OCT MSP File Not Applying Changes

Hello All,
I am trying to use an msp file to apply some settings changes; e.g. add and remove a new Normal.dotm, themes, Outlook defaults, etc. When I edit the file, everything entered in correctly. I have tried using a batch file and manually running the
msp file and still nothing. I'm getting a little frustrated as I don't understand why it's not working. I use a similar msp file for a new deployments and the configurations get applied. Why doesn't this one work? Any help would be
greatly appreciated.

Some settings/features within the OCT, are only applied during the initial installation of Office, and do not apply/update an existing installation of Office.
It's not well documented which settings behave like that, but if you review the TN library documentation for Office customization, there is mention of that limitation.
On a test machine, if you remove Office (uninstall it), and then reinstall it whilst referencing your updated/revised MSPfile, does it work ok?
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

Similar Messages

Lightroom 5.3 - Export not applying changes to all file formats

Using Lightroom 5.3 with Camera Raw 8.3 on Mac OS X Mavericks 10.9.2
Camera is a Canon EOS 70D, working with Raw files.
Just noticed that when applying a range of changes to an image - Tone / Presence / Noise / Crop / Sharpening (and others)
When exporting the image
- export to JPG, TIFF and PSD works ok, all changes applied correctly
- export to Raw and DNG do not include changes applied to image - original image is exported
Not a show stopper as I have usable formats, but would like all file formats available for flexibility.
Anyone else noticed this ?
Chris.

A RAW file is a RAW file.
DNG is also a RAW format
Lightroom will not alter RAW fomat files on export, as in develop edits.
(it will record those edits in metadata if asked so another application capable of interpreting Lightroom edits can read and apply those edits - like ACR.)
DNG exports can be altered to various flavours of DNG but that does not include develop edits.
A colourspace can also be added as appropriate.
The other formats are derivative files and develop edits are baked in on export.
Tony Jay

Sysprep unattend file not applying when image is captured with wds (no errors)

So I've been around the block a bit using sysprep and wds. Recently I've created a reference image with a virtualbox environment using windows 7 x64. I was succesfully able to create a reference image, sysprep it and capture it to the wds server. My
plan there after was to create driver specific images for each model computer we use here after not having much success using the driver store (another story)
Any how So I take my reference image and deploy it to a new computer... In this case an HP Probook 5310m. Install any missing drivers and Sysprep it with the following command. sysprep /generalize /oobe /unattend:unattend.xml /shutdown
Below is the sysprep file I have been using
<?xml version="1.0" encoding="utf-8"?>
<unattend xmlns="urn:schemas-microsoft-com:unattend">
<settings pass="generalize">
<component name="Microsoft-Windows-Security-SPP" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<SkipRearm>0</SkipRearm>
</component>
<component name="Microsoft-Windows-PnpSysprep" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<DoNotCleanUpNonPresentDevices>true</DoNotCleanUpNonPresentDevices>
<PersistAllDeviceInstalls>true</PersistAllDeviceInstalls>
</component>
</settings>
<settings pass="specialize">
<component name="Microsoft-Windows-Security-SPP-UX" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<SkipAutoActivation>true</SkipAutoActivation>
</component>
<component name="Microsoft-Windows-Shell-Setup" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<ShowWindowsLive>false</ShowWindowsLive>
<TimeZone>Eastern Standard Time</TimeZone>
<CopyProfile>true</CopyProfile>
<ProductKey>74fdj-7dtw8-q9mp9-ypth8-qb27y</ProductKey>
</component>
</settings>
<settings pass="oobeSystem">
<component name="Microsoft-Windows-Shell-Setup" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<OEMInformation>
<Logo>c:\windows\system32\oemlogo.bmp</Logo>
<SupportHours>Regular Business Hrs (Overnight Support Provided)</SupportHours>
<SupportURL>url</SupportURL>
<SupportPhone>Phone number</SupportPhone>
</OEMInformation>
<OOBE>
<HideEULAPage>true</HideEULAPage>
<NetworkLocation>Work</NetworkLocation>
<ProtectYourPC>1</ProtectYourPC>
<HideWirelessSetupInOOBE>false</HideWirelessSetupInOOBE>
</OOBE>
<UserAccounts>
<LocalAccounts>
<LocalAccount wcm:action="add">
<Password>
<Value>TAAxAEQAMwBzAHQAcgBpACEAUABhAHMAcwB3AG8AcgBkAA==</Value>
<PlainText>false</PlainText>
</Password>
<Description>Local Administrator</Description>
<DisplayName>Root</DisplayName>
<Group>Administrators</Group>
<Name>Root</Name>
</LocalAccount>
</LocalAccounts>
</UserAccounts>
<TimeZone>Eastern Standard Time</TimeZone>
<ShowWindowsLive>false</ShowWindowsLive>
<FirstLogonCommands>
<SynchronousCommand wcm:action="add">
<Order>1</Order>
<CommandLine>slmgr.vbs /ipk {serial key}</CommandLine>
</SynchronousCommand>
<SynchronousCommand wcm:action="add">
<Order>2</Order>
<CommandLine>slmgr.vbs /ato</CommandLine>
</SynchronousCommand>
</FirstLogonCommands>
</component>
<component name="Microsoft-Windows-International-Core" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<InputLocale>en-US</InputLocale>
<SystemLocale>en-US</SystemLocale>
<UILanguage>en-US</UILanguage>
<UILanguageFallback>en-US</UILanguageFallback>
<UserLocale>en-US</UserLocale>
</component>
</settings>
<cpi:offlineImage cpi:source="catalog:v:/sources/install_windows 7 professional.clg" xmlns:cpi="urn:schemas-microsoft-com:cpi" />
</unattend>
The machine succesfully syspreps and shuts down. I restart the computer pxe boot and capture the image succesfully.
Now here comes my problem...
Upon deploying the above driver specific image.. my sysprep file is not applied. Nothing from the OOBE wizard answers to the pc logo , or first logon commands are applied ... nothing.. I have gotten no errors during this whole process. I have
started to try to read the logs within the panther folder but havent gotten far.
What is weird to me is that I have tried recreating this image... deploy the reference image... add drivers ... sysprep ...shutdown. And if I boot normally (without capturing the image) the computer shows all of the sysprep changes.. Only when
i capture the image does it not apply the changes....
I'm stumped...
Any ides?

