ODBC SQLRemoveDriver: Incorrect return value?

(Not sure if this is the right forum, suggestions welcome.)
SQLRemoveDriver appears to be returning TRUE even if there are no drivers installed. This contradicts the documentation (https://msdn.microsoft.com/en-us/library/ms713723.aspx):
Returns
The function returns TRUE if it is successful, FALSE if it fails. If no entry exists in the system information when this function is called, the function returns FALSE.
Known issue? Or am I misunderstanding the doc? Thanks for any insights.
Repro:
DWORD usage_count;
while (SQLRemoveDriver((LPCSTR)driver->name, FALSE, &usage_count) == TRUE) {
printf("Driver unregistered successful: usage count is %d\n", usage_count);
Output:
1>------ Build started: Project: win_driver, Configuration: Debug Win32 ------
1> driver.vcxproj -> E:\odbc\driver\output\Debug\driver.dll
1> Driver unregistered successful: usage count is 0
1> Driver unregistered successful: usage count is 0
1> Driver unregistered successful: usage count is 0
1> Driver unregistered successful: usage count is 0
1> Driver unregistered successful: usage count is 0
1> Driver unregistered successful: usage count is 0
1> Driver unregistered successful: usage count is 0
1> Driver unregistered successful: usage count is 0
1> Driver unregistered successful: usage count is 0
1> Driver unregistered successful: usage count is 0
1> Driver unregistered successful: usage count is 0
1>C:\Program Files (x86)\MSBuild\Microsoft.Cpp\v4.0\V120\Microsoft.CppCommon.targets(132,5):
warning MSB5021: "cmd" and its child processes are being terminated in order to cancel the build.
1>A task was canceled.
1>A task was canceled.
Build has been canceled.

p.s. Appears to be an issue only on Win8. On Win7 it behaves as expected.

Similar Messages

A problem about incorrect return value

Hi,expert:
   we have a scenario ECC(Proxy)->PI->P6(soap), request and response message use the xslt mapping.
   The response message contains chinese characters,but when the message come to PI,the chinese charater is garble.
   The xml encoding is UTF-8.
   I have tested this interface by soapui,and it can return the correct character.
   How can i solve this problem?

Try to change the XML encoding by using XMLAnonymizerBean adapter module.
http://help.sap.com/saphelp_nw04/helpdata/en/45/d169186a29570ae10000000a114a6b/content.htm
Chinese Simplified (GB18030) GB18030
Chinese Simplified (GB2312) GB2312
Chinese Simplified (HZ) HZ
Chinese Traditional (Big5) Big5
Japanese (Shift-JIS) Shift_JIS
Japanese (EUC) EUC-JP
Korean EUC-KR
Unicode (UTF-8) UTF-8
refer this
http://htmlpurifier.org/docs/enduser-utf8.html

Incorrect data value selected when clicking on slicer entry in Excel Services

We have uploaded various Excel 2013 files containing pivot tables to Sharepoint 2013 and viewed the pivot tables in a browser. The referenced pivot table data is normally a SSAS tabular model. This has been working fine for over 12 months apart
from one irritating feature.
Sometimes a clicked slicer entry does not result in the correct slicer value being selected. This typically occurs after using the mouse scroll button to scroll down a list of entries in a slicer. When using the keyboard arrow keys to highlight a slicer
value and pressing Return to select an entry, the correct value does always seem to be selected - so it appears to point to a mouse scrollwheel issue. Also, after scrolling through slicer entries using the mouse scroll wheel, there appears to be some sort
of slicer refresh problem that results in a blank entry/entries being displayed either at the top or bottom of a slicer. However, sometimes the correct 'tooltip' is shown for this blank slicer entry. One other point - when using the slicer scrollbar the scroll
down a list of slicer entries using Firefox, the problem does not seem to occur. IE does not seem to display the same type of slicer scrollbars (only active when the mouse hovers over the slicer) and so this is more difficult to replicate in Ie.
The worrying factor is that the user is often unaware that the incorrect slicer value has been selected. The problem can be replicated in both IE11 and Firefox. Also our client systems accessed via Citrix display the same problems.
Any help greatly appreciated. Thanks.
Graham Goodwin Email: [email protected]

