Ocrmirror
I am trying to create a ocrmirror disk on the ocfs file system, as i had only ocr. But i am getting the following error.
(oracle 11.1 on RHEL5)
[root@rac1 bin]# ./ocrconfig -replace ocrmirror /ocfs/ocrmirror.dbf
PROT-1: Failed to initialize ocrconfig
Did you refer below links?
http://kamranagayev.com/2012/05/17/prot-1-failed-to-initialize-ocrconfig/
PROT-1: Failed to initialize ocrconfig
http://bizzteams.com/forum/oracle/33175-prot-1-failed-initialize-ocrconfig.html
Regards
http://www.oracleracexpert.com
Oracle Flashback Data Archive - Oracle Total Recall
http://www.oracleracexpert.com/2012/06/oracle-flashback-data-archive-oracle.html
Install and Configure MySQL using Generic Unix or Linux Binaries
http://www.oracleracexpert.com/2012/07/install-and-configure-mysql-using.html
Similar Messages
-
OCR recovery/restore from backup or ocrmirror 11gr2 RAC
Say i have an OCR and OCRMIRROR on asm diskgroup CRS_OCR ,CRS_OCRMIRROR diskgroups with external redundancy.If i lost one of the diskgroup say CRS_OCR how can i copy over from the OCRMIRROR to restore the primary OCR?or how can i go about restoring the primary ocr ?Please any help on this would be a helpful...
Thanks
Edited by: user9097501 on Oct 18, 2010 6:28 AM
Edited by: user9097501 on Oct 18, 2010 6:32 AMHi,
Loss of the Oracle Cluster Registry file affects the availability of RAC and Cluster Ready Services.
The OCR file can be restored from a physical backup that is automatically created or from an export file that is manually created by using the ocrconfig tool.
Additionally, starting with Oracle Database 10g Release 10.2, Oracle can optionally mirror the OCR so that a single OCR device failure can be tolerated.
Check This..
*How to restore ASM based OCR after complete loss of the CRS diskgroup [ID 1062983.1]*
Regards,
Levi Pereira -
Adding ocrmirror and voting disk on another diskgroup 11gr2 RAC
Hi Gurus,
Can i add ocrmirror on another diskgroup(external redundancy) and voting disk(normal) on anotherdiskgroup (replace) in 11gr2 RAC while databases are up and running?Hi
in Oracle 11gr2 voting disk are backed up automatically in the ocr part of any configuration change
Voting disk is automatically restored to any added voting disk
You can migrate voting fıska from non asm to asm without
Taking download cluster
To add a voting disk to asm
Crsctl replace votedisk +diskgroup
Ocrconfig -add +datagroup2
Oracle manage up to five redundant ocr locations
Hope this helps
Zekeriya Besiroglu
Http://zekeriyabesiroglu.blogspot.com -
Ocrmirror gets added on one node not on another node 11gr2 RAC on AIX 5.3
Hi,
I created another external diskgroup for redundancy and added ocr on to it and got added successfully on node1 but not on another node in a two node cluster,please find the below outputs.
node1:
mvx20b:/>ocrcheck
Status of Oracle Cluster Registry is as follows :
Version : 3
Total space (kbytes) : 262120
Used space (kbytes) : 3064
Available space (kbytes) : 259056
ID : 1640695116
Device/File Name : +CRS_DATA
Device/File integrity check succeeded
Device/File Name : +crs_data1 ------>newly added ocr
Device/File integrity check succeeded
Device/File not configured
Device/File not configured
Device/File not configured
Cluster registry integrity check succeeded
Logical corruption check succeeded
node 2:
mvx21b:/>ocrcheck
Status of Oracle Cluster Registry is as follows :
Version : 3
Total space (kbytes) : 262120
Used space (kbytes) : 3064
Available space (kbytes) : 259056
ID : 1640695116
Device/File Name : +CRS_DATA
Device/File integrity check succeeded
Device/File not configured
Device/File not configured
Device/File not configured
Device/File not configured
Cluster registry integrity check succeeded
Logical corruption check succeeded
mvx20b:/home/gmvmxu1>cluvfy comp ocr -n all
Verifying OCR integrity
Checking OCR integrity...
Checking the absence of a non-clustered configuration...
All nodes free of non-clustered, local-only configurations
ASM Running check passed. ASM is running on all cluster nodes
Checking OCR config file "/etc/oracle/ocr.loc"...
OCR config file "/etc/oracle/ocr.loc" check successful
Disk group for ocr location "+CRS_DATA" available on all the nodes
Disk group for ocr location "+crs_data1" available on all the nodes
Checking OCR device "+CRS_DATA" for sharedness...
Checking size of the OCR location "+CRS_DATA" ...
mvx20b:Size check for OCR location "+CRS_DATA" successful...
mvx21b:Size check for OCR location "+CRS_DATA" successful...
Checking OCR device "+crs_data1" for sharedness...
Checking size of the OCR location "+crs_data1" ...
mvx20b:Size check for OCR location "+crs_data1" successful...
mvx21b:Size check for OCR location "+crs_data1" successful...
WARNING:
This check does not verify the integrity of the OCR contents. Execute 'ocrcheck' as a privileged user to verify the contents of OCR.
OCR integrity check passed
Verification of OCR integrity was successful.
mvx21b:/home/gmvmxu1>cluvfy comp ocr -n all
Verifying OCR integrity
Checking OCR integrity...
Checking the absence of a non-clustered configuration...
All nodes free of non-clustered, local-only configurations
ERROR:
PRVF-4194 : Asm is not running on any of the nodes. Verification cannot proceed.
OCR integrity check failed
Verification of OCR integrity was unsuccessful on all the specified nodes.
SQL> select name,state,inst_id from gv$asm_diskgroup order by inst_id;
NAME STATE INST_ID
MVMXU1_DATA MOUNTED 1
MVMXU1_REC MOUNTED 1
CRS DISMOUNTED 1
CRS_DATA MOUNTED 1
CRS_DATA1 MOUNTED 1------mounted
MVMXU1_REC MOUNTED 2
MVMXU1_DATA MOUNTED 2
CRS MOUNTED 2
CRS_DATA MOUNTED 2
CRS_DATA1 MOUNTED 2-------->mounted
Please let me know where to look or how to add it to 2nd node.
Thanks
Edited by: user9097501 on Oct 21, 2010 6:37 AM
Edited by: user9097501 on Oct 21, 2010 7:10 AMIssue got resolved with ML "The CRS Daemon Fails to Start with 'my hash ids don't match' in the Crsd.log [ID 855932.1] "
Thanks -
Problem with installation on Fedora core 5 [OCRUTL]
Hi
We have problem with instalation XE on Fedora C5 64bit (RAID 10).
In css.log we have errors:
Oracle Database 10g CRS Release 10.2.0.1.0 Production Copyright 1996, 2005 Oracle. All rights reserved.
[ OCRUTL][4143179440]u_set_comp_error: Parameter was NULL
[ OCRUTL][4143179440]u_set_ocr_error: Parameter was NULL
2006-08-03 11:49:14.794: [ OCROSD][4143179440]utgdv:2:ocr loc file cannot be opened
2006-08-03 11:49:14.794: [ OCROSD][4143179440]utopen:1: Couldnt find ocr,[ocrmirror] location in config file
[ OCRUTL][4143179440]u_set_gbl_comp_error: Parameter was NULL
2006-08-03 11:49:14.794: [ OCRRAW][4143179440]proprinit: Could not open raw device
2006-08-03 11:49:14.794: [ default][4143179440]a_init:7!: Backend init unsuccessful : [33]
[ OCRUTL][4143179440]u_set_ocr_error: Parameter was NULL
2006-08-03 11:49:14.794: [ CSSCLNT][4143179440]clsssinit: error(33 ) in OCR initialization
While installation there are no errors. After trying to start oracle-xe (manually or after reboot) nothing happens (only errors in log files).you can ignore those errors, everyone gets them
is there a specific problem you are having -
恢复报错ORA-01139
从oracle 10g RAC （操作系统Enterprise Linux Enterprise Linux AS release 4 64bit)，数据库版本10.2.0.4环境中将数据备份恢复到相同环境的异机。
向各位大牛请教！
在做完不完全恢复时。
recover database是正常的
RMAN> sql'alter database open resetlogs';
sql statement: alter database open resetlogs
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-00601: fatal error in recovery manager
RMAN-03004: fatal error during execution of command
ORA-01092: ORACLE instance terminated. Disconnection forced
RMAN-03009: failure of sql command on default channel at 04/28/2013 09:09:05
RMAN-11003: failure during parse/execution of SQL statement: alter database open resetlogs
ORA-01041: internal error. hostdef extension doesn't exist
ORACLE error from target database:
ORA-03114: not connected to ORACLE
接着我
SQL> alter database open resetlogs;
alter database open resetlogs
ERROR at line 1:
ORA-01139: RESETLOGS option only valid after an incomplete database recovery。
警告日志如下alter.log
alter database recover logfile '/home/backup/flash_recovery_area/LD/archivelog/2013_04_28/o1_mf_2_47509_8qrwzjdm_.arc'
Sun Apr 28 08:57:23 2013
Media Recovery Log /home/backup/flash_recovery_area/LD/archivelog/2013_04_28/o1_mf_2_47509_8qrwzjdm_.arc
ORA-279 signalled during: alter database recover logfile '/home/backup/flash_recovery_area/LD/archivelog/2013_04_28/o1_mf_2_47509_8qrwzjdm_.arc'...
