ODBC configuration on Windows 7 Enterprise N

Dear Friends
I will be deploying Windows 7 client Enterprise N across the company.
I have to test ODBC connection on the machine with connection to an Access 2003 database or Access 2010 database (32-bit).
I am not able to connect..Any idea...
Regards
Kam.

Any idea?

Similar Messages

  • Oracle 9i ODBC Drivers on Windows 7 Enterprise 32 bit

    Hi,
    Can any one help me with the information, If the Oracle 9i ODBC drivers supported on Windows 7 Enterprise 32 bit, Access 2007 as the front end and Oracle 9i database as the backend.
    If the 9i drivers are not supported on Windows 7 Enterprise 32 bit which version is the supported version.
    Thanks
    Srini

    There is no driver for windows 7 (32-bit) to connect Oracle 9i (9.1) for .Net.
    .NET libraries for Oracle and OLE DB providers for Oracle both are available for higher version
    Oracle.dataaccess.client http://www.oracle.com/technetwork/database/windows/downloads/index-101290.html
    but check this below link
    http://www.oracle.com/technetwork/database/windows/downloads/index.html

  • Windows 7 Enterprise with Visual Studio 2008 and 32 bit ODBC access

    I have a 32 bit ODBC used to access Progress databases. We have to use the 32 bit driver.   My development had been run on XP in the past with no issues.  I have moved to a Windows 7 Enterprise workstation currently and cannot access
    through my app. The ODBC was installed as 32 bit through the SysWow64\odbcca32.exe with no issues.  I have tried to run my app with the x86 option but it still does not see the ODBC.  I went in and created a fake ODBC in the 64 bit interface
    and the app did see that ODBC so the app is running in 64 bit mode.  How can I force this app to run as 32 bit on my machine?  Thanks in advance. 

    Hi,
    Hello,
    Thank you for your post.
    I am afraid that the issue is out of support range of VS General Question forum which mainly discusses the usage issue of Visual Studio IDE such as
    WPF & SL designer, Visual Studio Guidance Automation Toolkit, Developer Documentation and Help System
    and Visual Studio Editor.
    For your issue how to force the app to run as 32bit, if you are working with Windows Forms app. please consult on Windows Forms Forum:http://social.msdn.microsoft.com/Forums/windows/en-US/home?category=windowsforms
    If you are working with WPF app, please consult on WPF forum:
    http://social.msdn.microsoft.com/Forums/vstudio/en-US/home?forum=wpf
    If you are working with ASP.NET Web Application, I suggest that you can consult your issue on ASP.NET forum:
    http://forums.asp.net/
     for better solution and support.
    If the app is a C++ win32 app, please consult on Visual C++ forum:
    http://social.msdn.microsoft.com/Forums/vstudio/en-US/home?forum=vcgeneral
    Best regards,
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Windows 7 Enterprise to Windows 8.1 upgrade consumer edition

    Hi,
    It might be a silly question but I'd like to know if it's possible to upgrade from a Windows 7 Enterprise computer to a Windows 8.1 consumer license. I mean the regular not the Pro edition.
    I am currently running  W7 Enterprise 64Bit and I bought an ESD version of Windows 8.1 and I went through the download process but once I try to move on to the installation it just wont run. It doesn't show any error but the installation setup just
    disappears.
    Any help would be appreciated.
    Thanks.
    Alex.

    if you really plan to use Windows 8.1 enterprise in future you can upgrade to Windows 8.1 enterprise preview
    http://www.microsoft.com/en-us/evalcenter/evaluate-windows-8-1-enterprise
    but rather than made a risk, I suggest you just download full ISO and installed it on separate drive and have dual boot OS configuration, for some cases you maybe not able to revert back to Windows 7 enterprise after the upgrade to Windows 8.1 enterprise
    preview. So make it safe and clean

  • CA and Certificate Issue in ACS 4.0 For Windows 2003 Enterprise Server

    Hi,
    I have configured Microsoft CA server on the same ACS 4.0 for Windows 2003 enterprise server which was configured earlier using the self generated certificates for EAP and PEAP authentications.
    After I change the certificate from self generated to the new CA certificate that can be viewed under install ACS certificate option on ACS server but having the following problems
    1. SSL is not functioning while internet browser access to the ACS server and going through http instead of https.
    2. Wireless clients are authenticated successfully even after the certificate is uninstalled.
    Any help on these problems will be appreciated.
    Thanks
    Best Regards,
    Ahmed

    Hi Rohit,
    Thanks for reminding the HTTPS option under Administration Control on ACS.
    I have some doubts pertaining to installation of certificates on Wireless clients though it is optional for Self Generated Certificates but what in case of Mirosoft CA as I tested wireless client authentications even after removing the certificate from microsoft supplicant WindowsXP SP2 having installed the patch KB885453 for PEAP. How the certificate on wireless client works.
    Is it mandatory or optional to keep certificate on Wireless Clients as they could able to get authenticated through ACS after removing the certificate.
    Thanks
    Best Regards,
    Ahmed

  • Can't create ODBC connection in Windows Server 2012R2

    I just finished installing the instant client & odbc connection on Windows Server 2008R2. I then attempted to perform the same installation on a new Windows Server 2012R2 instance and encountered the following issue.
    After extracting the contents of the 64bit instant client & odbc files into c:\oracle\instantclient_12_1, adding this to the path statement, and adding a TNS_ADMIN environmental variable, I successfully ran odbc_install.exe from an admin cmd window. I then opened the 64bit ODBC Data Source Administrator, clicked add, selected the Oracle in instantclient_12_1, and clicked finish. As soon as I did so, I received the following error: "The setup routines for the Oracle in instantclient_12_1 ODBC driver could not be loaded due to system error code 126: The specified module could not be found. (c:\oracle\instantclient_12_1\SQORAS32.dll)"
    I uninstalled the odbc client (odbc_uninstall.exe) and attempted again with the 32bit version & 32bit odbc configuration screen. I get the exact same result with 32bit as I do with 64bit.
    Any help would be appreciated.
    EDIT: Nevermind. Apparently I needed the Microsoft Visual C++ 2010 SP1 Redistributable Package for the correct DLLs

    Hi,
    I am running Netweaver 7 and ERP2005.
    J2EE support pack is 9. The sap note that you mentioned is for NW2004 and our system is running on NW2004s.
    Now I am trying to reconfigure the sld. In case if you can suggest me another solution, I will be very happy to try that out...
    Thanks for your reply
    Edited by: Rakesh Bothra on Apr 20, 2011 4:23 AM

  • Deinstall Oracle 11g client hangs on Windows 7 Enterprise 64-bit

    Hi,
    I am trying to dinstall Oracle 11g client on Windows 7 Enterprise 64-bit but the process hangs when it reaches the following:
    Removing Windows and .NET products configuration START
    It just hangs there for ever!
    Checking the log file C:\Program Files\Oracle\Inventory\logs\winprod_cleanup.out and I can see the last thing in there is ""Deconfiguring ODP.NET Component...""
    Any idea what could be the reason?
    Thanks,
    Firas
    Edited by: user10442582 on Apr 13, 2011 1:13 PM
    Edited by: user10442582 on Apr 13, 2011 1:15 PM
    Edited by: user10442582 on Apr 13, 2011 1:28 PM

    I was able to resolve it...Apparently I was logged on as administrator when I invoked deinstall which caused it to hang when it came to the part where it was getting ready to deinstall the .NET components...I logged off and loged in as myself and invoked the deinstall and it completed successfully...