Hi Graham,
i built the same version, please correct me if should your environment, is sharepoint 2013 with march 2013 update and your office also the same update. in my labbox seems the issue is not re-producible.
after some discussion with my colleague, seems there was issue similar like this back in 2010 Excel and the remedy is to update the excel services and to re-install the power pivot at SQL server. back then the issue is because when we scroll the selection,
it should be locked, so then when we scroll it may have the position to update and refresh the data. one of the workaround is by clicking the item and press enter, by doing this it will refresh the page correctly. the link was:http://www.microsoft.com/en-us/download/details.aspx?id=29074
i tried to look at our update for the excel services 2013, there are updates in every cumulative updates but there is no particlular update regarding this issue, perhaps you may try this to check in your development environment, if should it may fix the
issue.
to re-install the power pivot, you may need to do this on your sql side.　
http://technet.microsoft.com/en-us/library/ee210708.aspx
http://technet.microsoft.com/en-us/library/ee210671.aspxi may suggest you to check the ULS log, if should there are issues with powerpivot also, to make sure if should there are no issue
regarding power pivot. if there is no issues on the powerpivot, then you may need to open a ticket to report this issue, so that we can have a detailed checking to your environment remotely.
Regards,
Aries
Microsoft Online Community Support
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

How to get both, the ResultSet and Output (return value) from Oracle Stored Procedure

Hi! I am doing a conversion from MSSQL to Oracle with C++ and MFC ODBC. Any comment is appreciated!! I have Oracle 8i and Oracle ODBC 8.1.6 installed.
My question is how to retrieve the return value AND ALSO the resultSet at the same time by using Oracle function without modifying my souce codes (except puttting mypackage. string infron of my procedure name, see below).
-- My source code in C++ with MSSQL ....
sqlStr.Format("{? = call ListOfCustomers(%i)}", nNameID);
RcOpen = CustomerList.Open(CRecordset::forwardOnly, sqlStr, CRecordset::readOnly );
Where CustoemrList is a Crecordset object...
IN DoFieldExchange(CFieldExchange* pFX) I have ...
//{{AFX_FIELD_MAP(CQOSDB_Group)
pFX->SetFieldType(CFieldExchange::outputColumn);
RFX_Long(pFX, T("Name"), mCustoemrName);
//}}AFX_FIELD_MAP
// output parameter
pFX->SetFieldType( CFieldExchange::outputParam );
RFX_Int( pFX, T("IndexCount"), mCustomerNumber);
-- m_CustomerNumber is where i store the return value!!!
-- In Oracle Version, i have similar codes with ...
sqlStr.Format("{? = call mypackage.ListOfCustomers(%i)}", nNameID);
RcOpen = CustomerList.Open(CRecordset::forwardOnly, sqlStr, CRecordset::readOnly );
-- I have oracle package/Body codes as following...
create or replace package mypackage
as
type group_rct is ref cursor;
Function listgroups(
nameID NUMBER ,
RC1 IN OUT Mypackage.group_rct ) return int;
end;
Create or replace package body mypackage
as
Function listgroups(
NameID NUMBER ,
RC1 IN OUT Mypackage.group_rct )return int
IS
BEGIN
OPEN RC1 FOR SELECT Name
from Customer
WHERE ID = NameIDEND ListGroups;
END
return 7;
END listgroups;
END MyPackage;
Ive simplified my codes a bit....
null

yes, it is exactly what i want to do and I am using Oracle ODBC driver.
I tried using procedure with 1 OUT var fo numeric value and the other IN OUT ref cursor var instead of function, but error occurs when I called it from the application. It give me a memory ecxception error!!
sqlStr.Format("{? = call ListOfCustomers(%i)}", nNameID);
RcOpen = CustomerList.Open(CRecordset::forwardOnly, sqlStr, CRecordset::readOnly );
it seems to me that the ? marker var is making all the trouble... can you please give me any more comment on this?? thanks!
null

How to use stored procedures in DIAdem and Can the stored procedures be used to return values?

