Odd Alert While Editing a Post

During the last several days I've seen an odd alert some times when I edit a post. I'll post a message, then if I have second thoughts about the details of my post, I'll edit it. When I'm done I click on the poorly-labeled "Edit Message" button. A few times this has resulted in a pop-up box that states this:
http://discussions.apple.com
Are you sure you want to leave this page?
Your message draft has not been saved.
Click OK to continue, or Cancel to stay on this page.
If I click on "OK" my change is posted correctly.

For me, at least, it continues to happen when editing a post and not manually saving it before hitting the Edit button. Before the recent site maintenance, I believe saving was happening automatically, whether from the original post or from editing. The original post does still appear to be saved automatically as soon as one hits the Post button. This behavior seems to be happening only from Edit.
FYI using Firefox 3.5.8
Interesting: just now edited this post. Didn't get the alert when hitting Edit, and Save Now wasn't dimmed at the moment of hitting the Edit button, but when I returned for another edit, I saw that it had been saved. I guess this is erratic behavior. I got the alert earlier when editing in a different forum; could it depend on the particular forum one is in? I would think the alert is set to happen only when leaving an unsaved post, so the automatic saving must be what is erratic.
In any case, it's really not a big deal.
Message was edited by: WZZZ

Similar Messages

Firefox 8 hangs and spins after multiple saves of a post while editing a Wordpress website

After upgrading to Firefox 8, on our Windows 7 - 64 bit laptop computers, the browser hangs and just spins and gets stuck after I click "Save Draft" a few times while editing a post for our Wordpress website. After that FF no longer works to access any webpage or other website. Only shutting down the computer and restarting fixes the problem. Adding additional virtual memory to the computer seemed to allow more saves of a post on the Wordpress site before the hang occurs, but it still occurs.
These problems do not seem to be occurring with our Windows Vista desktop computer (32 bit), even though it too is running Firefox 8.

I've done a bit more playing around with this. It seems running xmodmap ~/.Xmodmap does work, it's just very slow and CPU-hungry. Reducing my .Xmodmap file to include only the overrides (4 of them) allows it to complete in about a second.
However, it's still not being loaded on login, despite being in .xinitrc. In order to get my keybinds to work in a program, I need to open a terminal, run xmodmap manually, then execute whatever program I want them to work in.
I tried downgrading xf86-input-evdev but my keyboard no longer worked on boot, once the display manager appeared (and I couldn't switch TTYs with Ctrl+Shift+F*).
Last edited by dtomasiewicz (2012-11-02 16:43:21)

While editing a scanned pdf, Acrobat will not recognize the current font & change to very different font. How can I choose the font I want to match the current document?

While editing a scanned pdf, Acrobat will not recognize the current font & change to very different font. How can I choose the font I want to match the current document?

Thanks for answering. The version is XI.0.10. I just did the update yesterday hoping that I could now properly edit a scanned pdf document. Yes, it's happening on most all scanned documents. I followed your steps & found the list of fonts used in the document & then attempted to edit. The same occurs. When I type in a correction, I get an error alert... "the original font (in this case Fd 5805) is not available or can't be used in editing. Acrobat is using the font Minion Pro in its place."
When I select the text & right click as you suggested, my only choices are cut, copy, delete or select all, no "edit text".
I have no other options to choose another font. Thanks for any help you can direct my way.
Debbie
From: sukritd15 <[email protected]>
To: Deborah Karr <[email protected]>
Sent: Friday, February 13, 2015 5:35 AM
Subject: While editing a scanned pdf, Acrobat will not recognize the current font & change to very different font. How can I choose the font I want to match the current document?
While editing a scanned pdf, Acrobat will not recognize the current font & change to very different font. How can I choose the font I want to match the current document?
created by sukritd15 in Creating, Editing & Exporting PDFs - View the full discussionHi Deborah , I would like to know couple of things before I assist you further.1.Which version of Acrobat are you using ?2.Is it happening for all the scanned PDF' or any particular PDF? You can try these steps,Launch the scanned PDF >right click >Document Properties(from the drop down list) >Fonts(on the dialog box)>From here you will get the fonts used in that PDF . While editing the PDF ,select the text that are editing or typing in with the help of selection tool .After you select the text ,right click on the text and choose "edit text" from the drop down list .From there you will be able to choose the desired font . RegardsSukrit Dhingra If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7190881#7190881 and clicking ‘Correct’ below the answer Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7190881#7190881 To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following" Start a new discussion in Creating, Editing & Exporting PDFs by email or at Adobe Community For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

