Octo 3.2ghz with 8800GT with dual 30s - Incredibly slow graphics?

I just upgraded from an octo 3.0ghz ati1900 to the new 3.2ghz early 2008 model with an 8800gt video card with dual 30" cinema displays. This should be the dream rig, but under leopard 10.5.2 with graphics update, the UI is choppy and slow. I never had this problem on my old machine with the radeon, and I can't believe that this machine with it's better video card would perform worse.
I just ran xbench and the graphics portion of the results are as follows:
Quarts Graphics Test 68.19
OpenGL Grpahics test 208.64
User Interface Test 8.97
8.97!!! Surely this can't be right??? Anyone else having this problem? Do I have a dud of a card?

We've been scratching our heads and figure they just haven't had any time at all to get a decent driver that really is written for 10.5.2 and 8800 yet.
I remember waiting for some decent drivers and how long it took ATI to gets its driver act together.
Reminds me of the complaints against Nvidia for Vista and how their 12/07 drivers helped. At this point, it seems the Radeon drivers are slightly better, but the Graphics 1.0 update has some good/excellent, and some not so good side effects.
+I'm on the side lines, sitting out this particular game!+

Similar Messages

Odd shadowing effects in XFCE with dual monitors and intel graphics

Linux fowie-desktop 2.6.34-ARCH #1 SMP PREEMPT Mon Jul 5 21:03:38 UTC 2010 i686 Intel(R) Core(TM)2 CPU T7400 @ 2.16GHz GenuineIntel GNU/Linux
lspci shows:
00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub (rev 03)
00:02.0 VGA compatible controller: Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller (rev 03)
00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (rev 03)
not using an xorg.conf
rc.conf (snippets)
LOCALE="en_US.UTF-8"
HARDWARECLOCK="UTC"
TIMEZONE="America/Denver"
KEYMAP="us"
CONSOLEFONT=
CONSOLEMAP=
USECOLOR="yes"
MOD_AUTOLOAD="yes"
#MOD_BLACKLIST=() #deprecated
MODULES=(!usblp vboxdrv !saa7134 saa7134-dvb)
DAEMONS=(syslog-ng dbus hal @network @netfs @crond @alsa @cups @sensors @samba @ddclient @sshd @httpd @mysqld @smartd)
and my .xinitrc:
/usr/bin/xrandr --output VGA1 --left-of DVI1 --output DVI1 --mode 1920x1080
exec ck-launch-session startxfce4
Xorg.0.log at http://pastebin.ca/1925313
If I use the xf86-video-intel driver from extra, the xrandr command to do dual-outputs fails and I get both monitors showing the same desktop (mirrored mode). I switched to use AUR's xf86-video-intel-git (reading the forums it said this would fix the dual-monitor issue until extra moves to 2.12.0-2) and I do get the dual monitors working propery with the xrandr command, but I'm experiencing wierd effects. For every unminimized window on the desktop, if I put another window in front, the shadow of the window below stays on top of the window containing the focus. Hard to explain, so I'll use a photo:
That's what it looks like with xf89-video-intel-git, libdrm-git, dri-git, and anything else git and intel graphics related I can find. Any ideas what's wrong, or what I would even call this problem so I can look around and see if anyone else is having the same issues?
Last edited by fowie (2010-08-25 20:21:53)

Ok, I went into the XFCE4 setting manager and opened the "Window Manager Tweaks" module, Under "Compositor" if I disable display compositing the shadowing effect is gone, making the display much more usable (thanks!). But now compositing does not work. Guess I'll go report this to XFCE, or is the XFCE compositing manager handled by someone else?
Last edited by fowie (2010-08-25 23:11:54)

Trouble with Neo4 Platnum and AMD X2 with dual channel memory

I just installed an X2 3800+ in my Neo4 Platnum board. The board had a 3500 in it and ran fine. When I installed the X2, the machine will no longer POST if the memory is in the dual channel mode. I flashed to the latest BIOS (1.8) and it still does not work. I am using 2 Corsair XMS 2-2-2-5 Dimms each at 512MB. The PC POSTs fine if I place both modules in the Green slots. It does not work with 1 in green and 1 in purple (with either Dimms1-2 or 3-4). Has anyone else seen this?

