October CPU and PSU patches for oracle Database and application

Hi experts,
Linux-X86_64
Datbase - 11.2.0.3.0
Application - 12.1.3
Can any one provide Patch Number for Cpu and Psu patch numbers for above versions(Oct 2014).
regards,
prathap

You can also refer MOS note:
Patch Set Update and Critical Patch Update October 2014 Availability Document (Doc ID 1912224.1)
thanks

Similar Messages

Recommended Third Party Archive and Purging Software for Oracle Database (Oracle CC&B)

Hi,
We are currently exploring third party archive and purging software for Oracle Database specifically used by an Oracle Customer Care and Billing implementation. Our current data is growing that we think archiving and purging is a now a viable option. Thanks.
Regards,
Dennis

According to the fine Oracle® Utilities Application Framework Administration Guide Chapter 17, "Archiving and Purging" is readily available to CC&B.

For oracle database and websphere on LINUX

Hi
All,
I have installled Oracle database 10.2.0.3 on AIX server and Application will be hosted on websphere on LINUX.
Now I don't know what are the things require to connect with oracle database from websphere application on LINUX.. for example .. connection string , driver etc..
any help will be appreciated.
Thanks,
Vishal

Already answered at the dup post --> Re: For Oracle Database and WEbsphere
~ Madrid
http://hrivera99.blogspot.com

Solaris 10 patches for Oracle Database 11gR2

Hi,
I downloaded Oracle Solaris 10 s/w from e-Delivery and got it installed. For Oracle Database 11gR2 I also need the followging patches:
120754-06: SunOS 5.10_x86 libmtsk
119961-05: SunOS 5.10_x86: Assembler
119964-14: SunOS 5.10_x86 Shared library patch for C++_x86
Though we have access to MyOracleSupport we can only download s/w patches using our support contract with Oracle and not OS patches.
Is there any other way I can get these patches.
Rgds,
Thiru.

Thiru,
You won't find the patches in the patches/ directory on the DVD or the ISO image. Oracle integrates the patches directly into the packages, so there is no need to provide or install them separately.
All patches have a patch number (e.g. 120754) and a revision (e.g. 06). A newer revision of a patch always contains all fixes of the previous revisions. So try to run "showrev -p | grep 120754" instead, and you'll see that patch 120754-08 is pre-installed. As revision 08 is newer/higher than 06, the patch requirement is satisfied.
Hope that helps,
mp.

Compression for oracle database and index compression during import of data

Hi All,
I have a query , in order to import into oracle database and also have compression and index compression , do we have some kind of load args for r3load and also do we have to change the tpl file ?

Hello guy,
I did this kind of compression within migration project before.
I performed index compress first and then export -> import with table compress.
One thing you should take care, delete nocompress flag from TARGET.SQL (created by program SMIGR_CREATE_DDL, program SMIGR_CREATE_DDL created pure non-compression objects for these considered non-standard tables). For table columns > 255, we should not delete this flag.
Regarding to the index compress in source system, please check the following notes:
Note 1464156 - Support for index compression in BRSPACE 7.20
Note 1109743 - Use of Index Key Compression for Oracle Databases
Note 682926 - Composite SAP note: Problems with "create/rebuild index"
Best Regards,
Ning Tong

Trying to add oinstall and dba (for Oracle Database and Enterprise Manager) to my LDAP account

I want to add groups to my LDAP user account abc. Currently I have uid=243782(abc) gid=10(wheel) groups=1275(nsn-emp),9834(nsn-moh),10(wheel), but I want groups oinstall, oper and dba added.
According to the database installation document, local os group must include oinstall and dba.
The following local operating system groups and users are required if you are
installing Oracle Database:
■ The Oracle Inventory group (typically, oinstall)
■ The OSDBA group (typically, dba)
■ The Oracle software owner (typically, oracle)
I tried to add abc groups oinstall and dba using root user, but it failed.
Could you please inform me how to add these groups?
Thanks.
lf

Folks,
Hello. Thanks a lot for replying. I do the following command: [user@localhost bin]$ wget http://localhost.localdomain:1158/em
The command returns the message:
--11:36:33-- http://localhost.localdomain:1158/em
Resolving localhost.localdomain... 127.0.0.1
Connecting to localhost.localdomain|127.0.0.1|:1158... connected.
HTTP request sent, awaiting response... 200 No headers, assuming HTTP/0.9
Length: unspecified
Saving to: `em'
[ <=> ] 7 --.-K/s in 0.002s
11:36:33 (4.15 KB/s) - Read error at byte 7 (Connection reset by peer).Retrying.
--11:36:34-- (try: 2) http://localhost.localdomain:1158/em
Connecting to localhost.localdomain|127.0.0.1|:1158... connected.
HTTP request sent, awaiting response... 200 No headers, assuming HTTP/0.9
Length: unspecified
Saving to: `em.1'
100%[=================================================================================================================>] 7 --.-K/s in 0s
11:36:34 (16.8 KB/s) - Read error at byte 7 (Connection reset by peer).Retrying.
The above message repeats again and again until finally returns the following message:
11:39:02 (40.2 KB/s) - Read error at byte 7 (Connection reset by peer).Giving up.
In browser, http://localhost.localdomain:1158/em cannot display and pop up a Windows with the message: You have chosen to open whicn is BIN file from http://localhost.localdomain:1158 What sholud FireFox do with this file ? Save to Disk ?
My question is:
I don't know how to display http://localhost.localdomain:1158/em in Browser. How to solve the issue ?
Thanks.