Confirm this scenario: You installed Windows, then ran sysprep and used the /unattend switch. Then you captured the image.
In this scenario there are 2 deployment methods.
1. If you deploy the image with DISM, the answer file generated by sysprep is detected on first boot and settings are applied. It is the same function as if you ran sysprep and chose to restart.
2. If you deploy the image using Setup.exe, it does not use the answer file specified by sysprep prior to capturing. I have not looked into *why* this happens, but I suspect that after the image is applied, it replaces the unattend.xml with the generic one.
If you are using Setup.exe, you need to use its /unattend switch and point to the answer file location. This location cannot be inside of the image. If you are not using setup.exe in a manual method (using WDS) you will need to apply the answer file to the
install image in the WDS snap-in.

Custom Word 2010 Normal.dotm file not applying

I have replaced the Normal.dotm file with a file with out letterhead information on it. On some computers its not applying though. I saved the letterhead file as Normal.dotm and have replaced the Normal.dotm file on their computer but when they open Word
it still opens a blank document. If I replace it on my computer it loads the letterhead file and the same with other users. Its just a select few that ignore the new Normal.dotm file.
I can prove that the file has the letterhead text by renaming the file on their computer and then opening it. When I do this it opens with the letterhead text.
Free computer help and tips http://www.onlinecomputertips.com

A part of the problem you are seeing is that Word creates its own normal.dotm file when it can't find one where it is supposed to look.
Here is a link to the Microsoft take on sharing the normal template.
You Cannot Share the Normal.dot[m] File Among Multiple Users This is an older article but nothing it says has changed. That is how Word works. When I first was setting up a
LAN using Word, I tried sharing the normal template as well. It is intuitive to do so; but it does not work. The more users you have the more problems it can cause. It is likely that you have had problems with sharing normal.dotm but not recognized that the
problems were caused by that.
The normal template is intended to be a personal workspace/resource and should not be overwritten from a main source. It should be stored in the user templates folder (which also should not be a shared folder). You certainly can create a customized normal.dotm
template and distribute it as a starting point but there is little reason to do so.
Overwriting someone else's normal.dotm template is a bit like opening the drawers in their desk and rearranging them, tossing out items if you don't know their purpose. I learned long ago to not be going through my secretary's drawers!
If you want to standardize your documents you can do that with a combination of
Workgroup Templates and
Global Templates. Global templates will let you share custom building blocks, macros, ribbon and QAT modifications. You can even use them to share styles although usually that is better
done through document templates.
It is quite possible to have a different template than the normal template be the basis for the blank document you see when you start Word or for when you use Ctrl+N. There are examples of this on my downloads page.
Downloads - Microsoft Word - Add-Ins - Tutorials - Letterhead - Templates
Charles Kenyon Madison, WI

PL/SQL problem with too many lines - can not apply changes

I have a complex PL/SQL that requires checking 90 check boxes and the query works to a certain point then it just stops being able to be saved (apply changes) after a high no. of lines has been typed in. (The PL/SQL query is to check against a file, that the file has all the check boxes as yes. If there is only 1 or 2 boxes checked, then the sql created only checks those 2 fields for yes.) Is there a way to increase the coding space (or number of lines) that APEX can save/use.

