October 10 PRU & November 10 PRU
Hi Guys,
I am looking for details of the products contained in the PRUs.
All PRUs previous to October 10 have an additional file available, in the format 10.x.sep10Prod_Lists.zip, which I believe is what I am looking for. Where is this file for October 10 and November 10 PRUs?
Thanks in advance,
DM
Dmc0202,
the guy I asked passed the message on to someoen else, I don't think
we've seen an update - I've pinged the person concerned...
Shaun Pond
Similar Messages
-
I need a copy of the receipt for my purchase from October of 2013
I have purchased a Google Nexus 7 32GB for $249.99 + accidental coverage for $49.99 from Best Buy in Fullerton CA around October or November. The total including the tax came out to be $322.98. I need the receipt for it. I actually have the receipt but the numbers have faded and I am not able to read it clearly. From what I can read, thec date of the original purchase was 1?/24/13 18:14. I do not remember if it was 10 or 11... My guess is 10/24/13 because the eight digit number following the date and time is 01024939.
I will be grateful. Thank youHello kppeternoh,
Thanks for registering on the forum! I hope you had a stellar experience while visiting our Fullerton store and it looks like you left with an excellent tablet. I’m a huge Android fan, so I greatly approve of your choice in the Nexus 7.
Between the information you provided, and your email address on file for the forum, I was able to locate your receipt. I have requested the receipt be emailed to you at your email address on file, and you should receive it within a few hours.
If you have any other questions, don’t hesitate to let us know!
Brian|Senior Social Media Specialist | Best Buy® Corporate
Private Message -
Lost prepaid autopay phone in october .........
september I paid the $50.00 amonth unlimited on my prepaid phone..........in october I lost the phone and called the customer service number......I told the rep that I had lost the phone and did not want to continue with autopay until I found it.......she said to not pay the october or november bill and the autopay would automatically be cancelled........so that is what i did.......made sure there was no money on the prepaid debit card for the october and november payment......thought everything was fine until this morning when I put some money on the debit card for car insurance and then noticed later that verizon took $55.41 for the december service, in which it was for service on a phone that was lost in october.......I called the 888 number and told them what was going on and they said there was no record of the conversation in october but they did notice that the october and november payment did not go through but the december payment went through.......I told I had just put money on the card to pay something else and why did the autopay not stop since there was no payment made for two months. was informed that autopay will keeping trying every month until someone stops it........i told them what the lady told me back in october when i reported the phone lost and then was told sorry but that is not true and that I needed to buy another phone and have it transfferred to it......I then contacted the local office and they gave me a 877 number called them and got the same thing.......so now I have contacted the local news station to see if I can get any help there. I know that $55.41 is not much to such a big company but it is a lot to me because I am a single mom of two boys of which one is in college and I work fulltime while attending college full time..........every penny has a place around here........I have always bragged to everyone about verizon but not any more.......Therefore,,,,money has to be taken from my boys christmas (which was only $100.00 to begin with) to finish the car insurance because someone at verizon did not do their job in the first place..........
Thank you....Verizon has corrected the problem after I found the right number and person to contact. The Customer Care Department was awesome at resolving this issue. Thank you so much Customer Care Department. Have a very merry Christmas.
-
Adobe Photoshop, HOW CAN I STOP Adobe from CHARGING MY CREDIT CARD !!!!!!!!!!!!!!!!!!!!!!!
CLAIM AGAINT ADOBE FOR UNAUTHORIZED CHARGES
JANUARY 2012 TO FEBRUARY 2015
Adobe Photoshop CS5.1 WILL NOT STOP CHARGING MY CREDIT CARD !!!!!!!!!!!!!!!!!!!!!!!
Adobe's system is set up to make it VERY difficult to stop charging your credit card AFTER you cancel, CALLED and CANCELED, call and CANCELED AGAIN
Our annual accountant caught that the charges were still being charged. Our book keeper (my spouse) thought that Abobe was one of our systems charges and it did not raise a flag until October 2014. We canceled at the end of MAY 2013 when our off site designer at their own office said that illustrator was better for him for the work we need and we no longer needed to use PSD . Month to Month means you can cancel when you want. The agreement is very clear that we can cancel PRIOR TO THE RENEWAL DATE. ADOBE PS is a great program, we love it, we DONT love being charged for 27 extra unauthorized months 29.99 = 809.73 !!!!!!!!!!!!!!!!. Adobe can see the service has NOT been accessed or has not 1 minuet of use time on any dat for 21 months. When they did not cancel I had a 1 hour 25 minuet RECORDED conversation to cancel the service in November of 2013. I was assured this time it was canceled and refunded. We trusted the manager we spoke and did not see the charges for Our accountant whom filed our personal taxes first week of October 2014 for Tax Year 2013 discovered the charges were still there.
We have called in October 2014, November 2014, December 2014, January 2014. Our company attorney said to dispute all charges from first date of cancelation.
A friend with the SAME issue of Adobe charging after canceling recommended this forum. ADOBE ARE YOU READING THIS ???
CASE # 210663517
membership order number (AD007677235)
CASE HISTORY SINCE JANUARY 31TH 2012
1) I ordered ONE Month to Month January 4th 2012, got a confirmation that it was month to month but they said it was for ONE DARN year. I fought for weeks to over turn that. We only need the program for a few hours every 7 to 16 months. We cancel the minuet we are done using it.
We were over charged 9 MONTHS at 29.99 they reimbursed 2 months.
SEE CORRESPONDENCE FROM ADOBE BELOW
Adobe Case Update
1/31/12
Your Adobe ID: PRIVATE NAME @GMAIL.COM
Your Case Number: 0207444190
Hello Gene,
We've reviewed your case and we really apologize for the inconvenience and for the past experience that you had, we tried contacting you to inform that we've successfully gave you free 1 month subscription but you were not available at that time.
Please call us back to confirm you got this message and also to confirm at your end that we have given you credit for a month for the subscription that you have.
Thanks & Regards,
Adobe Support
This email is in response to support case #0207444190 submitted by Gene K.
To respond to this update or review your case history, log in to the Adobe Support Portal online and look for your case number in the "recent activity" section. Should you need to send us additional information, you can do so by opening the case and submitting your update.
If you have difficulties logging in, consult the Adobe ID and Membership FAQ.
Thank you,
Adobe Customer Care
2) WE CANCELED MULTIPLE TIMES IN 2012, BUT WERE CHARGED EVERY MONTH. WE USED THE SERVICE DURING 2 MONTHS OF THE YEAR AND WERE REIMBURSED 2 MONTHS Jan and Feb but we used it again in July 2012 for 2 days.
2012 WE WERE CHARGED WITHOUT AUTHORIZATION AFTER CANCELATION 9 MONTHS @ 29.99 = 269.91
3) FEBRUARY 4TH 2013 TO OUR NEXT USE APRIL 26TH 2013 WE WERE NOT CHARGED we gained some confidence in the system.
4) ORDERED ONE MONTH TO MONTH ON APRIL 26TH 2013
5) CANCELED ON APRIL 28TH 2013
6) CALLED TO CANCEL AGAIN AFTER CONTINUED TO CHARGE MY COMPANY ACCOUNT until I lost my Company Credit card on a plane to my sisters funeral on the east coast. May 28th 2013 to June 26th 2014
7) OVER CHARGED BY 13 MONTHS @ 29.99 = $389.87
8) Our sibling passed away in July 18th 2014 and our company credit card was lost on the plane to east coast so Adobe could NOT charge 7.26.15
9) Seems the only way to stop them is to lose or cancel your credit card. See Adobe's email below sent 7.26.15
Adobe Creative Cloud <[email protected]>
7/26/15
We have been unable to bill the payment method on file for your account. To make sure you have uninterrupted access to Creative Cloud, please take a moment to update your billing information.
We don't want to see you go
10) September 18th 2014 we had to request one month of service again for 5 days to organize company marketing photo's for designers Illustrator Program, used our NEW Credit Card
11) September 23rd 2014 CANCELED month to month
12) October 19th 2014 called Adobe to ask WHY AGAIN !!!!! they charged card again?? THEY ASSURED they would refund and cancel and apologized AGAIN.
13) November 19th 2014 Adobe charged our new Company Credit Card AGAIN, I called for 1 hour 3 minuets I was assured it would be reimbursed and canceled. NEVER happened
14) December 19th 2014 Adobe charged our new Company Credit Card AGAIN, I called our attorney to get help to resolve.
15) October 20th 2014 to February 18th AGAING OVER CHARGED BY 5 MONTHS @ 29.99 = $149.95
16) January 23rd 2015 called Adobe to tell them we were filing a suit against for charging our card for 21 months of over charging with NO AUTHORIZATION!! Still have not heard back in 34 days.
18) February 27th 2015 I was given this forum to try to bring attention to ADOBE and the horrible awful practices they have.
Adobe will see that not one single minuet of time has been used of their online access from our account.
ADOBE, PLEASE CREDIT OUR CREDIT CARD ON FILE FOR 27 extra unauthorized months 29.99 = 809.73 !!!!
Purposefully not going away,
Gene K.This is an open forum, not Adobe support... you need Adobe staff to help
Adobe contact information - http://helpx.adobe.com/contact.html
-Select your product and what you need help with
-Click on the blue box "Still need help? Contact us" -
Elements do not show up in edge file but they do in HTML file; no errors occured
I am a senior in college working on building a website for a fictional company for a year-long thesis graphic design project. In my class last semester, I learned how to use Edge Animate and created an 11 page website without any trouble. I had always kept the files saved to my flash drive, and kept a backup on my personal laptop as well as on my external hard drive. There was also a backup of the files on a disc that I turned into my professor in mid-December. All of these files worked fine at the time.
In early January, I wanted to make changes to the website so I installed a trial version of Edge Animate on my laptop. When I opened any of the edge files from any of the backups, the stage was blank and the animations did not show up on the timeline. The elements of the website still show up in the Library but they are no longer arranged on the stage. When I got back to school at the end of January, I tried opening the files on the school computers and had the same problem. I asked my professor to try the file that was saved to the disc and he encountered the same issues on his computer. All of these computers are either iMacs or Macbook Pros.
I have not recieved any error messages and did not do anything to corrupt the files or save over them. I am able to open the html files in a browser with no issues; all animations and images work fine. The only change I can think of is that Edge may have been updated over break and when I installed the trial version I installed a newer version, and for some reason the new version of the program could not properly load my project that I started on a older version in October or November of 2013.
I am happy to upload the files but I am unsure how to do that. Please let me know if there is a way to resolve this issue, or will I have to start over?
Thank you!Try to clear your preference and restart your Animate.See if that fixes your problem
http://helpx.adobe.com/edge-animate/kb/restore-preferences-edge-animate.html
If that does not work see if there is a lloopback address lookup.
Check out the correct answer in this post to fix that http://forums.adobe.com/message/6116991
Let us know if this fixed your issue -
Form doesn't submit [was: Please Help!]
I am new to web development and am obviously just not seeing what I'm missing. I re-built our company's website in January (mostly because of over-charging by our webmaster). It is an exceptionally basic .html sight but it works for us. I have learned a great deal about coding the basics and have been slowly going back through my orginal pages and cleaning up the code. While I was doing that I noticed that one of the pages our customers use are from our old website. I am trying to create a form that I will be able to manipulate that has the look and feel of our current site. Maybe you can take a look and explain to me why when I fill in all the required fields and hit the "submit" button nothing happens.
http://http://langsauction.com/Staging/bid_form_test.html
Our server has a cgi folder that has not been touched or moved so I am guessing I just haven't figured out where to add the code I need for this to work.
