ODBC error when trying to create template table
Hi,
I am a new comer to BODS and am facing this basic issue. Every time I try to run the job I get this:
976 3612 CON-120302 12/23/2013 2:48:37 AM ODBC call <SQLDriverConnect> for data source <srvdc344111> failed: <[Microsoft][ODBC SQL Server Driver][DBNETLIB]SQL Server
976 3612 CON-120302 12/23/2013 2:48:37 AM does not exist or access denied.>. Notify Customer Support.
I can see that the server does have the native client installed and also has the dsn(srvdc344111) is created on the server and client systems(local and system) from where the jobs is initiated. I have checked the two notes but that did not help much: 1514119 1468283
When I try to open a table from the designer using the server name as srvdc344111 I am able to do that successfully.
Would appreciate if someone can shed some light on this please. Is it because I am missing something?
Thanks, all help welcome .
Regards,
Manish
Hi Arun,
Thanks for all your help. Issue is now resolved.
Basically I have a issue on our network where it was required for the fully qualified domain name to be mentioned in the DataStore as the BODS server itself and the test server with the test DB are on separate domains.
Once I changed the server name to have the fully qualified domain name the connection was successful and the job ran successfully. Thanks again.
Funny thing was, I did not require the FQDN when using it in the DataStore in the designer, and this was because the Citrix server publishing the designer was in the same domain as the test DB server, whereas the BODS server is in a different domain from which it could not reach my test server without using the FQDN.
Hope it makes sense .
Regards,
Manish
Similar Messages
-
Error when trying to create a JCO Destination
Hi
I receives the following error when trying to creat a JCO Destination, clicking on the button in the host:port/webdynpro/dispatcher/sap.com/tcwdtools/Explorer
I get the following error:
Error stacktrace:
java.lang.NullPointerException
at com.sap.tc.webdynpro.serverimpl.wdc.sl.SystemLandscapeFactory.checkStatus(SystemLandscapeFactory.java:880)
at com.sap.tc.webdynpro.services.sal.sl.api.WDSystemLandscape.checkStatus(WDSystemLandscape.java:469)
at com.sap.tc.webdynpro.tools.sld.NameDefinition.updateJCODestinations(NameDefinition.java:272)
at com.sap.tc.webdynpro.tools.sld.NameDefinition.updateNavigation(NameDefinition.java:237)
at com.sap.tc.webdynpro.tools.sld.NameDefinition.wdDoInit(NameDefinition.java:144)
at com.sap.tc.webdynpro.tools.sld.wdp.InternalNameDefinition.wdDoInit(InternalNameDefinition.java:223)
at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.doInit(DelegatingView.java:61)
at com.sap.tc.webdynpro.progmodel.controller.Controller.initController(Controller.java:215)
at com.sap.tc.webdynpro.progmodel.view.View.initController(View.java:274)
at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:200)
at com.sap.tc.webdynpro.progmodel.view.ViewManager.getView(ViewManager.java:540)
at com.sap.tc.webdynpro.progmodel.view.ViewManager.bind(ViewManager.java:398)
at com.sap.tc.webdynpro.progmodel.view.ViewManager.getView(ViewManager.java:555)
at com.sap.tc.webdynpro.progmodel.view.ViewManager.bindRoot(ViewManager.java:422)
at com.sap.tc.webdynpro.progmodel.view.ViewManager.init(ViewManager.java:130)
at com.sap.tc.webdynpro.progmodel.view.InterfaceView.initController(InterfaceView.java:43)
at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:200)
at com.sap.tc.webdynpro.progmodel.view.ViewManager.getView(ViewManager.java:540)
at com.sap.tc.webdynpro.progmodel.view.ViewManager.bind(ViewManager.java:398)
at com.sap.tc.webdynpro.progmodel.view.ViewManager.makeVisible(ViewManager.java:620)
at com.sap.tc.webdynpro.progmodel.view.ViewManager.performNavigation(ViewManager.java:263)
at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.navigate(ClientApplication.java:740)
at com.sap.tc.webdynpro.clientserver.task.WebDynproMainTask.handleActionEvent(WebDynproMainTask.java:350)
at com.sap.tc.webdynpro.clientserver.task.WebDynproMainTask.execute(WebDynproMainTask.java:640)
at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:59)
at com.sap.tc.webdynpro.clientserver.cal.ClientManager.doProcessing(ClientManager.java:251)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doWebDynproProcessing(DispatcherServlet.java:154)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:116)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:55)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:391)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:265)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:345)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:323)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:865)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:240)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:37)
at com.sap.engine.core.cluster.impl6.session.UnorderedChannel$MessageRunner.run(UnorderedChannel.java:71)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:94)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:162)
Any ideas?