  • Adobe Reader X and Windows 7 Enterprise Memory Leak

    Hi I am using Adobe Reader X with Windows 7 enterprise when reading a 8000 page document when I do a search I notice that the memory on my machine starts to creep up typically 1Mb per search this will continue to rise to over 300Mb as the document is used until it reaches a point that it freezes the machine, The only way to recover is Ctrl-Alt-Delete and cancel the task. Has this been observed by other users?

    Good day,
    Could you provide some additional details about both the file and your system's configuration?
    What version of Adobe Reader X do you have installed? (Help > About Adobe Reader)
    If you haven't updated to 10.0.3, please do so and see if the issue persists.
    How was the PDF file you're searching created?  (File > Document Properties > What does the PDF Producer line say?)
    Are you experiencing this with multiple files?
    Have you installed SP1 for Windows 7?
    Regards,
    David
    Acrobat Community Manager
    Adobe Systems

  • Another ODBC configuration issue?

    Hello all,
    I am trying to setup an ODBC datasouce based on Oracle XE databases.
    What I have done until now:
    1. Install Oracle XE 11G
    2. Install Oracle Client (http://www.oracle.com/technetwork/database/windows/downloads/index-101290.html)
    When I go in the ODBC administrator, I can only see a MS SQL server driver. No Oracle driver at all.
    I assume there are manual configurations to be done to get the Oracle driver in the ODBC administrator, but I do not know how to process.
    Could someone please help me?
    Thank you very much.
    Michel

    Pl do not post duplicates - Another ODBC configuration issue?

  • How Do I Convert Windows 10 Pro Technical Preview to Windows 10 Enterprise Technical Preview and Back Without Reinstalling Windows?

    Howdy,
    Much like in Windows 8 and Windows 8.1, Windows 10 provides you with experience that allows you to convert your Windows 10 Pro Technical Preview to Windows 10 Enterprise Technical Preview without having to reinstall Windows.
    Why would I need converting my Windows SKU (edition)
    Currently, you may need this to fix issues with Windows not synchronizing browser favorites between different editions. For example, if you're using Windows 10 Enterprise Technical Preview in a test environment at work and Windows 10 Pro Technical
    Preview at home, you won't see favorites added on Enterprise edition at home and vice versa. All the links added on Pro edition while browsing web at home won't appear on your work PC.
    To convert Windows 10 Pro Technical Preview to Windows 10
    Enterprise Technical Preview:
    1. Press WindowsKey+PauseBreak and select Add Windows Features at the bottom left corner of System window.
    2. In the Add features to <OSName> window click to add Product key and type in the
    public product key for Windows 10 Enterprise Technical Preview available here.
    Voila! Your Windows 10 Pro Technical Preview is now converted to Windows 10 Enterprise Technical Preview.
    To convert Windows 10 Enterprise Technical Preview to Windows 10 Pro Technical Preview:
    Following the above procedure does NOT reveal Add features to Windows 10 link button in System window.
    We could try doing this through DISM tool.
    1. Press WindowsKey+X and select Windows PowerShell (Admin) or Command Prompt (Admin).
    2. At the command prompt type dism /online /Get-CurrentEdition to obtain information about the current edition of Windows:
    PS C:\Windows\system32> dism /online /Get-CurrentEdition
    Deployment Image Servicing and Management tool
    Version: 10.0.9926.0
    Image Version: 10.0.9926.0
    Current edition is:
    Current Edition : Enterprise
    The operation completed successfully.
    PS C:\Windows\system32>
    3. Check which versions you may switch to:
    PS C:\Windows\system32> dism /online /Get-TargetEditions
    Deployment Image Servicing and Management tool
    Version: 10.0.9926.0
    Image Version: 10.0.9926.0
    Editions that can be upgraded to:
    (The current edition cannot be upgraded to any target editions.)
    The operation completed successfully.
    Looks like Windows 10 Enterprise Technical Preview cannot be downgraded.
    To downgrade edition from Enterprise to Pro, you can trick Windows setup into thinking it is running on Pro by going to HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion and changing the following keys:
    Windows Registry Editor Version 5.00
    [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion]
    "EditionID"="Enterprise"
    "ProductName"="Windows 10 Enterprise Technical Preview"
    I believe for Pro edition this must be
    Windows Registry Editor Version 5.00
    [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion]
    "EditionID"="Professional"
    "ProductName"="Windows 10 Pro Technical Preview"
    After that you may run in-place upgrade using Windows 10 Pro Technical Preview Setup disc.
    Note, if you can't find the Add features to option in Control panel, press Windows Key + R and type control /name Microsoft.WindowsAnytimeUpgrade.
    If you want to, you could change Windows edition via DISM servicing tool by running:
    DISM /online /Set-Edition:Enterprise /ProductKey:XXXXX-XXXXX-XXXXX-XXXXX-XXXXX /AcceptEula
    In case you can't access official page for
    Windows 10 Enterprise Technical Preview download, or the page that contains
    product key for Windows 10 Pro Technical Preview, you can always obtain the product key by looking for
    F:\sources\pid.txt on the Windows Setup disc.
    Well this is the world we live in And these are the hands we're given...

