OCS 2007 to OCS 2007 R2

Hello world.
Doing a side by side migration from OCS 2007 to OCS 2007 R2 (due to our goofy SA agreement cannot upgrade to 2010 or Lync yet) and I am following the step by step guide here:
https://technet.microsoft.com/en-us/library/dd572505(office.13).aspx
My question is this...can I have two disparate SRV records referencing TLS...one pointed to legacy and then a new one pointed to the new server? What will happen with my clients?
This is an internal only deployment...no edge servers...no director...etc.
I have the domain prepped and when I launch setupse.exe I get all the way to the end and it rolls back because it cannot create the pool as it does not exist and there is no SRV TLS record to reference the pool.
We use OCS 2007 extensively throughout the org day and evening so I need to be able to get the new SRV records and pool inline without impacting production.
Can anyone shed some light on how I move forward? Been over the documentation and Google/Bing quite a bit and have yet to find a sufficient answer.
Thank you in advance MS community!

Hi crashIO,
No, the DNS SRV record can point only to a single pool, and in a mixed environment the supported configuration is to use Office Communications Server 2007, Director, with both Office Communications
Server 2007 and Office Communications Server 2007 R2 pools. This means that during migration, you should configure DNS records to point to the Office Communications Server 2007 Director or FE.
Before installing the OCS 2007 R2 pool, did you move your OCS Global Settings from the System Container to the Configuration Container in Active Directory.
“With Office Communications Server 2007 R2, the default container for Office Communications Server global settings is the Configuration container. In previous versions, the default container
was System container of the root domain.”
If you did not perform this step, please follow the article below to do this.
https://technet.microsoft.com/en-us/library/dd572392%28v=office.13%29.aspx
In addition, in order to co-existence with OCS 2007 R2, please ensure your OCS 2007 Servers are up-to-date.
Best regards,
Eric
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Similar Messages

Posting only possible in periods 2007/09 and 2007/08 in CoCd 1234.

Hello all,
I would appreciate some clarification on the following issue. We are getting a error message. It is a Goods movement error log message. This is how it appreas in the system:
MT.....Area.....Msg....Item.....Message text
E.........M7.......053.......10......Posting only possible in 2007/9 and 2007/7 in CoCd 1234.
Is this an FI or an MM error? I know we have to use OB52 in FI or MMPV in MM. But when I look in OB52, I see the following:
Var...From Acct......To Acct......From Per.1....Year......To Per....Year.....From Per 2......Year........To Per.......Year
+..................................................1.............2000........12.........2010..........13............2000.........16...........2010
A......................ZZZZZZ.....................1.............2000........12.........2010..........13............2000.........16...........2010
D......................ZZZZZZ.....................1.............2000........12.........2010..........13............2000.........16...........2010
K......................ZZZZZZ.....................1.............2000........12.........2010..........13............2000.........16...........2010
M......................ZZZZZZ......................1.............2000........12.........2010..........13............2000.........16...........2010
S......................ZZZZZZ......................1.............2000........12.........2010..........13............2000.........16...........2010
My posting periods are open right? So then is is fair to assume that the error is because MMPV on the MM side has not been maintained for Period 10?
Message was edited by:
United 99
Message was edited by:
United 99

Hi United 99,
You are not opened in the month of 09 so you need to open now.but you have small problem .onece any material created or any transaction will be processed you cant open direct to 07 month to 09 month you have to open one by one month it means first open 08 and next open 09 in MMPV this is the process you have to do
Hope this will helps you
Prem

Word 2007 and Outlook 2007 error 1605

Hi,
I keep getting this error with Word 2007 and Outlook 2007:
Microsoft Office word can't open thesaurus. Windows Installer error 1605.
Please advise on how to fix this.

Thank you. Thank you. Thank you. In all my searching for this problem, Yerger's was the only one that made much sense. And it worked! I no longer get an error when I open Outlook, and now I have my thesaurus back in Word!.
I suspect it will also fix the problem I was getting sometimes in Word that some kind of proofing tools were not available (although that was intermittent so I can't really tell for some time.)
Your solution was easy to follow and I like the explanation. I am usually suspicious of making changes to the registry based on an unknown person's suggestions. With this I could easily see that it was the relevant key.
For those not sure how to edit their registry: From the Start Menu, select Run, and type in regedit
Thanks!

