OCS + Oracle Application Server sharring same db and infra

Hi all,
I would like to install Oracle Collaboration Suite in the same machine where runs my Oracla Application server.
The mais ideia is to share the same infrastructure and database from AS to Oracle Collaboration Suite.
Can I do it ?
I'm asking 'cause when I'm trying install collaboration suite to use a existing database as an OCS' repository Oracle Installer gives me a message like this:
"Oracle Home you have specified is not a Oracle10g 10.1.0.4.2 version and cannot be configured into an Oracle Collaboration Suite Database"

Hello,
You shoul read the manual of OCS, but in my opinion you should not share the same database, due management issues.
If you need to do some administration in the OCS with implies a database restart, your application server will be unavaiable as well.
So the best thing is to have diferent DB's to application server and to OCS, and with the right hardware you can have the 2 instances in the same server. You just need to set up the oracle listeners to diferent TCP/IP ports.
Best regards,
Bruno Sousa

Similar Messages

  • Oracle Application Server 10.1.3  and IIS

    I have Oracle Application Server 10.1.3 Sucessfully on my pc. I can access the IAS welcome page using URL http://computername
    and I can access the Enterprise Manager login using http://computername/em.
    This is running on Windows XP Pro Service Pack2. I have not installed the IIS(though this is available with XP Professional).
    If I install IIS (from add windows components control panel-> add/remove software) , will this cause any Issue with Oracle Application server?. When I installed the IIS , which URL I use to access the IIS Welcome page?
    Please help
    George

    Hi George,
    Without knowing too much about IIS I don't think you should run into that much problems. Running two application servers in parallel is usually not a problem as long as you make sure that they are not trying to listen on the same port.
    It seems that you got your OracleAS listening on port 80, so make sure to configure IIS for another port when you have installed it.
    Regards,
    Mathias

  • Install Oracle Application Server on same as database server

    How to Install Oracle Application Server.
    Can I install on the same server as database server
    Can some body provide a simple tutorial for Windows Installation.
    Ss

    If there is no licensing issues - then I could advice SOA Suite installation - there should be AS as well and many other features (BPEL e.g.). Personally I cann't see any need for installation manual as all the installation and configuration assistance poceeds automatically. Documentation can be found http://www.oracle.com/technology/documentation/appserver.html - usually zip contains large library of pdf, installation manual including.
    Well - my problem is that I have installed partially SOA Suite (configuration assistants failed at web services) on machine without DB server, then I installed DB server and now I am trying to deinstall SOA Suite - but now for some days machine shows 100% CPU consumption and no any visible actions (no new errors as well)... What should I do? Kill the process and try to manually remove SOA? I plan after make another SOA installation after removal of this one.
    Thanks in someone can help me!

  • Oracle Application Server 10g Release 1 and JDeveloper 10.1.3.2.0

    Hi,
    One my client have Oracle Application Server 10g Release 1.
    Can I do development in JDeveloper 10.1.3.2.0 using ADF and then deploy it on OAS 10g R1.
    If can what I should look for so that it can be as smooth as possible.
    Regards,
    Raj
    www.oraclebrains.com

    hi
    Maybe this can help
    "Application Servers Supported by JDeveloper"
    http://www.oracle.com/technology/products/jdev/collateral/papers/10g/as_supportmatrix.html
    success
    Jan Vervecken

  • Oracle Application Server 10g Rel 3 and forms Application Deployment

    Dear All,
    I am in process of installing Oracle AS 10g rel 3. and I have an application (ERP) devloped in Oracle 10g IDS (Devloper Suite). So when I read the installation Doc for Oracle 10g rel3 installation I didn't get any information regarding the forms-reports component.
    So can somone please tell me how I can deploy my IDS based application in Oracle 10g Rel 3 Application Server. Or if there is any other process to deploy the application in application Server.
    Oracle AS 10g Rel3 DVD containing the following folder------ bpel, companioncd, esb, owsm, soa
    Thanks in Advance.
    Pradeep Sharma

    Hi Pradeep,
    Forms cannot be deployed in 10gR3. you need to have 10gR2.
    thanks,
    --Ranga                                                                                                                                                                                           

  • Oracle Application Server Standard Edition One  and Forms Service.