Sun Apr 28 08:57:23 2013
alter database recover logfile '/home/backup/flash_recovery_area/LD/archivelog/2013_04_28/o1_mf_1_85650_8qrwz1b1_.arc'
Sun Apr 28 08:57:23 2013
Media Recovery Log /home/backup/flash_recovery_area/LD/archivelog/2013_04_28/o1_mf_1_85650_8qrwz1b1_.arc
ORA-279 signalled during: alter database recover logfile '/home/backup/flash_recovery_area/LD/archivelog/2013_04_28/o1_mf_1_85650_8qrwz1b1_.arc'...
Sun Apr 28 08:57:31 2013
alter database recover logfile '/home/backup/flash_recovery_area/LD/archivelog/2013_04_28/o1_mf_1_85651_8qrwz1hk_.arc'
Sun Apr 28 08:57:31 2013
Media Recovery Log /home/backup/flash_recovery_area/LD/archivelog/2013_04_28/o1_mf_1_85651_8qrwz1hk_.arc
ORA-279 signalled during: alter database recover logfile '/home/backup/flash_recovery_area/LD/archivelog/2013_04_28/o1_mf_1_85651_8qrwz1hk_.arc'...
Sun Apr 28 08:57:31 2013
alter database recover logfile '/home/backup/flash_recovery_area/LD/archivelog/2013_04_28/o1_mf_2_47510_8qrwzjm2_.arc'
Sun Apr 28 08:57:31 2013
Media Recovery Log /home/backup/flash_recovery_area/LD/archivelog/2013_04_28/o1_mf_2_47510_8qrwzjm2_.arc
ORA-279 signalled during: alter database recover logfile '/home/backup/flash_recovery_area/LD/archivelog/2013_04_28/o1_mf_2_47510_8qrwzjm2_.arc'...
Sun Apr 28 08:57:31 2013
alter database recover cancel
Sun Apr 28 08:57:37 2013
Media Recovery Canceled
Completed: alter database recover cancel
Sun Apr 28 09:04:15 2013
alter database rename file '+DATADG/ld/redo01a.log' to '/home/backup/oradata/ld/redo1a.log'
Sun Apr 28 09:04:15 2013
Starting control autobackup
******************** WARNING ***************************
The errors during Server autobackup are not fatal, as it
is attempted after sucessful completion of the command.
However, it is recomended to take an RMAN control file
backup as soon as possible because the Autobackup failed
with the following error:
ORA-00236: snapshot operation disallowed: mounted control file is a backup
with the following error:
ORA-00236: snapshot operation disallowed: mounted control file is a backup
******************** END OF WARNING *******************
Completed: alter database rename file '+DATADG/ld/redo03a.log' to '/home/backup/oradata/ld/redo3a.log'
Sun Apr 28 09:05:32 2013
alter database rename file '+DATADG/ld/redo03b.log' to '/home/backup/oradata/ld/redo3b.log'
Starting control autobackup
******************** WARNING ***************************
The errors during Server autobackup are not fatal, as it
is attempted after sucessful completion of the command.
However, it is recomended to take an RMAN control file
backup as soon as possible because the Autobackup failed
with the following error:
ORA-00236: snapshot operation disallowed: mounted control file is a backup
******************** END OF WARNING *******************
Completed: alter database rename file '+DATADG/ld/redo03b.log' to '/home/backup/oradata/ld/redo3b.log'
Sun Apr 28 09:05:42 2013
alter database rename file '+DATADG/ld/redo04a.log' to '/home/backup/oradata/ld/redo4a.log'
Sun Apr 28 09:05:42 2013
Starting control autobackup
******************** WARNING ***************************
The errors during Server autobackup are not fatal, as it
is attempted after sucessful completion of the command.
However, it is recomended to take an RMAN control file
backup as soon as possible because the Autobackup failed
with the following error:
ORA-00236: snapshot operation disallowed: mounted control file is a backup
******************** END OF WARNING *******************
Completed: alter database rename file '+DATADG/ld/redo04a.log' to '/home/backup/oradata/ld/redo4a.log'
Sun Apr 28 09:05:50 2013
alter database rename file '+DATADG/ld/redo04b.log' to '/home/backup/oradata/ld/redo4b.log'
Starting control autobackup
******************** WARNING ***************************
The errors during Server autobackup are not fatal, as it
is attempted after sucessful completion of the command.
However, it is recomended to take an RMAN control file
backup as soon as possible because the Autobackup failed
with the following error:
ORA-00236: snapshot operation disallowed: mounted control file is a backup
Sun Apr 28 09:10:00 2013
Successful mount of redo thread 1, with mount id 2474343140
Sun Apr 28 09:10:00 2013
Database mounted in Exclusive Mode
Completed: ALTER DATABASE MOUNT
Sun Apr 28 09:10:09 2013
alter database open resetlogs
ORA-1139 signalled during: alter database open resetlogs...