Exporting to Powerpoint 2007 using the 2007 formats

I'm currently running Xcelsius 2208 and Office 2007. Because I was the first to get Office 2007 I've had to continue saving in the Office 97-2003 format (.ppt). Now that everyone has caugth up if I save in the .pptx or .pptm format the .swf appears to disappear after the file is saved and reopened. Does the .swf only run in the .ppt mode?

Hi Maureen,
You have to keep saving as PPT because PowerPoint does not support embedded Adobe Flash files in a PPTX (Office 2007).
Refer to the Export to Microsoft Word 2007 and PowerPoint 2007 in the General Issues section of the Xcelsius 2008 release notes.
Regards,
Matt

Upgrade from OCS 2007 to OCS 2007 R2 and Lync 2013

Hy friends!
Help me, please!
Scenario: Migration from OCS 2007 RTM to OCS 2007 R2
Target: Keep user contact list (I'm talking about only OCS contact list from internal organization users, I'm not refer about external addresses)
Question: I want to know if when I move a user from OCS 2007 RTM to OCS 2007 R2 the user contact list is also migrated?
If Yes, can you share the Microsoft documentation that describe it?
So, after I migrate the users to OCS 2007 R2, finally I can do a supported migration to Lync Server 2013.
Thanks in advance.

If you do a side-by-side migration the contact lists (and other user data) should remain intact. If you tear down OCS2007 and then install OCS2007R2, then you will need to use dbimpexp.exe to export the contact list from OCS2007.
Here is an overview: http://blogs.technet.com/b/ucedsg/archive/2009/02/07/how-do-i-get-from-ocs-rtm-r1-to-ocs-r2.aspx
Also take a look at the deployment guide: https://www.microsoft.com/en-us/download/details.aspx?id=19984 specifically
the section called "Updating from Office Communications Server 2007" which lists some potential issues.
If this helped you please click "Vote As Helpful" if it answered your question please click "Mark As Answer"
Georg Thomas | MVP (Skype for Business)
Blog skype4bexpert.com | Twitter
@georgathomas
Lync/Skype for Business Edge Port Check (Beta)
This forum post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

Do you know if it's possible to generate Word 2003 files from RoboHelp if we're using Office 2007 and RoboHelp 2007?

Do you know if it's possible to generate Word 2003 files from
RoboHelp if we're using Office 2007 and RoboHelp 2007? We are
thinking of upgrading, but have customers that would still require
Word 2003 formats because they won't have 2007 installed.
Thanks!

Hi NewtoRobohelp
Unfortunately I don't have Office 2007 in front of me to test
with. But I'm thinking that as long as Office 2007 still produces
the same formats as 2003, you could do it this way.
From RoboHelp 7 and using Office 2007, generate Printed
ouptut. Open said printed output in Office 2007 and perform a Save
As. Save the document as a RTF (Rich Text Format) document.
RTF is more universal. So I'm thinking this may be a possible
way around it. There is also the possibility that Word 2007 offers
up an ability when saving a file to save in an older format.
Cheers... Rick

OCS v Microsoft Exchange 2007

Does anyone have any collateral comparing OCS with Exchange 2007 ?....or know where I can find it.
Thanks
David

jarevalo wrote:
We do not use BES. Does your suggestion also apply to a BIS user, is this a setting on the Exchange server?
Wow, I'm a total moron and even though this is in a BIS topic I didn't realize it. Sorry. Have your Exchange admin look through the message tracking logs to see if the message is even making it to the server / your outbox.
If you've found a solution through a post; please mark it as a solution.
If someone's was particularly helpful, give them kudo's!.
Get busy living, or get busy dying.
http://blog.port3101.org/hdawg/

