OCR resulting in Grainy Images and junk OCRd Data

Why is OCRing not working on my PDF? I have two PDFs produced by two different Tiff to PDF tools. Both produce seemingly good PDFs that Acrobat reader has no problem rendering. The process we use to OCR the PDF is to load it into Adobe Acrobat X and to run an action that has a single step - Recognize Text (using OCR). The Primary OCR Language is English (US) and the PDF Output Style is Searchable Image. The PDF from the old tool can be OCRd in Adobe Acrobat X without any problems (the image looks good and the OCRd text is suitable). It appears that Adobe deskews the images automatically. The PDF from the new tool cannot be OCRd in Adobe Acrobat X without incurring some problems (the image looks grainy, and the OCRd text is junk). It appears that Adobe DOES NOT deskew the images automatically. To overcome the grainyness of using this second tool, we've attempted to turn on the PDF Output Style of "Searchable Image (Exact)". This overcomes the grainyness issue, but doesn't help with the junk OCRd text at all.

Here's a copy of some sample PDFs (one from each of the two processes/tools)
https://www.evernote.com/shard/s88/sh/d9103207-13a4-41fd-8b8b-694630899556/84fc679ef050329 2c272310d4248c16e
The file size for the old tool is smaller than that of the new tool.
Message was edited by: tomcruise1981

Similar Messages

Acrobat OCR - differences between Searchable Image and CleanScan

Look at these differences. Both 600dpi
Searchable Image
http://img72.imageshack.us/img72/8061/acrobat1bh3.gif
CleanScan
http://img72.imageshack.us/img72/4690/acrobat2uj8.gif
CleanScan is very bad in this task. It totally ignores all the parts that are recognized by Searchable Image without any problems. Byut tt should be same!!!
At least, it should put text like image but it is ignored.
Why exist these differences there?
Is it bug?

A searchable image does not display the OCR, only the original image. The OCR is in the background and is what is searched. I am not familiar with the CleanScan that is apparently a new name in AA9 for the standard OCR where the image is replaced by the scanned data where it recognizes it. You may have an issue if you are using a US version with the language that is displayed in the original.
In short, what you see with searchable image is NOT what was recognized.

Acrobat Pro 9.5.0 crashes on ClearScan OCR but not Searchable Image OCR

I have Windows and Mac copies of Acrobat Pro 9.5 running on my computer (both version 9.5.0). My computer is an iMac running Mac OS X 10.7.3 (Lion) with the Parallels hypervisor, version 7.0.15055 installed, in which is running Windows XP. As at 11 April 2012, these versions are all the most recent version of the respective software.
When I try to apply OCR to a scanned image, and select ClearScan as the option, Acrobat Pro 9.5 (Mac) crashes but Acrobat Pro 9.5 (Windows) does not. When it crashes, Acrobat Pro 9.5 (Mac) produces a VERY long problem report which is sent back to Adobe.
In order to apply OCR to a scanned image in Acrobat Pro 9.5 (Mac), I am forced to change the OCR option from ClearScan to Searchable Image, but this results in a larger file.
I am aware of the thread at http://forums.adobe.com/thread/920032#4000947 but this has not helped, because I have reformatted the hard drive of my Mac (wiping out all remnants of previous versions of Acrobat), and reinstalled Acrobat Pro 9.5, but the problem persists.
Can anyone explain the different behaviour and offer a solution?

Acrobat 9 is not supported on MAC 10.7
Hence there is nothing much we can do about it. To use OCR functionality on MAC 10.7, please use Searchable Image else please upgrade to Acrobat 10.

Encrypted Disk Image and Backup

If one uses Apple’s Disk Utility to create an encrypted disk image, what happens when SuperDuper, Time Machine, or any other backup utility is running while the (unencrypted) image is mounted on the desktop?
Are both the encrypted image and the unencrypted data transferred to the backup device? Or is just the secure encrypted data copied to the destination?
Nothing urgent on this, just curious. Thank you!

I've played around with this a little. As best I can tell, when cloning an entire HD volume both CCC and SuperDuper will always copy an image file (.dmg, .sparsebundle, etc) that resides that on that HD, whether or not that file's disk image is mounted at the time. However the contents of the mounted disk image volume will not be copied separately, and so If the disk image is encrypted, no unencrypted content will get transferred this way. However as mentioned in the SuperDuper link above, it's better to unmount the image in any event, in order to ensure that the underlying .dmg or .sparsebundle file gets copied faithfully.
If you want to copy the contents of a mounted disk image with CCC or SuperDuper, you can do so as a completely separate procedure from copying the HD. If you first mount the image (giving a password if it was encrypted), that mounted image will appear as an independent volume in the "source list" of CCC or SuperDuper, and you can choose that volume as a source for the copy procedure. You would need to designate a different target volume as well, so as not to overwrite your HD clone. If the disk image was encrypted and you deliberately copy its mounted image separately in this fashion, the resulting files on the target will not be encrypted.

Grainy Still Images and Titles

I've just completed about a 10 minute film utilizing still images and video clips. It was made with the Adobe Premiere Elements 3 that came with my Sanyo Xacti camera, running on Windows XP. The video looks great all the way up until the end. I have two still images that I use that I have overlayed titles on them. The first one is a rolling title from bottom to top (like movie credits) and the second one is a still image where the text just appears and then disappears. The problem is that the pictures are extremely grainy and pixilated. Other still images that I use in the movie do not look that way, and they were taken with the same settings as the pixilated ones. When I pause the movie the picture looks normal, but when I hit PLAY it goes back to being grainy. I can only assume that the word overlays have something to do with it.
Has anyone else experienced this problem and is there any way to make the background pictures sharper and crisper with the text overlaying it?
Thank you.