Can anyone please tell me how to use stored procedures in diadem and to return values from it. Its really important, can you please answer it at the earliest.
Thanks In advance
spiya

Hi Spria,
I'm very sorry for the mix-up, I thought Allen was going to answer you back with the particulars that we found out. Check out the attached Word document and the below tidbits:
The built-in DIAdem ODBC functions {SQL_...()} can only call stored functions, which return a scaler result {found then in SQL_Result(1,1)}. The syntax for this with an ORACLE db is
"select function(parameters) from package"
...where package defaults to "dual" if you don't use your own package.
There might be exceptions to that though, and the syntax will be different for other databases. Note that stored ORACLE procedures can NOT be called from the ODBC functions, instead you must use either ADO function calls in the DIA
dem VBScript or the OO4O COM wrapper that ORACLE provides (this is described in further detail in the below Word document).
Hope this helps,
Brad Turpin
DIAdem Product Support Engineer
National Instruments
Attachments:
Calling_ORACLE_Stored_Procedures_from_DIAdem.doc ‏28 KB

Not able to get Oracle stored procedure return value passed to Powerbuilder

I have an Oracle Stored Procedure that receives a string value and returns a string value.. When I call it from Powerbuilder, it executes but does not send the return value of a string back. I am trying to encrypt a string in Powerbuilder, pass it to a .net web page and then decrypt so I can check the security tables for permissions to view the web page. I have tried creating a simple stored procedure that takes a string and returns a string to Powerbuilder; but even that is not working. Any suggesstions?
Oracle Procedure:
CREATE OR REPLACE
PROCEDURE               TESTINOUT_VARCHAR
( P_STRING IN VARCHAR2, P_OUT OUT VARCHAR2)
IS
   BEGIN
      P_OUT := P_STRING || 'TESTING';
END TESTINOUT_VARCHAR;
Powerbuilder Call:
string p_string ='                                 '
Declare TestingString procedure for TESTINOUT_VARCHAR(:ls_group, :p_out) using SQLCA
Execute TestingString;
IF SQLCA.CODE = 0 THEN
FETCH TestingString into:p_out;
End If
p_string = p_out;

Hello John,
I'm not sure if you already found a solution using an ODBC connection.
Below the solution with an RPC call:
Create a user object (uo_trans) of type transaction with the following local external function:
subroutine TESTINOUT_VARCHAR(string P_STRING,ref string P_OUT) RPCFUNC
Execute this script
uo_trans l_transaction
string ls_outparam
l_transaction = CREATE uo_trans
// Profile ODBC_ORA
l_transaction.DBMS = "ODBC"
l_transaction.AutoCommit = False
l_transaction.DBParm = "ConnectString='DSN=ODBC_ORA;UID=system;PWD=<xxxxxx>'"
connect using l_transaction;
ls_outparam = space (30)
l_transaction.testinout_varchar( sle_1.text, ls_outparam)
messagebox("OUT parameter", ls_outparam)
disconnect using l_transaction;
DESTROY l_transaction

Feature NUMAP was called with incorrect parameter value PME15

hi
i am getting following error while running transaction pb10.
Feature NUMAP was called with incorrect parameter value PME15
please help me out.
regards
archana

this might be occur in case there is mismatch of the fields of decision being used in feature maintenance.
check the feature and the return value , wether the return value is correct or not
goto PE03->NUMAP check the return value and check wether the return was configured in number ranges
eg: if the return value is 01 go to your config and check the number range has been set for "01"
you gave return value as "01" and the number range has not been set in configuaration for "01" this kind of error s may occur.
Edited by: Piscian . on Jul 18, 2011 11:54 AM

Can't get the correct return value ?

Hi,
I'am using JDBC/ODBC to connect to a MS SQL Server 7 database. I run a stored procedure which updates a table. An update trigger however may rollback the entire transaction and issue a RAISERROR. A return value should be returned after this.
However, in my servlet, I always retrieve the return value 1 (whether the transaction was rolled back or committed). What am I doing wrong ?
Forgive me, all you experts out there, I am a beginner ...

A RAISERROR should produce an exception. Checking the return value shouldn't matter nor be possible.
What error number is being used for the RAISERROR? I tried different numbers and ended up using the standard 16. Is the trigger returning immediately following the RAISERROR? I remember problems with that, the stored proc would continue if I didn't.