I have checked the code from our old page:
http://https://langs11.securesites.net/bids/index.php/
Other than it being a .php I can't see what I missed.....
When the information is submitted from the "old" page it is stored on our server and I receive an email notification, I click the link in my email and am directed to a printable page with all of our customer's information. I would like the same thing to happen with my new page.
I really appreciate any help you can give me!
Christina
Subject line edited by moderator to indicate nature of problemYou have been huge help already....I am taking your advise and walking away for this evening.....if you could look into this I would be eternally greatful!!
<?php
* Things to NOTE
* Is it ok to have month values as numbers in this format 01, 02, 03, ... 11... etc..
require_once 'https://langsauction.com/bids/Crypt_Blowfish-1.0.1/Blowfish.php';
include('https://langsauction.com/bids/functions.php');
include('https://langsauction.com/bids/db.php');
$b = new Crypt_Blowfish('5az1bc1dDa1cv1TVa1wQa12xXx');
# for new crypt method
$key = "5az1bc1dDa1cv1TVa1wQa12xXx";
$error_fields = array();
$errors = array();
# passed to function month_display and will print out relevant values
$***_month = array("01" => "January", "02" => "February", "03" => "March", "04" => "April", "05" => "May", "06" => "June", "07" => "July", "08" => "August", "09" => "September", "10" => "October", "11" => "November", "12" => "December");
$***_fields = array("last_name" => "Last Name", "first_name" => "First Name", "address1" => "Address 1", "city" => "City", "state" => "State / Province", "zip" => "Zip / Postal Code", "county" => "County", "country" => "Country", "phone" => "Telephone", "email" => "Email", "cc_type" => "Credit Card Type", "cc_name" => "Names As It Appears On Card");
# keeps track of which fields had errors so
# it's html row can be highlighted
$error_fields = array();
* Credit Card Validation Solution, PHP Edition,
* Usage Example.
* @package CreditCardValidationSolution
* @author Daniel Convissor <[email protected]>
* @copyright The Analysis and Solutions Company, 2002-2003
* @version $Name: rel-5-12 $ $Id: ccvs_example.php,v 1.15 2003/08/06 05:51:57 danielc Exp $
* @link http://www.ccvs.info/
* Require the main file.
require('../Documents/Langsauction/www/langsauction.com/bids/ccvs.inc.php');
$Form = new CreditCardValidationSolution;
* Example of to encrypt and decrypt
$encrypted = $b->encrypt('test');
$decrypted = $b->decrypt($encrypted);
echo " encr - $encrypted - decryp $decrypted";
#echoÊ"Encrypted:Ê" .Êbin2hex($encrypted)Ê.Ê"\n";
# existing code
if (isset($_POST['submit'])) {
dbConnect('langsa');
* Need to Still
* run all fields through POST VARS
* and sanitize data
* use reg match from metrochai validation
# check user has checked Conditions of Sale
if($_POST['agree'] != 'yes') {
array_push($errors, '>>Please read and accept the Conditions of Sale by selecting the checkbox');
foreach ($***_fields as $field => $field_name) {
if($_POST[$field] == '') {
array_push($error_fields, $field);
array_push($errors, '>>The "'. $field_name . '" Field is empty. Please enter information for that field');
* Check that if a user enters a value in the Lot No. field, that all other fields in that row also have values
for($x = 1; $x < 16; $x++) {
if( $_POST['lot' . $x] != '' && ( $_POST['lot_desc' . $x] == '' || $_POST['lot_max' . $x] == '' || $_POST['lot_max_bid' . $x] == '' ) ) {
$lot = 'lot' . $x;
$lot_name = 'Lot No. ' . $_POST['lot' . $x];
array_push($error_fields, $lot );
array_push($errors, '>>Please fill in the additional values for "'. $lot_name . '" in STEP 3');
* Put the names of the card types you accept in here.
* To handle all card types, skip this step and put ''
* in the Accepted argument.
$Accepted = '';
$Month = $_POST['exp_dat_mon'];
$Year = $_POST['exp_dat_yea'];
# adding trim to remove any spaces at beginnning or end
# in order to keep live server from breaking on mysql syntax
$_POST['cc_num'] = trim($_POST['cc_num']);
# check if Credit Card Number is empty
if (empty($_POST['cc_num']) ) {
# if CC Num is blank along with other relevant fields
$Form->CCVSNumber = '4002417016240182';
$Month = '';
$Year = '';
array_push($errors, '>>The "Credit Card Number" Field Is Blank. Please enter information for that field');
# if Credit Card Number is not empty then check integrity of numbers
elseif ( !$Form->validateCreditCard($_POST['cc_num'], 'en', $Accepted, 'Y', $Month, $Year) ) {
array_push($errors, $Form->CCVSError);
array_push($error_fields, 'cc_num');
$count_errors = count($errors);
if($count_errors == 0) {
# form appears to be good so process data
# encrypt credit card info
# PEAR Blowfish Object Call
#$cc_num = $b->encrypt($_POST['cc_num']);
$cc_num = encrypt($_POST['cc_num'], $key); //encrypts the data using the key
//echo "$encrypted<hr>";
#sanitize data
$email = strip_invalid_chars($_POST[email], 'email');
$last_name = strip_invalid_chars($_POST[last_name]);
$first_name = strip_invalid_chars($_POST[first_name]);
$address1 = strip_invalid_chars($_POST[address1]);
$address2 = strip_invalid_chars($_POST[address2]);
$city = strip_invalid_chars($_POST[city]);
$state = strip_invalid_chars($_POST[state]);
$zip = strip_invalid_chars($_POST[zip]);
$county = strip_invalid_chars($_POST[county]);
$country = strip_invalid_chars($_POST[country]);
$phone = strip_invalid_chars($_POST[phone], 'insecure');
$cc_type = strip_invalid_chars($_POST[cc_type]);
$cc_name = strip_invalid_chars($_POST[cc_name]);
$exp_dat_yea = strip_invalid_chars($_POST[exp_dat_yea]);
$exp_dat_mon = strip_invalid_chars($_POST[exp_dat_mon]);
$sql = "INSERT INTO cc_form SET
last_name= '$last_name',
first_name = '$first_name',
address1 = '$address1',
address2 = '$address2',
city = '$city',
state = '$state',
zip = '$zip',
county = '$county',
country = '$country',
phone = '$phone',
email = '$email',
cc_type = '$cc_type',
cc_num = '$cc_num',
exp_dat_mon = '$exp_dat_mon',
exp_dat_yea = '$exp_dat_yea',
cc_name = '$cc_name',
date = NOW()";
$insert_cc_data = mysql_query($sql) or die(mysql_error()) ;
# get id for lots table
# to keep track of each user's lots
$id = mysql_insert_id();
* Insert Lots
foreach ($_POST as $key => $val) {
# sanitize data in all fields in loops
if (preg_match("/lot([0-9]+)/", $key, $matches)) {
#echo "-- $matches[0]";
if($_POST['lot'.$matches[1]] != '') {
$val_lot = strip_invalid_chars($_POST['lot'.$matches[1]]);
$val_lot_desc = strip_invalid_chars($_POST['lot_desc'.$matches[1]]);
$val_lot_max = strip_invalid_chars($_POST['lot_max'.$matches[1]]);
// looks like strip_invalid_chars with type 'all' was stripping out '.' and perhaps the comma from
// the javascript that formatted the number eg: 1,204.02
// will now set type 'insecure' for strip_invalid_chars, which should leave '.' and , commas intact
// for now will leave the lot_max_bid field as a varchar and have the javascript do the formatting
// NOTE if the user's browser does not have javascript enabled
// then currency will not be formatted into the database
// would need to check entries for a '.' and if not found then use php currency formatting function
$val_lot_max_bid = strip_invalid_chars($_POST['lot_max_bid'.$matches[1]], 'insecure');
if(!preg_match("/./", $val_lot_max_bid)) {
//$val_lot_max_bid = number_format($val_lot_max_bid, 2, '.', ',');
#echo $val_lot . "<br />";
#echo $val_lot_desc . "<br />";
#echo $val_lot_max . "<br />";
#echo $val_lot_max_bid . "<br />";
$query_lots = "INSERT
INTO
lots
(lot_nu,
lot_desc,
lot_max,
lot_max_bid,
user_id,
date
values(
'" . $val_lot . "',
'" . $val_lot_desc . "',
'" . $val_lot_max . "',
'" . $val_lot_max_bid . "',
'$id',
NOW()
#v_dump($matches[1]);
$insert_lots = mysql_query($query_lots) or die(mysql_error());
} # end of if isset
* Make Sure Duplicate Entries Don't Occur
* When User Hits Refresh Here
?>
<html>
<head>
<title>Lang's Bids</title>
<script type="text/javascript" src="../Documents/Langsauction/www/langsauction.com/bids/site.js"></script>
<META NAME="ROBOTS" CONTENT="NOINDEX, NOFOLLOW">
</head>
<body>
<center>
<table width="750">
<tr>
<td valign="center"><img src="https://langs11.securesites.net/bids/images/Bid-Banner.jpg">
<br />
<font size="-1" face="Verdana, Arial, Helvetica"><p><ul>Your Absentee Bid Information Was Received. Thank You.</ul></p>
<p><ul><a href="javascript:window.close()">Close Window</a></ul></p></font>
</td>
</tr>
</table>
</center>
</body>
</html>
<?php
* Send Email
$today = date("F j, Y, g:i a");
//$to = "[email protected]";
//$to = "[email protected]";
//$to = "[email protected]";
// current email address to use!
$to = "[email protected]";
//$to = "[email protected]";
$from = "[email protected]";
$subject = "A Lang's Absentee Bid Has Been Submitted - " .$today. "";
$message = "A Lang's Absentee Bid Has Been Submitted on " .$today. "\n\n Visit the Admin Area to view this entry:\n\nhttps://langs1.securesites.net/lang_cc/index.php";
$headers = "From: $from\r\n";
$send = mail($to, $subject, $message, $headers);
exit;
} # end of submit
?>
<html>
<head>
<title>Lang's Bids</title>
<LINK REL="StyleSheet" HREF="../Documents/Langsauction/www/langsauction.com/bids/bids.css" TYPE="text/css">
<SCRIPT LANGUAGE="JavaScript">
<!--http://javascript.internet.com/forms/currency-format.html-->
<!-- Begin
function formatCurrency(num) {
num = num.toString().replace(/\$|\,/g,'');
if(isNaN(num))
num = "0";
sign = (num == (num = Math.abs(num)));
num = Math.floor(num*100+0.50000000001);
cents = num%100;
num = Math.floor(num/100).toString();
if(cents<10)
cents = "0" + cents;
for (var i = 0; i < Math.floor((num.length-(1+i))/3); i++)
num = num.substring(0,num.length-(4*i+3))+','+
num.substring(num.length-(4*i+3));
//return (((sign)?'':'-') + '$' + num + '.' + cents);
return (((sign)?'':'-') + num + '.' + cents);
// End -->
</script>
<style type="text/css">
.disclaimer {
font-family: Georgia, "Times New Roman", Times, serif;
font-size: 14px;
color: #000;
margin: 0px;
padding: 0px;
.heading {
font-family: Georgia, "Times New Roman", Times, serif;
font-size: 30px;
color: #6A0000;
.buttons {
font-family: Georgia, "Times New Roman", Times, serif;
font-size: 54px;
.footer {
font-family: Georgia, "Times New Roman", Times, serif;
font-size: 16px;
line-height: 1px;
font-style: italic;
.tabletitles {
font-family: Georgia, "Times New Roman", Times, serif;
font-size: 14px;
</style>
</head>
<!-- body -->
<body>
<form name=currencyform method="post" action="<?=$_SERVER['../Documents/Langsauction/www/langsauction.com/bids/PHP_SELF']?>#for m_start">
<center>
<table width="750" border="0" cellpadding="0" cellspacing="5" class="text">
<tr>
<td colspan="2" align="center"><img src="Auction Banner.jpg" width="960" height="255" />
</td>
</tr>
<tr>
<td colspan="2" align="left">
<br>
<center>
<font face="arial" size="3">
<span class="heading">Absentee and Phone Bid Form </span><br>
</font>
</center>
<div align="center"><br>
<span class="disclaimer">IMPORTANT: Please read CONDITIONS OF SALE before filling out form.<br><br>
<strong>Absentee Bidding:</strong> Please complete this form to absentee bid on any lots (catalog item numbers) in this auction. Absentee bids are executed on your behalf by our staff in competition with bids from other bidders. In the event two identical absentee bids are received, the bid first received will be accepted. In the event your maximum bid ties with a bid from the phone, the normal policy is to go one increment higher on your behalf to break the tie in your favor. If you want us to do so, PLEASE INDICATE +1 ON THE FORM, IF NOT, PLEASE INDICATE MAX. <br><br>
<strong>Phone Bidding:</strong> If you want to bid on the phone, through a member of Lang’s staff during the auction, please indicate so on this form along with the numbers of the lots you intend to bid on. Be sure to indicate the phone numbers where Lang’s can call you when it’s time for you to bid. We will make every effort to execute all absentee and phone bids. However, if there is an error or omission, Lang’s will not be held liable. <br><br>We require a good faith deposit equal to 20% of the maximum total bid (bank check, money order or VISA/Master Card).