Guys, thank you so much for the help so far. I really appreciate it.
Steve - The line above the stills is green. I have rendered the film and it looks fine in the view window except for the pictures in question.
Hunt - I exported the movie to a Windows media player file and played it on that. The results for those two pictures was the same.
I imported the images through the PE "Get Media From" tab. They were on a thumbdrive that I had imported the to from my camera.
They are both JPEG images. The first is 2816 pixels in width and 2112 pixels in height. With a vertical and horizontal resolution of 72 dpi and a bit depth of 24. The focal length was 6mm.
The second is 2112 pixels in width and 2816 in height. The rest of the info is the same.
The pictures look fine when it is paused, it is only when it is playing that they are grainy and unfocused.
Thanks for the help. I am continuing to work through the Help topics in search of an answer.
I'm making this as a gift for my girlfriend back in the states while I am deployed here in Iraq and I am trying to make it perfect. Thanks again for all of your help.

HP Photosmart Premium: photos print wet and with grainy image.

Photos print wet and image looks almost like a posterization; the color seems okay, but the image has a grainy patterns of tiny dots all over it.

What printer model - there are several different Photosmart Premium models? What program are you printing from? Are you using photo paper designed for inkjet printing? What are the driver settings for print quality and media type?
Web images are typically 72ppi, while for printing 200ppi or more is typically needed to prevent grainy images. Make sure the source photo's are of reasonable resolution.
If you are printing from a program such as Photoshop that gives an option of RGB or CMYK printing be sure to select RGB. While the printer inks are CMYK the driver is expecting RGB (or sRGB) source data. Printing with CMYK selected will result in very oversaturated prints.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

TS2518 Help, I had aperture open and working on a image and did not have a battery in and bumped the power off. As a result it will not open my master, it is locked. when I try to open that Library it says There was an error opening the database for the

Help, I had aperture open and working on a image and did not have a battery in and bumped the power off. As a result it will not open my master, it is locked. when I try to open that Library it says There was an error opening the database for the library. I have tried every thing. I updated the other libr but now it will not open the main to update. What do I do?

Try starting Aperture with the command and option keys held down. You'll get 3 options.
Try each, starting at the top, in order, checking after each to see if it fixes the issue.

Need software which can send images to my editor, have them make selections, share them with me so I can edit the images and send the final results back to them. Will Lightroom work?

Need software which can send images to my editor, have them make selections, share them with me so I can edit the images and send the final results back to them. Will Lightroom work?

What I would like to do is to use Lightroom as I have been doing with LR 5.7. Tag certain images to be shared to the Creative Cloud which my editor can then see and tag as to which she would like to see final versions of. In the best case, I would then see these tags and edit the images as appropriate and save the JPEGs back to the Cloud where she can download them for final production.
Possible?

In the evaluation mode im nt able to view my ocr result for more than 2 seconds

im doing my final year project on image processing using labview 2010(evaluation). im using a microsoft webcam(VX-700). my objective is character recognition using vision. im able to capture an image and store the same. the software also recognizes the characters after training the characters in vision assistance. but im not able to view the result string for more than 5 seconds. i really want to have some support regarding this issue. i've attached the program what i've used with this message. plz do help me with this issue asap.
Attachments:
OCR First Example with integrated2.vi ‏120 KB

Rudegar,
Our network is very stable and we aren't seeing any problems with anything else and besides, these worked fine until we did the update.
The wifi access point is in the same room about 6-8 ft. away and it's kind of hard to connect an appletv by ethernet to an iPad.
The appletv runs fine using it's built in applications, like Netflix, Disney, Radio, etc.
All of this makes me think it's not a wireless problem, but it's something in the appletv software after doing the update that won't hold the iPad connection.
I appreciate your suggestions and will pass your information along to our network person.
Any other ideas?
Thanks

HOW DO I RENDER A STILL IMAGE AND KEEP QUALITY

I'm still in search of help with why High Res. still pictures lose quality when I render. The images are at 300dpi, roughly 1900x1200 (they vary in size). I input them fine. Then, when I go to put them on the timeline - I get a pop-up window asking me to "AutoFix" this clip? When I say "yes" it drops down the quality and it becomes grainy. If I say "no" the clip remains looking the same - great.
But - then when I go to "render" that clip, in the timeline - it drops down in quality and becomes grainy - AFTER I render it.
HOW DO I USE STILL IMAGES - AND KEEP THEM HIGH QUALITY WHEN I RENDER?
My Project Settings are; 1920/1080 --- 30fps DROP frame (should it be Non-Drop?) -- Capture is HDV and Video Rendering is only marked at "Optimize Stills"
I'm using Adobe Premiere Elements 11 on a Windows 8 PC
Any help would be greatly appreciated
thanks