Unable to capture return values in web services api

At the time of login to web services if my server is down ,
it returns following error :
java.lang.StringIndexOutOfBoundsException: String index out of range: -1
        at java.lang.String.substring(String.java:1438)
        at java.lang.String.substring(String.java:1411)
I want to capture this error so that i can try another server to login. how do i capture this error
Another place where i want to capture the return Value is when i look for a report on the server
rh = boBIPlatform.get("path://InfoObjects/Root Folder/"src_folder"/" + reportName +
                           "@SI_SCHEDULEINFO,SI_PROCESSINFO" ,oGetOptions);
oInfoObjects = rh.getInfoObjects();
CrystalReport = (CrystalReport)oInfoObjects.getInfoObject(0);
Here if the report is not there on the server , it returns a null handler exception.
but if i try catching it by checking my responsehandler is null like rh == null it does not catch it.
Any help will be appreciated
thanks
Rakesh Gupta

Ted : i have two cases
1)   server = server_st.nextToken();
    providerURL = "http://"server"/dswsbobje/services";
    sessConnURL = new URL(providerURL + "/session");
   Connection boConnection = new Connection(sessConnURL);
   Session boSession = new Session(boConnection);
EnterpriseCredential boEnterpriseCredential = new    EnterpriseCredential();
              boEnterpriseCredential.setLogin(userid);
boEnterpriseCredential.setPassword(pwd);
boEnterpriseCredential.setAuthType(auth);
SessionInfo boSI = boSession.login(boEnterpriseCredential);
I have got a list of servers running web servcies stored in my tokens. when i pass the first server name say " test:8080" and that server is down , i want to catch somewhere in the code above that it did not get the connection so that i can loop back and try with the second server say test1:8080
This is for failover purposes.
at present when i was trying to capture return value of boSI it breaks giving the error
java.lang.StringIndexOutOfBoundsException: String index out of range: -1
at java.lang.String.substring(String.java:1438)
at java.lang.String.substring(String.java:1411)
2nd case :
I am geeting reports from the server and scheduling them:
i run the following code which works fine if reports is there
rh = boBIPlatform.get("path://InfoObjects/Root Folder/"src_folder"/" + reportName +
"@SI_SCHEDULEINFO,SI_PROCESSINFO" ,oGetOptions);
oInfoObjects = rh.getInfoObjects();
CrystalReport = (CrystalReport)oInfoObjects.getInfoObject(0);
Here if the report is not there on the server then i should be able to catch from the response handle rh that it has got a null value.
but rh does not return a null value
the code ultimately throws a null handle at the following line
CrystalReport = (CrystalReport)oInfoObjects.getInfoObject(0);
i am not able to catch the null value there also.
hope you got my issue.

Multiple return values (Bug-ID 4222792)