An 18% buyer’s premium will be added to all successful bids. A 3% discount (resulting in 15%) is given for cash or check payments.
<br><br>
<strong>Invoices will be emailed at the close of the auction on Sunday night to the email address provided.</strong><br> Please check your Spam folder or contact Lang’s office if you do not receive your invoice.<br><br>
~MAKE CHECKS PAYABLE TO LANG’S ~ Payment is due in full within ten days following the auction.
Failure to pay within ten days following the auction will jeopardize future absentee & phone bidding privileges.
</span><br><br>
<hr width="100%" size="3" />
</div>
<p></p>
</td>
</tr>
<tr>
<td colspan="2">
<a name="form_start">
<br />
<?php
$error_count = count($errors);
if($error_count > 0) {
echo "<font face=\"arial\" color=\"red\" size=\"2\">";
echo "The Following Errors Occured:<br /><br />";
# $errors = $_GET['errors'];
foreach ($errors as $error_item) {
echo "$error_item<br />";
echo "</font>";
} # end of if error_count
?>
</td>
</tr>
<tr>
<td colspan="2"></td></tr>
<tr <?php if(in_array('first_name', $error_fields)) { echo "bgcolor=\"FFCCCC\"";}?>>
<td align="left">
<p>First Name </p>
</td>
<td align="left" width="550">
<input name="first_name" type="text" value="<?=$_POST['first_name']?>" maxlength="100" size="25" />
<font color="orangered"><b>*</b></font>
</td>
</tr>
<tr <?php if(in_array('last_name', $error_fields)) { echo "bgcolor=\"FFCCCC\"";}?>>
<td align="left" <?php if(in_array('last_name', $error_fields)) { echo "class=\"signupform\"";}?>>
<p>Last Name </p>
</td>
<td align="left">
<input name="last_name" type="text" value="<?=$_POST['last_name']?>" maxlength="100" size="25" />
<font color="orangered" size="+1"><tt><b>*</b></tt></font>
</td>
</tr>
<tr>
<td align="left" <?php if(in_array('address1', $error_fields)) { echo "bgcolor=\"FFCCCC\"";}?>>
<p>Address 1 </p>
</td>
<td align="left">
<input name="address1" type="text" value="<?=$_POST['address1']?>" maxlength="100" size="25" />
<font color="orangered" size="+1"><tt><b>*</b></tt></font>
</td>
</tr>
<tr>
<td align="left">
<p>Address 2 </p>
</td>
<td align="left">
<input name="address2" type="text" value="<?=$_POST['address2']?>" maxlength="100" size="25" />
</td>
</tr>
<tr valign="top" <?php if(in_array('city', $error_fields)) { echo "bgcolor=\"FFCCCC\"";}?>>
<td align="left">
<p>City </p>
</td>
<td align="left">
<input name="city" type="text" value="<?=$_POST['city']?>" maxlength="100" size="25" />
<font color="orangered" size="+1"><tt><b>*</b></tt></font>
</td>
</tr>
<tr valign="top" <?php if(in_array('state', $error_fields)) { echo "bgcolor=\"FFCCCC\"";}?>>
<td align="left">
<p>State / Province </p>
</td>
<td align="left">
<!--
<select name="state" class="text">
<option value="<?php echo isset($_POST['state']) ? $_POST['state'] : ""; ?>"><?php echo isset($_POST['state']) ? $_POST['state'] : "Select State"; ?></option>
<?php echo QAstatelist($vars['state']); ?>"
</select>
-->
<input name="state" type="text" value="<?=$_POST['state']?>" maxlength="100" size="25" />
<font color="orangered" size="+1"><tt><b>*</b></tt></font>
</td>
</tr>
<tr valign="top" <?php if(in_array('zip', $error_fields)) { echo "bgcolor=\"FFCCCC\"";}?>>
<td align="left">
<p>Zip / Postal Code </p>
</td>
<td align="left">
<input name="zip" type="text" value="<?=$_POST['zip']?>" maxlength="100" size="25" />
<font color="orangered" size="+1"><tt><b>*</b></tt></font>
</td>
</tr>
<!-- adding Country -->
<tr valign="top" <?php if(in_array('country', $error_fields)) { echo "bgcolor=\"FFCCCC\"";}?>>
<td align="left">
<p>Country </p>
</td>
<td align="left">
<input name="country" type="text" value="<?=$_POST['country']?>" maxlength="100" size="25" />
<font color="orangered" size="+1"><tt><b>*</b></tt></font>
</td>
</tr>
<tr valign="top" <?php if(in_array('phone', $error_fields)) { echo "bgcolor=\"FFCCCC\"";}?>>
<td align="left">
<p>Telephone </p>
</td>
<td align="left">
<input name="phone" type="text" value="<?=$_POST['phone']?>" maxlength="100" size="25" />
<font color="orangered" size="+1"><tt><b>*</b></tt></font>
</td>
</tr>
<tr valign="top" <?php if(in_array('email', $error_fields)) { echo "bgcolor=\"FFCCCC\"";}?>>
<td align="left">
<p>eMail </p>
</td>
<td align="left">
<input name="email" type="text" value="<?=$_POST['email']?>" maxlength="100" size="25" />
<font color="orangered" size="+1"><tt><b>*</b></tt></font>
</td>
</tr>
<tr valign="top" <?php if(in_array('cc_type', $error_fields)) { echo "bgcolor=\"FFCCCC\"";}?>>
<td align="left">
<p>Credit Card Type </p>
</td>
<td align="left">
<select name="cc_type" size="1">
<option value="<?=$_POST['cc_type']?>"><?php echo isset($_POST['cc_type']) ? $_POST['cc_type'] : "Select Type"; ?></option>
<option value="Visa">Visa</option>
<option value="MasterCard">MasterCard</option>
</select>
<font color="orangered" size="+1"><tt><b>*</b></tt></font>
</td>
</tr>
<tr <?php if(in_array('cc_num', $error_fields)) { echo "bgcolor=\"FFCCCC\"";}?>>
<td align="left">
<p>Credit Card Number <br /></p>
</td>
<td align="left">
<input name="cc_num" type="text" value="<?=$_POST['cc_num']?>" maxlength="100" size="25" />
<font color="orangered" size="+1"><tt><b>*</b></tt><br /><font face="arial" size="1" color="#FF0000"><b>(numbers only, no dashes please)</b></font></font>
</td>
</tr>
<tr <?php if(in_array('exp_dat_mon', $error_fields)) { echo "bgcolor=\"FFCCCC\"";}?><?php if(in_array('exp_dat_yea', $error_fields)) { echo "bgcolor=\"FFCCCC\"";}?>>
<td align="left">
<p>Expiration Date </p>
</td>
<td align="left">
<select name="exp_dat_mon" size="1">
<?php if(!isset($_POST['exp_dat_mon'])) { echo "<option value=\"\">Select Month</option>";}?>
<?php echo month_display($***_month, $_POST['exp_dat_mon']); ?>"
</select>
<select name="exp_dat_yea" size="1">
<option value="<?=$_POST['exp_dat_yea']?>"><?=$_POST['exp_dat_yea']?></option>
<option value="2008">2008</option>
<option value="2009">2009</option>
<option value="2010">2010</option>
<option value="2011">2011</option>
<option value="2012">2012</option>
<option value="2013">2013</option>
<option value="2014">2014</option>
<option value="2015">2015</option>
<option value="2016">2016</option>
<option value="2017">2017</option>
<option value="2018">2018</option>
<option value="2019">2019</option>
<option value="2020">2020</option>
<option value="2021">2021</option>
<option value="2022">2022</option>
</select>
<font color="orangered" size="+1"><tt><b>*</b></tt></font>
</td>
</tr>
<tr <?php if(in_array('cc_name', $error_fields)) { echo "bgcolor=\"FFCCCC\"";}?>>
<td align="left">
<p>Names As It <br />
Appears On Card </p>
</td>
<td align="left">
<input name="cc_name" type="text" value="<?=$_POST['cc_name']?>" maxlength="100" size="25" />
<font color="orangered" size="+1"><tt><b>*</b></tt></font>
</td>
</tr>
<tr>
<td colspan="2">
<table width="640">
<tr><td colspan="4"><hr noshade="noshade" /></td></tr>
<tr><td colspan="4"><font face="arial" size="3" color="#FF0000">STEP 3</FONT></td></tr>
<tr>
<td align="left" valign="top" class="tabletitles">LOT No.</td>
<td align="left" valign="top" class="tabletitles">DESCRIPTION</td>
<td align="left" valign="top" class="tabletitles">MAX, +1 or PHONE</td>
<td align="left" valign="top" class="tabletitles">BID AMOUNT</td>
</tr>
<?php
for($x = 1; $x < 16; $x++) {
?>
<tr>
<td>
<input name="lot<?=$x?>" type="text" value="<?=$_POST['lot' . $x]?>" maxlength="90" size="15" />
</td>
<td>
<input name="lot_desc<?=$x?>" type="text" value="<?=$_POST['lot_desc' . $x]?>" maxlength="100" size="50" />
</td>
<td>
<input name="lot_max<?=$x?>" type="text" value="<?=$_POST['lot_max' . $x]?>" maxlength="90" size="30" />
</td>
<td>
<input type=text name="lot_max_bid<?=$x?>" maxlength="90" size="30" value="<?=$_POST['lot_max_bid' . $x]?>" onBlur="this.value=formatCurrency(this.value);">
<!-- old input field without javascript currency formatter
<input name="lot_max_bid<?=$x?>" type="text" value="<?=$_POST['lot_max_bid' . $x]?>" />
-->
</td>
</tr>
<?php
?>
</table>
</td>
</tr>
<tr>
<td colspan="2">
<p><br /><br /><p>
<input type="checkbox" name="agree" value="yes" <?php if($_POST['agree'] == 'yes') { echo "checked";}?>> <b>I have read and accept the <a href="http://langsauction.com/CONDITIONS OF SALE.pdf" target="_blank"><font color="#FF0000">Conditions of Sale (required)</b></a>
</p>
<br />
</td>
</tr>
<tr>
<td align="right" colspan="2">
<hr noshade="noshade" />
<input type="reset" value="Reset" />
<input type="submit" name="submit" value="Submit " />
</td>
</tr>
</table>
</center>
</form>
<br>
<hr width="100%" size="3" /><br>
<p align="center" class="footer">Lang's Auction, Inc. • 663 Pleasant Valley Road • Waterville, NY 13480 </p>
<p align="center" class="footer">Phone: 315-841-4623 • Fax: 315-841-8934 • <a href="mailto:[email protected]">[email protected]</a></p>
<br />
<hr width="75%" size="3" />
<p align="center" class="footer"> </p>
<div align="center"><i>© 2012 Lang's Auction, Inc. All rights reserved.</i></div>
</p>
<script type="text/javascript">
var _gaq = _gaq || [];
_gaq.push(['_setAccount', 'UA-17131030-1']);
_gaq.push(['_trackPageview']);
(function() {
var ga = document.createElement('script'); ga.type = 'text/javascript'; ga.async = true;
ga.src = ('https:' == document.location.protocol ? 'https://ssl' : 'http://www') + '.google-analytics.com/ga.js';
var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(ga, s);
</script>
</body>
</html>
<!--- table bottom of main body content --> -
Variable (Perhaps replacement Path) to group past months together
Hello.