XLR b1 2007 and excel 2007    excel sheet is empty

hi experts,
i like to use xlr in b1 2007 with excel 2007.
after getting a fail in xl reporter, i change the security settings in excel 2007.
now the excel sheet opens, but there are no values in it.
for example, i made only a query about the business partner (the result is only one column) and like to
import the result in excel 2007 , there is only a headline named 'business partner' . And the column you could see in the xlr filled with the business partner names is empty.
sap b1 and excel 2007 runs on terminal services published by citrix.
has someone an idea to solve the problem?
with greetings from hamburg
   michael

Hi Michael,
Please make sure that the following steps are performed:
+COM Add-ins
(Excel 2007)
Go to excel
Office button -> Excel Options button
Add-Ins
Manager: COM Add-ins -> Go
SAP Business One XL Reporter should be selected.
+Disabled Items
(Excel 2007)
Go to excel
Office button -> Excel Options button
Add-Ins
Manager: Disabled Items -> Go
SAP Business One XL Reporter should not be listed.
If it is please select it and click Enable button.
+Macro Visual Basic Project
(Excel 2007)
Go to excel
Office button -> Excel Options button
Trust Center -> Trust Center Settings...
Macro Settings -> Trust access to the VBA project object model
hope it helps,
Regards,
Ladislav
SAP Business One Forum Team
Edited by: Ladislav Meszaros on Feb 25, 2009 10:41 AM
Edited by: Ladislav Meszaros on Feb 25, 2009 10:41 AM

Importing the database from ocs 9 to ocs 10.1.2

I am working on setting up oracle collaboration suite 10g at work, and we have a seperate version of oracle collaboration suite 9i running now. I was wondering if I could import the database tables from ocs 9i into ocs 10g. If that is possible would I then have all the mail, files and lists that have been created on the old ocs server in the new ocs server.. If it is not possible do I then have to manually create new post lists, move mail with imap2imap and what about the files that are stored now on the previous version of ocs?

Hi Andreas.
No, I did not post this question before, but I did post a question about transfering the migration tool that is refered to in the oracle collaboration manuals. Unfortunately, the tool refered too is not readily available and I ended up looking for it for more than two days.
I could not upgrade because we are switching hardware and the upgrade referred to in the installation manuals is an inplace upgrade, which is not a possiblity because of our decision to migrate to a better hardware platform. Thank you for taking time to answer my enquiry.

Windows 7 Pro/Outlook 2007/SharePoint Foundation 2007? .eml files open as attachment in outlook

Here is the issue.
I am running Windows 7 Pro with Office 2007.
I attempt to open an email from sharepoint. The email becomes an attachment to a new mail message from outlook 2007.
When I attempt to open the same email from command line, it opens correctly.
I have checked registry entries, and they all seem to point to the right places.
I have set Outlook as the default E-mail program, as well as assigned the .eml files as defaulting to outlook.
I have ran the microsoft fix, and manually implemented the fix after it didn't work, both to no avail.
I need a solution for this, I can't believe Microsoft would have such an issue with compatibility with their own programs.
If anyone has some insight, it is welcomed with open arms.
I am unsure which forum to place this topic, since it covers so many microsoft issues/programs, so if this is located in the wrong place, please move it for me.
I thank you all in advance for your assistance in this matter.

Hi,
According to your description, I suggest to ask Office Forum further help:
http://social.technet.microsoft.com/Forums/en-US/category/officeitpro
The reason why we recommend posting appropriately is you will get the most qualified pool of respondents, and
other partners who read the forums regularly can either share their knowledge or learn from your interaction with us. Thank you for your understanding.
Regards,
Leo
Huang
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Public Folder Migration from Exchange 2007 to Exchage 2007