Todd,
Your last post help me understand your situation a bit better. Here are some questions for you:
1- On your old system did these memory sticks work fine has a dual channel pair? Were these 2 memory sticks bought has a dual channel rated matched pair?
2- In your own words give me your definition of POST?
3- In your own words give me your exact detailed rendition of what happens when you try to post with dual setup. (How far do you get? Where does it hang up?)
4- Can you access your BIOS if booting with only one memory stick? If so, this is only for testing purposes, set your memory as 2.5,3,3,8, and 2T and add 0.05 volts to both your CPU and memory recommended voltages. Save, exit, and then shut down your system. Re-install the second stick of RAM in a proper dual channel slot. Re-boot and see what happens. If successful posting and booting in dual channel with this BIOS config go back to your BIOS and tighten your board and memory timings one at a time until you ID the perfect BIOS config for your CPU and RAM. Do the same with your CPU & RAM voltages.
AMD CPUs encompass their own memory control devices. There might just be enough variance between your older & newer AMD chips to reject dual configuration. If this is the case you may be able to correct it by using step for above. If this does not work, you sould borrow some suitable and proven dual channel memory sticks from a friend to see if the will work in your rig as dual channel?
Just keep on trucking & you'll solve it

Is it possible to connect my mid 2010 Macbook Pro with my 21.5" iMac 11,2 so that I can work with dual screens?

Is it possible to connect my mid 2010 Macbook Pro with my 21.5" iMac 11,2 so that I can work with dual screens?

try xxx - may work
_may_ work.

Dual-DMVPN Design with Dual Hubs on a single router ??

Hi All,
In DMVPN, in Dual-DMVPN Design with Dual Hubs , can a single router perform the role of dual hubs.
The router has two different internet links. It is intended that when one link goes down, spokes shud connect to the same router onto the other active internet connection. Is this possible ?

Since no one has answered yet, I'll give you the practical answer.
You'll have issues with IPSec and static routing. "DMVPN" itself probably wouldn't have an issue, but it would depend on IPSec and routing to work.
It is easier, by far, to put in a second router. And when you factor in your time to try to make it work (and it may not work), the second router is less expensive.
Rob

Use of business partner functionality in combination with dual control

Is there a generally agreed upon procedure to use the business partner functionality in combination with dual control? The problem is that when you block a business partner, the customer/ vendor master data aren't blocked automatically. You can then still use them in transactions, which leads to problems.
So is there a way to make this work or a procedure to do this?
Niels Vanwingh

Thanks Masa,
I did notice the 'Add external supplier from' in create supplier or bidder option. However there is a small catch and your experience may help.
Let me explain the requirement and scenario here in SRM 7.
We are implementing the Registration of Supplier scenario; both ROS and SRM are in same client. When a potential supplier registers themselves in the registration system, a BP number is created (an Internal number range is defined for this). After accepting the potential supplier in pre-select screen the purchaser has two options to transfer the potential supplier from the ROS system to SRM
Option 1: He can select the accepted potential supplier from the supplier directory option and transfer the business partner to SRM. In this case the business partner number of the potential supplier is retained in SRM and a business partner with supplier and bidder tag is created. However the purchaser does not have any option to select which type of business partner he would like to create like supplier or bidder.
Option 2: Purchase can go to create supplier or bidder option and choose the u2018Add external supplier formu2019 from the ROS system and create the business partner. The ROS business partner details are copied to the create supplier screen, but the purchaser have to provide an external business partner number for the supplier. This is because we have defined external number range for business partner for the vendors that are replicated from ERP to SRM.
Objective is the ROS business partner should be retained in SRM with option to create as supplier and bidder and then manually create ERP supplier with same SRM BP number and map against SRM supplier.
Is there any way we can achieve this?
In SRM 5.5 with Manage business partner functionality we could achieve as system give us the option which business partner type we would like to create as well as retains the ROS BP number in SRM.
Regards
Sandeep

New IMac 27"with dual internal hard drives

How do I manage Data on my new IMac 27"with dual internal hard drives? I have just migrated my data to my new computer. Since I've done it from a TM backup, it all went to the Analog HD. Ressearching online I've figured I could re-run Migrating assistant and replace different data between the SSD and the Analog. My problem now is: I want to keep my Music Library (iTunes), my Aperture Library and my documents on the analog, and use the SSD for System, Users and Apps. Aperture, is easy, because both Aperture and iPhoto can find their way, bt iTunes and My documents are a issue. Can Anyone help me?