I'm trying to perform a query that would group past months data within the current month to aggregate my Key Figures.
As an example, I have in my InfoCube:
- Material
- CalendarMonth
- Initial Qty (Key Figure)
- Added Qty (Key Figure)
- Substracted Qty (Key Figure)
I'd like to get something like my materials on rows, CalendarMonth on column with my 3 Key Figures on rows as well. The only thing is that all data pertaining to months prior to "Right now (i.e. August 08)" should be aggregated in August 08, therefore, my first month of data displayed would be August and not January 08 if I have data in this month.
This might be very basic to you experts out there but I'm pretty new to the nice BW world and can't figure how to do it. Any help would be appreciated.
Thank you.
P.s. I can't find anywhere (except for the small hints on the right when posting a new thread) how I can format my post as I'd like to put TABS and space but they're getting removed in the preview, is there anywhere the list of ALL possible codes I can use when posting ?August 08 September 08 October 08 November 08 December 08 January 09 February 09 March 09
MATERIAL-1 Initial Qty 20,000
Added Qty 5,000 8,000 2,000 2,500 3,000
Subst. Qty 2,000 6,500 15,000 2,800 6,400 5,000
Total 20,000 23,000 16,500 24,500 11,500 11,200 4,800 2,800
MATERIAL-2 Initial Qty u2026 u2026 u2026 u2026 u2026 u2026 u2026 u2026
Added Qty u2026 u2026 u2026 u2026 u2026 u2026 u2026 u2026
Subst. Qty u2026 u2026 u2026 u2026 u2026 u2026 u2026 u2026
Total u2026 u2026 u2026 u2026 u2026 u2026 u2026 u2026
Ok, I've finally been able to manage a "similar" output to what I'm trying to achieve. The total line would actually be a calculated key figure based on the three others. So in the example above, user as specified March 2009 to be the end calendar period he wants to see the inventory "estimates". All data prior August 2008 should be shown in August 2008 in their respective Key Figures and then the "Total" would adjust accordingly. So to answer your question, yes, the same logic need to apply to all 3 Key Figures. -
Can any Mods Help me? Please....?
I am at my wits end with mt BT Infinity issue. Thsi has now been ongoing since late October/Early November.
I did have BT Ifinity 2 and this was working perfectly well for 18 months, up until Oct/Nov 2014. We are now i Feb 2015 and my line is still dropping about 8-10 times a day. Every time i come home from work i check the Home Hub manager for connection time and i never see more than 4 hours connection time.
Over the weekend when everyone is in the house using the www, we can see the drops as we all lose connection, HH5 light goes orange for about 3 mins then re-connects.
I was told that i would never achieve more than 25Mbs so i was wasting my money paying for Infinity 2 , yet it was a BT Salesman who sold me Infinity 2, so i reduced to Infinity 1.
My complaint is not the speed (22 down, 5 up), but the constant drops. I have had 3 openreach engineers who have said i have too many faults on the line so the line resets itself hence the drops, but no matter who jiggery pokery then twiddle with the issue does not go away and the line drops.
I have spent countless housr on the phone to level 2 and all they keep saying is the line is desgined to drop....Nonsense!
So today BT wrapped their hands in and Said to me that there is nothing more they can do and advise me to go back to copper..(3 down and 1 up!!)
i have said i will cancel my contract as BT is failing to provide me with a service that i pay for. BT CS say i have to pay to get out of my contract!!
I have heard that some Mods on here are very good at problem solving and advising my next course of action. I don't want to go back to copper, i just want a service like i had for the first 18 months of Infinity?
PLEASE HELP ME before i rip sombodies throat out!!
Thank You
Stevecol56googling "PPP LCP Send Termination Request [User request]" and you get massive amount of hits.......
Seems this is a big issue and BT anr generally throwing their arms in the air and saying "we don't know" like they did with me today.
However reading into a few of these hits/blogs/forum post, it seems a fix is a Lift and Shift of you line to another board in the BT Exchange?
Do you know how i can get BT to try this for me? As you can see from my very short log file i get a disconnected about every 90 mins. Which if i am streaming or downloading is bad but not catestrophic however to get a disconnection when transfering files via VPN can be very bad.
In need a fix and i am desperate, so anyone know how i can get BT to do a lift and shift for me???
Thanks -
Can I choose which backup file to restore?
Just lost my data off my 3GS, which would hang during the backup, sync, upgrade process every time I tried to go from OS 3 to 4 in the past 6 mos or so.
Went to Apple store, decided to just trash everything, restart on OS 4 and just use most recent successful backup to restore. Ended up upgrading to an iPhone 4 instead...
Came home and looked up my .mdbackup files and there are three of the them. May, October and November of 2010. I plugged in my new phone, hoping to access the most recent backup and it shows only the May one.
Is there any way to access and restore to what appears to be the most recent November backup file?
Thanks.Thanks Barney - is it really that simple? I didn't think to do that. Will try that this evening. Appreciated.
-
How to get the output in the required format
Hi,
I have a table Months
it has 2 columns month_id (number) and month_name(varchar2).
I wish to get the o/p from a select query such that ,
when user chooses a specific month_id it should appear first and rest all months should come below it in ascending order.
example - if the month_id choosen is 3
then the output should be like
Month_id Month
3 March
1 January
2 February
4 April
5 May
How to do this ?
Thanks.Here is one way ->
satyaki>
satyaki>with date_tab
2 as
3 (
4 select rownum month_id
5 from dual
6 connect by rownum < 13
7 )
8 select month_id,
9 to_char(add_months(trunc(sysdate,'YEAR'), month_id - 1),'Month') Month
10 from date_tab;
MONTH_ID MONTH
1 January
2 February
3 March
4 April
5 May
6 June
7 July
8 August
9 September
10 October
11 November
MONTH_ID MONTH
12 December
12 rows selected.
Elapsed: 00:00:00.00
satyaki>Regards.
Satyaki De. -
Dots Every Day in Calendar Month View
I have the dots indicating an event on every day of the monthly view in the calendar even though there aren't any events on those dates. I am syncing with Outlook 2003 on Windows XP. I have read through posts here and:
- Had some birthdays set up in the contacts but removed them
- Do not have any events where the end time is earlier than the start time
I have tried many different things including turning calendar syncing off, replacing all of the info for calendars, etc. but cannot get it fixed.
Any other suggestions? How can I delete the info on the Calendar. Turning off syncing doesn't do it. Do I need to do a full reset?
Thanks.Thanks. Your suggestion did the trick.
I assumed it marked every date in perpetuity with a dot. I went backwards until I found a month without a dot. After a couple of dozen clicks on the back arrow, I realized if I held it down it would go faster.
Went back to 1971 and found an entry for a birth date. The interesting thing is, is that it was in October. November looked fine and then in December, the dots started occurring. Deleted the entry and everything looks good again.
Thanks. -
My ipod touch 4th generation will not turn on
I was using it for like 5 minutes and I put it away in the side compartment of my backpack and when I went to use it like two hours later it would not turn on, the low battery image did come up and even when I plugged it into my ipod dock it still did not come on, now I have it plugged into my computer and still nothing. I bought it when it first came out about october or november I think. I guess my question is will the replace it because I didn't do anything to cause this to happen.
Well there is one thing you can try... hold down the home button and lock/sleep button at the same time and don't forget to hold it. It should turn on. (By the way what you are doing is a restart, if you were on your iPod Touch on the home screen and you did thins it would reboot, and that is exactly why you are doing this)
-
The iPad could not be restored. An unknown error occurred (1)
As a lot of people had last night the Apple servers were very busy with iPads and iPhones upgrading to iOS5... So I waited until this morning to upgrade.
iPhone 4 no issues at all and now using iOS5
iPad (version 1) backed up but not is coming up with the following error:
The iPad "iPad" could not be restored. An unknown error occurred (1)
Typically error 1 isn't on the list and I can only find a handful of similar comments with no luck in fixing this.
The error appears when trying to restore the firmware and I have tried rebooting my mbp and iPad multiple times. I have even resorted to installing iTunes on my Windows 7 PC where I also get the same error.
Anyone had any luck in getting past this?I am having this same problem. I haven't plugged my ipad into my computer in 6 months or so but some of the apps (like ABC shows) are now asking for the the iOS5 so I figured I needed to go ahead and get everything updated. I have an ipad1 16G, with wifi and Verizon 3G and am using itunes on a pc. The cellular was turned off when I plugged it in, but the wifi was turned on. It is now stuck in an endless loop where it tells me that itunes has detected an ipad that needs system restore, but when i try to restore, it eventually comes back with an error that says "The iPad "iPad" could not be restored. An unknown error occurred (1)."
I plugged in and updated my iPhone 4 and it updated no problem.
I see that all these notes about this problem are back from October and November of last year. I'm wondering if anyone has had it recently or if a solution has been identified?
It sounds like if I keep trying the restore over and over again like 100 times, it might eventually work? I don't think it's fair for me to have to buy a new device since it was apple's update software that broke it. -
Late 2011 Macbook Pro Crash/Random Restart
Often when I would browse the web using Chrome, the OS will crash after using too tabs or will simply hang and will restart itself. I'm using Mavericks 10.9.5.
Model Name: MacBook Pro
Model Identifier: MacBookPro8,1
Processor Name: Intel Core i5
Processor Speed: 2.4 GHz
Number of Processors: 1
Total Number of Cores: 2
L2 Cache (per Core): 256 KB
L3 Cache: 3 MB
Memory: 16 GB
Boot ROM Version: MBP81.0047.B27
SMC Version (system): 1.68f99
Sudden Motion Sensor:
State: Enabled
It happens occasionally, enough times to get me worried about losing my work in a god forbid once in a blue moon moment. I have two error reports from the last two months, October and November.
