OD replica - managed profile settings

I have two ML servers, one is set as the OD mater and the second as the replica. The replica 'sees' the users and groups in the master, so all seems well.
But what settings should I have for the managed profiles (ML clients)?
Currently, I have the client computers with a managed profile that has both servers under the Directory setting, and all usesr with a managed profile that serves only the master as the LDAP server.
I'm not sure whether I should serve the Directory and LDAP to the computers or the users, and whether they should be served both servers or only the master.
Also, for the LDAP is is OK to have the search base as dc=ldapserver,dc=company,dc=com, or do I need to stipulate user base as well?

Glenn, as always please read the manuals, but from my understanding if your clients are running 10.3.9 and 10.4.x, you will only need the OD master configured in Directory Access. Once the client is booted it will get info on replica's, thus if your master is down it will already have info on the replica(s) and login, permissions, etc will continue to work as they did before.
The second question "downgrading the master to standalone", not sure why you would want to do that unless you have some major problems with the file system, etc. If you must destroy the master make sure you promote the replica ASAP. After fixing the original "master" you can then re-promote it and make the original "replica" a replica again.
Hope this helps....

Similar Messages

Inherit user profile settings

Hi
I need some help to save couple of time managing profile settings for every user in our Agency. We use 10.6 Server, 10.6 on the clients and the Adobe Design Standard CS5. To use Adobes CS5 in a good way, many settings need to be stored in the users profile (like GREPs, printer joboptions, color profiles, etc.). Seperate from the huge time amount to configure every user on its own, it is more than possible to forget some important preferences. Is there any way to inherit from a adobe well formed user profile?
Thanks for your suggestions and btw. ... sorry for my bad english

this is not a SAPGUI question.
try the Security forum at Security

Snow Leopard Server - Managed Dock Settings

Hello Everyone,
In our environment, we are running Snow Leopard Server 10.6.7 with a mix of 10.5 and 10.6 clients. We are managing settings via Open Directory. We have a computer group policy configured to manage our dock policy settings among a few others. Within WGM, our dock policy settings are setup to be managed "once." When the policy was configured, our Mac administrator put together a customized default dock arrangement with the most commonly utilized applications included in our base image allowing our end users to start with a small clean dock arrangement and add applications/folders as desired.
Regrettably, last week I inadvertently made a change within WGM's managed dock settings in our default production policy. The following morning, several end users logged on to find that their dock customizations had been discarded and replaced with the default setup. To minimize the impacted users, I enabled "merge with user's dock" to avoid further loss of dock customizations. Looking forward, as we roll out new hardware with new images to our existing users, I would like to start with the same scaled back dock with the commonly utilized applications included in our base image. The problem with enabling "merge with user's dock" is that the default set of Mac OS X icons is included causing the dock to be cluttered.
Is there anyway to only apply managed dock preferences if there is not a local profile on the machine the user is logging into? Any other thoughts for circumnavigating the mess I created?
Thanks!

Enabling "merge with user's dock" created problems of its own by introducing duplicate icons for some users. In the end, I unchecked it. Unfortunately, all users are going to receive the default dock arrangement and have to re-customize their dock preferences as desired.

Manage Profile Targets

Post Author: cbaumann
CA Forum: Publishing
Hi all
I am testing a publication with profiles. In my profile I can add my universe. But here is 1 field for the Class Name and Variable Name.
the class name would be the folder in my universe while the Variable is the object in this folder. How can I combined 2 folders or values?
Having a folder called Names and a subfolder called Firstnames with some Values inside. Names,Firstnames or Names;Firstnames ? Can't find a good description about how to use this stuff really.
Thanks, Chris

