OCS 2007 R2 with SQL 2005 database mirroring failover?
We have OCS 2007 Enterprise Edition installed fine and with the databases mirrored to a backup server/location. I'm testing our environment for a potential disaster, including losing our primary SQL server (SQL 2005). I fail the databases over and update the backend pool to the backup SQL server name, but we cannot connect via Office Communicator and I see this error on the OCS server:
OCS User Services, error category 1006, event id 30962:
Connection to back-end database succeeded, but failed to execute registration stored procedure on the back-end. This error should not occur under normal operating conditions. Contact product support.
Back-end Server: databkp Database: rtc Sql native error: 515 Connection string of:
driver={SQL Native Client};Trusted_Connection=yes;AutoTranslate=no;server=databkp;database=rtc;
Cause: Possible issues with back-end database.
Resolution:
Ensure the back-end is functioning correctly.
Can anyone shed some light on this SQL 515 error? Thanks in advance!
-Erik
We're having a similar issue but with error number 601. I've tried a million different things aside from restoring the database, which may be next. I tried editing the procedure and I *think* I edited the right lines 77 and 105 for me. Changed:
delete dbo.DbConfigDateTime
from @DbTime as t
where dbo.DbConfigDateTime.Name = t.ValueName
and t.StoredDbName = N'rtc'
and t.Value is null
to:
delete dbo.DbConfigDateTime
from @DbTime as t
where dbo.DbConfigDateTime.Name = t.ValueName
and t.StoredDbName = N'rtc'
and t.Value is not null
and
delete rtcdyn.dbo.DbConfigDateTime
from @DbTime as t
where rtcdyn.dbo.DbConfigDateTime.Name = t.ValueName
and t.StoredDbName = N'rtcdyn'
and t.Value is null
to:
delete rtcdyn.dbo.DbConfigDateTime
from @DbTime as t
where rtcdyn.dbo.DbConfigDateTime.Name = t.ValueName
and t.StoredDbName = N'rtcdyn'
and t.Value is not null
Not sure if that's where the modification is supposed to go. Any clarity here? Anyone else get a 601 error?
Similar Messages
-
Crystal 8.5 connection with Sql 2005
Post Author: sgtpep
CA Forum: Semantic Layer and Data Connectivity
Hello all,I'm not sure this is the right forum group to post in, but here it goes:I have a problem when trying to print my crystal 8.5 reports through a sql 2005 native client.Some of them work just fine, but i get this error: "print job failed cannot open sql server" for others.I've been doing a little research, but i can't seem to find a definitive answer on this topic: Can/Does crystal 8.5 work with sql 2005 databases.I did find something about upgrading my drivers, but i'm not sure where to find them and what i should be looking for.Thanks in advance for your help,EricI see - the field notice does mention ICM 7.2(7)ES139.
Multiple occurrences of this issue have been observed since October 14, 2010
and on all Unified ICM/CCE releases. This is not a regression defect. The issue
occurs when a Microsoft SQL Server query operation is performed to compare the
'lastUpdateKeys' on AW and Central Controller/Logger, during the incremental
copying of configuration changes to the local AW. In addition, using the ICMDBA
tool to backup and restore the database with "Truncate Config Message Log"
option checked can lead to a similar issue that causes the ICM/CCE Router to
reject configuration updates. No UpdateAW restart is observed in this
situation.
I mistakenly thought it was caused by the SQL upgrade from 2000 to 2005.
By the way, regarding defect CSCtj65060, I NEVER check that "Truncate Config Message Log" option when exporting the config.
Regards,
Geoff -
IPC 4.0 Standalone with SQL 2005 Express as a database
Hello,
I am trying to setup IPC 4.0 standalone up for a training class on a XP laptop with SQL 2005 Express as the database. I keep getting login errors connecting the IPC admin.bat tool to the sql database. And yes, I know this is not 'officially' supported by SAP, but I see no technical reason why it shouldn't work and yes my port is correct. My entries are as such:
Alias: 00_230
Server: localhost
System: Microsoft SQL Server
Database Name: 00_230
port: 1433
User: ipc
password: hidden
client: 230
Is everything I entered correct? Am I missing anything that I need?