joeyMPI
OK. Let us give this a try. If I go off course anywhere along the line, please let me know.
1. Open Premiere Elements 11 on Windows 8 64 bit to the Expert workspace.
A. Under Edit Menu/Preferences/General
Remove the check mark next to "Show all do not show again messages."
Set the "Timeline render quality (valid for HD projects)" = "High quality, Slow speed"
Leave a check mark next to Default Scale to Frame Size.
B. Right Click the Edit area monitor, select Magnification and make sure it is = "Fit".
C. Right Click the Edit area monitor, select Playback Quality and make sure it is = "Highest".
D. Setting the Project Preset Manually to Get the Sharpest End Product Photo Display
Go to File Menu/New/Project and Change Settings
In Change Settings, change the project preset to
NTSC
DSLR
1080p
DSLR [email protected]
Close out of there.
In the new project dialog that appears, make sure that you have a check mark next to
"Force Select Project Setting on this Project". Close out of there.
E. The project preset that has been selected has a 16:9 aspect ratio, and it will direct the program to set
up a 16:9 space in the Edit area monitor for editing. So, best results are expected with photos with a 16:9 aspect ratio.
If an imported photo does not fill the Edit area monitor space, you can try to scale it (zoom in) just to the point of
getting rid of any black borders. A quick scale can be done by clicking on the monitor screen, and dragging on a handle
of the photo's bounding box which has appeared.
But, now for the moment of truth..
a. You should not have seen any helpful Fix messages.
b. If you render the Timeline content by clicking on the render button above the Timeline
what you see should look the same or better before and after the render.
Also keep in mind, that having to scale up too much can create pixelation.
300ppi or dpi has no significance in video. Pixel dimensions are the focus. And here, video is 4:3 or 16:9 aspect ratio. In
this specific case 16:9. It would be a good idea to plan ahead on the sizing of the photos beforehand. As far as I know the perk of enhanced
sharpness in the end product is associated with just the one project preset that I pointed to in the workflow.
But, right now, our target is on the maintaining the quality of the photos in the Edit area. And, I realize that you realize
that no matter how great the resolution of the imports, the imports will be reduced to the sizing characteristic of the export
preset.
We will be watching for your results. Thank you for considering the suggestions.
ATR

Grainy Image Quality

Have used iMovie 11 and iDVD to create hour long DVD's a few times over the last 6 months.   Not as I originally used to do it, but results were fair enough.
Have just tried to make a 5th DVD and found the picture quality was very grainy - Speckled.    It was as if the resolution was only a quarter of the pixels I would expect.
Initially I thought the movie length was too long - It was 1hr 9 mins, so I reduced the movie length.    I changed the quality from Best to Professional.    I ended up with just a 2 minute video (to cut down on the encoding time each time) but still the quality was really poor.
I made a disc image rather than burn a disc but no difference - The video quality and on-screen titles were pixeled and grainy.
Viewing the video through iMovie is crystal clear and beautiful quality.    Any ideas???

Hi I am new for this. I have Panasonic HDC-TM700. I burned a DVD from IDVD, the quality was poor. But friend of my used HD Writer (disc come with HDC-TM 700) to burn a DVD. That result was very good and clear pix on HDTV too. In order to make a good movie, I wonder if we can us Mac to edit and other program to burn....so we can share movies with family and friends.

