Od classic all i'm getting on the display is a blank white screen, itunes recognizes it but is only displaying 127gb free even though it's empty and should be 148gb free
after replacing both the logic board and hard drive on my ipod classic all i'm getting on the display is a blank white screen itunes recognizes it after a restore but is only displaying 127gb free instead of 148gb. the hard drive is a brand new 160gb the logic board came from a working 6th gen 120gb ipod classic
Will,
"I thought you bought the entire display and had two LVDS cables?"
Right, but I mean I think the connector on the logic board might be detached/broken. When I tested the old display, I completely removed the new one, cables and all, and connected the old one with the original LVDS cable. So these symptoms are independent of the lcd/cables that I use.
Yes that socket could be bad and this:
Even the random distorted coloration on the cracked lcd was replaced by blank whiteness.
would point to that problem. Did you try messing with that connector when it's powered up?
I'm not sure I follow. By "completely black screen" I meant no backlight...
Detached GPU a.k.a ball grid array ATi chip:
-computer boots, with chime
-distortions in color
-flickering lines
-cycling through red, green and blue
-ultimately a blank screen (but still backlit?)
I have an ATI 9200 GPU chip that failed in a way I call "black moving shadows"
Detached U28 chip the Danes mounted a complaint about:
-computer will not boot, no chime
-loud constantly whirring fan
Right that pin 15 I talked about. Relatively easy to solder back.
-maybe will boot if clamped on left of trackpad, but with intermittent graphical distortions
No there would be no graphic anomalies in this failure and clamping left of the track pad is a problem since that's where the hard drive is. The pressure should go on U28 as indicated in the Cory Arnold site better resolder pin 15.
I guess I just want to get this all sorted out for posterity.
OK. If you hit a wall you could send it up here and I'll take a look.
Richard
Similar Messages
-
When I bring up my Mozillafirefox, all I get is a window with a blank white screen, (and the firefox logo). (After using Firefox very happily for over a year, I had to 'reinstall' Firefox 3.66 about a month and a half ago, (and lost all my bookmarks as a result therein), and hope I can get my firefox back this time without having to reinstall. Mozilla Firefox is still listed as one of my active programs). HELP! Is there a way to get my firefox back without reinstalling? Many thanks!
== This happened ==
Every time Firefox opened
== June 30, 2010 ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; .NET CLR 2.0.50727)same problem. wtf. just happened one day when i went to use it. nothing out of the ordinary installed either....
-
Application Basics
Name
Firefox
Version
5.0.1
User Agent
Mozilla/5.0 (Windows NT 6.1; WOW64; rv:5.0.1) Gecko/20100101 Firefox/5.0.1
Profile Directory
Open Containing Folder
Enabled Plugins
about:plugins
Build Configuration
about:buildconfig
Extensions
Name
Version
Enabled
ID
Norton Toolbar
2011.7.0.8
true
{2D3F3651-74B9-4795-BDEC-6DA2F431CB62}
Symantec IPS
3.0
true
{BBDA0591-3099-440a-AA10-41764D9DB4DB}
RealPlayer Browser Record Plugin
14.0.3
false
{ABDE892B-13A8-4d1b-88E6-365A6E755758}
Modified Preferences
Name
Value
browser.places.smartBookmarksVersion
2
browser.startup.homepage
www.google.com
browser.startup.homepage_override.buildID
20110707182747
browser.startup.homepage_override.mstone
rv:5.0.1
extensions.lastAppVersion
5.0.1
network.cookie.prefsMigrated
true
places.history.expiration.transient_current_max_pages
128547
privacy.sanitize.migrateFx3Prefs
true
Graphics
Adapter Description
NVIDIA GeForce GTX 260
Vendor ID
10de
Device ID
05e2
Adapter RAM
896
Adapter Drivers
nvd3dumx,nvwgf2umx,nvwgf2umx nvd3dum,nvwgf2um,nvwgf2um
Driver Version
8.17.12.7533
Driver Date
5-20-2011
Direct2D Enabled
true
DirectWrite Enabled
true (6.1.7601.17563, font cache 18.56 MB)
WebGL Renderer
Google Inc. -- ANGLE -- OpenGL ES 2.0 (ANGLE 0.0.0.611)
GPU Accelerated Windows
1/1 Direct3D 10Aaah that makes sense, the only problem i have now is that when in my gideonmarshall.com add cname record page i have the following option :-
Host name (then a blank box to type in) .gideonmarshall.com
points to (then a blank box to type in)
(how i set it up originally is - Host name (WWW) .gideonmarshall.com
points to (web.me.com)
what do i type into the host name box now to get gideonmarshall.com to redirect to either www.gideonmarshall.com or web.me.com?? I would have thought that anything i type in there would just create another sub domain which would then compound my problem and i can't leave it blank. Also would it be best to do this as a new cname record directing gideonmarshall.com to www.gideonmarshall.com, or for me to just sort out the initial cname record i created so it directs gideonmarshall.com to web.me.com and if that is the case what would i put in the host name box since i can't leave it blank??
