OData Service Internal Server Error

Hello,
I developed SAP Netweaver Gateway Odata Service and I get "Internal Server Error" 500 on READ Operation. BAPI Itself does function well.
Where could be the problem?
Regards
Vladislav

Hi Vladislav,
You will get further information about the nature of the error by checking the error logs in the server(s), tcodes /iwbep/error_log and/or /iwfnd/error_log. If you have an embedded GW server, look in the /iwfnd logs.
You may find the list is blank until you use the 'Re-select' button and change the settings, so don't assume there are not errors to see!.
Make sure you have full trace access settings configured in views /IWFND/V_LOGV and /IWBEP/C_LOGV. These views are normally empty, there are two possible new entries that can be made and the possible values are on the F4 lists.
If this is a data translation error, you won't get a direct answer from the log but it can be used to pin down the nature of the exception.
If you can get this far, I can point you on to a technique for analysing the error during runtime - but it needs an error log result to be able to relate to.
Regards
Ron.

Similar Messages

Azure Cloud Service internal server error (500) while scaling up

I experienced multiple times that scaling up a Cloud Service from 1 (small) instance to 2 (small) instances causes a few minutes of downtime with request returning a an error 500. Is this how it's supposed to work?

Thanks for the reply!
Every initialization code is in OnStart() and in case of .cmd scripts, in <Startup> <Task>s inside the service definition... So I suppose until that is run to completion the Azure load balancer shouldn't dispatch any requests to the new instance.
I tested today everything again, this time with Windows Server 2012 R2 (the Cloud Service didn't use R2 before). The issue is the same:
Scaling up the service to two instance.
Second instance is being deployed and starts.
Requests going to the first instance work (i.e. since clients stick to their instance users who visited the site before the scale-up will continue to be serve through the first instance, hence not noticing anything). Requests going to the second instance
don't work (internal server error), but the main issue is that requests start to go to the second instance before it is fully initialized!
(I.e. Azure Management Portal says the role is starting, but still, I can manage to get my request to it, thus I suppose the load balancer does dispatch requests while the role is not fully started yet.)
Failed request tracing doesn't show anything related (it started to trace after the role got full initialized, but requests reached the instance before this). I can clearly see from the event logs that the ARR installation (run as a startup task) ended after
the first requests could reach it.
To summarize, when scaling up the following happens with the second, initializing instance:
The instance's state is correctly shown on the Management Portal and it's busy, starting.
The instance still gets requests before it gets fully started.
After the instance is fully started everything works normally.
Is this normal?

500 Internal Server Error invoking web service

I assembled and deployed a (PL/SQL package based) web service to OC4J 9.0.4 like documented in a number of FAQs and tutorials. All went well until I try to invoke a function: I already had to add jasper.zip to the WEB-INF\lib folder to resolve a ClassDefNotFound (and succeeded), but now I receive the following error:
With Mozilla and internet Explorer 6, requesting the address
http://localhost:8888/samplews/sampleWS?invoke=getproperty
results in the error
500 Internal Server Error
java.lang.NoClassDefFoundError: sun/tools/java/RuntimeConstants
at java.lang.ClassLoader.defineClass1(Native Method)
at java.lang.ClassLoader.defineClass(ClassLoader.java:620)
Ok, sun/tools/java/RuntimeConstants can be found in tools.jar (I use JDK 1.5.0_06, Oracle 10.1.0.3 and OC4J 9.0.4), so I copied %java_home%\lib\tools.jar to WEB-INF\lib of the deployed web application, restarted OC4J and verified using ProcessExplorer, which JARs and ZIPs had been loaded by "java -jar oc4j.jar". Among many others, I found all extension libraries, including the two I placed in WEB-INF\lib. But alas, still the Servlet Engine seems unable to resolve the package sun/tools/java/RuntimeConstants, despite tools.jar being obviously loaded by java.exe: the error decribed above persists.
%J2EE_HOME%\log\http-web-site.log contains
http://localhost:8888/samplews/sampleWS?invoke=getproperty HTTP/1.1" 500 3413
The other log files seem to contain no helpful info.
I'm at my wits end - what can I do? Do I miss something obvious?
Any comment or advice is welcome.

Hello,
This class is part of the JDK, so could you clarify which JDK you are using and be sure that when starting OC4J you are using a JDK environment (contains for example javac command) and not a JRE (no javac).
Could you check that and post the result in the forum.
Regards
Tugdual Grall

Internal Server error while configuring External service for CAF

Dear All,
While configuring the External Service (RFC) for CAF Core project in our EP7 SP11 server we are getting error message we are getting Internal server error when we click on service registry.
500   Internal Server Error
SAP NetWeaver Application Server 7.00/Java AS 7.00
Failed to process request. Please contact your system administrator.
[Hide]
Error Summary
While processing the current request, an exception occured which could not be handled by the application or the framework.
If the information contained on this page doesn't help you to find and correct the cause of the problem, please contact your system administrator. To facilitate analysis of the problem, keep a copy of this error page. Hint: Most browsers allow to select all content, copy it and then paste it into an empty document (e.g. email or simple text file).
Root Cause
The initial exception that caused the request to fail, was:
   java.lang.NullPointerException
    at com.sap.caf.mp.mmr.adapter.ServiceDefinitionTypeConverter.convertExternalInterface(ServiceDefinitionTypeConverter.java:507)
    at com.sap.caf.mp.mmr.adapter.MMServiceRetrievalAdapter.getExternalInterfaces(MMServiceRetrievalAdapter.java:547)
    at com.sap.caf.mp.mmr.ejb.MMServiceRetrievalAdapterCallerBean.getExternalInterfaces(MMServiceRetrievalAdapterCallerBean.java:158)
    at com.sap.caf.mp.mmr.ejb.MMServiceRetrievalAdapterCallerLocalLocalObjectImpl0_0.getExternalInterfaces(MMServiceRetrievalAdapterCallerLocalLocalObjectImpl0_0.java:477)
    at com.sap.caf.mp.core.data.service.DataServiceBridge.getExternalServices(DataServiceBridge.java:201)
    ... 47 more
Please let me know what shd be done to correct the error.
Warm Regards
Mazdul
[email protected]

The solution is mentioned in this thread:
Error on External Serrvice Configuration Page NW 20047s SP10
re-create your configuration if possible and see whether that fixes it

HTTP 403 Service Error, HTTP 500 Internal Server Error

My scenario is:
Rfc adapter --> XI --> WebService
I am get the following error(403,500) at the Call adapter. I like to know whether the following error occurs due to the timing out occuring as the client is not sending back a response? Any suggestions/help would be appreciated.
<SAP:TraceHeader xmlns:SAP="http://sap.com/exchange/MessageFormat">
<Trace level="0" type="System_Error">HTTP-client: error response= <SOAP:Envelope xmlns:SOAP='http://schemas.xmlsoap.org/soap/envelope/'><SOAP:Body><SOAP:Fault><faultcode>SOAP:Server</faultcode><faultstring>com.sap.aii.messaging.srt.BubbleException: Can't call the endpoint; Exception raised by com.sap.aii.messaging.net.TransportException: HTTP 403 Service Error</faultstring></SOAP:Fault></SOAP:Body></SOAP:Envelope></Trace>
<Trace level="1" type="System_Error">Exit XMB because of system error!</Trace>
<Trace level="0" type="System_Error">System-Error: HTTP.HTTP_STATUS_CODE_NEQ_OK</Trace>
<Trace level="0" type="System_Error">HTTP status code 500 : Internal Server Error</Trace>
<Trace level="0" type="System_Error">HTTP-client: error response= <SOAP:Envelope xmlns:SOAP='http://schemas.xmlsoap.org/soap/envelope/'><SOAP:Body><SOAP:Fault><faultcode>SOAP:Server</faultcode><faultstring>com.sap.aii.messaging.srt.BubbleException: Can't call the endpoint; Exception raised by com.sap.aii.messaging.net.TransportException: HTTP 403 Service Error</faultstring></SOAP:Fault></SOAP:Body></SOAP:Envelope></Trace>
<Trace level="1" type="System_Error">Exit XMB because of system error!</Trace>
<Trace level="0" type="System_Error">System-Error: HTTP.HTTP_STATUS_CODE_NEQ_OK</Trace>
<Trace level="0" type="System_Error">HTTP status code 500 : Internal Server Error</Trace>
<Trace level="1" type="System_Error">Exit XMB because of system error!</Trace>
<Trace level="0" type="System_Error">System-Error: HTTP.HTTP_STATUS_CODE_NEQ_OK</Trace>
<Trace level="0" type="System_Error">HTTP status code 500 : Internal Server Error</Trace>
</SAP:TraceHeader>