Thanks!Hi Jeff.
You will probably have problems with the database subsystem, when you upgrade to UccX7.0.1 if the 3rd party database is af SQL2k5 server.
There is a fix for that problem, check below :
Upgrading UCCX to 7.0(1)Sr4 is failing ODBC connection to SQL 2005.
Symptom:
Upgrading the UCCX server to 7.0(1) Sr4 and OS to 2003.1.4a SR11 is failing the ODBC connection to SQL 2005 external database. (also a problem in new installations)
The error generated when trying to setup a ODBC connection to SQL 2005 database is
======
[Microsoft][ODBC SQL Server Driver][DBNETLIB]SQL Server does not exist or access denied.
=======
Conditions:
Upgrade to UCCX 7.0(1) Sr3 or 4 and OS upgrade to 2003.1.4a SR11
Workaround:
Work around:
a) In UCCX SQL Server 2000 - Start the Client Network Utility. (cliconfg.exe is used from MSDE versions of UccX)
b) On the General tab, add TCP/IP in the list under Enabled protocols by order. (make sure its first)
c) Click the Alias tab, and then click Add. Under Network libraries, select TCP/IP.
d) In the Server name text box, type the IP address of the server that is running SQL Server
2005.
Note:
If port other that 1433 is being used Click the check box to clear the Dynamically determine port option, and then type the port number of the instance of SQL Server 2005 in the Port number text box.
Regards
\Søren Lavard -
SAP IDES ECC5.0 (SQL 2005 Database) installation Error at Database instan.
At the time IDES ECC 5.0 installation (SQL 2005 database), I was copy all DVD on Hard drive and start setup then at installation of database instance, following Errors are occured. so I cant continue with the installation, if anyone have installation guide/or solve the following error please mail me at [email protected]
from Log file SAPCLUST
Interface access functions from dynamic library dbmssslib.dll loaded.myCluster
(3.5.Imp): 613: error when retrieving table description for physical table AABLG.
myCluster (3.5.Imp): 614: return code received from nametab is 32
myCluster (3.5.Imp): 296: error when retrieving physical nametab for table AABLG.
(CNV) ERROR: code page conversion failed
rc = 2
from sappool.log
Interface access functions from dynamic library dbmssslib.dll loaded.failed to read short nametab of table ARCH_NUM (rc=32)conversion failed for row 0 of table VARKEY = ⁘
(CNV) ERROR: code page conversion failed
So please send me solution/ or any configuration need for SQL 2005 / installation guide thanksThis may be hard disk problem, some file not able to write on HDD.
Regards
Rajnish -
IPCC 4.0(5) with Sql 2005 Enterprise DB
Hello,
I currently have IPCC 4.0(5) (no SR) doing with an ODBC connection to a SQL 2000 server. I am preparing to upgrade the SQL 2000 server to SQL 2005 (only upgrading a SQL server, not touching SQL 2000 running on IPCC).
According to the document in the link below, support for SQL 2005 as an enterprise db was not posted until IPCC 4.0(5) SR2. I will be upgrading to IPCC 7.x very soon, but need to buy time and avoid touching IPCC 4.0(5). Does anyone know if the ODBC connection from IPCC 4.0(5) will connect to a SQL 2005 server?
http://www.cisco.com/en/US/docs/voice_ip_comm/cust_contact/contact_center/crs/express_compatibility/matrix/crsmatrxeol.pdf
Thanks,
JeffHi Jeff.
You will probably have problems with the database subsystem, when you upgrade to UccX7.0.1 if the 3rd party database is af SQL2k5 server.
There is a fix for that problem, check below :
Upgrading UCCX to 7.0(1)Sr4 is failing ODBC connection to SQL 2005.