For Oracle Database and WEbsphere

Hi
All,
I have installled Oracle database 10.2.0.3 on AIX server and Application will be hosted on websphere on LINUX.
Now I don't know what are the things require to connect with oracle database from websphere application on LINUX.. for example .. connection string , driver etc..
any help will be appreciated.
Thanks,
Vishal

You may want to start here --> Configuring WebSphere Portal for Oracle.
~ Madrid
http://hrivera99.blogspot.com

Where should one install Oracle Database and the Grid Infrastructure in order to adhere to OFA?

I've downloaded the two zipped install folders for Oracle Database, and the two zipped install folders for the Grid Infrastructure. The book I'm following for installation says to use one directory for the database, and one directory for the Grid Infrastructure, but it doesn't explain where they should be located in OFA. Presumably they should both end up somewhere in the same Oracle Base (since everything Oracle related on a single file system should go in the same base, according to my understanding), but it isn't clear where they should be installed in relation to each other. For example, is the Grid Infrastructure a separate product that gets its own Oracle Home? Can anyone shed light on this process?
Also, does it matter to which location the zipped files are unzipped? For example, are any of these files used after the installation process, or does OFA only care about post-installation location?

I think this links may be helpful -- ORACLE-BASE - Oracle Database 11g Release 2 RAC On Oracle Linux 5.8 Using VirtualBox, http://www.oracle.com/technetwork/articles/hunter-rac11gr2-iscsi-088677.html.
OFA -- Optimal Flexible Architecture standard. The standard is a set of configuration guidelines created to ensure well organized Oracle installations that are easier to maintain (http://docs.oracle.com/cd/B28359_01/install.111/b32002/app_ofa.htm#LADBI440).
It relates to location of the grid and dbms files location. Actually you should specify base directory and follow installer. System will be installed in correct directories.
It does not matter where you will unzip your distributives. You may delete them after installation to free space.

What kind of storage we should use for oracle database?

Hi
thank you for reading my post
Can some one please explain what kind of hardware storage is common for oracle database, and kindly please provide some explanations about the reason that we can use such storage?

Perhaps you're thinking about RAID, an acronym for Redundant Array of Inexpensive Disks? That's not specific to Oracle by any means, it's a very common way of setting up multiple disks in a server so that the failure of one or two disks doesn't cause the system to lose any data. If you're dealing with a server of any size or any sort of SAN or NAS device, it is going to use RAID, the question is which form of RAID (there are different sorts of configurations with different levels of cost, performance, and durability).
Justin
orafad was a faster typist than I.
Message was edited by:
Justin Cave

LDOM for Oracle database

We have T5440. We will be creating 5 LDOMS on this. Each LDOM will host Oracle database server. This is for functional testing purpose only. No performance test will be performed on this setup.
Four ISCSI LUNs (500 GB each) are attached to this machine. Our system administrator has created two zpool for these LUNS. Each machine will be given two virtual disk (one for data and one for OS) from these zpool.
Write cache will not be disabled at scsi level or at zpool level or even at guest OS filesystem (UFS) level.
My question - Is this the right way to configure disks for LDOMs running oracle database? [I know we will not be performing any performance test but oracle database server running on these machines should be usable enough]
Thanks
--D

Already answered at the dup post --> Re: For Oracle Database and WEbsphere
~ Madrid
http://hrivera99.blogspot.com

OCCI for Oracle 9i and MS Visual Studio 2005

Hello.
Where do I get OCCI *.lib and *.dll files for Oracle 9i and MS Visual Studio 2005 (VC 8)?
Roman Perepelitsa.

I was able to use MS Visual Studio 2005 and OCCi classes. There is a catch though, I was not able to use the debug library dll as it will crash. So I was not able to debug any code using the VS debugger, instead, I use the old and lengthy process: insert printf statements.
Jeff

Queries on CPU and PSU Patches

We are on 11.5.10.2 and 10.2.0.4.We need to apply CPU and PSU patches.
1.When we apply the latest CPU patch does it mean it will apply all previous cpu patches on Both application and DB.
Means does it mean CPU's are cumulative.
2.What is PSU patch and what is difference between cpu and psu.When we apply latest psu will it apply latest cpu patch as well.
Please provide the latest CPU and psu note no. which includes Patches as well.