from SM59 I tested the connection of INTEGRATION_DIRECTORY_HMI(HTTP connection to ABAP system)
detail:
staus HTTP response 500
status text : internal server server
duration test call 17173 ms
Please help me out to resolve this issue

Sip 503 service unavailable and sip 500 internal server error

Hi guys,could any one help me in the following.
ITSP-->Voice gateway configured as CUBE-->CUCM-->UCCX
I am moving a system from cme and aa enviroment to cucm and uccx
The VGW is configured as CUBE and also is added as h323 gateway on cucm.
When i tested the debug ccsip messages shows
Sip 503 service unavailable or
sip 500 internal server error.
I can't now provide any debugs cause i am not on site,only on Saturday.
As i read in previous discussion that could be the bind source address problem but i had this configured.
Also i tried to configure the gateway instead of h232 to use sip trunk from cucm,but after this the incoming calls didn't even reach the router,the debug ccsip messages showed nothing.
For now can any one advice me to what these 2 errors related to.
What could be missing?
Thanks in advance.

Hi there : can some one explain the reason that i am getting this sip error with itsp:
here is the debug of ccsip messages:
Received:
INVITE sip:[email protected];user=phone SIP/2.0
Via: SIP/2.0/UDP 188.254.68.66:9298;branch=z9hG4bK-6110d60075a24c0f-a3c000c-1
Call-ID: isbc6994325518768294927-1385194135-11717
From: [email protected];user=phone>;tag=sbc09106994325518768294927
To:
CSeq: 1 INVITE
Min-SE: 90
Session-Expires: 3600;refresher=uac
Contact:
Allow: INVITE,CANCEL,BYE,ACK,REFER,UPDATE,INFO,PRACK
Supported: timer,100rel
Diversion: [email protected]>;privacy=off;screen=no;reason=unknown,[email protected]>;privacy=off;screen=no;reason=unknown
Max-Forwards: 70
User-Agent: VCS 5.8.2.56-03
Content-Length: 394
Content-Type: application/sdp
v=0
o=- 87852 198805 IN IP4 188.254.68.67
s=SBC call
c=IN IP4 188.254.68.67
t=0 0
m=audio 23682 RTP/AVP 8 0 18 98 96 97 101
a=rtpmap:98 G.729a/8000
a=rtpmap:96 G.729ab/8000
a=rtpmap:97 G.729b/8000
a=rtpmap:101 telephone-event/8000
a=fmtp:101 0-15
a=fmtp:18 annexb=no
a=ptime:10
a=X-vrzcap:vbd Ver=1 Mode=FaxPr ModemRtpRed=0
a=X-vrzcap:identification bin=DSR2866 Prot=mgcp App=MG
00:43:23: //11/FDB448CE8020/SIP/Msg/ccsipDisplayMsg:
Sent:
SIP/2.0 100 Trying
Via: SIP/2.0/UDP 188.254.68.66:9298;branch=z9hG4bK-6110d60075a24c0f-a3c000c-1
From: [email protected];user=phone>;tag=sbc09106994325518768294927
To:
Date: Sat, 23 Nov 2013 08:06:29 GMT
Call-ID: isbc6994325518768294927-1385194135-11717
CSeq: 1 INVITE
Allow-Events: telephone-event
Server: Cisco-SIPGateway/IOS-12.x
Content-Length: 0
00:43:23: //11/FDB448CE8020/SIP/Msg/ccsipDisplayMsg:
Sent:
SIP/2.0 503 Service Unavailable
Via: SIP/2.0/UDP 188.254.68.66:9298;branch=z9hG4bK-6110d60075a24c0f-a3c000c-1
From: [email protected];user=phone>;tag=sbc09106994325518768294927
To:
c2801#er=phone>;tag=27BA64-1DAE
Date: Sat, 23 Nov 2013 08:06:29 GMT
Call-ID: isbc6994325518768294927-1385194135-11717
CSeq: 1 INVITE
Allow-Events: telephone-event
Server: Cisco-SIPGateway/IOS-12.x
Reason: Q.850;cause=38
Content-Length: 0
00:43:23: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:
Received:
ACK sip:[email protected];user=phone SIP/2.0
Via: SIP/2.0/UDP 188.254.68.66:9298;branch=z9hG4bK-6110d60075a24c0f-a3c000c-1
Call-ID: isbc6994325518768294927-1385194135-11717
From: [email protected];user=phone>;tag=sbc09106994325518768294927
To: ;tag=27BA64-1DAE
CSeq: 1 ACK
Max-Forwards: 70
Content-Length: 0
show run:
voice service voip
ip address trusted list
ipv4 87.226.136.164 255.255.255.255
ipv4 172.16.24.0 255.255.255.0
ipv4 188.254.68.66 255.255.255.255
ipv4 188.254.68.67 255.255.255.255
ipv4 188.254.69.66 255.255.255.255
ipv4 188.254.69.67 255.255.255.255
ipv4 46.38.52.68 255.255.255.255
address-hiding
allow-connections h323 to h323
allow-connections h323 to sip
allow-connections sip to h323
allow-connections sip to sip
supplementary-service h450.12
no supplementary-service sip moved-temporarily
no supplementary-service sip refer
redirect ip2ip
fax protocol t38 version 0 ls-redundancy 0 hs-redundancy 0 fallback cisco
sip
voice class codec 1
codec preference 1 g729br8
codec preference 2 g729r8
codec preference 3 g711alaw
codec preference 4 g711ulaw
voice class codec 2
codec preference 1 g711ulaw
codec preference 2 g711alaw
codec preference 3 g729r8
codec preference 4 g729br8
voice translation-rule 1
rule 1 /XXX5397962/ /1999/
voice translation-rule 2
rule 1 /XXX55317577/ /1999/
voice translation-rule 3
rule 1 /5555317884/ /1999/
voice translation-profile ROS
translate called 1
voice translation-profile ROS2
translate called 2
voice translation-profile ROS3
translate called 3
interface FastEthernet0/0
ip address 178.208.129.221 255.255.255.248
ip access-group INBOUND in
no ip unreachables
ip verify unicast reverse-path
ip nat outside
ip inspect IPFW in
ip inspect IPFW out
ip virtual-reassembly in
duplex auto
speed auto
no cdp enable
interface FastEthernet0/1
no ip address
ip nat inside
ip virtual-reassembly in
duplex auto
speed auto
interface FastEthernet0/1.1
encapsulation dot1Q 1 native
ip address 10.110.0.200 255.255.255.0
ip nat inside
ip virtual-reassembly in
interface FastEthernet0/1.2
encapsulation dot1Q 2
ip address 172.16.24.254 255.255.255.0
ip nat inside
ip virtual-reassembly in
h323-gateway voip interface
h323-gateway voip bind srcaddr 172.16.24.254
ip dns server
ip nat inside source list NAT interface FastEthernet0/0 overload
ip route 0.0.0.0 0.0.0.0 178.208.X.X
ip route 192.168.0.0 255.255.0.0 Null0 254
sccp local FastEthernet0/1.2
sccp ccm 172.16.24.101 identifier 1 version 7.0
sccp
sccp ccm group 1
associate ccm 1 priority 1
associate profile 1 register XCODE123456
keepalive retries 1
keepalive timeout 10
switchover method immediate
switchback method immediate
dspfarm profile 1 transcode
codec g711ulaw
codec g711alaw
codec g729ar8
codec g729abr8
codec g729r8
codec g729br8
maximum sessions 6
associate application SCCP
dial-peer voice 10000 voip
tone ringback alert-no-PI
description ROSTELECOM Incoming
translation-profile incoming ROS
destination-pattern 74955397962
session protocol sipv2
session target ipv4:87.226.136.164
session transport udp
incoming called-number XXXX5397962
dtmf-relay rtp-nte
codec g711ulaw
dial-peer voice 10010 voip
tone ringback alert-no-PI
description ROSTELECOM Incoming
translation-profile incoming ROS2
destination-pattern XXX55317577
session protocol sipv2
session target ipv4:87.226.136.164
session transport udp
incoming called-number 75555317577
dtmf-relay rtp-nte
codec g711ulaw
dial-peer voice 10020 voip
tone ringback alert-no-PI
description ROSTELECOM Incoming
translation-profile incoming ROS3
preference 1
destination-pattern 5555317884
session protocol sipv2
session target ipv4:188.254.68.66
session transport udp
incoming called-number 5555317884
dtmf-relay rtp-nte
codec g711ulaw
dial-peer voice 10021 voip
tone ringback alert-no-PI
description ROSTELECOM Incoming
translation-profile incoming ROS
preference 2
destination-pattern 5555317884
session protocol sipv2
session target ipv4:188.254.69.66
session transport udp
incoming called-number 5555317884
dtmf-relay rtp-nte
codec g711ulaw
dial-peer voice 2 voip
tone ringback alert-no-PI
description to CUCM_PUB
destination-pattern 1...
session target ipv4:172.16.24.101
voice-class codec 2
dtmf-relay rtp-nte
I see in the debug that the itsp over g729 family codecs but not g711 at all
This system was working with this dialpeers before with same provider ,just i have added the dial-peer 2 .
I have changed the codec to match what is offered by itsp but no difference,still getting the same message.
PLZ help ASAP.

