Odac 12.1 Oracle.VsDevTools Cannot edit query results

I am running Windows 7 64-bit and Visual Studio 2010
I installed ODTwithODAC121010 successfully.
In Visual Studios Help>About it shows: Oracle Developer Tools for Visual Studio 12.1.0.1.0
Issue:
After updating to odac 12.1 I can no longer edit/insert data into the query builder results pane.
I have relied on this capability in previous versions of odac.
Has this feature been removed?
I've connected to multiple Oracle 11g dbs with same results below:
I get the following response when I attempt to edit a field in the query results pane:
No row was updated.
The data in row 10 was not committed.
Error Source: .
Error Message: Unable to parse expression.
Correct the errors and retry or press ESC to cancel the change(s).
I get the following response when I paste a new row in the query results pane:
No row was updated.
The data in row 11 was not committed.
Error Source: Oracle.VsDevTools.10.0.
Error Message: Object reference not set to an instance of an object.
Correct the errors and retry or press ESC to cancel the change(s).
Is there something I need to do to enable this?
What are some good alternatives if this capability is no longer supported?

Hi George Pertea,
Thanks for the reply.
I am in the edit query mode and also the query tool bar is enabled.
But my "view sql" button is disabled,I cannot click on it.
I am logged in as "Admin" , so what is the problem.
I was able to do that in XI R2 before.
Please help me!
Thanks

Similar Messages

Edit query results in SQL worksheet

I can't edit query results in SQL worksheet, I not found any options to "ON" this. I use SQL Developer 2.1.1.64.

You can't edit results in the worksheet. It's an accepted feature request with no scheduled date. In the mean time you have to go to the table or write an update statement.

How to Edit Query Result of Simple Search Panel

Hi Experts,
I have a question regarding Simple Search Panel.
I have made a VO that select a table which contained data like this:
Name | Skill | Status
Rooney | Shooting | A
Rooney | Heading | B
Rooney | Running | B
Van Persie | Shooting | A
Van Persie | Heading | C
Van Persie | Running | B
I successfully made a Simple Search Panel which showing all the data from that VO.
But my requirement is I want to make a grouping of that search result, so it should be showing like this:
Name | Skill | Status
Rooney | Shooting | A
- - - - - - | Heading | B
- - - - - - | Running | B
Van Persie | Shooting | A
- - - - - - | Heading | C
- - - - - - | Running | B
As long as it is the same person with the row above, it won't print the name of the person.
Could you please give me a pointer about this?
Thanks in advance,
Rheza
Edited by: 893922 on Feb 19, 2013 3:13 AM

Hi expert,
My requirement is I need to override the query result from Simple Search Panel.
The data that I provided above was just for simplify the example.
One of my requirement is:
- when the "status" column value is 0, I need to override this and show an image of image0.jpg
- when the "status" column value is 1, I need to override this and show an image of image1.jpg
Any pointers about this will be so much appreciated.
Thanks,
Rheza
Edited by: 893922 on Mar 6, 2013 7:26 PM

How to generate XML file from oracle database query result

Hi dudes,
as stated on the subject, can anyone suggests me how can i achieve the task stated above??
Here is a brief description of my problem:
I need to create a XML file once i query from the oracle database, and the query result returned from the database will be stored in XML file.
I'd searched around the JAXB, DOM, SAXP and the like basic concepts, but i still don't know how to start??
Any suggestions ???

Read this:
http://www.cafeconleche.org/books/xmljava/chapters/ch08s05.html
You might have to read more of the book to understand that chapter.

Cannot edit Oracle Spatial data

Hello,
I am running into some problems with my Oracle Spatial data. Maybe somebody has some insight. Here's what is going on:
1) I am able to connect to and view the data in uDig but I cannot edit the data and also the data shows up in the table of contents with a line symbol even though it is polygon data (it renders correctly in the map as polygons). I try using the 'Create Polygon Geometries' tool and it errors saying 'Create Polygon Tool' cannot operate on current layer.
2) When I try testing edits through WFS-T it errors and tells me that the table is read only.
The table is in the USERS tablespace and I have verified that it is read/write. I also set object permissions on the user: ALTER, DELETE, INSERT, SELECT, UPDATE
Am I missing something obvious? Anyone else have this problem? Thanks a lot for any ideas anyone has.

My apologies for the confusion. My insert statement DID work just fine. I just wasn't seeing it...probably because I was querying the table in Enterprise Manager DB Control and it looks like it takes some time to refresh. So it appears that user permissions are not the issue.
I have used two data loading methods:
Before loading data, I needed to create a user defined coordinate reference system:
1 create projection operation for my custom projection
2 configure projection parameters
3 create the projected CRS in mdsys.sdo_coord_ref_system
First data load steps
1 shp2sdo.exe my_shapefile my_table -g geom -s 1000002 -v
2 execute my_table.sql
3 execute sqlldr.exe
4 EXECUTE SDO_MIGRATE.TO_CURRENT('my_table','GEOM');
5 CREATE INDEX my_table_index ON my_table(geom) INDEXTYPE IS MDSYS.SPATIAL_INDEX;
Second data load steps:
1 open up MapBuilder, make a connection, and go through the Import Shapefile wizard. MapBuilder automatically creates a spatial index.
Does it appear that I am missing any steps or doing anything obviously wrong that would be causing me to not be able to edit the data through clients such as uDig or WFS-T?

Cannot Edit Universe Query in Crystal Reports.

Hi,
We have Crystal Reports 2008 SP5 installed on a Terminal Server where our report developers can go to develop reports. We have a 4 node BOXI R2 SP4 cluster on the opposite side of a firewall, and have opened the firewall ports so that Crystal Reports can connect to this BOXI cluster and a universe on that cluster, and the developers can publish their reports.
For some developers, and the issue is intermittent for them, if they open one of those Crystal Reports to edit the universe query, they go into Database Expert and right click and choose Edit query, nothing happens. The Query Editor window does not open. They don't get any errors, other than the Universe Query editor window refuses to open. No errors on the BOXI server side either.
They can work for a few days and everything works fine, when suddenly this behavior starts. When they report the issue to me and I try it myself, it works fine. I've checked their access rights repeatedly and have even given a user temporary full admin rights to rule out any rights issues, but they stll get this behavior.Just as strange, the problem suddenly will disappear. Often, they will send me an message several hours or days later stating that everything is OK again and they can edit their universe queries in the same reports that refused to work earlier.
I've also checked the BOXI cluster nodes to see if possibly one of the services had a missing -requestport setting, and was choosing a random port that the firewall could be blocking, but everything looks fine. If I login to the BOXI cluster servers and try one of the reports, I can edit the query just fine.
Any suggestions? I'm at my wits end.
Edited by: Perry Provst on Nov 11, 2010 9:18 PM

I had the same issue and it was because the Universe is having Oracle as Database and I dont have any Oracle drivers installed on my machine. Once i have installed Oracle drivers i was able to view/edit the query panel.
Hope this would help you.

Cannot View SQL button in XI 3.1 edit query mode

Hi All,
I am using Webi XI 3.1.
I dragged the objects into results pane and want to view the SQL for the query. But I don't find the SQL button at all.
Please help me where to get that!