This is the whole PL/SQL coding. At this point, we cannot add any more lines or it will come up with "web page cannot be found" message.
declare
q varchar2(32767); -- query
new varchar2(1):='Y'; -- first one
begin
q := 'select a."CONTR_ID", a."NAME", b."PHONE_NO", b."EMAIL_ADDR" FROM contractor a, contacts b where a.contr_id = b.contr_id and a.contr_id not in (Select unique a."CONTR_ID" from contractor a, contractor_competency b where a."CONTR_ID" = b."CONTR_ID" ';
-------------------Start ENV
if :P33_AIR_QUALITY_TESTING = 'YES' then
if new = 'Y' then q := q || ' and ('; new := 'N';
else q := q || ' or '; end if;
q := q || '(instr(upper(b."JOB"),upper(''Air Quality Testing'')) > 0) and
((instr(upper(b."SET_YES_NO"),''NO'') > 0) or
(instr(upper(b."CRAFTMAN_YES_NO"),''NO'') > 0) and
(instr(upper(b."PROBATION_YES_NO"),''NO'') > 0)) ';
end if;
if :P33_ASBESTOS_REMOVAL_DEEN = 'YES' then
if new = 'Y' then q := q || ' and ('; new := 'N';
else q := q || ' or '; end if;
q := q || '(instr(upper(b."JOB"),upper(''Asbestos Removal De-Energized'')) > 0) and
((instr(upper(b."SET_YES_NO"),''NO'') > 0) or
(instr(upper(b."CRAFTMAN_YES_NO"),''NO'') > 0) and
(instr(upper(b."PROBATION_YES_NO"),''NO'') > 0)) ';
end if;
if :P33_ASBESTOS_REMOVAL_ENER = 'YES' then
if new = 'Y' then q := q || ' and ('; new := 'N';
else q := q || ' or '; end if;
q := q || '(instr(upper(b."JOB"),upper(''Asbestos Removal Energized'')) > 0) and
((instr(upper(b."SET_YES_NO"),''NO'') > 0) or
(instr(upper(b."CRAFTMAN_YES_NO"),''NO'') > 0) and
(instr(upper(b."PROBATION_YES_NO"),''NO'') > 0)) ';
end if;
if :P33_BUILDING_ASBESTOS_REMOVAL = 'YES' then
if new = 'Y' then q := q || ' and ('; new := 'N';
else q := q || ' or '; end if;
q := q || '(instr(upper(b."JOB"),upper(''Building Asbestos Removal'')) > 0) and
((instr(upper(b."SET_YES_NO"),''NO'') > 0) or
(instr(upper(b."CRAFTMAN_YES_NO"),''NO'') > 0) and
(instr(upper(b."PROBATION_YES_NO"),''NO'') > 0)) ';
end if;
if :P33_ENVIRONMENTAL_CONSULTING = 'YES' then
if new = 'Y' then q := q || ' and ('; new := 'N';
else q := q || ' or '; end if;
q := q || '(instr(upper(b."JOB"),upper(''Environmental Consulting'')) > 0) and
((instr(upper(b."SET_YES_NO"),''NO'') > 0) or
(instr(upper(b."CRAFTMAN_YES_NO"),''NO'') > 0) and
(instr(upper(b."PROBATION_YES_NO"),''NO'') > 0)) ';
end if;
if :P33_MANHOLE_ASBESTOS_REM_DEEN = 'YES' then
if new = 'Y' then q := q || ' and ('; new := 'N';
else q := q || ' or '; end if;
q := q || '(instr(upper(b."JOB"),upper(''Manhole Asbestos Removal De-Energized'')) > 0) and
((instr(upper(b."SET_YES_NO"),''NO'') > 0) or
(instr(upper(b."CRAFTMAN_YES_NO"),''NO'') > 0) and
(instr(upper(b."PROBATION_YES_NO"),''NO'') > 0)) ';
end if;
if :P33_MANHOLE_ASBESTOS_REM_ENER = 'YES' then
if new = 'Y' then q := q || ' and ('; new := 'N';
else q := q || ' or '; end if;
q := q || '(instr(upper(b."JOB"),upper(''Manhole Asbestos Removal Energized'')) > 0) and
((instr(upper(b."SET_YES_NO"),''NO'') > 0) or
(instr(upper(b."CRAFTMAN_YES_NO"),''NO'') > 0) and
(instr(upper(b."PROBATION_YES_NO"),''NO'') > 0)) ';
end if;
if :P33_OIL_FILTERING = 'YES' then
if new = 'Y' then q := q || ' and (';
new := 'N';
else
q := q || ' or '; end if;
q := q || '(instr(upper(b."JOB"),upper(''Oil Filtering'')) > 0) and
((instr(upper(b."SET_YES_NO"),''NO'') > 0) or
(instr(upper(b."CRAFTMAN_YES_NO"),''NO'') > 0) and
(instr(upper(b."PROBATION_YES_NO"),''NO'') > 0)) ';
end if;
if :P33_OIL_SAMPLING = 'YES' then
if new = 'Y' then q := q || ' and (';
new := 'N';
else
q := q || ' or '; end if;
q := q || '(instr(upper(b."JOB"),upper(''Oil Sampling'')) > 0) and
((instr(upper(b."SET_YES_NO"),''NO'') > 0) or
(instr(upper(b."CRAFTMAN_YES_NO"),''NO'') > 0) and
(instr(upper(b."PROBATION_YES_NO"),''NO'') > 0)) ';
end if;
if :P33_OIL_SPILL_CLEANUP = 'YES' then
if new = 'Y' then q := q || ' and (';
new := 'N';
else
q := q || ' or '; end if;
q := q || '(instr(upper(b."JOB"),upper(''Oil Spill Cleanup'')) > 0) and
((instr(upper(b."SET_YES_NO"),''NO'') > 0) or
(instr(upper(b."CRAFTMAN_YES_NO"),''NO'') > 0) and
(instr(upper(b."PROBATION_YES_NO"),''NO'') > 0)) ';
end if;
if :P33_PUMPING_OUT_MANHOLES = 'YES' then
if new = 'Y' then q := q || ' and (';
new := 'N';
else
q := q || ' or '; end if;
q := q || '(instr(upper(b."JOB"),upper(''Pumping Out Manholes'')) > 0) and
((instr(upper(b."SET_YES_NO"),''NO'') > 0) or
(instr(upper(b."CRAFTMAN_YES_NO"),''NO'') > 0) and
(instr(upper(b."PROBATION_YES_NO"),''NO'') > 0)) ';
end if;
if :P33_SIGNED_ENVIRO_DOCS = 'YES' then
if new = 'Y' then q := q || ' and (';
new := 'N';
else
q := q || ' or '; end if;
q := q || '(instr(upper(b."JOB"),upper(''Signed Enviro Docs PRO-MS-008'')) > 0) and
((instr(upper(b."SET_YES_NO"),''NO'') > 0) or
(instr(upper(b."CRAFTMAN_YES_NO"),''NO'') > 0) and
(instr(upper(b."PROBATION_YES_NO"),''NO'') > 0)) ';
end if;