Dear All,
We are having 2 exchange 2007 server in single copy cluster (SCR) with 1 branch exchange server in parent domain and another Ex2007 single copy cluster in child domain. We have deployed exchange 2013 SP1 in parent domain with ex2007 co-existence. We have
migrated all parent domain users mailbox from Ex2007 to Ex2013 SP1. All Ex2007 have public folders (FP). We want to decommission public folder server in parent domain and want to keep PF only in child domain (Ex2007) which should be accessible by all users.
We are facing a strange issue. As told earlier, in parent domain for ex2007 we have 2 Server in single copy cluster + 1 branch. Both have 1 FP each. We want to remove branch 1st. We ran "MoveAllReplica.ps1" script on branch to move all replica
to single copy cluster. Now it shows system folder with all 0 contents as shown below:
[PS] C:\Windows\system32>Get-PublicFolderStatistics -Server branch
Name                                     ItemCount
LastAccessTime
Default                                  0
7/4/2014 10:58:36 AM
exchangeV1                               0
7/4/2014 10:58:36 AM
microsoft                                0
7/4/2014 10:58:36 AM
schema-root                              0
7/4/2014 10:58:36 AM
StoreEvents{90712A34-233D-4E65-B2FF-23DE 0                 7/4/2014 10:58:36 AM
3C1F6820}
Nntp Control Folder                      0                 10/8/2010 3:22:12
AM
Now the issue is, if we dismount the FP store on branch server, all users are unable to access their FP. they get error saying exchange is down for maintenance. If we see connection status then we saw that its trying to connect branch FP server. In all client
setting we have removed branch server PF folder. What are we missing? Now our users who migrated to Ex2013 don't have any FP client setting also to look into. We tried reading lots of stuff but nothing seems to fix. Any advise is highly appreciated.
Feel free to revert for any clarity!!
Thanks in advance!!

Dear All,
We did little research and below are the results:
1. After moving Mailbox from SingleCopyCluster(SCC) DB to Ex2013, the user while connecting to PF connects to branch exchange PFs (where is his client setting points to SCC PF). He can access PF on SCC as well
2. If we discount branch PF DB, user gets error "Exchange server down for maintenance" while expanding PF. If we see connection status then it shows trying to connecting to Branch PF
3. If we move the mailbox back to old Ex2007 SCC, users connects to right PF (only SCC) and can work without issue even if we discount branch PF DB
As we have migrated MBX to Ex2013, there is no client setting to point migrated users to SCC PF.
Hope it help all of you to suggest what might fix this..
Thanks again..

Problem with Mail Merge in Word 2007 and Outlook 2007

Hi,
I just found out about the function to generate mail merged PDFs and send them via email. I tried that using Outlook 2007 as the email client, but it seems to me that Acrobat generates RTF emails instead of plain text. That causes many email clients, except Outlook, just to display a file called winmail.dat instead of the actual PDF file.
I already checked the settings in Outlook and made sure that new mails are started in plain text mode. If I do this manually the email becomes plain test. But not automatically with Acrobat.
Does anybody have a solution on that? I'm using Adobe Acrobat 9.1.
Best regards,
Johannes

Hi andré, I guess the issue is coming from the fact that you selected "AllPartiesInvolved" and that may contain any numbers of entries. So when you test your webservice, you put a key and then get a result for that key, and in that case you might get "element1" until "element3" for example if there was 3 partners involved in you activity.
But, when you design your template, you don't have a key at that moment, so in the Web Service structure, you have "items" which stands for all the possible entries you might retrieve at runtime. I guess you could use an index in your template to specify which item you need, but this is quite hasardeous, so i would be you, I would not design my web service to use "AllPartiesInvolved" but rather a specific Partner type like contact person for instance.
Regards,
Xavier

Exchange 2013 - 2007 coexistence - activesync 2007 does not work correctly

Exchange 2013 SP1. On going Saga- Last night we cut over to full co-existence with DNS changes for use of legacy namespace and had to roll back again. We had only two issues but one was considered a show stopper.
The main issue was that Active Sync would not work correctly for 2007 users. It failed the exchange connectivity test and would only work on a device if the domain was entered - or if the legacy namespace was entered manually. That would have meant
chaos for several thousand users so we rolled back. (It worked perfectly for 2013 users).
The error given by the test was "foldersync failed" when I drilled down into the detail. It found autodiscover but failed after the initial handshake. (All other tests passed for 2007 and 2013 users)
We tried:
1. Populating both Autodisover internal and external urls with the legacy namespace
2. Populating only the internal url and leaving the external blank (both 1 and 2 had the same result)
3. Leaving both URLs blank to force 2013 to proxy to the 2007 cas (totally broke it- would not resolve at all)
I don't know if this is related but SSO is failing for 2007 OWA - two prompts.
Environment notes- all internal co-existence is working and the internal LTM F5's are working. Externally we use 2 GTM F5 to the LTM f5's to Ex2013. 2007 has SSL being passed through all the way to the CAS. Servers are split into CAS and MBX over 2 DC's.
Everything else externally was working when we cut over.
any and all help appreciated
Tony