    Howdy,
    Much like in Windows 8 and Windows 8.1, Windows 10 provides you with experience that allows you to convert your Windows 10 Pro Technical Preview to Windows 10 Enterprise Technical Preview without having to reinstall Windows.
    Why would I need converting my Windows SKU (edition)
    Currently, you may need this to fix issues with Windows not synchronizing browser favorites between different editions. For example, if you're using Windows 10 Enterprise Technical Preview in a test environment at work and Windows 10 Pro Technical
    Preview at home, you won't see favorites added on Enterprise edition at home and vice versa. All the links added on Pro edition while browsing web at home won't appear on your work PC.
    To convert Windows 10 Pro Technical Preview to Windows 10
    Enterprise Technical Preview:
    1. Press WindowsKey+PauseBreak and select Add Windows Features at the bottom left corner of System window.
    2. In the Add features to <OSName> window click to add Product key and type in the
    public product key for Windows 10 Enterprise Technical Preview available here.
    Voila! Your Windows 10 Pro Technical Preview is now converted to Windows 10 Enterprise Technical Preview.
    To convert Windows 10 Enterprise Technical Preview to Windows 10 Pro Technical Preview:
    Following the above procedure does NOT reveal Add features to Windows 10 link button in System window.
    We could try doing this through DISM tool.
    1. Press WindowsKey+X and select Windows PowerShell (Admin) or Command Prompt (Admin).
    2. At the command prompt type dism /online /Get-CurrentEdition to obtain information about the current edition of Windows:
    PS C:\Windows\system32> dism /online /Get-CurrentEdition
    Deployment Image Servicing and Management tool
    Version: 10.0.9926.0
    Image Version: 10.0.9926.0
    Current edition is:
    Current Edition : Enterprise
    The operation completed successfully.
    PS C:\Windows\system32>
    3. Check which versions you may switch to:
    PS C:\Windows\system32> dism /online /Get-TargetEditions
    Deployment Image Servicing and Management tool
    Version: 10.0.9926.0
    Image Version: 10.0.9926.0
    Editions that can be upgraded to:
    (The current edition cannot be upgraded to any target editions.)
    The operation completed successfully.
    Looks like Windows 10 Enterprise Technical Preview cannot be downgraded.
    To downgrade edition from Enterprise to Pro, you can trick Windows setup into thinking it is running on Pro by going to HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion and changing the following keys:
    Windows Registry Editor Version 5.00
    [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion]
    "EditionID"="Enterprise"
    "ProductName"="Windows 10 Enterprise Technical Preview"
    I believe for Pro edition this must be
    Windows Registry Editor Version 5.00
    [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion]
    "EditionID"="Professional"
    "ProductName"="Windows 10 Pro Technical Preview"
    After that you may run in-place upgrade using Windows 10 Pro Technical Preview Setup disc.
    Note, if you can't find the Add features to option in Control panel, press Windows Key + R and type control /name Microsoft.WindowsAnytimeUpgrade.
    If you want to, you could change Windows edition via DISM servicing tool by running:
    DISM /online /Set-Edition:Enterprise /ProductKey:XXXXX-XXXXX-XXXXX-XXXXX-XXXXX /AcceptEula
    In case you can't access official page for
    Windows 10 Enterprise Technical Preview download, or the page that contains
    product key for Windows 10 Pro Technical Preview, you can always obtain the product key by looking for
    F:\sources\pid.txt on the Windows Setup disc.
    Well this is the world we live in And these are the hands we're given...

  • Installing OVI Suit on Windows Vista Enterprise di...

    Hy,
    I have a great problem with the OVI suit installation on a Windows Vista Enterprise 32Bit.
    Before i install ovi suit, there was the "Nokia PC Suit" on the PC this software is uninstalled now, and also i run the “Nokia_PC_Suite_Cleaner_7_1_1.exe“.
    Also i have browsed the Support Board and Google/Bing for solutions,
    But nothing of these entries can help me with this installation.
    OVI Suit version is actually downloaded yesterday (3.0.0.290).
    The installation stops at 1/3 of the normal run.
    I have tested the installation on 3 machines like the problem PC, without a problem.
    So i have no idea what i can do to run the installation to the end.
     Now I have started a new try to install the OVI Suit, and deleted before all Registry-Keys.
    By the way, is this really normal that the installation needs more than 120MB RAM?
    So it’s 16:30 at your site next business day is Monday, i hope you have all details and can help me.
    Greats from Austria
    Attachments:
    snipp.JPG ‏31 KB
    snipp2.JPG ‏24 KB

    Client Certifications
    OS Product Server Status Addtl. Info. Components Other Issues
    Vista SP1 12.0 N/A Certified None None Yes None
    Vista 12.0 N/A Certified None None Yes NoneIt is certified as a Client (Desktop) only. Means, you can access Oracle Apps 11i/R12 from a machine running Windows Vista, but it is not certified as Application/Database tiers.
    And also the below link from blogs.oracle.com says that R12 is certified with vista.
    http://blogs.oracle.com/stevenChan/2008/07/windows_vista_service_pack_1_certified_with_apps_1.html
    Release 12
    - Oracle Applications Release 12 with R12.ATG_PF.A.DELTA.3 (patch 6077669) or later
    - Microsoft Vista Service Pack 1 (SP1) desktop clients running Internet Explorer 7
    - Sun Java plug-in (JRE) 1.5.0_12 or later

  • ITunes v11.1 has stopped working on Windows 7 Enterprise 64bit

    Hi to all. I have brand new Dell's Latitude E6540 laptop with Windows 7 Enterprise edition 64bit. I downloaded the newest iTunes v11.1 and installed (Run as Administrator) it on my new laptop. After I start iTunes in less then minute the small windows pops-up saying "iTunes has stopped working. Here is copy of error:
    Problem signature:
      Problem Event Name:    APPCRASH
      Application Name:    iTunes.exe
      Application Version:    11.1.0.126
      Application Timestamp:    52394b24
      Fault Module Name:    KERNELBASE.dll
      Fault Module Version:    6.1.7601.18229
      Fault Module Timestamp:    51fb1116
      Exception Code:    c06d007e
      Exception Offset:    0000c41f
      OS Version:    6.1.7601.2.1.0.256.4
      Locale ID:    1033
      Additional Information 1:    0a9e
      Additional Information 2:    0a9e372d3b4ad19135b953a78882e789
      Additional Information 3:    0a9e
      Additional Information 4:    0a9e372d3b4ad19135b953a78882e789
    Read our privacy statement online:
      http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409
    If the online privacy statement is not available, please read our privacy statement offline:
      C:\Windows\system32\en-US\erofflps.txt
    So, what is the fix for that Itunes problem? Thanks for help. vpanov

    Try copying the QTMovieWin.dll in the  c:\program files (x86)\common files\apple\apple application support folder to the c:\program files (x86)\iTunes folder. I had same problem and it's fixed this bug.

  • Driver for the ethernet controller on a HP Pavillion P600000 Series desktop after upgrading to Windows 7 Enterprise?

    After upgrading from Windows 7 Home Premium to Windows 7 Enterprise (x64) Service Pack 1 (build 7601), I cannot find working drivers for my ethernet controller. The desktop is a HP Pavillion, Model
    No. p6710f. I located the drivers on HP's website, but Windows 7 Enterprise
    is not listed as compatible. Compatibility list:
    Microsoft Windows 7 Home Basic (64-bit), Microsoft Windows 7 Home Premium (64-bit), Microsoft Windows 7 Professional (64-bit), Microsoft Windows 7 Ultimate (64-bit), Microsoft Windows 7 (64-bit)
    The original driver (according to HP's site) is a Realtek PCIe Family networking controller, Version:7.26.902.2010 Rev. A.
    I tried contacting HP, but apparently I voided their warranty once I upgraded to Windows 7 Enterprise. I do not have a support plan with Microsoft because the operating system was purchase through TechSoup (nonprofit). I greatly appreciate your help;
    let me know if you need more information.