Please search the forum before posting similar questions as this topic was discussed many times.
We are on 11.5.10.2 and 10.2.0.4.We need to apply CPU and PSU patches.
1.When we apply the latest CPU patch does it mean it will apply all previous cpu patches on Both application and DB.
Means does it mean CPU's are cumulative.Please see this link.
Switching to Cumulative Critical Patch Updates for E-Business Suite 11i
http://blogs.oracle.com/stevenChan/2010/01/cumulative_ebs_cpu.html
2.What is PSU patch and what is difference between cpu and psu.When we apply latest psu will it apply latest cpu patch as well.Can E-Business Users Apply Database Patch Set Updates?
http://blogs.oracle.com/stevenChan/2009/08/can_ebs_users_apply_database_patch_set_updates.html
cpu and psu
Re: CPU/PSU
PSU Vs CPU
Difference b/w CPU and PSU
Please provide the latest CPU and psu note no. which includes Patches as well.Critical Patch Update for January 2011 Now Available
http://blogs.oracle.com/stevenChan/2011/01/cpu_jan_2011.html
Thanks,
Hussein

Current Patch Set for Oracle Database Release 11.2

Hi
I am upgrading oracle 10G to 11GR2 in AIX 5.3 Environment with SAP ECC6 , I have just just installled Oracle 11.2.0.1.0 according to the "Database Upgrade Guide -Upgrade to Oracle Database 11g Release 2 (11.2): UNIX". After database software installation , in upgrade manual in section 3.4.4 it says, you need to install current patch set for oracle database 11g R2 and referencing a SAP note 1431799.
I have just read note 1431799 which says Current Patch Set for Oracle Database Release 11.2 is not generally available for SAP customers until December 2010, also I donu2019t find the note 1522330 as mentioned in 1431799.
Please let me know how I can get current patch set to apply with Oracle 11.2.0.1.0 (Is it in SAP service market place?)
I also want to upgrade my installation to oracle 11.2.0.2, please let me know where I get the patch set to upgrade from 11.2.0.1.0 to 11.2.0.2,
or
I have to live with 11.2.0.1.0 and apply SAP Bundle Patch ( SBP)

Abu Al MAmun,
I understand from your posts that you recently upgraded to 11.2.0.2.
I am having the same difficulty, of finding the current patch set for 11.2. Could you please let me know how you worked around it?
Thanks,
Siri
Hello Everyone,
I did read the post on to how you have to install the current patch set for 11.2.
But honestly, it pretty much flew over my head.
I am trying to upgrade our SAP AIX 64 bit test system from Oracle 10.2.0.4 to 11.2.0.2.
And so far I have downloaded all the required sw for the upgrade, except for the current patch set 11.2.
This is what I have right now:
1) Oracle 11.2 AIX 64 bit upgrade sw - 51038805_part 1 to 51038805_part 7 and 51039800.
2) Database Patches -->Oracle 11.2.0.2 -->
All they have here is
a. Database RDMBS - SAP_112020_201012_AIX.zip and b. SAP_112020_201101_AIX.zip
b. OPatch - OPatch_11201_Generic_v3.zip and mopatch-2_1_6.zip
c. Database Vault - DV - >Generic - p9656644_112020_Generic.zip
If I am not wrong, the Database RDBMS files are nothing but the SAP Bundle Patches that have to be installed after installing the currrent patch set 11.2.0.2 using MOPatch.
But I did not find the currrent patch set 11.2.0.2.
Could someone please explain the process to me in detail? This being my first time , I am finding it a bit hard to catch up with some of the stuff.
Thank You!
Siri

[Blog] Using VMware vROPs to monitor Oracle Database and WebLogic. Management Pack for Oracle EM, Hyperic Plugins, or Both?

This blog post provides a suggested methodology for helping users of VMware vROps/vCOps decide which of the existing solutions, the vROps Management Pack for Oracle EM and the VMware vROps Hyperic Plugins for Oracle, should be used to monitor their Oracle workloads.
It’s been a nearly a year since VMware transferred the vCOps Adapter for Oracle Enterprise Manager (OEM) to Blue Medora and since that transfer Blue Medora has released a number of major updates as well as rebranded it the Blue Medora vROps Management Pack for Oracle EM. Over that same period of time VMware has continued to evolve their Oracle-focused (Oracle Database and WebLogic J2EE) Hyperic agent-based plugins culminating most recently with a October 2014 update to the Oracle Database plugin that provides support for Oracle Database 12c.
vROps for Oracle Database - Management Pack vs Hyperic comparison
Read the rest here.

can you also post 28,000 more lines? I'm sure this will be helpful....

CPU Patch for oracle 9.2.0.4

Hi,
I am working in oracle 9.2.0.4 .I need the CPU patch for this oracle version 9.2.0.4.
Please provide me the steps for patch updation.....
Rgds,,,,

Check
Critical Patch Update Availability Information for Oracle Server and Middleware Products (CPUOct2007)
Doc ID: Note:455287.1
Accoring to CPU rule, not availalbe for 9.2.0.4, need to patch your DB to 9.2.0.8 the latest patchset of the release.

October CPU and PSU patches for oracle Database and application

Similar Messages

Maybe you are looking for