Odd alert sound from Macbook Pro Retina

Hi, my 13-in MacBook Pro Retina is late 2013 version installed with OS X Mavericks 10.9.4.
Recently, every now and then there will be a "ding" tone that sounds.
I have checked. I do not have any alerts on nor is it the incoming email alert.
I also could not find this sound under the sound alerts menu.
Anyone can be of help?

sorry to hear about your problems. Try running Audio MIDI, see what's it's set it for both the line out/digital out. Holding down the Alt Key (next to the space bar) gets you a list of all the input and output devices on your macbook pro. Also, see if accessibility is turned on under system preferences.  Other than that, I can't say. if you have wifi problems, see if there's an update for it (airport?) or see if you can change  Wi-ifi channels on your printer
well, I tried anyways
JB

Similar Messages

  • Noise from MacBook Pro Retina 13 late 2013

    Hi,
    I wonder if noise from my MacBook Pro Retina 13 late 2013 is normal. I can hear it only in quiet room (first time I heard it in the middle of the night).  It’s very quiet noise. I don't know what to compare this noise. For me it’s sounds like clicking the spring. I can hear it when scrolling the webpage by trackpad, start mission control by gesture (or F3 key), changing the full screen apps by gesture or when minimize Safari or other apps. I think it depends on the graphic system work. It’s a little lauder when I use 1680x1050 scaled resolution than use 'best for display' resolution. I think the noise occurs when graphic system do some operation. Is it possible?
    Today I was in Authorized Service Provider but technician heard nothing. There I can't hear this noise too, because this noise is very quiet and there is not total silence. Diagnostic tools show that everything is ok. But I still hear it in total quiet room. I tried to record this noise by iPhone but it can't do that.
    Can you do me a favor and check this on your MacBook? Sit in totally quiet room, please. Set the scaled resolution 1680x1050 then bring ear closer to the keyboard and scroll a webpage (which have a lot of graphics) by gesture on the trackpad, start mission control or open notification center. Can you hear then any noise? Please listen carefully, because this is very quiet noise.
    I’ll be very gratefully for your help. I wonder if only my MacBook making this noises or all MacBook Retina late 2013 making this.
    Regards,
    Mateusz

    Jon Bo wrote:
    Hi Mateusz,
    I have the same issue on my new MBP retina 13 late 2013. It's not disturbing because I can hear it in only very quiet room and only if the content of the screen is changing (like scrolling web pages). It reminds me the sound of old 3'5'' hard discs. I first thought it's a hdd, but then realised my mac has only SSD.
    I think it's a noise from the voltage regulators. This is normal for very high speed high-voltage signals.
    But any way, MBP 13 late 2013 is the best laptop I ever saw
    It's just silent and cool like an ipad. I wonder if it has a rotating cooler at all.
    Jon Bo
    Thank you Jon Bo for your response. I agree with you. This noise is something like electronic noise, and it is related to the graphics card.
    The rMBP 13 late 2013 works without any noise other then situations I’ve described above. The noise is so quiet that I can't hear it when e.g. external HDD working in the same room.
    Mateusz

  • Super SLOOOOW file transfer from MacBook Pro Retina to Time Capsule over WiFi - why?

    So I have been having a search around and it seems like the advice for folks complaining about ludicrously slow wifi transfers from their Mac to their Time Capsule is... to do it wired.
    As you may know, the MacBook Pro Retina does not have a cable Ethernet port. So I have to buy a Thunderbolt-to-Ethernet adaptor (and a cable if I don't already have one) just to perform this basic task? Seems hard to believe.
    MacBook wifi is showing as connected via 802.11n to the Time Capsule and the link speed is showing 217 Mbps in Network Utility.
    So why is it so slow?