Missing Images and CSS when going to portal/server.pt can't login

Hi,
I installed WebCenterInteraction_10.3.0.0.0 on Windows and followed all the steps mentioned in the install doc. Deployed the portal.ear and here is what I see on the command line after deployment:
Task #1 (InitPortalObjects) END (OK)
Task #2 (CheckDevKit) END (OK)
Task #3 (InitializePaths) END (OK)
Task #4 (InitializeApplication) END (OK)
Task #5 (InitializeAppWarmUpHelper) END (OK)
Task #6 (InitializeImageServerHelper) END (OK)
Task #7 (InitializeConfigHelper) END (OK)
Task #8 (InitializeResourceManager) END (OK)
Task #9 (LoadVersionHelper) END (OK)
Task #10 (InitializeActivitySpaces) END (OK)
Task #11 (InitializeVarPacks) END (OK)
Task #12 (InitializeImageServerHelperPartII) END (OK)
Task #13 (InitializeObjects) END (OK)
Task #14 (LoadCustomLoads) END (OK)
Task #15 (CheckDBVersion) END (OK)
Aqualogic Interaction startup successful.
    ======= Diagnostic Run Complete =======
    Startup completion percentage: 100% (50 steps out of 50 complete)
    ===== Portal should now start successfully ===== But when I go to http://localhost:7001/portal/server.pt I don't see any images and the css is not applied so can't login. Any idea what might be wrong. Here is the Apache httpd.conf
Include "C:/bea/alui/plumtreeconf/"
# Based upon the NCSA server configuration files originally by Rob McCool.
# This is the main Apache server configuration file. It contains the
# configuration directives that give the server its instructions.
# See <URL:http://httpd.apache.org/docs/2.0/> for detailed information about
# the directives.
# Do NOT simply read the instructions in here without understanding
# what they do. They're here only as hints or reminders. If you are unsure
# consult the online docs. You have been warned.
# The configuration directives are grouped into three basic sections:
# 1. Directives that control the operation of the Apache server process as a
#     whole (the 'global environment').
# 2. Directives that define the parameters of the 'main' or 'default' server,
#     which responds to requests that aren't handled by a virtual host.
#     These directives also provide default values for the settings
#     of all virtual hosts.
# 3. Settings for virtual hosts, which allow Web requests to be sent to
#     different IP addresses or hostnames and have them handled by the
#     same Apache server process.
# Configuration and logfile names: If the filenames you specify for many
# of the server's control files begin with "/" (or "drive:/" for Win32), the
# server will use that explicit path. If the filenames do *not* begin
# with "/", the value of ServerRoot is prepended -- so "logs/foo.log"
# with ServerRoot set to "C:/Program Files/Apache Group/Apache2" will be interpreted by the
# server as "C:/Program Files/Apache Group/Apache2/logs/foo.log".
# NOTE: Where filenames are specified, you must use forward slashes
# instead of backslashes (e.g., "c:/apache" instead of "c:\apache").
# If a drive letter is omitted, the drive on which Apache.exe is located
# will be used by default. It is recommended that you always supply
# an explicit drive letter in absolute paths, however, to avoid
# confusion.
### Section 1: Global Environment
# The directives in this section affect the overall operation of Apache,
# such as the number of concurrent requests it can handle or where it
# can find its configuration files.
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
# NOTE! If you intend to place this on an NFS (or otherwise network)
# mounted filesystem then please read the LockFile documentation (available
# at <URL:http://httpd.apache.org/docs/2.0/mod/mpm_common.html#lockfile>);
# you will save yourself a lot of trouble.
# Do NOT add a slash at the end of the directory path.
ServerRoot "C:/Program Files/Apache Group/Apache2"
# ScoreBoardFile: File used to store internal server process information.
# If unspecified (the default), the scoreboard will be stored in an
# anonymous shared memory segment, and will be unavailable to third-party
# applications.
# If specified, ensure that no two invocations of Apache share the same
# scoreboard file. The scoreboard file MUST BE STORED ON A LOCAL DISK.
#ScoreBoardFile logs/apache_runtime_status
# PidFile: The file in which the server should record its process
# identification number when it starts.
PidFile logs/httpd.pid
# Timeout: The number of seconds before receives and sends time out.
Timeout 300
# KeepAlive: Whether or not to allow persistent connections (more than
# one request per connection). Set to "Off" to deactivate.
KeepAlive On
# MaxKeepAliveRequests: The maximum number of requests to allow
# during a persistent connection. Set to 0 to allow an unlimited amount.
# We recommend you leave this number high, for maximum performance.
MaxKeepAliveRequests 100
# KeepAliveTimeout: Number of seconds to wait for the next request from the
# same client on the same connection.
KeepAliveTimeout 15
## Server-Pool Size Regulation (MPM specific)
# WinNT MPM
# ThreadsPerChild: constant number of worker threads in the server process
# MaxRequestsPerChild: maximum number of requests a server process serves
<IfModule mpm_winnt.c>
ThreadsPerChild 250
MaxRequestsPerChild 0
</IfModule>
# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports, instead of the default. See also the <VirtualHost>
# directive.
# Change this to Listen on specific IP addresses as shown below to
# prevent Apache from glomming onto all bound IP addresses (0.0.0.0)
#Listen 12.34.56.78:80
# Listen 80
Listen 80
# Dynamic Shared Object (DSO) Support
# To be able to use the functionality of a module which was built as a DSO you
# have to place corresponding `LoadModule' lines at this location so the
# directives contained in it are actually available _before_ they are used.
# Statically compiled modules (those listed by `httpd -l') do not need
# to be loaded here.
# Example:
# LoadModule foo_module modules/mod_foo.so
LoadModule access_module modules/mod_access.so
LoadModule actions_module modules/mod_actions.so
LoadModule alias_module modules/mod_alias.so
LoadModule asis_module modules/mod_asis.so
LoadModule auth_module modules/mod_auth.so
#LoadModule auth_anon_module modules/mod_auth_anon.so
#LoadModule auth_dbm_module modules/mod_auth_dbm.so
#LoadModule auth_digest_module modules/mod_auth_digest.so
LoadModule autoindex_module modules/mod_autoindex.so
#LoadModule cern_meta_module modules/mod_cern_meta.so
LoadModule cgi_module modules/mod_cgi.so
#LoadModule dav_module modules/mod_dav.so
#LoadModule dav_fs_module modules/mod_dav_fs.so
LoadModule dir_module modules/mod_dir.so
LoadModule env_module modules/mod_env.so
#LoadModule expires_module modules/mod_expires.so
#LoadModule file_cache_module modules/mod_file_cache.so
#LoadModule headers_module modules/mod_headers.so
LoadModule imap_module modules/mod_imap.so
LoadModule include_module modules/mod_include.so
#LoadModule info_module modules/mod_info.so
LoadModule isapi_module modules/mod_isapi.so
LoadModule log_config_module modules/mod_log_config.so
LoadModule mime_module modules/mod_mime.so
#LoadModule mime_magic_module modules/mod_mime_magic.so
#LoadModule proxy_module modules/mod_proxy.so
#LoadModule proxy_connect_module modules/mod_proxy_connect.so
#LoadModule proxy_http_module modules/mod_proxy_http.so
#LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
LoadModule negotiation_module modules/mod_negotiation.so
#LoadModule rewrite_module modules/mod_rewrite.so
LoadModule setenvif_module modules/mod_setenvif.so
#LoadModule speling_module modules/mod_speling.so
#LoadModule status_module modules/mod_status.so
#LoadModule unique_id_module modules/mod_unique_id.so
LoadModule userdir_module modules/mod_userdir.so
#LoadModule usertrack_module modules/mod_usertrack.so
#LoadModule vhost_alias_module modules/mod_vhost_alias.so
#LoadModule ssl_module modules/mod_ssl.so
LoadModule weblogic_module modules/mod_wl_20.so
# ExtendedStatus controls whether Apache will generate "full" status
# information (ExtendedStatus On) or just basic information (ExtendedStatus
# Off) when the "server-status" handler is called. The default is Off.
#ExtendedStatus On
### Section 2: 'Main' server configuration
# The directives in this section set up the values used by the 'main'
# server, which responds to any requests that aren't handled by a
# <VirtualHost> definition. These values also provide defaults for
# any <VirtualHost> containers you may define later in the file.
# All of these directives may appear inside <VirtualHost> containers,
# in which case these default settings will be overridden for the
# virtual host being defined.
# ServerAdmin: Your address, where problems with the server should be
# e-mailed. This address appears on some server-generated pages, such
# as error documents. e.g. [email protected]
ServerAdmin [email protected]
