OCS package SAPKITL437 does not match the current software component vector
I am trying to apply SAPKB70108 in SOLMAN 7.1 ehp1. SPAM=KD70143, got error OCS package SAPKITL437 does not match the current software component vector
Lalit Kumar
I have posted single time but due to internet problem, I clicked two times and the same posted twice.. I want to delete one but haven't find delete option...
Lalit Kumar
Similar Messages
-
Dear Gurus,
When i try to install ST-A/PI Addon from SPAM and select queue : OCS package SAPKITAB9L does not match the current software component vector
My downloads ;
1 - SAPKITAB9J ==> CSN0120061532_0073055.PAT (ST-A/PI , 01Q_731 , Package Level=0000) downloaded from
ST-A/PI 01Q_731 (INSTALLATIONS AND UPGRADES)
2 - SAPKITAB9K==> CSR0120031469_0081131.PAT (ST-A/PI , 01Q_731 , Package Level=0001) downloaded from
ST-A/PI 01Q_731 (SUPPORT PACKAGES AND PATCHES)
3 - SAPKITAB9L==> CSR0120031469_0076956.PAT (ST-A/PI , 01Q_731 , Package Level=0002)
ST-A/PI 01Q_731 (SUPPORT PACKAGES AND PATCHES)
I placed them under EPS and uploaded succesfully when i "Load Packages" from " "from Application Server"
What could be problem ?
Here is system components ;
SAP_BASIS
740
0005
SAPKB74005
SAP Basis Component
SAP_ABA
740
0005
SAPKA74005
Cross-Application Component
SAP_GWFND
740
0005
SAPK-74005INSAPGWFND
SAP Gateway Foundation 7.40
SAP_UI
740
0006
SAPK-74006INSAPUI
User Interface Technology 7.40
PI_BASIS
740
0005
SAPK-74005INPIBASIS
Basis Plug-In
ST-PI
2008_1_710
0007
SAPKITLRE7
SAP Solution Tools Plug-In
BI_CONT
757
0001
SAPK-75701INBICONT
Business Intelligence Content
BI_CONT_XT
757
0001
SAPK-75701INBICONTXT
Business Intelligence Content for Bobj I
SAP_BW
740
0005
SAPKW74005
SAP Business Warehouse
CPMBPC
801
0005
SAPK-80105INCPMBPC
CPM Business Planning and Consolidation
POASBC
100_731
0005
SAPK-10205INPOASBC
POA Shared Business Componentsin 000 client but now i am getting DUMP ;
Category ABAP Programming Error
Runtime Errors CALLBACK_REJECTED_BY_WHITELIST
ABAP Program SAPLSTPA
Application Component BC-CTS
What happened?
An RFC callback has been prevented due to no corresponding whitelist
entry being configured. The original RFC called function module "RFC_TP" in
the target system with destination "CALLTP_WindowsNT". The callback called
function
module "TRINT_PROGRESS_INDICATOR" in its own system.
Error analysis
Function module "RFC_TP" was called. This execute an RFC callback via ABAP
statement CALL FUNCTION 'TRINT_PROGRESS_INDICATOR' DESTINATION 'BACK'
. This action resulted in this ABAP short dump.