Hi,
Glad to know that you have found the solution.
Thanks for your generous sharing.
Have a nice day : )
Thanks
Mavis
Mavis Huang
TechNet Community Support

[SOLVED] wine Visio 2007 or Project 2007 not working on ARCH 64 bits

Hi, i'm having problems installing Visio 2007 or any other microsoft app.
My system;
$ uname -r
2.6.39-ARCH
$ pacman -Qs wine
local/wine 1.3.23-1
A compatibility layer for running Windows programs
local/wine_gecko 1.2.0-1
Wine's built-in replacement for Microsoft's Internet Explorer
local/winetricks 20110629-1
Script to install various redistributable runtime libraries in Wine.
That's what i've done.
$ pacman -S wine wine_gecko winetricks lib32-libpng --> OK
$ WINEARCH=win32 winecfg --> OK
wine: created the configuration directory '/home/user/.wine'
err:module:load_builtin_dll failed to load .so lib for builtin L"winemp3.acm": libmpg123.so.0: cannot open shared object file: No such file or directory
err:module:load_builtin_dll failed to load .so lib for builtin L"winemp3.acm": libmpg123.so.0: cannot open shared object file: No such file or directory
fixme:storage:create_storagefile Storage share mode not implemented.
err:mscoree:LoadLibraryShim error reading registry key for installroot
err:mscoree:LoadLibraryShim error reading registry key for installroot
err:mscoree:LoadLibraryShim error reading registry key for installroot
err:mscoree:LoadLibraryShim error reading registry key for installroot
err:mscoree:LoadLibraryShim error reading registry key for installroot
err:mscoree:LoadLibraryShim error reading registry key for installroot
fixme:iphlpapi:NotifyAddrChange (Handle 0x8fee91c, overlapped 0x8fee900): stub
err:module:load_builtin_dll failed to load .so lib for builtin L"msxml3.dll": libxml2.so.2: cannot open shared object file: No such file or directory
wine: configuration in '/home/user/.wine' has been updated.
$ winetricks msxml3 --> OK
$ winetricks corefonts --> OK
$ winetricks riched20 --> OK
$ winetricks gdiplus --> OK
$ wine Downloads/Microsoft/Visio2007/setup.exe
err:ntlm:SECUR32_initNTLMSP ntlm_auth was not found or is outdated. Make sure that ntlm_auth >= 3.0.25 is in your path.
err:ntlm:SECUR32_initNTLMSP Usually, you can find it in the winbind package of your distribution.
fixme:system:SetProcessDPIAware stub!
fixme:htmlhelp:HtmlHelpW HH case HH_INITIALIZE not handled.
err:ole:CoGetClassObject class {f5078f32-c551-11d3-89b9-0000f81fe221} not registered
err:ole:CoGetClassObject no class object {f5078f32-c551-11d3-89b9-0000f81fe221} could be created for context 0x1
fixme:htmlhelp:HtmlHelpW HH case HH_UNINITIALIZE not handled.
fixme:process:GetLogicalProcessorInformation ((nil),0x33f038): stub
fixme:netapi32:NetGetJoinInformation Semi-stub (null) 0x33f034 0x33f028
$ err:ntlm:SECUR32_initNTLMSP ntlm_auth was not found or is outdated. Make sure that ntlm_auth >= 3.0.25 is in your path.
err:ntlm:SECUR32_initNTLMSP Usually, you can find it in the winbind package of your distribution.
fixme:heap:HeapSetInformation 0x110000 1 (nil) 0
fixme:imm:ImmDisableIME (-1): stub
fixme:advapi:RegisterEventSourceW ((null),L"Microsoft Office 12"): stub
fixme:advapi:ReportEventW (0xcafe4242,0x0001,0x0000,0x00001388,(nil),0x000b,0x00000104,0x300bcf54,0x68ca3c): stub
err:eventlog:ReportEventW L"office12setup"
err:eventlog:ReportEventW L"{10120000-0f00-0000-0000--0000000ff1ce}"
err:eventlog:ReportEventW L"12.0.4518.1014"
err:eventlog:ReportEventW L"x"
err:eventlog:ReportEventW L"0x80040154"
err:eventlog:ReportEventW L"visio.en-us_setup.xml"
err:eventlog:ReportEventW L"x"
err:eventlog:ReportEventW L"x"
err:eventlog:ReportEventW L"NIL"
err:eventlog:ReportEventW L"NIL"
err:eventlog:ReportEventW L"NIL"
fixme:advapi:DeregisterEventSource (0xcafe4242) stub
fixme:process:GetLogicalProcessorInformation ((nil),0x33fc20): stub
fixme:netapi32:NetGetJoinInformation Semi-stub (null) 0x33fc1c 0x33fc10
I'll appreciate any help on this.
Last edited by jorel1981 (2011-07-03 16:16:24)