Hi George Pertea,
Thanks for the reply.
I am in the edit query mode and also the query tool bar is enabled.
But my "view sql" button is disabled,I cannot click on it.
I am logged in as "Admin" , so what is the problem.
I was able to do that in XI R2 before.
Please help me!
Thanks

Errors in simple query in oracle 9i personal edition

hi,
i have oracle 9i personal edition release 9.0.1.1.1 - production.
with it came sql*plus release 9.0.1.0.1 - production
i have installed it on windows 98SE
what i did is the following
step 1:
create type address_ty as object
(street varchar2(50),
city varchar2(50),
state char(2),
zip number);
when i executed i got message "type created"
step 2 :
create table customer
(cust_id number ,
person address_ty);
when i executed this i got message "table created"
step 3 :
insert into customer values
(3,address_ty('xyz','abc','AP',4563));
i get messsage "1 row created"
step 4 :
select cust_id,person.street from customer;
i get error message .......
select cust_id,person.street from customer;
ERROR at line 1:
ORA-00904: invalid column name
i tried this example from the book "Oracle Complete Reference" from oracle press.
what is the problem how to avoid it.
i am a beginner help
gopal

hi! i'm not very sure, but your second field selected is person.street, do you have this field?
why not try just select * from tablename, you should see the result.
hope that helps.
rgds.

Cannot install Oracle 8i (Personal Edition) 8.1.7 on Windows 98 (Second Edition)

Hello,
I am unable to install Oracle 8i Personal Edition on my Windows 98 (Second Edition) system. I have selected "typical" install. All the files get installed (100% complete) but then the Configuration Tool install phase fails to complete when installing Oracle Database Configuration Assistant. I get the following error message :
java.lang.NullpointerException
at DropOracle.QueryDB(Compiled Code)
at DeletePanel.InitControls(Compiled Code)
at DeletePanel.<init>(DeletePanel.java:100)
at DBCreateWizard.<init>(DBCReateWizard.java:569)
at DBCreateWizard.main(DBCreateWizard.java:1422)
The system just hangs with the "in progress" message.
The previous step -
The Net8 Configuration Assistant install completes successfully
(return code 0).
If anyone can help me resolve my problem it will be greatly appreciated.
Or if you could tell me which Oracle email address (or phone number) I should address my problem to it will be appreciated. I do NOT have a Oracle Support Licence (I only purchased the evaluation CD pack).
I have installed Java 2 (JDK 1.3) in a separate directory - but I understand Oracle 8i has its own version of JRE 1.1... in its own subdirectory structure ... so my JDK 1.3 should not be interfering with the Oracle 8i installation programs.
Many thanks in advance.
Partha Sur
732-873-2547

What is your RAM? I ran into the same problem, even though I had more RAM then required. I had to shutdown everything, make a very basic wallpaper that did not put too much strain on the system, then it installed.
Unistall Oracle, remove all the remaining files and the directory by hand. Also you have to remove any trace of Oracle in your regedit. Check if path to Oracle is still in autoexec.bat; if it is delete it - the Oracle path not the file. Reboot and then do Alt-Ctr-Del and turn off all the unecessary programs and try installing it again.
Hope it works.
Iwona

Cannot download Oracle 9i personal edition

I am studying for Oracle DBA certification and was told that I could download a free version of Oracle 9i personal edition. After entering my userid and password, nothing happens. I have my Internet Options settings configured to accept cookies. What else can I try? Can I get a copy of this version on CD? What is the price?
This is for educational use only.

I'm not familiar with the specific offer you refer to, but all Oracle Database software can be downloaded here:
http://www.oracle.com/technology/software/products/database/oracle10g/index.html
and then used for free for educational purposes (OTN membership required).
Cheers, OTN