This action was triggered explicitly by the application in transaction
"SAINT " and in ABAP main program "SAPLSAINT_UI". -
OCS package SAPKITAC4E does not match the current software component vector
Hello Experts,
I am running EHP4 upgrade on ECC system, I have downloaded files from MOPZ, I got an error message in PREP_EXTENSION/SUBMOD_EXTENSION_NEW/EHP_INCLUSION, error is as follows,
Last error code set: Unable to generate addon queue. Return Code = 1, Reason = "OCS package SAPKITAC4E does not match the current software component vector", check log file 'SPDA_EHP_INCLUSION.LOG' for details
As per the log 'SPDA_EHP_INCLUSION.LOG' it is looking for BBP CRM patches, error message is as follows,
3 ETN490 Use the Add-On installation package "SAPKITAC4E" (type &4"AOI") for Add-On &2"ST-A/PI" rel.&3"01M_CRM570"
3 ETN245 The following import prerequisites of OCS Package "SAPKITAC4E" have not been met:
3 ETN264 In the (alternatively) Requirement set "01":
3WETN491 Required software component "BBPCRM" rel."500" is not installed
3 ETN264 In the (alternatively) Requirement set "02":
3WETN491 Required software component "BBPCRM" rel."510" is not installed
3 ETN264 In the (alternatively) Requirement set "03":
3WETN491 Required software component "BBPCRM" rel."520" is not installed
3 ETN264 In the (alternatively) Requirement set "04":
3WETN491 Required software component "BBPCRM" rel."600" is not installed
3 ETN264 In the (alternatively) Requirement set "05":
3WETN491 Required software component "BBPCRM" rel."700" is not installed
3 ETN264 In the (alternatively) Requirement set "06":
3WETN491 Required software component "BBPCRM" rel."701" is not installed
2WETN543 OCS package "SAPKITAC4E" does not match the current software component vector
1 ETN214X."**************************************************"
1 ETN251 End of phase: "'Add-on Queue Calculation'"
1 ETN254 End date: "02.08.2011"
1 ETN255 End time: "23:30:08"
1 ETN214 ."**************************************************"
BBP CRM is not installed in our ECC system, I am not sure why it is required.
Can you please advise me how to move forward without installing BBPCRM.
Regards,
FazilIf someone one found the following errors during SAP ECC6-EHP6 implementation with Software Update Manager:
1:
Error message set: 'Unable to generate addon queue. Return Code = 1, Reason = "Extended attribute STACK_XML_REQUIRED for SAPK-100AHINUI2FND is unknown"
Solution:
Please update the SPAM/SAINT version with latest available at OSS site, then restart the implementation with INIT option.
2:
Error message set: 'RFC error system DEV nr 00 function 'SPDA_READ_NEW_PACKAGES' failed with code 3 key CALL_FUNCTION_NOT_FOUND: Function module "OCS_CHECK_PATH_CONSISTENCY" not found.
Restart the Software Update Manager and SAP instance. If possible then update SAP Kernel with latest available patch, R3trans and tp as well.
Regards. -
Upgrade to EHP4: OCS package SAPKE60002 does not match the current software
Hi!
I would like upgrade my SAP ERP 6.0 system to EhP4.
During the phase PRE_EXTENSION/EHP_INCLUSION I get the following error:
ERROR: Unable to generate package queue.
Return Code = 3, Reason = "OCS package SAPKE60002 does not match the current software component vector"
Check log file 'SPDA_EHP_INCLUSION.LOG' for details.
I looked into the defined stack queue by the EHP Installer tool and detected that this SAP HR component should have the version 38. Currenty the SAP HR has the version 01.
Can some one help to solve this problem?
Thank you very much
regards
Jürgenhii
Note 822379 might help you
have a look
Rohit -
OCS package does not match the current software component vector
Hello TECHIES,
Please help me with following error it is very emergency
We had developed an ADD-ON in CRM7.0 and when we try to Install in it into CRM EHP1 server
we get the following error:
OCS package does not match the current software component vector""emergency" errors should be handled through OSS/CSN, not here on the forum.
The error message means that the source system has a different support package level than the target system.
Markus -
OCS package SAPK-603DHINISUT does not match the current software component
I'm getting an error in my installation of EHPI4 using the SAPehi tool in the PREP_EXTENSION/EHP_INCLUSION stage that says: OCS package SAPK-603DHINISUT does not match the current software component.