I had exactly the same request for the same 3 reasons: strong type safety and code correctness verification at compile-time, code readability and ease of mantenance, performance.
Here is what Sun replied to me:
Autoboxing and varargs are provided as part of
JSRs 14 and 201
http://jcp.org/en/jsr/detail?id=14
http://jcp.org/en/jsr/detail?id=201
See also:
http://forum.java.sun.com/forum.jsp?forum=316
http://developer.java.sun.com/developer/earlyAccess/adding_generics/index.html
Multiple return values is covered by Bug-ID 4222792
Typically this is done by returning an array.
http://developer.java.sun.com/developer/bugParade/bugs/4222792.html
That's exactly the problem: we dynamically create instances of array objects that would better fit well within the operand stack without stressing the garbage collector with temporary Array object instances (and with their backing store: 2 separate allocations that need to be recycled when it is clearly a pollution that the operand stack would clean up more efficiently)
If you would like to engage in a discussion with the Java Language developers, the Generics forum would be a better place:
http://forum.java.sun.com/forum.jsp?forum=316
I know that (my report was already refering to the JSR for language extension) Generics is not what I was refering to (even if a generic could handle multiple return values, it would still be an allocated Object
instance to pack them, i.e. just less convenient than using a static class for type safety.
The most common case of multiple return values involve values that have known static datatypes and that should be checked with strong typesafety.
The simple case that involves returning two ints then will require at least two object instances and will not solve the garbage collection overhead.
Using a array of variable objects is exactly similar, except that it requires two instances for the components and one instance for the generic array container. Using extra method parameters with Integer, Byte, ... boxing objects is more efficient, but for now the only practical solution (which causes the least pollution in the VM allocator and garbage collector) is to use a custom class to store the return values in a single instance.
This is not natural, and needlessly complexifies many interfaces.
So to avoid this pollution, some solutions are used such as packing two ints into a long and returning a long, depacking the long after return (not quite clean but still much faster at run-time for methods that need to be used with high frequencies within the application. In some case, the only way to cut down the overhead is to inline methods within the caller code, and this does not help code maintenance by splitting the implementation into small methods (something that C++ can do very easily, both because it supports native types parameters by reference, and because it also supports inline methods).
Finally, suppose we don't want to use tricky code, difficult to maintain, then we'll have to use boxing Object types to allow passing arguments by reference. Shamely boxed native types cannot be allocated on the operand stack as local variables, so we need to instanciate these local variables before call, and we loose the capacity to track the cases where these local variables are not really initialized by an effective call to the method that will assign them. This does not help debugging, and is against the concept of a strongly typed language like Java should be:
Java makes lots of efforts to track uninitialized variables, but has no way to determine if an already instanciated Object instance refered in a local variable has effectively received an effective assignment because only the instanciation is kept. A typical code will then need to be written like this:
Integer a = null;
Integer b = null;
if (some condition) {
//call.method(a, b, 0, 1, "dummy input arg");
// the method is supposed to have assigned a value to a and b,
// but can't if a and b have not been instanciated, so we perform:
call.method(a = new Integer(), b = new Integer(), 0, 1, "dummy input
arg");
// we must suppose that the method has modified (not initialized!)
the value
// of a and b instances.
now.use(a.value(), b.value())
// are we sure here that a and b have received a value????
// the code may be detected at run-time (a null exception)
// or completely undetected (the method() above was called but it
// forgot to assign a value to its referenced objects a and b, in which
// case we are calling in fact: now.use(0, 0); with the default values
// or a and b, assigned when they were instanciated)
Very tricky... Hard to debug. It would be much simpler if we just used:
int a;
int b;
if (some condition) {
(a, b) = call.method(0, 1, "dummy input arg");
now.use(a, b);
The compiler would immediately detect the case where a and b are in fact not always initialized (possible use bere initialization), and the first invoked call.method() would not have to check if its arguments are not null, it would not compile if it forgets to return two values in some code path...
There's no need to provide extra boxing objects in the source as well as at run-time, and there's no stress added to the VM allocator or garbage collector simply because return values are only allocated on the perand stack by the caller, directly instanciated within the callee which MUST (checked at compile-time) create such instances by using the return statement to instanciate them, and the caller now just needs to use directly the variables which were referenced before call (here a and b). Clean and mean. And it allows strong typechecking as well (so this is a real help for programmers.
Note that the signature of the method() above is:
class call {
(int, int) method(int, int, String) { ... }
id est:
class "call", member name "method", member type "(IILjava.lang.string;)II"
This last signature means that the method can only be called by returning the value into a pair of variables of type int, or using the return value as a pair of actual arguments for another method call such as:
call.method(call.method("dummy input arg"), "other dummy input arg")
This is strongly typed and convenient to write and debug and very efficient at run-time...

Can anyone give me some real-world examples where
multiple return values aren't better captured in a
class that logically groups those values? I can of
course give hundreds of examples for why it's better
to capture method arguments as multiple values instead
of as one "logical object", but whenever I've hankered
for multiple return values, I end up rethinking my
strategy and rewriting my code to be better Object
Oriented.I'd personally say you're usually right. There's almost always a O-O way of avoiding the situation.
Sometimes though, you really do just want to return "two ints" from a function. There's no logical object you can think of to put them in. So you end up polluting the namespace:
public class MyUsefulClass {
public TwoInts calculateSomething(int a, int b, int c) {
public static class TwoInts {
    //now, do I use two public int fields here, making it
    //in essence a struct?
   //or do I make my two ints private & final, which
   //requires a constructor & two getters?
//and while I'm at it, is it worth implementing
//equals(), how about hashCode()? clone()?
//readResolve() ?
}The answer to most of the questions for something as simple as "TwoInts" is usually "no: its not worth implementing those methods", but I still have to think about them.
More to the point, the TwoInts class looks so ugly polluting the top level namespace like that, MyUsefulClass.TwoInts is public, that I don't think I've ever actually created that class. I always find some way to avoid it, even if the workaround is just as ugly.
For myself, I'd like to see some simple pass-by-value "Tuple" type. My fear is it'd be abused as a way for lazy programmers to avoid creating objects when they should have a logical type for readability & maintainability.
Anyone who has maintained code where someone has passed in all their arguments as (mutable!) Maps, Collections and/or Arrays and "returned" values by mutating those structures knows what a nightmare it can be. Which I suppose is an argument that cuts both ways: on the one hand you can say: "why add Tuples which would be another easy thing to abuse", on the other: "why not add Tuples, given Arrays and the Collections framework already allow bad programmers to produce unmainable mush. One more feature isn't going to make a difference either way".
Ho hum.