Thanks for all your help so far, fingers crossed this last bit is easy -
I only see a blank white screen when I try to open the itunes store.
I have an iMac running OS X 10.8.4 and cannot view the itunes store. My library shows but the store is a blank white screen. On my macbook at home with the same system it works fine.
Hi Jim,
I am having the same problem so I followed your advice and signed out, restarted, and signed back in. It let me look at my account in the itunes store but when I try to leave my account and go to the actual itunes store, it is still just a blank white screen. There are home, music, movies, etc. tabs. Movies and tv shows both have a black screen but the rest are white. Do you have any other suggestions? -
I have paid for an iPad magazine subscription, but I can not see all the pages of the first issue I just got. All I'm getting is the free preview. I contacted the magazine publisher, IPC, who said to contact Itunes, where I do not see an answer.
You can contact iTunes Store Support here.
https://getsupport.apple.com/Issues.action
Click on Purchases, billing and redemption to get started. Are you sure that you actually downloaded the magazine? I have a subscription to one magazine and I choose to download the magazines on my own rather than automatically. -
My ipod classic just froze on me and will not even reset. All I'm getting on the display is a read circle with a red x in the middle. HELP!!!!!!!!!!
If you are unable to get the iPod into Disk Mode to restore it and instead get the red X symbol, it's a very good indication of a damaged hard drive inside of your iPod. This means you'll need to take or send your iPod in for repair or replacement.
B-rock -
I Mac freeze: When powered on all I get is a blank white screen with the apple logo. No "beach ball" nothing more. Tried all the usual restarts. Help?
Tried all the usual restarts. Help?
Care to share?
Please detail ALL you have done so far in the way of troubleshooting? Need this info to avoid the been there done that scenarios.
===========
Your profile is a complete blank!!!!
When posting in Apple Communties/Forums/Message Boards.......It would help us to know which Mac model you have, which OS & version you're using, how much RAM, etc. You can have this info displayed on the bottom of every post by completing your system profile and filling in the information asked for.
CLICKY CLICK-----> Help us to help you on these forums
***This will help in providing you with the proper and/or correct solutions.*** -
My Firefox is not working (All I get is a blank white screen with the firefox logo. If I have to reinstall Firefox 3.66, how can I transfer my old profile to the new installation?
== This happened ==
Every time Firefox openedDavid. Thank you very much. The problem was not with the canvas but rather the Viewer. But the solution was the same. Somehow, the Viewer window was re-set to Alpha. I changed it back to RGB.... and the picture is back. These issues are often very simple.... but they can drive you bats if you don't know the answer. Very grateful. Tim
-
I'm currently running 10.6.8 and would like to upgrade to mountain lion but all i keep getting is the following: We could not complete your purchase. OS X Mountain Lion is not compatible with this computer. help
ERA AND MCM wrote:
We could not complete your purchase. OS X Mountain Lion is not compatible with this computer.
it means exactly that, you mac is not compatible to run ML. http://support.apple.com/kb/SP654 -
on my AppleTV via the iPad but all I'm getting is the audio. Am I doing something wrong?