Thanks for the reply Adnan, however I think you missed the point. There is no capability to edit the properties, there's no dropdown to select edit form, in any of those areas against any of the properties. I can see them but not edit them.
It must be a permissions problem but I've no idea where it may lie.
Here's how the UPS and Mysites were built:
Created a separate user for the UPS account (UserUPS), and registered it as a Managed Service account.
Added Replicating Directory Changes to the Farm account.
Started the User Profile Service.
Created the UPS application using the UserUPS account for the application pool.
Configured the Directory Import - used SharePoint Active Directory Import.
Created a new Synchronization connection using the Farm account - it worked.
Ran the synchronization - it worked, everything was import.
Went into Manage Profile Service, Under People click on Manage User Profiles, entered a users name, clicked on it when it appeared - nothing, no edit capabilities at all.
So at a loss as to where I've gone wrong?
Ran Add-SPAdmin - it added the Farm account to the configuration db, and when I tried it against the Profile database it complained, basically saying not possible,
I'm out of ideas at the minute and need to get this working so we can use SharePoint to hold a Skills map.
Thanks
David

Remote Management profile disappears on reboot.

Yosemite Server. Yosemite iMac and MBP were updated using Net Install from the server. MBP's that were not set up using Net Install do not have issues.
mdm_profile.mobileconfig and other profiles delete upon reboot. Trust Profile are placed on computer. Enrolled computers through myserver/mydevices to place mdm_profile.mobileconfig on each computer. Other profiles will be pushed to each computer successfully. After reboot they disappear. I had System Preferences open and one by one they were deleted.
It appears to have something to do with the Net Install, due to the fact that they are the only computers that this occurs on. Any ideas?

It is possible. I just ran into this myself. The key is in understanding the difference between Supervised and unsupervised devices. Only supervised devices can be locked to an organizations profile manager. Devices are considered supervised when they are purchased by a company with a business account and account manager from apple.
If the device is supervised there are now additional settings you can adjust. You can also create device groups. Any device purchased from apple without a business account, or from anywhere else, is considered to be an unsupervised device. You can still add it to profile manager and control a lot, but the end user will be able to remove the Management Profile, and thereby all other profiles rolled out on the device or user level.
When you purchase from the apple business store, your account manager will set up a list of the devices.
You log into the Apple Deployment site and enter your order number.
All your new devices are auto ported into your profile manager.
At that point you can set them to device groups
set device groups settings
then when turn them on they will force you to login, register, etc etc.
After that you can layer on device and/or user profiles on top of your group profile.

Airport base station Manage Profiles dimmed

I cannot do this (Manage Profiles dimmed):
"AirPort Extreme and AirPort Express Base Stations can store up to five configurations, known as profiles. A profile contains base station settings, such as names and passwords, and network configuration information, such as the way the base station connects to the Internet."
http://docs.info.apple.com/article.html?path=Airport/5.0/en/ap2114.html1http://d ocs.info.apple.com/article.html?path=Airport/5.0/en/ap2114.html
iMac Intel Core 2 Duo 2.16 GHz
AirPort Utility 5.2.1.app
AirPort Firmware 5.7
Airport Extreme Base Station w/ Modem & Antenna
Port M8799LL/A
System Version: Mac OS X 10.4.10 (8R2218)
Kernel Version: Darwin 8.10.1

I am sorry to say that your last post answered your question and your problem.
Symantec...... If you have anything Norton on your Mac, chances are better than not there is your problem.
1st The Firewall that comes native to Mac OSX and the Unix Operating System is one of the best.
Norton Products have shown to be very disruptive to Mac Systems, Period.
When you mention you disable Norton Firewall and all is well then it just bears out that Norton is your problem.
I think your problem will go away when everything Norton is gone.
Here is the link to UnInstall.
http://www.symantec.com/techsupp/files/navm/navmac_9files.html
Good Luck, This should solve your problems. Don

Manage Profile Services - Unable to edit User Properties or User Profiles

SharePoint 2013 - fresh site, with Mysites, and the User Profile Service running. The UPS is ran under a separate account, and the farm account has securityAdmin rights and directory replication rights.
When I enter Manage User Properties, I get a complete list of properties but no way to edit them, the same happens when I go into User Profile Properties, there is no where to edit the users. Has anyone seen this before and if so what step have I missed
in setting the UPS and MySites Up.
Both Administrator and Farm Admin have Administrator rights to the UPS Application, and it's the Profile User Service that's running at the minute not the Profile User Synchronization Service.
Any help would be appreciated.
Thanks
David

