OCS 10g - Does it support multiple domain hosting

Hi,
We have installed OCS 10g for a domain university.edu
Now, It provides only two available domains as local domains. ie, university.edu and .edu
I would like to add some more sub domains (at least one more) such as college.university.edu to be a local domain in OCS for which it should accept emails.
It this simple feature of multiple domain hosting supported in OCS.
Kindly let us know some tips for it.
Many thanks in advance.
maas.

I configured the domain about 2 years ago, so I have to go and look in my archive (which is at the office, I will not be there before the end of next week).
The setup has 2 top level domains (one is .nl and one is .com). Under .nl about 4 domains are running, under .com only 1. If I remember corretly issues did raise with files. Calendar and mail are running as expected. This is on a 9.0.4 release though (not a OCS 10 R1 or R2). I did read loads of articles and had to patch even more. Luckily I printed all articles I read, so I can lookup the exect document numbers. If you can wait until next week, I can help you out.

Similar Messages

HT201250 Hello i am using TimeMachine to back-up entire Mac image (data + system) on an usb-local drive. I would like (on top of it) add a specific plan to back up some files on a remote network drive. Does TimeMachine support multiple back-up plans ? How

Hello i am using TimeMachine to back-up entire Mac image (data + system) on an usb-local drive. I would like (on top of it) add a specific plan to back up some files on a remote network drive. Does TimeMachine support multiple back-up plans ? How ?

Time Machine is capable of backing up to multiple locations, and can be used to back up to both a local hard drive and a networked drive (provided that that drive is in or connected to a Time Capsule or another Mac that is sharing it over the network). The catch, though, is that you can't specify different things to back up to different destinations. Whatever you exclude from Time Machine backups is excluded from ALL backups, and whatever is included is included on all.
So, get a large enough drive that you can back up everything you want in all locations, or use something else for maintaining the network backup.
More information on these topics can be found here:
How do I set up Time Machine to a shared drive on another Mac?
How do I set up Time Machine to a Time Capsule or Airport Extreme?
"Rotating" Time Machine backup disks

Does JTree support multiple DnD?

I'm working on an applet which displays a JTree tree, which has to support multiple DnD.
i mean, user has to be capable of selecting several nodes at a time and drag all of them, dropping them into a target.
Though i have asked about it, and somebody told me about it, the solution was with a JFrame, and all the examples which work and i've read, arre with JFrame.
So i guess that maybe JTree does not support multiple DnD, and moreover, there is a website
http://bugs.sun.com/bugdatabase/view_bug.do?bug_id=4165577
in which someone says that, in fact, JTree does not support it. But it's and old page, so i want to know if at present, Jtree still has this debug.
Thanks in advance!

http://www.java-forum.org/de/viewtopic.php?p=139820#139820

Why java does not support multiple inheritance ???

Hai friends ..iam new to java .. i have doubt ..plz help me
Why java does not support multiple inheritance ???

The reasons for omitting multiple inheritance from the Java language mostly stem from the "simple, object oriented, and familiar" goal.
To understand multiple inheritance, the learner needs some level of expertise like virtual derivations etc in c++. Multiple inheritance will allow method duplication, and throws the learner into confusion which method might be called by the compiler in which scenario at run time.
Even though this answer seems to be funny, this is the actual reason why java omitted multiple inheritance of classes.
But java support multiple inheritance of interfaces. Multiple interface inheritance allows an object to inherit many different method signatures with the caveat that the inheriting object must implement those inherited methods.

Does endeca support multiple keyword search

Am new to endeca.
Does endeca support multiple keyword search in atg crs.
an eg can we search for "shirt,shoes" and get results for both

How specifically to implement this depends on how you are querying Endeca. With a simple URL parameter query using the UrlENEQuery object you would set the parameter of Ntx=mode+matchany, and if you were using the ENEQuery class you would set it like:
ENEQuery query = new ENEQuery();
ERecSearchList searchList = new ERecSearchList();
String matchMode = searchTerms.contains(",") ? "mode+matchany" : "mode+matchallpartial";
ERecSearch search = new ERecSearch( "your-search-interface", searchTerms, matchMode );
searchList.add( search );
query.setNavERecSearches( searchList );
If you are using the Assembler Service, you can include the Ntx parameter in the call, so you would wrap your call with some conditional logic, e.g.:
String serviceCall = null;
if( searchTerms.contains(",") ) {
serviceCall = "assember/xml/browse?Ntt=shirt,shoes&Ntx=mode+matchany";
} else {
serviceCall = "assember/xml/browse?Ntt=shirt,shoes&Ntx=mode+matchallpartial";
If you are using the Content Assembler API within your application, it will depend on how you are invoking it but some of the above should help you customise appropriately.
HTH
Michael

I am looking to turn my iPad into a portable device to store and view multiple files transferred from my pc. I have tried some apps but it does not support multiple sub folder transfers. Any suggestions please?