Oracle 11gR2 Express Edition on Linux Ubuntu 11.10 howto

h1. Oracle 11gR2 Express Edition on Linux Ubuntu 11.10 howto
Author: Dude
Version: D
Last modified: 14-Jan-2012
You are welcome to add comments, but please do not discuss your installation issues in this thread. If you have a question about the instructions, please add a simple note to the link of your own thread. The instructions are the result of my own research and development. If you would like to use any of the information for your own blog or website, please include a link to this reference to include future changes.
Oracle 11gR2 Express Edition on Linux Ubuntu 11.10 howto
h2. Purpose
This document outlines instructions how to install Oracle XE under Ubuntu 11.10.
Ubuntu or Debian based Linux is not on the list of supported operation systems according to the Oracle documentation at http://download.oracle.com/docs/cd/E17781_01/install.112/e18802/toc.htm. You may want to consider virtualization software like Oracle Virtualbox and install Oracle Enterprise Linux as a free and professional alternative to installing XE under Ubuntu. You can also download pre-build virtual machines that include Oracle XE. You can browse http://otn.oracle.com/community/developer-vm for more information.
h2. Topics
h4. 1) Install Linux Ubuntu
h4. 2) Remote Terminal
h4. 3) Install Additional Software
h4. 4) Managing Swap Space
h4. 5) Modify Kernel Parameters
h4. 6) Oracle Home Directory
...a) Resize the Root Partition
...b) Setup External Storage
h4. 7) ORA-00845: MEMORY_TARGET
h4. 8) Installing Oracle 11gR2 Express Edition
h4. 9) Post-Installation
h4. 10) Tips and Troubleshooting
...a) Port 1521 appears to be in use by another application
...b) cannot touch `/var/lock/subsys/listener': No such file or directory
...c) ORA-00845: MEMORY_TARGET
...d) Apex ADMIN password
...e) SYS and SYSTEM password
...f) Uninstall Oracle 11g XE
...g) Reconfigure Oracle 11g XE
...h) Gnome Classic desktop
...i) Unix vi cursor keys
...j) Backup Database
h4. 11) History
h4. 12) References
h2. 1) Install Linux Ubuntu
The following assumes you have installed Ubuntu 11.10 Desktop Edition for AMD 64-bit, or upgraded from a previous version. Keep in mind that Oracle 11gR2 Express Edition is only available for 64-bit architecture. It is not necessarily a requirement, but I would not bother to install Oracle 11gR2 XE on a system with less than 2 GB of RAM installed. You can download Ubuntu for free at: http://www.ubuntu.com/download/ubuntu and install it using the default settings provided.
You can apply the latest OS patch-sets by clicking the power button icon in the upper right hand corner of the screen and selecting "Updates available..."
h2. 2) Remote Terminal
You will need command line access to perform the installation tasks. Select the top "Dash Home" button of the Unity toolbar and enter the word "terminal", or use CTRL-ALT-t. If you prefer to open a remote terminal session use SSH. Ubuntu does not come with a secure shell login by default. To install it, use the following command:
sudo apt-get install openssh-serverYou cannot login as root unless you set a root password using the "sudo passwd root" command. However, you can get root user access using the "sudo" command, which requires only to re-enter the password of your personal account. Access to "sudo" is controlled by the /etc/sudoers file.
The best way to establish a remote command line session as root is to login with your personal account, e.g.: ssh [email protected], and then type "sudo su -" to become root, or use "sudo <command>" to execute individual commands. If your account does not have "sudo" access you can login as root using "su - root", but will need to know the root password.
h2. 3) Install Additional Software
Oracle 11g Express Edition requires additional software that is not installed by default:
sudo apt-get install alien libaio1 unixodbch2. 4) Managing Swap Space
Oracle demands that the minimum swap space for Oracle Database XE is 2 GB (2095100 KB) or twice the size of RAM, whichever is lesser. Enter the following shell command to verify your swap space:
cat /proc/meminfo | grep -i swap
SwapCached:            0 kB
SwapTotal:       2095100 kB
SwapFree:        2095100 kBYou can increase available swap space by using a swap file as long as disk space permits. The advantage of a swap file versus a swap partition is flexible space management because you can add or delete swap space on demand as necessary. The following will create and enable an additional 1 GB swap file at system startup, located in the /home directory:
Login as root:
sudo su -Enter the following commands:
dd if=/dev/zero of=/home/swapfile bs=1024 count=1048576
mkswap /home/swapfile
swapon /home/swapfile
swapon -aCreate a backup of the original "fstab" file and add the new swap file:
cp /etc/fstab /etc/fstab.backup_`date +%N`
echo '/home/swapfile swap swap defaults 0 0' >> /etc/fstabExit from root and verify the new swap space:
exit
swapon -s
Filename                    Type          Size     Used     Priority
/dev/sda5                               partition     2095100     0     -1
/home/swapfile                          file          1048572     0     -2Swap space is not a substitute for installed RAM. Swap space is a safeguard that allows the system to move idle processes to disk before the OOM killer will begin to terminate processes in order to free up enough real memory to keep the system operational. The general rule for sizing the swap space depends on the size of installed RAM. If your system has less then 4 GB of RAM the swap space should usually be at least twice this size. If you have more than 8 GB of RAM installed you may consider to use an equal size as swap space. The more RAM you have installed, the less likely you are going to run into memory starvation, and the less likely you are going to need swap space, unless you have a bad process.
h2. 5) Modify Kernel Parameters
Oracle 11gR2 Express Edition requires the following Kernel parameters. Enter the commands exactly as shown:
Login as root:
sudo su -Cut & paste the following directly into a command shell (not a text editor):
cat > /etc/sysctl.d/60-oracle.conf <<-EOF
# Oracle 11g XE kernel parameters
fs.file-max=6815744
net.ipv4.ip_local_port_range=9000 65500
kernel.sem=250 32000 100 128
# kernel.shmmax=429496729
kernel.shmmax=107374183
EOFLoad and verify the new kernel parameters:
service procps start
sudo sysctl -q fs.file-max
sudo sysctl -q kernel.shmmax
sudo sysctl -q net.ipv4.ip_local_port_range