    On Fri, 15 Jul 2011 21:36:53 +0000, microsoft_questions wrote:
    After upgrading from Windows 7 Home Premium to Windows 7 Enterprise (x64) Service Pack 1 (build 7601), I cannot find working drivers for my ethernet controller. The desktop is a HP Pavillion, Model No. p6710f. I located the drivers on HP's website <http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=pv-89905-1&cc=us&dlc=en&lc=en&os=4063&product=5049513&sw_lang=>,
    but Windows 7 Enterprise is not listed as compatible. Compatibility list:
    Microsoft Windows 7 Home Basic (64-bit), Microsoft Windows 7 Home Premium (64-bit), Microsoft Windows 7 Professional (64-bit), 
    Microsoft Windows 7 Ultimate (64-bit), Microsoft Windows 7 (64-bit)
    Windows 7 Ultimate and Enterprise are essentially the same with regard
    to their software. Only the license is different. So if it's
    compatible with Ultimate, it's also compatible with Enterprise.
    Ken Blake, Microsoft MVP

  • Windows 2008 Enterprise 32-bit Random Blue Screen 0x000000C4

    Hello,
    We have a customer with IBM x3500 M3 server, Windows 2008 Enterprise SP2 32-bit, 24GB RAM (Domain, file and print server, rdp server roles installed).
    Since December 2013, they have been experiencing random reboots (once or twice a month), so I ran debug on the memory.dmp and found that ntkrpamp.exe wa scausing this issue:
    Debug on memory.dmp file for January, 2014:
    Microsoft (R) Windows Debugger Version 6.12.0002.633 X86
    Copyright (c) Microsoft Corporation. All rights reserved.
    Loading Dump File [C:\Debug\MEMORY.DMP]
    Kernel Summary Dump File: Only kernel address space is available
    Symbol search path is: srv*c:\symbols*http://msdl.microsoft.com/download/symbols
    Executable search path is: C:\Win2008E.DVD
    Windows Server 2008/Windows Vista Kernel Version 6002 (Service Pack 2) MP (12 procs) Free x86 compatible
    Product: LanManNt, suite: Enterprise TerminalServer
    Built by: 6002.18881.x86fre.vistasp2_gdr.130707-1535
    Machine Name:
    Kernel base = 0x82233000 PsLoadedModuleList = 0x8234ac70
    Debug session time: Wed Jan  8 08:24:19.852 2014 (UTC - 5:00)
    System Uptime: 4 days 0:37:56.528
    Loading Kernel Symbols
    Loading User Symbols
    Loading unloaded module list
    *                        Bugcheck Analysis                                   
    Use !analyze -v to get detailed debugging information.
    BugCheck 50, {f85c5048, 0, 823af2bf, 0}
    Probably caused by : ntkrpamp.exe ( nt!CmpCheckKey+61b )
    Followup: MachineOwner
    9: kd> !analyze -v
    *                        Bugcheck Analysis                                   
    PAGE_FAULT_IN_NONPAGED_AREA (50)
    Invalid system memory was referenced.  This cannot be protected by try-except,
    it must be protected by a Probe.  Typically the address is just plain bad or it
    is pointing at freed memory.
    Arguments:
    Arg1: f85c5048, memory referenced.
    Arg2: 00000000, value 0 = read operation, 1 = write operation.
    Arg3: 823af2bf, If non-zero, the instruction address which referenced the bad memory
        address.
    Arg4: 00000000, (reserved)
    Debugging Details:
    READ_ADDRESS:  f85c5048
    FAULTING_IP:
    nt!CmpCheckKey+61b
    823af2bf 394724          cmp     dword ptr [edi+24h],eax
    MM_INTERNAL_CODE:  0
    DEFAULT_BUCKET_ID:  VISTA_DRIVER_FAULT
    BUGCHECK_STR:  0x50
    PROCESS_NAME:  System
    CURRENT_IRQL:  0
    TRAP_FRAME:  97b7d9ec -- (.trap 0xffffffff97b7d9ec)
    ErrCode = 00000000
    eax=00000000 ebx=e6b30024 ecx=19ef8172 edx=00000035 esi=a559e6a8 edi=f85c5024
    eip=823af2bf esp=97b7da60 ebp=97b7da8c iopl=0         nv up ei pl zr na pe nc
    cs=0008  ss=0010  ds=0023  es=0023  fs=0030  gs=0000             efl=00010246
    nt!CmpCheckKey+0x61b:
    823af2bf 394724          cmp     dword ptr [edi+24h],eax ds:0023:f85c5048=????????
    Resetting default scope
    LAST_CONTROL_TRANSFER:  from 82280de4 to 822cb292
    STACK_TEXT:  
    97b7d9d4 82280de4 00000000 f85c5048 00000000 nt!MmAccessFault+0x10b
    97b7d9d4 823af2bf 00000000 f85c5048 00000000 nt!KiTrap0E+0xdc
    97b7da8c 823b581a 01000001 009c4020 009c3f70 nt!CmpCheckKey+0x61b
    97b7dabc 823b5e48 a559e6a8 01000001 00000006 nt!CmpCheckRegistry2+0x8c
    97b7db04 823b086e 01000001 97b7dc60 8000a05c nt!CmCheckRegistry+0xf5
    97b7db60 823b2fdd 97b7dbb4 00000005 00000000 nt!CmpInitializeHive+0x4c1
    97b7dbd8 823b527d 97b7dc60 00000000 97b7dc4c nt!CmpInitHiveFromFile+0x19e
    97b7dc18 823ab4c5 97b7dc60 00000000 97b7dc7b nt!CmpCmdHiveOpen+0x36
    97b7dd14 823ab6fa 00000002 8232b5a0 00000002 nt!CmpFlushBackupHive+0x2fd
    97b7dd38 8248acbd 8233513c 8e9462d8 822d8d4a nt!CmpSyncBackupHives+0x90
    97b7dd44 822d8d4a 00000000 00000000 8e9462d8 nt!CmpPeriodicBackupFlushWorker+0x32
    97b7dd7c 8240901c 00000000 8e585cb2 00000000 nt!ExpWorkerThread+0xfd
    97b7ddc0 82271eee 822d8c4d 00000001 00000000 nt!PspSystemThreadStartup+0x9d
    00000000 00000000 00000000 00000000 00000000 nt!KiThreadStartup+0x16
    STACK_COMMAND:  kb
    FOLLOWUP_IP:
    nt!CmpCheckKey+61b
    823af2bf 394724          cmp     dword ptr [edi+24h],eax
    SYMBOL_STACK_INDEX:  2
    SYMBOL_NAME:  nt!CmpCheckKey+61b
    FOLLOWUP_NAME:  MachineOwner
    MODULE_NAME: nt
    IMAGE_NAME:  ntkrpamp.exe
    DEBUG_FLR_IMAGE_TIMESTAMP:  51da1840
    FAILURE_BUCKET_ID:  0x50_nt!CmpCheckKey+61b
    BUCKET_ID:  0x50_nt!CmpCheckKey+61b
    Followup: MachineOwner
    Based on google searches, driver verifier was recommended to be turned on to track driver with fault. I enabled verifier on all drivers, disabled automatic server reboot and today server crashed again.
    here's the debug output of full memory.dmp file:
    Microsoft (R) Windows Debugger Version 6.12.0002.633 X86
    Copyright (c) Microsoft Corporation. All rights reserved.
    Loading Dump File [C:\windows\memory.dmp]
    Kernel Summary Dump File: Only kernel address space is available
    Symbol search path is: srv*c:\symbols*http://msdl.microsoft.com/download/symbols
    Executable search path is: C:\Win2008E.DVD
    Windows Server 2008/Windows Vista Kernel Version 6002 (Service Pack 2) MP (12 procs) Free x86 compatible
    Product: LanManNt, suite: Enterprise TerminalServer
    Built by: 6002.18881.x86fre.vistasp2_gdr.130707-1535
    Machine Name:
    Kernel base = 0x82214000 PsLoadedModuleList = 0x8232bc70
    Debug session time: Thu Feb 13 08:29:07.272 2014 (UTC - 5:00)
    System Uptime: 3 days 23:15:45.259
    Loading Kernel Symbols
    Loading User Symbols
    PEB is paged out (Peb.Ldr = 7ffdd00c).  Type ".hh dbgerr001" for details
    Loading unloaded module list
    *                        Bugcheck Analysis                                   
    Use !analyze -v to get detailed debugging information.
    BugCheck C4, {e2, af033d18, 2d0000, 0}
    Page 6684ef not present in the dump file. Type ".hh dbgerr004" for details
    Page 66a0f9 not present in the dump file. Type ".hh dbgerr004" for details
    Probably caused by : srvnet.sys ( srvnet!SrvNetWskSendData+c9 )
    Followup: MachineOwner
    9: kd> !analyze -v
    *                        Bugcheck Analysis                                   
    DRIVER_VERIFIER_DETECTED_VIOLATION (c4)
    A device driver attempting to corrupt the system has been caught.  This is
    because the driver was specified in the registry as being suspect (by the
    administrator) and the kernel has enabled substantial checking of this driver.
    If the driver attempts to corrupt the system, bugchecks 0xC4, 0xC1 and 0xA will
    be among the most commonly seen crashes.
    Arguments:
    Arg1: 000000e2, IRP field is a user-mode address but Irp->RequestorMode is KernelMode.
    Arg2: af033d18, IRP address.
    Arg3: 002d0000, User-mode address present as the value of an IRP field.
    Arg4: 00000000
    Debugging Details:
    Page 6684ef not present in the dump file. Type ".hh dbgerr004" for details
    Page 66a0f9 not present in the dump file. Type ".hh dbgerr004" for details
    BUGCHECK_STR:  0xc4_e2
    DEFAULT_BUCKET_ID:  VISTA_DRIVER_FAULT
    PROCESS_NAME:  spoolsv.exe
    CURRENT_IRQL:  2
    LAST_CONTROL_TRANSFER:  from 824ff5a7 to 822e19bd
    STACK_TEXT:  
    eff67a20 824ff5a7 000000c4 000000e2 af033d18 nt!KeBugCheckEx+0x1e
    eff67a40 824fea32 af033d18 002d0000 9930e2e0 nt!VerifierBugCheckIfAppropriate+0x32
    eff67a58 824fe7e0 af033d18 9930e2e0 99269b80 nt!ViIrpCheckKernelAddressForIrp+0x51
    eff67a70 824f766d 99269b80 af033458 99269b80 nt!VfBeforeCallDriver+0x3d
    eff67a90 82258931 af033fa4 af033fe0 99269b80 nt!IovCallDriver+0x1ef
    eff67aa4 9b01271a eff67adc aad3183f bd99d34c nt!IofCallDriver+0x1b
    eff67aac aad3183f bd99d34c eff67ad0 00000002 afd!WskProAPISend+0x67
    eff67adc aad31490 9b01d9d0 af033d18 af033458 srvnet!SrvNetWskSendData+0xc9
    eff67afc aad779d2 d5b93018 af033458 00000030 srvnet!SrvNetSendData+0x4d
    eff67b14 aadb45bd af033368 aad75459 af033d18 srv!SrvStartSend2+0xa3
    eff67b40 aad7522d af033fa4 eff67b84 824f7d4d srv!SrvFsdRestartReadAndX+0x127
    eff67b4c 824f7d4d 00000000 af033d18 af033368 srv!SrvFsdIoCompletionRoutine+0x1d
    eff67b84 822bb0fb 00000000 af033d18 eff67bf0 nt!IovpLocalCompletionRoutine+0x16e
    eff67bb8 824f7b95 824f7a77 ccb4e7c8 eff67c44 nt!IopfCompleteRequest+0x11d
    eff67c28 981a30d9 c3fbc2d8 ccb4e7c8 909c9dd0 nt!IovCompleteRequest+0x11c
    eff67c4c 824f76be 909c9dd0 ccb4e7c8 9efe80e8 Npfs!NpFsdWrite+0x53
    eff67c70 82258931 ccb4e838 ccb4e7c8 909c9dd0 nt!IovCallDriver+0x23f
    eff67c84 8245ae25 9efe8114 ccb4e7c8 ccb4e838 nt!IofCallDriver+0x1b
    eff67ca4 82427b13 909c9dd0 9efe80e8 00000001 nt!IopSynchronousServiceTail+0x1d9
    eff67d38 8225ec96 909c9dd0 00000a39 00000000 nt!NtWriteFile+0x6fc
    eff67d38 77755d14 909c9dd0 00000a39 00000000 nt!KiSystemServicePostCall
    WARNING: Frame IP not in any known module. Following frames may be wrong.
    0549f880 00000000 00000000 00000000 00000000 0x77755d14
    STACK_COMMAND:  kb
    FOLLOWUP_IP:
    srvnet!SrvNetWskSendData+c9
    aad3183f 53              push    ebx
    SYMBOL_STACK_INDEX:  7
    SYMBOL_NAME:  srvnet!SrvNetWskSendData+c9