I am looking to turn my iPad into a portable device to store and view multiple files transferred from my pc. I have tried some apps but it does not support multiple sub folder transfers. Any suggestions please?

I use GoodReader on my iPad and use the GoodReaderUSB tool. the GoodReaderUSB tool allows you to transfer entire folders into GoodReader without loosing the folder/file structure.
Windows: http://www.goodiware.com/usb/GoodReaderUSBWin_200.zip
Mac: http://www.goodiware.com/usb/GoodReaderUSBMac_202.zip

WRT160N - does it support multiple vLan configurations?

I'm trying to find more detailed tech. specifications of this thing (WRT160N), but unfortunatelly I get only some basic marketing messages... I need to understand if this router supports vLAN configuration, as I'm thinking to have IPtv and internet on the same. My provider does integrates the IPtv into separate vLAN, but their HW is not too good in other perspectives... So I'm thinking about linksys.
So does it support multiple vLAN configuration (i.e. dedication of separate vLAN to exact port)?

No. VLANs are not supported in Linksys devices. You'll have to look at Cisco Small Business or better.

Supporting Multiple domains in IM&P with and Expressway deployment?

Hello everyone. This is long winded but the context is needed to explain what I'm looking for. Any help is appreciated.
My customer has piloted IM&P for 1 year now and is looking to take it to the next level. They purchased Expressway Core & Edge and they are looking to enable Mobile Remote Access, B2B Video and XMPP Federation. One issue is that the Jabber domain that was selected 1 year ago for the pilot was a local domain. The reason for this is because the multidomain support was not available at the time. Internally there are 3 domains. example.ca, examplesales.ca, and examplebanannas.com. Their Jabber ID they use today is example.root.local. I am reading through the guides and it seems as though IM&P allows you to map a JABBER ID to an email address or a directory URI. This will allow multiple presence domains within one Presence cluster. The problem is that it appears as though federation will not work through expressway core / edge if you use this method. Can this be confirmed?
I am providing you these URL's only for guidance, to show you how I arrived at my situation where I’m asking for help on a configuration change to my customers IM&P settings.
note the section on page 41 of the following guide http://www.cisco.com/c/dam/en/us/td/docs/telepresence/infrastructure/vcs/config_guide/X8-5/Mobile-Remote-Access-via-VCS-Deployment-Guide-X8-5-1.pdf
One would presume that Multi-domain support is now supported with expressway core & edge. The caveat I found on page 4 of the following guide in relation to xmpp federation.
http://www.cisco.com/c/dam/en/us/td/docs/telepresence/infrastructure/vcs/config_guide/XMPP-Federation-with-Cisco-VCS-and-IM-and-Presence-Service.pdf
and page 10 of the following guide
http://www.cisco.com/c/dam/en/us/td/docs/telepresence/infrastructure/vcs/config_guide/X8-5/XMPP-Federation-with-Cisco-VCS-and-IM-and-Presence-Service.pdf
and this section
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/im_presence/interdomain_federation/10_5_1/CUP0_BK_I07B7052_00_integration-guide-interdomain-federation-105/CUP0_BK_I07B7052_00_integration-guide-interdomain-federation-105_chapter_01010.html#CUP0_RF_CAF8AEDD_00
Expressway-E does not support XMPP address translation (of email addresses, for example). If you are using Expressway-E for XMPP federation, you must use native presence Jabber IDs from IM and Presence Service.
This being said
Based on my findings, I believe Cisco now supports multi-domain setup for IM&P with the "caveat" federation still doesn't work. My customer is not happy with this but still would like to proceed with the rest of the benefits that MRA brings to the table for their Jabber deployment.
To support the above scenario it is my understanding I need to make an adjustment to the configuration of IM&P. As I stated when I opened the case my customer’s current IM&P domain is “example.root.local” their JID is made up of [email protected]. It’s my understanding we cannot use this domain and activate MRA so we need to adjust everyone’s JID to be a Publicly routable DNS name. Since everyone that has a JABBER account also has an email account I was thinking we map the JID to the email. I’m trying to understand how to get from where we are to where we need to be. I found this guide but it doesn’t talk about the effects of doing this on a live system setup the way my customer is setup.
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/im_presence/interdomain_federation/10_5_1/CUP0_BK_I07B7052_00_integration-guide-interdomain-federation-105/CUP0_BK_I07B7052_00_integration-guide-interdomain-federation-105_chapter_01100.html
I am also not certain this is the setting I’m looking for. I believe what I need to change is actually on the Presence server under the domains section I found this
Domains Configuration
Use the controls on this window to view and edit domains managed by the IM and Presence Service. Previously, the IM and Presence Service supported a single domain. With this release, you can specify multiple domains.
Before You Begin
To take advantage of multiple IM and Presence Service domains, you must choose Directory URI as the IM address scheme on the Advanced Presence Settings window. If the IM address scheme is set to UserID@domain, the default domain is used for the IM and Presence Service. The status of the IM Address Scheme setting is displayed at the top of the window in the Status box. The Status box contains a link to the Advanced Presence Settings window.
Is this what I need to do?