Ok, installed riched30 but still not working...
$ wine Downloads/Microsoft/Visio2007/setup.exeerr:ntlm:SECUR32_initNTLMSP ntlm_auth was not found or is outdated. Make sure that ntlm_auth >= 3.0.25 is in your path.
err:ntlm:SECUR32_initNTLMSP Usually, you can find it in the winbind package of your distribution.
fixme:system:SetProcessDPIAware stub!
fixme:htmlhelp:HtmlHelpW HH case HH_INITIALIZE not handled.
fixme:richedit:REExtendedRegisterClass semi stub
fixme:richedit:ME_HandleMessage EM_SETEDITSTYLE: stub
fixme:richedit:ME_HandleMessage EM_SETBIDIOPTIONS: stub
fixme:richedit:ME_HandleMessage EM_SETEDITSTYLE: stub
fixme:richedit:ME_HandleMessage EM_SETBIDIOPTIONS: stub
fixme:richedit:ME_HandleMessage EM_SETEDITSTYLE: stub
fixme:richedit:ME_HandleMessage EM_SETBIDIOPTIONS: stub
fixme:richedit:ME_HandleMessage EM_SETEDITSTYLE: stub
fixme:richedit:ME_HandleMessage EM_SETBIDIOPTIONS: stub
err:ole:CoGetClassObject class {f5078f32-c551-11d3-89b9-0000f81fe221} not registered
err:ole:CoGetClassObject no class object {f5078f32-c551-11d3-89b9-0000f81fe221} could be created for context 0x1
fixme:htmlhelp:HtmlHelpW HH case HH_UNINITIALIZE not handled.
fixme:process:GetLogicalProcessorInformation ((nil),0x33f038): stub
fixme:netapi32:NetGetJoinInformation Semi-stub (null) 0x33f034 0x33f028
$ err:ntlm:SECUR32_initNTLMSP ntlm_auth was not found or is outdated. Make sure that ntlm_auth >= 3.0.25 is in your path.
err:ntlm:SECUR32_initNTLMSP Usually, you can find it in the winbind package of your distribution.
fixme:heap:HeapSetInformation 0x110000 1 (nil) 0
fixme:imm:ImmDisableIME (-1): stub
fixme:advapi:RegisterEventSourceW ((null),L"Microsoft Office 12"): stub
fixme:advapi:ReportEventW (0xcafe4242,0x0001,0x0000,0x00001388,(nil),0x000b,0x00000104,0x300bcf54,0x79ca3c): stub
err:eventlog:ReportEventW L"office12setup"
err:eventlog:ReportEventW L"{10120000-0f00-0000-0000--0000000ff1ce}"
err:eventlog:ReportEventW L"12.0.4518.1014"
err:eventlog:ReportEventW L"x"
err:eventlog:ReportEventW L"0x80040154"
err:eventlog:ReportEventW L"visio.en-us_setup.xml"
err:eventlog:ReportEventW L"x"
err:eventlog:ReportEventW L"x"
err:eventlog:ReportEventW L"NIL"
err:eventlog:ReportEventW L"NIL"
err:eventlog:ReportEventW L"NIL"
fixme:advapi:DeregisterEventSource (0xcafe4242) stub
err:ole:CoInitializeEx Attempt to change threading model of this apartment from multi-threaded to apartment threaded
err:ole:CoInitializeEx Attempt to change threading model of this apartment from multi-threaded to apartment threaded
fixme:richedit:ME_HandleMessage EM_SETMARGINS: stub
fixme:richedit:ME_HandleMessage EM_SETMARGINS: stub
err:ole:CoUninitialize Mismatched CoUninitialize
err:ole:CoUninitialize Mismatched CoUninitialize
fixme:process:GetLogicalProcessorInformation ((nil),0x33fc20): stub
fixme:netapi32:NetGetJoinInformation Semi-stub (null) 0x33fc1c 0x33fc10
Last edited by jorel1981 (2011-07-02 00:34:32)

