ODBC Data Source Aministrator - new data source- error - SAP BO XI 3.1 SP3

Hello there,
when adding a new mySQL data source to the ODBC Data Source Aministrator on the server we recieve the following error message:
The setup routines for the MySQL ODBC 5.1 Driver ODBC driver could not be loaded due to system error code 126: The specified module could not be found.
(C:\Windows\system32\myodbc5S.dll)
Does anybody know how to solve that problem?
Thanks in advance!
Alex

Hi,
is the .dll in the designated path?
Regards
-Seb.

Similar Messages

Data not going from active data table to new data table -DSO activation iss

Hi Experts,
Data is going from DSO1 to DSO2. I see some of the records are getting missed in DSO 2 which are supposed to come.
There is start routine from DSO1 TO DSO2 and as per the start routine some records should come but they are getting missed.
Apart from that..to DSO 2 there are 4 other DSO sending data.
I tried to send single record and saw that data is going

Hi Experts,
Data is going from DSO1 to DSO2. I see some of the records are getting missed in DSO 2 which are supposed to come.
There is start routine from DSO1 TO DSO2 and as per the start routine some records should come but they are getting missed.
Apart from that..to DSO 2 there are 4 other DSO sending data.
I tried to send single record and saw that data is going to New data table and upon activation it does not go to Active data table.
Please suggest.
Regards
Sudha

Adding Business Days to a Date to create New Date

I am looking to add a formula to auto calculate a new date, but only want to count business Days.
Currently I am using formula to calculate how many days need to be added:
//ODD Priority Business Days
If left ({DEFECT.PRIORITY}, 1)= "1" then 10
else
If left ({DEFECT.PRIORITY}, 1)= "2" then 20
else
If left ({DEFECT.PRIORITY}, 1)= "3" then 50
else
If left ({DEFECT.PRIORITY}, 1)= "0" then 10
Now I need to create a formula to add these numbers to the date field, for conversation purposes, I need to add these business days to my "start date" to equil my "ODD date".
Example, if my "start date" is 1/1/2009 and it is a Priority 2, then I need to add 20 business days to that, so the "ODD date" would be: 1/29/2009.
Please help.

Thank you Garrett Fitzgerald! Please see the modified formula which I meant
{Startdate}
    + {@BusinessDays}
    - DateDiff("ww", {Startdate}, {Startdate} + {@BusinessDays}, crSaturday)
    - DateDiff("ww", {Startdate}, {Startdate} + {@BusinessDays}, crSunday)
Regards,
Raghavendra

Data Guard adding new data files to a tablespace.

In the past, if you were manually updating an Oracle physical standby database there were issues with adding a data file to a tablespace. It was suggested that the data file should be created small and then the small physical file copied to the standby database. Once the small data file was in place it would be resized on the primary database then the repication would change the size on the standby.
My question is, does Data Guard take care of this automaticlly for a physical standby? I can't find any specific reference on how it handles a new datafile.

Never mind, I found the answer.
STANDBY_FILE_MANAGEMENT=auto
Set on the standby database will create the datafiles.

Data vanishing in new fields after request activation in ODS

Hi,
I have added some new fields in ODS and updated it by end routine .Now when i run the dtp and check the data by pressing NEW DATA tab then i am able to see data updated in the new fields.
When i tried to activate that request in ODS ,the values that i populated in new fields got vansihed .I am not able to find wats d issue after activation even though before activating request in ODS all data is perfectly updated in new data table.
Regards,
Montz

I have faced the same issue.Data was coming till new table,but after activation fields were getting
blank.
There is no necessity for doing a dummy mapping. In the transformation screen you will be having an ikon near to the delete
routine symbol with an arrow symbol
similar to select all and unselect all, just clikc on it and then mention the setting as Update all the target fields need to be populated.
This will solve the issue, if it is not solved, then you can make a direct mapping to any of the field in the source, it need not be the
exact field in the target.
Thanks,
Saveen Kumar

APP-PAY-06841: Person change exit between the old and the new date.