Thanks for the reply Adnan, however I think you missed the point. There is no capability to edit the properties, there's no dropdown to select edit form, in any of those areas against any of the properties. I can see them but not edit them.
It must be a permissions problem but I've no idea where it may lie.
Here's how the UPS and Mysites were built:
Created a separate user for the UPS account (UserUPS), and registered it as a Managed Service account.
Added Replicating Directory Changes to the Farm account.
Started the User Profile Service.
Created the UPS application using the UserUPS account for the application pool.
Configured the Directory Import - used SharePoint Active Directory Import.
Created a new Synchronization connection using the Farm account - it worked.
Ran the synchronization - it worked, everything was import.
Went into Manage Profile Service, Under People click on Manage User Profiles, entered a users name, clicked on it when it appeared - nothing, no edit capabilities at all.
So at a loss as to where I've gone wrong?
Ran Add-SPAdmin - it added the Farm account to the configuration db, and when I tried it against the Profile database it complained, basically saying not possible,
I'm out of ideas at the minute and need to get this working so we can use SharePoint to hold a Skills map.
Thanks
David

CCS-Blank screen appears when Comm Management Profile is assigned

Hi,
We are trying to configure the contact center simulator on CRM 2007.
but when we assign the comm management profile to the business role- ic_agent a blank screen appears on the UI , if we remove the same , view on UI seems to be fine with all the links.
If any of you have faced a similar issue please let me know how this can be resolved.
Regards
Prathiba

Hi,
Have you done the Communication Management Profile configurations and settings appropriately. To be specific please ensure that you have taken care of the following:
Maintain communication management software profiles in the Customizing activity
1. Define Communication Management Software Profiles.
2. Assign the communication management software profile to a business role in the Customizing activity Define Business Role.
3. Maintain communication management software system settings in the SAP Easy Access Menu by choosing Maintain System Settings.
4. System administrators define the communication management software channels and queues in this activity.
5. The Com Mgmt Software System ID must have the same value as the Com Mgmt Software System ID in Maintain Communication Management Software Connections (Prerequisites).
6. You must maintain this activity in each system instance, for example, development, test, and production.
7. Assign communication management software profiles in the SAP Easy Access Menu by choosing Assign Profiles.
8. System administrators assign communication management software queues and channels to profiles in this activity.
9. You must maintain this activity in each system instance, for example, development, test, and production
Please go through the following help
http://help.sap.com/saphelp_crm60/helpdata/en/45/f06320312c3112e10000000a1553f7/frameset.htm
Regards,
Deepak

GoPro Camera Raw Lens Profile settings not working for image sequence in Photoshop/AE/Premiere CS6