Regards
Kay-ArneHi,
Have you configured your SLD? Check JCO Destination error out or search for "com.sap.tc.webdynpro.serverimpl.wdc.sl.SystemLandscapeFactory.checkStatus" in the SDN forums.
Best regards,
Vladimir -
Error when trying to create XUSER information for SAPServiceSID
Hi all,
I am getting the following error when trying to create the XUSER information for the SAPServiceSID user on a WINDOWS/MAXDB 7.9 install.. Does anyone know a FIX for this?
>xuser -c .\SAPServiceSID -U c -u CONTROL,P@ssw0rd -d SID -n HOSTNAME -S INTERNAL -t 0 -I 0 set
FATAL: Close xuser entry failed: could not write USER data [1307]
I am running the command as the SIDADM user.
I have tried the solutions in the following notes without success:
39642
1542818
39439
1875264
1409913
Thanks!Hi Jayson,
Try this.
Solution
Add the "Administrators" group under:
Control Panel
-> All Control Panel Items
-> Administrative Tools
-> Local Security Policy
-> Local Policies
-> User Rights Assignment
-> Take ownership of files or other objects
You check you command and modify.
xuser.exe -c Hostname\SAPServiceSID -U DEFAULT -u Username, Password -d SID -n Hostname -S Schema_Name -t 0 -I 0 set'
Regards,
V Srinivasan -
Error when trying to create a site collection
Hi,
I receive the following error when trying to create a site collection in sharepoint 2013. Any ideas of what I can do to resolve?
Sorry, something went wrong
Failed to call GetTypes on assembly Microsoft.AnalysisServices.SharePoint.Integration, Version=11.0.0.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91. Method 'ParseLogFileEntry' in type 'Microsoft.AnalysisServices.SharePoint.Integration.ConnectionUsageDefinition'
from assembly 'Microsoft.AnalysisServices.SharePoint.Integration, Version=11.0.0.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91' does not have an implementation. Method 'ParseLogFileEntry' in type 'Microsoft.AnalysisServices.SharePoint.Integration.RequestUsageDefinition'
from assembly 'Microsoft.AnalysisServices.SharePoint.Integration, Version=11.0.0.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91' does not have an implementation. Method 'ParseLogFileEntry' in type 'Microsoft.AnalysisServices.SharePoint.Integration.LoadUsageDefinition'
from assembly 'Microsoft.AnalysisServices.SharePoint.Integration, Version=11.0.0.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91' does not have an implementation. Method 'ParseLogFileEntry' in type 'Microsoft.AnalysisServices.SharePoint.Integration.UnloadUsageDefinition'
from assembly 'Microsoft.AnalysisServices.SharePoint.Integration, Version=11.0.0.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91' does not have an implementation.
thanks,
SherazadHi ,
Based on the error message, please check whether you have installed the spPowerPivot.msi add-in on each of your SharePoint server, and ran the configuration wizard, make sure that the powerpivotwebapplicationsolution.wsp
is deployed correctly.
Thanks,
Eric
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Eric Tao
TechNet Community Support -
Portal runtime error when trying to create new Iviews in EP
Hi
Require an Urgent help
getting portal runtime error when trying to create a new iView in portal. I am unable to create a single iView in portal.
