OCX Error after 256MB of FLV have loaded

I've noticed that whenever a progressive FLV over 256MB in
size is loaded into the FLVPlayback component I get an OCX error in
IE and FF on Windows (although FF doesn't specifically say 'OCX
Error'). This seems to happen right around the point where 256MB
have loaded and does not occur on the Mac at all so I suspect it's
related to ActiveX in particular. This is extremely dismal for the
project I'm working on and does not occur when using the MX FLV
components.
Any help would be appreciated...

Check your system tablespace or your portal30 default tablespace. You may have run out of space at that particular point in the install. I have had a similar problem where the install says 100% complete but it really did not run to completion due to running out of space in my system tablespace. You should have approximately 2300+ objects in Portal30 schema after a successfull install.
Good luck!
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by sameer:
Hello !
I am trying to intall oracle portal with oracle 8.1.7 .
Every thing goes fine . But after the 100% installation of oracle portal , it gives the following error :
SSOHash class has not been loaded and
The enabler configuration table(WWSEC_enable_config_info) does not have any entries .
I have run the ssodatan script but that script also giving errors .
Can anyone help !
Regards<HR></BLOCKQUOTE>
null

Similar Messages

Firefox Version 3.6.9 will support Mac OS X 10.8.5, as we are facing network timeout error after some time, we have checked all other settings

Firefox Version 3.6.9 will support Mac OS X 10.8.5, as we are facing network timeout error after some time, we have checked all other settings

We cant upgrade

Flash6.ocx error (after patch)

I have downloaded the uninstaller from adobe, uninstalled,
rebooted, and reinstalled using the current flash player download
from adobe. After I reinstalled, I applied the MS update
(WindowsXP-KB923789-x86-ENU).
I am getting the following error message.
http://img514.imageshack.us/my.php?image=flaerrordx1.jpg
Any ideas? I have installed all windows updates and IE7 with
no luck.

Same here! I am getting really frustrated. The site I am
trying to access is for school, and if I can't use it I can't
graduate. Each time I try to access I get an error message about
Shockwave Flashobject Active X control Flash6.ocx and than the site
shuts down. I have downloaded the patch.I have
uninstalled/reinstalled every adobe product. I have run a repair. I
have purchased an outside product to fix registry errors. If I go
into manage addons I can disable flash6.ocx and that gets me into
the site, but it won't load properly-so its still useless. It won't
let me delete it. BTW, I am running XP home with IE. I have to use
IE (school requirement) but I have tried Firefox and it still won't
work. I would really appreciate any suggestions anyone has. I have
emailed Adobe, but haven't heard back yet.

Possiable fix for errors after rel

After reading heaps of people getting BSOD and errors after a reload I have a thought.
Before you reload, remove the card. Then reload and install all other drivers first like chipset and video.
Now after all this install the card but the drivers yet, just let windows do it thing. After this ( proberly wont install anything ) reboot again. Now install the drivers.
Hope it hel
ps.
I just thought of this after a freinds Lan card would not work after a reload, so i removed it, reloaded then put the card back in and all is fine.

BatteriesNotIncluded: you are the man. your steps worked like a charm for me. for others trying this, I also was having the issue where the restore would just hang half to 3/4 of the way through. there was no error message, and the only way to kill it was to force quit itunes and manually reset the phone.
it was quite a time consuming fix to have to reinstall itunes, but i wish i had known about this before i tried restoring for the 6th time.
thanks again.

After update, Itunes can't load. I get error message R6034, attempt to load the C runtime library incorrectly. I have repeatedly removed and reinstalled Itunes and still have the same problem!!!

After update, Itunes can't load. I get error message R6034, attempt to load the C runtime library incorrectly.
I also get error code 7 (Windows error 1114), saying itunes wasn't installed correctly. It appears that I am not the only one with this issue. what is wrong with the latest update?? I tried removing Itunes and all of its components and installing it again, but get same errors and i have also tried doing a system restore with the same results

Doublechecking. Have you also tried the following user tip?
Troubleshooting issues with iTunes for Windows updates

After installing itunes I get an error that says that I have to unistall and reinstall itunes because I'm missing something but it does not tell me what it is.