    FOLLOWUP_NAME:  MachineOwner
    MODULE_NAME: srvnet
    IMAGE_NAME:  srvnet.sys
    DEBUG_FLR_IMAGE_TIMESTAMP:  4dbabc34
    FAILURE_BUCKET_ID:  0xc4_e2_VRF_srvnet!SrvNetWskSendData+c9
    BUCKET_ID:  0xc4_e2_VRF_srvnet!SrvNetWskSendData+c9
    Followup: MachineOwner
    Here's the output of mini dump file as well:
    Microsoft (R) Windows Debugger Version 6.12.0002.633 X86
    Copyright (c) Microsoft Corporation. All rights reserved.
    Loading Dump File [C:\windows\minidump\Mini021314-01.dmp]
    Mini Kernel Dump File: Only registers and stack trace are available
    Symbol search path is: srv*c:\symbols*http://msdl.microsoft.com/download/symbols
    Executable search path is: C:\Win2008E.DVD
    Windows Server 2008/Windows Vista Kernel Version 6002 (Service Pack 2) MP (12 procs) Free x86 compatible
    Product: LanManNt, suite: Enterprise TerminalServer
    Built by: 6002.18881.x86fre.vistasp2_gdr.130707-1535
    Machine Name:
    Kernel base = 0x82214000 PsLoadedModuleList = 0x8232bc70
    Debug session time: Thu Feb 13 08:29:07.272 2014 (UTC - 5:00)
    System Uptime: 3 days 23:15:45.259
    Loading Kernel Symbols
    Press ctrl-c (cdb, kd, ntsd) or ctrl-break (windbg) to abort symbol loads that take too long.
    Run !sym noisy before .reload to track down problems loading symbols.
    Loading User Symbols
    Loading unloaded module list
    *                        Bugcheck Analysis                                   
    Use !analyze -v to get detailed debugging information.
    BugCheck C4, {e2, af033d18, 2d0000, 0}
    Probably caused by : srvnet.sys ( srvnet!SrvNetWskSendData+c9 )
    Followup: MachineOwner
    9: kd> !analyze -v
    *                        Bugcheck Analysis                                   
    DRIVER_VERIFIER_DETECTED_VIOLATION (c4)
    A device driver attempting to corrupt the system has been caught.  This is
    because the driver was specified in the registry as being suspect (by the
    administrator) and the kernel has enabled substantial checking of this driver.
    If the driver attempts to corrupt the system, bugchecks 0xC4, 0xC1 and 0xA will
    be among the most commonly seen crashes.
    Arguments:
    Arg1: 000000e2, IRP field is a user-mode address but Irp->RequestorMode is KernelMode.
    Arg2: af033d18, IRP address.
    Arg3: 002d0000, User-mode address present as the value of an IRP field.
    Arg4: 00000000
    Debugging Details:
    BUGCHECK_STR:  0xc4_e2
    CUSTOMER_CRASH_COUNT:  1
    DEFAULT_BUCKET_ID:  VERIFIER_ENABLED_VISTA_MINIDUMP
    PROCESS_NAME:  spoolsv.exe
    CURRENT_IRQL:  2
    LAST_CONTROL_TRANSFER:  from 824ff5a7 to 822e19bd
    STACK_TEXT:  
    eff67a20 824ff5a7 000000c4 000000e2 af033d18 nt!KeBugCheckEx+0x1e
    eff67a40 824fea32 af033d18 002d0000 9930e2e0 nt!VerifierBugCheckIfAppropriate+0x32
    eff67a58 824fe7e0 af033d18 9930e2e0 99269b80 nt!ViIrpCheckKernelAddressForIrp+0x51
    eff67a70 824f766d 99269b80 af033458 99269b80 nt!VfBeforeCallDriver+0x3d
    eff67a90 82258931 af033fa4 af033fe0 99269b80 nt!IovCallDriver+0x1ef
    eff67aa4 9b01271a eff67adc aad3183f bd99d34c nt!IofCallDriver+0x1b
    eff67aac aad3183f bd99d34c eff67ad0 00000002 afd!WskProAPISend+0x67
    eff67adc aad31490 9b01d9d0 af033d18 af033458 srvnet!SrvNetWskSendData+0xc9
    eff67afc aad779d2 d5b93018 af033458 00000030 srvnet!SrvNetSendData+0x4d
    eff67b14 aadb45bd af033368 aad75459 af033d18 srv!SrvStartSend2+0xa3
    eff67b40 aad7522d af033fa4 eff67b84 824f7d4d srv!SrvFsdRestartReadAndX+0x127
    eff67b4c 824f7d4d 00000000 af033d18 af033368 srv!SrvFsdIoCompletionRoutine+0x1d
    eff67b84 822bb0fb 00000000 af033d18 eff67bf0 nt!IovpLocalCompletionRoutine+0x16e
    eff67bb8 824f7b95 824f7a77 ccb4e7c8 eff67c44 nt!IopfCompleteRequest+0x11d
    eff67c28 981a30d9 c3fbc2d8 ccb4e7c8 909c9dd0 nt!IovCompleteRequest+0x11c
    eff67c4c 824f76be 909c9dd0 ccb4e7c8 9efe80e8 Npfs!NpFsdWrite+0x53
    eff67c70 82258931 ccb4e838 ccb4e7c8 909c9dd0 nt!IovCallDriver+0x23f
    eff67c84 8245ae25 9efe8114 ccb4e7c8 ccb4e838 nt!IofCallDriver+0x1b
    eff67ca4 82427b13 909c9dd0 9efe80e8 00000001 nt!IopSynchronousServiceTail+0x1d9
    eff67d38 8225ec96 909c9dd0 00000a39 00000000 nt!NtWriteFile+0x6fc
    eff67d38 77755d14 909c9dd0 00000a39 00000000 nt!KiSystemServicePostCall
    WARNING: Frame IP not in any known module. Following frames may be wrong.
    0549f880 00000000 00000000 00000000 00000000 0x77755d14
    STACK_COMMAND:  kb
    FOLLOWUP_IP:
    srvnet!SrvNetWskSendData+c9
    aad3183f 53              push    ebx
    SYMBOL_STACK_INDEX:  7
    SYMBOL_NAME:  srvnet!SrvNetWskSendData+c9
    FOLLOWUP_NAME:  MachineOwner
    MODULE_NAME: srvnet
    IMAGE_NAME:  srvnet.sys
    DEBUG_FLR_IMAGE_TIMESTAMP:  4dbabc34
    FAILURE_BUCKET_ID:  0xc4_e2_VRF_srvnet!SrvNetWskSendData+c9
    BUCKET_ID:  0xc4_e2_VRF_srvnet!SrvNetWskSendData+c9
    Followup: MachineOwner
    I'd like to know how to fix this. Server has up-to-date firmware and drivers from IBM. It's also up-to-date on all windows updates.
    Any help is greatly appreciated.
    Will