Install OS X on the SSD:
Install or Reinstall Lion/Mountain Lion from Scratch
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Erase the hard drive:
1. Select Disk Utility from the main menu and click on the Continue button.
2. After DU loads select your SSD volume (usually Macintosh HD) from the left side list. Click on
the Erase tab in the DU main window.
3. Set the format type to Mac OS Extended (Journaled.) Optionally, click on the Security button and set the Zero
Data option to one-pass. Click on the Erase button and wait until the process has completed.
4. Quit DU and return to the main menu.
Reinstall Lion: Select Reinstall Lion/Mountain Lion and click on the Install button. Be sure to change the target disk to your SSD.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
After you boot from the SSD open Users & Groups preferences. Click on the lock and authenticate. CTRL- or RIGHT-click on the user account and select Advanced Options. You will see a Home Dir: field with a Browse button on the right. Click on the button. Navigate to the HDD's Users folder. Select your account folder then click on the Open/Choose button. You must restart immediately.
Upon the restart your SSD system will now be using your actual Home folder located on the HDD. You can then go about installing your applications or copying them from the HDD to the Applications folder on the SSD (and also from the Utilities folder on the HDD to the one on the SSD.) You will likely need to do some transfers of the Applications Support and Preferences folders found in the main Library folder.

Can't get windows 8.1 with dual boot for fedora (linux) . system is UEFI .

Can't get windows 8.1 with dual boot for fedora (linux) . system is UEFI .

Hi,
Any update here?
We may seek help at Fedora forum as Milos suggested, if convenient we could share the related thread link here for reference.
In addition, please also check the information in the similar thread:
Dual Boot Windows 8 and Linux?
Best regards
Michael Shao
TechNet Community Support

Receiving multiple files with dual extension using file adapter

Hi,
The scenario where I am implementing requires multiple files of different names to be picked(ABC.txt) and dropped at destination(ABC.txt.pgp) up by my File Sender and Receiver adapters. Any idea on about how the configuration for receiving multiple files with dual extension for receiver adapter is to be done?
Note:- currently, The scenario is working fine without dual extension. i.e Its picking all files which starts with ABC and creating at destination as it is. even I configured as ABC.txt.pgp, but its not creating the second extension.
Thanks in Advance
Manmadha

Hi,
Try to concatenate '.pgp ' to the source file name to create the target file name for the receiver file adapter, by accessing the Adapter Specific Attributes using Java user defined function. This might work.
Reference links:
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/43/03612cdecc6e76e10000000a422035/frameset.htm">SAP Help - Accessing Adapter Specific Attributes</a>
<a href="/people/michal.krawczyk2/blog/2005/11/10/xi-the-same-filename-from-a-sender-to-a-receiver-file-adapter--sp14 - XI: The same filename from a sender to a receiver file adapter - SP14</a>
Regards,
S.Santhosh Kumar

How to use Real time execution trace toolkit with Dual-core processor??

hi there
the situation as follows:
i have a computer (PC and Laptop) types with Dual-core processors, and am trying to do simulation using Multi-core technology and based on different simulation scenarios...starting from sequantial processing,.......Piple lining processing strategy. so that i can differentiate the time delay between those types of processing based on (Using 1 processor then dual-core processor Computers)
my question is: As i read through Ni's white papers i saw many notes refer to Real-time execution trace toolkit to investigate the (processing-time , etc) of multi-core processors in processing diffenent algorithms. My algorithms are to be run on 1 computer with dual-core processor BUT, not in real time environments, that is ( No hardware to be connected to my pc) only algorithms running on my pc....
So, is it possible to use Real time execution trace toolkit or anyother tools in LabVIEW to show processing-delays and/or anyother timing critical issues without using my application for real- time hardware.???
in other words: how to use Real time execution trace toolkit in non-hardware and/or real-time scenarios???
please help me in this.
Any suggestion, comments, feedback.....is absolutely highly appreciated
thanks a lot in advance
Labview Lover

