OCSM FOR MULTI CLIENT INSTALL

Can anyone give me a clue as to why the Oracle Client Configuration Manager and the Oracle Client Software Agent do not appear as installable programs when you run Installer from the CD (and the Installer patch come to that)?
Thanks.

Hi SYDZ!!,
You can install and activate Creative Cloud desktop applications on two computers, regardless of operating system, for the individual associated with the Creative Cloud membership. See the product license agreements page for more information.
Link: http://www.adobe.com/in/products/creativecloud/faq.html#what-cc
Regards,
Romit Sinha

Similar Messages

Difference between two queries for no client installed

I have created a collection for all discovered computers with no client installed using the following query:
select SMS_R_SYSTEM.ResourceID,SMS_R_SYSTEM.ResourceType,SMS_R_SYSTEM.Name,SMS_R_SYSTEM.SMSUniqueIdentifier,SMS_R_SYSTEM.ResourceDomainORWorkgroup,SMS_R_SYSTEM.Client from SMS_R_System where SMS_R_System.Client is null
If I go to Monitoring -> Client Status -> Client Activity and click on the link next to the pie chart for no clients installed I get a completely different result and they neither query contains the same computers as each other.
Anyone know what the exact query the link in the monitoring section is using and why the results between the two are completely different?
If would expect them to match up or at the very least that my first query should be the source of truth.

If I use:
select SMS_R_SYSTEM.ResourceID,SMS_R_SYSTEM.ResourceType,SMS_R_SYSTEM.Name,SMS_R_SYSTEM.SMSUniqueIdentifier,SMS_R_SYSTEM.ResourceDomainORWorkgroup,SMS_R_SYSTEM.Client from SMS_R_System where SMS_R_System.Client is null OR SMS_R_System.Client = 0
and use the same limiting collection as the built in monitoring query "All Desktop and Server Clients" I actually get 0 results from the query. If I use "All Systems" as the limiting collection I still only get the same results
that I do with out also querying for "equals 0" as well.
I read one article that said that "equals 0" actually shows you the clients had the CCM client but it was uninstalled where "is Null" returns systems that never had the CCM client.
I don't know if this is accurate but it doesn't explain why a built in monitoring query would return inaccurate results. It only returns a fraction of the non-client systems that the above query returns and as mentioned, the systems returned in one
are not included in the other.

OneDrive for Business sync prompts for ODfB client install

Working with a client that has installed Office 2013 ProPlus on an image that is being deployed. Users currently logon to their computer with a local account (Active Directory in process of being deployed).  User is "migrated" and begins
to logon to Active Directory. User now logs on to the O365 portal and accesses their OneDrive site, not yet populated with documents. User clicks "sync" and is prompted to install a OneDrive for Business client, even though it has
already been installed as part of Office 2013 ProPlus. Install proceeds and Internet Explorer closes. Once install has completed, user logs on to O365 portal and attempts to sync OneDrive.   User is prompted again to install the appropriate
client.
I have tried clearing IE cache, launching IE in InPrivate mode and using Chrome.   Same behavior.
Any suggestions?
Thanks,
[email protected]

New fun behavior noted:
New behavior. Similar scenario:   User logging on to PC with a local account.   Office 2013 ProPlus, including ODfB is installed.   User is NOT currently using ODfB. Using Word
2013, Excel 2013, PPT 2013, Outlook 2013 ( connecting to Office 365 mailbox) and Lync 2013 (connecting to Lync Online) are being used by the users. Users machine is joined to a domain, User local account profile is migrated to domain profile.
User logs into PC with domain account. ( Matching the Office 365 account, typically [email protected] ). User logs into Outlook and Lync with no issues. User logs into the Office 365 Portal, selects OneDrive, and selects Sync.
"Sync this library to your device for easy access" window appears. User selects Sync now.. User is presented with "Sign in Call us overprotective, but we need to verify you account again before opening "https://realgoods-my.sharepoint.com""
windows. User enter his email address and clicks Next. User is then presented with "Sign In" windows and enters User ID and password. User is then presented with the "Overprotective" window. This happens 3 times
until user gets "We cannot connect to the specified SharePoint site." error message.
IE browser cache has been cleared. Steps have been followed to clear all document cache files. sharepoint.com, microsoftonline.com, office365.com have been added to the Trusted Sites zone and added to IE compatibility list.
Any clues on this one as well????
R,
Dale
[email protected]