# ServerName gives the name and port that the server uses to identify itself.
# This can often be determined automatically, but we recommend you specify
# it explicitly to prevent problems during startup.
# If this is not set to valid DNS name for your host, server-generated
# redirections will not work. See also the UseCanonicalName directive.
# If your host doesn't have a registered DNS name, enter its IP address here.
# You will have to access it by its address anyway, and this will make
# redirections work in a sensible way.
ServerName localhost:80
# UseCanonicalName: Determines how Apache constructs self-referencing
# URLs and the SERVER_NAME and SERVER_PORT variables.
# When set "Off", Apache will use the Hostname and Port supplied
# by the client. When set "On", Apache will use the value of the
# ServerName directive.
UseCanonicalName Off
# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory, but
# symbolic links and aliases may be used to point to other locations.
DocumentRoot "C:/Program Files/Apache Group/Apache2/htdocs"
# Each directory to which Apache has access can be configured with respect
# to which services and features are allowed and/or disabled in that
# directory (and its subdirectories).
# First, we configure the "default" to be a very restrictive set of
# features.
<Directory />
    Options FollowSymLinks
    AllowOverride None
</Directory>
# Note that from this point forward you must specifically allow
# particular features to be enabled - so if something's not working as
# you might expect, make sure that you have specifically enabled it
# below.
# This should be changed to whatever you set DocumentRoot to.
<Directory "C:/Program Files/Apache Group/Apache2/htdocs">
# Possible values for the Options directive are "None", "All",
# or any combination of:
#   Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
# Note that "MultiViews" must be named *explicitly* --- "Options All"
# doesn't give it to you.
# The Options directive is both complicated and important. Please see
# http://httpd.apache.org/docs/2.0/mod/core.html#options
# for more information.
    Options Indexes FollowSymLinks
# AllowOverride controls what directives may be placed in .htaccess files.
# It can be "All", "None", or any combination of the keywords:
#   Options FileInfo AuthConfig Limit
    AllowOverride None
# Controls who can get stuff from this server.
    Order allow,deny
    Allow from all
</Directory>
# UserDir: The name of the directory that is appended onto a user's home
# directory if a ~user request is received. Be especially careful to use
# proper, forward slashes here. On Windows NT, "Personal/My Website"
# is a more appropriate choice.
UserDir "My Documents/My Website"
# Control access to UserDir directories. The following is an example
# for a site where these directories are restricted to read-only.
# You must correct the path for the root to match your system's configured
# user directory location, e.g. "C:/WinNT/profiles/*/My Documents/My Website"
# or whichever, as appropriate.
#<Directory "C:/Documents and Settings/*/My Documents/My Website">
#    AllowOverride FileInfo AuthConfig Limit
#    Options MultiViews Indexes SymLinksIfOwnerMatch IncludesNoExec
#    <Limit GET POST OPTIONS PROPFIND>
#        Order allow,deny
#        Allow from all
#    </Limit>
#    <LimitExcept GET POST OPTIONS PROPFIND>
#        Order deny,allow
#        Deny from all
#    </LimitExcept>
#</Directory>
# DirectoryIndex: sets the file that Apache will serve if a directory
# is requested.
# The index.html.var file (a type-map) is used to deliver content-
# negotiated documents. The MultiViews Option can be used for the
# same purpose, but it is much slower.
DirectoryIndex index.html index.html.var
# AccessFileName: The name of the file to look for in each directory
# for additional configuration directives. See also the AllowOverride
# directive.
AccessFileName .htaccess
# The following lines prevent .htaccess and .htpasswd files from being
# viewed by Web clients.
<FilesMatch "^\.ht">
    Order allow,deny
    Deny from all
</FilesMatch>
# TypesConfig describes where the mime.types file (or equivalent) is
# to be found.
TypesConfig conf/mime.types
# DefaultType is the default MIME type the server will use for a document
# if it cannot otherwise determine one, such as from filename extensions.
# If your server contains mostly text or HTML documents, "text/plain" is
# a good value. If most of your content is binary, such as applications
# or images, you may want to use "application/octet-stream" instead to
# keep browsers from trying to display binary files as though they are
# text.
DefaultType text/plain
# The mod_mime_magic module allows the server to use various hints from the
# contents of the file itself to determine its type. The MIMEMagicFile
# directive tells the module where the hint definitions are located.
<IfModule mod_mime_magic.c>
    MIMEMagicFile conf/magic
</IfModule>
# HostnameLookups: Log the names of clients or just their IP addresses
# e.g., www.apache.org (on) or 204.62.129.132 (off).
# The default is off because it'd be overall better for the net if people
# had to knowingly turn this feature on, since enabling it means that
# each client request will result in AT LEAST one lookup request to the
# nameserver.
HostnameLookups Off
# EnableMMAP: Control whether memory-mapping is used to deliver
# files (assuming that the underlying OS supports it).
# The default is on; turn this off if you serve from NFS-mounted
# filesystems. On some systems, turning it off (regardless of
# filesystem) can improve performance; for details, please see
# http://httpd.apache.org/docs/2.0/mod/core.html#enablemmap
#EnableMMAP off
# EnableSendfile: Control whether the sendfile kernel support is
# used to deliver files (assuming that the OS supports it).
# The default is on; turn this off if you serve from NFS-mounted
# filesystems. Please see
# http://httpd.apache.org/docs/2.0/mod/core.html#enablesendfile
#EnableSendfile off
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here. If you *do* define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
ErrorLog logs/error.log
# LogLevel: Control the number of messages logged to the error.log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
LogLevel warn
# The following directives define some format nicknames for use with
# a CustomLog directive (see below).
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
LogFormat "%h %l %u %t \"%r\" %>s %b" common
LogFormat "%{Referer}i -> %U" referer
LogFormat "%{User-agent}i" agent
# You need to enable mod_logio.c to use %I and %O
#LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
# The location and format of the access logfile (Common Logfile Format).
# If you do not define any access logfiles within a <VirtualHost>
# container, they will be logged here. Contrariwise, if you *do*
# define per-<VirtualHost> access logfiles, transactions will be
# logged therein and *not* in this file.
CustomLog logs/access.log common
# If you would like to have agent and referer logfiles, uncomment the
# following directives.
#CustomLog logs/referer.log referer
#CustomLog logs/agent.log agent
# If you prefer a single logfile with access, agent, and referer information
# (Combined Logfile Format) you can use the following directive.
#CustomLog logs/access.log combined
# ServerTokens
# This directive configures what you return as the Server HTTP response
# Header. The default is 'Full' which sends information about the OS-Type
# and compiled in modules.
# Set to one of: Full | OS | Minor | Minimal | Major | Prod
# where Full conveys the most information, and Prod the least.
ServerTokens Full
# Optionally add a line containing the server version and virtual host
# name to server-generated pages (internal error documents, FTP directory
# listings, mod_status and mod_info output etc., but not CGI generated
# documents or custom error documents).
# Set to "EMail" to also include a mailto: link to the ServerAdmin.
# Set to one of: On | Off | EMail
ServerSignature On
# Aliases: Add here as many aliases as you need (with no limit). The format is
# Alias fakename realname
# Note that if you include a trailing / on fakename then the server will
# require it to be present in the URL. So "/icons" isn't aliased in this
# example, only "/icons/". If the fakename is slash-terminated, then the
# realname must also be slash terminated, and if the fakename omits the
# trailing slash, the realname must also omit it.
# We include the /icons/ alias for FancyIndexed directory listings. If you
# do not use FancyIndexing, you may comment this out.
Alias /icons/ "C:/Program Files/Apache Group/Apache2/icons/"
<Directory "C:/Program Files/Apache Group/Apache2/icons">
    Options Indexes MultiViews
    AllowOverride None
    Order allow,deny
    Allow from all
</Directory>
# This should be changed to the ServerRoot/manual/. The alias provides
# the manual, even if you choose to move your DocumentRoot. You may comment
# this out if you do not care for the documentation.
AliasMatch ^/manual(?:/(?:de|en|es|fr|ja|ko|ru))?(/.*)?$ "C:/Program Files/Apache Group/Apache2/manual$1"