OCTOBER
Wed Oct 22 12:43:20 2014
panic(cpu 2 caller 0xffffff800dadc43e): Kernel trap at 0xffffff7f8f3ab8a9, type 14=page fault, registers:
CR0: 0x0000000080010033, CR2: 0xfffffe8033875e58, CR3: 0x000000004a3e1044, CR4: 0x00000000000606e0
RAX: 0xfffffe8033875e00, RBX: 0xffffff8035c6e000, RCX: 0xffffff81ad1a3000, RDX: 0xffffff802ea1dec0
RSP: 0xffffff81f89dba70, RBP: 0xffffff81f89dba80, RSI: 0xfffffe8033875e00, RDI: 0xffffff8035c6e000
R8: 0xffffff81f89dbad8, R9: 0xffffff81f89dbadc, R10: 0xffffff7f8f3ad774, R11: 0x00000000000001ff
R12: 0xffffff800e103770, R13: 0x0000000000000000, R14: 0x0000000000000004, R15: 0xffffff80366a6400
RFL: 0x0000000000010286, RIP: 0xffffff7f8f3ab8a9, CS: 0x0000000000000008, SS: 0x0000000000000010
Fault CR2: 0xfffffe8033875e58, Error code: 0x0000000000000000, Fault CPU: 0x2
Backtrace (CPU 2), Frame : Return Address
0xffffff81f89db700 : 0xffffff800da22f79
0xffffff81f89db780 : 0xffffff800dadc43e
0xffffff81f89db950 : 0xffffff800daf3976
0xffffff81f89db970 : 0xffffff7f8f3ab8a9
0xffffff81f89dba80 : 0xffffff7f8f3ad7c3
0xffffff81f89dbab0 : 0xffffff800dece655
0xffffff81f89dbb40 : 0xffffff800ded068f
0xffffff81f89dbba0 : 0xffffff800dece1af
0xffffff81f89dbcf0 : 0xffffff800dab6998
0xffffff81f89dbe00 : 0xffffff800da26bc1
0xffffff81f89dbe30 : 0xffffff800da139c5
0xffffff81f89dbea0 : 0xffffff800da1e013
0xffffff81f89dbf20 : 0xffffff800dac9a5d
0xffffff81f89dbfb0 : 0xffffff800daf3f48
Kernel Extensions in backtrace:
com.apple.driver.AppleIntelHD3000Graphics(8.2.4)[7429A6CD-C002-3F04-B5CA-31F6D1 4BA689]@0xffffff7f8f391000->0xffffff7f8f3f2fff
dependency: com.apple.iokit.IOPCIFamily(2.9)[2852ACFE-FD28-3C37-9B39-885201BB8D25]@0xffffff 7f8e0bf000
dependency: com.apple.iokit.IOGraphicsFamily(2.4.1)[75D81741-64C1-3941-ADFA-9D6B6C434EE4]@0 xffffff7f8e8f1000
BSD process name corresponding to current thread: Google Chrome
Mac OS version:
13F34
Kernel version:
Darwin Kernel Version 13.4.0: Sun Aug 17 19:50:11 PDT 2014; root:xnu-2422.115.4~1/RELEASE_X86_64
Kernel UUID: 9477416E-7BCA-3679-AF97-E1EAAD3DD5A0
Kernel slide: 0x000000000d800000
Kernel text base: 0xffffff800da00000
System model name: MacBookPro8,1 (Mac-94245B3640C91C81)
System uptime in nanoseconds: 2133234099642
last loaded kext at 245493209621: com.apple.filesystems.msdosfs 1.9 (addr 0xffffff7f8f837000, size 65536)
last unloaded kext at 322821054898: com.apple.filesystems.msdosfs 1.9 (addr 0xffffff7f8f837000, size 57344)
loaded kexts:
com.apple.driver.AudioAUUC 1.60
com.apple.driver.AppleHWSensor 1.9.5d0
com.apple.iokit.IOBluetoothSerialManager 4.2.7f3
com.apple.filesystems.autofs 3.0
com.apple.driver.AGPM 100.14.34
com.apple.driver.AppleMikeyHIDDriver 124
com.apple.driver.AppleHDA 2.6.3f4
com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport 4.2.7f3
com.apple.driver.AppleMikeyDriver 2.6.3f4
com.apple.driver.AppleThunderboltIP 1.1.2
com.apple.driver.AppleSMCLMU 2.0.4d1
com.apple.driver.ApplePolicyControl 3.6.22
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AppleHWAccess 1
com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0
com.apple.driver.AppleLPC 1.7.0
com.apple.driver.AppleSMCPDRC 1.0.0
com.apple.driver.AppleUpstreamUserClient 3.5.13
com.apple.driver.AppleBacklight 170.4.11
com.apple.driver.AppleMCCSControl 1.2.5
com.apple.driver.AppleIntelHD3000Graphics 8.2.4
com.apple.driver.AppleIntelSNBGraphicsFB 8.2.4
com.apple.driver.SMCMotionSensor 3.0.4d1
com.apple.driver.AppleUSBTCButtons 240.2
com.apple.driver.AppleUSBTCKeyboard 240.2
com.apple.driver.AppleIRController 325.7
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeLZVN 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 35
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCIBlockStorage 2.6.0
com.apple.driver.AppleUSBHub 683.4.0
com.apple.iokit.AppleBCM5701Ethernet 3.8.1b2
com.apple.driver.AppleSDXC 1.5.2
com.apple.driver.AppleFWOHCI 5.0.2
com.apple.driver.AirPort.Brcm4331 700.20.22
com.apple.driver.AppleAHCIPort 3.0.5
com.apple.driver.AppleUSBEHCI 660.4.0
com.apple.driver.AppleSmartBatteryManager 161.0.0
com.apple.driver.AppleACPIButtons 2.0
com.apple.driver.AppleRTC 2.0
com.apple.driver.AppleHPET 1.8
com.apple.driver.AppleSMBIOS 2.1
com.apple.driver.AppleACPIEC 2.0
com.apple.driver.AppleAPIC 1.7
com.apple.driver.AppleIntelCPUPowerManagementClient 217.92.1
com.apple.nke.applicationfirewall 153
com.apple.security.quarantine 3
com.apple.driver.AppleIntelCPUPowerManagement 217.92.1
com.apple.iokit.IOSerialFamily 10.0.7
com.apple.kext.triggers 1.0
com.apple.iokit.IOSCSIArchitectureModelFamily 3.6.7
com.apple.AppleGraphicsDeviceControl 3.6.22
com.apple.driver.DspFuncLib 2.6.3f4
com.apple.vecLib.kext 1.0.0
com.apple.iokit.IOAudioFamily 1.9.7fc2
com.apple.kext.OSvKernDSPLib 1.14
com.apple.iokit.IOBluetoothHostControllerUSBTransport 4.2.7f3
com.apple.iokit.IOFireWireIP 2.2.6
com.apple.iokit.IOSurface 91.1
com.apple.iokit.IOBluetoothFamily 4.2.7f3
com.apple.driver.AppleGraphicsControl 3.6.22
com.apple.driver.AppleHDAController 2.6.3f4
com.apple.iokit.IOHDAFamily 2.6.3f4
com.apple.driver.IOPlatformPluginLegacy 1.0.0
com.apple.driver.IOPlatformPluginFamily 5.7.1d6
com.apple.driver.AppleSMBusPCI 1.0.12d1
com.apple.driver.AppleBacklightExpert 1.0.4
com.apple.driver.AppleSMBusController 1.0.12d1
com.apple.iokit.IONDRVSupport 2.4.1
com.apple.iokit.IOGraphicsFamily 2.4.1
com.apple.driver.AppleSMC 3.1.8
com.apple.driver.AppleThunderboltDPInAdapter 3.1.7
com.apple.driver.AppleThunderboltDPAdapterFamily 3.1.7
com.apple.driver.AppleThunderboltPCIDownAdapter 1.4.5
com.apple.driver.AppleUSBMultitouch 240.10
com.apple.iokit.IOUSBHIDDriver 660.4.0
com.apple.driver.AppleUSBMergeNub 650.4.0
com.apple.driver.AppleUSBComposite 656.4.1
com.apple.driver.AppleThunderboltNHI 2.0.1
com.apple.iokit.IOThunderboltFamily 3.3.1
com.apple.iokit.IOEthernetAVBController 1.0.3b4
com.apple.driver.mDNSOffloadUserClient 1.0.1b5
com.apple.iokit.IOUSBUserClient 660.4.2
com.apple.iokit.IOFireWireFamily 4.5.5
com.apple.iokit.IO80211Family 640.36
com.apple.iokit.IONetworkingFamily 3.2
com.apple.iokit.IOAHCIFamily 2.6.5
com.apple.iokit.IOUSBFamily 686.4.1
com.apple.driver.AppleEFINVRAM 2.0
com.apple.driver.AppleEFIRuntime 2.0
com.apple.iokit.IOHIDFamily 2.0.0
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 278.11.1
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 7
com.apple.driver.AppleKeyStore 2
com.apple.driver.DiskImages 371.1
com.apple.iokit.IOStorageFamily 1.9
com.apple.iokit.IOReportFamily 23
com.apple.driver.AppleFDEKeyStore 28.30
com.apple.driver.AppleACPIPlatform 2.0
com.apple.iokit.IOPCIFamily 2.9
com.apple.iokit.IOACPIFamily 1.4
com.apple.kec.corecrypto 1.0
com.apple.kec.pthread 1
NOVEMBER
Fri Nov 21 05:05:53 2014
panic(cpu 2 caller 0xffffff80092c5790): "Possible memory corruption: pmap_pv_remove(0xffffff802dd5ed68, 0x7fff6ca6d000, 0x9f94, 0x9f94024, 0xffffff81f463bcc4, 0xfffffe8d29467368): pv not on hash, head: 0xffffff8028db2c30, 0x7fff6685a000"@/SourceCache/xnu/xnu-2422.115.4/osfmk/i386/pmap_internal.h:836
Backtrace (CPU 2), Frame : Return Address
0xffffff81f463bb90 : 0xffffff8009222f79
0xffffff81f463bc10 : 0xffffff80092c5790
0xffffff81f463bcf0 : 0xffffff80092c60b7
0xffffff81f463bd50 : 0xffffff800927e2fa
0xffffff81f463be60 : 0xffffff80092825cf
0xffffff81f463be90 : 0xffffff800923d9e3
0xffffff81f463bed0 : 0xffffff80095cee8e
0xffffff81f463bf40 : 0xffffff80095cebbc
0xffffff81f463bf50 : 0xffffff8009640c63
0xffffff81f463bfb0 : 0xffffff80092f4176
BSD process name corresponding to current thread: codesign
Mac OS version:
13F34
Kernel version:
Darwin Kernel Version 13.4.0: Sun Aug 17 19:50:11 PDT 2014; root:xnu-2422.115.4~1/RELEASE_X86_64
Kernel UUID: 9477416E-7BCA-3679-AF97-E1EAAD3DD5A0
Kernel slide: 0x0000000009000000
Kernel text base: 0xffffff8009200000
System model name: MacBookPro8,1 (Mac-94245B3640C91C81)
System uptime in nanoseconds: 15836525588204
last loaded kext at 13143214094219: com.apple.filesystems.msdosfs 1.9 (addr 0xffffff7f8b0e0000, size 65536)
last unloaded kext at 13374133023164: com.apple.driver.AppleUSBCDC 4.2.1b5 (addr 0xffffff7f8b0b0000, size 16384)
loaded kexts:
com.apple.filesystems.smbfs 2.0.3
com.apple.driver.AudioAUUC 1.60
com.apple.driver.AppleHWSensor 1.9.5d0
com.apple.filesystems.autofs 3.0
com.apple.iokit.IOBluetoothSerialManager 4.2.7f3
com.apple.driver.AGPM 100.14.34
com.apple.driver.AppleMikeyHIDDriver 124
com.apple.driver.AppleHDA 2.6.3f4
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AppleSMCLMU 2.0.4d1
com.apple.driver.AppleHWAccess 1
com.apple.driver.ApplePolicyControl 3.6.22
com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport 4.2.7f3
com.apple.driver.AppleUpstreamUserClient 3.5.13
com.apple.driver.AppleLPC 1.7.0
com.apple.driver.AppleMikeyDriver 2.6.3f4
com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0
com.apple.driver.AppleThunderboltIP 1.1.2
com.apple.driver.AppleBacklight 170.4.11
com.apple.driver.AppleMCCSControl 1.2.5
com.apple.driver.AppleIntelHD3000Graphics 8.2.4