After installing itunes on my pc i get an error that says that i have to uninstall and reinstall itunes. I finally got it to down load and now it says that I need an upgrade. It's getting very frustrating as I've never had this kind of trouble.

What is the precise wording of the message that is appearing?
What OS is on the computer?

Receiving error after loading Dreamweaver... In a time crunch ...project deadline... need to identify problem and fix as quickly as possible

Receiving error after loading Dreamweaver... In a time crunch ...project deadline... need to identify problem and fix as quickly as possible
Occurs after I load Dreamweaver; most of the time --- Sometimes not until I try to access CSS Designer
Have screen capture of error (see next page)
Windows 7 Home Premium - Service Pack 1
Platform 64 bit OS
Has worked fine until recently
Have installed one program (Print Artist Platinum 24 by Nova Development)
Tried restore point but not dated back far enough
Uninstalled and reinstalled Dreamweaver CC 2014 from Creative Cloud.. same error
Any Ideas?

Troubleshoot JavaScript errors | Dreamweaver CS4, CS5, CS5.5, CS6
Try step #4 and step #12

I am transfering my stuff from my lap top to my desk top (both Mac). I cannot get my CS4 to open. It gives me a 150:30 error, licencing thing. I have no idea what to do and after hours of searching none of what I found helps. I don't know anything about t

Sorry didn't know that the first step was just supposed to be "subject".
So here it is again.
"I am transfering my stuff from my lap top to my desk top (both Mac). I cannot get my CS4 to open. It gives me a 150:30 error, licencing thing. I have no idea what to do and after hours of searching none of what I found helps. I don't know anything about this stuff so please don't answer with "maybe this willl work, or maybe that." I need a real answer please and I cannot find a way to actually contact Adobe. I also don't have a disk drive on this Mac. Thanks"
Also please feel free to e-mail the answer because I hate looking for these answers online. It takes me forever to find this section. Not that I have even even gotten a real answer.
[email protected]

Hi Sonia,
While transferring Adobe from laptop to PC the licensing files got corrupt and the right way to use Adobe Applications is to install first as transferring from a different machine can give you problems.
You can try steps from this article if that helps otherwise you have to reinstall and manually delete some files , everything is mentioned.
http://helpx.adobe.com/x-productkb/global/error-licensing-stopped-mac-os.html
You can download CS4 from here:
Download CS4 products

I keep getting this error message: ITunes was unable to load data class information from Synch Services. Reconnect or try again later. What does that mean? Can I fix it? or do I have to wait for the next update?

I keep getting this error message: ITunes was unable to load data class information from Synch Services. Reconnect or try again later. What does that mean? Can I fix it? or do I have to wait for the next update?

See TS2690: iTunes for Windows: "Unable to load data class" or "Unable to load provider data" sync services alert.
tt2

I cannot get my new Ipad to be recognised in ITunes so I can Sync my library... I have re-loaded Itunes 64bit but it still comes up with an error saying that I need to load Itunes 64 bit before this Ipad will cbe recognised... any ideas?

I cannot get my new Ipad to be recognised in ITunes so I can Sync my library... I have re-loaded Itunes 64bit but it still comes up with an error saying that I need to load Itunes 64 bit before this Ipad will be recognised... any ideas?
I just found that I can't Sync my Iphone either and it gave the same error code.... it must be a ITunes problem.
Message was edited by: stephenfromwandi