xx_ora_30570.trc日志如下
/opt/app/oracle/admin/ld/udump/xx_ora_30570.trc
Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
ORACLE_HOME = /opt/app/oracle/product/10.2.0/db_1
System name: Linux
Node name: ldTest
Release: 2.6.9-67.0.0.0.1.ELsmp
Version: #1 SMP Sun Nov 18 01:06:10 EST 2007
Machine: x86_64
Instance name: ld
Redo thread mounted by this instance: 1
Oracle process number: 14
Unix process pid: 30570, image: oracle@ldTest (TNS V1-V3)
*** 2013-04-27 20:39:32.112
*** ACTION NAME:(0000005 STARTED124) 2013-04-27 20:39:32.112
*** MODULE NAME:(rman@ldTest (TNS V1-V3)) 2013-04-27 20:39:32.112
*** SERVICE NAME:() 2013-04-27 20:39:32.112
*** SESSION ID:(542.8) 2013-04-27 20:39:32.112
Control file resized from 4322 to 4412 blocks
kccrsd_append: rectype = 13, lbn = 2161, recs = 1000
*** 2013-04-27 22:47:07.275
*** ACTION NAME:(0000139 STARTED60) 2013-04-27 22:47:07.275
2013-04-27 22:47:07.275: [ OCROSD]utgdv:2:ocr loc file cannot be opened
2013-04-27 22:47:07.279: [ OCROSD]utopen:1: Couldnt find ocr,[ocrmirror] location in config file
2013-04-27 22:47:07.279: [ OCRRAW]proprinit: Could not open raw device
2013-04-27 22:47:07.279: [ default]a_init:7!: Backend init unsuccessful : [33]
2013-04-27 22:47:07.279: [ CSSCLNT]clsssinit: error(33 ) in OCR initialization
kgxgncin: CLSS init failed with status 21
ORA-19625: error identifying file +DATADG/system01.dbf
ORA-17503: ksfdopn:2 Failed to open file +DATADG/system01.dbf
ORA-15001: diskgroup "DATADG" does not exist or is not mounted
ORA-15077: could not locate ASM instance serving a required diskgroup
ORA-29701: unable to connect to Cluster Manager
*** ACTION NAME:(0000140 STARTED60) 2013-04-27 22:47:07.375
2013-04-27 22:47:07.375: [ OCROSD]utgdv:2:ocr loc file cannot be opened
2013-04-27 22:47:07.375: [ OCROSD]utopen:1: Couldnt find ocr,[ocrmirror] location in config file
2013-04-27 22:47:07.375: [ OCRRAW]proprinit: Could not open raw device
2013-04-27 22:47:07.375: [ default]a_init:7!: Backend init unsuccessful : [33]
2013-04-27 22:47:07.375: [ CSSCLNT]clsssinit: error(33 ) in OCR initialization
kgxgncin: CLSS init failed with status 21
ORA-19625: error identifying file +DATADG/undotbs01.dbf
ORA-17503: ksfdopn:2 Failed to open file +DATADG/undotbs01.dbf
ORA-15001: diskgroup "DATADG" does not exist or is not mounted
ORA-15077: could not locate ASM instance serving a required diskgroup
ORA-29701: unable to connect to Cluster Manager
*** ACTION NAME:(0000141 STARTED60) 2013-04-27 22:47:07.462
2013-04-27 22:47:07.462: [ OCROSD]utgdv:2:ocr loc file cannot be opened
2013-04-27 22:47:07.462: [ OCROSD]utopen:1: Couldnt find ocr,[ocrmirror] location in config file
2013-04-27 22:47:07.462: [ OCRRAW]proprinit: Could not open raw device
2013-04-27 22:47:07.462: [ default]a_init:7!: Backend init unsuccessful : [33]
2013-04-27 22:47:07.462: [ CSSCLNT]clsssinit: error(33 ) in OCR initialization
kgxgncin: CLSS init failed with status 21
ORA-19625: error identifying file +DATADG/sysaux01.dbf
ORA-17503: ksfdopn:2 Failed to open file +DATADG/sysaux01.dbf
ORA-15001: diskgroup "DATADG" does not exist or is not mounted
ORA-15077: could not locate ASM instance serving a required diskgroup
ORA-29701: unable to connect to Cluster Manager
*** ACTION NAME:(0000142 STARTED60) 2013-04-27 22:47:07.538
2013-04-27 22:47:07.538: [ OCROSD]utgdv:2:ocr loc file cannot be opened
2013-04-27 22:47:07.538: [ OCROSD]utopen:1: Couldnt find ocr,[ocrmirror] location in config file
2013-04-27 22:47:07.538: [ OCRRAW]proprinit: Could not open raw device
2013-04-27 22:47:07.538: [ default]a_init:7!: Backend init unsuccessful : [33]
2013-04-27 22:47:07.538: [ CSSCLNT]clsssinit: error(33 ) in OCR initialization
kgxgncin: CLSS init failed with status 21
ORA-19625: error identifying file +DATADG/undotbs02.dbf
ORA-17503: ksfdopn:2 Failed to open file +DATADG/undotbs02.dbf
ORA-15001: diskgroup "DATADG" does not exist or is not mounted
ORA-15077: could not locate ASM instance serving a required diskgroup
ORA-29701: unable to connect to Cluster Manager
*** ACTION NAME:(0000143 STARTED60) 2013-04-27 22:47:07.603
2013-04-27 22:47:07.603: [ OCROSD]utgdv:2:ocr loc file cannot be opened
2013-04-27 22:47:07.604: [ OCROSD]utopen:1: Couldnt find ocr,[ocrmirror] location in config file
2013-04-27 22:47:07.604: [ OCRRAW]proprinit: Could not open raw device
2013-04-27 22:47:07.604: [ default]a_init:7!: Backend init unsuccessful : [33]
2013-04-27 22:47:07.604: [ CSSCLNT]clsssinit: error(33 ) in OCR initialization
kgxgncin: CLSS init failed with status 21
ORA-19625: error identifying file +DATADG/users01.dbf
ORA-17503: ksfdopn:2 Failed to open file +DATADG/users01.dbf
ORA-15001: diskgroup "DATADG" does not exist or is not mounted
ORA-15077: could not locate ASM instance serving a required diskgroup
ORA-29701: unable to connect to Cluster Manager
*** ACTION NAME:(0000144 STARTED60) 2013-04-27 22:47:07.660
2013-04-27 22:47:07.660: [ OCROSD]utgdv:2:ocr loc file cannot be opened
2013-04-27 22:47:07.660: [ OCROSD]utopen:1: Couldnt find ocr,[ocrmirror] location in config file
2013-04-27 22:47:07.660: [ OCRRAW]proprinit: Could not open raw device
2013-04-27 22:47:07.660: [ default]a_init:7!: Backend init unsuccessful : [33]
2013-04-27 22:47:07.660: [ CSSCLNT]clsssinit: error(33 ) in OCR initialization
kgxgncin: CLSS init failed with status 21
ORA-19625: error identifying file +DATADG/sale_ix01.dbf
ORA-17503: ksfdopn:2 Failed to open file +DATADG/sale_ix01.dbf
ORA-15001: diskgroup "DATADG" does not exist or is not mounted
ORA-15077: could not locate ASM instance serving a required diskgroup
ORA-29701: unable to connect to Cluster Manager
*** ACTION NAME:(0000145 STARTED60) 2013-04-27 22:47:07.741
2013-04-27 22:47:07.741: [ OCROSD]utgdv:2:ocr loc file cannot be opened
2013-04-27 22:47:07.741: [ OCROSD]utopen:1: Couldnt find ocr,[ocrmirror] location in config file
2013-04-27 22:47:07.741: [ OCRRAW]proprinit: Could not open raw device
2013-04-27 22:47:07.741: [ default]a_init:7!: Backend init unsuccessful : [33]
2013-04-27 22:47:07.741: [ CSSCLNT]clsssinit: error(33 ) in OCR initialization
kgxgncin: CLSS init failed with status 21
ORA-19625: error identifying file +DATADG/sale01.dbf
ORA-17503: ksfdopn:2 Failed to open file +DATADG/sale01.dbf
ORA-15001: diskgroup "DATADG" does not exist or is not mounted
ORA-15077: could not locate ASM instance serving a required diskgroup
ORA-29701: unable to connect to Cluster Manager
*** ACTION NAME:(0000146 STARTED60) 2013-04-27 22:47:07.829
2013-04-27 22:47:07.829: [ OCROSD]utgdv:2:ocr loc file cannot be opened
2013-04-27 22:47:07.829: [ OCROSD]utopen:1: Couldnt find ocr,[ocrmirror] location in config file
2013-04-27 22:47:07.829: [ OCRRAW]proprinit: Could not open raw device
2013-04-27 22:47:07.829: [ default]a_init:7!: Backend init unsuccessful : [33]
2013-04-27 22:47:07.829: [ CSSCLNT]clsssinit: error(33 ) in OCR initialization
kgxgncin: CLSS init failed with status 21
ORA-19625: error identifying file +DATADG/cpc01.dbf
ORA-17503: ksfdopn:2 Failed to open file +DATADG/cpc01.dbf
ORA-15001: diskgroup "DATADG" does not exist or is not mounted
ORA-15077: could not locate ASM instance serving a required diskgroup