<Directory "C:/Program Files/Apache Group/Apache2/manual">
    Options Indexes
    AllowOverride None
    Order allow,deny
    Allow from all
    <Files *.html>
        SetHandler type-map
    </Files>
    SetEnvIf Request_URI ^/manual/(de|en|es|fr|ja|ko|ru)/ prefer-language=$1
    RedirectMatch 301 ^/manual(?:/(de|en|es|fr|ja|ko|ru)){2,}(/.*)?$ /manual/$1$2
</Directory>
# ScriptAlias: This controls which directories contain server scripts.
# ScriptAliases are essentially the same as Aliases, except that
# documents in the realname directory are treated as applications and
# run by the server when requested rather than as documents sent to the client.
# The same rules about trailing "/" apply to ScriptAlias directives as to
# Alias.
ScriptAlias /cgi-bin/ "C:/Program Files/Apache Group/Apache2/cgi-bin/"
# "C:/Program Files/Apache Group/Apache2/cgi-bin" should be changed to whatever your ScriptAliased
# CGI directory exists, if you have that configured.
<Directory "C:/Program Files/Apache Group/Apache2/cgi-bin">
    AllowOverride None
    Options None
    Order allow,deny
    Allow from all
</Directory>
# Redirect allows you to tell clients about documents which used to exist in
# your server's namespace, but do not anymore. This allows you to tell the
# clients where to look for the relocated document.
# Example:
# Redirect permanent /foo http://www.example.com/bar
# Directives controlling the display of server-generated directory listings.
# IndexOptions: Controls the appearance of server-generated directory
# listings.
IndexOptions FancyIndexing VersionSort
# AddIcon* directives tell the server which icon to show for different
# files or filename extensions. These are only displayed for
# FancyIndexed directories.
AddIconByEncoding (CMP,/icons/compressed.gif) x-compress x-gzip
AddIconByType (TXT,/icons/text.gif) text/*
AddIconByType (IMG,/icons/image2.gif) image/*
AddIconByType (SND,/icons/sound2.gif) audio/*
AddIconByType (VID,/icons/movie.gif) video/*
AddIcon /icons/binary.gif .bin .exe
AddIcon /icons/binhex.gif .hqx
AddIcon /icons/tar.gif .tar
AddIcon /icons/world2.gif .wrl .wrl.gz .vrml .vrm .iv
AddIcon /icons/compressed.gif .Z .z .tgz .gz .zip
AddIcon /icons/a.gif .ps .ai .eps
AddIcon /icons/layout.gif .html .shtml .htm .pdf
AddIcon /icons/text.gif .txt
AddIcon /icons/c.gif .c
AddIcon /icons/p.gif .pl .py
AddIcon /icons/f.gif .for
AddIcon /icons/dvi.gif .dvi
AddIcon /icons/uuencoded.gif .uu
AddIcon /icons/script.gif .conf .sh .shar .csh .ksh .tcl
AddIcon /icons/tex.gif .tex
AddIcon /icons/bomb.gif core
AddIcon /icons/back.gif ..
AddIcon /icons/hand.right.gif README
AddIcon /icons/folder.gif ^^DIRECTORY^^
AddIcon /icons/blank.gif ^^BLANKICON^^
# DefaultIcon is which icon to show for files which do not have an icon
# explicitly set.
DefaultIcon /icons/unknown.gif
# AddDescription allows you to place a short description after a file in
# server-generated indexes. These are only displayed for FancyIndexed
# directories.
# Format: AddDescription "description" filename
#AddDescription "GZIP compressed document" .gz
#AddDescription "tar archive" .tar
#AddDescription "GZIP compressed tar archive" .tgz
# ReadmeName is the name of the README file the server will look for by
# default, and append to directory listings.
# HeaderName is the name of a file which should be prepended to
# directory indexes.
ReadmeName README.html
HeaderName HEADER.html
# IndexIgnore is a set of filenames which directory indexing should ignore
# and not include in the listing. Shell-style wildcarding is permitted.
IndexIgnore .??* *~ *# HEADER* README* RCS CVS *,v *,t
# DefaultLanguage and AddLanguage allows you to specify the language of
# a document. You can then use content negotiation to give a browser a
# file in a language the user can understand.
# Specify a default language. This means that all data
# going out without a specific language tag (see below) will
# be marked with this one. You probably do NOT want to set
# this unless you are sure it is correct for all cases.
# * It is generally better to not mark a page as
# * being a certain language than marking it with the wrong
# * language!
# DefaultLanguage nl
# Note 1: The suffix does not have to be the same as the language
# keyword --- those with documents in Polish (whose net-standard
# language code is pl) may wish to use "AddLanguage pl .po" to
# avoid the ambiguity with the common suffix for perl scripts.
# Note 2: The example entries below illustrate that in some cases
# the two character 'Language' abbreviation is not identical to
# the two character 'Country' code for its country,
# E.g. 'Danmark/dk' versus 'Danish/da'.
# Note 3: In the case of 'ltz' we violate the RFC by using a three char
# specifier. There is 'work in progress' to fix this and get
# the reference data for rfc1766 cleaned up.
# Catalan (ca) - Croatian (hr) - Czech (cs) - Danish (da) - Dutch (nl)
# English (en) - Esperanto (eo) - Estonian (et) - French (fr) - German (de)
# Greek-Modern (el) - Hebrew (he) - Italian (it) - Japanese (ja)
# Korean (ko) - Luxembourgeois* (ltz) - Norwegian Nynorsk (nn)
# Norwegian (no) - Polish (pl) - Portugese (pt)
# Brazilian Portuguese (pt-BR) - Russian (ru) - Swedish (sv)
# Simplified Chinese (zh-CN) - Spanish (es) - Traditional Chinese (zh-TW)
AddLanguage ca .ca
AddLanguage cs .cz .cs
AddLanguage da .dk
AddLanguage de .de
AddLanguage el .el
AddLanguage en .en
AddLanguage eo .eo
AddLanguage es .es
AddLanguage et .et
AddLanguage fr .fr
AddLanguage he .he
AddLanguage hr .hr
AddLanguage it .it
AddLanguage ja .ja
AddLanguage ko .ko
AddLanguage ltz .ltz
AddLanguage nl .nl
AddLanguage nn .nn
AddLanguage no .no
AddLanguage pl .po
AddLanguage pt .pt
AddLanguage pt-BR .pt-br
AddLanguage ru .ru
AddLanguage sv .sv
AddLanguage zh-CN .zh-cn
AddLanguage zh-TW .zh-tw
# LanguagePriority allows you to give precedence to some languages
# in case of a tie during content negotiation.
# Just list the languages in decreasing order of preference. We have
# more or less alphabetized them here. You probably want to change this.
LanguagePriority en ca cs da de el eo es et fr he hr it ja ko ltz nl nn no pl pt pt-BR ru sv zh-CN zh-TW
# ForceLanguagePriority allows you to serve a result page rather than
# MULTIPLE CHOICES (Prefer) [in case of a tie] or NOT ACCEPTABLE (Fallback)
# [in case no accepted languages matched the available variants]
ForceLanguagePriority Prefer Fallback
# Commonly used filename extensions to character sets. You probably
# want to avoid clashes with the language extensions, unless you
# are good at carefully testing your setup after each change.
# See http://www.iana.org/assignments/character-sets for the
# official list of        .utf7
AddCharset utf-8       .utf8
AddCharset big5        .big5 .b5
AddCharset EUC-TW      .euc-tw
AddCharset EUC-JP      .euc-jp
AddCharset EUC-KR      .euc-kr
AddCharset shift_jis   .sjis
# AddType allows you to add to or override the MIME configuration
# file mime.types for specific file types.
#AddType application/x-tar .tgz
# AddEncoding allows you to have certain browsers (Mosaic/X 2.1+) uncompress
# information on the fly. Note: Not all browsers support this.
# Despite the name similarity, the following Add* directives have nothing
# to do with the FancyIndexing customization directives above.
#AddEncoding x-compress .Z
#AddEncoding x-gzip .gz .tgz
# If the AddEncoding directives above are commented-out, then you
# probably should define those extensions to indicate media types:
AddType application/x-compress .Z
AddType application/x-gzip .gz .tgz
# AddHandler allows you to map certain file extensions to "handlers":
# actions unrelated to filetype. These can be either built into the server
# or added with the Action directive (see below)
# To use CGI scripts outside of ScriptAliased directories:
# (You will also need to add "ExecCGI" to the "Options" directive.)
#AddHandler cgi-script .cgi
# For files that include their own HTTP headers:
#AddHandler send-as-is asis
# For server-parsed imagemap files:
#AddHandler imap-file map
# For type maps (negotiated resources):
# (This is enabled by default to allow the Apache "It Worked" page
# to be distributed in multiple languages.)
AddHandler type-map var
# Filters allow you to process content before it is sent to the client.
# To parse .shtml files for server-side includes (SSI):
# (You will also need to add "Includes" to the "Options" directive.)
#AddType text/html .shtml
#AddOutputFilter INCLUDES .shtml
# Action lets you define media types that will execute a script whenever
# a matching file is called. This eliminates the need for repeated URL
# pathnames for oft-used CGI file processors.
# Format: Action media/type /cgi-script/location
# Format: Action handler-name /cgi-script/location
# Customizable error responses come in three flavors:
# 1) plain text 2) local redirects 3) external