sudo sysctl -q kernel.sem The SHMMAX kernel parameter defines the upper memory limit of a process. It is a safeguard to stop a bad process from using all memory and causing RAM starvation. The Linux default is 32 MB. The official Oracle XE installation documentation suggests a value of 4 GB -1 bytes (429496729). Since Oracle 11g XE has a 1 GB memory limit, a smaller footprint will be a better safeguard for the complete system. Setting the SHMMAX parameter to 107374183 will be sufficient.
h2. 6) Oracle Home Directory
At the time of this writing, Enterprise Linux 6 is not supported for Oracle database yet. It is therefore not possible to confirm Oracle ext4 filesystem compatibility, which is default in Ubuntu 11. According to various information, ext4 may cause a performance problem for Oracle 11g database. The following will show you how to add a ext3 partition to your existing setup.
h3. 6.a) Resize the Root Partition
Provided you have sufficient free disk space, you should be able to resize the root partition to create an extra ext3 filesystem. Considering the 11 GB user datafile limit of the Express Edition, 18 GB should be more than enough.
You can use the free Gparted Live CD to shrink your startup volume. Gparted downloads are available at http://sourceforge.net/projects/gparted/files/gparted-live-stable. When burning the CD, pay attention to burn the raw .iso image and not the possibly "mounted" image. If you are using a virtual machine like Oracle Virtualbox, you can mount the .iso image directly. There are going to be a few prompts when the system starts from the CD, but you can press Return to accept the defaults.
When the Gparted window appears:
- Select your ext4 root partition, usually /dev/sda1
- Select the "Resize/Move" button from the toolbar.
- Enter 18000 into the "Free space following" field and press the Return key.
Be careful not not change the start of the partition!
- Click the "Resize/Move" of the dialog and then then the "Apply" toolbar button.
The process may take several minutes - do not abandon it!
- Select the new unallocated free space of ~ 18 GB and push the "New" button.
- Set the file system to "ext3" and label it "oraclexe" and click the "Add" button.
Be sure to label it oraclexe, otherwise the follow-up instructions will fail.
- Finally select "Apply from the toolbar to apply the changes.
- Quit "Gparted", select "Exit" from the desktop and choose "Reboot" to restart the system.
{code}
After the system has restarted, open a terminal command shell.
Login as root:
{code}
sudo su -
{code}
Backup "fstab" and add the UUID of the partition. The "tr" command remove the quotes:
{code}
cp /etc/fstab /etc/fstab_`date +%N`
uuid=`blkid | grep oraclexe | awk '{print $3}'`
uuid=`echo $uuid | tr -d '\042'`
echo $uuid
echo "$uuid /u01 ext3 errors=remount-ro 0 1" >> /etc/fstab
{code}
The UUID is a unique number and should look similar to:
{code}
UUID=d1db753e-b5dd-4a4c-a61e-259c69867b58
{code}
Restart the system:
{code}
reboot
{code}
Verify the success:
{code}
df -h /u01
{code}
h3. 6.b) Setup External Storage
If you prefer to setup an external drive to install Oracle XE, beware that it can be a fatal mistake to make an entry in /etc/fstab to automount your external storage device. An unavailable device in /etc/fstab will prevent a system startup and prompt for appropriate actions at the console.
The following is an example of how to prepare an external storage device to be used for Oracle 11g, including a script to automatically mount an external drive at system startup without the disadvantages of /etc/fstab. The script will also take into consideration that a device name might shift if you attach additional devices.
To find out which USB devices are connected:
{code}
sudo parted -l
{code}
Look for the device that matches your USB storage. For example: /dev/sdb1
{code}
Model: USB 2.0 Flash Disk (scsi)
Disk /dev/sdb: 2064MB
Sector size (logical/physical): 512B/512B
Partition Table: gpt
Number Start   End     Size    File system Name     Flags
1      20.5kB 1929MB 1929MB hfs+         mystick
{code}
Initialize the device using ext3 filesystem - this will erase all data. The "-c" option will check for bad blocks (read-only), "-L" is the volume label:
{code}
sudo umount /dev/sdb1
sudo mkfs.ext3 -c -L oraclexe /dev/sdb1
{code}
Install the pmount distribution package:
{code}
sudo apt-get install pmount
{code}
Login as root:
{code}
sudo su -
{code}
Cut & paste the following into the command prompt (not a text editor):
{code}
cat > /etc/init.d/oracle-mount <<-EOF
#! /bin/sh
# /etc/init.d/oracle-mount
VOL_UUID=alphanumeric
VOL_LABEL=oraclexe
VOL_SYMLINK=/u01
mount=/usr/bin/pmount
uuid2dev() {
   VOL_DEVICE="\`blkid | grep \$VOL_UUID | awk '{print \$1}'\`"
   VOL_DEVICE="\`echo \$VOL_DEVICE | tr -d ':'\`"
   echo \$VOL_DEVICE
case "\$1" in
start)
    echo "Starting script /etc/init.d/oracle-mount"
    uuid2dev
    \$mount \$VOL_DEVICE \$VOL_LABEL
    if [ -d /media/\$VOL_LABEL ]; then
       echo "Mount \$VOL_DEVICE success"
       ln -sf /media/\$VOL_LABEL \$VOL_SYMLINK
    else
       echo "Error mouting \$VOL_DEVICE"
    fi
stop)
    echo "Stopping script /etc/init.d/oracle-mount"
    uuid2dev
    /bin/umount \$VOL_DEVICE 2>/dev/null
    if [ "\`/usr/bin/pmount | /bin/grep \$VOL_DEVICE\`" ]; then
       echo "Error unmounting \$VOL_DEVICE"
    else
       rm -f \$VOL_SYMLINK
    fi
    echo "Usage: /etc/init.d/oracle-u01 {start|stop}"
    exit 1
esac
### BEGIN INIT INFO
# Provides:          oracle-mount
# Required-Start:    \$remote_fs \$syslog
# Required-Stop:     \$remote_fs \$syslog
# Default-Start:     2 3 4 5
# Default-Stop:      0 1 6
# Short-Description: Start daemon at boot time
# Description:       Mount hotplug-usb drive and create symlink
### END INIT INFO
EOF
{code}
Install the oracle-mount init script:
{code}
chmod 755 /etc/init.d/oracle-mount
update-rc.d oracle-mount defaults 01 99
{code}
Get the UUID of the volume "oraclexe" and update the VOL_UUID in the init script accordingly:
{code}
uuid=`blkid | grep oraclexe | awk '{print $3}'`
echo $uuid
sed -i "s/^VOL_UUID=.*/VOL_$uuid/g" /etc/init.d/oracle-mount
{code}
The UUID of your device will be a unique number, but should be similar to:
{code}
UUID="3f5e9963-b328-49f3-b3e8-a3561ae34106"
{code}
Logout of root and test the init script:
{code}
exit
sudo /etc/init.d/oracle-mount stop
ls /u01
sudo /etc/init.d/oracle-mount start
ls /u01
{code}
Your output should look like:
{code}
Stopping script /etc/init.d/oracle-mount
/dev/sdb1
ls: cannot access /u01: No such file or directory
Starting script /etc/init.d/oracle-mount
/dev/sdb1
Mount /dev/sdb1 success
lost+found
{code}