It was working before please see this error message
Portal Runtime Error
An exception occurred while processing a request for :
iView : com.sap.portal.appintegrator.sap.WebDynproPageBuilder
Component Name : com.sap.portal.appintegrator.sap.WebDynproPageBuilder
Error occurs during the rendering of jsp component.
Exception id: 05:20_12/01/08_0004_17115850
See the details for the exception ID in the log file
AM Iworking on NW2004s sp11. I was able to create iViews on this system before
let me know where to check the log file also. Points will be awarded
Thank you
Krishna Kanth
Edited by: siddi siddi on Jan 13, 2008 12:05 AMKrishna Kanth,
logs can be read from nwa, if you hv the relevant access or get portal admin to pass the defaulttrace file to you. Login to nwa, navigate to Monitoring-Logs and traces and select (either default trace or last 24hrs) to view the logs. hope this helps
prachi -
Getting error when trying to create Exchange Connector in System Center Service Manager 2012
Getting error when trying to create Exchange Connector in System Center Service Manager 2012
The connection to the server was unsuccessful. Please check the server name and/or credentials entered.
Additional Information: The server URL is not accessible or the user does not have permission to access it (message: The request failed. The remote server returned an error: (401) Unauthorized.
Warm Regards, Pramod Kumar Singh Manager-ITSomeone sorted out this issue by installing API 1.2 and copying the dll files to the service manager server ,service folder and replacing it with API 2.0 dll files.
Also, your question is related to SCSM, please post at SCSM forum if you have further question.
Juke Chou
TechNet Community Support -
I get this error when trying to create a ringtone - iTunes could not connec
I get this error when trying to create a ringtone:
"iTunes could not connect to the iTunes Store - an unknown error occurred (11556)"
But I CAN connect - if I click on the iTunes Store, it connects right away.
I want to make a ringtone from a song that I purchased, but all I get is the same error message.
iTunes 9.2.2, Ireland iTunes Store.have you seen this KB article: http://support.apple.com/kb/HT1398 ?
JGG -
Solution to stop error when trying to create a portfolio
Hi all,
I finally found a way to make a portfolio in acrobat pro 9. The problems I was having were explained in the thread titled "Acrobat pro 9 has a stop error when trying to create a portfoloi"
It seems ther is another way to do this, by selecting 'combine' and then 'merge files into a single pdf' rather than 'assemble pdf portfolio'.
The merge option also gives the choice of making a pdf package and does not result in a stop error with authplay.dll.
So much for Adobe support who conuld not tell me this or respond to support requests.
All I have to do now is to remember to not click on 'assemble pdf portfolio' when I want to assemble a pdf portfolio but "merge files into a single pdf" when I want to assemble a pdf portfolio.
I would still like to hear from Adobe why acrobat pro 9 has a stop error with authplay.dll.
I feel a lot happier now.I read through the pdf wth your emails to/from customer support. I'll have to defer to someone else because it seems you have tried what I would suggest.
If someone else does not respond with a better plan and you are willing to spend a bit more time before writing off Acrobat 9, I would try the process below one last time. (If you are using a CS suite, while authplay.dll is found in each of the directories, it does not appear that the issue extends to the other programs.)
1. Using Add/Remove Programs, uninstall all Adobe Acrobat and Reader software and uninstall the Adobe Flash Player Active X and Adobe Flash Player Plugin. If you have it, uninstall Adobe Air.
2. In C:\Documents and Settings\(your profile name)\Application Data\Adobe, delete the Acrobat and Adobe PDF folders if they still exist.
