ODBC driver 8.1.5.7 won't configure after installing

After installing the updated ODBC driver 8.1.5.7 that I downloaded from OTN, the Windows apps that we use to dynamically add ODBS DSNs now fails. The app is using standard Windows API calls to dynamically add a DSN from a supplied name provided in the command line. This functionality has worked for many months with the original 8.1.5 ODBC driver but we needed to update it to fix other problems. Now the app is failing. The message I get is "Driver's ConfigDSN, ConfigDriver, or ConfigTranslator failed". Anybody have an idea of what went wrong??

In the release notes that accompany the 8.1.7.2 driver, there's a note that it includes a bug fix that "Fix[es] support of SQLConfigDataSource (Bug1548193)". I suspect I probably broke something when I was on the team for the 8.1.7.1 build when I re-vamped the configuration screen. If this is the case, 8.1.5.7 & 8.1.7.1 would both have this bug. Unfortunately, the ODBC team doesn't appear to be releasing new 8.1.5 drivers, so you'll either have to go back to the previous driver or update your client to 8.1.6 or .7
Justin
null

Similar Messages

Macbook pro won't boot after installing update 10.9.3

macbook pro won't boot after installing update 10.9.3

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

Mac Mini won't start after installing OS X 10.6.3

My Mac Mini won't start after installing Mac OS X Snow Leopard 10.6.3. When I turn it on, the Apple logo appears and the initialization line starts to fill, but it suddenly stops. It does that again and stops at the same point, but this time it shuts down. What should I do?

If you are coming from 10.5.8, hopefully you backed up your important data first. Your mini will need at minimum, 1 GB of RAM to install Snow Leopard and at least 5 GB of storage remaining on your boot drive.
I treat 10.6.3 as a fresh, full install over a 10.5.8 system. That means I choose Disk Utility from the Installer's menu and repartition the boot drive as a single partition, Mac OS X Extended (Journaled) format, and use the GUID partition scheme from the options button. At this point, while still in Disk Utility, I would verify the drive under First Aid.
Then I turn the installer loose, and reboot into a working 10.6.3 system, ready for the software updates that take the machine to 10.6.8.
So, following the above guidelines, reinstall 10.6.3.

My apps won't update after installing IOS 6.0.1. They get stuck. What's wrong?

Apps won't update after installing IOS 6.0.1. They get stuck. What's wrong?

You may of had a corrupted install. Connect to iTunes backup then restore. Or update the apps on itunes then sync to the iPhone

HT5628 After running bootcamp, DVD drive is detected by Windows 8. But after installing drivers, no longer can detect. Device Manager shows that DVD drive is unplugged! Drivers in Bootcamp "removed" the DVD drive!

After running bootcamp, DVD drive is detected by Windows 8. But after installing drivers, no longer can detect. Device Manager shows that DVD drive is unplugged! Drivers in Bootcamp “removed” the DVD drive. I think there is an issue because I reinstalled Windows 8. If I don't install driver, then I have reduced functionality (no Apple keyboard, no sound etc), but once I install driver, I lose my DVD drive.

Hi, guys, I have had the exact same problem since the summer of 2010. Here's what I was able to find out.
Deleting upper/lower filters, running all those Fix Ya programs and other Microsoft crap is useless. This problem is most certainly has nothing to do with registry of any software on your computer. I took my HP 9620us to a couple of repair places and, they tried a lot of things and it appears that the root of this problem is a faulty motherboard connection. Of course, it costs about 400 bucks to fix it so I'm not sure I want to pay this kind of money.
Anyway, if somebody was able to fix it PLEASE post here to let us know. Again I am 99 per cent sure it's some piece of hardware in the motherboard.

External keypad won't work after installing OS 7.

External keypad won't work after installing OS 7. I have a "Zagg" keyboard that won't pair now to OS 7,...Why?

They do work. I have one and mine is working. Have you tried to reset your iPad? HOlding down teh sleep and home keys until it reboots then try pairing again.
A slightly more drastic thing is to go into the settings and reset all settings. THe downside, you will need to retweak your device but it can help fix keyboard glitches.

Fire fox won't open after installing update. But it shows in my task manager as running

Firefox won't open after installing update 3.6.6 Solution page says problem has been solved, but the solution has been removed.
== This happened ==
Every time Firefox opened
== After installing update 3.6.6 ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; Trident/4.0; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729; Media Center PC 6.0)

Hello Chris.
Hopefully this support article is what you need:
https://support.mozilla.com/en-US/kb/Firefox+will+not+start

Printer won't work after installing mountain lion?

printer won't work after installing mountain lion?