ORA-29701: unable to connect to Cluster Manager
*** ACTION NAME:(0000147 STARTED60) 2013-04-27 22:47:07.974
2013-04-27 22:47:07.974: [ OCROSD]utgdv:2:ocr loc file cannot be opened
2013-04-27 22:47:07.974: [ OCROSD]utopen:1: Couldnt find ocr,[ocrmirror] location in config file
2013-04-27 22:47:07.974: [ OCRRAW]proprinit: Could not open raw device
2013-04-27 22:47:07.974: [ default]a_init:7!: Backend init unsuccessful : [33]
2013-04-27 22:47:07.974: [ CSSCLNT]clsssinit: error(33 ) in OCR initialization
kgxgncin: CLSS init failed with status 21
ORA-19625: error identifying file +DATADG/cpc_ix01.dbf
ORA-17503: ksfdopn:2 Failed to open file +DATADG/cpc_ix01.dbf
ORA-15001: diskgroup "DATADG" does not exist or is not mounted
ORA-15077: could not locate ASM instance serving a required diskgroup
ORA-29701: unable to connect to Cluster Manager
*** ACTION NAME:(0000148 STARTED60) 2013-04-27 22:47:08.073
2013-04-27 22:47:08.073: [ OCROSD]utgdv:2:ocr loc file cannot be opened
2013-04-27 22:47:08.073: [ OCROSD]utopen:1: Couldnt find ocr,[ocrmirror] location in config file
2013-04-27 22:47:08.073: [ OCRRAW]proprinit: Could not open raw device
2013-04-27 22:47:08.073: [ default]a_init:7!: Backend init unsuccessful : [33]
2013-04-27 22:47:08.073: [ CSSCLNT]clsssinit: error(33 ) in OCR initialization
kgxgncin: CLSS init failed with status 21
ORA-19625: error identifying file +DATADG/sale02.dbf
ORA-17503: ksfdopn:2 Failed to open file +DATADG/sale02.dbf
ORA-15001: diskgroup "DATADG" does not exist or is not mounted
ORA-15077: could not locate ASM instance serving a required diskgroup
ORA-29701: unable to connect to Cluster Manager
*** ACTION NAME:(0000149 STARTED60) 2013-04-27 22:47:08.168
2013-04-27 22:47:08.168: [ OCROSD]utgdv:2:ocr loc file cannot be opened
2013-04-27 22:47:08.168: [ OCROSD]utopen:1: Couldnt find ocr,[ocrmirror] location in config file
2013-04-27 22:47:08.168: [ OCRRAW]proprinit: Could not open raw device
2013-04-27 22:47:08.168: [ default]a_init:7!: Backend init unsuccessful : [33]
2013-04-27 22:47:08.168: [ CSSCLNT]clsssinit: error(33 ) in OCR initialization
kgxgncin: CLSS init failed with status 21
ORA-19625: error identifying file +DATADG/sale_ix02.dbf
ORA-17503: ksfdopn:2 Failed to open file +DATADG/sale_ix02.dbf
ORA-15001: diskgroup "DATADG" does not exist or is not mounted
ORA-15077: could not locate ASM instance serving a required diskgroup
ORA-29701: unable to connect to Cluster Manager
*** ACTION NAME:(0000150 STARTED60) 2013-04-27 22:47:08.295
2013-04-27 22:47:08.295: [ OCROSD]utgdv:2:ocr loc file cannot be opened
2013-04-27 22:47:08.295: [ OCROSD]utopen:1: Couldnt find ocr,[ocrmirror] location in config file
2013-04-27 22:47:08.295: [ OCRRAW]proprinit: Could not open raw device
2013-04-27 22:47:08.295: [ default]a_init:7!: Backend init unsuccessful : [33]
2013-04-27 22:47:08.295: [ CSSCLNT]clsssinit: error(33 ) in OCR initialization
kgxgncin: CLSS init failed with status 21
ORA-19625: error identifying file +DATADG/sale03.dbf
ORA-17503: ksfdopn:2 Failed to open file +DATADG/sale03.dbf
ORA-15001: diskgroup "DATADG" does not exist or is not mounted
ORA-15077: could not locate ASM instance serving a required diskgroup
ORA-29701: unable to connect to Cluster Manager
*** ACTION NAME:(0000151 STARTED60) 2013-04-27 22:47:08.396
2013-04-27 22:47:08.396: [ OCROSD]utgdv:2:ocr loc file cannot be opened
2013-04-27 22:47:08.396: [ OCROSD]utopen:1: Couldnt find ocr,[ocrmirror] location in config file
2013-04-27 22:47:08.396: [ OCRRAW]proprinit: Could not open raw device
2013-04-27 22:47:08.396: [ default]a_init:7!: Backend init unsuccessful : [33]
2013-04-27 22:47:08.396: [ CSSCLNT]clsssinit: error(33 ) in OCR initialization
kgxgncin: CLSS init failed with status 21
ORA-19625: error identifying file +DATADG/sale04.dbf
ORA-17503: ksfdopn:2 Failed to open file +DATADG/sale04.dbf
ORA-15001: diskgroup "DATADG" does not exist or is not mounted
ORA-15077: could not locate ASM instance serving a required diskgroup
ORA-29701: unable to connect to Cluster Manager
*** ACTION NAME:(0000152 STARTED60) 2013-04-27 22:47:08.488
2013-04-27 22:47:08.488: [ OCROSD]utgdv:2:ocr loc file cannot be opened
2013-04-27 22:47:08.488: [ OCROSD]utopen:1: Couldnt find ocr,[ocrmirror] location in config file
2013-04-27 22:47:08.488: [ OCRRAW]proprinit: Could not open raw device
2013-04-27 22:47:08.488: [ default]a_init:7!: Backend init unsuccessful : [33]
2013-04-27 22:47:08.488: [ CSSCLNT]clsssinit: error(33 ) in OCR initialization
kgxgncin: CLSS init failed with status 21
ORA-19625: error identifying file +DATADG/sale05.dbf
ORA-17503: ksfdopn:2 Failed to open file +DATADG/sale05.dbf
ORA-15001: diskgroup "DATADG" does not exist or is not mounted
ORA-15077: could not locate ASM instance serving a required diskgroup
ORA-29701: unable to connect to Cluster Manager
*** ACTION NAME:(0000153 STARTED60) 2013-04-27 22:47:08.587
2013-04-27 22:47:08.587: [ OCROSD]utgdv:2:ocr loc file cannot be opened
2013-04-27 22:47:08.587: [ OCROSD]utopen:1: Couldnt find ocr,[ocrmirror] location in config file
2013-04-27 22:47:08.587: [ OCRRAW]proprinit: Could not open raw device
2013-04-27 22:47:08.587: [ default]a_init:7!: Backend init unsuccessful : [33]
2013-04-27 22:47:08.587: [ CSSCLNT]clsssinit: error(33 ) in OCR initialization
kgxgncin: CLSS init failed with status 21
ORA-19625: error identifying file +DATADG/f_data01.dbf
ORA-17503: ksfdopn:2 Failed to open file +DATADG/f_data01.dbf
ORA-15001: diskgroup "DATADG" does not exist or is not mounted
ORA-15077: could not locate ASM instance serving a required diskgroup
ORA-29701: unable to connect to Cluster Manager
*** ACTION NAME:(0000154 STARTED60) 2013-04-27 22:47:08.669
2013-04-27 22:47:08.669: [ OCROSD]utgdv:2:ocr loc file cannot be opened
2013-04-27 22:47:08.669: [ OCROSD]utopen:1: Couldnt find ocr,[ocrmirror] location in config file
2013-04-27 22:47:08.669: [ OCRRAW]proprinit: Could not open raw device
2013-04-27 22:47:08.669: [ default]a_init:7!: Backend init unsuccessful : [33]
2013-04-27 22:47:08.670: [ CSSCLNT]clsssinit: error(33 ) in OCR initialization
kgxgncin: CLSS init failed with status 21
ORA-19625: error identifying file +DATADG/f_data02.dbf
ORA-17503: ksfdopn:2 Failed to open file +DATADG/f_data02.dbf
ORA-15001: diskgroup "DATADG" does not exist or is not mounted
ORA-15077: could not locate ASM instance serving a required diskgroup
ORA-29701: unable to connect to Cluster Manager
*** ACTION NAME:(0000155 STARTED60) 2013-04-27 22:47:08.771
2013-04-27 22:47:08.771: [ OCROSD]utgdv:2:ocr loc file cannot be opened
2013-04-27 22:47:08.771: [ OCROSD]utopen:1: Couldnt find ocr,[ocrmirror] location in config file
2013-04-27 22:47:08.771: [ OCRRAW]proprinit: Could not open raw device
2013-04-27 22:47:08.771: [ default]a_init:7!: Backend init unsuccessful : [33]
2013-04-27 22:47:08.771: [ CSSCLNT]clsssinit: error(33 ) in OCR initialization
kgxgncin: CLSS init failed with status 21
ORA-19625: error identifying file +DATADG/f_ix01.dbf
ORA-17503: ksfdopn:2 Failed to open file +DATADG/f_ix01.dbf
ORA-15001: diskgroup "DATADG" does not exist or is not mounted