Error 500--Internal Server Error in Oracle SPARQL Service Endpoint

Hi,
I followed the instructions of "Setting Up the SPARQL Service" in the developer's guide. However, after I finished all the steps and click "Submit Query" button in Oracle SPARQL Service Endpoint using Joseki page, I got this error message:
Error 500--Internal Server Error
From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
10.5.1 500 Internal Server Error
The server encountered an unexpected condition which prevented it from fulfilling the request.
I can't figure out what's wrong with the service. Can anybody pls help me solve the problem? Thanks in advance.
Kind Regards,
Hong

hi zhe,
i installed the right version of jena adapter for oracle 11.2.01 and recreated the data source in WLS. however, i still got the same error when click joseki sparql service end point. but, the first error message is different than the second time. it is shown below:
first time:
Error 500--Internal Server Error
java.lang.NoSuchMethodError: com.hp.hpl.jena.sparql.util.StringUtils.join
(Ljava/lang/String;[Ljava/lang/String;)Ljava/lang/String;
     at org.joseki.Configuration.makeQuery(Configuration.java:827)
     at org.joseki.Configuration.readConfFile(Configuration.java:176)
     at org.joseki.Configuration.(Configuration.java:82)
     at org.joseki.Dispatcher.setConfiguration(Dispatcher.java:130)
     at org.joseki.Dispatcher.initServiceRegistry(Dispatcher.java:100)
     at org.joseki.http.Servlet.init(Servlet.java:112)
     at weblogic.servlet.internal.StubSecurityHelper$ServletInitAction.run
(StubSecurityHelper.java:283)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs
(AuthenticatedSubject.java:321)
     at weblogic.security.service.SecurityManager.runAs
(SecurityManager.java:121)
     at weblogic.servlet.internal.StubSecurityHelper.createServlet
(StubSecurityHelper.java:64)
     at weblogic.servlet.internal.StubLifecycleHelper.createOneInstance
(StubLifecycleHelper.java:58)
     at weblogic.servlet.internal.StubLifecycleHelper.
(StubLifecycleHelper.java:48)
     at weblogic.servlet.internal.ServletStubImpl.prepareServlet
(ServletStubImpl.java:539)
     at weblogic.servlet.internal.ServletStubImpl.execute
(ServletStubImpl.java:243)
     at weblogic.servlet.internal.ServletStubImpl.execute
(ServletStubImpl.java:183)
     at weblogic.servlet.internal.WebAppServletContext
$ServletInvocationAction.doIt(WebAppServletContext.java:3686)
     at weblogic.servlet.internal.WebAppServletContext
$ServletInvocationAction.run(WebAppServletContext.java:3650)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs
(AuthenticatedSubject.java:321)
     at weblogic.security.service.SecurityManager.runAs
(SecurityManager.java:121)
     at weblogic.servlet.internal.WebAppServletContext.securedExecute
(WebAppServletContext.java:2268)
     at weblogic.servlet.internal.WebAppServletContext.execute
(WebAppServletContext.java:2174)
     at weblogic.servlet.internal.ServletRequestImpl.run
(ServletRequestImpl.java:1446)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
thanks a lot.
regards,
hong

Web service control - Getting '500: Internal Server Error'

Hi ,
I am using a web service control to invoke a web service from a process.
The web service is deployed on remote host. I get followinf exception -
Submitted at Mon Aug 09 16:54:03 GMT+05:30 2004
External Service Failure: Response: '500: Internal Server Error' for
url:
'http://abc.test.com:8106/SecurityService/webservice/SecurityService.jws'
However, the service is deployed and running at "abc.test.com:8106".
when i invoke it thr' normal java client, it works.
Then why does the web service control dows not work?
Can anybody help???????