    Thank you, LaPastenague - very complete answer!
    How is the old NAS connected to the TC?
    What actual speed are you getting?
    It is important that when you select an option you stop other options from interferring.. ie.. turn off wireless when you do ethernet.
    First, I had the NAS connected to the laptop (Dell XPS M1710, Win7 - (yeah, I know, but it does the job, still)) via USB, which generated about 900KB/S r/w speed,
    then I tried connecting it via LAN to TC, but didn't succeed in getting TC recognize the drive,
    lastly, I connected it via the USB port directly to the TC, and got ~900KB/S r/w speeds again.
    In all scenarios, the laptop was connected via LAN as well (TC's WiFi was not disabled, though).
    Then I read the above thread and tried finding DHCP settings. Found them in the "internet settings" in the airport utility, but not in the "dive settings", so I didn't know what to change there.
    Strangely, the only thing that I changed was the TC-name, taking away a hyphen and a space (from "myname's TC" to "mynamesTC"), which resulted in faster r/w speeds, going from the 900KB/S to 1.5MB/S (still not what I expected).
    Also that any copying of files will be a loop, old NAS--Computer.. Computer--TC
    Got it. Tried to provide a faster connection by directly connecting old NAS to TC via USB, but makes sense.
    Each connection is just as impportant as the other. Plus you can see the computer must handle every packet in a double hop tx, rx tx rx for each one. So using gigabit all the way is vital.
    Will try again connecting old NAS to TC via GB-LAN, and have it recognize it, and provide and update here. 
    This is best done in full isolation from internet.. just setup so you can do the copy overnight.
    I was planning on doing several actions of moving files in a session of re-organizing, and am not really keen on waiting 4-6hrs between each step. The old NAS shall host all videos later, as it is recognized by the PS3 when connected via USB, while the TC shall host all photos and music, which I am rather accessing from the laptop's itunes.
    And also to realise lots of very small files can copy extremely slowly.. no matter how fast the connections are.. it is heaps of small files that cause copying to take forever because files are written to the disk and then file allocation tables are filled in for every one. It is why a backup is much faster as files are compressed into single large file. Or like TM using 8KB bands where the file ends are handled differently to normal disk.
    That will have added to the slow-ness of the session last night, as I was copying 25GB of photos which took 6hrs (***). So that would have been faster if I compressed them to .zip before moving? (not because it reduces size, as it barely does, but becuase it puts many small files into one big one?)
    Just moved a 164MB vid from laptop to old NAS (which is still connected to TCs USB port, while laptop to TC via WiFi): result: 1minute40secs @ 1.70MB/S.
    Then moved same vis from laptop to TC: 1minute55secs @ 1.80MB/S (gaining write speed slower that old NAS, therefore taking longer despite higher final speed).
    So, is there any further improvement / setting that I could change (DHCP / NAT) to get to higher r/w speeds, like the 6.75MB/S quoted above?
    Thank you again! MFP

  • How to transfer contacts from MacBook Pro Retina to old MacBook Pro running 10.5.8?

    How do I transfer my latest updated contacts from my MacBook Pro Retina running 10.9.1 which uses the cloud to my old Macbook Pro running 10.5.8 which is not in the cloud?

    Thank you very much, Linc, for your suggestion.  I should have mentioned one other thing.  The reason I want to do this is that I use an old phone and, after I upgraded to Mavericks, Missing Sync no longer worked with my MacBook Pro Retina - so my address book in my phone is getting out of date.  Because my phone is old (it's a Palm Centro), they apparently will not likely update their software for this phone.  So I was thinking I could sync my phone with my old MacBook Pro running 10.5.8 if I could regularly get that old address book to mirror contacts in my new MacBook Pro.  You said I could open the contacts in the old MacBook by double-clicking the vCard file. But will that action put them into the old address book on the old Mac so that I could then sync the phone to it? I really need to overwrite the address book in the old Mac with the info that I am bringing over from the new MacBook.
    I'd be grateful if you could tell me whether what I want to do is doable.  This old phone works perfectly well and I don't need a new phone with a data plan that I would pay for but never use.
    Thanks!
    Note - I accidentally indicated that my response solved my question.  I clicked the wrong box.  Linc is the one who solved the problem.

  • Clicking sound in MacBook Pro Retina

    I'm trying to work out why my new MacBook Pro 15 inch retina laptop is making a clicking sound.  It sounds like it's comming from the top right hand side of the keyboard.  Other forum threads have suggested that this sound is related to a Sudden Motion Sensor but my laptop has a SSD so according to apple does not have a SMS. 
    I am starting to think that it is a noise related to switching between onboard and discrete graphics?  It occurs seemingly at random but the most common time is when waking from sleep.  I have also noticed that when it fails to wake from sleep - not a good thing to have happen on a brand new computer - it does not make the sound.
    There isn't an apple store within 800km of me so it's a little difficult to get help from a genius with this.

