OData and JSON light support, When?
Anybody knows when OData will be shipping with support for JSON light?? I'm kinda sick of those "_metadata" tags cluttering up my JSON.
Thanks!
Might ask them over here.
http://social.technet.microsoft.com/Forums/en-US/home?forum=powerquery
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.
Similar Messages
-
Flashing grean and orange light
i charged my new ipod shuffle over night and when i went to get it this morning i pressed play and it flashed green then orange then green then orange and it did that about 4 tiems before it stopped .. with no music playing or anything ... what should i do?
I keep getting the flashing orange and green light
then when i press and hold on the play button i only
get a constant orange light ! I have tried resetting,
restoring everything but i still getthesame message !
I am trying to sync from windows media player - does
anyone know how I can export this music onto itunes
????Please help !!!!
Import it into iTunes or burn it to CD as mp3 and Import/Add to iTunes library...
Regarding the lights: green and orange flashing sequence means you have NO playable music on your Shuffle.
Pressing and holding PLAY locks the Shuffles controls, signified by the orange light.
Have you read the manual?
http://manuals.info.apple.com/en/iPodshuffle_FeaturesGuide.pdf -
How to load photos on desktop to Recordable CD-R ? When I high light photos on desktop , click burn to disk and insert CD-R (when instructed ) nothing happens I eventually I get a box informing me the disk is not recognized. I' attempting to record 58MB of photos onto a blank 700 MB CD-R disk
Hi aidenpt23,
Welcome to the Support Communities!
The articles below may be able to help you with this.
OS X Lion: Burn a CD or DVD in the Finder
http://support.apple.com/kb/PH3807
Apple Computers: Troubleshooting the slot-loading SuperDrive
http://support.apple.com/kb/HT2801#
Cheers,
- Judy -
The flashlight in my iphone 4s keeps lighting even when it is switched off. I went through many articles and in those was mentioned presence of humidity could be one reason, but my phone was not prone to such conditions & it is the condition when i took it from its pouch. Kindly help
If the phone is offline there is no way to track it or send a message to it. You can place it in lost mode to lock it and send it a message (see http://help.apple.com/icloud/#/mmfc0f0165), but this will not take place until the phone goes back online, if it ever does. If it does, you will get an email informing you.
You might want to read this: http://support.apple.com/kb/HT5668. -
HP C5550. When turning power on, screen goes blank and front lights start flashing.
When turning power on, screen goes blank and front lights start flashing. I have unplugged and changed ink cartrides. What next?
Hello hmnshgrwl,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
Intel-based Macs: Resetting the System Management Controller (SMC)
http://support.apple.com/kb/ht3964
The System Management Controller (SMC) is responsible for many low-level functions on Intel-based Macs.
Best of luck,
Mario -
Lightroom 4 crashes when trying to open the slideshow module. I spent over three hours with both Adobe and Apple tech support and we know it is a permission issue but have not been able to get it solved. It started with the last upgrade to 10.8
Back up all data.
This procedure will unlock all your user files (not system files) and reset their ownership and access-control lists to the default. If you've set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it.
Step 1
If you have more than one user account, and the one in question is not an administrator account, then temporarily promote it to administrator status in the Users & Groups preference pane. To do that, unlock the preference pane using the credentials of an administrator, check the box marked Allow user to administer this computer, then reboot. You can demote the problem account back to standard status when this step has been completed.
Triple-click the following line to select it. Copy the selected text to the Clipboard (command-C):
{ sudo chflags -R nouchg,nouappnd ~ $TMPDIR.. ; sudo chown -Rh $UID:staff ~ $_ ; sudo chmod -R u+rwX ~ $_ ; chmod -R -N ~ $_ ; } 2> /dev/null
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V). You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The command will take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear, then quit Terminal.
Step 2 (optional)
The first step should give you usable permissions in your home folder. This step will restore special attributes set by OS X on some user folders to protect them from unintended deletion or renaming. You can skip this step if you don't consider that protection to be necessary.
Boot into Recovery by holding down the key combination command-R at startup. Release the keys when you see a gray screen with a spinning dial.
When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. A Terminal window will open.
In the Terminal window, type this:
resetpassword
That's one word, all lower case, with no spaces. Then press return. A Reset Password window will open. You’re not going to reset a password.
Select your boot volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select
▹ Restart
from the menu bar. -
I have an IPod 2nd generation I bought from a pawn shop. It worked for a day but now when I try to charge it, it keeps switching back and forth from the large full screen icon of a low battery and a lighting bolt below to the blue screen with the apple symbol in the middle. I had it on charge all night but still dead.
Try here.
iPod touch: Hardware troubleshooting
You may have a hardware problem. -
I have a problem with my iPhone 5 stopped working the sleep / power and simultaneously refused to obey the HOME button. I can not use either one or the other. I can not enable or disable the device, display lights up when you plug the charger. same display works fine as it is surprising. or maybe someone knows what is the reason for this? is there any way to solve this problem?