Hello everyone. This is long winded but the context is needed to explain what I'm looking for. Any help is appreciated.
My customer has piloted IM&P for 1 year now and is looking to take it to the next level. They purchased Expressway Core & Edge and they are looking to enable Mobile Remote Access, B2B Video and XMPP Federation. One issue is that the Jabber domain that was selected 1 year ago for the pilot was a local domain. The reason for this is because the multidomain support was not available at the time. Internally there are 3 domains. example.ca, examplesales.ca, and examplebanannas.com. Their Jabber ID they use today is example.root.local. I am reading through the guides and it seems as though IM&P allows you to map a JABBER ID to an email address or a directory URI. This will allow multiple presence domains within one Presence cluster. The problem is that it appears as though federation will not work through expressway core / edge if you use this method. Can this be confirmed?
I am providing you these URL's only for guidance, to show you how I arrived at my situation where I’m asking for help on a configuration change to my customers IM&P settings.
note the section on page 41 of the following guide http://www.cisco.com/c/dam/en/us/td/docs/telepresence/infrastructure/vcs/config_guide/X8-5/Mobile-Remote-Access-via-VCS-Deployment-Guide-X8-5-1.pdf
One would presume that Multi-domain support is now supported with expressway core & edge. The caveat I found on page 4 of the following guide in relation to xmpp federation.
http://www.cisco.com/c/dam/en/us/td/docs/telepresence/infrastructure/vcs/config_guide/XMPP-Federation-with-Cisco-VCS-and-IM-and-Presence-Service.pdf
and page 10 of the following guide
http://www.cisco.com/c/dam/en/us/td/docs/telepresence/infrastructure/vcs/config_guide/X8-5/XMPP-Federation-with-Cisco-VCS-and-IM-and-Presence-Service.pdf
and this section
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/im_presence/interdomain_federation/10_5_1/CUP0_BK_I07B7052_00_integration-guide-interdomain-federation-105/CUP0_BK_I07B7052_00_integration-guide-interdomain-federation-105_chapter_01010.html#CUP0_RF_CAF8AEDD_00
Expressway-E does not support XMPP address translation (of email addresses, for example). If you are using Expressway-E for XMPP federation, you must use native presence Jabber IDs from IM and Presence Service.
This being said
Based on my findings, I believe Cisco now supports multi-domain setup for IM&P with the "caveat" federation still doesn't work. My customer is not happy with this but still would like to proceed with the rest of the benefits that MRA brings to the table for their Jabber deployment.
To support the above scenario it is my understanding I need to make an adjustment to the configuration of IM&P. As I stated when I opened the case my customer’s current IM&P domain is “example.root.local” their JID is made up of [email protected]. It’s my understanding we cannot use this domain and activate MRA so we need to adjust everyone’s JID to be a Publicly routable DNS name. Since everyone that has a JABBER account also has an email account I was thinking we map the JID to the email. I’m trying to understand how to get from where we are to where we need to be. I found this guide but it doesn’t talk about the effects of doing this on a live system setup the way my customer is setup.
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/im_presence/interdomain_federation/10_5_1/CUP0_BK_I07B7052_00_integration-guide-interdomain-federation-105/CUP0_BK_I07B7052_00_integration-guide-interdomain-federation-105_chapter_01100.html
I am also not certain this is the setting I’m looking for. I believe what I need to change is actually on the Presence server under the domains section I found this
Domains Configuration
Use the controls on this window to view and edit domains managed by the IM and Presence Service. Previously, the IM and Presence Service supported a single domain. With this release, you can specify multiple domains.
Before You Begin
To take advantage of multiple IM and Presence Service domains, you must choose Directory URI as the IM address scheme on the Advanced Presence Settings window. If the IM address scheme is set to UserID@domain, the default domain is used for the IM and Presence Service. The status of the IM Address Scheme setting is displayed at the top of the window in the Status box. The Status box contains a link to the Advanced Presence Settings window.
Is this what I need to do?

Multiple domains hosted on one OSX Server

Hi guys,
Does anyone know if it is possible to host more than one domain name on OSX server?
A client of mine runs a number of businesses and is considering Snow Leopard Server, and wants to have multiple email domains and websites hosted on one server. Also per-account contacts sync and calendar sync would be useful, does anyone know if that's available?
Thanks!
W.