The SPDA_EHP_INCLUSION.log says " Calculate pure CRT Queue" "for installed Add-ons" "and already applied Support Packages" " "
3 ETN112 The OCS Package Queue is empty
2 ETN085X"2. Adding Add-on Installation Queue" " " " " " "
3 ETN245 The following import prerequisites of OCS Package "SAPK-603DHINISUT" have not been met:
3 ETN264 In the (alternatively) Requirement set "01":
3WETN493 Not allowed software component "ECC-SE" rel."600" is installed
3 ETN264 In the (alternatively) Requirement set "02":
3WETN493 Not allowed software component "ECC-SE" rel."600" is installed
3WETN492 Required Add-On component "IS-UT" rel."602" is not installed
3 ETN264 In the (alternatively) Requirement set "03":
3WETN493 Not allowed software component "ECC-SE" rel."600" is installed
3WETN493 Not allowed software component "ECC-VPACK" rel."*" is installed
2WETN543 OCS package "SAPK-603DHINISUT" does not match the current software component vector"
I have added the package IS-UT 602 along with all the support packs that go with the IS-UT 602 component but I am still recieving this error. Would anyone have an idea on how to correct this? Any help would be greatly appreciated. Thank you!I ended up solving the issue with note #1150349. I had to go into transaction SEPS -> INBOX there where several versions of the ACP
IS-UT=====603:
Origin Number Ext. Subject Delivery date/time
CSR0120031469 0032968 PAT IS-UT=====603 07.10.2009 15:30:27
CSR0120031469 0032633 PAT IS-UT=====603 14.10.2009 21:19:46
delete them all out in SEPS and in the EPS\IN folder. Load teh ACP files from the note which corrected the issue. Thank you again for your help! -
OCS package SAPK-60501INEAPS does not match the current software component
Hi Friends.
I installed NetWeaver 7.02 with ECC 605. When I try to update EA-PS component (SAPKGPPD16) with SPAM (7.02/0043) to SAPK-60501INEAPS, I got the following errors:
- OCS package SAPK-60501INEAPS does not match the current software component vector
- EA-PS,605 Non-permitted release of add-on EA-PS installedI downloaded K-605DHINEAPS.SAR from marketplace.
In the note 1456663 there is a workaround for SEM_BW and FINBASIS components.
"Load ACP (attribute change package).
Before starting the installation of SEM_BW or FINBASIS load the attached file "ACP_EHP5_on_NW702.SAR" into your system (Transaction SPAM -> Support Package -> Load Packages -> from Frontend). Otherwise the installation will require a stack XML file which cannot be provided for this scenario."
My question is, I just can generate the stack XML file with Solution Manager?
Best regards.
Cesar Teixeira -
Ocs package does not match the current software components
Hi Experts,
In our SAP ERP 6.0 system few components like SAP APPL,EA APPL ,FinBasis were already upgraded to 603 SP04 long time back.
Now to install language,we need to upgrade all the components to EHP3.The pre requisite to upgrade to EHP3 as per note number 1095233 is SP08.Few of our components are at SP06 level and i downloaded the supported packages of all the components to upgrade to SP08 and then upgrade to EHP3.
When i try to display/define the component ECC-DIMp,i get the eror message message" ocs package does not match the current software componentu201D when trying to apply ECC-DIMPu201D .When i looked at the queue,the SPAM is looking for prerequisites of components EA APPL 600 and SAP APPL 600(This components are already upgraded to 603 level).
Please suggest me the option.
Thanks
satishHi,
For your problem, please check SAP note 1083533, please check extract from this note:
If you cannot integrate the required component Support Packages because the import conditions are not met (for example, because you have already installed SAP_APPL 603 although SAP_APPL 600 is the prerequisite), you must update the import conditions. When you try to install EHP3 packages using the EHP installer (EHPI), the following error occurs in SPDA_EHP_INCLUSION.LOG: "OCS package SAPKxxx does not match the current software component vector" Ths system displays the same error message when you try to install packages using transaction SAINT. Proceed as described in Note 1118803.
Solution is documented in the SAP note 1118803.
Thanks
Sunny -
OCS package SAPKIPYJ61 does not match
Hi Expert
When I am applying pi_basis patches that time gives error
OCS package SAPKIPYJ61 does not match the current software component vector
SAPKIPYJ61
PI_BASIS,2005_1_640 Non-permitted release of add-on PI_BASIS installed
regds
RahulHello,
There're 2 kinds of packages: SAINT Packages and Support packages. For SAINT pacakges, they're the installation of a component, whicle support package are the patches for the component.
Which packge were you installing when you go the error:
'PI_BASIS,2005_1_640 Non-permitted release of add-on PI_BASIS installed'?
Can you please provide the name? I assume it's a SAINT pacakges. The package SAPKIPYJ61 is a support package.
Regards,
Joe -
ECC-SE OCS package SAPK-604GGINECCSE does not match the current.
HI all,
We are in process of upgrading ECC 5.0 to ECC 6.0 EHP4 SR1 SP3.
In our source system there is no Base component of ECC-SE .
As part of upgrade to ECC 6.0 EHP4 we have included this component when selecting stack in Solution manager.