Hi,
I have gone through the docs. , not use full. Please find the inline comments for the same.
E-Business Suite Users Experience Intermittent HTTP-500 Errors and Database Connection Errors [ID 1314433.1] -- No solution
R12: Http Server Crashing Frequently With Segmentation Fault (NAS or SAN filesystem) [ID 732857.1] -- Already it is under local file system only.
How to resolve Broken Pipe errors in E-Business Suite R12 ? [ID 1480156.1] -- No solution
Autoconfig is completed wihtout any errors.
I have not chedked the database log file. I will check and update you soon.
Cheers,
Jagadeesha

Web-Ticket service returns: (500) Internal Server Error

I get Internal server errors when I try to get something from the server. This is what I get from the "Test-CSAddressBookService":
PS C:\Users\testuser> Test-CsAddressBookService -TargetFqdn wak-lync.testdomain.com -UserCredential testdomain\testuser -UserSipAddress "sip:[email protected]" -verbose
VERBOSE: Workflow Instance Id 42f8f454-5d02-48b2-8b8e-4ecaf6dba5e0, started.
Connecting to web service : https://wak-lync.testdomain.com:443/WebTicket/WebTicketService.svc
Using IWA authentication
Successfully created connection proxy and website bindings
Requesting new web ticket
Sending Web-Ticket Request: <s:Envelope xmlns:s="http://schemas.xmlsoap.org/soap/envelope/">
<s:Header>
<Action s:mustUnderstand="1" xmlns="http://schemas.microsoft.com/ws/2005/05/addressing/none">http://docs.oasis-open.org/ws-sx/ws-trust/200512/RST/Issue</Action>
</s:Header>
<s:Body>
<RequestSecurityToken xmlns="http://docs.oasis-open.org/ws-sx/ws-trust/200512">
<TokenType>http://docs.oasis-open.org/wss/oasis-wss-saml-token-profile-1.1#SAMLV1.1</TokenType>
<RequestType>http://schemas.xmlsoap.org/ws/2005/02/trust/Issue</RequestType>
<AppliesTo xmlns="http://schemas.xmlsoap.org/ws/2004/09/policy">
<EndpointReference xmlns="http://www.w3.org/2005/08/addressing">
<Address>https://wak-lync.testdomain.com/WebTicket/WebTicketService.svc</Address>
</EndpointReference>
</AppliesTo>
<Entropy>
<BinarySecret>BMLGyAK9H+6w1rrdFY+I2oSy39FMyfy86/WwJoTK0nE=</BinarySecret>
</Entropy>
<KeyType>http://docs.oasis-open.org/ws-sx/ws-trust/200512/SymmetricKey</KeyType>
</RequestSecurityToken>
</s:Body>
</s:Envelope>
ERROR communicating with GetWebTicket() service System.ServiceModel.ProtocolException: The content type text/html of the response message does not match the content type of the binding (text/xml; charset=utf-8). If using a custom encoder, be sure that the IsContentTypeSupported method is implemented properly. The first 1024 bytes of the response were:
'<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1"/>
<title>500 - Internal server error.</title>
<style type="text/css">

</style>
</head>
<body>
<div id="header"><h1>Server Error</h1></div>
<div id="content">
<div class="content-container"><fieldset>
'. ---> System.Net.WebException: The remote server returned an error: (500) Internal Server Error.
at System.Net.HttpWebRequest.GetResponse()
at System.ServiceModel.Channels.HttpChannelFactory.HttpRequestChannel.HttpChannelRequest.WaitForReply(TimeSpan timeout)
--- End of inner exception stack trace ---
Server stack trace:
at System.ServiceModel.Channels.HttpChannelUtilities.ValidateRequestReplyResponse(HttpWebRequest request, HttpWebResponse response, HttpChannelFactory factory, WebException responseException, ChannelBinding channelBinding)
at System.ServiceModel.Channels.HttpChannelFactory.HttpRequestChannel.HttpChannelRequest.WaitForReply(TimeSpan timeout)
at System.ServiceModel.Channels.RequestChannel.Request(Message message, TimeSpan timeout)
at System.ServiceModel.Dispatcher.RequestChannelBinder.Request(Message message, TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation)
at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message)
Exception rethrown at [0]:
at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
at Microsoft.Rtc.Internal.WebTicketService.IWebTicketService.IssueToken(Message request)
at Microsoft.Rtc.SyntheticTransactions.WebServicesHelper.GetWebTicket()
TargetUri : https://wak-lync.testdomain.com:443/abs/handler
TargetFqdn : wak-lync.testdomain.com
Result : Failure
Latency : 00:00:00
Error : ERROR - No response received for Web-Ticket service.
Inner Exception:The content type text/html of the response message
does not match the content type of the binding (text/xml; charset
=utf-8). If using a custom encoder, be sure that the IsContentType
Supported method is implemented properly. The first 1024 bytes of
the response were: '<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 S
trict//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=iso-88
59-1"/>
<title>500 - Internal server error.</title>
<style type="text/css">

</style>
</head>
<body>
<div id="header"><h1>Server Error</h1></div>
<div id="content">
<div class="content-container"><fieldset>
Inner Exception:The remote server returned an error: (500) Interna
l Server Error.
Diagnosis :
VERBOSE: 'Register' activity started.
Sending Registration request:
Target Fqdn = wak-lync.testdomain.com
User Sip Address = sip:[email protected]
Registrar Port = No Port is provided..
Auth Type 'IWA' is selected.
Registration Request hit against sip/WAK-LYNC.testdomain.com
'Register' activity completed in '0.3157031' secs.
'ReadUriFromInBandProvisioningDataActivity' activity started.
'ReadUriFromInBandProvisioningDataActivity' activity completed in '0.0002991' secs.
'UnRegisterActivity' activity started.
'UnRegisterActivity' activity completed in '0.0102002' secs.
'STActivity' activity started.
Trying to get web ticket.
Web Service url :
https://wak-lync.testdomain.com:443/WebTicket/WebTicketService.svc
Using NTLM\Kerb auth.
Could not get a web ticket
CHECK:
- Web service url is valid and the web services are functional
- If using PhoneNo\PIN to authenticate, make sure they match the user uri
- If using NTLM\Kerberos auth, make sure you provided valid credentials
An exception 'ERROR - No response received for Web-Ticket service.' occurred
during Workflow Microsoft.Rtc.SyntheticTransactions.Workflows.STAbsWorkflow
execution.
Exception Call Stack: at
Microsoft.Rtc.SyntheticTransactions.WebServicesHelper.GetWebTicket()
at
Microsoft.Rtc.SyntheticTransactions.Activities.GetWebTicketActivity.InternalExe
cute(ActivityExecutionContext executionContext)
at
Microsoft.Rtc.SyntheticTransactions.Activities.STActivity.Execute(ActivityExecu
tionContext executionContext)
at System.Workflow.ComponentModel.ActivityExecutor`1.Execute(T activity,
ActivityExecutionContext executionContext)
at System.Workflow.ComponentModel.CompositeActivityExecutor`1.Execute(T
activity, ActivityExecutionContext executionContext)
at System.Workflow.ComponentModel.ActivityExecutor`1.Execute(Activity
activity, ActivityExecutionContext executionContext)
at
System.Workflow.ComponentModel.ActivityExecutorOperation.Run(IWorkflowCoreRunti
me workflowCoreRuntime)
at System.Workflow.Runtime.Scheduler.Run()
Server stack trace:
at
System.ServiceModel.Channels.HttpChannelUtilities.ValidateRequestReplyResponse(
HttpWebRequest request, HttpWebResponse response, HttpChannelFactory factory,
WebException responseException, ChannelBinding channelBinding)
at
System.ServiceModel.Channels.HttpChannelFactory.HttpRequestChannel.HttpChannelR
equest.WaitForReply(TimeSpan timeout)
at System.ServiceModel.Channels.RequestChannel.Request(Message message,
TimeSpan timeout)
at System.ServiceModel.Dispatcher.RequestChannelBinder.Request(Message
message, TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean
oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan
timeout)
at
System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessa
ge methodCall, ProxyOperationRuntime operation)
at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage
message)
Exception rethrown at [0]:
at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage
reqMsg, IMessage retMsg)
at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData&
msgData, Int32 type)
at
Microsoft.Rtc.Internal.WebTicketService.IWebTicketService.IssueToken(Message
request)
at Microsoft.Rtc.SyntheticTransactions.WebServicesHelper.GetWebTicket()
VERBOSE: Workflow Instance Id 42f8f454-5d02-48b2-8b8e-4ecaf6dba5e0, completed.
VERBOSE: Workflow Execution Time (sec): 0.481
When I look at the server I see the following in the log:
2012-07-10 15:02:09 10.128.1.16 POST /WebTicket/WebTicketService.svc - 443 TESTDOMAIN\g01 10.10.20.115 OC/4.0.7577.4098+(Microsoft+Lync+2010) 500 0 0 218
2012-07-10 15:02:09 10.128.1.16 POST /groupexpansion/service.svc - 443 TESTDOMAIN\g01 10.10.20.115 OC/4.0.7577.4098+(Microsoft+Lync+2010) 500 0 0 0
2012-07-10 15:02:12 10.128.1.16 POST /WebTicket/WebTicketService.svc/cert - 443 TESTDOMAIN\e01 10.10.30.105 OC/4.0.7577.0+(Microsoft+Lync+2010) 500 0 0 15
2012-07-10 15:02:12 10.128.1.16 POST /WebTicket/WebTicketService.svc - 443 TESTDOMAIN\e01 10.10.30.105 OC/4.0.7577.0+(Microsoft+Lync+2010) 500 0 0 0
2012-07-10 15:02:15 10.128.1.16 POST /WebTicket/WebTicketService.svc - 443 TESTDOMAIN\k01 10.10.20.59 OC/4.0.7577.4098+(Microsoft+Lync+2010) 500 0 0 46
2012-07-10 15:02:15 10.128.1.16 POST /groupexpansion/service.svc - 443 TESTDOMAIN\k01 10.10.20.59 OC/4.0.7577.4098+(Microsoft+Lync+2010) 500 0 0 202
2012-07-10 15:02:18 10.128.1.16 POST /WebTicket/WebTicketService.svc - 443 TESTDOMAIN\g02 10.10.11.53 OC/4.0.7577.0+(Microsoft+Lync+2010) 500 0 0 31
2012-07-10 15:02:18 10.128.1.16 POST /groupexpansion/service.svc - 443 TESTDOMAIN\g02 10.10.11.53 OC/4.0.7577.0+(Microsoft+Lync+2010) 500 0 0 202
2012-07-10 15:02:18 10.128.1.16 POST /WebTicket/WebTicketService.svc - 443 TESTDOMAIN\k01 10.10.20.59 OC/4.0.7577.4098+(Microsoft+Lync+2010) 500 0 0 46
2012-07-10 15:02:18 10.128.1.16 POST /groupexpansion/service.svc - 443 TESTDOMAIN\k01 10.10.20.59 OC/4.0.7577.4098+(Microsoft+Lync+2010) 500 0 0 218
So I see it is not only a address book issue, though it is the first visible hint you get about it. I also get the Password request window for "Retrieving Response Groups" after the log in.
I looked at similar issues, but what I found was mainly Kerberos issues, but that is not the case here, the user is able to access the folders.