Automation scripts for Instant client install\ add TNS entry

Guys,
I'm trying to develop an VB application,which uses data from an Oracle server residing in my neighbour's system.
My system doesn't have oracle client installed.
So, I've made use of Oracle Instant Client package-OCBC.
Now, I'm looking for an automation script that would do the following in order
1)Uzip the instant client into a directory. (say C:\ondemand\instantclient)
2)Add this directory into the PATH environment variable
3)Set up Service Names with tnsnames.ora ie. Create a TNSNAMES.ORA file to configure my Oracle instance connection.
4)Set the TNS_ADMIN environment variable to be the path to the tnsnames.ora
Can someone help me out with automated scripts?
Thanks,
Bhagat

Don't worry. I've solved it.
One of the files I was using stated: Always set the TNS_ADMIN environment variable or registry setting to the full path of the tnsnames.ora file.
I took that to mean including the "tnsnames.ora". It doesn't. It really does mean just the PATH part.
However, with this corrected, I got the pulldown populated. But with only the first part of the name, from the tnsnames.ora file. tnsnames.ora had mydb.<domain>.com. The pulldown only had mydb. Manually adding the .<domain>.com to it worked.
Now on to the next problem. <GRIN>
Cheers,
Eddie

TMS configuration for multi-clients in one system

Hi All,
we have got some problem defining transport routes in stms in transport domain...
We have to add to target group for one system 6 clients:3 clients with the dev/test roles for country X and 3 clients with dev/test roles for country Y.
Transport requests have to route only between clients for defined country (only for country X or only for country Y, must not mix).
How i can get status when transport requests will route in one system only between clients of country X (or only for country Y)?
Should i define two target groups and add to one group 3 clients for X and to the second 3 clinets for Y? I am not sure that it is enough. May be exists a lot of other options/ actions?
Where is garanthy that requets from country X will not mixed with requests from Y?
Thanks a lot.

> The SSO is working fine for only the client which we used to import the certificate (verify.der).
> 1>Is it that the certificate import should be done from all the clients exclusively ?
Logon ticket certificate is instance wide, not client dependent. And you need to call STRUSTSSO2 in client 000 to export/import.
> And the SSO is not working for other clients in the same system .
> 2>If yes can you tell the procedure, why b'coz transaction STRUSTSSO2 is same for all clients and if we try to import the certificate again how about the existing one over there ?
Could you provide more details about this issue you're facing? What is the Portal UME source? What application is it based on, BI or ESS/MSS?

Site Code for SCCM Clients installed from Secondary Site Server

Hello,
We have started the implementation of SCCM 2012 R2 at our network. We have setup a Primary site (JFO) server & pushed out the installation of SCCM clients to the local subnet. Things went fine.
We have installed a Secondary site (ATC) at a remote network. We have tested client installation in the installation wizard we specify to install the client from the Secondary server. When SCCM client installed from the Secondary server, the site
code that appears on the client in the control panel->Configuration Manager client settings is the site code of the primary site and not the secondary site.
Is this behavior is normal

Ultimately, secondary sites do *not* manage clients and so will never be assigned to the secondary site. However, do note that resources in the console that represent systems that do not have the client agent may show the site code of the secondary site
if they fall within a boundary group associated with that secondary site. This is done so that client push can be initiated from the correct site. More gory details at http://blog.configmgrftw.com/secondary-sites-and-boundary-groups/
Jason | http://blog.configmgrftw.com | @jasonsandys

Creative Cloud - Multi-client install?