    I have had a new C2D macbook for a couple of months and over the last few days have noticed the "kurik" clicking sound. As always you can be assured that a quick search of discussions will turn up threads relating to your concern. I know that this is an old thread but thought it appropriate to post here.
    Initially, I was concerned as this clicking was reminiscent of the sound made by dying HD's in several iPods I have owned. However, it is not persistent and if I watch activity monitor each click is usually associated with a short burst of writing activity. If I sit and let the macbook idle, the clicking becomes less frequent. Disk utility showed that the SMART status was 'verifed' and not 'failing.' I would go along with the notion that this is disk management going on in the background - perhaps spotlight or some other kernel task.
    As to why I have just noticed it after several weeks, it may be that I have been in quieter environments and the clicking have always been there. As I am writing, the clicking has disappeared. Nonetheless, I will ensure that my home folder and my added applications are backed-up frequently, just in case.
    Has anyone actually reported a HDD failure in new macbooks?
    (Clicking has now returned)
    MacBook 2GHz Intel Core 2 Duo   Mac OS X (10.4.8)   G4 MDD 1.25GHz

  • Random tick sound from MacBook Pro (noticed it since updating to 10.6)

    Hi,
    I have the 2.4Ghz Unibody MacBook Pro 15" (Early 2009) with the removable battery.
    I went through a clean install of Snow Leopard, up to date with all the updates (10.6.1). Ever since I have been hearing random ticks. At first I thought it was the hard drive. But it's too loud for the hard drive, and it sounds like its coming from the right speaker.
    A break down of the possibilities:
    - Hard Drive
    - Left Speaker
    - Bug in Snow Leopard
    - Fan
    What do you guys think? Anyone else experiencing this?

    If you had a cloned copy of your Leopard (not Snow Leopard) disk (everyone should have a backup of their disk on an external drive) you could boot from it. This would rule in or out the OS as the culprit.
    If you do ot have said copy (for shame, for shame) maybe you can boot with the install DVD and determine the same thing.
    I have the mid '09 15". I can remove the belly pan and see the entire fan. Can you do this with your model to determine if the fan is making the noise? Can you install some fan control software that will allow you to speed the fan up and thus determine if the fan is the noisemaker?
    Will turning the speaker audio OFF have any affect on the noise? Will putting a piece of cardboard over the speaker grill affect the noise?

  • Sound on Macbook Pro Retina is faulty, plays at lower pitch than it should

    Retina, 13-inch, Late 2013
    Memory  16 GB 1600 MHz DDR3
    Graphics  Intel Iris
    Software  OS X 10.9.4
    I turned on my mac this morning and the mac logo chime was a lower pitch than usual. I thought it might have just been me then I played a track on itunes and figured that this was the same of everything. Every sound that comes out of the speakers is the same(an octave lower)
    I have already reset the PRAM and the SMC
    I have spoken to two Applecare instant chat staff and they are clueless.
    I would really like to get this sorted without going to an Apple store because, as per usual, I cannot get a booking.
    What now?? please help
    MacBook Pro with Retina display, OS X Mavericks (10.9.2)

    thanks for the reply. I ran the AHT by rebooting and holding D. While a ran the test there was no fan noise. The test found no probems. After restart the fans speed up again. Since my last post I've installed the iStat widget. My temperature (F) and fan speed readout is as follows:
    HD: Macintosh... 112
    CPU/ Heatsink     122
    Airport Card          121
    Enclosure Base     92
    Enclosure Base 2     92
    Enclosure Base 3     85
    GPU                       140
    GPU Diode               155
    Right Fan          ~5500 RPM
    Left Fan               ~5900 RPM

  • No sound from Macbook Pro after restart or sleep

    I know there are a lot of threads on this type of issue, but I haven't found a way to solve my problem.
    My computer:
    Late 2008 MBP 15" OSX 10.9.5
    Whenever I shutdown or sleep the computer, the sound does not work when I start it up or wake it up. The startup sound does not play, and the audio controls are not greyed out. Audio does not work through headphones either. Plugging in and unplugging headphones does not solve the problem.
    Sometimes a PRAM reset will solve the problem, and an SMC reset always brings the audio back, but only until I shut it down or put it to sleep again.
    Any help in finding a permanent solution to this problem would be greatly appreciated.
    Thank you!