Hi,
Try the way the following thread mentioned:
http://social.technet.microsoft.com/Forums/en-US/ocsaddressbook/thread/83106a88-7b38-49cc-b62d-52867a99bfd1
Regards,
Lisa

500   Internal Server Error - Problem Opening Service Registry Page

Hi,
When i try open enterprise service page (http://localhost:50000/sr) i am getting following error,
"500   Internal Server Error" and "Failed to process request. Please contact your system administrator."
and the Java exception stack says,
com.sap.engine.services.webservices.espbase.client.bindings.exceptions.TransportBindingException: Invalid Response content type. Server returned code (500) with message <OK> and content type <text/html; charset=utf-8>.
    at com.sap.engine.services.webservices.espbase.client.bindings.impl.SOAPTransportBinding.handleSOAPResponseMessage(SOAPTransportBinding.java:471)
    at com.sap.engine.services.webservices.espbase.client.bindings.impl.SOAPTransportBinding.call_SOAP(SOAPTransportBinding.java:966)
    at com.sap.engine.services.webservices.espbase.client.bindings.impl.SOAPTransportBinding.callWOLogging(SOAPTransportBinding.java:703)
    at com.sap.engine.services.webservices.espbase.client.bindings.impl.SOAPTransportBinding.call(SOAPTransportBinding.java:673)
    at p1208540892498.UDDI_Inquiry_SoapBinding_Stub.find_tModel(UDDI_Inquiry_SoapBinding_Stub.java:125)
    ... 95 more
could any one please help me in finding out the problem. I am new to CE 7.1.
Thanks in advance.
Regards,
Prasad Babu.

Hi Eduardo,
as I work my way up through the landscape I have hit the same issue in our Regression PI system.
Do you have a solution ?
Thank you and kind regards,
Petr.

ASMX web service and The remote server returned an error: (500) Internal Server Error issue

i have developed a very small web service and which is hosted along with our web site. our webservice url is
http://www.bba-reman.com/Search/SearchDataIndex.asmx
web service code
namespace WebSearchIndex
#region SearchDataIndex
/// <summary>
/// SearchDataIndex is web service which will call function exist in another library for part data indexing
/// </summary>
[WebService(Namespace = "http://tempuri.org/")]
[WebServiceBinding(ConformsTo = WsiProfiles.BasicProfile1_1)]
[System.ComponentModel.ToolboxItem(false)]
// To allow this Web Service to be called from script, using ASP.NET AJAX, uncomment the following line.
// [System.Web.Script.Services.ScriptService]
public class SearchDataIndex : System.Web.Services.WebService
//public AuthHeader ServiceAuth=null;
public class AuthHeader : SoapHeader
public string Username;
public string Password;
#region StartIndex
/// <summary>
/// this function will invoke CreateIndex function of SiteSearch module to reindex the data
/// </summary>
[WebMethod]
public string StartIndex(AuthHeader auth)
string strRetVal = "";
if (auth.Username == "Admin" && auth.Password == "Admin")
strRetVal = SiteSearch.CreateIndex(false);
else
SoapException se = new SoapException("Failed : Invalid credentials",
SoapException.ClientFaultCode,Context.Request.Url.AbsoluteUri,new Exception("Invalid credentials"));
throw se;
return strRetVal;
#endregion
#endregion
when i was calling that web service from my win apps using
HttpWebRequest
class then getting error The remote server returned an error: (500) Internal Server Error
here is code of my win apps from where i am calling web service
string strXml = "";
strXml = "<s:Envelope xmlns:s='http://schemas.xmlsoap.org/soap/envelope/'><s:Body><StartIndex xmlns='http://tempuri.org/' xmlns:i='http://www.w3.org/2001/XMLSchema-instance'><auth><Username>joy</Username><Password>joy</Password></auth></StartIndex></s:Body></s:Envelope>";
string url = "http://www.bba-reman.com/Search/SearchDataIndex.asmx";
HttpWebRequest req = (HttpWebRequest)WebRequest.Create(url);
req.Method = "POST";
req.ContentType = "text/xml";
req.KeepAlive = false;
req.ContentLength = strXml.Length;
StreamWriter streamOut = new StreamWriter(req.GetRequestStream(), System.Text.Encoding.ASCII);
streamOut.Write(strXml);
streamOut.Close();
StreamReader streamIn = new StreamReader(req.GetResponse().GetResponseStream());
string strResponse = streamIn.ReadToEnd();
streamIn.Close();
i am just not being able to understand when this line execute
StreamReader streamIn = new StreamReader(req.GetResponse().GetResponseStream());
then getting the error The remote server returned an error: (500) Internal Server Error
not being able to understand where i made the mistake. mistake is in the code of web service end or in calling code?
help me to fix this issue. thanks