I'm reviewing my options with Creative Cloud. Nowhere can I find whether CC binds me to the software being only allowed to be installed on a single client or if, as now with my CS6 licence, I am entitled to install the software on 2 clients.

Hi SYDZ!!,
You can install and activate Creative Cloud desktop applications on two computers, regardless of operating system, for the individual associated with the Creative Cloud membership. See the product license agreements page for more information.
Link: http://www.adobe.com/in/products/creativecloud/faq.html#what-cc
Regards,
Romit Sinha

Transaction Launcher for Multi Client system

Hi Gurus,
I need a very big help. This is my problem:
The CRM system on which I'm currently working has two client 1 and 2 and the second one
is closed to customizing, so that all the settings we can make are on
1. When we create a transaction laucher object, by
transaction CRMC_UI_ACTIONWZ, we got the following error: "An RFC
destination could not be specified for the logical system 2" (even if the connection are all set up)
and if we set it from 2 at the end of the process we get the
following message: "Client 2 has status not modifiable".
In this way both on client 1 and 2 we´re able to execute only
transactions of client 1.
All the settings have been done according to the official SAP guide.
Since on SAP guides there are no information about how set up the
transaction laucher in a similar situation, how can we solve this issue?
Please, reply as soon as possible.
Thanks a lot,
A.G.

Hi Helmut,
well I am also not sure what they did, but anyway, from the beginning on bw is designed to have only one client to work in. Technically I believe that all of the 'BW-Tables' storing the BW metadata don't have a client field. So how will you separate developments of different clients?
regards
Siggi

Server sizing for multi-client Acrobat Reader access of .pdf files

I am trying to specify the appropriate file server (need processor rating & memory size)running Windows 2008 for 64 high tempo users on a LAN accessing large .pdf files (~20 mb each) using Acrobat Reader 8 or 9. Total data package size is about 30 Gig. LAN is Gigabit speed on CAT 6 cable.
Suggestions?

Time is 10:35 PM, Jan 30, 2014 after a day of nerve racking attempts to get Adobe Reader 11.0.6 to open a pdf file I have finally succeeded in doing so. The following apkhan response to my original inquiry, even though it didn't directly help me much, but it gave me an insight that what I was inquiring about in the description of my problem had to do something with the EULA I was inquiring about and couldn't find were and how that is to be done. For whatever reason I had installed Reader 11.0.6 three times throughout the day and still couldn't read a pdf file or see the EULA to agree to it or not. During another installation of Reader 11.0.6 at 9:00PM, 1-30-14, a window appeared and required my administrative password to install the software and rightly so. This is probably the reason why Reader was so dysfunctional, because for whatever reason, this approval window didn't appear during the initial installations but I was allowed to install Reader anyways and the proof of it was it did end up in my Applications Folder-confusing and strange at best. Without my administrative password the software should not have been allowed to be installed and this has always been the case. I will have to dwell upon that one for a while. Anyway, for everyones information, the Mac version of 11.0.6 Adobe Reader doesn't ask for you to click a button to Agree or Not Agree to an EULA verbiage statement. Just above the INSTALL BUTTON (Yellow Background) on the installation window the instructions notes, when you hit the install button you aromatically agree to the EULA and the way you go. I tried getting into the EULA via the Adobe the desktop Icon but to no avail. Hopes this helps someone else. Thanks to those at the Adobe Community that tried to help me with this mind boggling episode.

Chat Programm for multi client-server on LAN

import java.net.*;
import java.io.*;
public class ChatClientThread extends Thread
{ private Socket socket = null;
private ChatClient client = null;
private DataInputStream streamIn = null;
public ChatClientThread(ChatClient client, Socket socket)
client = _client;
socket = _socket;
open();
start();
public void open()
try
streamIn = new DataInputStream(socket.getInputStream());
catch(IOException ioe)
System.out.println("Error getting input stream: " + ioe);
client.stop();
public void close()
try
if (streamIn != null) streamIn.close();
catch(IOException ioe)
System.out.println("Error closing input stream: " + ioe);
public void run()
while (true)
try
client.handle(streamIn.readUTF());
catch(IOException ioe)
System.out.println("Listening error: " + ioe.getMessage());
client.stop();
public static void main(String args[])
}