ORA-15077: could not locate ASM instance serving a required diskgroup
ORA-29701: unable to connect to Cluster Manager
*** ACTION NAME:(0000156 STARTED60) 2013-04-27 22:47:08.886
2013-04-27 22:47:08.886: [ OCROSD]utgdv:2:ocr loc file cannot be opened
2013-04-27 22:47:08.886: [ OCROSD]utopen:1: Couldnt find ocr,[ocrmirror] location in config file
2013-04-27 22:47:08.886: [ OCRRAW]proprinit: Could not open raw device
2013-04-27 22:47:08.886: [ default]a_init:7!: Backend init unsuccessful : [33]
2013-04-27 22:47:08.886: [ CSSCLNT]clsssinit: error(33 ) in OCR initialization
kgxgncin: CLSS init failed with status 21
ORA-19625: error identifying file +DATADG/f_ix02.dbf
ORA-17503: ksfdopn:2 Failed to open file +DATADG/f_ix02.dbf
ORA-15001: diskgroup "DATADG" does not exist or is not mounted
ORA-15077: could not locate ASM instance serving a required diskgroup
ORA-29701: unable to connect to Cluster Manager
*** ACTION NAME:(0000157 STARTED60) 2013-04-27 22:47:08.999
2013-04-27 22:47:08.999: [ OCROSD]utgdv:2:ocr loc file cannot be opened
2013-04-27 22:47:08.999: [ OCROSD]utopen:1: Couldnt find ocr,[ocrmirror] location in config file
2013-04-27 22:47:08.999: [ OCRRAW]proprinit: Could not open raw device
2013-04-27 22:47:08.999: [ default]a_init:7!: Backend init unsuccessful : [33]
2013-04-27 22:47:08.999: [ CSSCLNT]clsssinit: error(33 ) in OCR initialization
kgxgncin: CLSS init failed with status 21
ORA-19625: error identifying file +DATADG/f_data03.dbf
ORA-17503: ksfdopn:2 Failed to open file +DATADG/f_data03.dbf
ORA-15001: diskgroup "DATADG" does not exist or is not mounted
ORA-15077: could not locate ASM instance serving a required diskgroup
ORA-29701: unable to connect to Cluster Manager
*** ACTION NAME:(0000158 STARTED60) 2013-04-27 22:47:09.096
2013-04-27 22:47:09.096: [ OCROSD]utgdv:2:ocr loc file cannot be opened
2013-04-27 22:47:09.096: [ OCROSD]utopen:1: Couldnt find ocr,[ocrmirror] location in config file
2013-04-27 22:47:09.096: [ OCRRAW]proprinit: Could not open raw device
2013-04-27 22:47:09.096: [ default]a_init:7!: Backend init unsuccessful : [33]
2013-04-27 22:47:09.096: [ CSSCLNT]clsssinit: error(33 ) in OCR initialization
kgxgncin: CLSS init failed with status 21
ORA-19625: error identifying file +DATADG/f_data04.dbf
ORA-17503: ksfdopn:2 Failed to open file +DATADG/f_data04.dbf
ORA-15001: diskgroup "DATADG" does not exist or is not mounted
ORA-15077: could not locate ASM instance serving a required diskgroup
ORA-29701: unable to connect to Cluster Manager
*** ACTION NAME:(0000159 STARTED60) 2013-04-27 22:47:09.150
2013-04-27 22:47:09.150: [ OCROSD]utgdv:2:ocr loc file cannot be opened
2013-04-27 22:47:09.150: [ OCROSD]utopen:1: Couldnt find ocr,[ocrmirror] location in config file
2013-04-27 22:47:09.150: [ OCRRAW]proprinit: Could not open raw device
2013-04-27 22:47:09.150: [ default]a_init:7!: Backend init unsuccessful : [33]
2013-04-27 22:47:09.150: [ CSSCLNT]clsssinit: error(33 ) in OCR initialization
kgxgncin: CLSS init failed with status 21
ORA-19625: error identifying file +DATADG/users02.dbf
ORA-17503: ksfdopn:2 Failed to open file +DATADG/users02.dbf
ORA-15001: diskgroup "DATADG" does not exist or is not mounted
ORA-15077: could not locate ASM instance serving a required diskgroup
ORA-29701: unable to connect to Cluster Manager
ORA-00313: open failed for members of log group 1 of thread 1
ORA-00312: online log 1 thread 1: '/home/backup/oradata/ld/redo1b.log'
ORA-27037: unable to obtain file status
Linux-x86_64 Error: 2: No such file or directory
Additional information: 3
ORA-00312: online log 1 thread 1: '/home/backup/oradata/ld/redo1a.log'
ORA-27037: unable to obtain file status
Linux-x86_64 Error: 2: No such file or directory
Additional information: 3
ORA-00313: open failed for members of log group 1 of thread 1
ORA-00312: online log 1 thread 1: '/home/backup/oradata/ld/redo1b.log'
ORA-27037: unable to obtain file status
Linux-x86_64 Error: 2: No such file or directory
Additional information: 3
ORA-00312: online log 1 thread 1: '/home/backup/oradata/ld/redo1a.log'
ORA-27037: unable to obtain file status
Linux-x86_64 Error: 2: No such file or directory
Additional information: 3
logfile 1 open failed:313
*** 2013-04-28 09:08:35.897 3950 kcrr.c
Archiving online redo logfile /home/backup/oradata/ld/redo2b.log
WARNING: Archival will be performed using 2 passes.
The first pass will attempt to determine the end-of-file
of the online redo logfile. The end-of-file is determined
by identifying what is described as a "corrupt" block
header. This will be reported as an ORA-00354 error.
However, this is not really a corrupt block - it is the
end of the redo data.
The second pass will then archive the online redo logfile
using the identified end-of-file information.
ORA-00313: open failed for members of log group 2 of thread 1
ORA-00312: online log 2 thread 1: '/home/backup/oradata/ld/redo2b.log'
ORA-27037: unable to obtain file status
Linux-x86_64 Error: 2: No such file or directory
Additional information: 3
ORA-00312: online log 2 thread 1: '/home/backup/oradata/ld/redo2a.log'
ORA-27037: unable to obtain file status
Linux-x86_64 Error: 2: No such file or directory
Additional information: 3
ORA-00313: open failed for members of log group 2 of thread 1
ORA-00312: online log 2 thread 1: '/home/backup/oradata/ld/redo2b.log'
ORA-27037: unable to obtain file status
Linux-x86_64 Error: 2: No such file or directory
Additional information: 3
ORA-00312: online log 2 thread 1: '/home/backup/oradata/ld/redo2a.log'
ORA-27037: unable to obtain file status
Linux-x86_64 Error: 2: No such file or directory
Additional information: 3
logfile 2 open failed:313
*** 2013-04-28 09:08:35.898 3950 kcrr.c
Archiving online redo logfile /home/backup/oradata/ld/redo3b.log
WARNING: Archival will be performed using 2 passes.
The first pass will attempt to determine the end-of-file
of the online redo logfile. The end-of-file is determined
by identifying what is described as a "corrupt" block
header. This will be reported as an ORA-00354 error.
However, this is not really a corrupt block - it is the
end of the redo data.
The second pass will then archive the online redo logfile
using the identified end-of-file information.
请教如何解决ERROR at line 1:
ORA-01139: RESETLOGS option only valid after an incomplete database recovery。谢谢Hello Aman,
Sorry couldn't give all information in frustration.
Oracle version is 9.2.0.1.0 running on Red Hat 4
Actually i did TPITR and have to open database with resetlogoption recovery was successful but while opening received this error.
Database dismounted.
ORACLE instance shut down.
SQL> STARTUP NOMOUNT PFILE=/oracle/prdtpi/pfile/prdtpi;
ORACLE instance started.
Total System Global Area 798040164 bytes
Fixed Size 454756 bytes
Variable Size 478150656 bytes
Database Buffers 318767104 bytes
Redo Buffers 667648 bytes
SQL> alter database mount clone database;
SQL> RECOVER AUTOMATIC DATABASE UNTIL CHANGE 3997955 USING BACKUP CONTROLFILE;
ORA-00283: recovery session canceled due to errors
ORA-00264: no recovery required
SQL> alter database datafile 1 online;
Database altered.