    I received the OTN tech blast EMAIL of 6th Jun. encouraging download of application server10g standard edition.
    This says that it is
    .... a complete environment to Web-enable existing applications.
    Can I web enable my existing forms modules.
    Because when I browse to the page I didnt find anything that says about forms service.
    With Regards.
    Soumen

    http://docs.oracle.com/cd/B14099_19/index.htm
    how to run forms on client computerhttp://docs.oracle.com/cd/B14099_19/web.1012/b14032/basics001.htm#i1021049

  • How to Install oracle workflow and why we need Oracle Application Server

    I want to install and configure Oracle Workflow using Oracle 10g
    Please help me and guide me with the process in deatial from scratch what should i need to install
    Oracle Database
    Oracle Application server middle tier
    Oracle Content Management SDK
    Also help me how can i configuer oracle internet directory because when installing Oracle application server it requires HostName and Port No.
    I am a student
    I know just how to install oracle database 10g
    and New to oracle Application Server
    Waqar Habib

    The files at
    http://otn.oracle.com/software/products/ias/workflow/htdocs/winsoft.html
    are for Oracle Workflow version 2.6.0. Here is some information from the announcement for downloading the latest version, 2.6.3:
    Oracle Workflow 2.6.3 for Oracle Database 10g is now available for download from OTN.
    Please point your browsers to http://otn.oracle.com/software/index.html
    Currently, the availability is limited to Windows and we are working towards availability on other platforms. I will post another message as soon as it becomes available.
    The Workflow Server requires an Oracle 10g database home and the Workflow mid-tier requires an Oracle HTTP Server home - Apache Install from the Oracle 10g Companion CD. For more information please read the installation notes.

  • Problem in oracle application server 10g

    hi all
    i have problem with application server 10g
    my situation :
    oracle database 10g release 2
    oracle application server 10g ( forms,reports)
    and i installed the database and application server on the same computer , and with windows xp service pack 2 os
    my problem is when i start the computer that connected to a network some services of application server not working , note that no problems with the database
    and i installed node 32 antivirus
    can any one help me plz ?

    Wich processes don't start? do you have this services in Automatic?
    Can you try to pass the to manual, and start the procs suing opmnctl command and check the logs of it?
    Regards

  • Oracle application server control white screen problem

    Hi,
    I have installed Oracle Application server 10g. Both the infra and mid tier are running from the
    same machine.
    I am able to login to application server control from http://riysvdwh-004:7777, but
    unable to login to the application server control from http://riysvdwh-004:7778,
    i can login to portal and discoverer from the second link, but when i click on"log on to
    Oracle Enterprise Manager 10g Application Server Control:" i get a white page and 5-6
    pipe symbols moving at the top left of the screen and i dont get the next screen.
    I have checked the setupinfo.txt file in midtierhome/install location and found out that
    the hostname in the database connection string is different, instead of hostname riysvdwh-004
    , it is riysverp-004,
    Use only SSL connections with this Oracle Internet Directory:No
    Database Connection String: riysvdwh-004:1521:ASDBDEV.riysverp-004:ASDBDEV.riysverp-004
    Use the following URL to access the Oracle HTTP Server and the Welcome Page:
    http://riysvdwh-004:7778
    i think this could be a reason why i am unable to login from port 7778.
    Is there a way to make this work.
    would appreciate some suggestions.
    regards,

    1) Look in the $ORACLE_HOME/install directory ... ports used for the various functions such as EM are usually listed in the portlist.ini file in each Oracle Home
    2) Ask in the App Server forum. There is an assumption that questions in the Database forum are primarily focussed on Database issues. <g>

  • OCS (CMSDK) and Oracle Application Server 10.1.3

    Hi,
    Is CMSDK or OCS (Oracle Content Services) part of Oracle Application Server 10g 10.1.3?
    Regards,
    Jigar

    Its recommended that you should use same versions of OAS and Oracle BAM.
    For integration between OAS components and BAM you can check BAM tech notes (http://www.oracle.com/technology/products/integration/bam/10.1.3/htdocs/1013_support.html#technotes)
    Hoping it will help you.