It's not just Lovefilm - many app makers limit these things to keep the movie studios happy.
Sky do the same I believe.
AC -
How do I get Mozilla Firefox GB version to download? because all I keep getting is the US version, which is conflicting with AYI (Are You Interested) on Facebook. Which won't allow me to access my messages, browse and see who's viewed me on this site. But I have had Mozilla Firefox before (English version) and it as allowed me acces to AYI on Facebook. so I cannot understand why the US version won't allow the same access to AYI on Facebook?
You can download Firefox in many different languages.<br>
You can view the available languages [http://www.mozilla.org/en-US/firefox/all/ here]. -
Even before my update to iOS 5.1 it was doing that, not a very long time ago. My mac is starting to get really slow, and is stopping sometimes and keeps spinning the wheel for a very long time. I updated my mac today, but still in IMovie all I keep getting is the open window and the continuously spinning wheel, how can i fix it? Can you help me please?
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
After reading and resetting everything with Keyboard I still get blank white screen on 2nd? page of boot. The only way I can boot to Mavericks is unplug power cord, push and hold power button while plugging power cord in. Fans run at full speed, machine boots then runs normal except the dvdrw will not . The mid 2011 IMAC had the same problem with LION. I changed hard drives, formatted, and installed a clean install of latest os x mavericks. Any help would be greatly appreciated.
EtreCheck version: 1.9.15 (52)
Report generated August 30, 2014 at 6:56:41 PM EDT
Hardware Information: ?
iMac (21.5-inch, Mid 2011) (Verified)
iMac - model: iMac12,1
1 2.5 GHz Intel Core i5 CPU: 4 cores
4 GB RAM
Video Information: ?
AMD Radeon HD 6750M - VRAM: 512 MB
iMac 1920 x 1080
System Software: ?
OS X 10.9.4 (13E28) - Uptime: 0 days 0:16:53
Disk Information: ?
ST3120026AS disk0 : (120.03 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted>: 209.7 MB
Untitled (disk0s2) / [Startup]: 119.17 GB (87.12 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
HL-DT-STDVDRW GA32N
USB Information: ?
Apple Inc. FaceTime HD Camera (Built-in)
CHICONY USB NetVista Full Width Keyboard
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Computer, Inc. IR Receiver
Apple Internal Memory Card Reader
Thunderbolt Information: ?
Apple Inc. thunderbolt_bus
Gatekeeper: ?
Anywhere
Kernel Extensions: ?
[loaded] com.nvidia.CUDA (1.1.0) Support
[loaded] com.sophos.kext.sav (9.0.61 - SDK 10.7) Support
[loaded] com.sophos.nke.swi (9.0.53 - SDK 10.8) Support
Startup Items: ?
CUDA: Path: /System/Library/StartupItems/CUDA
FanControlDaemon: Path: /Library/StartupItems/FanControlDaemon
Launch Daemons: ?
[loaded] com.adobe.fpsaud.plist Support
[running] com.arcsoft.eservutil.plist Support
[running] com.bjango.istatmenusdaemon.plist Support
[loaded] com.oracle.java.Helper-Tool.plist Support
[running] com.sophos.autoupdate.plist Support
[running] com.sophos.configuration.plist Support
[running] com.sophos.intercheck.plist Support
[running] com.sophos.notification.plist Support
[running] com.sophos.scan.plist Support
[running] com.sophos.sxld.plist Support
[running] com.sophos.webd.plist Support
Launch Agents: ?