Hey,
The Realtime Execution Trace Toolkit only works for NI RT Targets.
But you can use the Desktop Execution Trace Toolkit, just search for it under ni.com.
Christian

H67MA-E45 doesn't start with dual memory channel

I have just bought an H67MA-E45 motherboard and a brand new intel i5-2300 processor.
The pc works fine with a DDR3 1333 memory module on slot DIMM1 (as suggested in the manual),
but does not seem to work with dual memory channel at all.
When I install two same memory modules on DIMM1 and DIMM3 (dual channel configuration), I get the following problem: When I power on the computer, it turns on and instantly turns off. Then it powers on again on its own, but does nothing else. I get no beep error codes and the display doesn't show anything.
I use he on-board display adapter and I have only a sata II hard disk connected, nothing else.
Any suggestion what the problem might be?
Is there a way to check if there is a problem with the second memory channel?
PC details
Intel(R) Core(TM) I5-2300 CPU@280 GHz
MSI H67MA-E45 (ms-7678, Lga1155), Click BIOS, E7678IMS V1.2
KINGSTON KVR1333D3N9K2/4G DDR3 4GB (2X2GB) PC10666 1333MHZ
Intel HD Graphics (on board display adapter)
Seagate Baracuda 7200.9 ST3160811AS 160 GB SATA 2.0
Windows 7 Ultimate 32 bit
FSP AX500-A Blue Storm, +3.3V~30 A +5~28A +12~15A

My computer is now working only on one channel memory.
Every time I power the computer on, I get three short beeps, the third one is of slightly different tone. However, the manual does not have the beep codes written down, nor can I find them somewhere for the EFI BIOS (E7678IMS V1.2). Is there any link for the beep codes?
I tried mounting a single memory slot (KINGSTON KVR1333D3N9K2/2G DDR3 (1X2GB) PC10666 1333MHZ ) on DIMM 3 slot, for the second channel to work on its own. When I powered the computer on, I got the same problem, as if both slots DIMM 1 and DIMM 3 were populated. The mainboard turned on (without any beep code or display on screen) only to instantly turn off. Every while (about every four seconds) it tries to power on again on its own, without any intervention, but instantly turn off again. It may manage to stay turned on at one of the following iterations, without giving any beep code, displaying or loading anything.

Looking for dual wireless rechargeable headphone system with dual docks

I'm looking for a pretty specific product, and was wondering if anyone knows of a product that'll fit the bill.
I want a wireless dual headphone system with a charging dock for each headset. Transmitter should accept line level signal from dual RCA plugs. I'd prefer a 900mhz transmitter, but IR is acceptable. Either the system should come with two headsets or it should be a system with a transmitter/headset with the option to add a charging dock and an additional heaset.
My old system was a Sony which is on its last legs, and I found a replacement from another manufacturer with dual headsets but it lacks charging docks - you have to plug the heaset into the transmitter and both heasets can't be charged at once. Also, the manufacturer says not to charge a headset for more than 24 hours or you can damage the battery.
Anyone know if Sony or someone else makes what I want?
Solved!
Go to Solution.

Hi Verne,
Sony does not have manufacture dual Wireless Headphones. You can perform an Internet search and check for any third party dual headphones.
If my post answers your question, please mark it as an "Accepted Solution."

How to replace Nexus5596 with dual-homing N2K

What is the correct process to replace a FEX parent switch with dual-homing fex?
Traffic should not be interrupted.