More than likely its a hardware issue, I have never encountered such a problem and best bet is to just go get it replaced. If you have insurance on your device apple will replace it as long as there was no water damage, if you dont have insurance they will charge $200 more or less. Hope you get it fixed
-
I have a big crossbar mark over my FF4 icon after I've installed and replaced FF3. When I try to open the software, I get "You can't open the application "Firefox" because it is not supported on this architecture." What's up with that?
Firefox 4 requires at least OS X 10.5 and an Intel Mac. There is a third party version of Firefox 4 that runs on OS X 10.4/10.5 and PPC Macs, for details see http://www.floodgap.com/software/tenfourfox
If you prefer, you can get the latest version of Firefox 3.6 from http://www.mozilla.com/en-US/firefox/all-older.html -
My Mac Mini was not sending a signal to the monitor. I powered down using the power button and now it will not start. When i power up I get a strange 2 tone sound, like a warning alarm. The fan starts, and the light comes on, but no screen.
I have tried with a wired USB keyboard and mouse using a single screen. Powered up with option pressed. No change.
Reset SMC no changeRun the Apple hardware test to see what it tells you. Run the extended test when prompted, which can take awhile.
-
Hi, my Macbook Pro isn't charging when I plug in my charger and the light on the charger thing isn't lighting up. How can I tell if the charger or the computer is broken? Also, is there a way to fix it? Thanks.
Not sure how I would tell if the contacts are stuck, but they look normal. The other stuff:
Battery Information:
Model Information:
Serial Number: W0046Q08UBX0A
Manufacturer: SMP
Device name: bq20z451
Pack Lot Code: 0000
PCB Lot Code: 0000
Firmware Version: 0201
Hardware Revision: 000a
Cell Revision: 0157
Charge Information:
Charge remaining (mAh): 3211
Fully charged: No
Charging: No
Full charge capacity (mAh): 5845
Health Information:
Cycle count: 943
Condition: Normal
Battery Installed: Yes
Amperage (mA): -1354
Voltage (mV): 11210
System Power Settings:
AC Power:
System Sleep Timer (Minutes): 10
Disk Sleep Timer (Minutes): 10
Display Sleep Timer (Minutes): 10
Wake On AC Change: No
Wake On Clamshell Open: Yes
Wake On LAN: Yes
Display Sleep Uses Dim: Yes
GPUSwitch: 2
Battery Power:
System Sleep Timer (Minutes): 10
Disk Sleep Timer (Minutes): 10
Display Sleep Timer (Minutes): 2
Wake On AC Change: No
Wake On Clamshell Open: Yes
Current Power Source: Yes
Display Sleep Uses Dim: Yes
GPUSwitch: 2
Reduce Brightness: Yes
Hardware Configuration:
UPS Installed: No
AC Charger Information:
Connected: No
Charging: No -
my itunes keeps telling me to contact support when i try to connect a visa card and will not let me buy music. any ideas why?
No one here can say specifically why. But you need to do what it says, contact iTunes Support. Click the Suppor tab above then the link under the Contact Us area and you'll be take to a page where you'll be guided appropriately.
Regards. -
lack of email app- makes this may purchase virtually useless. because
cant bridge with my bb 9700. maybe twice after deleting from both, and rebridging, i got connections. i cant spend an hour bridging every time. since may this is unfixable. the support people cant fix it after dozens of hours. got lots.of emails from them though. asking if i was resolved. when i answered no, they asked me to do it all again. they have no fix for this.
can type documents, but cant email them to anybody. same with excel. no way to attach documents when the bridge doesnt work.
i am a ceo,and i am moving my entire organization off bb becuase of this.
have spent many many hours from the beginning in may, and now they want me to pay a 129 dollar fee to get support when it has not worked right from the beginning.
i bought an ipad today and i am absolutely blown away by how much better it is in every single way. dozens of bbs are going away now.
slow, no.email, locks up all the time, stand by button restarts tablet, no bridging without total reload on both devices. why would i go through this anymore? it is costing my business a fortune with myself and my people trying to make the playbook work.
we will get ipads and make more money.
i have tried to stay loyal to bb, but after being told i have to pay for support
when i did once get a connection through bridge, reply locked up everytime on an email. could not type.I would like to add my support to this comment.
Strike 1) Bridging a BB 9700 with a PB is flaky at best. Even if you run the very latest software on both, it does not work properly. This is NOT a user issue but a programme/application issue. RIM software running on RIM hardware and O/S and NOT being able to connect properly = RIM fault.(see my other post: My Bridge connects, it exchanges data like passwords, number of unread emails and my playbook notifies me when someone calls my BB, but it does NOT unlock)
Strike 2) All this used to work fine during the 90d grace suport period (apart from the flaky bluetooth issue that required a hard reboot of the BB whenever the connection was broken in a bad way)
Strike 3) Now, after a PB OS upgrade (which I faithfully applied), several phone upgrades (due to another problem) and the latest Bridge application install, it all doesn't work anymore, 100 days after I bought the flipping thing. so I have a fancy ebook reader, not the productivity enhancing tool I can use on the go.
