top lid of the printer and saw the scanner bar (I don't know how else to describe it) stuck in the middle. I restarted the printer and my computer and finally, after 6-7 retries, I was able to scan a page. Scanner has been working perfectly ever since. 3. After the scan was completed, I tried printing another page. The page feeder did not work. It showed me a "Out of paper. Load paper into the tray" message. I tried printing again by putting the page in more securely in the page feeder section but it showed the error again. I tried noticing what was happening and here is what I found out: a. The page was getting pulled into the printer. b. After the initial pull, the page stops once and the printer tries to pull in the paper again. But this time the paper gets pushed back out. When I look at the page, the top middle part (the end which was going into the printer first), is all crooked. ONLY the top middle part is crooked and the rest of the paper edge is the same. Every time I try to print a page, the same thing happens. The page is pulled in and then the print pushes it back the way the page came in and shows the "Out of paper" error. What can I do to fix this issue? Thanks.

Hi , Welcome to the HP Support Forums! I see you are running into some paper feed issues with your HP Deskjet 3510. Thank you for the detailed information. I would like you to go ahead and start troubleshooting here: HP Deskjet 3510 and HP Deskjet Ink Advantage 3510 e-All-in-One Printer Series - An 'Out of Paper' Error Message Displays on the Control Panel and the Printer Does Not Pick Up Paper Follow all steps listed above, focusing on the cleaning of the papers rollers. Let me know the outcome, I will watch for your reply. Thanks,

Screen capture not working.

For well over two years now by screen capture function does not work, the screen cross hair or full screen capture icons appear but after selection nothing shows on the desktop... Can someone help? I have upgraded several OS versions in this time. I've had a look through some forum answers but can't find a fix so opening this as a new discussion.

Hey... I was plugged into my 24" monitor and after unplugging it... everything works as normal... kinda weird... any other thoughts?

Image Capture not working anymore

I use Image Capture to get photos off my Canon XSi. Lately, it hasn't been working. Image Capture shows 26 CR2 icons (without the camera even being plugged in), but won't show their thumbnail previews. It won't download them, and I can't delete them, either. It also won't recognize any new photos I've taken with the camera when it is plugged in. The only thing I've done recently that might have caused this is I installed a new scanner (Epson V300). I've tried deleting the Epson scanner driver, deleting Image Capture's preferences, and even deleting Image Capture and reinstalling it using Pacifist. The 26 ghost icons still haunt me. Furthermore, I still have device windows for the Epson scanner (two of them, for some reason) even though I uninstalled all the Epson stuff. Any other ideas?

Yes, I have iPhoto 9.1.5, I also used the prefs and this still is not working. The upgrade to OS X Lion broke my driver and I am not able to do transfer any pics from the camera.
I assume I will now need to buy a card reader.

USB video capture not working

I'm having trouble with Skype recognizing USB video capture devices. I've been doing this for years and now can't seem to get it to work. I only do this every few months, so I might have missed a post. I have tried 4 different computers with 4 different USB capture devices, it would seem it;'s a Skype issue. Anyone else have some ideas? Will Skype repair the issue?
Thanks for your toughts!

This works for me. I have to do it every once in awhile after powering up my PC.
It may or may not work for you.
Open Windows Device Manager and for each Universal Serial Bus (USB) Host Controller right-click on it and then left-click on Properties. Ensure that the Device Status TextBox shows "This device is working properly." If not, Disable and Enable that USB Host Controller.

G4Ti4200-vtp video capture not working

anyone have problems when you capter the video and and when played back it has a bar in the middel of the screen.

;(
I\'ve got almost the same problem using the G4MX440-VT8X128 http://www.msicomputer.com/product/vga/vga_detail.asp?model=G4MX440-VT8X128.
There's a little bit difference on the problem, that is: on device manager, everything is OK, nothing red neither yellow.
When I try to capture, it captures only a blank movie / picture.
Did you make yours to work ?
Any hint to give me ?
P.S.: I\'ve tried with Windows Movie Maker and Virtual Dub, my WinProducer which came with the box bundled is not working properly, it (only winproducer) crashes during the boot (any hint about this also ?).

Pause FMR recording and video playback capture not working??

Hello!
I'm trying to record full motion recording in CAPTIVATE, but the PAUSE feature looks like it is not working for me. I even tried to modify the shortcut key, but nothing works. Anybody else have this trouble or am I missing something obvius here?? I thought that maybe the FMR mode cannot be PAUSED, but nothing on that matter can be found in the manual.
Also, I'm trying to produce e-learning content for PREMIERE and SOUNDBOOTH. I've noticed that video playback within PREMIERE is not captured by CAPTIVATE. I've seen on the forum that others had this issue. Is version 5 of captivate behaving the same? Is it still not possible to capture onscreen video playback?
Any info here would be greatly appreciated.
Thanks!

I'm having the same problem where Captivate 5 in FMR doesn't respond to the Pause key, however I'm noticing that there hasn't been a solution supplied here.
Is there another location/forum where Adobe representatives for Captivate are actively monitoring questions and problems for this product?
-- Sam

OCR Paper Capture not working.

Similar Messages

Maybe you are looking for