Symptom:
Upgrading the UCCX server to 7.0(1) Sr4 and OS to 2003.1.4a SR11 is failing the ODBC connection to SQL 2005 external database. (also a problem in new installations)
The error generated when trying to setup a ODBC connection to SQL 2005 database is
======
[Microsoft][ODBC SQL Server Driver][DBNETLIB]SQL Server does not exist or access denied.
=======
Conditions:
Upgrade to UCCX 7.0(1) Sr3 or 4 and OS upgrade to 2003.1.4a SR11
Workaround:
Work around:
a) In UCCX SQL Server 2000 - Start the Client Network Utility. (cliconfg.exe is used from MSDE versions of UccX)
b) On the General tab, add TCP/IP in the list under Enabled protocols by order. (make sure its first)
c) Click the Alias tab, and then click Add. Under Network libraries, select TCP/IP.
d) In the Server name text box, type the IP address of the server that is running SQL Server
2005.
Note:
If port other that 1433 is being used Click the check box to clear the Dynamically determine port option, and then type the port number of the instance of SQL Server 2005 in the Port number text box.
Regards
\Søren Lavard -
Not able to connect with Sql Server Database
Hi,
I'm not able to connect with Sql Server database.during making connection I'm getting the following error:
"Status : Failure -I/O Error: SSO Failed: Native SSPI library not loaded. Check the java.library.path system property."
Please help
Regards,
Neeraj GoelHi,
I'm using Sql Server 2000.
I downloaded the driver from the given site and still having the same problem. Do I need to copy the driver file in some specific folder.
Regards,
Neeraj Goel -
Hi Pls help me, How to work with SQL 2000 Database
I have database using SQL 2000, How to connect and work with SQL 2000 Database. thanks
Log on to www.SQLite.org that may help you.
Using the Sqlite3.dll and after customizing your code with SQLite3.h you can read and write on to that DB. -
I have created Web service VI ("Prikaz insolacije.vi") which has two input string terminals (FROM / TO) for dates and two output terminals for data (1-D array) collected from database (MS SQL server). This VI communicates with database using functions from database palette with appropriate DSN and SQL query. There are two tables with two data columns (Time and Insolation) in Database.
This VI works when you run it in Labview 2010, but when I used it as sub VI in UI builder it doesn't return any data.
Could you please help me find a solution. Is it possible to communicate with SQL server database this way or there is another way?
There are two attachmet files: Image of .vix file in UI builder and .vi file ("Prikaz insolacije.vi")
Please help me ASAP!
Thanks,
Ivan
Solved!
Go to Solution.
Attachments:
vix file in UI builder.png 213 KB
Prikaz insolacije.vi 35 KBStatus is False and source string is empty. It behaves like there is no code in VI.
I tried to access web service directly using following URL:
http://localhost:8080/WSPPSunce/Prikaz_insolacije/2009-11-05/2009-11-01
and it doesn' t work. It returns zeros.
The response is:
<Response><Terminal><Name>Insolacija</Name><Value><DimSize>0</DimSize></Value></Terminal><Terminal><Name>Vrijeme</Name><Value><DimSize>0</DimSize></Value></Terminal></Response> -
Change the sql 2005 database C drive to E drive
hi,
it is possible to change the sql 2005 database C drive to E drive
if ,yes then step:-?
Regards
AmitHello Amit,
>it is possible to change the sql 2005 database C drive to E drive
>if ,yes then step:-?
You can also check note [363018|http://service.sap.com/sap/support/notes/363018].
Regards,
Eduardo -
CLEANUP_USESSAUD is locked in MS SQL 2005 database
Hi team,
CLEANUP_USESSAUD stored procedure is encrypted bydefault in MS SQL 2005 database.
May i know, how to unlock and modify this procedure?Hi,
We have used a utility called Optillect to look into the encrypted stored procedures.
Regards
Alex -
We need to move an SQL DB, so we decided to upgrade at the same time.
The upgrade will be both in software and hardware.
My question, can we setup a mirror between SQL 2012 and SQl 2005 in order to migrate the DB's to new hardware and SQL instance?
Thanks!Hi wmikef,
We cannot set up a mirror between SQL Server 2012 and SQL Server 2005. Please note that the
prerequisites for setting up database mirroring.