So now I am stuck with a forum that can't help, a technical database that does not contain this support information and a broken RIM application on RIM Hardware and O/S that I paid a lot of money for. And now they want more to look at this incident????? I am sorry but if this was a problem caused by usage, configuration or any other user error, I could understand it. But this is all completely in RIMs ballpark. I have done everything right. It connects. It just DOES NOT WORK!!!!!
As I said in my other post, an evaluation of the PB in my company is ongoing as a possible management tool by people I know quite well, as I work in the area, but my advice would definitely be to stay away until basic functionality like emails, attachments, calendars etcetera are all suitably solved and usable by the average manager with sausage fingers and no clue about bluetooth, hard reboots and who won't be able to hold down the power, + & - buttons at the same time as the fingers won't fit!!
So RIM, get your finger out, open up an email support channel or get some qualified support people go through this forum and help those people who have shown faith in your products and who now have real problems with your software and hardware. DONT HIDE BEHIND A STUPID SUPPORT FEE - MAN UP TO YOUR PROBLEMS!!! -
Keepgettimg accessory not supported when charging in romania. I have all the correct connections. ie wall converter, USB cord etc.
If you know the IP address of the printer, then you can check if there is a working path between the Mac and printer. This can be done using Network Utility or a web browser.
If you open Network Utility and select the Ping tab, you can enter the IP address of the Kodak and then press the Ping button. If there is a working connection then you should get a reply to each packet sent.
With the web browser, many devices have a built-in web server so you can type the IP address of the printer into the browser and if there is a working connection then you will open the printers web page.
So, are you able to confirm you have a working connection between the Mac and printer? -
Rest method that can support request/responce in both xml and json formats
Hi,
I want to create rest method that can support request/responce in both xml and json formats.
I am trying in bellow way, but its not working getting error.
any idea on this?
Code in IService.cs :
[OperationContract]
[WebGet(UriTemplate = "/Login/{UserID}/{Password}")]
Responce Login(string UserID, string Password);
Code in Service.cs :
public Responce Login(string UserID, string Password)
try
objResponce = new Responce();
objResponce.MessageType = Responce.ResponceType.Warning.ToString();
string Con = GetConnectionString(UserID, Password); //Method to check valid user or not
if (Con.Trim().Length != 0)
objResponce.Message = "you have logged in Successfully";
else
objResponce.Message = "Please Enter Valid UserID,Password";
catch (Exception ex)
through ex;
return objResponce;
My Config settings :
<services>
<service name="OnePointAPI.OnePointAPIService">
<endpoint address="JSON" binding="webHttpBinding" contract="OnePointAPI.IOnePointAPIService" behaviorConfiguration="webJSON" ></endpoint>
<endpoint address="XML" binding="basicHttpBinding" contract="OnePointAPI.IOnePointAPIService" behaviorConfiguration="webXML" ></endpoint>
</service>
</services>
<behaviors>
<serviceBehaviors>
<behavior>
<!-- To avoid disclosing metadata information, set the values below to false before deployment -->
<serviceMetadata httpGetEnabled="true" httpsGetEnabled="true"/>
<!-- To receive exception details in faults for debugging purposes, set the value below to true. Set to false before deployment to avoid disclosing exception information -->
<serviceDebug includeExceptionDetailInFaults="false"/>
</behavior>
</serviceBehaviors>
<endpointBehaviors>
<behavior name="webJSON">
<webHttp defaultOutgoingResponseFormat="Json"/>
</behavior>
<behavior name="webXML">
<webHttp defaultOutgoingResponseFormat="Xml" />
</behavior>
</endpointBehaviors>
</behaviors>
Anwar ShaikIn several days (in the 19th) i will lecture at
SQLSaturday #360 and my last demo (hopefully I will have the time) is
Full implementation of JSON, I will show several function using JSON serializer and deserializer, and as mentioned full implementation including fast
indexes on JSON column (finding specific Node in 10 million rows
in less then a second). If you want to wait, then I will publish it latter probably, or you can come the lecture if you want :-)
* I am using Json.NET framework, by the way.
regarding your question, all you need is to find a nice serializer/deserializer framework (you can use
Json.NET framework) in order to do what you are looking for (if I understand what you asked)
Ronen Ariely
[Personal Site] [Blog] [Facebook]
Maybe you are looking for
-
Regarding column editing in alv grid
hi experts, i m using alv grid display for my report layout what i want that after the output dispaly when the user will select my customized button "change the amount column" then after pressing this my amount column will become editable and user ca
-
it shows up but keeps saying that it cannot sync becasue the sync session times out >:( i really need it!
-
My iMac takes 15 minutes to start up
My iMac is taking 15 minutes to start up. I have tried starting in Safe Mode and it is still the same.
-
Latest update of itunes for windows 7
I see a lot of people are having problems with the latest updagte of itunes for windows 7. I installed the latest itunes update today and it failed twice. In fact it deleted itunes from the program files. I will wait a while to see what apple does ab
-
I am connecting 11g Analysis to an 11g Essbase cube. I have a filter setup to reference a repository variable which is populated from an Essbase Substitution variable. The substitution variable is set to: {Descendants([QTR3],10,leaves)} When I apply