if :P33_TRANSPORTATION_OF_D_GOODS = 'YES' then
if new = 'Y' then q := q || ' and (';
new := 'N';
else
q := q || ' or '; end if;
q := q || '(instr(upper(b."JOB"),upper(''Transportation of Dangerous Goods'')) > 0) and
((instr(upper(b."SET_YES_NO"),''NO'') > 0) or
(instr(upper(b."CRAFTMAN_YES_NO"),''NO'') > 0) and
(instr(upper(b."PROBATION_YES_NO"),''NO'') > 0)) ';
end if;
if :P33_TRANSPORTATION_OF_PCB = 'YES' then
if new = 'Y' then q := q || ' and (';
new := 'N';
else
q := q || ' or '; end if;
q := q || '(instr(upper(b."JOB"),upper(''Transportation of PCB'')) > 0) and
((instr(upper(b."SET_YES_NO"),''NO'') > 0) or
(instr(upper(b."CRAFTMAN_YES_NO"),''NO'') > 0) and
(instr(upper(b."PROBATION_YES_NO"),''NO'') > 0)) ';
end if;
if :P33_WASTE_PICK_UP = 'YES' then
if new = 'Y' then q := q || ' and (';
new := 'N';
else
q := q || ' or '; end if;
q := q || '(instr(upper(b."JOB"),upper(''Waste Pick-Up'')) > 0) and
((instr(upper(b."SET_YES_NO"),''NO'') > 0) or
(instr(upper(b."CRAFTMAN_YES_NO"),''NO'') > 0) and
(instr(upper(b."PROBATION_YES_NO"),''NO'') > 0)) ';
end if;
-------------------- start OCM
if :P33_GREENFIELD_POLELINE_CONST = 'YES' then
if new = 'Y' then q := q || ' and (';
new := 'N';
else
q := q || ' or '; end if;
q := q || '(instr(upper(b."JOB"),upper(''Greenfield Poleline Construction'')) > 0) and
((instr(upper(b."SET_YES_NO"),''NO'') > 0) or
(instr(upper(b."CRAFTMAN_YES_NO"),''NO'') > 0) and
(instr(upper(b."PROBATION_YES_NO"),''NO'') > 0)) ';
end if;
if :P33_HV_OVERHEAD_MAINTENANCE = 'YES' then
if new = 'Y' then q := q || ' and (';
new := 'N';
else
q := q || ' or '; end if;
q := q || '(instr(upper(b."JOB"),upper(''HV Overhead Maintenance'')) > 0) and
((instr(upper(b."SET_YES_NO"),''NO'') > 0) or
(instr(upper(b."CRAFTMAN_YES_NO"),''NO'') > 0) and
(instr(upper(b."PROBATION_YES_NO"),''NO'') > 0)) ';
end if;
if :P33_INSULATOR_WARNING = 'YES' then
if new = 'Y' then q := q || ' and (';
new := 'N';
else
q := q || ' or '; end if;
q := q || '(instr(upper(b."JOB"),upper(''Insulator Warning'')) > 0) and
((instr(upper(b."SET_YES_NO"),''NO'') > 0) or
(instr(upper(b."CRAFTMAN_YES_NO"),''NO'') > 0) and
(instr(upper(b."PROBATION_YES_NO"),''NO'') > 0)) ';
end if;
if :P33_LV_OVERHEAD_MAINTENANCE = 'YES' then
if new = 'Y' then q := q || ' and (';
new := 'N';
else
q := q || ' or '; end if;
q := q || '(instr(upper(b."JOB"),upper(''LV Overhead Maintenance'')) > 0) and
((instr(upper(b."SET_YES_NO"),''NO'') > 0) or
(instr(upper(b."CRAFTMAN_YES_NO"),''NO'') > 0) and
(instr(upper(b."PROBATION_YES_NO"),''NO'') > 0)) ';
end if;
if :P33_OVERHEAD_INFRARED_SCAN = 'YES' then
if new = 'Y' then q := q || ' and ('; new := 'N';
else
q := q || ' or '; end if;
q := q || '(instr(upper(b."JOB"),upper(''Overhead Infrared Scanning'')) > 0) and
((instr(upper(b."SET_YES_NO"),''NO'') > 0) or
(instr(upper(b."CRAFTMAN_YES_NO"),''NO'') > 0) and
(instr(upper(b."PROBATION_YES_NO"),''NO'') > 0)) ';
end if;
if :P33_POLEHOLES_AND_ANCHORS = 'YES' then
if new = 'Y' then q := q || ' and ('; new := 'N';
else
q := q || ' or '; end if;
q := q || ' (instr(upper(b."JOB"),upper(''Poleholes and Anchors'')) > 0) and
((instr(upper(b."SET_YES_NO"),''NO'') > 0) or
(instr(upper(b."CRAFTMAN_YES_NO"),''NO'') > 0) and
(instr(upper(b."PROBATION_YES_NO"),''NO'') > 0)) ';
end if;
if :P33_POLELINE_INSPECTION = 'YES' then
if new = 'Y' then q := q || ' and( '; new := 'N';
else
q := q || ' or '; end if;
q := q || ' (instr(upper(b."JOB"),upper(''Poleline Inspection'')) > 0) and
((instr(upper(b."SET_YES_NO"),''NO'') > 0) or
(instr(upper(b."CRAFTMAN_YES_NO"),''NO'') > 0) and
(instr(upper(b."PROBATION_YES_NO"),''NO'') > 0)) ';
end if;
if :P33_POLELINE_WORK_TO_35KV = 'YES' then
if new = 'Y' then q := q || ' and ('; new := 'N';
else
q := q || ' or '; end if;
q := q || ' (instr(upper(b."JOB"),upper(''Poleline Work to 35KV'')) > 0) and
((instr(upper(b."SET_YES_NO"),''NO'') > 0) or
(instr(upper(b."CRAFTMAN_YES_NO"),''NO'') > 0) and
(instr(upper(b."PROBATION_YES_NO"),''NO'') > 0)) ';
end if;
if :P33_POLELINE_TO_44KV = 'YES' then
if new = 'Y' then q := q || ' and ('; new := 'N';
else
q := q || ' or '; end if;
q := q || ' (instr(upper(b."JOB"),upper(''Poleline to 44KV'')) > 0) and
((instr(upper(b."SET_YES_NO"),''NO'') > 0) or
(instr(upper(b."CRAFTMAN_YES_NO"),''NO'') > 0) and
(instr(upper(b."PROBATION_YES_NO"),''NO'') > 0)) ';
end if;
if :P33_ROCK_DRILLING = 'YES' then
if new = 'Y' then q := q || ' and ('; new := 'N';
else
q := q || ' or '; end if;
q := q || '(instr(upper(b."JOB"),upper(''Rock Drilling'')) > 0) and
((instr(upper(b."SET_YES_NO"),''NO'') > 0) or
(instr(upper(b."CRAFTMAN_YES_NO"),''NO'') > 0) and
(instr(upper(b."PROBATION_YES_NO"),''NO'') > 0)) ';
end if;
if :P33_TENSION_STRINGING = 'YES' then
if new = 'Y' then q := q || ' and ('; new := 'N';
else
q := q || ' or '; end if;