• For a mirroring session to be established, the partners and the witness, if any, must be running on the same version of SQL Server.
• The principal server and mirror server, must be running the same edition of SQL Server. The witness, if any, can run on any edition of SQL Server that supports database mirroring.
• The database must use the full recovery model.
• Verify that the mirror server has sufficient disk space for the mirror database.
• Make sure that you restore the backup of the principal database specifying the same database name WITH NORECOVERY when creating the mirror database on the mirror server.
For more information, please review the following article.
http://msdn.microsoft.com/en-us/library/ms366349.aspx
Thanks,
Lydia Zhang
If you have any feedback on our support, please click
here. -
Cann't Drag and Drop Tabels from MS SQL 2005 Database using JDBC connectio
I've created a I've installed cr4e-all-in-one-win_2.0.1 (Crystal Reports for Eclipse) created a new Connection with MS-2005 SQL using SQLJDBC.jar file, Connection is working and I can see all Databases and under dbo schema.
My problem is when i try to add database in my report (using drag and drop or via option menu) nothing happens... there's no error please guideHi K,
First of all, thank you so much for your help and advice.
When i create the repository, i encountered below error in compiler log;
Error(26,2): PL/SQL: SQL Statement ignored
Error(29,23): PL/SQL: ORA-00904: : invalid identifier
Error(2486,9): PL/SQL: Statement ignored
Error(2486,30): PLS-00201: identifier 'DBMS_LOB' must be declared
Error(2487,9): PLS-00201: identifier 'DBMS_LOB' must be declared
Error(2487,9): PL/SQL: Statement ignored
Error(2488,9): PLS-00201: identifier 'DBMS_LOB' must be declared
Error(2488,9): PL/SQL: Statement ignored
Error(2559,5): PL/SQL: Statement ignored
Error(2559,26): PLS-00201: identifier 'DBMS_LOB' must be declared
Error(2560,5): PLS-00201: identifier 'DBMS_LOB' must be declared
Error(2560,5): PL/SQL: Statement ignored
Error(2561,5): PLS-00201: identifier 'DBMS_LOB' must be declared
Error(2561,5): PL/SQL: Statement ignored
When i right click on those errors and click 'go to source', it doesn't go anywhere.
But it mentioned that repository created successfully.
So that I tried to quick migrate and got below migration error:
Error ocurred during capture:
ORA-04063: package body "REPOOWNER.MD_META" has errors
ORA-06508: PL/SQL: could not find program unit being called: "REPOOWNER.MD_META"
ORA-06512: at "REPOOWNER.MD_PROJECTS_TRG", line 3
ORA-04088: error during execution of trigger 'REPOOWNER.MD_PROJECTS_TRG'
I really don't know how to solve this.
Thus, please help to advice how to solve on this matter and I do really appreciate your help.
Thank you so much for all your help.
Edited by: Sai Lin Naung on May 30, 2010 8:32 PM -
HA Installation of ERP 6 With SQL 2005 Server Problem.
hi ,
i have two blade server with windows 2003 Enterprise and cluster configure on them as prescribe by the note of Microsoft.
now i have installed MS Sql 2005 Server as said by the SAP Documentation on first node and it was sucessfull . after that i installed ABAP (ASCS) SCS on first node and it was installed too . now i am stuck at the process of FIRST MSCS NODE step
the installation note says :-
7.4.5Configuring the First MSCS Node
To configure the first MSCS node so that it functions properly in MSCS, you have to run the cluster configuration option offered by the SAPinst tool. When you run this option it:
Creates the SAP cluster group
Copies tools to the SAPCluster directory
Sets the SAPService to manual
Makes sure that the SAPOsCol service starts from the SAPCluster directory
this says cluster configuration option but i can't find it any where and i don't know how the %windows%/sapcluster dir creates do i have to create it manually if so then how, the sap document says as follows :-
SapCluster Directory
In an SAP cluster installation, an additional directory u2013 %WINDIR%\SapCluster u2013 is created under the system directory.