Assuming you've first checked Software Update to see if there are any updated drivers and it's still not working, you could try resetting the printing system.
System Preferences>Print & Scan, Control+Click or Right Click on a printer on the left and select 'reset printing system'. All printers will be deleted and need to be added again.

MacBook Air won't restart after installing Mavericks

My MacBook Air (v Fall 2011) won't restart after installing Mavericks. I have done the instal several times, done the disk repair, I have had 2 visits to the local Apple store where they installed Mavericks with their software only to return home and have it fail again. Does anyone know of issues with the SSD or memory?
Next visit to the Apple store is Tuesday morning 12-17-13. Anywthing that can help us would be appreciated. Tks David

Ok. Nevermind. I guess I had to Force Quit/Relaunch Finder.

Motion 3 Won't Open After Installing

Hi,
I reinstalled Motion 3 after doing it 2 days ago because the beach ball keeps coming up and never leaves causing me to force quit. I let it stay up one night and when i awoke 8 hours later it was still up. thus, i reinstalled after trashing it. there's never any motion files in the library to delete and no motion files in the receipts. this time it won't open after installing it and booting down computer. I have lion 10.7.5 the fcp studio disk that i install for motion says version 3 but could have sworn on the computer when it was working it said motion 4. Any suggestions? did all my software updates too.
Thanks,
joe

Motion 3 is part of Final Cut Studio 2. There are many threads on these boards about trying to get those apps to install properly on OS versions above 10.6.8. Here's one such thread. A search will bring up additional ones.
Russ

Iphone 4 won't open after installing ios 7.1

Please help. My iphone 4 won't open after installing ios 7.1.. I already connected it to my pc but still didn't open. I waited for a long time, press the on/off, home buttons but still didn't work. Thanks Jah bless all..

Honsetly I do not know if they will charge you, however apple products usually have a one year warranty, such as your charging cable, might. But if you tried to use another charging cable then you will want to make an appointment with Apple. good luck

Safari won't start, after installing X Lion

Safari won't start, after installing X Lion

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the page that opens.
Step 1
Enter the name of the crashed application or process in the Filter text field. Post the messages from the time of the last crash, if any — the text, please, not a screenshot.
Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting.
Step 2
Still in the Console window, look under User Diagnostic Reports for crash reports related to the process. The report name starts with the name of the crashed process, and ends with ".crash". Select the most recent report and post the contents — again, the text, not a screenshot. In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.) Please don’t post shutdownStall, spin, or hang logs — they're very long and not helpful.

Early 2008 Mac Pro won't boot after installing 2nd DVD drive

All,
I purchased a Pioneer DVR-117D from Mac Sales and after installing it in my new refurbished 2008 Mac Pro it won't boot. My MP will boot if I remove the drive. According to the Mac Sales website this drive should work fine in my MP. Any ideas as to why this is happening. I literally just got my MP today and installed the drive. Is it the drive or the Mac Pro. Thank you all.

The drive was set to master, I switched it to CS before I left for work but haven't tried reinstalling it. I will try when I get back and let you know if it worked. Thank you again.

Windows 7 won't start after installing graphic driver

hi guys
i have a probook 4530s (i5) laptop and recently i encountered a problem with graphics.
after installing a fresh copy of windows 7 x64, i installed lates driver for graphics (sp55947) but after a reset, windows won't pass the first "starting windows" page unless i go to bios setting and uncheck "switchable graphics" option,
but after that i dont have the radeon 6490m in my device manager anymore. i also tried the latest update for bios but no success with the problem..
i hope you can help me..

@M3is4M
‎Thank you for using HP Support Forum. I have brought your issue to the appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post ( serial numbers and case details).
If you are unfamiliar with the Forum's private messaging please click here to learn more.
Thank you,
Omar
I Work for HP

External drive won't boot after install?

I tried installing mountain lion onto an external SSD drive. At first it worked, using my USB install drive and selected my external drive as the target. All the files are copied over and asked me to restart. However, after restart all it did is booted back into my internal drive OSX. Even if I held down the option button it won't allow me to boot the external drive. Any ideas? I'm doing this from the retina macbook pro.

Install or Reinstall Lion/Mountain Lion from Scratch
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Partition and Format the hard drive:
1. Select Disk Utility from the main menu and click on the Continue button.
2. After DU loads select your external hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Security button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
Reinstall Lion/Mountain Lion: Select the External drive, then select Install Lion/Mountain Lion and click on the Install button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible
because it is three times faster than wireless.

ODBC driver 8.1.5.7 won't configure after installing

Similar Messages

Maybe you are looking for