q := q || ' (instr(upper(b."JOB"),upper(''Tension Stringing'')) > 0) and
((instr(upper(b."SET_YES_NO"),''NO'') > 0) or
(instr(upper(b."CRAFTMAN_YES_NO"),''NO'') > 0) and
(instr(upper(b."PROBATION_YES_NO"),''NO'') > 0)) ';
end if;
if :P33_TREE_TRIMMING_DEEN = 'YES' then
if new = 'Y' then q := q || ' and ('; new := 'N';
else
q := q || ' or '; end if;
q := q || '(instr(upper(b."JOB"),upper(''Tree Trimming (De-Energized)'')) > 0) and
((instr(upper(b."SET_YES_NO"),''NO'') > 0) or
(instr(upper(b."CRAFTMAN_YES_NO"),''NO'') > 0) and
(instr(upper(b."PROBATION_YES_NO"),''NO'') > 0)) ';
end if;
if :P33_TREE_TRIMMING_ENER = 'YES' then
if new = 'Y' then q := q || ' and ('; new := 'N';
else
q := q || ' or '; end if;
q := q || '(instr(upper(b."JOB"),upper(''Tree Trimming (Energized)'')) > 0) and
((instr(upper(b."SET_YES_NO"),''NO'') > 0) or
(instr(upper(b."CRAFTMAN_YES_NO"),''NO'') > 0) and
(instr(upper(b."PROBATION_YES_NO"),''NO'') > 0)) ';
end if;
if :P33_WOOD_POLE_TESTING_DEEN = 'YES' then
if new = 'Y' then q := q || ' and ('; new := 'N';
else
q := q || ' or '; end if;
q := q || '(instr(upper(b."JOB"),upper(''Wood Pole Testing De-Energized'')) > 0) and
((instr(upper(b."SET_YES_NO"),''NO'') > 0) or
(instr(upper(b."CRAFTMAN_YES_NO"),''NO'') > 0) and
(instr(upper(b."PROBATION_YES_NO"),''NO'') > 0)) ';
end if;
if :P33_WOOD_POLE_TESTING_ENER = 'YES' then
if new = 'Y' then q := q || ' and ('; new := 'N';
else
q := q || ' or '; end if;
q := q || '(instr(upper(b."JOB"),upper(''Wood Pole Testing Energized'')) > 0) and
((instr(upper(b."SET_YES_NO"),''NO'') > 0) or
(instr(upper(b."CRAFTMAN_YES_NO"),''NO'') > 0) and
(instr(upper(b."PROBATION_YES_NO"),''NO'') > 0)) ';
end if;
------------------ start UCM
if :P33_CO2_CLEANING = 'YES' then
if new = 'Y' then q := q || ' and ('; new := 'N';
else
q := q || ' or '; end if;
q := q || '(instr(upper(b."JOB"),upper(''CO2 Cleaning'')) > 0) and
((instr(upper(b."SET_YES_NO"),''NO'') > 0) or
(instr(upper(b."CRAFTMAN_YES_NO"),''NO'') > 0) and
(instr(upper(b."PROBATION_YES_NO"),''NO'') > 0)) ';
end if;
if :P33_CABLE_PULLING = 'YES' then
if new = 'Y' then q := q || ' and ('; new := 'N';
else
q := q || ' or '; end if;
q := q || '(instr(upper(b."JOB"),upper(''Cable Pulling'')) > 0) and
((instr(upper(b."SET_YES_NO"),''NO'') > 0) or
(instr(upper(b."CRAFTMAN_YES_NO"),''NO'') > 0) and
(instr(upper(b."PROBATION_YES_NO"),''NO'') > 0)) ';
end if;
if :P33_CABLE_TESTING_DEENERGIZED = 'YES' then
if new = 'Y' then q := q || ' and ('; new := 'N';
else
q := q || ' or '; end if;
q := q || '(instr(upper(b."JOB"),upper(''Cable Testing De-Energized'')) > 0) and
((instr(upper(b."SET_YES_NO"),''NO'') > 0) or
(instr(upper(b."CRAFTMAN_YES_NO"),''NO'') > 0) and
(instr(upper(b."PROBATION_YES_NO"),''NO'') > 0)) ';
end if;
if :P33_CABLE_TESTING_ENERGIZED = 'YES' then
if new = 'Y' then q := q || ' and ('; new := 'N';
else
q := q || ' or '; end if;
q := q || '(instr(upper(b."JOB"),upper(''Cable Testing Energized'')) > 0) and
((instr(upper(b."SET_YES_NO"),''NO'') > 0) or
(instr(upper(b."CRAFTMAN_YES_NO"),''NO'') > 0) and
(instr(upper(b."PROBATION_YES_NO"),''NO'') > 0)) ';
end if;
if :P33_CONC_DUCT_MAN_DEEN = 'YES' then
if new = 'Y' then q := q || ' and ('; new := 'N';
else
q := q || ' or '; end if;
q := q || '(instr(upper(b."JOB"),upper(''Conc. Duct & Manhole (De-Energized)'')) > 0) and
((instr(upper(b."SET_YES_NO"),''NO'') > 0) or
(instr(upper(b."CRAFTMAN_YES_NO"),''NO'') > 0) and
(instr(upper(b."PROBATION_YES_NO"),''NO'') > 0)) ';
end if;
if :P33_CONC_DUCT_MAN_ENER = 'YES' then
if new = 'Y' then q := q || ' and ('; new := 'N';
else
q := q || ' or '; end if;
q := q || '(instr(upper(b."JOB"),upper(''Conc. Duct & Manhole (Energized)'')) > 0) and
((instr(upper(b."SET_YES_NO"),''NO'') > 0) or
(instr(upper(b."CRAFTMAN_YES_NO"),''NO'') > 0) and
(instr(upper(b."PROBATION_YES_NO"),''NO'') > 0)) ';
end if;
if :P33_DIR_BURIED_DUCT_DEEN = 'YES' then
if new = 'Y' then q := q || ' and ('; new := 'N';
else
q := q || ' or '; end if;
q := q || '(instr(upper(b."JOB"),upper(''Direct Buried (De-Energized)'')) > 0) and
((instr(upper(b."SET_YES_NO"),''NO'') > 0) or
(instr(upper(b."CRAFTMAN_YES_NO"),''NO'') > 0) and
(instr(upper(b."PROBATION_YES_NO"),''NO'') > 0)) ';
end if;
if :P33_DIR_BURIED_DUCT_ENER = 'YES' then
if new = 'Y' then q := q || ' and ('; new := 'N';
else
q := q || ' or '; end if;
q := q || '(instr(upper(b."JOB"),upper(''Direct Buried (Energized)'')) > 0) and
((instr(upper(b."SET_YES_NO"),''NO'') > 0) or
(instr(upper(b."CRAFTMAN_YES_NO"),''NO'') > 0) and
(instr(upper(b."PROBATION_YES_NO"),''NO'') > 0)) ';
end if;
if :P33_DIRECTIONAL_BORING_DEEN = 'YES' then
if new = 'Y' then q := q || ' and ('; new := 'N';
else
q := q || ' or '; end if;
q := q || '(instr(upper(b."JOB"),upper(''Directional Boring De-Energized'')) > 0) and
((instr(upper(b."SET_YES_NO"),''NO'') > 0) or