This contains all the SAP files required by all MSCS cluster nodes, independently of the MSCS node the SAP instance is running on. The files are database tools and program files (executables) used by the operating system monitor (SAPOsCol).
The directory is added to the path variable of the user <sapsid>adm.
can any one help me in this .
thanks in advancedthanks for response , at the phase FIRST MSCS NODE it stuck
the R3CLUS.LOG file is as follows :-
24.8.2010, 13:14:26, ntclsapclus.cpp, 213, Entry: InstallSAPResourceType
24.8.2010, 13:14:26, ntclsclinst.cpp, 58, Entry: Sclinstsrct::Create
24.8.2010, 13:14:26, ntclsclinst.cpp, 79, CreateClusterResourceType RC= 183
Cannot create a file when that file already exists.
24.8.2010, 13:14:26, ntclsclinst.cpp, 91, DllRegisterCluAdminExtension RC= 0
24.8.2010, 13:14:26, ntclsclinst.cpp, 102, DllRegisterServer RC= 0
24.8.2010, 13:14:26, ntclsclinst.cpp, 116, Exit: Sclinstsrct::Create RC= 0
24.8.2010, 13:14:26, ntclsapclus.cpp, 215, Exit: InstallSAPResourceType RC= 0
and SAPINST.LOG file say's in last lines:-
INFO 2010-08-24 13:15:26.655
Execute step dGetSAPClusterParameters of component |MSCS_A|windows|ind|ind|ind|0|0|CollectClusterParameters|windows|ind|ind|ind|3|0
WARNING[E] 2010-08-24 13:15:26.670
MUT-03028 Number value 0x-3f580000 is bigger than 0xFFFFFFFF.
ERROR 2010-08-24 13:15:26.824
FCO-00011 The step dGetSAPClusterParameters with step key |MSCS_A|windows|ind|ind|ind|0|0|CollectClusterParameters|windows|ind|ind|ind|3|0|dGetSAPClusterParameters was executed with status ERROR .
and SAPINST_DEV.LOG say's in last lines :-
WARNING[E] 2010-08-24 13:15:26.670
CJSlibModule::writeError_impl()
MUT-03028 Number value 0x-3f580000 is bigger than 0xFFFFFFFF.
TRACE 2010-08-24 13:15:26.793 [iaxxejsbas.hpp:483]
EJS_Base::dispatchFunctionCall()
JS Callback has thrown unknown exception. Rethrowing.
ERROR 2010-08-24 13:15:26.824 [sixxcstepexecute.cpp:950]
FCO-00011 The step dGetSAPClusterParameters with step key |MSCS_A|windows|ind|ind|ind|0|0|CollectClusterParameters|windows|ind|ind|ind|3|0|dGetSAPClusterParameters was executed with status ERROR .
TRACE 2010-08-24 13:15:26.840 [iaxxgenimp.cpp:752]
CGuiEngineImp::showMessageBox
<html> <head> </head> <body> <p> An error occurred while processing option SAP ERP 6.0 EHP4 Ready - Support Release 1 > SAP Application Server ABAP > MS SQL Server > High-Availability System > First MSCS Node. You can now: </p> <ul> <li> Choose <i>Retry</i> to repeat the current step. </li> <li> Choose <i>View Log</i> to get more information about the error. </li> <li> Stop the option and continue with it later. </li> </ul> <p> Log files are written to C:\Program Files/sapinst_instdir/ERPEhP4/AS-ABAP/MSS/HA/MSCS-A.
TRACE 2010-08-24 13:15:26.840 [iaxxgenimp.cpp:1255]
CGuiEngineImp::acceptAnswerForBlockingRequest
Waiting for an answer from GUI
help needed........
Edited by: Eric Brunelle to fix HTML tags on Aug 24, 2010 9:15 AM -
Xp_logininfo "Installation problem on windows 2003 with Sql 2005"
Hi every one
I am facing a problem during the installation of Solution Manager 4.0 on Windows 2003 server with Ms Sql 2005, I received the following error
Msg 15404, Level 16, State 19, Procedure xp_logininfo, Line 60.