Refer to the response here:
http://forums.sun.com/thread.jspa?threadID=5428090

Oracle 9i client install fails to load disk 3

I downloaded the Oracle 9.2 database software from OTN. I'm trying to install the 9i client from this software. I've extracted the disk1, disk2, disk3 to separate directories. I run the install from disk1 and it gets about 90% into the install, then it requests disk 3. When the "Disk Location" dialog box comes up I set the path to the appropriate location for disk 3. Then I click OK. The OUI comes right back with the same dialog box. I have verified that the path to disk is correct. Any ideas? The install cannot get past this.

Negative. The installer only asks for disk 3. I'm installing from the Oracle 9.2 Enterprise Edition download. I'm just choosing to install the client. I just figure for a client install, it doesn't need to access the contents of disk 2. Incidentally, even if I direct the installer at disk 2, I receive the same results. Nothing happens.

ASIO Multi-Client Support - Feature Request

When AA 3 opens an ASIO device, it hogs takes possession of the whole device, even though some device drivers are built for multi-client support. Other audio applications that allow for this functionality have preference screens built in with which you can choose the individual channels that will be used by the software - if a series of channels is not in use by that one application, then another audio application can utilize the unused ports.
For example, I may choose to activate and use digital output channels 1-8 of an RME FireFace in Sonar as VSTi outputs, do a loopback in the RME TotalMix mixer, and then choose to use those same inputs to record into Reaper. As long as I have only activated the 8 outputs in Sonar and the 8 inputs in Reaper, everything is copacetic.
One can also use the pairs of outputs and split these multi-client interfaces into two halves (or any division, really) and have quite a bit of versatility - the only caveat being that there can only be a single word-clock (sample rate) for everything.
If the developers could see fit to implement this in the next version, it would be nice. I would like to get down to using just Reaper and AA and this recognition of multi-client capability would certainly help that cause.
--Dean

With CoolEdit I could use the RME Digi96 soundcard together with Digicheck.
But with Au I can not. A pity...

Client Install Size

Is there a way to have OCI support for an application without installing 300+ MB for the client install? I am trying to distribute a program using the smallest install size possible, but it has to support OCI.
Thanks

I also need a minimal install of an OCI client. Local service naming (tnsnames.ora) is all I need, no directory client, no SQLPlus, no frills. Does anyone know if Oracle provides anything like this?
Has anyone managed to do this ?
I need it for 9iR1 or 9iR2.

Perl and Oracle Client Install

Hi,
When installing the Oracle Client on user machines, does it not install Perl as well? Something like $ORACLE_HOME/perl/.....
I am installing the client and I am not seeing this. Or this only for the non-client versions?
By the way I am installing Oracle 10gR1 (10.2.0.1)

Ya I did the client install as well and noticed that I had it as well, but for the client install on 10gR1 it is not. This is weird. Basically I am trying to apply a patch using OPatch and it keeps saying that Perl is needed. When I downloaded the Perl manually, it still said that it could not reconize Perl. Any thoughts?

Multi-client Server Design

Hello all,
I'm really looking for best practices on multi-client UDP or TCP servers. In reading the java tutorials, it seems like the way to go for multi-client TCP servers is a threaded application, with threads for each client connection. I haven't found out what one would do for a multi-client UDP application....
Anyways, I was hoping you might be able to point me to some tutorials/online learning resources that deal in design/best-practices.

Hello all,
I'm really looking for best practices on multi-client UDP or TCP servers. In reading the java tutorials, it seems like the way to go for multi-client TCP servers is a threaded application, with threads for each client connection. I haven't found out what one would do for a multi-client UDP application....
Anyways, I was hoping you might be able to point me to some tutorials/online learning resources that deal in design/best-practices.

OCSM FOR MULTI CLIENT INSTALL

Similar Messages

Maybe you are looking for