(instr(upper(b."CRAFTMAN_YES_NO"),''NO'') > 0) and
(instr(upper(b."PROBATION_YES_NO"),''NO'') > 0)) ';
end if;
if :P33_DIRECTIONAL_BORING_ENER = 'YES' then
if new = 'Y' then q := q || ' and ('; new := 'N';
else
q := q || ' or '; end if;
q := q || '(instr(upper(b."JOB"),upper(''Directional Boring Energized'')) > 0) and
(instr(upper(b.”SET_YES_NO”),''NO'') > 0) ';
end if;
if :P33_GENERAL_EXCAVATION = 'YES' then
if new = 'Y' then q := q || ' and ('; new := 'N';
else
q := q || ' or '; end if;
q := q || '(instr(upper(b."JOB"),upper(''General Excavation Around Plant'')) > 0) and
(instr(upper(b.”SET_YES_NO”),''NO'') > 0) ';
end if;
if :P33_HV_UG_MAINTENANCE = 'YES' then
if new = 'Y' then q := q || ' and ('; new := 'N';
else
q := q || ' or '; end if;
q := q || '(instr(upper(b."JOB"),upper(''HV Underground Maintenance'')) > 0) and
(instr(upper(b.”SET_YES_NO”),''NO'') > 0) ';
end if;
if :P33_LV_UG_MAINTENANCE = 'YES' then
if new = 'Y' then q := q || ' and ('; new := 'N';
else
q := q || ' or '; end if;
q := q || '(instr(upper(b."JOB"),upper(''LV Underground Maintenance'')) > 0) and
(instr(upper(b.”SET_YES_NO”),''NO'') > 0) ';
end if;
if :P33_MANHOLE_CLEANING_DEEN = 'YES' then
if new = 'Y' then q := q || ' and ('; new := 'N';
else
q := q || ' or '; end if;
q := q || '(instr(upper(b."JOB"),upper(''Manhole Cleaning De-Energized'')) > 0) and
(instr(upper(b.”SET_YES_NO”),''NO'') > 0) ';
end if;
if :P33_MANHOLE_CLEANING_ENER = 'YES' then
if new = 'Y' then q := q || ' and ('; new := 'N';
else
q := q || ' or '; end if;
q := q || '(instr(upper(b."JOB"),upper(''Manhole Cleaning Energized'')) > 0) and
(instr(upper(b.”SET_YES_NO”),''NO'') > 0) ';
end if;
if :P33_MANHOLE_INSPECTION = 'YES' then
if new = 'Y' then q := q || ' and ('; new := 'N';
else
q := q || ' or '; end if;
q := q || '(instr(upper(b."JOB"),upper(''Manhole Inspection'')) > 0) and
(instr(upper(b.”SET_YES_NO”),''NO'') > 0) ';
end if;
if :P33_UG_EQUIPMENT_INSPECTIONS = 'YES' then
if new = 'Y' then q := q || ' and ('; new := 'N';
else
q := q || ' or '; end if;
q := q || '(instr(upper(b."JOB"),upper(''UG Equipment Inspections'')) > 0) and
(instr(upper(b.”SET_YES_NO”),''NO'') > 0) ';
end if;
if :P33_UG_INFRA_RED_SCANNING = 'YES' then
if new = 'Y' then q := q || ' and ('; new := 'N';
else
q := q || ' or '; end if;
q := q || '(instr(upper(b."JOB"),upper(''UG Infra Red Scanning'')) > 0) and
(instr(upper(b.”SET_YES_NO”),''NO'') > 0) ';
end if;
if :P33_UG_CABLE_LOCATES = 'YES' then
if new = 'Y' then q := q || ' and ('; new := 'N';
else
q := q || ' or '; end if;
q := q || '(instr(upper(b."JOB"),upper(''Underground Cable Locates'')) > 0) and
(instr(upper(b.”SET_YES_NO”),''NO'') > 0) ';
end if;
------------------------ start SCM
if :P33_FENCING_AROUND_SUBSTATION = 'YES' then
if new = 'Y' then q := q || ' and ('; new := 'N';
else
q := q || ' or '; end if;
q := q || '(instr(upper(b."JOB"),upper(''Fencing Around Substation'')) > 0) and
(instr(upper(b.”SET_YES_NO”),''NO'') > 0) ';
end if;
if :P33_FENCING_GREENFIELD = 'YES' then
if new = 'Y' then q := q || ' and ('; new := 'N';
else
q := q || ' or '; end if;
q := q || '(instr(upper(b."JOB"),upper(''Fencing Greenfield'')) > 0) and
(instr(upper(b.”SET_YES_NO”),''NO'') > 0) ';
end if;
if :P33_INSPECTION_AND_TESTING = 'YES' then
if new = 'Y' then q := q || ' and ('; new := 'N';
else
q := q || ' or '; end if;
q := q || '(instr(upper(b."JOB"),upper(''Inspection And Testing'')) > 0) and
(instr(upper(b.”SET_YES_NO”),''NO'') > 0) ';
end if;
if :P33_STATION_CIVIL_WORK = 'YES' then
if new = 'Y' then q := q || ' and ('; new := 'N';
else
q := q || ' or '; end if;
q := q || '(instr(upper(b."JOB"),upper(''Station Civil Work'')) > 0) and
(instr(upper(b.”SET_YES_NO”),''NO'') > 0) ';
end if;
if :P33_STATION_CONST_DEENERGIZED = 'YES' then
if new = 'Y' then q := q || ' and ('; new := 'N';
else
q := q || ' or '; end if;
q := q || '(instr(upper(b."JOB"),upper(''Station Construction (De'')) > 0) and
(instr(upper(b.”SET_YES_NO”),''NO'') > 0) ';
end if;
if :P33_STATION_CONST_ENERGIZED = 'YES' then
if new = 'Y' then q := q || ' and ('; new := 'N';
else
q := q || ' or '; end if;
q := q || '(instr(upper(b."JOB"),upper(''Station Construction (E'')) > 0) and
(instr(upper(b.”SET_YES_NO”),''NO'') > 0) ';
end if;
if :P33_STATION_INFRARED_SCANNING = 'YES' then
if new = 'Y' then q := q || ' and ('; new := 'N';
else
q := q || ' or '; end if;
q := q || '(instr(upper(b."JOB"),upper(''Station Infrared Scanning'')) > 0) and
(instr(upper(b.”SET_YES_NO”),''NO'') > 0) ';
end if;
if :P33_STATIONS_ASBESTOS_REMOVAL = 'YES' then
if new = 'Y' then q := q || ' and ('; new := 'N';
else
q := q || ' or '; end if;
q := q || '(instr(upper(b."JOB"),upper(''Stations Asbestos Removal'')) > 0) and
(instr(upper(b."SET_YES_NO"),''NO'') > 0) ';
end if;
if new = 'N' then q := q || ' ) ';
end if;
q := q || ' ) ';
return q;
end;