Hi
Do you have VPC between Parent Switches & are you running VPC on dual homed FEX fabric ports. ?
If yes Below is the procedure,
1) boot the replacement switch without VPC, peer-links & FEX ports connected to it.
2) Make sure it has same Software version matches with the peer switch.
3) enable Pre-Provisioning for slots with appropriate FEX model.
, here find the guide:
http://www.cisco.com/en/US/partner/docs/switches/datacenter/nexus5000/sw/system_management/521_n1_1/b_5k_System_Mgmt_Config_521N11_chapter_0100.html#task_05BB53AD7AFB49CF9A8E4A5C6C37CB38
So, on the replacement switch you will pre-provision the Fabric Extender and configure the ports so it will be ready when you add the module to the RMA SW.
Please make sure you put the appropriate FEX model on the provision slot, otherwise, when connected it will not come Online
Example, FEX 110:
N5K(config)# slot 110
N5K(config-slot)#provision model N2K-C2248T
4) Now keep all ports at Shut down state Then Configure Entire switch that includes FEX host ports, FEX Fabric Ports & VPC peer-link, VPC Domain Configuration.
keep FEX host ports in shut state.
5) keep VPC Role priority on existing switch lower than , new switch
6) Connect Peer-link ports to Peer switch & wait till VPC Comes up-
7) Then connect Fabric ports from FEX to the pre-configured ports on replacement switch
After it comes online Unshut FEX host ports.
I got similar steps here as well
http://www.cisco.com/en/US/docs/switches/datacenter/nexus5000/sw/operations/n5k_vpc_ops.html#wp425197
NOTE: I followed same process however, few ping drops were seen....arnd ( 5- 6 ping loss) only on few hosts...
Mazhar

Problem with dual currency when working with AMEX and VISA

Hi all,
We are in process of implementing SAP travel on demand with integration of AMEX and VISA corporate cards. Paymentric was in charge of our configuration and the information is comming to our system now.
As per our set up, the statements are being procesed with errors, due the currency we are receiving the charges is USD instead of country home currency. Example -> Argentinian employee travel to Brazil, and paid with BRL currency. We are receiving the statements in USD instead of BRL (There is a validation in the tool which cannot process statements in other than local currency)
I spoke with AMEX and VISA representatives, and both says that they work with dual currency model, so changing the currency in the statements is not a possibility.
Are we missing something in the config? I was reading information and discover that other countries like China are having same issue.
Thanks for your help,
Hernán

Hi Hernán,
credit card statements usually contain two currencies:
1. 1. Local Currency: if the Argentinian employee travels to Brazil and buys something there, the local currency would be BRL
2. 2. Billed Currency: this is the currency in which the credit card is billed (according to the credit card setup). Each transaction is converted to the billed currency in case of foreign transactions.
Cloud for Travel and Expenses knows for each employee exactly one home currency. An expense report is always processed with home currency.
Up to release 1502 it is not possible to import credit card transactions if the credit card billed currency does no match the employee’s home currency (there is no restriction to the local currency).
As of release 1505 this is possible, but it has to be activated in Business Configuration:
Travel and Expenses -> Expense Reimbursement -> Expense Input Channels -> Group: Credit Card -> Do you want to import credit card transactions with a credit card currency that differs from the home currency of the employee?
In addition, you must use the new posting interface "SAP ERP Financials Using IDoc (with extensibility)". If you detect settlement deviations or differences on the reconciliation or credit card account (split payment) due to the currency exchange rates in your financial system, you can correct this situation by implementing BAdIs in the ERP system.
Hope this helps.
Best regards,
Ralph

Use of addImageTheme method with dual table in query

Is it possible to specify a query using the dual table that specifies a BLOB type? I'm trying to specify a image theme dynamically using the bean API. My image is a JPEG.

Hi Jen,
if you create a table with a BLOB to store the image, plus a geometry column with the image MBR, then you can easily build the dynamic image theme using the API. Your SQL on the image theme would be something like: select mbr, image from image_table.
I'm not sure if there is a direct function at the SQL level that takes an image file and generates a BLOB. Maybe someone has done something similar. If this function exists, then you may be able to create an image theme issuing a SQL with dual table.
Joao

Octo 3.2ghz with 8800GT with dual 30s - Incredibly slow graphics?

Similar Messages

Maybe you are looking for