Hi,
Please help me by answering this question as very urgent basis.
ABC employee Effective date should be of future dated 10-jan-2011.
But ABC employee joining date has been entered on 10-Aug-2010.
amd also this date is also ended by updating on 10-Dec-2010.
But these records are wrong.This employee's effective date should be form 01-Jan-2011.
how to datetrack.
if iam changing the date bye keeping effective date as 10-Dec-2010 an an iam changing the record to 01-jan-2011,its throwing the error as "**APP-PAY-06841: Person change exit between the old and the new date**"
Thanks&Regards,
Sowmya.K

What is the application release?
Please see these docs.
Error: APP-PAY-06841: Person changes exist between the old date and the new date [ID 399056.1]
APP-PAY-06841 When Changing Latest Start Date Of An Employee Who Was An Ex-Contingent Worker [ID 1146414.1]
Unable To Change Start Date for Employee, Get Error "APP-PAY-06841: Person Changes Exist Between The Old Date And The New Date" [ID 603233.1]
Correcting Latest Start Date in People Screen Gives Error APP-PAY-06841 [ID 368289.1]
How To Change the Latest Start Date of an Employee? [ID 329692.1]
Thanks,
Hussein

Can't we add new dates automatically via MDIS- unmapped values- ADD

Hi,
I have a qualified table with non qualifier as Date(TYPE: Literal Date).
and Qualifiers as Valid from and valid to.
We have 4 dates currently in Date field.
Our incoming file will have New dates init, So want these new dates to be added automaticaly via Import map.
I have set the Date field property as MDIS unmapped fields as - ADD.
But it is not adding new dates.
When i have Date field with Type TEXT and not 'Literal Date' then the new dates from Incoming file are added automatically.
Is this Normal that MDIS unmapped value - ADD will not add date Type fields???
Please Help
KR
John

Hi,
the incoming date format is MM/DD/YYYY.
In configutration parameters it is mentioned as MM/DD/YYYY format.
If the incoming file has Existing dates in MDM then it updates Fine.
But if the Incoming file has a new date then it failes with value exception..
'error message : Type mismatch. Invalid field values.<LF/></Trace>
cant understand this behaviuor of Literal date Field...
Can anyone please help...
KR
John

New Date() in Safari 6.0.3 gives +- 1 hour during timezone change

Hi,
Java Script Date object adds one additional hour when Date is parsed in the below format.
This happens until the 10th hour on timezone change day which is 03/10/2013 (PST to PDT change).
new Date ('3/10/2013 02:00'); =>
Gives Sun Mar 10 2013 03:00:00 GMT-0700 (PDT)
new Date ('3/10/2013 09:00'); =>Gives
Sun Mar 10 2013 10:00:00 GMT-0700 (PDT)
new Date ('3/10/2013 10:00'); => Gives
Sun Mar 10 2013 10:00:00 GMT-0700 (PDT)
Likewise upon timezone change from PDT to PST (First Sunday of November), date parsed using new Date() subtracts 1 hour.
new Date ('11/03/2013 02:00'); =>
Sun Nov 03 2013 01:00:00 GMT-0800 (PST)
new Date('11/03/2013 07:00');
Sun Nov 03 2013 06:00:00 GMT-0800 (PST)
new Date('11/03/2013 08:00');
Sun Nov 03 2013 07:00:00 GMT-0800 (PST)
new Date('11/03/2013 09:00');
Sun Nov 03 2013 09:00:00 GMT-0800 (PST)
Does anyone know if we have a fix for this in upcoming releases?
Thanks.

Somehow, you've got part of Safari's frameworks for Mountain Lion calling for something that doesn't exist in Lion.
Sounds like you already downloaded/installed safari 6.0.3 for Lion via software update, and yet it didn't alter that.
You could try removing /System/Library/StagedFrameworks/Safari/ before running the install again, or 'force' the update using Pacifist... but for ease, if not time too (since there might be other wrong files), I'd suggest you boot into Recovery & reinstall the OS, then run software update (after backing up, of course).