But during Configuration phase in ENHANCEMENT PACK INCLUSION we are get the below error message.
Severe error(s) occured in phase PREP_EXTENSION/EHP_INCLUSION!
Last error code set: Unable to generate addon queue. Return Code = 1,
Reason = "OCS package SAPK-604GGINECCSE does not match the current
software component vect", check log file 'SPDA_EHP_INCLUSION.LOG' for details
3 ETN262 Calculating queue part for add-on "ECC-SE" rel. "604"
3 ETN490 Use the Add-On installation package "SAPK-604GGINECCSE" (type &4"AOX") for Add-On &2"ECC-SE"
rel.&3"604"
3 ETN245 The following import prerequisites of OCS Package "SAPK-604GGINECCSE" have not been met:
3 ETN264 In the (alternatively) Requirement set "01":
3WETN492 Required Add-On component "EA-HR" rel."600" is not installed
3WETN492 Required Add-On component "ECC-SE" rel."501" is not installed
3WETN491 Required software component "SAP_APPL" rel."600" is not installed
3WETN491 Required software component "SAP_HR" rel."600" is not installed
3 ETN264 In the (alternatively) Requirement set "02":
3WETN492 Required Add-On component "ECC-SE" rel."501" is not installed
3 ETN264 In the (alternatively) Requirement set "03":
3WETN492 Required Add-On component "EA-HR" rel."600" is not installed
3WETN492 Required Add-On component "ECC-SE" rel."501" is not installed
3WETN491 Required software component "SAP_HR" rel."600" is not installed
3 ETN264 In the (alternatively) Requirement set "04":
3WETN492 Required Add-On component "ECC-SE" rel."501" is not installed
3WETN491 Required software component "SAP_APPL" rel."600" is not installed
2WETN543 OCS package "SAPK-604GGINECCSE" does not match the current software component vector
1 ETN214X."**************************************************"
1 ETN251 End of phase: "'Add-on Queue Calculation'"
1 ETN254 End date: "19.07.2009"
1 ETN255 End time: "05:32:23"
Please advice me on the followinghi sunny,
SPAM is 35 ... well i have got stucked for ECC-SE 604 add-on isnot getting recognized in ssystem during upgrade as it didi not found any base component.
3 ETN262 Calculating queue part for add-on "ECC-SE" rel. "604"
3 ETN490 Use the Add-On installation package "SAPK-604GGINECCSE" (type &4"AOX") for Add-On &2"ECC-SE"
rel.&3"604"
3 ETN245 The following import prerequisites of OCS Package "SAPK-604GGINECCSE" have not been met:
3 ETN264 In the (alternatively) Requirement set "01":
3WETN492 Required Add-On component "EA-HR" rel."600" is not installed
3WETN492 Required Add-On component "ECC-SE" rel."501" is not installed
3WETN491 Required software component "SAP_APPL" rel."600" is not installed
3WETN491 Required software component "SAP_HR" rel."600" is not installed
3 ETN264 In the (alternatively) Requirement set "02":
3WETN492 Required Add-On component "ECC-SE" rel."501" is not installed
3 ETN264 In the (alternatively) Requirement set "03":
3WETN492 Required Add-On component "EA-HR" rel."600" is not installed
3WETN492 Required Add-On component "ECC-SE" rel."501" is not installed
3WETN491 Required software component "SAP_HR" rel."600" is not installed
3 ETN264 In the (alternatively) Requirement set "04":
3WETN492 Required Add-On component "ECC-SE" rel."501" is not installed
3WETN491 Required software component "SAP_APPL" rel."600" is not installed
2WETN543 OCS package "SAPK-604GGINECCSE" does not match the current software component vector
1 ETN214X."**************************************************"
1 ETN251 End of phase: "'Add-on Queue Calculation'"
1 ETN254 End date: "19.07.2009"
1 ETN255 End time: "05:32:23"
from tha above log i have considered set 2 & follwoed with sap note
1150350 Upgrade to SAP ECC 600 with Add-On ECC-SE 604
therefore it went smoothly with out issues in EHP_INCLUSION ....