Unable to see function return values in Visual Studio 2013 debugger

Hi!
I can't see function return values in
Microsoft Visual Studio Ultimate 2013
Version 12.0.31101.00 Update 4
Microsoft .NET Framework
Version 4.5.51650
Installed Version: Ultimate<o:p></o:p>
as described in http://blogs.msdn.com/b/visualstudioalm/archive/2013/06/27/seeing-function-return-values-in-the-debugger-in-visual-studio-2013.aspx
So what can I do to get this functionality back?
MsdnMezzo

Hi MsdnMezzo,
Reference:
http://blogs.msdn.com/b/visualstudioalm/archive/2013/06/27/seeing-function-return-values-in-the-debugger-in-visual-studio-2013.aspx
If use the same sample in the above blog provided by you, how about the result? Could you debug it with the same steps? I could debug it in my side using the VS2013.
So to make sure that whether it is your VS IDE issue, please debug it with this sample, if it works well, I doubt that we would think about your specific project and the debugging steps.
If so, to really repro this issue, could you share us a sample with one drive? You could upload your project to one drive and share us the downloaded link in your new reply, I will download and repro this issue in my side.
Best Regards,
Jack
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Best way to use return values in a webservices

Hi all,
Scenario: We have three web services. What is the best way to do this acitivity or is it possible?
webservice1
webservice2
webservice3
Call invoke webservice1 & 2 (they need to their work do be done parallely and will return a value eg "string")and call webservices3 with input values as the returned value from webservice 1 & 2.
Thanks,
Shashi
Edited by: Shashi_sr on Sep 17, 2010 1:46 PM

Hi Shashi,
The way to achieve your desired functionality is as follows:
Create a flow activity, and within that flow activity, you will call web services (using an invoke activity) webservice1 and webservice2.
After the flow activity, you will then use another invoke activity to call the 3rd webservice using the output given by the first 2 webservices.

How to handle return values in AppleScript

Warning: AppleScript newbie on the loose without adult supervision.
I have an Omnis Studio app that calls an AppleScript that in turn invokes a couple of shell commands. As an aside, I don't believe Omnis Studio can invoke a shell script directly without other complications.
What I would like to do is capture the return code and/or any stdout from the shell commands in the AppleScript, then pass that result out as a return value from the AppleScript.
Q1. How does one hold the return values, exit code, stdout, etc. of a shell script in AppleScript?
Q2. How do I tell AppleScript to pass the results back to the calling routine?
Examples, links to documentation, etc, will be gratefully accepted.

There is a whole forum for just Applescript here:
http://discussions.apple.com/forum.jspa?forumID=724

Incorrect initial value for char 0FISCYEAR in i_t_range in DTP filter prog

Gurus
I need your help , I have searched all the threads but could not find anything which can help me resolve this issue.
I have a filter in DTP as a routine to get the year from system date.
The program is correct for syntex but when I trigger the DTP I am getting the following message , not sure what needs to be added to my programe.
Incorrect initial value for characteristic 0FISCYEAR in i_t_range
Message no. DBMAN889
appreciate any help I can get to reoslve this ASAP.
Thanks in advance

Hi
Pleae check if you have initialised with a NULL value . "blank/null" is indeed not a valid characteristic value for fiscal period. Fisc.per is of type NUMC which means all characters have to be numerical. The initial value should be "0000000" .
Thanks,
Rajesh.
Please provide points to answers if you find them helpful

Incorrect initial value for characteristic 0fiscyear in i_t_range

Hi,
While extracting the data from the source DSO to Target I got an error message like '' Incorrect initial value for characteristic 0fiscyear in i_t_range".
what is the step should i take to resolve this?
Thanks in Advance.

Gurus
I have the same problem with my ABAP code written in DTP filter.
Can anyone please help what needs to be done , I am getting this error when I try to load the data to cube.

ODBC SQLRemoveDriver: Incorrect return value?

Similar Messages

Maybe you are looking for