[running] com.arcsoft.esinter.plist Support
[running] com.bjango.istatmenusagent.plist Support
[loaded] com.nvidia.CUDASoftwareUpdate.plist Support
[loaded] com.oracle.java.Java-Updater.plist Support
[running] com.sophos.uiserver.plist Support
User Login Items: ?
Macs Fan Control
Firefox
Internet Plug-ins: ?
FlashPlayer-10.6: Version: 14.0.0.176 - SDK 10.6 Support
Flash Player: Version: 14.0.0.176 - SDK 10.6 Support
QuickTime Plugin: Version: 7.7.3
JavaAppletPlugin: Version: Java 7 Update 67 Check version
Default Browser: Version: 537 - SDK 10.9
Audio Plug-ins: ?
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 2.0 - SDK 10.9
AppleAVBAudio: Version: 203.2 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins: ?
Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
3rd Party Preference Panes: ?
CUDA Preferences Support
Fan Control Support
Flash Player Support
Java Support
Time Machine: ?
Time Machine not configured!
Top Processes by CPU: ?
1% WindowServer
1% fontd
0% firefox
0% SystemUIServer
0% SophosWebIntelligence
Top Processes by Memory: ?
229 MB firefox
156 MB SophosScanD
152 MB InterCheck
131 MB com.apple.IconServicesAgent
115 MB SophosAntiVirus
Virtual Memory Information: ?
424 MB Free RAM
1.53 GB Active RAM
1.37 GB Inactive RAM
699 MB Wired RAM
1.26 GB Page-ins
0 B Page-outsI'd start by getting rid of the following software responsible for these extensions.
Kernel Extensions: ?
[loaded] com.nvidia.CUDA (1.1.0) Support
[loaded] com.sophos.kext.sav (9.0.61 - SDK 10.7) Support
[loaded] com.sophos.nke.swi (9.0.53 - SDK 10.8) Support
Startup Items: ?
CUDA: Path: /System/Library/StartupItems/CUDA
FanControlDaemon: Path: /Library/StartupItems/FanControlDaemon
Use the uninstaller provided with the Sophos software. You can uninstall CUDA via the preference pane. Be sure you remove the com.nvidia.CUDA extension which is located in the /System/Library/Extensions/ folder. Not sure if Fan Control has an uninstaller so you will have to do it manually:
Uninstalling Software: The Basics
Most OS X applications are completely self-contained "packages" that can be uninstalled by simply dragging the application to the Trash. Applications may create preference files that are stored in the /Home/Library/Preferences/ folder. Although they do nothing once you delete the associated application, they do take up some disk space. If you want you can look for them in the above location and delete them, too.
Some applications may install an uninstaller program that can be used to remove the application. In some cases the uninstaller may be part of the application's installer, and is invoked by clicking on a Customize button that will appear during the install process.
Some applications may install components in the /Home/Library/Applications Support/ folder. You can also check there to see if the application has created a folder. You can also delete the folder that's in the Applications Support folder. Again, they don't do anything but take up disk space once the application is trashed.
Some applications may install a startupitem or a Log In item. Startupitems are usually installed in the /Library/StartupItems/ folder and less often in the /Home/Library/StartupItems/ folder. Log In Items are set in the Accounts preferences. Open System Preferences, click on the Accounts icon, then click on the LogIn Items tab. Locate the item in the list for the application you want to remove and click on the "-" button to delete it from the list.
Some software use startup daemons or agents that are a new feature of the OS. Look for them in /Library/LaunchAgents/ and /Library/LaunchDaemons/ or in /Home/Library/LaunchAgents/.
If an application installs any other files the best way to track them down is to do a Finder search using the application name or the developer name as the search term. Unfortunately Spotlight will not look in certain folders by default. You can modify Spotlight's behavior or use a third-party search utility, EasyFind, instead.
Some applications install a receipt in the /Library/Receipts/ folder. Usually with the same name as the program or the developer. The item generally has a ".pkg" extension. Be sure you also delete this item as some programs use it to determine if it's already installed.