I am not expert in these, but please check out the following things and see whether it would solve your issue. (All these changes can be easily rolled back in case I'm wrong :). So make note of what you do)
As per your httpd.conf, you have chosen an automatic configuration of Apache by OWCI installer itself. What it does is create an imageserver.conf file in a separate directory and these settings will be included in your httpd.conf as you can see in the first line: Include "C:/bea/alui/plumtreeconf/".
If you check the imageserver.conf in that location, you would find a line like: Alias /imageserver/ "C:/bea/alui/ptimages/imageserver/". This aliases the original path "C:/bea/alui/ptimages/imageserver/" to /imageserver"
To confirm whether this is done right, check the following:
1. Acces 'http://<server ip / server name / localhost >/' from your browser
This should display the Apache home page (as per your httpd.conf, it uses the default port 80; so no port number required)
2. Access 'http://<server ip>/imageserver/' from your browser
This should display the directory structure (if its not disabled) inside your 'C:/bea/alui/ptimages/imageserver/' folder. Also confirm that all the subfolders are accessible.
3. If all the above is right, it means that your imageserver settings are right. Please check your portalconfig.xml for the correct settings: For example, <setting name="HTTPPort"> should be 7001 in your case. If its something else, change it and restart Weblogic for the settings to take effect.
Hope this helps.