-rahul -
SPAM/SAINT - OCS package does not match current software component vector
Hello Experts,
This could happen on any type of system I suspect, but it is on my Solution Manager (7.01 on Eh1). I downloaded a support stack (27)and was checking the components requirements. I use the Directory box in SPAM, and I go into New Support Packages. I highlight the support package for ST 400 then click on the Queue button. It comes back with this message: OCS package SAPKITL437 does not match the current software component vector.
I click continue and the requirements window comes up. It shows that I have currently loaded the wrong BI_Content. It says: Non-permitted release of add-on BI_CONT installed. The release information is BI_CONT,706.
If I go back to the main window to look at the current package level, I see that BI_CONT component release (loaded) is 704 - sp 8.
I must have gotten very creative when loading that back in 2008. MOPZ was used, but it was before the support stack restrictions were in place on my system.
I can't get around this issue, because even trying to load the Basis support package I get this message.
If anyone has had the problem and knows what to do I would appreciate some help. Notes searching has not found anything. So far my Customer message has not been helpfull, but it is not SAP support .
PatHi Patricia,
Please, check prerequisites for SAPKITL437 in SPAM.
It seems like you need to install/update some components in SAINT before.
From official note: https://service.sap.com/sap/support/notes/1274287
"Requirements with component ST400 for SP27
- Support Package 00 for BI_CONT 706 (SAPK-706BHINBICONT)
- Support Package 00 for ST-BCO 400 (SAPK-400AGINSTBCO)"
Additional info: https://service.sap.com/sap/support/notes/1169247
Best Regards,
Aleh
Edited by: Aleh Mikhniuk on Jul 20, 2011 1:59 PM -
The declared package does not match the expected package
I was given some Java code that I need to get working and then make some improvements on, but I'm still in the process of learning Java and the IDE Eclipse as well. There is a package called MyGUI and most of the files in that package had the error "The declared package MyGui does not match the expected package MyGUI" as a result of the inconsistent case, so I changed all of the first lines "package MyGui" to "package MyGUI" and this fixed all of those problems except for one.
There is still one file where it gives this error message even though I changed the code the same way I did for the other files. I can't figure why this file is different. I saved it and I also refreshed everything, but it still gives me the error message "The declared package MyGui does not match the expected package MyGUI" although the package is clearly declared as "MyGUI".
Does anyone have an idea of why this would be? I am very new to Eclipse and Java, so I don't really know how to go about solving errors yet.Forget the IDE until you get a handle on basic concepts like packages and classpath.
The error you're talking about comes when a .java or .class file is not in a directory that matches its declared package.
Let's say that CLASSPATH_ROOT is the only element in your classpath. If you have a class that is declared like so:
package com.foo;
class Bar {}Then, you must have CLASSPATH_ROOT/com/foo/Bar.java or CLASSPATH_ROOT/com/foo/Bar.class.
The language rules for .java files are not as strict as those for .class files, but some compilers may expect them to be the same, and it's a good idea to do so even if it's not strictly necessary, for clarity's sake.
Also, even though Windows' file system is not case sensitive--that is it considers FOO.class and foo.class the same file name--Java is. You probably can't directly rename FOO.java to Foo.java in Windows, as it will say it's the same name, so if you need to change the case, rename it to a different name, than back to Foo with the correct case.
Edited by: jverd on Mar 29, 2009 12:07 PM -
hi i am trying to install NI-VISA driver on SUSE LINUX 11.1.
the error message it shows is
******************************** ERROR ****************************************
* The version of gcc in the path does not match the version of gcc used to *
* compile the currently running kernel. This can cause unpredictable *
* behavior in kernel drivers and should be fixed. *
* gcc version: Linux) *
* kernel compiled with: 4.3.2 *
******************************** ERROR ****************************************
my kernel source version is
linux-8nes:/home/admin # rpm -qi kernel-source
Name : kernel-source Relocations: /usr/src
Version : 2.6.27.29 Vendor: openSUSE
Release : 0.1.1 Build Date: Sun 16 Aug 2009 03:43:52 PM IST
Install Date: Sat 24 Oct 2009 02:13:12 AM IST Build Host: rinck
Group : Development/Sources Source RPM: kernel-source-2.6.27.29-0.1.1.src.rpm
Size : 309251954 License: GPL v2 only
Signature : RSA/8, Sun 16 Aug 2009 03:57:25 PM IST, Key ID b88b2fd43dbdc284
Packager : http://bugs.opensuse.org
URL : http://www.kernel.org/
Summary : The Linux Kernel Sources
Description :
Linux kernel sources with many fixes and improvements.