com.apple.driver.AppleIntelSNBGraphicsFB 8.2.4
com.apple.driver.SMCMotionSensor 3.0.4d1
com.apple.driver.AppleSMCPDRC 1.0.0
com.apple.driver.AppleUSBTCButtons 240.2
com.apple.driver.AppleUSBTCKeyboard 240.2
com.apple.driver.AppleIRController 325.7
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeLZVN 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 35
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCIBlockStorage 2.6.0
com.apple.driver.AppleUSBHub 683.4.0
com.apple.driver.AppleFWOHCI 5.0.2
com.apple.driver.AppleSDXC 1.5.2
com.apple.driver.AirPort.Brcm4331 700.20.22
com.apple.iokit.AppleBCM5701Ethernet 3.8.1b2
com.apple.driver.AppleAHCIPort 3.0.5
com.apple.driver.AppleUSBEHCI 660.4.0
com.apple.driver.AppleSmartBatteryManager 161.0.0
com.apple.driver.AppleRTC 2.0
com.apple.driver.AppleACPIButtons 2.0
com.apple.driver.AppleHPET 1.8
com.apple.driver.AppleSMBIOS 2.1
com.apple.driver.AppleACPIEC 2.0
com.apple.driver.AppleAPIC 1.7
com.apple.driver.AppleIntelCPUPowerManagementClient 217.92.1
com.apple.nke.applicationfirewall 153
com.apple.security.quarantine 3
com.apple.driver.AppleIntelCPUPowerManagement 217.92.1
com.apple.kext.triggers 1.0
com.apple.iokit.IOSerialFamily 10.0.7
com.apple.iokit.IOSCSIArchitectureModelFamily 3.6.7
com.apple.AppleGraphicsDeviceControl 3.6.22
com.apple.driver.DspFuncLib 2.6.3f4
com.apple.vecLib.kext 1.0.0
com.apple.iokit.IOAudioFamily 1.9.7fc2
com.apple.kext.OSvKernDSPLib 1.14
com.apple.iokit.IOSurface 91.1
com.apple.iokit.IOBluetoothFamily 4.2.7f3
com.apple.driver.AppleHDAController 2.6.3f4
com.apple.iokit.IOHDAFamily 2.6.3f4
com.apple.iokit.IOBluetoothHostControllerUSBTransport 4.2.7f3
com.apple.iokit.IOFireWireIP 2.2.6
com.apple.driver.AppleSMBusPCI 1.0.12d1
com.apple.driver.IOPlatformPluginLegacy 1.0.0
com.apple.driver.AppleGraphicsControl 3.6.22
com.apple.driver.AppleBacklightExpert 1.0.4
com.apple.driver.AppleSMBusController 1.0.12d1
com.apple.iokit.IONDRVSupport 2.4.1
com.apple.iokit.IOGraphicsFamily 2.4.1
com.apple.driver.AppleSMC 3.1.8
com.apple.driver.IOPlatformPluginFamily 5.7.1d6
com.apple.driver.AppleThunderboltDPInAdapter 3.1.7
com.apple.driver.AppleThunderboltDPAdapterFamily 3.1.7
com.apple.driver.AppleThunderboltPCIDownAdapter 1.4.5
com.apple.driver.AppleUSBMultitouch 240.10
com.apple.iokit.IOUSBHIDDriver 660.4.0
com.apple.driver.AppleUSBMergeNub 650.4.0
com.apple.driver.AppleUSBComposite 656.4.1
com.apple.driver.AppleThunderboltNHI 2.0.1
com.apple.iokit.IOThunderboltFamily 3.3.1
com.apple.iokit.IOUSBUserClient 660.4.2
com.apple.iokit.IOFireWireFamily 4.5.5
com.apple.iokit.IO80211Family 640.36
com.apple.iokit.IOEthernetAVBController 1.0.3b4
com.apple.driver.mDNSOffloadUserClient 1.0.1b5
com.apple.iokit.IONetworkingFamily 3.2
com.apple.iokit.IOAHCIFamily 2.6.5
com.apple.iokit.IOUSBFamily 686.4.1
com.apple.driver.AppleEFINVRAM 2.0
com.apple.driver.AppleEFIRuntime 2.0
com.apple.iokit.IOHIDFamily 2.0.0
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 278.11.1
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 7
com.apple.driver.AppleKeyStore 2
com.apple.driver.DiskImages 371.1
com.apple.iokit.IOStorageFamily 1.9
com.apple.iokit.IOReportFamily 23
com.apple.driver.AppleFDEKeyStore 28.30
com.apple.driver.AppleACPIPlatform 2.0
com.apple.iokit.IOPCIFamily 2.9
com.apple.iokit.IOACPIFamily 1.4
com.apple.kec.corecrypto 1.0
com.apple.kec.pthread 1
Model: MacBookPro8,1, BootROM MBP81.0047.B27, 2 processors, Intel Core i5, 2.4 GHz, 16 GB, SMC 1.68f99
Graphics: Intel HD Graphics 3000, Intel HD Graphics 3000, Built-In, 512 MB
Memory Module: BANK 0/DIMM0, 8 GB, DDR3, 1600 MHz, 0x859B, 0x43543130323436344246313630422E433136
Memory Module: BANK 1/DIMM0, 8 GB, DDR3, 1600 MHz, 0x859B, 0x43543130323436344246313630422E433136
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0xD6), Broadcom BCM43xx 1.0 (5.106.98.100.22)
Bluetooth: Version 4.2.7f3 14616, 3 services, 23 devices, 1 incoming serial ports
Serial ATA Device: APPLE HDD HTS547550A9E384, 500.11 GB
Serial ATA Device: Crucial_CT240M500SSD1, 240.06 GB
USB Device: Hub
USB Device: IR Receiver
USB Device: FaceTime HD Camera (Built-in)
USB Device: Hub
USB Device: BRCM2070 Hub
USB Device: Bluetooth USB Host Controller
USB Device: Apple Internal Keyboard / Trackpad
Thunderbolt Bus: MacBook Pro, Apple Inc., 25.1Google Chrome has a history of compatibility problems with OSX. Consider using Firefox, Safari or Opera instead.
There is a possibility that the RAM you installed may be a cause. See what happens when you install the original RAM.
Try running an Apple hardware Test. That might provide a clue:
http://support.apple.com/en-us/HT201257
Note that an error free AHT is NOT definitive.
Ciao. -
JButtons in JToolbar don't work with JApplet- why?
I made a JApplet which has a toolbar, populated with burrons that manipulate data from text files. The programs works perfectly when it is not a JApplet. However, once I converted it to a JApplet it does nothing. The code was exactly the same, but, pressing buttons does nothing when it is an applet. here is the complete code;
import java.io.*;
import javax.swing.*;
import java.awt.*;
import java.util.*;
import java.awt.event.*;
public class CSE extends JApplet implements ActionListener, ItemListener
//GUI COMPONENTS
//ToolBar components
JToolBar mainSelect = new JToolBar("Materials");
JButton materials;
String materialNames[] = {"Fur Square", "Bolt of Linen", "Bolt of Damask", "Bolt of Silk", "Glob of Ectoplasm", "Steel Ingot", "Deldrimor Steel Ingot", "Monstrous Claw", "Monstrous Eye", "Monstrous Fang", "Ruby", "Lump of Charcoal", "Obsidian Shard", "Tempered Glass Vial", "Leather Square", "Elonian Leather Square", "Vial of Ink", "Roll of Parchment", "Roll of Vellum", "Spiritwood Plank", "Amber Chunk", "Jadeite Shard"};
ImageIcon materialIcons;
//Graphic components
JDesktopPane mainGraph = new JDesktopPane();
JPanel dailyGraph = new JPanel();
JPanel weeklyGraph = new JPanel();
JPanel finalPrices = new JPanel();
Box graphs = Box.createHorizontalBox();
//The Console
JFrame CSEFrame = new JFrame();
JSplitPane mainConsoleBackdrop = new JSplitPane(JSplitPane.VERTICAL_SPLIT);
JSplitPane dataOut = new JSplitPane(JSplitPane.HORIZONTAL_SPLIT);
JTextArea prediction = new JTextArea(10,10);
JScrollPane predictionScroll;
Box finalPricesLabels = Box.createVerticalBox();
Box finalPricesLay = Box.createVerticalBox();
JLabel finalBuy = new JLabel("Net Buy Price Change: 0.00");
JLabel finalSell = new JLabel("Net Sell Price Change: 0.00");
JLabel buySell = new JLabel("We recommend you: N/A");
JTextArea priceUpdate = new JTextArea(10, 10);
JTextArea priceUpdateWeekly = new JTextArea(10, 10);
JScrollPane priceUScrollW;
JScrollPane priceUScroll;
JCheckBox weeklySelect = new JCheckBox("To show weekly price changes.", false);
JCheckBox dailySelect = new JCheckBox("To show daily price changes.", true);
ButtonGroup dataToShow = new ButtonGroup();
//COMPONENTS FOR DATE; OBTAINING CORRECT FOLDER
String days[] = {"Monday", "Tuesday", "Wednesday", "Thursday", "Friday", "Saturday", "Sunday"};
Calendar calSource = new GregorianCalendar(TimeZone.getTimeZone("GMT"));
int day = calSource.get(Calendar.DAY_OF_MONTH);
int month = calSource.get(Calendar.MONTH);
int year = calSource.get(Calendar.YEAR);
int monthCheck [] = {Calendar.JANUARY, Calendar.FEBRUARY, Calendar.MARCH, Calendar.APRIL, Calendar.MAY, Calendar.JUNE, Calendar.JULY, Calendar.AUGUST, Calendar.SEPTEMBER, Calendar.OCTOBER, Calendar.NOVEMBER, Calendar.DECEMBER};
int dayS = day;
int monthS = month;
int yearS = year;
//if there is file found
boolean proceed = false;
//int data for analysis
int buyPrice;
int currentBuyPrice;
int sellPrice;
int currentSellPrice;
boolean weekly = false;
//tools for parsing and decoding input
String inputS = null;
String s = null;
Scanner [] week = new Scanner[7];
Scanner scanner;
int position = 0;
//weekly tools
String weekPos[] = {"Seventh", "Sixth", "Fifth", "Fourth", "Third", "Second", "First"};
int dayOfWeek = 0; //0 = 7 1 = 6...
public JButton getToolBarButton(String s)
String imgLoc = "TBar Icons/" +s +".gif";
java.net.URL imgURL = CSE.class.getResource(imgLoc);
JButton button = new JButton();
button.setActionCommand(s);
button.setToolTipText(s);
button.addActionListener(this);
if(imgURL != null)
button.setIcon(new ImageIcon(imgURL, s));
else
button.setText(s);
System.err.println("Couldn't find; " +imgLoc);
return button;
public CSE()
// super("Test CSE");
//CSEFrame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
for(int x=0; x<materialNames.length; x++)
materials = getToolBarButton(materialNames[x]);
mainSelect.add(materials);
//checkBoxes
dataToShow.add(weeklySelect);
dataToShow.add(dailySelect);
weeklySelect.addItemListener(this);
dailySelect.addItemListener(this);
// sizes
setSize(850, 850);
//colors and fonts
weeklyGraph.setBackground(new Color(250, 30, 40));
dailyGraph.setBackground(new Color(100, 40, 200));
//text Manip.