    This one may help.
    http://msdn.microsoft.com/en-us/library/windows/hardware/ff559023(v=vs.85).aspx
    I'd test the RAM and or get with IBM on best method to verify the hardware and drivers.
    Regards, Dave Patrick ....
    Microsoft Certified Professional
    Microsoft MVP [Windows]
    Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

  • Error while Installing R12.1.1 on Windows 2003 Enterprise Edition

    Dear All,
    I am installing R12.1.1 on Windows 2003 Enterprise Edition Server. I am using the media source that i have downloaded from Oracle Edelivery. I have done a MD5Sum check on the dowloaded files based the MD5SUM Check details given in site. (Not after staging).
    I have the stage files in the same partition as the partition in which the OS & Oracle is being installed (Free space is 300GB after staging)
    When the Installation reaches 53%, the installation fails with the following Error: "RW-50004: Error code received when running external process. Check log file for details. Running APPL_TOP Install Driver for VIS Instance"
    Log File:
    =====================
    e:\oracle\VIS\inst\apps\VIS_r12\logs\03021433.log
    ================================
    Processing Step 3 of 5
    Executing: e:\oracle\VIS\inst\apps\VIS_r12\temp\adrunias.cmd
    D:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>REM Perform the registration for tech stack
    D:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>echo Statusstring Registering Applications Technology Stack
    Statusstring Registering Applications Technology Stack
    D:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>(echo APPS & echo APPS ) | D:\StageR12\startCD\Disk1\rapidwiz\jre\NT\1.6.0\bin\java -mx512M -classpath .;D:\StageR12\startCD\Disk1\rapidwiz\jlib\java;D:\StageR12\startCD\Disk1\rapidwiz\jlib\xmlparserv2.jar;D:\StageR12\startCD\Disk1\rapidwiz\jlib\ojdbc14.jar;D:\StageR12\startCD\Disk1\rapidwiz\jlib\oui\OraInstaller.jar;D:\StageR12\startCD\Disk1\rapidwiz\jlib\oui\ewt3.jar;D:\StageR12\startCD\Disk1\rapidwiz\jlib\oui\share.jar;D:\StageR12\startCD\Disk1\rapidwiz\jlib\oui\srvm.jar oracle.apps.ad.clone.ApplyAppsTechStack -e e:\oracle\VIS\inst\apps\VIS_r12\appl\admin\VIS_r12.xml -stage D:\StageR12\startCD\Disk1\rapidwiz -showProgress -phase reg -nopromptmsg
    Log file located at e:\oracle\VIS\inst\apps\VIS_r12\admin\log\ApplyAppsTechStack_03021625.log
    **** truncated *************
    - 3% completed
    \ 3% completed RC-50004: Fatal: Error occurred in ApplyAppsTechStack:
    RC-50013: Fatal: Failed to instantiate driver e:\oracle\VIS\apps\tech_st\10.1.3\appsutil\driver\regclone.drv
    D:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>if 1 == 0 goto :REG_OK
    D:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>echo Cannot execute registration of Applications Techstack
    Cannot execute registration of Applications Techstack
    D:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>if "" == "TRUE" goto :INSIAS_OK RW-50010: Error: - script has returned an error: 1
    RW-50004: Error code received when running external process. Check log file for details.
    Running APPL_TOP Install Driver for VIS instance
    ApplyAppsTechStack_03021625.log
    =========================
    Started ApplyAppsTechStack at Wed Mar 02 16:25:21 IST 2011
    Version:
         ApplyAppsTechStack.java     :      120.23
    Executing home registration for s_weboh_oh...
    Registering using Registration Driver
    e:\oracle\VIS\apps\tech_st\10.1.3\appsutil\driver\regclone.drv
    instantiate file:
    source : e:\oracle\VIS\apps\tech_st\10.1.3\appsutil\template\adouiweboh.pl
    dest : e:\oracle\VIS\apps\tech_st\10.1.3\appsutil\clone\ouicli.pl
    backup : e:\oracle\VIS\apps\tech_st\10.1.3\appsutil\clone\ouicli.pl to e:\oracle\VIS\inst\apps\VIS_r12\out\ouicli.pl
    setting permissions: 700
    instantiate file:
    source : e:\oracle\VIS\apps\tech_st\10.1.3\appsutil\template\txkstubcfg1013.pl
    dest : e:\oracle\VIS\apps\tech_st\10.1.3\appsutil\clone\txkstubcfg1013.pl
    backup : e:\oracle\VIS\apps\tech_st\10.1.3\appsutil\clone\txkstubcfg1013.pl to e:\oracle\VIS\inst\apps\VIS_r12\out\txkstubcfg1013.pl
    setting permissions: 700
    instantiate file:
    source : e:\oracle\VIS\apps\tech_st\10.1.3\appsutil\template\apachectl_sh_1013_oh.tmp
    dest : e:\oracle\VIS\apps\tech_st\10.1.3\Apache\Apache\bin\apachectl
    backup : e:\oracle\VIS\apps\tech_st\10.1.3\Apache\Apache\bin\apachectl to e:\oracle\VIS\inst\apps\VIS_r12\out\apachectl
    setting permissions: 700
    Executing script in InstantiateFile:
    e:\oracle\VIS\apps\tech_st\10.1.3\perl\5.8.3\bin\MSWin32-x86-multi-thread\perl.exe -I e:\oracle\VIS\apps\tech_st\10.1.3\perl\5.8.3\lib\MSWin32-x86-multi-thread -I e:\oracle\VIS\apps\tech_st\10.1.3\perl\5.8.3\lib -I e:\oracle\VIS\apps\tech_st\10.1.3\perl\site\5.8.3\lib\MSWin32-x86-multi-thread -I e:\oracle\VIS\apps\tech_st\10.1.3\perl\site\5.8.3\lib -I e:\oracle\VIS\apps\apps_st\appl\au\12.0.0\perl -I e:\oracle\VIS\apps\tech_st\10.1.3\Apache\Apache\mod_perl\site\5.8.3\lib\MSWin32-x86-multi-thread e:\oracle\VIS\apps\tech_st\10.1.3\appsutil\clone\ouicli.pl
    script returned:
    Timed out( 3750000 ): Interrupted Exception
    Beginning OUI CLI cloning for s_weboh_ohWed Mar 2 16:25:24 2011
    e:\oracle\VIS\apps\tech_st\10.1.3\appsutil\jdk\jre\bin\java.exe -classpath D:\StageR12\startCD\Disk1\rapidwiz\jlib\java;e:\oracle\VIS\apps\tech_st\10.1.3\oui\jlib\OraInstaller.jar;D:\StageR12\startCD\Disk1\rapidwiz\jlib\xmlparserv2.jar;D:\StageR12\startCD\Disk1\rapidwiz\jlib\ojdbc14.jar oracle.apps.ad.clone.util.OracleHomeCloner -OUICLI -e e:\oracle\VIS\inst\apps\VIS_r12\appl\admin\VIS_r12.xml -nolink -oaVar s_weboh_oh -homestub weboh -log e:\oracle\VIS\inst\apps\VIS_r12\admin\log\ohclone.log
    running OUI CLI home cloning:
    e:\oracle\VIS\apps\tech_st\10.1.3\oui\bin\setup.exe -nowait -clone -silent -force -nolink -waitForCompletion session:ORACLE_HOME=e:\oracle\VIS\apps\tech_st\10.1.3 oracle.as.j2ee.top:s_asInstanceName=VIS_r12_WEBOH oracle.as.j2ee.top:s_adminName=oc4jadmin oracle.as.j2ee.top:s_adminPassword=welcome ORACLE_HOME_NAME=VIS_r12_WEBOH -J-Doracle.installer.noLink=true
    Executing script in InstantiateFile:
    e:\oracle\VIS\apps\tech_st\10.1.3\perl\5.8.3\bin\MSWin32-x86-multi-thread\perl.exe -I e:\oracle\VIS\apps\tech_st\10.1.3\perl\5.8.3\lib\MSWin32-x86-multi-thread -I e:\oracle\VIS\apps\tech_st\10.1.3\perl\5.8.3\lib -I e:\oracle\VIS\apps\tech_st\10.1.3\perl\site\5.8.3\lib\MSWin32-x86-multi-thread -I e:\oracle\VIS\apps\tech_st\10.1.3\perl\site\5.8.3\lib -I e:\oracle\VIS\apps\apps_st\appl\au\12.0.0\perl -I e:\oracle\VIS\apps\tech_st\10.1.3\Apache\Apache\mod_perl\site\5.8.3\lib\MSWin32-x86-multi-thread e:\oracle\VIS\apps\tech_st\10.1.3\appsutil\clone\txkstubcfg1013.pl
    script returned:
    .end std out.
    .end err out.
    instantiate file:
    source : e:\oracle\VIS\apps\tech_st\10.1.3\appsutil\template\adouiweboh.pl
    dest : e:\oracle\VIS\apps\tech_st\10.1.3\appsutil\clone\ouicli.pl
    backup : e:\oracle\VIS\apps\tech_st\10.1.3\appsutil\clone\ouicli.pl to e:\oracle\VIS\inst\apps\VIS_r12\out\ouicli0.pl
    setting permissions: 700
    instantiate file:
    source : e:\oracle\VIS\apps\tech_st\10.1.3\appsutil\template\txkstubcfg1013.pl
    dest : e:\oracle\VIS\apps\tech_st\10.1.3\appsutil\clone\txkstubcfg1013.pl
    backup : e:\oracle\VIS\apps\tech_st\10.1.3\appsutil\clone\txkstubcfg1013.pl to e:\oracle\VIS\inst\apps\VIS_r12\out\txkstubcfg10130.pl
    setting permissions: 700
    instantiate file:
    source : e:\oracle\VIS\apps\tech_st\10.1.3\appsutil\template\apachectl_sh_1013_oh.tmp
    dest : e:\oracle\VIS\apps\tech_st\10.1.3\Apache\Apache\bin\apachectl
    backup : e:\oracle\VIS\apps\tech_st\10.1.3\Apache\Apache\bin\apachectl to e:\oracle\VIS\inst\apps\VIS_r12\out\apachectl0
    setting permissions: 700
    e:\oracle\VIS\inst\apps\VIS_r12\admin\log\adcvmlog.xml does not exist. Ignore it
    [AutoConfig Error Report]
    The following report lists errors AutoConfig encountered during each
    phase of its execution. Errors are grouped by directory and phase.
    The report format is:
    <filename> <phase> <return code where appropriate>
    [APPLY PHASE]
    AutoConfig could not successfully execute the following scripts:
    Directory: e:\oracle\VIS\apps\tech_st\10.1.3\perl\5.8.3\bin\MSWin32-x86-multi-thread\perl.exe -I e:\oracle\VIS\apps\tech_st\10.1.3\perl\5.8.3\lib\MSWin32-x86-multi-thread -I e:\oracle\VIS\apps\tech_st\10.1.3\perl\5.8.3\lib -I e:\oracle\VIS\apps\tech_st\10.1.3\perl\site\5.8.3\lib\MSWin32-x86-multi-thread -I e:\oracle\VIS\apps\tech_st\10.1.3\perl\site\5.8.3\lib -I e:\oracle\VIS\apps\apps_st\appl\au\12.0.0\perl -I e:\oracle\VIS\apps\tech_st\10.1.3\Apache\Apache\mod_perl\site\5.8.3\lib\MSWin32-x86-multi-thread e:\oracle\VIS\apps\tech_st\10.1.3\appsutil\clone
    ouicli.pl INSTE8_APPLY -1
    AutoConfig is exiting with status 1
    RC-50013: Fatal: Instantiate driver did not complete successfully.
    e:\oracle\VIS\apps\tech_st\10.1.3\appsutil\driver\regclone.drv
    I have gone through the meta link document [989752.1]. But I feel that document does not apply to me as i am not running the installation from a network storage area.
    Pl. help me.
    Thanks and regards,
    Adm.