Hey Everyone,
I'm in need of assistance in either Photoshop CS6, After Effects CS6, or Premiere Pro CS6. I just installed the trials after seeing Russell Brown demo the GoPro Lens Profile correction feature in Camera Raw. Basically what I'm looking to do is make adjustments (in Adobe Camera Raw) to a series of still images (shot with the time-lapse mode on the GoPro) and then either export those stills through Photoshop or Bridge to a temporary movie file that will be imported into a timeline (with other video clips), or import the JPG files (with Camera Raw settings) directly into After Effects or Premiere as an image sequence. The latter would be preferable as it'd avoid the extra step of having to render the intermediate/temporary movie file.
Right now, my current workflow for GoPro time-lapses is:
          - use Bridge CS4 to do basic color correction on the still images
          - save those as TIF files
          - run the TIF files through a custom script to have Hugin 2012.0.0 (open source pano stitcher) remove the fisheye distortion
          - open the new TIF image sequence into QuickTime Player 7 (Pro)
          - export the image sequence as a QuickTime movie file
          - import the movie file into Premiere Elements 10 to place on a timeline with other video clips (as Premiere Elements can't handle the sequence(s) of thousands of still images without crashing)
If I can go directly from Bridge to a timeline, it'd save a lot of processing time (and it'd be much nicer to preview the images in Bridge without the fisheye distortion)!
I can prepare the GoPro JPG files through Adobe Camera Raw in Bridge CS6, though when I go to import the JPEG image sequence into Premiere Pro CS6 or After Effects CS6, none of the Camera Raw settings are applied. If I export the Camera Raw files in Bridge CS6 as DNG files (a step I'd really prefer to avoid) and then import the DNG image sequence into After Effects CS6, the Camera Raw settings are applied except for the Lens Profile settings -- I can pick other cameras but not the GoPro lens profiles when the DNG image sequence loads in After Effects. It also appears that once I open the DNG files in After Effects CS6, I can no longer access the GoPro Lens Profile in Adobe Bridge CS6 -- the list changes to the same list I get in After Effects. Premiere Pro CS6 doesn't let me import the DNG files at all. I've also tried to import the JPG files (as well as the converted DNG files) into an image sequence in Photoshop CS6, though it doesn't allow me to do so (the Image Sequence checkbox is grayed out after I apply the Camera Raw settings in Bridge).
There could be an issue going on with different Camera Raw versions. I didn't have Premiere Pro CS6 installed during my initial testing, though now do notice that the Camera Raw dialog in Bridge CS6 only lets me choose compatibility up to "Camera Raw 7.1 and later" when I choose to export the files as DNG. I thought Camera Raw 8.2 was an option there a couple days ago when I only had installed Photoshop CS6 and After Effects CS6 (though am not 100% certain).
Please let me know if there is some workaround to get the GoPro lens profile Camera Raw corrections applied in an image sequence in one of the Adobe CS6 products (without having to export the files as temporary TIF or JPG files out of Camera Raw). I'd greatly prefer to shorten my current workflow for these files. (I just updated the CS6 trials and have tested all three programs again though I still get the same results described above.)
Does Lightroom 5 have any option to export Camera Raw image sequences as movie files (or any other feature that might help in simplifying my current workflow)? I can't install the trial right now as it's not compatible with OS X 10.6.8. I'd consider upgrading OS X if I knew Lightroom 5 would do what I need, though am waiting for any potential color profile issues to be resolved in OS X 10.9.
I can open the image sequence in Photoshop CS6 if no Camera Raw settings are applied and then use the Lens Correction Filter to apply the GoPro Lens Profile settings, though I really prefer the Camera Raw interface in Bridge for tweaking image settings. As soon as I apply Camera Raw settings to the first image, Photoshop CS6 grays out the image sequence checkbox.
If there isn't a way to take Camera Raw files straight from Adobe Bridge to a timeline, I may stick with my current workflow using CS4 and see what I can do to better automate some of the steps as the TIF export in Bridge, fisheye distortion removal in Hugin, and render in QuickTime Player all take quite a while. I won't mind waiting for all the processing if I can set it and check back on it in later the next day when it's fully complete. Is there a way to have Adobe ExtendScript execute an external shell command (i.e.: a command I could type into the bash shell in Terminal in OS X)? If not, is there a way to call/run an ExtendScript script from the command line and pass a parameter to it that my custom script could use?
Thanks in advance,
Mark

Can you zip up a few of your GoPro images, upload them to dropbox.com and post a share link, here, so others can experiment with them, or do you mean this issue is global to all camera models?

" plug-in name does not support the highest level of security for Safari plug-ins" appear for some plugins in Safari Security "Manage Website Settings"?

Hi,
Wondering why "<plug-in name> does not support the highest level of security for Safari plug-ins" appear for some plugins in Safari > Security > "Manage Website Settings"?
Have been trying to get to the root cause of the problem but did not find much on this. I am trying to figure out what can get the warning to go away completely than using the Allow/Always Allow options for the plug-in
Thanks,
Shyam

Hi Linc,
Thank you for your response. Here is the screenshot of the warning that I am talking about.
Here is what I do:
1. Launch Safari and open its Preferences. I have Safari 7.1 installed on my machine.
2. Click Security Tab and click Manage WebSite Settings
3. A window opens showing me all the Plug-ins that I have (listed on the left hand side).
4. One of them is the Adobe Reader plug-in. When I click Adobe Reader, the following details about the plug-in show up on the right
I was referring to the highlighted section that warns me about this plug-in not using the highest level of security for Safari Plug-ins.
Note: I do not see this for all my plug-ins (QuickTime, Adobe Flash Player don't give me this warning) which tells me that there is a way to make the warning go away.
Thanks again,
Shyam

I need to migrate Firefox profile settings from an install on a drive where the Windows 7 OS has been corrupted to a new drive and current Windows 7 install of Firefox is active. Is there any solution? Thanks.