h2. 7) ORA-00845: MEMORY_TARGET
Oracle 11gR2 XE under Ubuntu 11.10 will result in "ORA-00845: MEMORY_TARGET not support on this system" either at Oracle database startup or during the initial installation. Ubuntu 11.10 uses a new version of the "systemd" system and session manager and has migrated away from /dev/shm and other common directories in favor of /run.
There are several ways how to address the problem. You can either enable /dev/shm shared memory, or change the default memory management of Oracle 11g from AMM (Automatic Memory Management) to ASMM (Automatic Shared Memory Management) as it was in used the previous 10g version. Since AMM is one of the new features of 11g, the following will show you how to make to make AMM work.
Login as root:
{code}
sudo su -
{code}
Cut & paste the following into the command prompt (not a text editor):
{code}
cat > /etc/init.d/oracle-shm <<-EOF
#! /bin/sh
# /etc/init.d/oracle-shm
case "\$1" in
start)
    echo "Starting script /etc/init.d/oracle-shm"
    # Run only once at system startup
    if [ -e /dev/shm/.oracle-shm ]; then
      echo "/dev/shm is already mounted, nothing to do"
    else
      rm -f /dev/shm
      mkdir /dev/shm
      mount -B /run/shm /dev/shm
      touch /dev/shm/.oracle-shm
    fi
stop)
    echo "Stopping script /etc/init.d/oracle-shm"
    echo "Nothing to do"
    echo "Usage: /etc/init.d/oracle-shm {start|stop}"
    exit 1
esac
### BEGIN INIT INFO
# Provides:          oracle-shm
# Required-Start:    $remote_fs $syslog
# Required-Stop:     $remote_fs $syslog
# Default-Start:     2 3 4 5
# Default-Stop:      0 1 6
# Short-Description: Bind /run/shm to /dev/shm at system startup.
# Description:       Fix to allow Oracle 11g use AMM.
### END INIT INFO
EOF
{code}
Install the oracle-shm init script:
{code}
chmod 755 /etc/init.d/oracle-shm
update-rc.d oracle-shm defaults 01 99
{code}
Restart the system:
{code}
reboot
{code}
Verify the success:
{code}
sudo cat /etc/mtab | grep shm
{code}
{code}
none /run/shm tmpfs rw,nosuid,nodev 0 0
/run/shm /dev/shm none rw,bind 0 0
{code}
The upper limit of shared memory under Linux is set to 50 % of the installed RAM by default. If your system has less than 2 GB of RAM installed, there is still a chance to run into ORA-00845 error if your shared memory is used by other software.
The verify available shared memory, type the following commands:
{code}
sudo df -h /run/shm
{code}
h2. 8) Installing Oracle 11gR2 Express Edition
The final release version of Oracle 11gR2 Express Edition can be downloaded for free at http://otn.oracle.com/database/express-edition/downloads. The software should automatically downloaded into the "Downloads" folder of your home directory.
Enter the following commands to unpack the installer:
{code}
cd ~/Downloads
unzip oracle-xe-11.2.0-1.0.x86_64.rpm.zip
rm oracle-xe-11.2.0-1.0.x86_64.rpm.zip
{code}
The Debian Linux based package management of Ubuntu is not compatible with the Red Hat package manager. The Oracle installer needs to be converted using the following commands:
{code}
cd ~/Downloads/Disk1
sudo alien --to-deb --scripts oracle-xe-11.2.0-1.0.x86_64.rpm
(This may take a few minutes)
rm oracle-xe-11.2.0-1.0.x86_64.rpm
{code}
The following needs to be set for compatibility:
{code}
sudo ln -s /usr/bin/awk /bin/awk
sudo mkdir /var/lock/subsys
{code}
Ubuntu uses different tools to manage services and system startup scripts. The "chkconfig" tool required by the Oracle installer is not available in Ubuntu. The following will create a file to simulate the "chkconfig" tool.
Login as root:
{code}
sudo su -
{code}
Copy & paste the following *directly* into the command prompt to create a file:
{code}
cat > /sbin/chkconfig <<-EOF
#!/bin/bash
# Oracle 11gR2 XE installer chkconfig hack for Debian based Linux (by dude)
# Only run once.
echo "Simulating /sbin/chkconfig..."
if [[ ! \`tail -n1 /etc/init.d/oracle-xe | grep INIT\` ]]; then
cat >> /etc/init.d/oracle-xe <<-EOM
### BEGIN INIT INFO
# Provides:                  OracleXE
# Required-Start:        \\\$remote_fs \\\$syslog
# Required-Stop:        \\\$remote_fs \\\$syslog
# Default-Start:            2 3 4 5
# Default-Stop:            0 1 6
# Short-Description:   Oracle 11g Express Edition
### END INIT INFO
EOM
fi
update-rc.d oracle-xe defaults 80 01
EOF
{code}
Exit root:
{code}
exit
{code}
Set execute privileges:
{code}
sudo chmod 755 /sbin/chkconfig
{code}
Install Oracle 11gR2 Express Edition entering the following commands:
{code}
cd ~/Downloads/Disk1
sudo dpkg --install ./oracle-xe_11.2.0-2_amd64.deb
(This may take a couple of minutes)
{code}
Run the configuration script to create (clone) the database and follow the screen. Accept the default answers, including "y" to startup the database automatically, or modify as required.
{code}
sudo /etc/init.d/oracle-xe configure
(This can take a few minutes - the installation completed successfully.)
{code}
To verify success, the procedure should end showing:
{code}
Starting Oracle Net Listener...Done
Configuring database...Done
Starting Oracle Database 11g Express Edition instance...Done
Installation completed successfully.
{code}
Set a password for the Oracle account:
{code}
sudo passwd oracle
{code}
h2. 9) Post-Installation
In order to use sqlplus and other tools, the Oracle account requires specific environment variables. The following will set these variables automatically at every Oracle login:
Login as the Oracle user:
{code}
su - oracle
{code}
Copy the default account skeleton files and add the Oracle env script to .profile:
{code}
cp /etc/skel/.bash_logout ./
cp /etc/skel/.bashrc ./
cp /etc/skel/.profile ./
echo "" >>./.profile
echo '. /u01/app/oracle/product/11.2.0/xe/bin/oracle_env.sh' >>./.profile
{code}
By default, the Oracle Database XE graphical user interface is only available at the local server, but not remotely. The following will enable remote logins:
Login as the Oracle user:
{code}
su - oracle
{code}
Login as SYSDBA and execute the following:
{code}
sqlplus / as sysdba
SQL> EXEC DBMS_XDB.SETLISTENERLOCALACCESS(FALSE);
exit
{code}
See http://download.oracle.com/docs/cd/E17781_01/admin.112/e18585/toc.htm for more information.
h3. a) Unity desktop configurations
The Oracle XE menu under the previous Gnome Classic desktop shows several useful scripts to backup the database, start and stop the database, etc. Under the Unity based desktop this menu is not available. You can either switch to the Gnome Classic desktop as outlined in chapter 2, or perform the following steps to modify and copy the scripts as outlined below. The start and stop database scripts will also be modified to perform a progress feedback.