Hi Mou,
I just tried your win app code about calling web service, but failed. I got the 500 error after I called your service:
The error message I quoted from Fiddler:
<?xml version="1.0" encoding="utf-8"?><soap:Envelope xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema"><soap:Body><soap:Fault><faultcode>soap:Client</faultcode><faultstring>System.Web.Services.Protocols.SoapException: Failed : Invalid credentials ---> System.Exception: Invalid credentials
--- End of inner exception stack trace ---
at BBAReman.WebSearchIndex.SearchDataIndex.StartIndex(AuthHeader auth)</faultstring><faultactor>http://www.bba-reman.com/Search/SearchDataIndex.asmx</faultactor><detail /></soap:Fault></soap:Body></soap:Envelope>
I am not totally sure that error occurred by the authentication. But I suggest you can try to add this service into your project using this method below:
1.right click the Reference and select Add Service Reference
2.input your service link and click "Go"
And you can use this service as the following:
private async void callService()
ServiceReference1.SearchDataIndexSoapClient client =new ServiceReference1.SearchDataIndexSoapClient();
var Str= await client.StartIndexAsync(new ServiceReference1.AuthHeader { Username = "Admin", Password = "Admin" });
Please try it.
Regards,
Will
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Changed SP application pool service account - 500 internal server error

Hi all,
Trying to resolve some farm installation issues in our test environment. Long story short is that on install a previous user used our SP_Farm account to install everything and pretty much use this account to run all web applications/services.
So I am in the process of trying to resolve one portion of it by allocating a new managed account for the web application pools. I have created a new account called SP_Pool on the DC. This is just a domain user with no specific rights applied (classic authentication).
I changed the account using CA "configure service accounts" for both our mysite and SharePoint site web apps.
SP applied the new SP_Pool to the appropriate workstation groups and DB rights. Tried to hit the site and got the rather generic HTTP 500 Internal Server error. Put SP_Pool into the local admin rights group to test and was able to hit the site so something
is definitely pointing to a rights/permission issue. I was under the impression the app pool accounts did not require any local SP server rights? I have seen mention of "Impersonate a client after authentication" but that's only for Claims based
auth
I've gone through every scenario which are mentioned below:
Tried to connect from a client machine and server. 500 error
All App pools are started and SP_Pool is running both web apps
IIS bindings are same as before
no changes to the web.config
No errors in the Application event viewer
Checked iis logs and has 500 errors throughout it. The 4th number in the sequence usually changes (i.e. 500 0 0 499, 500 0 0 468 etc)
Turned on Failed Request Tracing and no issue has come up
Tried to clear the configuration cache - same deal
Ran process mon - seen nothing out of the ordinary
So based off the above is there anywhere else I could look to try and resolve this issue? Or is there something so damn obvious I've missed here? Running out of ideas
Appreciate any feedback
Thanks

Hello,
Have you tried to turn your SharePoint server off and on again ( I know , it sounds like a basic helpdesk answer but in the case of changing user account for application pool, it already fixed the issue for me)
Best regards, Christopher.
Blog |
Mail
Please remember to click "Mark As Answer" if a post solves your problem or
"Vote As Helpful" if it was useful.
Why mark as answer?

Internal Server Error (NullPointerException) when invoking a Web Service

I'm using SOA suite 10.1.3.3 (incl the latest patch set) on Windows XP.
I've created 3 web services using the wizard interface out of 3 existing WSDL files. The Java code inside the web services is just dummy code.
I'm testing the web services using the Test Web Service functionality in Oracle Enterprise Manager's Application Server Control.
The moment I fill in the data and press invoke, I get back the following fault:
<env:Body>
<env:Fault>
<faultcode>env:Server</faultcode>
<faultstring>Internal Server Error (Caught exception while handling request: java.lang.NullPointerException)</faultstring>
</env:Fault>
</env:Body>
I know that control never reaches inside the services themselves.
I've even followed the online demo that shows users how to create, deploy and test a Web Service in JDeveloper to make sure that I wasn't doing anything silly.
What could be wrong? Please help.
Thanks in advance.

Seems to be a problem in serialization??? What do I do?
When I invoke the web service from a web proxy client, this is the stack trace:
QueryGDSAsiaPackage.SearchAirline_fault: java.lang.NullPointerException
     at QueryGDSAsiaPackage.runtime.SearchAirline_fault__LiteralSerializer.doDeserialize(SearchAirline_fault__LiteralSerializer.java:71)
     at oracle.j2ee.ws.common.encoding.literal.LiteralObjectSerializerBase.internalDeserialize(LiteralObjectSerializerBase.java:250)
     at oracle.j2ee.ws.common.encoding.literal.LiteralObjectSerializerBase.deserialize(LiteralObjectSerializerBase.java:159)
     at QueryGDSAsiaPackage.runtime.QueryGDS_Asia_PortType_searchAirline_Fault_SOAPSerializer.deserializeDetail(QueryGDS_Asia_PortType_searchAirline_Fault_SOAPSerializer.java:56)
     at oracle.j2ee.ws.common.encoding.SOAPFaultInfoSerializer.doDeserializeSOAP11(SOAPFaultInfoSerializer.java:132)
     at oracle.j2ee.ws.common.encoding.SOAPFaultInfoSerializer.doDeserialize(SOAPFaultInfoSerializer.java:94)
     at oracle.j2ee.ws.common.encoding.ObjectSerializerBase.deserialize(ObjectSerializerBase.java:180)
     at oracle.j2ee.ws.common.encoding.ReferenceableSerializerImpl.deserialize(ReferenceableSerializerImpl.java:147)
     at oracleesb.QueryGDA_Asia_proxy.runtime.QueryGDS_AsiaSOAP_Stub._readBodyFaultElement(QueryGDS_AsiaSOAP_Stub.java:346)
     at oracle.j2ee.ws.client.StreamingSender._sendImpl(StreamingSender.java:321)
     at oracle.j2ee.ws.client.StreamingSender._send(StreamingSender.java:112)
     at oracleesb.QueryGDA_Asia_proxy.runtime.QueryGDS_AsiaSOAP_Stub.searchAirline(QueryGDS_AsiaSOAP_Stub.java:155)
     at QueryGDSAsiaPackage.QueryGDS_AsiaSOAPClient.searchAirline(QueryGDS_AsiaSOAPClient.java:43)
     at QueryGDSAsiaPackage.QueryGDS_AsiaSOAPClient.main(QueryGDS_AsiaSOAPClient.java:30)
Process exited with exit code 0.