SQL> ed
Wrote file afiedt.buf
1* alter database datafile 12 online
SQL> /
Database altered.
SQL> ed
Wrote file afiedt.buf
1* alter database datafile 13 online
SQL> /
Database altered.
SQL> RECOVER AUTOMATIC DATABASE UNTIL CHANGE 3997955 USING BACKUP CONTROLFILE;
Media recovery complete.
SQL> alter database open resetlogs;
alter database open resetlogs
ERROR at line 1:
ORA-01139: RESETLOGS option only valid after an incomplete database recovery
SQL> alter database open resetlogs;
alter database open resetlogs
ERROR at line 1:
ORA-01139: RESETLOGS option only valid after an incomplete database recovery
SQL> ALTER DATABASE OPEN RESETLOGS;
ALTER DATABASE OPEN RESETLOGS
ERROR at line 1:
ORA-01139: RESETLOGS option only valid after an incomplete database recovery -
Difficulties installing oracle xe under Ubuntu
Here's what I did:
1) added this to /etc/apt/sources.list: deb http://oss.oracle.com/debian unstable main non-free
2) ran: wget http://oss.oracle.com/el4/RPM-GPG-KEY-oracle -O- | sudo apt-key add -
3) ran: sudo apt-get update
4) via the Synaptic package manager, clicked on "oracle xe". This package was installed along with libaio.
5) checked my applications menu and saw that oracle had appeared.
6) ran: sudo /etc/init.d/oracle-xe configure (I changed the port for Oracle Application Express to 9090 so it wouldn't conflict with Tomcat, which uses port 8080. I indicated that I didn't want the database server to launch on boot. I was planning launching as needed from the applications menu).
Now I thought that I was ready to go. So I went to the applications menu and selected start database. A terminal window popped up warning me that I wasn't a member of the dba group. I added myself to the dba group. I restarted my computer and tried starting the database once again from the applications menu.
This time no warning terminal came up. Basically I didn't get any feedback as to whether the database server was actually running. So I tried accessing:
http://127.0.0.1:9090/apex. I was told the browser couldn't establish a connection with the database. I selected "run sql from the command line" from the applications menu. This didnt' work either. The terminal window that came up began like this:
/usr/lib/oracle/xe/app/oracle/product/10.2.0/server/bin/nls_lang.sh: 114: [[: not found
/usr/lib/oracle/xe/app/oracle/product/10.2.0/server/bin/nls_lang.sh: 114: [[: not found
I also checked my logs:
Oracle Database 10g CRS Release 10.2.0.1.0 Production Copyright 1996, 2005 Oracle. All rights reserved.
[ OCRUTL][3067549888]u_set_comp_error: Parameter was NULL
[ OCRUTL][3067549888]u_set_ocr_error: Parameter was NULL
2008-07-18 22:18:24.502: [ OCROSD][3067549888]utgdv:2:ocr loc file cannot be opened
2008-07-18 22:18:24.502: [ OCROSD][3067549888]utopen:1: Couldnt find ocr,[ocrmirror] location in config file
[ OCRUTL][3067549888]u_set_gbl_comp_error: Parameter was NULL
2008-07-18 22:18:24.502: [ OCRRAW][3067549888]proprinit: Could not open raw device
2008-07-18 22:18:24.502: [ default][3067549888]a_init:7!: Backend init unsuccessful : [33]
[ OCRUTL][3067549888]u_set_ocr_error: Parameter was NULL
2008-07-18 22:18:24.502: [ CSSCLNT][3067549888]clsssinit: error(33 ) in OCR initialization
Any suggestions?
DebYou are trying to install on an unsupported o/s.
My recommendation would be to download Oracle Enterprise Linux and then follow the installation instructions provided by Oracle.
PS: There is a dedicated XE forum here at OTN. You will likely get more responsive answers if you post there in the future. -
Difficulties installing oracle xe under Ubuntu (7.10)
I laid out the difficulties I was having in the Installation forum, and a responder said I would have better luck getting a response in this forum.
Here's what I did:
1) added this to /etc/apt/sources.list: deb http://oss.oracle.com/debian unstable main non-free
2) ran: wget http://oss.oracle.com/el4/RPM-GPG-KEY-oracle -O- | sudo apt-key add -
3) ran: sudo apt-get update
4) via the Synaptic package manager, clicked on "oracle xe". This package was installed along with libaio.
5) checked my applications menu and saw that oracle had appeared.
6) ran: sudo /etc/init.d/oracle-xe configure (I changed the port for Oracle Application Express to 9090 so it wouldn't conflict with Tomcat, which uses port 8080. I indicated that I didn't want the database server to launch on boot. I was planning launching as needed from the applications menu).
Now I thought that I was ready to go. So I went to the applications menu and selected start database. A terminal window popped up warning me that I wasn't a member of the dba group. I added myself to the dba group. I restarted my computer and tried starting the database once again from the applications menu.
This time no warning terminal came up. Basically I didn't get any feedback as to whether the database server was actually running. So I tried accessing:
http://127.0.0.1:9090/apex. I was told the browser couldn't establish a connection with the database. I selected "run sql from the command line" from the applications menu. This didnt' work either. The terminal window that came up began like this:
/usr/lib/oracle/xe/app/oracle/product/10.2.0/server/bin/nls_lang.sh: 114: [[: not found
/usr/lib/oracle/xe/app/oracle/product/10.2.0/server/bin/nls_lang.sh: 114: [[: not found
I also checked my logs:
Oracle Database 10g CRS Release 10.2.0.1.0 Production Copyright 1996, 2005 Oracle. All rights reserved.
[ OCRUTL][3067549888]u_set_comp_error: Parameter was NULL
[ OCRUTL][3067549888]u_set_ocr_error: Parameter was NULL
2008-07-18 22:18:24.502: [ OCROSD][3067549888]utgdv:2:ocr loc file cannot be opened
2008-07-18 22:18:24.502: [ OCROSD][3067549888]utopen:1: Couldnt find ocr,[ocrmirror] location in config file
[ OCRUTL][3067549888]u_set_gbl_comp_error: Parameter was NULL
2008-07-18 22:18:24.502: [ OCRRAW][3067549888]proprinit: Could not open raw device
2008-07-18 22:18:24.502: [ default][3067549888]a_init:7!: Backend init unsuccessful : [33]
[ OCRUTL][3067549888]u_set_ocr_error: Parameter was NULL
2008-07-18 22:18:24.502: [ CSSCLNT][3067549888]clsssinit: error(33 ) in OCR initialization
Any suggestions?
DebAny suggestions?http://ubuntuforums.org/showthread.php?t=697357
Also:
http://www.debian-administration.org/articles/430
HTH -
Hi Gurus,
We are running application on Oracle 10g RAC with ASM storage (NETAPPS) on IBM machine with Windows 2003 64-bit OS. Planning to upgrade the storage, note that the new storage is EMC.
Please kindly help me with moving the database from one storage to other storage.
As per my knowledge below are steps to perform while moving the data files, please clarify or help me accordingly if the steps are not correct.
1) Create DISK Group with NEW Storage ( Can we have different storage for DISK GROUPS???)
2) Mount the Database
3) COPY the DATAFILES using RMAN COPY command to new DISK Group.
4) Switch Datafile to COPY
5) RECOVER Database
6) DELETE old Datafile copy.
7) Open the database.
Are the above steps are correct for migrating data files???????
Also, please guide me to migrate OCR and Voting Disks to the new storage??????875394 wrote:
Hi Gurus,
We are running application on Oracle 10g RAC with ASM storage (NETAPPS) on IBM machine with Windows 2003 64-bit OS. Planning to upgrade the storage, note that the new storage is EMC.
Please kindly help me with moving the database from one storage to other storage.
As per my knowledge below are steps to perform while moving the data files, please clarify or help me accordingly if the steps are not correct.
1) Create DISK Group with NEW Storage ( Can we have different storage for DISK GROUPS???)
2) Mount the Database
3) COPY the DATAFILES using RMAN COPY command to new DISK Group.
4) Switch Datafile to COPY
5) RECOVER Database
6) DELETE old Datafile copy.