Had to reinstall Firefox on new drive with new install of Windows 7.
Missing all of my profile settings.

http://support.mozilla.com/en-US/kb/Recovering+important+data+from+an+old+profile
Your old Profile is located here in Vista & Win7: <br />
''drive'':\Users\''Windows login user name''\AppData\Roaming\Mozilla\Firefox\Profiles\''profile_name''

Profile settings not saved when OS shuts down! :(

Hi guys! I'm a proud Mac convert but I'm having a little bit trouble with saving my profile settings. My Macbook was purchased in TX, my sister played with the settings for a while before it was shipped to me here in the Philippines. She just put it to sleep mode,so I shut it down, but when I tried to restart it, all the settings were set to the default - the desktop wallpaper, the dock size and magnification, my aliases, and even the library files I add to my ITunes I have to do all over again!
The files that I saved were not lost though, it seems to me that a new profile loads whenever I shut down the computer. I have verified that hunch when I saw multiple profile names under USERS (ComputerName1,ComputerName2, ComputerName3, ComputerName4, so forth and so on).
Is there something that I did wrong?
Macbook 2.0 GHz Mac OS X (10.4.7) Black Model

What you are calling "Profiles" are actually called "Users." And from reading your description more than one User has been setup on your MacBook. So it seems the issue is that you are logging into a user account other than the one you originally started using.
When you restart the MacBook does it automatically login to a user account or do you have have to type a password to login? If it is automatically logging in, then you need to determine which user account your sister was using when she sent it to you. Once you do that you can set the MacBook to automatically login to that account and ignore the others.
To set up automatic login go to System Prefs > Accounts and click Login Options. Click the "automatically log in as:" check box and choose the account from the pull down menu.
But before you do that you need to find out from your sister what usernames and passwords she applied to each user account. When you have that information you can login to each account and when you see your custom desktop you will know which account you were originally using and set that one for automatic login.

Need correct color profile settings in windows....????

Help! Just replaced the motherboard and now all the color profiles in photoshop are wrong.... Does anyone know the correct settings to choose in windows or to choose for the graphics card... it's an AMD Phenom II. I open Adobe Bridge and immediately the previews lose their color which tells me this is not the correct profile the computer is telling photoshop... can anyone help, please????

operating system is windows 7 and the monitor is profiled correctly.... and these are raw images, so no, cannot view in another program.... and they look the same in ps as in bridge. however, i called adobe and they told me it sounds like a graphics card issue, so i'm going to amd's website to update and reinstall drivers.... not sure what else to do....
From: rogleale <[email protected]>
To: Kelly Ferreira <[email protected]>
Sent: Friday, June 10, 2011 11:21 AM
Subject: Need correct color profile settings in windows....????
Not enugh information. Which OS? Is your monitor profiled? Can you see your images in any other program, eg Windows Picture Viewer?
What happens if you open your images in PS instead of Bridge?
Roger

Manage 3D Settings

STEP 2.
Run nVidia control panel and go to 3D settings. Click the Manage 3D settings option and at the Program Settings tab click Add.
Locate Premiere.exe and click it.
Below, at the Multi-Display/Mixed-GPU Acceleration option, click Compatibility Performance Mode and click Apply.
Does anyone know that the above step is supposed to accomplish. I forgot to do it with my 460, but all seems to be working fine anyway.

me too

How do I recover my lost Firefox bookmarks and user profile settings?

I accidentally clicked on Remove all User Profile Settings, Bookmarks and blahblah when I uninstalled my Aurora and now my Firefox has no bookmark etc. I tried using Recuva as recommended from the other questions but it didn't help me at all. I do not have any backup either.

Will other recovery software help? Because I tried using GetDataBack and I found some files that are not named .sqlite but rather .sqlite-wal or .sqlite-shm. What are those?

OD replica - managed profile settings

Similar Messages

Maybe you are looking for