    Hello CoDean,
    Continue your troubleshooting with the article below to assist with the issue of not sound on your MacBook Pro. Look at the headphone jack to see if there is a red light coming from there as well as looking in System Preferences > Sound to see if the output is stuck on digital out. 
    Troubleshooting issues with no audio from built-in speakers on Macs
    http://support.apple.com/en-us/HT203186
    Take care,
    -Norm G. 

  • Weird sound from MacBook Pro 2011

    I have a weird sound that occasionally occurs from my Late 2011 13" MacBook Pro. The sound comes from the left side of the base, towards the hinge. The timing is random, usually when sitting by itself idle with the lid open. It has occured when the charging cable is both connected and disconnected. Performing a restart does not cause it to stop, it will continue thru the restart. Shutting down completely does shut it up, but it'll likely appear shortly after booting up. Closing the lid of the MBP will shut up the sound, and if left closed for a couple hours, the sound doesn't appear for awhile.
    The sound itself is pretty loud, and can easily drown out my TV when it kicks in. I don't think it's the fan, as I've heard the fan on full tilt and it's still quiet, unlike this noise I am referring to. Plus, the fan is located in the center against the hinge, not on the left where the noise is coming from. I tried resetting the SMC and NVRAM, no luck. I did record the sound with my cell phone, here is a video of it:
    http://www.youtube.com/watch?v=OgutF9bZilI
    If anyone has an idea of what is causing this sound, please help. Thank you.

    Does the sound, or it's basis, interfere with operation of the MBP in any way?  When the lid is closed it is in sleep mode so one would expect the sound to stop then.
    Best thing might be a visit to the Apple store genius bar to have the techs test it.

  • Odd "Pong" Noise from MacBook Pro

    My new MacBook Pro makes a very strange "pong" noise extremely sporadically. The sound seems to be coming from just next to the trackpad on the right-hand side of the machine. By way of description, I would say it sounds like a tennis ball being hit. It's very faint, and not that big of a problem. I'm just curious as to what is causing it and if it can be fixed.
    Searching the 'net. I only found one other reference to the sound http://forums.appleinsider.com/archive/index.php/t-69355.html . Anyone have any ideas?

    My fix worked. It's funny--there are a lot of complaints about this noise across the net and a lot of people saying the MacBook is the noisiest computer around because of this pong. But I never would have heard the noise on my old Toshiba. It's because the MacBook Pro is nearly silent that I could hear this faint table tennis game going on under the hood.

  • Stream sound from Macbook Pro to another device?

    So my headphone jack just half-died on me. I get full sound from the right ear, but the left one has little to no sound coming through. I've had headphone jack issues in the past with my macbook pro and they said I needed to replace the entire motherboard last time which was extremely expensive. My warranty has run out so doing that again would not be feasible, yet I really need the headphone jack to be working since much of my work is video/audio intensive. Is there any way I could stream audio to another device like my phone or something via bluetooth and plug headphones into that to get full sound in both ears? Or is there a fix to this issue that I don't know about? Any tips or advice would be greatly appreciated!
    Macbook Pro 13-inch (early 2010)
    2.4 GHz Intel Core 2 Duo
    10 GB 1067 MHz DDR3
    OS X Mountain Lion (10.8.5)

    You can stream audio via airtunes to an Airport express which has an analogue ouput jack, but it's line level and doesn't have a volume control, but you can use it as the source for a hifi.  You can get third party powered speakers which receive airtunes.  You can stream audio and video to an Apple TV but it only has an optical Tosslink audio out and audio and video out via hdmi.
    You can also get sound out via USB to a an offboard D/A converter which in most cases would be line-level, though you could likely find asomething with a headphone output with a volume control.
    If you look up the specs on your machine you might also find you have digital audio out via tosslink and the headphone jack which is misbehaving as the ports are combined on some models.  Then there is the mini display port which can in some cases output both sound and audio and you can get a long display port to hdmi cable a lot cheaper than an ATV.
    But, while the headphone jack replacement involves a motherboard swap, in reality, what might have happened is that a solder joint for the socket on the motherbord has failed and simply resoldering the joint would fix the issue.  If the internals of the socket like a contact breaking or being damaged is the problem then the MB would likely need replacing given the cost of labour for a tech to source and replace the whole socket.