Its some how look likes that the user "SID"ADM
Can any one give me a clue
thanks
Kind Regards
SohailHi All,
This would solve your problem
First of all this error is <b>MSSQL error</b>.
When you perform an action on an instance of SQL Server that requires SQL Server to resolve the credentials of a Microsoft Windows NT domain user account, you may receive an error message that is similar
Server: Msg 8198, Level 16, State XX, Procedure <Stored Procedure Name>, Line <line Number>
Could not obtain information about Windows NT group/user '<Domain\Account Name>'.
To resolve the credentials of a Windows NT domain user account, SQL Server uses the xp_logininfo system stored procedure. Here is a list of the common scenarios where you may notice that the xp_logininfo system stored procedure fails and causes the 8198 error.
When you use an xp_sendmail extended stored procedure.
When you set up replication.
When you run a SQL Server Agent job.
SQL Server may run the xp_logininfo system stored procedure to retrieve information about the Windows domains and the user accounts, even if the user does not do so explicitly. Therefore, if you receive an 8198 error message and the error message mentions the xp_logininfo system stored procedure as the procedure, you must use <b>SQL Profiler</b> to trace and to troubleshoot the exact point of failure.
You can go through this link for more info...
http://support.microsoft.com/?kbid=834124
Feel Free to Revert back...
--Thanks and Regards,
Ragu
ERP,
Suzlon Energy Limted, Pune
Extn: 2638
+919370675797
I have no limits for others sky is only a reason -
Sql developer won't connect with SQL server database on cluster
Hello,
I have a microsoft SQL server database on a windows cluster. Name for this cluster is like XXX/YYY
When I try to connect to this database with SQL developer, I get a failure, mentioning:
"Status : Failure -Cannot connect to Miscrosoft SQL Server on XXX/YYY"
As far as I know, I have installed the correct jtds driver (version 1.2.5), since I can connect to sql server databases on single server hosts.
Does anyone know how to connect to databases on windows clusters?
Edited by: Ingmar on Jan 16, 2012 4:08 PM
Edited by: Ingmar on Jan 16, 2012 4:22 PMHi Ingmar,
Try this is in the port box
1433/dbname;instance=YYY
dbname can be omitted
-Turloch
SQL Developer team
1/Giving an instance name in SQLDeveloper connection to SQL Server (from August 2011)
MS SQL Server Connection
The correct syntax to deal with this is in the port box
1433/dbname;instance=instance
dbname can be omitted
2/cluster configuration (uses instance name)
http://stackoverflow.com/questions/1160024/jdbc-connect-string-for-sql-server-cluster
where vvv\iii is the cluster address: jdbc address is:
"jdbc:sqlserver://vvv;instanceName=iii"
3/jtds url details available in
http://jtds.sourceforge.net/faq.html
Maybe you are looking for
-
How to create a border around an AP DIV
Can anyone tell me how to do this? Seems like a simple request - hopefully it is! Also, how do I change the border color? Thanks!
-
I'm trying to prepare our school system for Windows 7 (we currently use XP). I would like to use the new Group Policy Preferences method of deploying printers. I pushed out the XP client side extensions through WSUS. In my test environment, I adde
-
When will the itunes store update my podcast episodes?
Well, here it is a month now, and iTunes is still not updating my recent episodes in the iTunes store. Yes, I know Subscribers can still get the episodes, and they show on my Podcast App, but for people searching for new Podcasts to listen to, they c
-
I got a CLOB filled from the file system with XML Content, which should be UTF8 but for some strange reasons the XML file generated is in WE8ISO8859P1. As I want to insert the XML File on an XML Table I have to convert the incoming clob data into UTF
-
Some problems regarding the lending of ebooks
We are dealing with the following issues when lending ebooks: 1.If a user changes the system clock, you can read a ebook that has already expired. 2. Some e-readers supported by ACS such as cool-er or hanlin do not keep the system date when they are