Web Service Action block throws Internal Server Error 500

Please forgive the lengthy message!
Web service Action block authenticates the user as confirmed from the web service logs. Now I get an Internal Server Error 500. Is this a bug in MII? The WS does execute correctly from a .Net Client.
Here is the Message from the error in MII NetWeaver log:
SOAP Invoke Error. Status: 500 Message: Internal Server Error
[EXCEPTION]
java.lang.Exception: Status (500): Internal Server Error
at com.sap.lhcommon.webservice.SoapClient.invoke(SoapClient.java:81)
at com.sap.xmii.bls.executables.actions.webservice.WebServiceActions.callWebService(WebServiceActions.java:319)
at com.sap.xmii.bls.executables.actions.webservice.WebServiceActions.webService(WebServiceActions.java:408)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at com.sap.xmii.bls.engine.DataBufferPayload.execute(DataBufferPayload.java:157)
at com.sap.xmii.bls.engine.ReflectiveAction.doExecute(ReflectiveAction.java:629)
at com.sap.xmii.bls.engine.BaseNode.executeNode(BaseNode.java:195)
at com.sap.xmii.bls.engine.BaseAction.execute(BaseAction.java:75)
at com.sap.xmii.bls.engine.runners.ProductionRunner.runAction(ProductionRunner.java:121)
at com.sap.xmii.bls.executables.sequences.Sequence.execute(Sequence.java:50)
at com.sap.xmii.bls.engine.runners.ProductionRunner.runSequence(ProductionRunner.java:102)
at com.sap.xmii.bls.executables.sequences.Sequence.execute(Sequence.java:59)
at com.sap.xmii.bls.engine.runners.ProductionRunner.runSequence(ProductionRunner.java:102)
at com.sap.xmii.bls.executables.sequences.RootNode.execute(RootNode.java:39)
at com.sap.xmii.bls.engine.TransactionInstance.execute(TransactionInstance.java:879)
at com.sap.xmii.bls.engine.TransactionInstance.run(TransactionInstance.java:586)
at com.sap.xmii.bls.engine.TransactionExecuter.runTransactionInstance(TransactionExecuter.java:613)
at com.sap.xmii.bls.engine.TransactionExecuter.executeFromHttpRequest(TransactionExecuter.java:258)
at com.sap.xmii.servlet.Runner.service(Runner.java:81)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at com.sap.xmii.servlet.ServletRunner.run(ServletRunner.java:80)
at com.sap.xmii.common.LocalServiceConnection.post(LocalServiceConnection.java:137)
at com.sap.xmii.xacute.common.ClientCatalogUtilities.postServiceConnection(ClientCatalogUtilities.java:1946)
at com.sap.xmii.xacute.transaction.TransactionUtilities.ExecuteTransaction(TransactionUtilities.java:432)
at com.sap.xmii.servlet.Catalog.handleExecuteTempTrx(Catalog.java:254)
at com.sap.xmii.servlet.Catalog.service(Catalog.java:210)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at com.sap.engine.services.servlets_jsp.server.runtime.FilterChainImpl.runServlet(FilterChainImpl.java:162)
at com.sap.engine.services.servlets_jsp.server.runtime.FilterChainImpl.doFilter(FilterChainImpl.java:81)
at com.sap.xmii.system.SecurityFilter.doFilter(SecurityFilter.java:96)
at com.sap.engine.services.servlets_jsp.server.runtime.FilterChainImpl.doFilter(FilterChainImpl.java:73)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:441)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:291)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:396)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:385)
at com.sap.engine.services.servlets_jsp.filters.DSRWebContainerFilter.process(DSRWebContainerFilter.java:48)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
at com.sap.engine.services.servlets_jsp.filters.ServletSelector.process(ServletSelector.java:76)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
at com.sap.engine.services.servlets_jsp.filters.ApplicationSelector.process(ApplicationSelector.java:240)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
at com.sap.engine.services.httpserver.filters.WebContainerInvoker.process(WebContainerInvoker.java:78)
at com.sap.engine.services.httpserver.chain.HostFilter.process(HostFilter.java:9)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
at com.sap.engine.services.httpserver.filters.ResponseLogWriter.process(ResponseLogWriter.java:60)
at com.sap.engine.services.httpserver.chain.HostFilter.process(HostFilter.java:9)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
at com.sap.engine.services.httpserver.filters.DefineHostFilter.process(DefineHostFilter.java:27)
at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
at com.sap.engine.services.httpserver.filters.MonitoringFilter.process(MonitoringFilter.java:29)
at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
at com.sap.engine.services.httpserver.filters.MemoryStatisticFilter.process(MemoryStatisticFilter.java:43)
at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
at com.sap.engine.services.httpserver.filters.DSRHttpFilter.process(DSRHttpFilter.java:42)
at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
at com.sap.engine.services.httpserver.server.Processor.chainedRequest(Processor.java:425)
at com.sap.engine.services.httpserver.server.Processor$FCAProcessorThread.process(Processor.java:250)
at com.sap.engine.services.httpserver.server.rcm.RequestProcessorThread.run(RequestProcessorThread.java:45)
at com.sap.engine.core.thread.execution.Executable.run(Executable.java:109)
at com.sap.engine.core.thread.execution.CentralExecutor$SingleThread.run(CentralExecutor.java:314)
--Steve

Steve,
The 500 error is what we get back from the target server.
This is probably not a bug since I don't think that MII has ever supported the SOAP-Fault node to build the response XML.
Sam
PS: For those of you reading this we had an offline discussion about this.

Windows Azure Pack setup - 500 Internal Server Error - failed to configure databases and services

Hi,
I am trying to setup the Windows Azure pack to use the site to configure the Service bus 1.1 installation. When I try to configure the Windows Azure Pack I get the following error:
Admin Authentication Site
500 Internal Server Error - Failed to configure databases and services: Object reference not set to an instance of an object.
I'm not sure where the logs are to see what is causing this error. I have tried running as admin, running as a different user with no luck.
thanks,
Georgi
Georgi