7) Open the database.
Are the above steps are correct for migrating data files???????
Also, please guide me to migrate OCR and Voting Disks to the new storage??????
Though your steps are possible but I would do another method if you want to keep the current diskgroup
1. prepare disks on new storage with same size with current storage disks
2. add new disks from new storage to existing diskgroup
SQL >alter diskgroup <diskgroup name> add disk
‘<new disk on new storage>’ rebalance power 10;
3. wait until the rebalance operation completes, check from v$asm_operation
4. delete old disks from old storage
SQL > alter diskgroup <diskgroup name> drop disk
<old disk> rebalance power 10;
5. see step 3
6. now move the ocr
# > ocrconfig -replace ocr <new disk>
# > ocrconfig -replace ocrmirror <new disk>
7. now move votingdisks
# > crsctl delete css votedisk <OLD_DISK> –force
# > crsctl add css votedisk <NEW_DISK> –force
Hope this helps
Cheers -
RAC does not start after trying to move storage
Hello,
We have a two nodes RAC Oracle 10g and ASM groups defined on one external storage.
RAC does not start after we reformated the storage to RAID 10.
What we did:
1) deleted the database
2) reformated the external storage to RAID 10 and defined needed volumes for OCR, VotingDisk and ASM
3) on both nodes
- recreated VotingDisk
node1:root$ /u01/oracle/product/10gr2/crs/bin/crsctl add css votedisk /dev/rdsk/c0t600A0B8000347E7D00000EE74A5AF386d0s3 -force
Now formatting voting disk: /dev/rdsk/c0t600A0B8000347E7D00000EE74A5AF386d0s3
successful addition of votedisk /dev/rdsk/c0t600A0B8000347E7D00000EE74A5AF386d0s3.
node2:root$ /u01/oracle/product/10gr2/crs/bin/crsctl add css votedisk /dev/rdsk/c0t600A0B8000347E7D00000EE74A5AF386d0s3 -force
Now formatting voting disk: /dev/rdsk/c0t600A0B8000347E7D00000EE74A5AF386d0s3
successful addition of votedisk /dev/rdsk/c0t600A0B8000347E7D00000EE74A5AF386d0s3.
- tried to move OCR but was able only on one node:
/u01/oracle/product/10gr2/crs/bin/ocrconfig -replace ocrmirror /dev/rdsk/c7t30d0s3
/u01/oracle/product/10gr2/crs/bin/ocrconfig -replace ocr /dev/rdsk/c7t29d0s3
/u01/oracle/product/10gr2/crs/bin/ocrconfig -replace ocr
These return ok for both node1 and node2:
node1:oracle$ cluvfy stage -post hwos -n node1
node1:oracle$ cluvfy stage -post crsinst -n node1,node2 -verbose
Performing post-checks for cluster services setup
Checking node reachability...
Check: Node reachability from node "node1"
Destination Node Reachable?
node1 yes
node2 yes
Result: Node reachability check passed from node "node1".
Checking user equivalence...
Check: User equivalence for user "oracle"
Node Name Comment
node2 passed
node1 passed
Result: User equivalence check passed for user "oracle".
Checking Cluster manager integrity...
Checking CSS daemon...
Node Name Status
node2 not running
node1 not running
Result: Daemon status check failed for "CSS daemon".
Cluster manager integrity check failed.
Checking cluster integrity...
Cluster is divided into 2 partitions.
Partition 1 consists of the following members:
Node Name
node1
Partition 2 consists of the following members:
Node Name
node1
node2
Cluster integrity check failed. Cluster is divided into 2 partition(s).
Checking OCR integrity...
Checking the absence of a non-clustered configuration...
WARNING:
CSS is probably working with a non-clustered, local-only configuration on nodes:
node1
Verification will proceed with nodes:
node2
Uniqueness check for OCR device passed.
Checking the version of OCR...
OCR of correct Version "2" exists.
Checking data integrity of OCR...
Data integrity check for OCR passed.
OCR integrity check failed.
Checking CRS integrity...
Checking daemon liveness...
Check: Liveness for "CRS daemon"
Node Name Running
node2 no
node1 yes
Result: Liveness check failed for "CRS daemon".
Checking daemon liveness...
Check: Liveness for "CSS daemon"
Node Name Running
node2 no
node1 no
Result: Liveness check failed for "CSS daemon".
Checking daemon liveness...
Check: Liveness for "EVM daemon"
Node Name Running
node2 no
node1 yes
Result: Liveness check failed for "EVM daemon".
Liveness of all the daemons
Node Name CRS daemon CSS daemon EVM daemon
node2 no no no
node1 yes no yes
Checking CRS health...
Check: Health of CRS
Node Name CRS OK?
node1 unknown
Result: CRS health check failed.
CRS integrity check failed.
Post-check for cluster services setup was unsuccessful on all the nodes.
Please help.Thanks for the answer.
Problem is that the RAC is not healty, I know how to start it but now it doesn't start and I cannot find helpful logs.
You can see that cluster is not healty from cluvfy output.
When I tried to start crs whith crsctl start crs but:
- on node2 none of the demons starts (CSS, CRS or EVM)
- on node1 CSS and EVM demons start but CRS is not starting and I cannot find helpful logs
Problem 2: Cannot change OCR location
node2:root$ cat /var/opt/oracle/ocr.loc
+#Device/file /dev/rdsk/c7t30d0s3 getting replaced by device /dev/rdsk/c7t30d0s3+
ocrconfig_loc=/dev/rdsk/c7t30d0s3
local_only=falsenode2:root$ ocrconfig -replace ocr /dev/rdsk/c0t600A0B8000347EAD00000F314A5AF5B8d0s3
PROT-1: Failed to initialize ocrconfig
node1:root$ cat /var/opt/oracle/ocr.loc
ocrconfig_loc=/u01/oracle/product/10gr2/db/cdata/localhost/local.ocr
local_only=TRUE
node1:root$ ocrconfig -replace ocr /dev/rdsk/c0t600A0B8000347EAD00000F314A5AF5B8d0s3
PROT-1: Failed to initialize ocrconfig
Problem 3: On node 1 I wrongly issued a command
node1:root$ /u01/oracle/product/10gr2/db/bin/localconfig reset
Successfully accumulated necessary OCR keys.
Creating OCR keys for user 'root', privgrp 'root'..
Operation successful.
Configuration for local CSS has been initialized
Adding to inittab
Startup will be queued to init within 30 seconds.
Checking the status of new Oracle init process...
Expecting the CRS daemons to be up within 600 seconds.
Giving up: Oracle CSS stack appears NOT to be running.
Oracle CSS service would not start as installed
Automatic Storage Management(ASM) cannot be used until Oracle CSS service is started -
Voting disk issue in Windows 2003 server
I installed oracle RAC 10g with ASM on windows server 2003 R2. I was able to successfully install clusterware as well as ASM with database. Prior to the install, I ran diskpart and then set automount enable. I was able to configure the ocr, ocrmirror and votedisk without any problem. After completion of the installation and then restarting both the nodes, looking at the Disk Management from the Computer Management, my first node is showing the partition for votedisk as raw disk but on the second node, I am seeing drive letters configured for the votedisks. I ran crsctl query css votedisk on both the nodes and both the nodes are pointing to the same location, \\.\votedsk1, \\.\votedsk2 and \\.\votedsk3.
Now my question is why am I seeing the drive letter(s) (G:) for the drives that were configured to votedsk from the second node and not seeing the drive letters from the first node?
Can I change the drive letter that were configured for voting disks from the second node?
I did take a backup of the votedsk using ocopy, but can this be a valid backup if I clear the drive letter on second node and then restore from the backup? I appreciate any help to correct this problem. ThanksI can perform delete and add another voting disk, But what about the drive letter that is showing on the second node and not on the first? Do I need to remove the drive letter showing on node 2 while the voting disk is still showing up prior to performing the delete and add of another voting disk? Thanks for your help.
Edited by: user8769472 on May 25, 2010 3:43 PM -
Help needed : How to move OCR and Voting Disk
Hi all experts...
I am Mahesh. Working in DXB as DBA. We have serveral RAC installed clients. Among those one major client wants their OCR and Voting Disk to be moved from existing SAN to a new SAN which will be configured. Only OCR and Voting Disks needs to be moved.