There are many utilities that can uninstall applications. Here is a selection:
1. AppZapper
2. AppDelete
3. Automaton
4. Hazel
5. AppCleaner
6. CleanApp
7. iTrash
8. Amnesia
9. Uninstaller
10. Spring Cleaning
For more information visit The XLab FAQs and read the FAQ on removing software.
Be sure to remove your two Login Items. Finally do this:
Reinstall Lion, Mountain Lion, or Mavericks without erasing drive
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu.
Reinstall Lion, Mountain Lion, or Mavericks
OS X Mavericks- Reinstall OS X
OS X Mountain Lion- Reinstall OS X
OS X Lion- Reinstall Mac OS X
Note: You will need an active Internet connection. I suggest using Ethernet
if possible because it is three times faster than wireless. -
I am having problems connecting to home wifi. It was working, but now all I get is a blank white screen. I re-booted with no success.
Hi, blank white screen where exactly?
Make a New Location, Using network locations in Mac OS X ...
http://support.apple.com/kb/HT2712
10.5, 10.6, 10.7 & 10.8…
System Preferences>Network, top of window>Locations>Edit Locations, little plus icon, give it a name.
10.5.x/10.6.x/10.7.x/10.8.x instructions...
System Preferences>Network, click on the little gear at the bottom next to the + & - icons, (unlock lock first if locked), choose Set Service Order.
The interface that connects to the Internet should be dragged to the top of the list.
If using Wifi/Airport...
Instead of joining your Network from the list, click the WiFi icon at the top, and click join other network. Fill in everything as needed.
For 10.5/10.6/10.7/10.8, System Preferences>Network, unlock the lock if need be, highlight the Interface you use to connect to Internet, click on the advanced button, click on the DNS tab, click on the little plus icon, then add these numbers...
208.67.222.222
208.67.220.220
(There may be better or faster DNS numbers in your area, but these should be a good test).
Click OK. -
I tried to install yosemite yesterday and my computer goes through the whole installation process and then to a blank white screen. I've rebooted, I've reinstalled several times and get the same result. Two days wasted and I can't use my computer!!
I don't know if you've already resolved your problem, but I had the same thing, it took me 6 hours to fix it. I had the exact same as you, installed the update and then it went to a white screen. After trying start up holding down cmmd r or holding down the alt key to try to install it again, nothing worked, same result every time. Then an angel came to me here somewhere but I can't find it now to thank him. Start in safe mode, press shift once you hear the start up chime and hold it down until you hear it again. Installation completion box came up and it was working. turn off computer and start up again normally and all is well. Except my final cut pro x doesn't work with it, have to update that now too. same as when I updated to mavericks.
Hope this helps.
Maybe you are looking for
-
Computers can no longer see eachother & share resources
I have the wireless WRT54G2 router. I connect using my laptop wirelessly through the router. My desktop computer is connected through the router wired. Laptop is Vista, desktop is XP. This is nothing new, and everything worked fine up until a few wee
-
How to put material and service in the same order
I want to put the material and service in the same order. How do it input different taxes. and also migo for one material item and other service item.
-
INTEGRATION_DIRECTORY_HMI test connection
on SM59, INTEGRATION_DIRECTORY_HMI, when i tried to test connection, always WINDOW POP UP to input ID and password otherwise, SXI_CACHE, same issue happened but, after type XIISUSER and password, it goes ok as up-to-date green icon does anyone know t
-
Beginner's Web Service Question
Can an argument to a method in a web service be an object? For instance, I would have to pass about 8 parameters to a method, but if I have a java object that contains those elements, can that be the parameter in a web service method call? class Pers
-
OracleJSP: oracle.jsp.provider.JspCompileException: Errors compiling:/u01/app/oracle/product/IAS904/j2ee/OC4J_Portal/application-deployments/wwwotn/wwwotn/persistence/_pages//_searchotnerr.java Line # Error 219 [jsp src:line #:498] cannot resolve sym