Here's what I'm getting for this error:
Log Name: Microsoft-WindowsAzurePack-MgmtSvc-ConfigSite/Operational
Source: Microsoft-WindowsAzurePack-MgmtSvc-ConfigSite
Date: 3/27/2014 12:52:03 PM
Event ID: 103
Task Category: (65431)
Level: Error
Keywords: None
User: CLINICALSYSTEMS\Administrator
Computer: SERVER-PC.clinicalsystems.com
Description:
##### Application_Error: Exception=System.Web.HttpException (0x80004005): Failed to configure databases and services: Object reference not set to an instance of an object. ---> System.Management.Automation.CmdletInvocationException: Object reference not
set to an instance of an object. ---> System.NullReferenceException: Object reference not set to an instance of an object.
at Microsoft.WindowsAzure.Config.PowerShell.Configurer.CustomTokenServiceConfigurer.AddUserToGroup(GroupPrincipal group, UserPrincipal user)
at Microsoft.WindowsAzure.Config.PowerShell.Configurer.CustomTokenServiceConfigurer.ConfigureDefaultTrusts()
at Microsoft.WindowsAzure.Config.PowerShell.Configurer.CustomTokenServiceConfigurer.ConfigureClaimSecurity(Hashtable settings)
at Microsoft.WindowsAzure.Config.PowerShell.Configurer.CustomTokenServiceConfigurer.ConfigureCore(Hashtable settings)
at Microsoft.WindowsAzure.Config.PowerShell.Configurer.FeatureConfigurer.Configure(Hashtable settings)
at Microsoft.WindowsAzure.Server.PowerShell.Common.BaseCmdlet.ProcessRecord()
at System.Management.Automation.CommandProcessor.ProcessRecord()
--- End of inner exception stack trace ---
at System.Management.Automation.Runspaces.PipelineBase.Invoke(IEnumerable input)
at Microsoft.MgmtSvc.Config.Controllers.PowerShell.PSClient.RunCommand(Command command)
at Microsoft.MgmtSvc.Config.Controllers.PowerShell.ConfigurationPSClient.InitializeFeature(String name, Hashtable settings)
at Microsoft.MgmtSvc.Config.Controllers.ConfigurationController.<>c__DisplayClass3.<ConfigureFeature>b__0()
at System.Threading.Tasks.Task`1.InnerInvoke()
at System.Threading.Tasks.Task.Execute()
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at Microsoft.MgmtSvc.Config.Controllers.ConfigurationController.<ConfigureFeature>d__5.MoveNext()
at Microsoft.MgmtSvc.Config.Controllers.ConfigurationController.<ConfigureFeature>d__5.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at lambda_method(Closure , Task )
at System.Web.Mvc.Async.TaskAsyncActionDescriptor.EndExecute(IAsyncResult asyncResult)
at System.Web.Mvc.Async.AsyncControllerActionInvoker.<>c__DisplayClass3f.<BeginInvokeAsynchronousActionMethod>b__3e(IAsyncResult asyncResult)
at System.Web.Mvc.Async.AsyncControllerActionInvoker.<>c__DisplayClass37.<>c__DisplayClass39.<BeginInvokeActionMethodWithFilters>b__33()
at System.Web.Mvc.Async.AsyncControllerActionInvoker.<>c__DisplayClass4f.<InvokeActionMethodFilterAsynchronously>b__49()
at System.Web.Mvc.Async.AsyncControllerActionInvoker.<>c__DisplayClass37.<BeginInvokeActionMethodWithFilters>b__36(IAsyncResult asyncResult)
at System.Web.Mvc.Async.AsyncControllerActionInvoker.<>c__DisplayClass25.<>c__DisplayClass2a.<BeginInvokeAction>b__20()
at System.Web.Mvc.Async.AsyncControllerActionInvoker.<>c__DisplayClass25.<BeginInvokeAction>b__22(IAsyncResult asyncResult)
at System.Web.Mvc.Controller.<>c__DisplayClass1d.<BeginExecuteCore>b__18(IAsyncResult asyncResult)
at System.Web.Mvc.Async.AsyncResultWrapper.<>c__DisplayClass4.<MakeVoidDelegate>b__3(IAsyncResult ar)
at System.Web.Mvc.Controller.EndExecuteCore(IAsyncResult asyncResult)
at System.Web.Mvc.Async.AsyncResultWrapper.<>c__DisplayClass4.<MakeVoidDelegate>b__3(IAsyncResult ar)
at System.Web.Mvc.MvcHandler.<>c__DisplayClass8.<BeginProcessRequest>b__3(IAsyncResult asyncResult)
at System.Web.Mvc.Async.AsyncResultWrapper.<>c__DisplayClass4.<MakeVoidDelegate>b__3(IAsyncResult ar)
at System.Web.HttpApplication.CallHandlerExecutionStep.OnAsyncHandlerCompletion(IAsyncResult ar).
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-WindowsAzurePack-MgmtSvc-ConfigSite" Guid="{1F742CC8-BDAA-56B6-A4B8-49F946D19CD1}" />
<EventID>103</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>65431</Task>
<Opcode>0</Opcode>
<Keywords>0x0</Keywords>
<TimeCreated SystemTime="2014-03-27T16:52:03.223741300Z" />
<EventRecordID>111</EventRecordID>
<Correlation />
<Execution ProcessID="8068" ThreadID="7680" />
<Channel>Microsoft-WindowsAzurePack-MgmtSvc-ConfigSite/Operational</Channel>
<Computer>SERVER-PC.clinicalsystems.com</Computer>
<Security UserID="S-1-5-21-3021050346-1670805799-1320812125-500" />
</System>
<EventData>
<Data Name="exceptionInfo">System.Web.HttpException (0x80004005): Failed to configure databases and services: Object reference not set to an instance of an object. ---> System.Management.Automation.CmdletInvocationException: Object reference not set to an instance of an object. ---> System.NullReferenceException: Object reference not set to an instance of an object.
at Microsoft.WindowsAzure.Config.PowerShell.Configurer.CustomTokenServiceConfigurer.AddUserToGroup(GroupPrincipal group, UserPrincipal user)
at Microsoft.WindowsAzure.Config.PowerShell.Configurer.CustomTokenServiceConfigurer.ConfigureDefaultTrusts()
at Microsoft.WindowsAzure.Config.PowerShell.Configurer.CustomTokenServiceConfigurer.ConfigureClaimSecurity(Hashtable settings)
at Microsoft.WindowsAzure.Config.PowerShell.Configurer.CustomTokenServiceConfigurer.ConfigureCore(Hashtable settings)
at Microsoft.WindowsAzure.Config.PowerShell.Configurer.FeatureConfigurer.Configure(Hashtable settings)
at Microsoft.WindowsAzure.Server.PowerShell.Common.BaseCmdlet.ProcessRecord()
at System.Management.Automation.CommandProcessor.ProcessRecord()
--- End of inner exception stack trace ---
at System.Management.Automation.Runspaces.PipelineBase.Invoke(IEnumerable input)
at Microsoft.MgmtSvc.Config.Controllers.PowerShell.PSClient.RunCommand(Command command)
at Microsoft.MgmtSvc.Config.Controllers.PowerShell.ConfigurationPSClient.InitializeFeature(String name, Hashtable settings)
at Microsoft.MgmtSvc.Config.Controllers.ConfigurationController.<>c__DisplayClass3.<ConfigureFeature>b__0()
at System.Threading.Tasks.Task`1.InnerInvoke()
at System.Threading.Tasks.Task.Execute()
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at Microsoft.MgmtSvc.Config.Controllers.ConfigurationController.<ConfigureFeature>d__5.MoveNext()
at Microsoft.MgmtSvc.Config.Controllers.ConfigurationController.<ConfigureFeature>d__5.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at lambda_method(Closure , Task )
at System.Web.Mvc.Async.TaskAsyncActionDescriptor.EndExecute(IAsyncResult asyncResult)
at System.Web.Mvc.Async.AsyncControllerActionInvoker.<>c__DisplayClass3f.<BeginInvokeAsynchronousActionMethod>b__3e(IAsyncResult asyncResult)
at System.Web.Mvc.Async.AsyncControllerActionInvoker.<>c__DisplayClass37.<>c__DisplayClass39.<BeginInvokeActionMethodWithFilters>b__33()
at System.Web.Mvc.Async.AsyncControllerActionInvoker.<>c__DisplayClass4f.<InvokeActionMethodFilterAsynchronously>b__49()
at System.Web.Mvc.Async.AsyncControllerActionInvoker.<>c__DisplayClass37.<BeginInvokeActionMethodWithFilters>b__36(IAsyncResult asyncResult)
at System.Web.Mvc.Async.AsyncControllerActionInvoker.<>c__DisplayClass25.<>c__DisplayClass2a.<BeginInvokeAction>b__20()
at System.Web.Mvc.Async.AsyncControllerActionInvoker.<>c__DisplayClass25.<BeginInvokeAction>b__22(IAsyncResult asyncResult)
at System.Web.Mvc.Controller.<>c__DisplayClass1d.<BeginExecuteCore>b__18(IAsyncResult asyncResult)
at System.Web.Mvc.Async.AsyncResultWrapper.<>c__DisplayClass4.<MakeVoidDelegate>b__3(IAsyncResult ar)
at System.Web.Mvc.Controller.EndExecuteCore(IAsyncResult asyncResult)
at System.Web.Mvc.Async.AsyncResultWrapper.<>c__DisplayClass4.<MakeVoidDelegate>b__3(IAsyncResult ar)
at System.Web.Mvc.MvcHandler.<>c__DisplayClass8.<BeginProcessRequest>b__3(IAsyncResult asyncResult)
at System.Web.Mvc.Async.AsyncResultWrapper.<>c__DisplayClass4.<MakeVoidDelegate>b__3(IAsyncResult ar)
at System.Web.HttpApplication.CallHandlerExecutionStep.OnAsyncHandlerCompletion(IAsyncResult ar)</Data>
</EventData>
</Event>
Kori Francis Lead Software Developer Clinical Support Systems, Inc.

OData Service Internal Server Error

Similar Messages

Maybe you are looking for