Login as user root:
{code}
sudo su -
{code}
Convert desktop files:
{code}
cd /usr/share/applications
sed -i 's/Categories.*/Categories=Database;Office;Development;/g' oraclexe*
sed -i 's/MultipleArgs/X-MultipleArgs/g' oraclexe*
sed -i 's/MimeType.*/MimeType=application\/x-database/g' oraclexe*
sed -i 's/.png//g' oraclexe*
sed -i 's/Terminal=false/Terminal=true/g' oraclexe-startdb.desktop
sed -i 's/Terminal=false/Terminal=true/g' oraclexe-stopdb.desktop
{code}
Exit root:
{code}
exit
{code}
Login as user Oracle:
{code}
su - oracle
{code}
Modify database start and stop scripts:
{code}
cd /u01/app/oracle/product/11.2.0/xe/config/scripts
cp startdb.sh start.sh_orig
cp stopdb.sh stopdb.sh_orig
sed -i 's/>.*//g' startdb.sh
sed -i 's/>.*//g' stopdb.sh
{code}
You will need SYSDBA privileges and set Oracle environment variables in order to use your regular user account.
Login to your regular user account:
{code}
su - dude
{code}
Enter the folowing command:
{code}
sudo usermod -a -G dba dude
{code}
Then update your profile to automatically set the necessary Oracle environment variables:
{code}
echo "" >>./.profile
echo '. /u01/app/oracle/product/11.2.0/xe/bin/oracle_env.sh' >>./.profile
{code}
Update your Desktop folder to contain useful Oracle XE scripts:
{code}
cp /usr/share/applications/oraclexe* ~/Desktop
chmod 750 ~/Desktop/oraclexe*
{code}
To verify success re-login and try "sqlplus":
{code}
su - oracle
sqlplus / as sysdba
{code}
h2. 10) Tips and Troubleshooting
h3. 10. a) Port 1521 appears to be in use by another application
Error: Port 1521 appears to be in use by another application. Specify a different port.This error happens after a previously unsuccessful configuration attempt using /etc/init.d/oracle-xe configure script. The script was able to start the Listener process, but most likely failed to continue to clone the database, e.g. ORA-00845. The following should correct the problem:
Determine the oracle listener process that is already running:
{code}
$ ps -ef | grep oracle
{code}
Your output should be similar to:
{code}
oracle   19789     1 0 19:46 ?        00:00:00 /u01/app/oracle/product/11.2.0/xe/bin/tnslsnr
{code}
Then kill the process, using the appropriate process id, for instance:
{code}
$ sudo kill -9 19789
{code}
h3. 10.b) cannot touch `/var/lock/subsys/listener': No such file or directory
Starting Oracle Net Listener...touch: cannot touch `/var/lock/subsys/listener': No such file or directoryThis error occurs when you run /etc/init.d/oracle-xe configure, but failed the preinstallation step to create the /var//lock/subsys directory as outlined in chapter 8.
h3. 10.c) ORA-00845: MEMORY_TARGET
ORA-00845: MEMORY_TARGET not supported on this system See chapter 7 to enable /dev/shm and verify free space available in /run/shm
h3. 10.d) Apex ADMIN password
According to the Oracle documentation, the password for the INTERNAL and ADMIN Oracle Application Express user accounts is initially the same as the SYS and SYSTEM administrative user accounts. Well, I tried several times without success. To reset the Apex Admin password:
Login as user oracle:
{code}
su - oracle
{code}
Login as SYSDBA and type the following:
{code}
sqlplus / as sysdba
{code}
At the SQL prompt, type the following to be prompted to change the password:
{code}
SQL> @?/apex/apxxepwd.sql
exit
{code}
When done, open your browser and go to http://127.0.0.1:8080/apex
Workspace: Internal
Username: ADMIN
Password: password you set with apxxepwd.sql
I will prompt you to reset the password:
old password: password you set with apxxepwd.sql
new password: final_password
You can also login as the Apex Admin using http://127.0.0.1:8080/apex/apex_admin
h3. 10.e) SYS and SYSTEM password
Use the following commands to reset the SYS and SYSTEM passwords if necessary:
Login as the Oracle user:
{code}
su - oracle
{code}
Login as SYSDBA and type the following at the SQL prompt:
{code}
sqlplus / as sysdba
SQL> alter user sys identified by "password" account unlock;
SQL> alter user system identified by "password" account unlock;
SQL> exit
{code}
h3. 10.f) Uninstall Oracle 11g XE
The following will completely uninstall and remove Oracle 11g XE:
Open a terminal seesion and login as user root:
{code}
sudo su -
{code}
Enter the following:
{code}
/etc/init.d/oracle-xe stop
dpkg --purge oracle-xe
rm -r /u01/app
rm /etc/default/oracle-xe
update-rc.d -f oracle-xe remove
update-rc.d -f oracle-mount remove
update-rc.d -f oracle-shm remove
{code}
h3. 10.g) Reconfigure Oracle 11g XE
Type the following commands in a terminal window:
{code}
sudo /etc/init.d/oracle-xe stop
sudo rm /etc/default/oracle-xe
sudo /etc/init.d/oracle-xe configure
{code}
h3. 10.h) Gnome Classic desktop
Ubuntu 11 moved from the Gnome Classic desktop to Unity and removed the "Ubuntu Classic" login option. Unity was designed to make more efficient use of space given a limited screen size and touch screens. If you prefer to use the Gnome Classic desktop, enter the following into a terminal window:
{code}
sudo apt-get install gnome-panel
{code}
To log into the Gnome Classic desktop, select the "Gearwheel" at the login screen and select "Gnome Classic".
h3. 10.i) Unix vi cursor keys
The instructions in this tutorial do not require the use of any text editor. However, if you would like use the backspace and cursor keys in the "vi-editor", the following needs to be installed:
{code}
sudo apt-get install vim
{code}
h3. 10.j) Backup Database
In order to perform an online database backup using the supplied "Backup Database" script, the database needs to run in Archive-Log mode. This can be setup using the following commands:
Login as the Oracle user:
{code}
su - oracle
{code}
Login as SYSDBA and type the following:
{code}
sqlplus / as sysdba
SQL> shutdown immediate
SQL> startup mount
SQL> alter database archivelog;
SQL> alter database open;
SQL> exit
{code}
h2. 11) History
Version: A, 24-Oct-2011
- first release
Version: B, 25-Oct-2011
- reduced instructions.
- corrected errors in 6a and 8.
- new strategy addressing ORA-00845 error.
- rework of chapter 10.
Version: C, 30-Nov-2011
- corrected typo in 6a
- new procedures in 9a.
- added progress feedback to database scripts.
Version D, 14-Jan-2012
- corrected presentation errors.
- reorganized instructions.
h3. 12) References
http://download.oracle.com/docs/cd/E17781_01/install.112/e18802/toc.htm
http://askubuntu.com/questions/57297/why-has-var-run-been-migrated-to-run
http://lwn.net/Articles/436012/
https://forums.oracle.com/forums/thread.jspa?threadID=2300750&tstart=0
Kind regards and best of luck!
Dude.