    AN Update:
    The Oracle Universal Installer shows the following in the screen before the error appears:
    Starting Oracle Universal Installer...
    No pre-requisite checks found in oraparam.ini, no system pre-requisite checks w
    ill be executed.
    Preparing to launch Oracle Universal Installer from D:\DOCUME~1\ADMINI~1\LOCALS
    ~1\Temp\OraInstall2011-03-02_04-25-26PM. Please wait ... Oracle Universal Instal
    ler, Version 10.1.0.6.0 Production
    Copyright (C) 1999, 2007, Oracle. All rights reserved.
    ...............................................................Val: 0
    Val: 0
    Val: 0
    Val: 2
    Val: 0
    Val: 0
    Val: 0
    Val: 2
    Val: 0
    Val: 0
    Val: 0
    Val: 0
    Val: 0
    Val: 0
    Val: 2
    Val: 0
    Val: 0
    Val: 0
    Val: 0
    Val: 2
    Val: 0
    Val: 0
    path: D:\DOCUME~1\ADMINI~1\LOCALS~1\Temp\OraInstall2011-03-02_04-25-26PM\jre\bin
    ;.;D:\WINDOWS\system32;D:\WINDOWS;D:\StageR12\startCD\Disk1\rapidwiz\unzip\NT;D:
    \MVS\VC\bin;D:\cygwin\bin;D:\WINDOWS\system32;D:\WINDOWS;D:\WINDOWS\System32\Wbe
    m
    toload is D:\DOCUME~1\ADMINI~1\LOCALS~1\Temp\OraInstall2011-03-02_04-25-26PM\Win
    dowsGPortQueries.dll
    100% Done.
    Copying files in progress (Wed Mar 02 16:25:59 IST 2011)
    .................................................Val: 0
    . 79% Done.
    Copy successful
    Setup in progress (Wed Mar 02 16:26:05 IST 2011)
    .....Oracle JAAS [Wed Mar 02 16:26:28 IST 2011]: exception: 9
    opmnctl: opmn started
    Please help me.
    Thanks and regards,
    Adm

Maybe you are looking for