  • No sound from MacBook Pro

    Last week, I tried to play music through my MacBook Pro. No sound is coming from either my internal speakers OR my headphone jack. I feel like I read a million threads but none of them seem to apply to my issue. In my Settings>Sound it still displays my "Internal Speakers - Built-in" as the sound output. When I try to adjust the volume, the icon appears normally on the screen. There is no line through it, or simply doesnt work, as other users have posted. I have no red light shining from my headphone jack. Headphones also do not work. Everything (software Wise) seems to be set up exactly as it should be, but still no sound! Could this be a hardware issue? From the time my sound worked to when it stopped working my MBP was just sitting on my desk! Not sure what else to try. Any help would be greatly appreciated.

    Asher,
    Sorry for the delay in response. Thankfully, a tech person with whom I work discovered the update, so I am not totally sure. I think that she simply switched my software update schedule to every day (instead of weekly), and the firmware was simply part of an update package that was waiting for me. Sorry that this isn't too helpful. I'll try harder to remember to ask her how exactly she accessed the update.
    Kindly,
    LevelPaths

  • How to output sound from MacBook Pro to stereo receiver/amplifier?

    Does anyone here know what I would need to buy to send audio from my MacBook Pro to an external integrated stereo amplifier? I'm sure there's something. I'd like best quality so if you know of a USB solution please let me know.

    Typo above, 'headphone port' not 'headphone post.'
    Glad to help, and thanks for the !
    FYI, the mic port is the same, so if you have a need to get digital audio into your MBP, the mic port will do that as well as analog.
    The headphone port actually does triple-duty, in that it's both analog and digital out, and with the longer plug found on the iPhone headset, the headphone port can also function as an analog input.

  • No sound from MacBook Pro under Lion OS X after the automatic logout.

    When I go idle, my MacBook Pro does the typical log out....& prompts me for my password to get back in. I have sound previous to this, but, when I log back in, all the sound is gone. This frequently started happening with Internet videos (youtube) / flash getting no sound, but now it's the entire system. In order to get sound, I have to shut down my entire notebook and start back up.
    When I click the sound effects in the System Preferences > Sound .... They do work.
    Any solution to this sound issue?
    If you need more information please ask.

    Hi. Same here. I haven't try the PRAM reset, but rebooting the system works, with the obvius corresponding time consumption .
    The system has two user accounts that are running simultaneously, my wife’s with Chrome, VLC, and other image and video tools (no professional ones). On my profile I have chrome, vlc, jdownloader, mail, mkvtools and stuff like that.
    I first thought that one app was blocking the access to the sound card to the other apps, but if I turn off all of them and log out one user, the problem persists. So I end up rebooting the system…
    Any help will be appreciated

  • How do I clear cache from Macbook Pro Retina?

    How do I cleal the cache on my Macbook Pro with Retina display?  Can this be done without purchasing a program?

    If the above suggestion doesn't do enough, see #12 here, OnyX is free.
    ..Step by Step to fix your Mac
    See my other User Tips here
    https://discussions.apple.com/community/notebooks/macbook_pro?view=documents#/?p er_page=50

Maybe you are looking for

  • In which tables can I find the sales order item texts?

    Experts, In SD, we have texts on sales order item level. These texts can be filled manually or automatically via access sequences. My question is very simple: in which table can I find these texts? I want to extract them for a big number of sales ord

  • Data load buffer [1] does not exist error when loading cube

    Hello I'm trying to load data using Essbase Studio. Everything was working fine, the load used to occur very quickly. After updating the SQL query to load a larger period ( 5 years instead of 2 ), the load fails after exactly 10 minutes ! I'm wonderi

  • Good old S40 signaland battery bars

    I hate something on all new S40 phones,its the way the signal bars and battery capacity is displayed on the phone,(both clustered on the left hand side).Hope Nokia will revert back to earlier style like that of 6230 etc.

  • CS5 Print Booklet is not generating a booklet. How can I work around this?

    I have updated to CS5 and now when I use  "print Booklet" for my 12 page inDesign document, no pdf is produced. In CS3, the pdf appeared with no problem, ready to take to the printer, all spreads ready for saddle stitch printing on ledger paper. I ca

  • Server is unavailable error while resetting password

    I am trying to reset a password on my MAC Machine but i am getting an error saying "Server is Unavailable" when i click change password. What could be the reason?