Book file not reflecting changes in source .indd

I created 2 .indd files. I created a book indb. All is well. I create a .pdf. I make changes to the 2 indd. files. Save to the book again. The changes are not recognized. Seems like I have to create a new book everytime I make changes to the source .indd files? Is this correct? please & thanks.

Sounds like you might be running into problems with your files not saving correctly or something. That would explain both your book not being updated and why when you clicked on one of your recent files it showed you an old version. It won't be anything to do with that opening screen, ticking don't show again is the right thing to do IMO though!
Go to where your files are located, open one up, make a small inconsequential change and close it again saving changes. Open it up again and check that the change has been done. Report back here with any error or warning messages on either open or close. If that works like expected though it must be something else.

The file "Notes" was change with out my permission, how do I recover the erased notes?

The File with my notes in the IPhone (IPad as well) was changed with out me asking, there where some critical notes eliminated from this File, how can I recover this information??

Hide the App store via Restrictions. See:
iOS: Understanding Restrictions

I am trying to use the brightness adjustment on a grayscale photoshop CS6 file. The preview shows the adjustment working and changes the brightness, but when you click to apply the change, it does not apply the adjustment. I have run into this problem b

I am trying to use the brightness adjustment on a grayscale photoshop CS6 file. The preview shows the adjustment working and changes the brightness, but when you click to apply the change, it does not apply the adjustment. I have run into this problem before, although rarely, with some other files over the years and with earlier versions of CS. I would like to know how to overcome this problem?

Make sure you are viewing your image at 100%. At smaller views, pixels and layers and the way they interact are approximate interpolations and won't show you the actual pixel-for-pixel changes.

Deploying Office 2013 x64 - feature installation state msp not applying

So I created my MSP with setup.exe /admin and configured a number of options in it. I saved the msp as "1Office64bit.msp" and saved it into the Updates folder. I also have a service pack for Office 2013 in the Updates folder.
I created an SCCM application to deploy office. My deployment installation program looks like this - setup.exe /config proplus.ww\config.xml
During my SCCM Build and Capture task sequence Office 2013 installs, the updates apply, and all of the settings in the MSP apply except for one. I specificed in the msp feature installation states to NOT install the Outlook feature, but it's not working?
Also - as a test after the task sequence completes, I run "msiexec /p \\pathtomsp\1Office64bit.msp - and it removes Office like it should. But I don't know why this doesn't happen during the initial installation?

You should use either a config xml file or an MSP during the installation of Office (2013). In your current command line it looks like you're trying to use both. As you saved the MSP file in the updates folder, simply specifying setup.exe should be enough
to start the installation and let it use the MSP.
My Blog: http://www.petervanderwoude.nl/
Follow me on twitter: pvanderwoude
So I tried just running setup.exe and it doesn't seem to be working either. I verified in the ccm appenforce.log that the install command was just setup.exe (so the change made it to the client) but Outlook was still installed.
I'm going to try changing it to setup.exe /adminfile to see if that works.

Unable to modify certain settings with Office 2010 OCT generated msp file

Hi, I'm trying to modify existing Outlook installations by using an msp file generated from OCT. I have multiple settings in it, one of which actually works (changing default format to Rich Text). However, when I get down to the Tracking section,
I'm trying to set default behavior for read receipts, it doesn't work.
On a fresh install, the default behavior is coming up as Ask each time, while I want it to automatically send the response when a read receipt requested.
Nothing happens when using the file. I've tried double clicking, using msiexec /p file.msp, setup /adminfile \\location\updates\file.msp (I tried a fresh install using the msp and still no joy; it set the default format to Rich Text, but not the read
receipt response).
I'm at a loss here. Any ideas? Let me know what additional info might be needed.
Yes, I know how to use group policy but we're looking to reduce our GPO footprint in this case.
Thanks

Hello,
I have tried the same thing with OCT in my setups, and got the same result that set default behavior for read receipts doesn’t actually work.
It doesn’t work for me even I use group policy to change it. I also tried changing related register key directly (software\policies\microsoft\office\14.0\outlook\options\flagging) in Registry Edit and that make no difference. This seems to be a known issue
currently, no solution on Outlook client without VBA code, if you are familiar with coding, the following VBA code might be help.
Sub AddReadReceiptRequest()
Dim objApp As Outlook.Application
Dim objInsp As Outlook.Inspector
Dim objItem As MailItem ' Object
' get the currently open item and make sure
' it's a mail message
Set objApp = CreateObject("Outlook.Application")
Set objInsp = objApp.ActiveInspector
If Not objInsp Is Nothing Then
Set objItem = objInsp.CurrentItem
If objItem.Class = olMail Then
' make sure it's unsent
If objItem.Sent = False Then
' ask for read receipt
objItem.ReadReceiptRequested = True
End If
End If
End If
Set objApp = Nothing
Set objInsp = Nothing
Set objItem = Nothing
End Sub
(Programming/Code related questions should really be posed in one of the following forums Outlook for Developers
http://social.msdn.microsoft.com/Forums/en-US/outlookdev )
However, if you are an Exchange admin, as an alternate plan, you can use Set-MailboxMessageConfiguration to achieve the same effect for workaround. Please try with editing below parameters:
For more details about Set-MailboxMessageConfiguration, we can check this article:
http://technet.microsoft.com/en-us/library/dd638117(v=exchg.150).aspx .
Tony Chen
TechNet Community Support