Authors:
Linus Torvalds <[email protected]>
see /usr/src/linux/CREDITS for more details.
Source Timestamp: 2009-08-15 17:53:59 +0200
GIT Revision: 8a413546901c407e96f7fba18574cceeb40452af
GIT Branch: SLE11_BRANCH
Distribution: openSUSE 11.1
i had also installed GCC 4.3.2.
it shows the error message as i had posted.
please kindly help me on this.
Thanks and regards,
P.karthickCheck this solution
-
Eclipse error : The declared package does not match the expected package
I'm trying to setup an Eclipse project on some existing code but I can't get past this error. The source files are in the following directories:
d:\mycompany\coolstuff
d:\mycompany\neatstuff
The source files in the coolstuff directory have a package statement:
package mycompay.coolstuff
The source files in the neatstuff directory have a package statement:
package mycompany.neatstuff
I create a new Eclipse Java project, specify the existing directoy of d:\mycompany. When Eclipse tries to build, it gives the following error:
The declared package "mycompany.coolstuff" does not match the expected package "coolstuff"
I've tried everything I can think of short of modifying every package statement since they seem correct based on the Java documentation. What am I missing?All the source builds just fine using a command
nd line and a classpath=.\That's meaningless, since classpath=.\ is just setting the classpath to the current directory.
d:\mycompany\coolstuff
d:\mycompany\neatstuff
The source files in the coolstuff directory have a
package statement:
package mycompay.coolstuff
The source files in the neatstuff directory have a
package statement:
package mycompany.neatstuff
I create a new Eclipse Java project, specify the
existing directoy of d:\mycompany.When you use the package statement "package mycompay.coolstuff" Eclipse looks in the directory above mycompany for mycompay\coolstuff\<classname>, and that directory is d:\, not d:\mycompany.
When Eclipse
tries to build, it gives the following error:
The declared package "mycompany.coolstuff" does not
match the expected package "coolstuff" -
I have a Windows Phone Silverlight 8.1 project that i am trying to publish
The publisher in the uploaded package does not match the
expected publisher. The expected publisher for this app is: "CN=00000000-8F5B-44B4-BFC6-F16FB18F2358"
I have the same Publisher Id set in the WMAppManifest file
help me
thank youHi kadir u,
>>The publisher in the uploaded package does not match the expected publisher. The expected publisher for this app is: "CN=00000000-8F5B-44B4-BFC6-F16FB18F2358"
Based on the error information, we can see that the publisher value does not have the correct one. So please try to open the Package.appxmanifest, then modify the Publisher as "CN=00000000-8F5B-44B4-BFC6-F16FB18F2358":
<Identity Name="*******"
Publisher="CN=00000000-8F5B-44B4-BFC6-F16FB18F2358"
Version="1.0.0.0" />
Best Regards,
Amy Peng
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.
Maybe you are looking for
-
Multi DP in WAD and its impact on Performance ?
Hello Experts, I am working on WAD reports with multiple Data Providers, I.e. Web Template with DP1, DP2, DP3, DP4 --- Query 1 DP5, DP6, DP7, DP8 --- Query 2 Purpose - i have used Tab Strip Item with eight
-
My impression after 1 day having my Ipad2
Hi everybody, I just wanted to share my first impression on my Ipad2. As a non-apple user (I never had any Apple related computer, Ipod,...) In Spain the release dat was last friday. Well here go my impression of my Ipad2 32GB + 3G: 1) First of all t
-
Wife has a Mac Mini that was under my name. Have lots of apps. Just bought her a new mac mini. Can I use my app store account to update her new computer, yet let have her own iCloud identity?
-
Dear experts.. Here i am posing this question after big R&D in SDN. My question is How to put user exit as object in Resume.. Plz answer this query with example(for va01) Thanks in advance Somesh
-
Assessable vaue in PO - table entry
Dear Experts, How can I findout the assessable value for import PO in a table? Because we need to calculate some values based on assessable value of the material per PO and PO contains huge number of material (around 900) and it is difficult to see a