Excellent Blog. Thank You
Small clarification on Step **6) Oracle Home Directory, ...a) Resize the Root Partition**
Ubuntu 11.10 has Gparted available as a Ubuntu software download, DONT use that while trying the above step, instead download the ISO file from http://sourceforge.net/projects/gparted/files/gparted-live-stable/ gparted-live-0.12.0-5.iso (124.6 MB)
Burn that ISO file on a Blank DVD, reboot the Ubuntu , during startup select Boot from DVD Option if not already selected. this will take to Boot Menu Options of Gparted Live then select the first menu option, and this allows to do further action such as Re-sizing .
and once you have chosen and executed step a) . do NOT run step b) also that is "Setup External Storage"
I hope this minor clarification can avoid some confusion
Regards
Madhusudhan Rao
Edited by: MadhusudhanRao on Mar 24, 2012 11:30 PM

Install Oracle 11gR2 Express Edition on Ubuntu Linux 11.04 (64-bit) Howto

h2. Install Oracle 11gR2 Express Edition on Ubuntu Linux 11.04 (64-bit) Howto
Version: B
Author: Dude, 24. May 2011
The following are step by step instructions how to install Oracle 11gR2 Express Edition (Beta) under Linux Ubuntu 11.04, 64-bit.
Access to the Internet is required.
The instructions cover the following additional topics:
- Converting Red Hat based Oracle XE installer to Ubuntu.
- Work-around for missing /sbin/chkconfig tool.
- Install Oracle XE into a different directory or disk volume.
- Relocate and configure the Oracle user and default login directory.
- Uninstall, reconfigure and perform first database backup.
- Notes and web links.
- Troubleshooting
h3. A) System Setup and Prerequisites
h4. A.1. System Access
You will need terminal command line, root and system console access to perform the setup tasks.
To open a Terminal at the system console:
Menu Applications > Accessories > TerminalThe following commands will enable remote ssh login with root access:
sudo apt-get install openssh-server
sudo passwd root
Verify:
ssh root@xe_server_host_nameh4. A.2. Software Prerequisites
The following is required in order to install Oracle 11gR2 XE:
sudo apt-get install alien libaio1 unixodbcThe following is not required, but it will fix backspace and arrow keys in case you prefer using the vi-editor:
sudo apt-get install vimh4. A.3. System Swap space
Minimum swap space required is 2 GB. You can increase swap space if necessary using a swap file:
To analyze current swap space and memory configuration:
sudo cat /proc/meminfo
To install a 1 GB swapfile named swapfile in /, for example:
sudo dd if=/dev/zero of=/swapfile bs=1024 count=1048576
(this may take a while)
sudo mkswap /swapfile
sudo swapon /swapfile
sudo cp /etc/fstab /etc/fstab.orig
sudo echo '/swapfile swap swap defaults 0 0' >> /etc/fstab
Verify:
sudo swapon -a
sudo swapon -sh4. A.4. Kernel Parameters
Oracle 11g XE requires the following additional kernel parameters:
sudo nano /etc/sysctl.d/60-oracle.conf
(Enter the following)
# Oracle 11g XE kernel parameters
fs.file-max=6815744
net.ipv4.ip_local_port_range=9000 65000
kernel.sem=250 32000 100 128
kernel.shmmax=536870912
(Save the file)
Note: kernel.shmmax = max possible value, e.g. size of physical RAM.
Verify: sudo cat /etc/sysctl.d/60-oracle.conf
Load new kernel parameters:
sudo service procps start
Verify:
sudo sysctl -q fs.file-max
-> fs.file-max = 6815744h4. A.5. Oracle Installation Directory
The current Oracle Installation Guide uses the same directory like in previous versions: /usr/lib/oracle/xe/app/oracle/product/11.2.0/server. However, the current Beta installation uses Oracle Flexible Architecture (OFA) and installs into /u01/app/oracle/product/11.2.0/xe. Due to size limitations of Oracle XE it may not be necessary to store the installation to a specific directory or separate volume, but it is possible:
Install Oracle XE to separate disk volume:
From the system console menu: System > Administration > Disk Utility
Select "ext3" filesystem for Oracle compatibility and specify a Volume label, e.g. Oracle.
Notice the device name e.g. /dev/sdb
Get the drive UUID:
sudo blkid
e.g. /dev/sdb: UUID="d19a2d8f-da43-4802-8bdb-0703c855e23a"
Modify /etc/fstab to automatically mount the volume at system startup:
sudo cp /etc/fstab /etc/fstab.original
sudo nano /etc/fstab
(Add the following, using determined UUID, for exmple)
UUID=d19a2d8f-da43-4802-8bdb-0703c855e23a /u01 ext3 defaults,errors=remount-ro 0 1
(Save the file)
Create the mount-point, mount the new volume and set ownership and privileges:
sudo mkdir /u01
sudo mount -a
sudo chown root:root /u01
sudo chmod 755 /u01
Verify:
df -h
or restart the systemYou can also install Oracle XE into a specific directory:
Create a symbolic link to store the installation into an existing directory, for instance:
sudo mkdir /home/oracle-xe
sudo ln -s /home/oracle-xe /u01h3. C) Oracle 11g XE Download and Installation
h4. C.1. Download and convert the Installer from Red Hat to Ubuntu
Please see section E.3. to download the Oracle 11gR2 XE installer.
Select the version listed for Linux x64.
sudo unzip linux.x64_11gR2_OracleXE.zip
sudo alien --to-deb --scripts oracle-xe-11.2.0-0.5.x86_64.rpm
(This may take a while)h4. C.2. Create a special chkconfig script
The Red Hat based installer of Oracle XE 11gR2 beta relies on +/sbin/chkconfig+, which is not used in Ubuntu. The chkconfig package available for the current version of Ubuntu produces errors and my not be safe to use. Below is a simple trick to get around the problem and install Oracle XE successfully:
Create /sbin/chconfig:
sudo nano /sbin/chkconfig
(Cut and paste the following)
#!/bin/bash
# Oracle 11gR2 XE installer chkconfig hack for Debian by Dude
file=/etc/init.d/oracle-xe
if [[ ! `tail -n1 $file | grep INIT` ]]; then
   echo >> $file
   echo '### BEGIN INIT INFO' >> $file
   echo '# Provides:             OracleXE' >> $file
   echo '# Required-Start:       $remote_fs $syslog' >> $file
   echo '# Required-Stop:        $remote_fs $syslog' >> $file
   echo '# Default-Start:        2 3 4 5' >> $file
   echo '# Default-Stop:         0 1 6' >> $file
   echo '# Short-Description:    Oracle 11g Express Edition' >> $file
   echo '### END INIT INFO' >> $file
fi
update-rc.d oracle-xe defaults 80 01
(Save the file)
Set appropriate execute privileges:
chmod 755 /sbin/chkconfig
Note: You should remove the /sbin/chkconfig file after successful installation of Oracle XE.
h4. C.3. Install and configure Oracle XE
sudo dpkg --install ./oracle-xe_11.2.0-1.5_amd64.deb
/etc/init.d/oracle-xe configure
(This will take a while)
Remove the /sbin/chkconfig script, which is no longer needed.
sudo rm /sbin/chkconfigh4. C.4. Relocate and Configure the Oracle user login
The Oracle XE installer specifies /u01/app/oracle as the login directory for the Oracle user. Although not really necessary, the following will relocate the Oracle user $HOME to a standard location and create standard /etc/skel login files:
Exit all Oracle user sessions:
sudo /etc/init.d/oracle-xe stop
sudo kill -9 `ps -ef | grep oracle | grep -v grep | awk '{print $2}'`
sudo userdel oracle
sudo useradd -s /bin/bash -G dba -g dba -m oracle
sudo passwd oracle
Verify:
sudo id oracle
-> uid=1001(oracle) gid=1001(dba) groups=1001(dba)h4. C.5. Setup Oracle environment variables
In order to use sqlplus and other tools, the Oracle account requires certain environment variables. The following will set these variables automatically at every interactive Oracle login:
sudo echo '. /u01/app/oracle/product/11.2.0/xe/bin/oracle_env.sh' >> /home/oracle/.bashrch4. C.6. Oracle sudo root access
It is not essential to allow the Oracle user to use sudo, but it is convenient:
usermod -G admin oracle
Verify:
id oracle
-> uid=1001(oracle) gid=1001(dba) groups=1001(dba),120(admin)
sudo su -
-> Enter Oracle account passwordh4. C.7. Oracle 11g XE Post-installation
After you install Oracle Database XE, its graphical user interface is only available from the local server, but not remotely.
The following will correct the problem if necessary:
Login as user Oracle or use:
su - oracle
sqlplus / as sysdba
At the SQL prompt, enter the following command:
EXEC DBMS_XDB.SETLISTENERLOCALACCESS(FALSE);
exith3. D) Unintstall, Reconfigure and Troubleshooting
h4. D.1. Uninstall Oracle 11g XE
The following will completely uninstall and remove Oracle 11g XE:
Login as user root:
sudo su -
/etc/init.d/oracle-xe stop
dpkg --purge oracle-xe
rm -r /u01/app
rm /etc/default/oracle-xe
update-rc.d -f oracle-xe removeh4. D.2. Reconfigure Oracle 11g XE
Type the following in a terminal window:
/etc/init.d/oracle-xe stop
sudo rm /etc/default/oracle-xe
/etc/init.d/oracle-xe configureh4. D.3. Enable Archivelog mode and perform a database backup
Login as user Oracle:
su - oracle
sqlplus / as sysdba
At the SQL prompt, enter the following commands:
shutdown immediate
startup mount
alter database archivelog;
alter database open;
exit
Login to system console of the Oracle user account:
Select Applications > Oracle Database 11g Express Edition > Backup Databaseh3. E) Notes
h4. E.1. Oracle 11g XE limitiations overview
- It will consume, at most, processing resources equivalent to one CPU.
- Only one installation of Oracle Database XE can be performed on a single computer.
- The maximum amount of user data in an Oracle Database XE database cannot exceed 11 GB.
- The maximum amount of RAM that Oracle XE uses cannot exceed 1 GB, even if more is available.
- HTTPS is not supported natively with the HTTP listener built into Oracle Database XE.
h4. E.2. Documentation and Links
Official documentation for Oracle 11gR2 XE can be found at:
http://www.oracle.com/pls/xe112/homepage
h4. E.3. Oracle 11g XE downloads
The Installer is available from the Oracle Technology Network at:
http://www.oracle.com/technology/products/database/xe
http://www.oracle.com/technetwork/database/express-edition/downloads/index.html
h4. E.4 APEX links and archives
The APEX archives can be found at:
http://www.oracle.com/technetwork/developer-tools/apex/application-express/all-archives-099381.html
The APEX download site is:
http://www.oracle.com/technetwork/developer-tools/apex/downloads/index.html
h3. F) Troubleshooting
... in progress
Regards and best of luck!
Edited by: Dude on May 25, Version B: various corrections. chkconfig package (A.2.) not required.

even though I am admin user.Admin user is a MS Windows term, that does not apply to Linux or Unix in the same fashion.
The configuration script tells you "You must be root user to run the configure script. Login as root user and
then run the configure script."
This is most likely correct because your account is not root and does not have UID 0. What you can do is to login as root e.g. sudo su -, as the message suggest, or use "sudo /etc/init.d/oracle-xe configure", provided your account is defined in the /etc/sudoers file to perform root/admin actions.
Btw, do not modify /etc/passwd and /etc/group to give you admin privileges or try to create a another root account under a different name. That's not the way it works and usually leads to nasty problems.