  • Install Oracle Application server 10g and Oracle database 10g on same box

    Hi Experts!
    i need to install Oracle database and oracle application server on the same machine(windows xp).
    when i install both of them and reboot the machine either oracle database or oracle application server fails...
    i suspect that the problem might be due to two - ORACLE_HOME
    let me know how i can resolve this issue.
    Note: Oracle DB and OAS OPMN process run as a windows service.
    after restart opmn fails
    Many thanks in advance
    -Raghav

    Jacco, in spite of your ace :-) this time I cannot
    completely agree with you:
    I hope sincerely that this ace thing doesn't "scare" anyone from challengeing me. I can't know everything, even though this ace sign suggests it.
    - things like ORACLE_HOME are also set in the system
    environment settings. This may lead to conflicts;It does, therefore you should set them with the service (I figured the installer of Oracle would actually do that for you, but I hardly ever work with Windows)
    - the database and AS have different versions of the
    RSFs. The most recent AS version is using 10.1.0.5
    RSFs, where the database uses 10.2.x. This leads to
    conflicts.
    - Port conflicts are common in the ONS area, however
    this should not prevent startup and should not be
    very likely at this point since all products use the
    same inventory and it should have been checked for
    ports that are in use.ons port conflics shouldn't precent startup, but other port conflicts can.
    >
    With the total of our posts the problem should be
    resolved anyway ;)Exactly, as long as the reader has the proper knowledge to understand them ;)
    (this feels like a post just to make sure that you know I respect your opinions and advices)

  • Run Oracle Web Logic and Oracle Application Server 10g on same server

    Since oracle has chosen to release adf faces 11g, before the SOA suite 11g is released, we are facing the challenge to run both Oracle Web logic and Oracle Application Server 10g on the same server.
    If anyone have any experience in this setup or has knowledge of other feasable setups please let me know.
    Regards.
    Jan

    What version of Oracle Application Server 10g are you installing?
    If you are installing 10gR2 (v10.1.2.x) have you taken a look at point #70 in "Table 2 Additional Information for Certified Platforms" section here?
    http://www.oracle.com/technology/software/products/ias/files/as_certification_r2_101202.html
    Thanks
    Shail

  • Oracle application server 10g and apex

    Hi allm
    Can someone show me a guide on how to use Oracle Application Server 10g with APEX. I'm currently using Oracle HTTP Server but decided to use OAS instead so that I can use the Report Server and the Oracle BI Publisher for the reports.
    I'm currently using this guide (http://www.oracle.com/technology/products/database/application_express/howtos/howto_useoas10g.html) but I can't seem to find the marvel.conf and the oracle_apache.conf.
    Also, is it really necessary to use OAS instead of Oracle HTTP Server if I want to use Oracle BI Publisher?
    Thanks.
    Allen
    Edited by: A.Sandiego on Sep 3, 2008 12:01 AM

    Hi,
    Thanks for the response.
    Unfortunately I still get the same problem. Somehow I just can't find the marvel.conf anywhere in my machine. I setup my APEX not by using the companion cd but by downloading the apex_3.1.2 then running the apexins.sql. Then install the Oracle HTTP Server only and configured the dads.conf located in the ORACLE_HTTP_SERVER_HOME/Apache/Apache/mod_plsql/conf. It works perfectly with this.
    I then installed Oracle Application Server 10g. I'm trying to figure out how to use this instead of the Oracle HTTP Server.
    Thanks.
    Allen

  • BAM and Oracle application server 10.1.3???

    Hi,
    I would like to understand more about integration between BAM and OAS.
    I remember I read a document that stated that BAM was included (or was integrated) as part of OAS 10.1.3, however I installed it and still don;t see how it is integrating with OAS.
    Also, in one of the Tutorials it mentions this:
    "Note –if you are using Oracle Application Server with opmn process, the following
    additional files are required in the above path:
    C:\OracleBAM\OC4J\opmn\lib\optic.jar
    Copy the entire Application Server “opmn” directory to c:\oraclebam"
    So... are there any additional steps for the OAS and BAM integration?
    I am still learning BAM but mi goal is install it as part of EBS(order Manegemnet)-BPEL-OTM (oracle Transportation) integration installation I currently have.
    If it can be integrated can it be done using iAS 10.1.2.0.2 instead?
    Thanks

    Its recommended that you should use same versions of OAS and Oracle BAM.
    For integration between OAS components and BAM you can check BAM tech notes (http://www.oracle.com/technology/products/integration/bam/10.1.3/htdocs/1013_support.html#technotes)
    Hoping it will help you.

  • Install developer10g  and oracle application server 10g on oracle linux R6

    i want install oracle application server 10g on oracle linux R6
    in same server oracle database 10 g installed
    the database 10g installed and work fine.
    i try install oracle developer 10g installed .succ
    but the frmbld.sh didnt work
    ./frmbld.sh :line 105 :/u01/u03/app/oracle/product/10.2.0/db_1/bin/frmbld:cannot execute binary file?
    have two user oracle for database ,oradev for developer

    thx
    can give me any link
    any one can help me on application server 10 in oracle linux R6?

Maybe you are looking for