Applying changes to report queries results in HTML 404 page not found

Hello,
When I try to change report queries (especially by using multiple queries) I frequently get HTML 404 page not found.
This happens when I click Apply Changes after I edited the query, but also quite often just when I try to confirm the changes in the query.
When I logout and then login again, after a few tries, I finally succeed.
The problem of HTML 404 page not found appears quite a few times, even when I try to delete a query or to open one for editing
Can anyone help me out here? It is really frustrating any development of reports with APEX
I'm using APEX version 3.1.2.00.02 with Oracle XE

Where do you publish your site and how do you upload the files?
What is the URL of your site?

Photoshop randomly not applying Lightroom-generated .xml files

Hi there. I have a problem with Photoshop or Lightroom. This has happened to me before, but it's just somehow resolved itself previously. This time it won't.
I'm using LR 2.7 and PS CS4 and CS5. I've edited a bunch of Nikon RAW files (NEF) in LR and then saved the metadata to the files, but when I open the images in Photoshop the edits are not applied. It's like I haven't made any changes at all to the RAW files. For some reason this only happens to a few images, seemingly at random. I can't tell which ones without opening them all individually in Photoshop, though.
I have a script that I run in Photoshop that creates PSDs from my edited RAW files and applies some quick Photoshop adjustments as well, so exporting the files from LR isn't a solution for me.
I'm using a Mac Pro with Leopard 10.5.8.
Any ideas? Thanks.

In the normal situation, LR needs to see a PS installed for it to detect the Edit In PS option is possible, so if you uninstall both, then install PS, first, then LR. Of course with this release there may be some hiccup that requires installing either one or the other, again, but if you've uninstalled both and are reinstalling both, then install PS, first.

Acrobat 8 Standard will not apply transform file during installation

I also posted this in the Acrobat form before I noticed this Enterprise Installation forum.
I am using the Adobe 8 customization wizard to create an MST file for Acrobat 8 Standard. The MST file disables automatic updates, Acrobat Connect and several other items, however, when I run the install with the transform, none of the changes in the MST are applied. I am using the following command inside a batch file:
msiexec /i acrostan.msi TRANSFORMS=ACROSTAN.MST /qb
I am using the Standard files downloaded from Adobe's secure site, which were then unzipped and used with the customization wizard. I did not create an administrative installation point, as that earlier attempt also resulted in not applying the transform.
I believe the transform file is correct, as I found the above command will work the second time I try to install Standard, but does not work the first time Standard is installed using the MST file.

can you post your transform somewhere? take out the serial number before posting. You might also want to create an install log.

Changes are not applying to the reports

hi all
i have moved the RPD and catalog file to UAT there i got few changes
i did the changes in DVE and again i moved the changed reports to UAT ,but the report changes are not applied in UAT
so i again i copied same RPD and catalog to UAT now it is working fine,
why the changes are not applied to the reports that i have moved to UAT
is it mandatory to move RPD and catalog to the other environment ??
Thanks

Hi,
if you change even the filters and column names you cant modify only reports and place them in UAT,if you want to cnahge that way there is a tool CAF follow this link how to do that process
http://debaatobiee.wordpress.com/category/obiee/setup-and-environment/
If not you need to deploy RPD and catalog into UAT.
By,
KK

Redo log files are not applying to standby database

Hi everyone!!
I have created standby database on same server ( windows XP) and using oracle 11g . I want to synchronize my standby database with primary database . So I tried to apply redo logs from primary to standby database as follow .
My standby database is open and Primary database is not started (instance not started) because only one database can run in Exclusive Mode as DB_NAME is same for both database. I run the following command on the standby database.
SQL> ALTER DATABASE RECOVER MANAGED STANDBY DATABASE DISCONNECT FROM SESSION;
It returns "Database altered" . But when I checked the last archive log on primary database, its sequence is 189 while on standby database it is 177. That mean archived redo logs are not applied on standby database.
The tnsnames.ora file contains entry for both service primary & standby database and same service has been used to transmit and receive redo logs.
1. How to resolve this issue ?
2.Is it compulsory to have Primary database open ?
3. I have created standby control file by using command
SQL> ALTER DATABASE CREATE STANDBY CONTROLFILE AS ‘D:\APP\ORACLE\ORADATA\TESTCAT\CONTROLFILE\CONTROL_STAND1.CTL‘;
So database name in the standby control file is same as primary database name (PRIM). And hence init.ora file of standby database also contains DB_NAME = 'PRIM' parameter. I can't change it because it returns error of mismatch database name on startup. Should I have different database name for both or existing one is correct ?
Can anybody help me to come out from this stuck ?
Thanks & Regards
Tushar Lapani

Thank you Girish. It solved my redo apply problem. I set log_archive_dest parameter again and then I checked archive redo log sequence number. It was same for both primary and standby database. But still table on standby database is not being refresh.
I did following scenario.
1. Inserted 200000 rows in emp table of Scott user on Primary database and commit changes.
2. Then I synchronized standby database by using Alter database command. And I also verify that archive log sequence number is same for both database. It mean archived logs from primary database has been applied to standby database.
3. But when I count number of rows in emp table of scott user on standby database, it returns only 14 rows even of redo log has been applied.
So my question is why changes made to primary database is not reflected on standby database although redo logs has been applied ?
Thanks

OCT MSP File Not Applying Changes

Similar Messages

Maybe you are looking for