prediction.setLineWrap(true);
priceUpdate.setLineWrap(true);
//scrolling
predictionScroll = new JScrollPane(prediction, JScrollPane.VERTICAL_SCROLLBAR_AS_NEEDED, JScrollPane.HORIZONTAL_SCROLLBAR_AS_NEEDED);
priceUScroll = new JScrollPane(priceUpdate, JScrollPane.VERTICAL_SCROLLBAR_AS_NEEDED, JScrollPane.HORIZONTAL_SCROLLBAR_AS_NEEDED);
priceUScrollW = new JScrollPane(priceUpdateWeekly, JScrollPane.VERTICAL_SCROLLBAR_AS_NEEDED, JScrollPane.HORIZONTAL_SCROLLBAR_AS_NEEDED);
//main splitpane config.
mainConsoleBackdrop.setOneTouchExpandable(true);
mainConsoleBackdrop.setResizeWeight(.85);
//placement and Layout
//GraphLayout
graphs.add(Box.createHorizontalStrut(10));
graphs.add(dailyGraph);
graphs.add(Box.createHorizontalStrut(10));
graphs.add(weeklyGraph);
graphs.add(Box.createHorizontalStrut(10));
dataOut.setRightComponent(predictionScroll);
//consoleData layout
finalPricesLabels.add(Box.createVerticalStrut(10));
finalPricesLabels.add(finalBuy);
finalPricesLabels.add(Box.createVerticalStrut(10));
finalPricesLabels.add(finalSell);
finalPricesLabels.add(Box.createVerticalStrut(10));
finalPricesLabels.add(buySell);
finalPricesLay.add(finalPricesLabels);
finalPricesLay.add(Box.createVerticalStrut(10));
finalPricesLay.add(weeklySelect);
finalPricesLay.add(dailySelect);
finalPricesLay.add(priceUScroll);
dataOut.setLeftComponent(finalPricesLay);
mainConsoleBackdrop.setTopComponent(graphs);
mainConsoleBackdrop.setBottomComponent(dataOut);
getContentPane().add(mainConsoleBackdrop);
getContentPane().add(mainSelect, BorderLayout.NORTH);
//visibility
// CSEFrame.setVisible(true);
//return(CSEFrame);
public void actionPerformed(ActionEvent e)
getMonth();
inputS = e.getActionCommand();
FileReader newRead = null;
try {
newRead = new FileReader(monthS +"-" +dayS +"-" +yearS +"/" +inputS +".dat");
proceed = true;
catch(FileNotFoundException f)
System.out.println("File not found");
proceed = false;
if(proceed)
BufferedReader bufferedReader = new BufferedReader(newRead);
scanner = new Scanner(bufferedReader);
scanner.useDelimiter("\n");
//starts daily analysis
getPrice(scanner);
//starts weekly analysis
weekly(inputS);
public void itemStateChanged(ItemEvent e)
if(weeklySelect.isSelected())
priceUpdateWeekly.setText("");
finalPricesLay.remove(priceUScroll);
finalPricesLay.add(priceUScrollW);
finalPrices.updateUI();
else
priceUpdate.setText("");
finalPricesLay.remove(priceUScrollW);
finalPricesLay.add(priceUScroll);
finalPrices.updateUI();
public void weekly(String inputS)
weekly = true;
for(int x = 0; x < 7; x++)
dateToUse(month, day, year, (x+1));
try
FileReader weeklySource = new FileReader(monthS +"-" +dayS +"-" +year +"/" +inputS +".dat");
BufferedReader weeklyBuffer = new BufferedReader(weeklySource);
week[x] = new Scanner(weeklyBuffer);
week[x].useDelimiter("\n");
getPrice(week[x]);
catch(FileNotFoundException f)
JOptionPane.showMessageDialog(this, "No such weekly files- going back;" +(x+1) +"days");
weekly = false;
dateReset();
public void getPrice(Scanner scanner)
while(scanner.hasNextLine())
//puts into string the next scan token
String s = scanner.next();
//takes the scan toke above and puts it into an editable enviroment
String [] data = s.split("\\s");
for(position = 0; position < data.length; position++)
//Scanner test to make sure loop can finish, otherwise "no such line" error
if(scanner.hasNextLine()==false)
scanner.close();
break;
/*Starts data orignazation by reading from each perspective field
* 1 = day
* 2 = day of month
* 3 = month
* 4 = year
if(position == 0 && weekly == false)
String dayFromFile = data[position];
int dayNum = Integer.parseInt(dayFromFile);
priceUpdate.append(days[dayNum-1] +" ");
else if(position == 1 && weekly == false )
priceUpdate.append(data[position] + "/");
else if(position == 2 && weekly == false)
priceUpdate.append(data[position] + "/");
else if(position == 3 && weekly == false)
priceUpdate.append(data[position] +"\n");
//if it is in [buy] area, it prints and computes
else if(position == 7)
//obtains string for buy price and stores it, then prints it
String buy = data[position];
if(weekly == false)
priceUpdate.append("Buy: " +buy +"\n" );
//converts buy to string
currentBuyPrice = Integer.parseInt(buy);
//eliminates problems caused by no data from server- makes the price 0
if(currentBuyPrice < 0)
currentBuyPrice = 0;
//if it is greater it adds
if(currentBuyPrice > buyPrice)
buyPrice += currentBuyPrice;
//if it is equal [there is no change] then it does nothing
if(currentBuyPrice == buyPrice)
buyPrice +=0;
//if there is a drop, it subtracts
else
buyPrice -= currentBuyPrice;
//if it is in [sell] area, it prints, and resets the position to zero because line is over
else if(position == 8)
//puts sell data into string and prints it
String sell = data[position];
if(weekly == false)
priceUpdate.append("Sell: " + sell +"\n");
//turns sell data into int.
currentSellPrice = Integer.valueOf(sell).intValue();;
//gets rid of problems caused by no data on server side- makes it 0
if(currentSellPrice < 0)
currentSellPrice = 0;
//adds if there is an increase
if(currentSellPrice > sellPrice)
sellPrice += currentSellPrice;
//does nothing if it is the same
if(currentSellPrice == sellPrice)
sellPrice +=0;
//subtracts if there is drop
else
sellPrice -= currentSellPrice;
//further protection against "No such line" and moves it down
if(scanner.hasNextLine() == true)
scanner.nextLine();
//if scanner is finished, prints out all lines
if(scanner.hasNextLine() == false && weekly == false)
finalBuy.setText("Net Buy Price Change: "+buyPrice);
finalSell.setText("Net Sell Price Change: " +sellPrice);
buyPrice = 0;
sellPrice = 0;
position = data.length;
else if(scanner.hasNextLine() == false && weekly == true)
priceUpdateWeekly.append("\n" +weekPos[dayOfWeek] +" day of the week ended with; \nBuy Price;" +buyPrice +"\nSell Price;" +sellPrice);
buyPrice = 0;
sellPrice = 0;
position = data.length;
dayOfWeek++;
if(dayOfWeek > 6)
dayOfWeek = 0;
public void getMonth()
for(int x=0; x < monthCheck.length; x++)
if(month == monthCheck[x])
monthS = (x+1);
x = monthCheck.length;
public void dateToUse(int month, int day, int year, int increment)
//set day of source
dayS = (day - increment);
//if day of source is less then O then we have moved to another month
if(dayS <= 0)
//checks the difference between how much we have incremented and the day we have started; this tells us how far into the new month we are
int incrementDay = increment - day;
//decrements month
monthS--;
//if month is less then zero, then we have moved into another year and month has become 12
if(monthS <= 0)
yearS--;
monthS = 12;
//the following looks at the current month and if it goes below it assigns the day to the proper ammount of days of the month before minus the days into the month
if(month == 3)
dayS = 28 - incrementDay;
else if(month == 5 || month == 7)
dayS = 29 - incrementDay;
else if(month == 2 || month == 4 || month == 6 || month == 9 || month == 11)
dayS = 31 - incrementDay;
else
dayS = 30 - incrementDay;
//resets the source date to the current date once data from the week has been reached
public void dateReset()
dayS = day;
monthS = month;
yearS = year;
public void init()
//JFrame frame = new CSEFrameSet();
// this.setContentPane(CSEFrameSet());
CSE aCSE = new CSE();
public static void main(String [] args)
CSE cs = new CSE();
}I have tried uploading it to a server, running it from appletviewer, and locally using the .HTML file. The GUI works fine, everything is there, however, pressing the buttons does nothing.
Can you not use the Scanners and such with JApplets?
Yes, the directories are good.
EDIT EDIT EDIT; OK, it works with appletviewer, but still doesn't work when it is published.
Message waI can't seem to edit the post anymore, here it is again;
import java.io.*;
import javax.swing.*;
import java.awt.*;
import java.util.*;
import java.awt.event.*;
public class CSE extends JApplet implements ActionListener, ItemListener
//GUI COMPONENTS
//ToolBar components
JToolBar mainSelect = new JToolBar("Materials");
JButton materials;
String materialNames[] = {"Fur Square", "Bolt of Linen", "Bolt of Damask", "Bolt of Silk", "Glob of Ectoplasm", "Steel Ingot", "Deldrimor Steel Ingot", "Monstrous Claw", "Monstrous Eye", "Monstrous Fang", "Ruby", "Lump of Charcoal", "Obsidian Shard", "Tempered Glass Vial", "Leather Square", "Elonian Leather Square", "Vial of Ink", "Roll of Parchment", "Roll of Vellum", "Spiritwood Plank", "Amber Chunk", "Jadeite Shard"};
ImageIcon materialIcons;
//Graphic components
JDesktopPane mainGraph = new JDesktopPane();
JPanel dailyGraph = new JPanel();
JPanel weeklyGraph = new JPanel();
JPanel finalPrices = new JPanel();
Box graphs = Box.createHorizontalBox();
//The Console
JFrame CSEFrame = new JFrame();
JSplitPane mainConsoleBackdrop = new JSplitPane(JSplitPane.VERTICAL_SPLIT);
JSplitPane dataOut = new JSplitPane(JSplitPane.HORIZONTAL_SPLIT);
JTextArea prediction = new JTextArea(10,10);
JScrollPane predictionScroll;
Box finalPricesLabels = Box.createVerticalBox();
Box finalPricesLay = Box.createVerticalBox();
JLabel finalBuy = new JLabel("Net Buy Price Change: 0.00");
JLabel finalSell = new JLabel("Net Sell Price Change: 0.00");
JLabel buySell = new JLabel("We recommend you: N/A");
JTextArea priceUpdate = new JTextArea(10, 10);
JTextArea priceUpdateWeekly = new JTextArea(10, 10);
JScrollPane priceUScrollW;
JScrollPane priceUScroll;
JCheckBox weeklySelect = new JCheckBox("To show weekly price changes.", false);
JCheckBox dailySelect = new JCheckBox("To show daily price changes.", true);
ButtonGroup dataToShow = new ButtonGroup();
//COMPONENTS FOR DATE; OBTAINING CORRECT FOLDER
String days[] = {"Monday", "Tuesday", "Wednesday", "Thursday", "Friday", "Saturday", "Sunday"};
Calendar calSource = new GregorianCalendar(TimeZone.getTimeZone("GMT"));
int day = calSource.get(Calendar.DAY_OF_MONTH);
int month = calSource.get(Calendar.MONTH);
int year = calSource.get(Calendar.YEAR);
int monthCheck [] = {Calendar.JANUARY, Calendar.FEBRUARY, Calendar.MARCH, Calendar.APRIL, Calendar.MAY, Calendar.JUNE, Calendar.JULY, Calendar.AUGUST, Calendar.SEPTEMBER, Calendar.OCTOBER, Calendar.NOVEMBER, Calendar.DECEMBER};
int dayS = day;
int monthS = month;
int yearS = year;
//if there is file found
boolean proceed = false;
//int data for analysis
int buyPrice;
int currentBuyPrice;
int sellPrice;
int currentSellPrice;
boolean weekly = false;
//tools for parsing and decoding input
String inputS = null;
String s = null;
Scanner [] week = new Scanner[7];
Scanner scanner;
int position = 0;
//weekly tools
String weekPos[] = {"Seventh", "Sixth", "Fifth", "Fourth", "Third", "Second", "First"};
int dayOfWeek = 0; //0 = 7 1 = 6...