3. Reinstall only Acrobat 9.
4. From Acrobat, run the updater Help > Check for Updates and install all updates.
5. Verify Adobe Acrobat is now version 9.2: Help > About Adobe Acrobat Pro (If for any reason it is not 9.2, use the update on http://www.adobe.com/support/downloads/product.jsp?product=1&platform=Windows
6. Test
Message was edited by: Anna Nmty
While searching for a solution, I just saw your post over at acrobatusers.com (http://www.acrobatusers.com/forums/aucbb/viewtopic.php?id=15765). Looks like my advice was largely a duplicate, although your event log indicates Acrobat did not update properly. -
500 internal server error when trying to create users
I am getting a 500 internal server error when trying to create users. What is the cause? We tried reinstalling the latest java jdk release and that didn't help.
Check whether your DBControl or ASControl service is still running or crashed. EM is not able to connect to the Management Server.
For instance in Windows, you may see that the Servise is not started. Then check for error logs in $ORACLE_HOME/sysman/logs for any related error messages in the log files -
Sharepoint designer 2010 32 bit error when trying to create a workflow
Windows 7 64 bit enterprise pc's with sharepoint designer 32 bit see these errors when trying to create a workflow on any Sharepoint 2010 farm - dev and production
"The list of workflow actions on the server references an assembly that does not exist. Some actions will not be available. The assembly is Microsoft.Office.Workflow.Actions, Version=14.0.0.0 ..."
"The list of workflow actions on the server references an assembly that does not exist. Some actions will not be available. The assembly is Microsoft.SharePoint.WorkflowActions, Version=14.0.0.0 ..."
"The list of workflow actions on the server references an assembly that does not exist. Some actions will not be available. The assembly is Microsoft.SharePoint, Version=14.0.0.0 ..."
Using an XP pc and 32bit designer user able to create workflow. We have to use 32 bit designer as we have Office 2010 32 bit for compatiblility reasons
Any ideas on how to resolve?Hi Nick, check out this link for possible solutions:
https://mohamedelkassas.wordpress.com/2014/12/26/the-list-of-workflow-actions-on-the-server-references-an-assembly-that-does-not-exist-some-actions-will-not-be-available/
cameron rautmann -
I'm trying to share a folder in OneDrive with another user in my organization, and create a link so that people outside of the company can see the folder. Whenever I try to create a link I get an error that says: "Couldn't create the link sorry something
went wrong operation is not valid due to the current state of the object" How do I resolve this?Hi,
Sorry for replying late and I noticed that you posted another thread in this forum:
http://social.technet.microsoft.com/Forums/en-US/2b8c6f54-9c59-4b37-b28f-1d49a1b7913b/operation-is-not-valid-due-to-the-current-state-of-the-object-error-when-trying-to-create-a-link?forum=officeitpro
I've replied and kindly refer to it to see if it is helpful.
Regards,
Melon Chen
TechNet Community Support -
HELP!! just finished a 20pages report and when trying to create the table of contest I lost EVERYTHING... there is nothing left of my work. WHY????
Hi Peter,
Yes I'am in 5.2, I did mention it right after.
This is wonderful Peter, great advice. I got to have my latest version before I created my table of contents.
In Pages > Menu > File > Revert
and see what you get.
Peter
Thank you so much!!
Have a wonderful day -
Fatal error when trying to add derived table
Hello,
I'm new at desiging a universe. I get the following a fatal error when trying to add a derived table to my universe:
1 processor x Family 15 Model 0 Stepping 0
Windows 2000 Workstation v5.1 build 2600 (S)
Physical Total/Avail: 2.097.151 Kb / 2.004.940 Kb
Temp directory C:\DOCUME1\xxxxxx\LOCALS1\Temp\ (1 Kb available)
'Unknown' video card
1280 x 768 in true color
(doesn't make sense to me)
I use an ODBC connection that connects to a MySQL database. When I test the connection it's fine.
I am trying to add a derived table because it seems that my universe cannot produce LEFT OUTER JOINS. I read somewhere that I should set my ansi92 parameter to YES instead of NO. But, everytime I re-open my universe, it sets itself automatically to NO again.
My utlimate goal is :
For example, list ALL the people, left join my table to their websites, but return ALL the people, even if they don't have a website.