DSO New data table rejects data

Dear SDNers,
I have a critical issue.
I am loading data into a DSO (which has end routine, lookup DSO of 2crore records in production)
In development, it worked good.
In Production it took very long time to load data. I initially thought it might be because of the lookup DSO. But it never loaded the data into new data table. The data load monitor results in yellow always.
I used filter in DTP and loaded only limited data. But this also not loading data. The data load monitor results in yellow again.
Then I found that i am unable to access the new data table's data browser (from manage).
I checked with se11 also, I am able to see the table. But if I click contents, the system hangs.
So what I observe is New data table is not allowing to post any new entries?
Kindly give me some insight regarding solving this issue.
Thanks,
Guru

Hi Prasanth,
I didnt say as i am able to see data in change log. I said I am able to access the data browser of both Active and change log table.
and @Saveen, I donot want to load data manually to new data table.
To be Precise i ll answer pransanth questions here..
What is the status of the load in the monitor screen. Yellow (still running)
Is the load completed or not? what is the record count? No the load is not completing.
Is the request active in the DSo and available for reporting? Request is active
Are you facing this issue for the first time? Yes for the first time and only in this DSO.
Are you sure you have authorizations to check the data through manage screen, try to run the Authorization trace on your id and check if the roles are there for your id or not? Yes, I am able to see active data table, change log etcc. even new table of other DSOs. Only new table of this DSO is inaccessible from manage
See, I used filter in DTP, so it ll bring only limited records from lookup DSO. So no issue with the performance deadlock.
And again I simulated the load and saw, Result package gets filled up perfectly, So the code also works fine.
but if I load the data itll be yellow status with no records added in new table.
In this scenario, New table is inaccesible from manage, So I am pretty sure that both are interrelated issues.
Can some one help me pls..
Thanks,
Guru

Help on moving frames with new Date()

I'm a AS beginer and I need help. I trying to move frames accordind to the hour, for example: at 7 am the at frame 1 and at 8 am at frame 10. I have a code that moves the frames every one hour but I need also to move the by the half hour. For instance: at 7 am frame 1, at 7:30 am frame 5, and at 8 am frame 10. This is the code I have so far that moves ever hour:
// new Date object
myDate = new Date();
myHour = myDate.getHours();
_root.onLoad = function() {
switch (myHour) {
//this start at 7 am and end at 6 am
case 7 :
trace("It's 7:00 AM");
switcher_mc.gotoAndStop(1);
break;
case 8 :
trace("It's 8:00 AM");
switcher_mc.gotoAndStop(3);
break;
case 9 :
trace("It's 9:00 AM");
switcher_mc.gotoAndStop(5);
break;
case 10 :
trace("It's 10:00 AM");
switcher_mc.gotoAndStop(7);
break;
and so on till 6 am. As you see I need some half hours for some frames.
I will appreciate any help.
Thanks in advance
Pao Pao

I'm sorry I don't get what you mean. As you see the frame noves when it get to the "case #" like "case 7" it goes to play when is seven am and case 19 goes to play when is 7 pm. what I want is how to get to 7.5 to go and play at 7:30.

Why does new Date() sometimes use different timezone?

I have date values stored as longs (milliseconds). I debug my app because I somehow get time parts that are not zero (00:00:00). Then I noticed this:
315529200000 : Tue Jan 01 00:00:00 CET 1980
1104447600000 : Fri Dec 31 00:00:00 CET 2004
1059602400000 : Thu Jul 31 00:00:00 CEST 2003
All values have a time of zero (correct) but show a diffetent time zone? How is that possible? I created the time strings all via the same
Systemn.out.println("Date of long: "+new Date(l));
The last number suddenly hast "CEST" instead of "CET" and therefore somewhere else lead to a time 23:00:00.

I just checked this simple case:
I have a date and add exactly 1 day and the result is not the original result + 1 day:
        long d1 = 1099173600000L; //2004-10-31 00:00:00
        System.out.println(new Date(d1));
        long d2 = 86400000L; //1 day in milliseconds
        long d3 = d1 + d2;
        System.out.println(new Date(d3)); //2004-10-31 23:00:00 !!!
]/code]
the output is:
Sun Oct 31 00:00:00 CEST 2004
Sun Oct 31 23:00:00 CET 2004
So, instead of added 1 day, this just added 23 hours!