Desktop Image and Screensaver: doesn't work

I can not change my desktop image, and my screensaver won't start.
I was playing around in Desktop Preferences tonight, setting different speeds for the iTunes Artwork screensaver to see how it'd look, and suddenly, System Preferences just crashed on me. I wasn't doing ANYTHING strange, just playing with the options of the original screensavers that came with my computer, which is brand new. I don't have any third party screensavers loaded on my machine. The desktop image was one I made myself, with Photoshop. I have absolutely no idea why it's acting this way.
Even stranger, out of curiosity, I created a second user account and tried the screen saver while logged in the second account. The screensaver worked just fine. But still nothing in my main account. Any ideas?
When I try Desktop Images and Screensaver now (within System Preferences), it CRASHES on me. I get this error message:
"The application System Preferences quit unexpectantly.
Mac OS X and other applications are not affected.
Click Reopen to open the application again. Click Report to see more details or send a report to Apple."
If I reopen it again, I get the same thing. The second error dialog will always have the option to "try again." If I try again, I can actually open the Desktop Images and Screensavers window. I can't change anything, however. If I try changing something, I get the following message:
"System Preferences -- New Settings
New settings have been created for this application. Do you wish to use these settings from now on?"
With two buttons for yes or no. However, no matter which button I select, I get the same results.
I've run OSX through Jaguar and Panther, so it's not like I'm a new user who just clicked the wrong thing. I'm seriously stumped here. Can anyone help? I'm a little worried about this.... Thanks.
Dual Core Intel Mac Mini Mac OS X (10.4.6)

THANK YOU!!!! Yes, it was the preferences in my library causing the problems. I just deleted the screensaver preferences, and that fixed all the problems, including the desktop image problem.
I also think that maybe an alarm clock program I downloaded called Aurora may have been partly to blame. I had Aurora authorized to wake my computer from sleep, even though I had password protection enabled. This might have conflicted with the screensaver somehow, dunno.... Let me know if any of you are successfully using Aurora without any problems, and I will reinstall it. But for now, that program is off my system.
Anyways, thanks a load. You guys are all very helpful. -- Dean

How do I save image and text as a single image in InDesign CS5.0?

How do I save an image and text as one image in InDesign CS5.0? NOT 5.5.
I need to save the image as a 72-dpi, jpg file for ePub purposes. I designed a book and am handing it off to someone for ePub.
This is what I've tried:
1) Copied from InDesign, pasted into a PhotoShop doc as a Smart Object. Saved it as 72 dpi jpg, then imported back into ID.
2) Took a screenshot of ID page, placed it in PS, saved as 72 dpi, imported into ID
3) Saved page as a PDF from InDesign, then saved PDF as 72 dpi jpg, then imported into ID.
4) Save page as a PDF from InDesign, placed into Photoshop and saved
as 72 dpi, then imported into ID.
5) Saved as an EPS from InDesign, placed in PS, then imported back to ID.
In all cases, the type looks terrible. It doesn't seem to matter whether I copy or place into Photoshop, though placing is slightly better.
HELP!!!

In all cases, the type looks terrible. It doesn't seem to matter whether I copy or place into Photoshop, though placing is slightly better.
Naturally what you did will result in rasterized text. Did you preview with high quality settings?
Are you sure the people who will handle that downstream need pixel images and do you have the exact pixel dimensions needed?
Why did you place the image back in Indesign, by the way?

Can you auto-load images in junk mail?

Am I wrong in thinking that once you could make a choice to load images automatically when opening junk mail? Can you now?

No, there is not. It wouldn't be reliable or useful. If Mail filters it as junk, presumably you won't be opening it, and thus loading the images, anyway. On the other hand, if it fails to recognize one message as spam and you open it, you'll load the images and become a "marked man." (ie, your address will be tagged as one where the spam is opened)

OCR resulting in Grainy Images and junk OCRd Data

Similar Messages

Maybe you are looking for