You can certainly host multiple domains on Mac OS X Server. There are a few options depending on how you want it to work.
If all the usernames are the same across all domains (e.g. [email protected] is the same person as [email protected]) then just change the mail server configuration to match all the domains in the mydestination parameter in /etc/postfix/main.cf.
If the domains are different (e.g. [email protected] is not the same account as [email protected]) then you have two options - one is to use the postfix model (which requires command-line management), the other is to add the email addresses in the shortname section for each user.
You may have some issues integrating contacts and calendars, though - if you take the postfix model then the users won't exist in Open Directory and won't have a calendar/contact link, etc.
If you follow the shortname model then you have one directory with all users in all domains and you'll need to work to separate them out if you need to.

RDBMS Security Store supporting multiple domains

Can one instance of the RDBMS Security Store be utilized to support multiple WLS 10.3.2 domains?
I have several 10.3.2 domains, all of which have clusters and role requirements? The documentation 'suggests' one Store per domain, but all of the tables in the schema contain DOMN (domain) and REALMN (realm) columns that would seem to indicate domain independence. It would be nice to be able to manage one Store schema that supports several Domains.

Hi,
The document which you are referring is for WLS 10.0 and RDBMS security is introduced from WLS 10.3.0 onwards.
The reason why RDBMS security store should not be stored between two domains is RDBMS security store is used by authorization, role mapping, credential mapping, and certificate registry providers.
Once the RDBMS security store is configured in a domain, an instance of any of the preceding security providers that has been created in the security realm automatically uses only the RDBMS security store as a datastore, and not the embedded LDAP server.
It is just the replacement for Embedded LDAP.
Thanks & Regards,
Murali.
============

OCS 10g, does it comes with a Certification Authority?

Hi,
does the AS that comes with OCS 10g has the oracle application server certificate suite and can i use it to "generate/validate" certificates for my enterprise????????
Regards, Luis

yes, it comes the 10.1.2.0.2 version of AS

Does Siri support multiple languages

I live and work in a multilingual environment. As a result, I often have to send SMS and emails in English, French, Italian or Portuguese. With the keyboard, I am used to switch language with the globe key next to the spacebar. With Siri however I am not sure how this can work. When it does eventually support the above languages, will I be able to use different languages without changing the whole telephone setting? Can one say "send email to my wife: buongiorno amore"? It would be a real letdown if the coolest feature of iOS 5 were unusable to me...
Thanks

Yes, exactly. I am using Siri in English since she gets better along with the rather easy synthax (compared to German). Unfortunately you cannot switch directly when writing a message. For example, if you tell her to "write a message to my wife", you may immediately dictate what you want to say but only in English. If I want to write her in German instead, I will have to tap once on the message area. She then instantly changes to German (or any other language that was used as keyboard before) which also affects Siri's voice recognition. But one tap is reasonable.

PM : Does PM support multiple Class types for Equipment classification

Hi,
Do Plant maintenance support multiple class types for the classification for the equipments.
Our Customer has created his own class type other than 002(Equipment) for the classification and wants to know weather PM supports such class types or not.
Thanks and Regards,
Anuj
Edited by: Anuj Goyal on Mar 13, 2008 10:16 AM

hi
i think you can use the your own class type provided you have done all the settings related to the standard class type 002,also if you have create your class type your standard class type will be changed to either the newly created one or 002 based on settings made by you
regards
thyagarajan

Designer 6.0 does not support multiple homes

I installed oracle 8i database version 8.1.6 on my windows NT 4.0 laptop. I need to also install designer 20000 version 6.0 on the same laptop but I get the following errors.
The location e:\oracle \oracle8i is already used as an oracle home for oracle 816 production. It can not be uses as an oracle home for NT.
I then designate a new directory and home name, and get the following errror.
Designer release 6.0 does not support multple home installations and suggest me to change it back to my first choice.
How do I get both the oracle database and designer installed on the same machine without Oracle home problem?
null

Hi,
Install designer 6 first in DeFAULT_HOME, directory ORANT. After you've done that, install Oracle 816.
See reply to Davephobbs
HTH
Martin

How Java does not support multiple inheritance

Hi,
I have got a small doubt....
Generally it is said thatjava does not support multipleinheritance.I agree.
But then we know that every class in java by default is a sub class of Object class then how is it possible to inherit one more class using extends keyword.
I am confused?
Akshatha

Generally it is said thatjava does not support
multipleinheritance.I agree.Generaly, this is wrong. Java does support MI, just not MI of implementation. You can extend as many interfaces as you like.
But then we know that every class in java by default
is a sub class of Object class then how is it
possible to inherit one more class using extends
keyword.It is not possible. You can only extend directly from one single class. If you extend from something else than Object, you're not directly extending Object anymore.

OCS 10g - Does it support multiple domain hosting

Similar Messages

Maybe you are looking for