public JButton getToolBarButton(String s)
String imgLoc = "TBar Icons/" +s +".gif";
java.net.URL imgURL = CSE.class.getResource(imgLoc);
JButton button = new JButton();
button.setActionCommand(s);
button.setToolTipText(s);
button.addActionListener(this);
if(imgURL != null)
button.setIcon(new ImageIcon(imgURL, s));
else
button.setText(s);
System.err.println("Couldn't find; " +imgLoc);
return button;
public CSE()
// super("Test CSE");
//CSEFrame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
for(int x=0; x<materialNames.length; x++)
materials = getToolBarButton(materialNames[x]);
mainSelect.add(materials);
//checkBoxes
dataToShow.add(weeklySelect);
dataToShow.add(dailySelect);
weeklySelect.addItemListener(this);
dailySelect.addItemListener(this);
// sizes
setSize(850, 850);
//colors and fonts
weeklyGraph.setBackground(new Color(250, 30, 40));
dailyGraph.setBackground(new Color(100, 40, 200));
//text Manip.
prediction.setLineWrap(true);
priceUpdate.setLineWrap(true);
//scrolling
predictionScroll = new JScrollPane(prediction, JScrollPane.VERTICAL_SCROLLBAR_AS_NEEDED, JScrollPane.HORIZONTAL_SCROLLBAR_AS_NEEDED);
priceUScroll = new JScrollPane(priceUpdate, JScrollPane.VERTICAL_SCROLLBAR_AS_NEEDED, JScrollPane.HORIZONTAL_SCROLLBAR_AS_NEEDED);
priceUScrollW = new JScrollPane(priceUpdateWeekly, JScrollPane.VERTICAL_SCROLLBAR_AS_NEEDED, JScrollPane.HORIZONTAL_SCROLLBAR_AS_NEEDED);
//main splitpane config.
mainConsoleBackdrop.setOneTouchExpandable(true);
mainConsoleBackdrop.setResizeWeight(.85);
//placement and Layout
//GraphLayout
graphs.add(Box.createHorizontalStrut(10));
graphs.add(dailyGraph);
graphs.add(Box.createHorizontalStrut(10));
graphs.add(weeklyGraph);
graphs.add(Box.createHorizontalStrut(10));
dataOut.setRightComponent(predictionScroll);
//consoleData layout
finalPricesLabels.add(Box.createVerticalStrut(10));
finalPricesLabels.add(finalBuy);
finalPricesLabels.add(Box.createVerticalStrut(10));
finalPricesLabels.add(finalSell);
finalPricesLabels.add(Box.createVerticalStrut(10));
finalPricesLabels.add(buySell);
finalPricesLay.add(finalPricesLabels);
finalPricesLay.add(Box.createVerticalStrut(10));
finalPricesLay.add(weeklySelect);
finalPricesLay.add(dailySelect);
finalPricesLay.add(priceUScroll);
dataOut.setLeftComponent(finalPricesLay);
mainConsoleBackdrop.setTopComponent(graphs);
mainConsoleBackdrop.setBottomComponent(dataOut);
getContentPane().add(mainConsoleBackdrop);
getContentPane().add(mainSelect, BorderLayout.NORTH);
//visibility
// CSEFrame.setVisible(true);
//return(CSEFrame);
public void actionPerformed(ActionEvent e)
getMonth();
inputS = e.getActionCommand();
FileReader newRead = null;
try {
newRead = new FileReader(monthS +"-" +dayS +"-" +yearS +"/" +inputS +".dat");
proceed = true;
catch(FileNotFoundException f)
System.out.println("File not found");
proceed = false;
if(proceed)
BufferedReader bufferedReader = new BufferedReader(newRead);
scanner = new Scanner(bufferedReader);
scanner.useDelimiter("\n");
//starts daily analysis
getPrice(scanner);
//starts weekly analysis
weekly(inputS);
public void itemStateChanged(ItemEvent e)
if(weeklySelect.isSelected())
priceUpdateWeekly.setText("");
finalPricesLay.remove(priceUScroll);
finalPricesLay.add(priceUScrollW);
finalPrices.updateUI();
else
priceUpdate.setText("");
finalPricesLay.remove(priceUScrollW);
finalPricesLay.add(priceUScroll);
finalPrices.updateUI();
public void weekly(String inputS)
weekly = true;
for(int x = 0; x >< 7; x++)
dateToUse(month, day, year, (x+1));
try
FileReader weeklySource = new FileReader(monthS +"-" +dayS +"-" +year +"/" +inputS +".dat");
BufferedReader weeklyBuffer = new BufferedReader(weeklySource);
week[x] = new Scanner(weeklyBuffer);
week[x].useDelimiter("\n");
getPrice(week[x]);
catch(FileNotFoundException f)
JOptionPane.showMessageDialog(this, "No such weekly files- going back;" +(x+1) +"days");
weekly = false;
dateReset();
public void getPrice(Scanner scanner)
while(scanner.hasNextLine())
//puts into string the next scan token
String s = scanner.next();
//takes the scan toke above and puts it into an editable enviroment
String [] data = s.split("\\s");
for(position = 0; position < data.length; position++)
//Scanner test to make sure loop can finish, otherwise "no such line" error
if(scanner.hasNextLine()==false)
scanner.close();
break;
/*Starts data orignazation by reading from each perspective field
* 1 = day
* 2 = day of month
* 3 = month
* 4 = year
if(position == 0 && weekly == false)
String dayFromFile = data[position];
int dayNum = Integer.parseInt(dayFromFile);
priceUpdate.append(days[dayNum-1] +" ");
else if(position == 1 && weekly == false )
priceUpdate.append(data[position] + "/");
else if(position == 2 && weekly == false)
priceUpdate.append(data[position] + "/");
else if(position == 3 && weekly == false)
priceUpdate.append(data[position] +"\n");
//if it is in [buy] area, it prints and computes
else if(position == 7)
//obtains string for buy price and stores it, then prints it
String buy = data[position];
if(weekly == false)
priceUpdate.append("Buy: " +buy +"\n" );
//converts buy to string
currentBuyPrice = Integer.parseInt(buy);
//eliminates problems caused by no data from server- makes the price 0
if(currentBuyPrice < 0)
currentBuyPrice = 0;
//if it is greater it adds
if(currentBuyPrice > buyPrice)
buyPrice += currentBuyPrice;
//if it is equal [there is no change] then it does nothing
if(currentBuyPrice == buyPrice)
buyPrice +=0;
//if there is a drop, it subtracts
else
buyPrice -= currentBuyPrice;
//if it is in [sell] area, it prints, and resets the position to zero because line is over
else if(position == 8)
//puts sell data into string and prints it
String sell = data[position];
if(weekly == false)
priceUpdate.append("Sell: " + sell +"\n");
//turns sell data into int.
currentSellPrice = Integer.valueOf(sell).intValue();;
//gets rid of problems caused by no data on server side- makes it 0
if(currentSellPrice < 0)
currentSellPrice = 0;
//adds if there is an increase
if(currentSellPrice > sellPrice)
sellPrice += currentSellPrice;
//does nothing if it is the same
if(currentSellPrice == sellPrice)
sellPrice +=0;
//subtracts if there is drop
else
sellPrice -= currentSellPrice;
//further protection against "No such line" and moves it down
if(scanner.hasNextLine() == true)
scanner.nextLine();
//if scanner is finished, prints out all lines
if(scanner.hasNextLine() == false && weekly == false)
finalBuy.setText("Net Buy Price Change: "+buyPrice);
finalSell.setText("Net Sell Price Change: " +sellPrice);
buyPrice = 0;
sellPrice = 0;
position = data.length;
else if(scanner.hasNextLine() == false && weekly == true)
priceUpdateWeekly.append("\n" +weekPos[dayOfWeek] +" day of the week ended with; \nBuy Price;" +buyPrice +"\nSell Price;" +sellPrice);
buyPrice = 0;
sellPrice = 0;
position = data.length;
dayOfWeek++;
if(dayOfWeek > 6)
dayOfWeek = 0;
public void getMonth()
for(int x=0; x < monthCheck.length; x++)
if(month == monthCheck[x])
monthS = (x+1);
x = monthCheck.length;
public void dateToUse(int month, int day, int year, int increment)
//set day of source
dayS = (day - increment);
//if day of source is less then O then we have moved to another month
if(dayS <= 0)
//checks the difference between how much we have incremented and the day we have started; this tells us how far into the new month we are
int incrementDay = increment - day;
//decrements month
monthS--;
//if month is less then zero, then we have moved into another year and month has become 12
if(monthS <= 0)
yearS--;
monthS = 12;
//the following looks at the current month and if it goes below it assigns the day to the proper ammount of days of the month before minus the days into the month
if(month == 3)
dayS = 28 - incrementDay;
else if(month == 5 || month == 7)
dayS = 29 - incrementDay;
else if(month == 2 || month == 4 || month == 6 || month == 9 || month == 11)
dayS = 31 - incrementDay;
else
dayS = 30 - incrementDay;
//resets the source date to the current date once data from the week has been reached
public void dateReset()
dayS = day;
monthS = month;
yearS = year;
public void init()
//JFrame frame = new CSEFrameSet();
// this.setContentPane(CSEFrameSet());
CSE aCSE = new CSE();
public static void main(String [] args)
CSE cs = new CSE();
}Message was edited by:
Cybergasm
Maybe you are looking for
-
Error when connecting Adobe Form with PayPal
We are trying to integrate an Adobe Form into a PayPal purchase so that after a customer has purchased something, they are directed to a form to enter some personlization information. However, it seems that the link is getting changed in the process
-
Multiple Printers on One Account
I have an hpeprint account. May I attach more than one hp eprint enabled to it. As well, will I be able to choose which printer to print from?
-
Hi, Clien having 2 company.So both the company have Plant sale,Depot sale & Export Sale .Then I have to define 6- different types of sales doc types & 6- different types of document pricing procedure & 6- different pricing procedure in each busine
-
Tools to list classes used in the project/
Hi is there any tool that would list all the classes and packages used in my project. the tools must be something like getting input as a main class and list all the other classes used in the project. ? -- MJ
-
Not able to deploy mapping from one schema location to another
When I am trying to deploy a mapping from a source schema to another target schema, i am not able to do so even though the deployment of the connector is also successfull. Can somebody help in this regards. Thanks.