I dont' understand, my join should be simple enough.
Anybody knows what could be causing all these restrictions ?
Thanks for you help.
Edited by: Sose Canadian on Feb 9, 2009 9:40 PMHi Sose,
In BusinessObjects (Universe) Designer, the outer join option in a join is not available and is dimmed when using a Generic ODBC connection.
Try Following Solutions:
Solution : 1
When using an ODBC connection the odbc.prm must be modified on the machine where BusinessObjects Designer is used.
Use the following steps to modify odbc.prm:
1. Locate odbc.prm in the following folder:
\Business Objects\Business Objects Enterprise 11\win32_x86\dataAccess\Connection Server\odbc
2. Open odbc.prm in a text editor and modify the parameter 'EXT_JOIN' so its value is 'YES' instead of 'NO'.The outer join option is now available in BusinessObjects Designer.
If the outer join option is still not available after following the steps above. open odbc.prm in a text editor and modify the parameter OUTERJOINS_GENERATION. Change its value from 'NO' to either 'ANSI92' or 'ODBC'.
Solution : 2
This can occur when user is using a non-database specific middleware such as generic ODBC. Generic ODBC allows creating a successful connection and universe, however will not allow the Outer Join option.
The syntax for outer joins is specific to each database and the Generic ODBC driver only lets you access standard common features of all ODBC data sources.
Ensure that you are using the database specific middleware to create the connection.
I Hope this Helpsu2026.
Thanksu2026.
Pratik -
Error when trying to create new element in workflow container
hi experts,
I hit an error 'cusomer-own workflow are not allowed to be configure" when trying to create a new element in the container.
have anybody come across this problem and how to overcome it
TQAren't customer task not used anymore?
Or am I mixing things up here.
Well the problem isn't a problem it is SAP standard behaviour you simply can't configure customer tasks (type T in PFTC)
You can only configure Standard Tasks (TS) or workflow templates (WS)
Kind regards, Rob Dielemans
Edited by: Rob Dielemans on May 29, 2009 12:51 PM
Just had a look at the SAP help and indeed types T aren't allowed anymore SAP gives the solution to copy the customer task, this will automatically change it to a standard task -
Error when trying to create Delivery
Hi SAP Gurus
When trying to create delivery from Sales order(Va02>Sales document>Delivery),it is taking to Delivery(Vl01n).But there at the initial screen itself it is displaying the error message"Order doesnot exist"
Kindly let me know where could be the issue.
Regards
SushmithaHi Laxmipathy
Tx for your reply.
I have checked the doc flow and could see no blocks.
No reason for rejections.
Also seen VOV7 and checked for the item cat details.I could see "H-delivery Related Billing-No Zero Quantities" maintained for Billing Relevance field.
Tx in advance.
Regards
Sushmitha
Maybe you are looking for
-
How do I view what slide I'm on out of how many I have total in keynote? I know on powerpoint it's at the bottom right of the window but I can't find it on keynote, nor can I find the option to make it appear. Any help would be greatly appreciated.
-
Issue with Java date when different timezone involved
Hi I am facing a problem with java util and SQL date due to different time zones, We have a applet which displays data as gant chart( microsoft project type) We have our server in NY (EST) which reads data from database (in EST) and sends this data t
-
How can I copy the titles from a project volume one use them for the rest?
I'm editing a four DVD set, and would like to use the same opening titles and credits for each. How can I copy the titles from volume one and use them for the rest? Thank you.
-
Connecting WIRED Blue ray player to network
I only have coax running to my TV... does the Motorola NIM100 NIM 100 Cable Modem work in such a manner that I could plug the blue ray Ethernet connection into it & the coax going to the TV Basically acting as a splitter. Thanks
-
Hi ALL Logical bitwise comparison operator 'O' is used between two operands say A and B as "A O B". A is of type INT1 and B is of type X. The above mentioned line was working fine till enabling unicode check. But now it says A should be of type X or