Currupted "sent items" folder in Outlook 2007 (on Exchange 2007) causing Outlook to crash.

One user here has a problem when clicking on the "sent items" folder. Outlook hangs for 5 secondes and then crashes. If user logs into OWA, she can
access the "sent items" folder no problem. I thought it was a messege in the folder that was corrupted so I asked the user to move the messages to a temp folder from OWA. She did that, the folder is now empty but Outlook still crashes. Tried cache
mode and uncache.
I tried to delete her sent item folder using MFCMAPI (in the hope the it will recreate a new folder) : right click the folder, selected delete folder, check the
option "hard deletion" and I get
Warning:
Code: MAPI_W_PARTIAL_COMPLETION == 0x00040680
Function lpParentFolder->DeleteFolder(
lpItemEID->cb, (LPENTRYID) lpItemEID->lpb, lpProgress ? (ULONG_PTR)m_hWnd : NULL, lpProgress, ulFlags)
File .\MsgStoreDlg.cpp
Line 991
One more test I did: I copied the sent items folder to a pst, moved the pst to my computer and when I try to open the folder from the PST, my Outlook would freeze
and crash. Isn't interesting?
Am I missing something here? Has someone encounter this problem before? Any other idea on how it could be resolved?
This issue started on Exchange 2003. We are now moving to Exchange 2007. I moved her mailbox to the new server in the hope that any mailbox problem will be filtered
and removed. I still have the issue..
env:
Exchange 2007 running on Win2008
PC:
Windows Vista sp1, outlook 2007 (user was getting same issue under Win2k with Outlook 2003)

Couple steps you may apply...
1. Repair the offline file with a Microsoft utility called SCANOST.exe. I’ve seen this file reside in a number of different locations, mainly within Program
Files. It might be best to search for it with Windows or Google Desktop. SCANPST.exe will also work, though you’ll have to go digging for your outlook.ost, which should be near c:\Documents and Settings\ %profile%\ Local Settings\ Application Data\ Microsoft\
Outlook\ outlook.ost. If your file is significant in size, you’ll save a lot of time with the repair operation by not creating a backup. Because if the repair finishes successfully and Outlook still bombs, you’ll need to.
2. Shutdown Outlook completely, including any runaway outlook.exe processes in the task manager. Open Mail in the Control Panel and before you delete your
profile completely, write down the server settings! There’s no need to worry about backing up your mail as it’s stored on the Exchange server. (Essentially, you’re deleting that outlook.ost when you drop your mail profile.) Now, start Outlook and it will create
a new profile, where you’ll configure the server with the information you wrote down previously.
If steps above doesn’t work or you need to get more variants of .pst restoration, visit...
http://www.filerepairforum.com/forum/microsoft/microsoft-aa/outlook/1503-is-there-any-opportunity-to-recover-huge-pst-file-over-6gb
- multi functional user community where you may discuss methods and cases of .pst corruption
https://www.repairtoolbox.com/how-to-repair-outlook.html
Outlook Repair Toolbox - one of the accessible tools on the market, as a variant in case you can’t recover .pst file via ScanPST or manually solutions

OCS 2007 to OCS 2007 R2

Similar Messages

Maybe you are looking for