Details:
=====
Oracle Clusterware,ASM and DB version 10.2.0.3.0
Windows 2003 Server Enterprise Edition
2-Node RAC
OCR and Voting disks are on RAW devices (not on CFS or NFS)
I have read the clusterware administration document and also Metalink Note 428681.1 for the same.
But it does not contain information how to move it to another new RAW in a new SAN device. (we need to keep it in raw device itself)
How to identify the new disk path from windows operating system ? Then only we can move the OCR and VD right ???
Help me for the same please...
Thanks & regards,
Mahesh.Hi Mashes,
Could you list out the steps you did after you create the link on the new SAN using GUIObjectManager.exe?
I tried on my VM and also in customer's test environment but I only successful using the following steps
1. shutdown asm service, database service, listener service, CRS, EVM and CSS
2. Object Manager Service is kept running
3. from both nodes I issued the following command
ocrconfig -repair \\.\OCRPRIMARY
ocrconfig -repair \\.\OCRMIRROR
4. according to metalink id 428681.1, I should do the following
ocrconfig -overwrite
However I was not successful because that command returns an error message (PROT-1: Failed to initialize ocr config).
Therefore, I ran the following command
ocrconfig -restore D:\oracle\1020\CRS\cdata\crs\backup00.ocr
5. after that command, ocrcheck giving me the result and the ocr primary and mirror have been moved to the new partition.
6. start the whole services starting from CSS, EVM, CRS, ASM, Listerner and Database service.
Although what I experienced seems a bit weird and not the same as what was written in metalink, the RAC is running fine until now.
What I would like to know is your experience on this. May be you can share it here.
Thank you,
Adhika -
Slow query return when using TAOD
My colleague always use TAOD to run query. ( I tried hard to tell them not, believe me). Even I tuned one of their queries and the return became very fast in the SQLplus mode, the return in the TOAD window was still slow, 10 seconds vs 56 seconds. I wonder what reason that makes the return passing to TOAD slow. Some tuning of Oracle Net or it is on the TOAD side? It occurred when passing to Crystal Report. Any suggestion.
OK, I had applied both statistic optimizations on Dev box Oracle 10g (AIX), and asked my client to use her TAOD, it seemed faster. But I noticed that under the udump, the system generated a trc file with such content.
*** SESSION ID:(1064.11535) 2007-11-28 12:15:45.384
2007-11-28 12:15:45.380: [ OCROSD]utgdv:2:ocr loc file cannot be opened
2007-11-28 12:15:45.393: [ OCROSD]utopen:1: Couldnt find ocr,[ocrmirror] location in config file
2007-11-28 12:15:45.404: [ OCRRAW]proprinit: Could not open raw device
2007-11-28 12:15:45.408: [ default]a_init:7!: Backend init unsuccessful : [33]
2007-11-28 12:15:45.408: [ CSSCLNT]clsssinit: error(33 ) in OCR initializationI looked metalink and here, could not find any clue what it is about? -
Home DB error (404) and fails logs (Parameter was NULL)
Hello, I installed the oracle-xe by apt-get like in http://www.oracle.com/technetwork/topics/linux/xe-on-kubuntu-087822.html
I use Linux debian (mint) with KDE.
The installation and configuration was successful. BUT when I try open Home (http://127.0.0.1:8080/apex) return error 404.
This config was in port 8080
tati@desa462-linux:/usr/lib/oracle/xe/app/oracle/product/10.2.0/server/config/scripts > cat /etc/default/oracle-xe |grep HTTP# HTTP_PORT : HTTP port for Oracle Application Express
HTTP_PORT=8080
I run enviroment script like in http://docs.oracle.com/cd/B25329_01/doc/install.102/b25144/toc.htm#BABDGCHH
". /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/bin/oracle_env.sh"
no return errors and variables was defined.
listener port
tati@desa462-linux:~ > netstat -a | grep 1521
tcp 0 0 *:1521 *:* LISTEN
no-listener
tati@desa462-linux:~ > netstat -a | grep 8080
tati@desa462-linux:~ >
error log:
[ OCRUTL][4132255488]u_set_comp_error: Parameter was NULL
[ OCRUTL][4132255488]u_set_ocr_error: Parameter was NULL
2014-12-08 10:21:47.224: [ OCROSD][4132255488]utgdv:2:ocr loc file cannot be opened
2014-12-08 10:21:47.225: [ OCROSD][4132255488]utopen:1: Couldnt find ocr,[ocrmirror] location in config file
[ OCRUTL][4132255488]u_set_gbl_comp_error: Parameter was NULL
2014-12-08 10:21:47.225: [ OCRRAW][4132255488]proprinit: Could not open raw device
2014-12-08 10:21:47.225: [ default][4132255488]a_init:7!: Backend init unsuccessful : [33]
[ OCRUTL][4132255488]u_set_ocr_error: Parameter was NULL
2014-12-08 10:21:47.225: [ CSSCLNT][4132255488]clsssinit: error(33 ) in OCR initialization
Can any one help-me??You can have a look at other web applications in /webapps to see how correctly structured look like.
You can also read this (very old) but still informative post.
From what you say, it seems you have several challenges:
* web-inf is in lower case instead of uppercase
* the web application is named "uk" and not "demo-examples"
Have you tried with http://localhost:1020/uk/HelloWorld ? -
Ocrcheck shows Device/File not configured
Hi All,
I'm new to RAC administration. I just found this command and try to run in my system and this is the output.
./ocrcheck
Status of Oracle Cluster Registry is as follows :
Version : 2
Total space (kbytes) : 262120
Used space (kbytes) : 8236
Available space (kbytes) : 253884
ID : 979000182
Device/File Name : /u08/quorum/Quorum
Device/File integrity check succeeded
Device/File not configured
Cluster registry integrity check succeeded
What might have been wrong with the setup?
I am using 10gR2 and Oracle Cluster file system 2 (ocfs2): ocfs2-2.6.9-42.ELsmp-1.2.4-2.x86_64
running in 2.6.9-24-ELsmp RHEL4 AS OS.
Any help will be appreciated.
Thanks,
Jay Aoh ! sorry
if you use Oracle Server - Enterprise Edition - Version: 10.2.0.3
metalink Doc ID: 467216.1 Version: 10.2.0.3
This problem can occur on any platform.
# ocrconfig -replace ocr /dev/raw/raw4
PROT-1: Failed to initialize ocrconfig
ocrcheck
Status of Oracle Cluster Registry is as follows :
Version : 2
Total space (kbytes) : 293640
Used space (kbytes) : 4596
Available space (kbytes) : 289044
ID : 136413798
Device/File Name : /dev/raw/raw1
Device/File integrity check succeeded
Device/File not configured
Cluster registry integrity check succeeded Cause:
ocrconfig -replace can't be used to replace the only online OCR disk
As only 1 active OCR is available, -replace will not work.Solution:
1. Add a mirror:
#ocrconfig -replace ocrmirror /dev/raw/raw5
2. Replace the OCR:
#ocrconfig -replace ocr /dev/raw/raw4
3. Remove the mirror /dev/raw/raw5
#ocrconfig -replace ocrmirror
Maybe you are looking for
-
Rebate Volume Postings and Subsequent File Production
Vendors are set up in SAP as suppliers and given a certain number range . We call these the purchasing vendors. The purchasing vendor represents a very big company (like ABCD) that has manufacturing plants all across regions with head offices in one
-
Can't save a pdf file using the 'File' tab in FF4.
-
In CVI !!!! How to dynamic change BaudRate of RS232 Serial COM Without closing the Port !!!
Dear all: I want to change the buadrate of serial com without closing the serial com, but it failed when I use the function "SetCommConfig(m_hCom, &Com_cfg, Com_cfg_S) " to reset the buadrate ,baudrate is no change when use GetCommConfig to read ba
-
IOS 4.1 on 3G - Battery Meter Wrong
Has anyone had problems with the battery meter after updating to 4.1? The meter is correct while discharging, but not while charging. To get an accurate reading after a charge, the only solution I've found is rebooting the phone. I've tried several t
-
Trying to get an apple id and i am not recieving emails
trying to get apple id and am not recieving emals