Error creating a new Data Source for Oracle connection

I'm trying to create a new data source connection to our
Oracle 10gR2 server using ColdFusion Administrator 6.1 Standard on
a Windows 2003 server.
I created a System DSN ODBC connection for Oracle. I can use
the ODBC connection when connecting an Access db to Oracle but when
I try to use it w/ ColdFusion Admin it generates the following
error message:
Connection verification failed for data source: sitest2
[]java.sql.SQLException: [Macromedia][SequeLink JDBC
Driver][ODBC Socket]internal error:
Driver's SQLAllocHandle on SQL_HANDLE_ENV failed
The root cause was that: java.sql.SQLException:
[Macromedia][SequeLink JDBC Driver][ODBC Socket]internal error:
Driver's SQLAllocHandle on SQL_HANDLE_ENV failed
Any help or recommendations would be greatly appreciated.
Tina

The schema/user is system and the password is alpha-numeric, upper/lower case, no special char ...
As a workaround I was able to add the password to the entry in the datasources.xml file and restarted BI Pub.
The JDBC is working ... I can test the connection successfully ... just wont save the entry
Edited by: tread on Oct 17, 2011 11:55 AM

Creating new Data Source Error - Database connection Failed

Successfully installed and configured 11.1.1.3.0. Planning and Essbase dev.
Went to Workspace > Administer > Classing Planning Administration > Manage Data Sources > Create Data Source.
Entered all info about the application database , etc. Getting error "The database connection failed" (I was able to connect with no problem during the install)
SQL server 2005 is on the same physical server.
The diagnostic tool shows database connection passed for planning. A new database was created for the new application.
The server event viewer shows these errors.
"Login failed for user 'xxx-hyperion'. The user is not associated with a trusted SQL Server connection."
Group Policy Error "The client-side extension could not apply computer policy settings for 'Default Domain Policy {xxx}' because it failed with error code '0x80070003 The system cannot find the path specified.' See trace file for more details. "
The Group Policy client-side extension Group Policy Services failed to execute. Please look for any errors reported earlier by that extension.
Any help is appreciated.

Datasource for the application.
I have created a sql db for this planning application (my datasource). See my first message for more details.
When you create a new planning application, you need to associate it with a data source. Since this is a new install, I don't have any data sources available yet.
So, "To create, edit or delete data sources, click Manage Data Source."
This page lets you validate your connection to the database and essbase server. My essbase server connection validates! The database connection does not validate after I enter all the relevant information.
SCREEN INFO BELOW
Fields displayed with an asterisk (*) are mandatory.
Data Source Name *:
Data Source Description:
Select Database Platform
Microsoft SQL Server
Application Database
Server * :
Port * :
Database *:
User *:
Password *:
Click "Validate Database Connection"
ERROR ---> Database connection failed.
So it does not let me create a data source for my new planning application, so I cannot create a new planning application.
Thanks in advance.

How to register 10g ODBC driver list in the Create New Data Source window

Hi
I've checked the dll for the odbc is in the correct home path. However, i don't see the list of the driver when i try to create a new data source. Is there a way besides reinstall the client again.
Thanks
Rgds
Ung

Hi Joe,
According to your description, after you run C:\Windows\SysWOW64\odbcad32.exe, Access driver is not displayed when you expand HKEY_LOCAL_MACHINE>ODBC>ODBCINST.INI node.
The issue is caused by wrong path of odbccad32, please make sure that you are using Administrator account or you have administrative privileges, then refer to the following steps:
Go to Control Panel.
Click Administrative Tools.
Right-click Data Sources(ODBC) to open Properties dialog box.
In Target text box, type %windir%\syswow64\odbcad32.exe
In Start in text box, type %windir%\syswow64, then click OK to save the settings.
If you have any more questions, please feel free to ask.
Thanks,
Wendy Fu

Error when creating a new Data Source

All, This is on BI Publisher 11g.
When I create a new data source and supply password and then click "Apply" button on top right corner, i get following error
Error 500--Internal Server Error
From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
10.5.1 500 Internal Server Error
The server encountered an unexpected condition which prevented it from fulfilling the request.
what am i doing wrong?
Thank you for reading this post.
Thanks,
R

The schema/user is system and the password is alpha-numeric, upper/lower case, no special char ...
As a workaround I was able to add the password to the entry in the datasources.xml file and restarted BI Pub.
The JDBC is working ... I can test the connection successfully ... just wont save the entry
Edited by: tread on Oct 17, 2011 11:55 AM

ODBC Data Source Aministrator - new data source- error - SAP BO XI 3.1 SP3

Similar Messages

Maybe you are looking for