chicx wrote:
This is the third time of writing this on your Apple Support Communities!
Not with your current user id.
Far too much uneccesary information in your post, which only confuses things, a vast amount!
Let's start with iTunes.
Have you updated iTunes to 11.1.5, because the previous version did appear to have an issue about seeing iPods?
With iTunes 11.1.5 installed, look in Edit/Preferences/Devices, (or use the ALT key, followed by the E key and then the F key) and make sure that the box named Prevent iPods, iPhones and iPads from syncing automatically does not have a tick in the box.
Once you have doen those two things, check to see if the iPod is seen by iTunes.
chicx wrote:
By the way, what does IOS mean? (I thought IO stood for operating system, but am flummoxed by the S on the end.
Really?
OS stands for Operating System. (In computer speak, IO means Input/Output.)
iOS originally stood for iPhone Operating System, but it now refers to the iPod Touch and iPhone. The iPod Classic, which you have listed in your profile as your iPod, does not use iOS.
I assume that you have been listening to the Podcast in your iTunes on the computer as you cannot transfer it to your iPod. It's what I'd do.

Hi- I applied the iTunes up to my Windows 7 86bit PC last Wednesday and iTunes will not load due to a Runtime error r6034Access to C Runtime Library Incorrectly. Then I get an windows error code 1114. I have tried rollling back and reinstalling but no joy

Hi- I applied the iTunes up to my Windows 7 86bit PC last Wednesday and iTunes will not load due to a Runtime error r6034Access to C Runtime Library Incorrectly. Then I get an windows error code 1114. I have tried rollling back and reinstalling but no joy

Hi Keen itunes User,
Thanks for using Apple Support Communities. This article has steps you can take for the error you're seeing:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Cheers,
- Ari

My ipod touch is stuck up at Apple Logo, I have tried to update and restore through ITunes but no use, It stuck up again at Apple Logo with no Error, after restoring it showes your ipod is restore but still apple logo won't go

My ipod touch is stuck up at Apple Logo, I have tried to update and restore through ITunes but no use, It stuck up again at Apple Logo with no Error, after restoring ITunes showes your ipod is restore but still apple logo won't go, Due to new Laptop, I do not have any backup, therefore i have tried to select new Ipod touch and goes through step by step procedure but no use, Please help what to do?

i tried reseting my ipod today and had a similar problem... it wont be recognized by itunes, the only thing i havent tried is putting it into DFU mode, or the state that it is in when u recieve it telling u to connect it to itunes.i recommend putting it into DFU mode. http://www.youtube.com/watch?v=34v8HMC9B98 this should better explain it. if i find another way, ill keep u updated

I have previewed my book but after cliking BUY BOOK it compiles it OK but then it always states an error after of during uploading it to the store. How can I rectify this?

I have previewed my book but after cliking BUY BOOK it compiles it OK but then it always states an error after of during uploading it to the store.
How can I rectify this?

I have previewed my book but after cliking BUY BOOK it compiles it OK but then it always states an error after of during uploading it to the store.
How can I rectify this?

I have had 4 mac computers and after years of downloading songs from itunes, I keep recieving a message that I need to set up an account. when I try to make a new account, i get an error that says i already have an account. please help!

I have had 4 mac computers and after years of downloading songs from itunes, I keep recieving a message that I need to set up an account. when I try to make a new account, i get an error that says i already have an account.

Have you tried checking the Store drop-down menu in the iTunes interface to see if you are signed in the existing account?

HT2292 the latest itunes update on my vista laptop brings up R6034 runtime error - after rebooting - uninstalling - reinstalling i have no itunes access. please correct in your updates. there are others with the same error message

the latest itunes update on my vista laptop brings up R6034 runtime error - after rebooting - uninstalling - reinstalling i have NO itunes access. please correct in your updates. there are others with the same error message thank you!!

'The installer has insufficient privileges to modify this file C:\Program Files (x86)\Common Files\Apple\Apple Application Support\Web kit.resources\inspector\Images\Spinner Inactive Selected.gif.'
That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
XP instructions in the following document: How to perform disk error checking in Windows XP
Vista instructions in the following document: Check your hard disk for errors
Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

OCX Error after 256MB of FLV have loaded

Similar Messages

Maybe you are looking for