Can't uninstall or reinstall oracle 10g express edition in w/server 2003

Hi,
I need help from all of you, i already install oracle 10g express edition in
windows server 2003 in D drive. but i can't remove because the oracle not in
the add remove program so i download the windows install clean up to remove
but after remove it still in the all program i still can start and stop the
database but can't go to the database home page.The error message (the install
cannot proceed as service OracleServiceXE is present on the system. Remove the
service , reboot the systemand retry the installation) can any one guide me to use
command prompt to remove.
My email address [email protected]
Thanks

Hi,
Perform the following steps, this will solve your problem and can go with new installation. :-)
(Only perform the steps 7.2 section and here is the link : http://download.oracle.com/docs/cd/B25329_01/doc/install.102/b25143/toc.htm#BABDJDCD
Manually Removing Oracle Database XE
If the deinstallation is interrupted, follow these steps to manually remove Oracle Database XE from your computer:
Step 1: Stop the Oracle Database XE Services
Step 2: Remove the Oracle Database XE Registry Editor Settings
Step 3: Update the System Variable Path
Step 4: Remove Oracle Database XE from the Start Menu and Desktop
Step 5: Remove the Oracle Database XE Directories
Step 6: Install and Run the Windows Installer CleanUp Utility
7.2.1 Step 1: Stop the Oracle Database XE Services
Follow these steps:
1. Open the Windows Services utility: From the Start menu, select All Programs, then Administrative Tools, and then Services.
2. If any of the following Oracle services exist and have the status Started, then select each of the services, and click Stop:
OracleXE
OracleXETNSListener
OracleJobSchedulerXE
OracleXEClrAgent
OracleMTSRecoveryService
3.
Exit Services.
See also the Microsoft online help for more information on stopping services.
7.2.2 Step 2: Remove the Oracle Database XE Registry Editor Settings
Follow these steps:
1.
Log on to Windows with Windows administrative privileges.
2.
Ensure that you followed the instructions under "Step 1: Stop the Oracle Database XE Services" to stop the Oracle Database XE services.
3.
Start the Registry Editor at a command prompt:
SYSTEM_DRIVE:\> regedit
4.
Go to HKEY_CLASSES_ROOT.
5.
Delete the following keys:
NEED TO CONFIRM THE XE-SPECIFIC ONES.
6.
Go to HKEY_CURRENT_USER\Software.
7.
Under Microsoft\Windows\CurrentVersion\Explorer\MenuOrder\Start Menu\Programs, delete the Oracle Database 10g Express Edition key.
8.
Go to HKEY_LOCAL_MACHINE\SOFTWARE and search for the ORACLE group key.
9.
Expand the ORACLE group key and then delete the KEY_XE and OracleMTSRecoveryService keys.
10.
Go to HKEY_LOCAL_MACHINE\SOFTWARE\ODBC\ODBCINST.INI.
11.
Expand the ODBCINST.INI key and remove the Oracle in XE key.
12.
Go to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services.
13.
Delete the following keys:
OracleServiceXE
OracleXEClrAgent
OracleXETNSListener
14.
Go to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Eventlog\Application.
15.
Delete the Oracle.xe key.
16.
Exit the Registry Editor.
17.
Restart your computer.
Thanks,
Rams...
Edited by: user10888288 on May 3, 2010 5:58 AM

"In-Memory Database Cache" option for Oracle 10g Enterprise Edition

Hi,
In one of our applications, we are using TimesTen 5.1.24 and Oracle 9i
databases (platform - Solaris 9i).
TimesTen holds application information which needs to be accessed quickly
and Oracle 9i is a master application database.
Now we are looking at an option of migrating from Oracle 9i to Oracle 10g
database. While exploring about Oracle 10g features, came to know about
"In-Memory Database Cache" option for Oracle Enterprise Edition. This made
me to think about using Oracle 10g Enterprise Edition with "In-Memory
Database Cache" option for our application.
Following are the advantages that I could visualize by adopting the
above-mentioned approach:
1. Data reconciliation between Oracle and TimesTen is not required (i.e.
data can be maintained only in Oracle tables and for caching "In-Memory
Database Cache" can be used)
2. Data maintenance is easy and gives one view access to data
I have following queries regarding the above-mentioned solution:
1. What is the difference between "TimesTen In-Memory Database" and
"In-Memory Database Cache" in terms of features and licensing model?
2. Is "In-Memory Database Cache" option integrated with Oracle 10g
installable or a separate installable (i.e. TimesTen installable with only
cache feature)?
3. Is "In-Memory Database Cache" option same as that of "TimesTen Cache
Connect to Oracle" option in TimesTen In-Memory Database?
4. After integrating "In-Memory Database Cache" option with Oracle 10g, data
access will happen only through Oracle sqlplus or OCI calls. Am I right here
in making this statement?
5. Is it possible to cache the result set of a join query in "In-Memory
Database Cache"?
In "Options and Packs" chapter in Oracle documentation
(http://download.oracle.com/docs/cd/B19306_01/license.102/b14199/options.htm
#CIHJJBGA), I encountered the following statement:
"For the purposes of licensing Oracle In-Memory Database Cache, only the
processors on which the TimesTen In-Memory Database component of the
In-Memory Database Cache software is installed and/or running are counted
for the purpose of determining the number of licenses required."
We have servers with the following configuration. Is there a way to get the
count of processors on which the Cache software could be installed and/or
running? Please assist.
Production box with 12 core 2 duo processors (24 cores)
Pre-production box with 8 core 2 duo processors (16 cores)
Development and test box with 2 single chip processors
Development and test box with 4 single chip processors
Development and test box with 6 single chip processors
Thanks & Regards,
Vijay

Hi Vijay,
regarding your questions:
1. What is the difference between "TimesTen In-Memory Database" and
"In-Memory Database Cache" in terms of features and licensing model?
==> Product has just been renamed and integrated better with the Oracle database - Times-Ten == In-Memory-Cache-Database
2. Is "In-Memory Database Cache" option integrated with Oracle 10g
installable or a separate installable (i.e. TimesTen installable with only
cache feature)?
==> Seperate Installation
3. Is "In-Memory Database Cache" option same as that of "TimesTen Cache
Connect to Oracle" option in TimesTen In-Memory Database?
==> Please have a look here: http://www.oracle.com/technology/products/timesten/quickstart/cc_qs_index.html
This explains the differences.
4. After integrating "In-Memory Database Cache" option with Oracle 10g, data
access will happen only through Oracle sqlplus or OCI calls. Am I right here
in making this statement?
==> Please see above mentioned papers
5. Is it possible to cache the result set of a join query in "In-Memory
Database Cache"?
==> Again ... ;-)
Kind regards
Mike

Creation of a Custom Folder in Oracle Discoverer Administration Edition

Hi
Could anybody help me in solving this problem while creating a Custom Folder in Oracle Discoverer Administration Edition ?
My Requirement is :
I Connect to EUL_US/EUL_US@<HOST_STRING> under Oracle Discoverer Administration Edition.
I selected a Pre-Defined Business Area Eg. General Ledger
There i created a Custom Folder by Name Test Custom Folder
The Query which i used in my Custom Folder is
SELECT NAME FROM GL.GL_JE_BATCHES
When i Used this Query it says Table or view does not exist.
The Folder is getting created but without a Query.
I am not able to preceed further.
Any Help would be appreciated
Regards
Nakul Venkataraman

Hi Nakul, you may be running into a problem with the sql for your custom folder. For some reason Discoverer Admin will allow you to create a custom folder with sql, but then if you change it and it has any advanced sql, i.e. grouping sets, analytic functions etc., you probably receive an error.
An option is to create a view using the same sql and create a folder from the database using this view.
Hope this helps.
Brent.

Odac 12.1 Oracle.VsDevTools Cannot edit query results

Similar Messages

Maybe you are looking for