External TV Monitor use while editing HDV

I would like to use an external TV monitor to mirror my timeline while editing in HDV and I understand from reading past posts that I cannot do that without a
capture card such as the Blackmagic Decklink HD Pro (dual link) PCI-X. I am willing to purchase this card if it will work with my setup and JVC BR-HD50 deck. Is anyone out there working with this card and deck? I will appreciate any info that anyone can give me.
G5, Dual 2.0 Processors with PCI-X- FCP 5.0.4 - Toshiba HDTV 20 inch monitor
JVC HDV BR-HD50 Deck

You'd still capture via FireWire, but monitor externally using the capture card in the scenario you describe to work in HDV... It would also allow you to control the deck via it's RS-422 (better control than via FW) Also, with the right converters you could upconvert the HDV to uncompressed HD which works quite nicely if you have a fast enough array attached for this.
However there is a less expensive solution... check out http://www.matrox.com and look at the very soon to be released MXO product. I saw this in a pre release at NAB this year, and it looks like a really great product, and timely to say the least. Maybe will help Matrox come into the world of FCP again... and sort of live down the old RTMac debacle. But use's Apple's second port on your graphics card to convert the cinema desktop option in FCP to be Standard def or High def uncompressed to use with your monitor. All this in real time... without any latency that I could see.
My next article for the COW magazine is going to discuss the HDV workflow with FCP in fact, and discuss pros and cons of all the different solutions for editing and for monitoring/ upconversion /down conversion/ intermediate codec use etc... all of it...
Jerry

How to get rid of annoying tool tips while editing SQL files

I'm using Visual Studio 2013 to edit an .SQL file and I have attached the editor to a local SQL Server 2008 R2 database.
While editing the string that is passed to a sp_executesql procedure it keeps popping up a tool tip saying:
"Parameter help is not supported for extended stored procedures"
Generally I don't care about that and it is annoying because it keeps appearing over the top of the text I want to read. Is there any way to stop Visual Studio doing this?
a

Hi aptitude,
Thank you for posting in the MSDN forum.
>>I'm using Visual Studio 2013 to edit an .SQL file and I have attached the editor to a local SQL Server 2008 R2 database.
Could you share us more information about this issue? You said that you edit the .sql file, which kind of app did you create which would use the .SQL file? Whether it is related to the SQL Server database project or others?
If it is related to the SQL Server Database project, please post this issue to the SSDT forum:
https://social.msdn.microsoft.com/Forums/sqlserver/en-US/home?forum=ssdt
>>While editing the string that is passed to a sp_executesql procedure it keeps popping up a tool tip saying:"Parameter help is not supported for extended stored procedures".
Reference:
https://technet.microsoft.com/en-us/library/ms175170%28v=sql.105%29.aspx
https://msdn.microsoft.com/en-us/library/ms188001(v=sql.105).aspx
But if it is related to the SQL Server, to really repro this issue, and make sure that whether this warning is related to the SQL scrip or others, maybe you could select a better forum here:
https://social.msdn.microsoft.com/Forums/sqlserver/en-US/home?category=sqlserver
If I have misunderstood this issue, maybe you could share us a simple sample and the detailed steps in your new reply, so we could really repro this issue in our side.
In addition, I did some research about the warning message:
https://msdn.microsoft.com/en-us/library/ms173434.aspx?f=255&MSPPError=-2147217396
The IntelliSense functionality of the Database Engine Query Editor does not support all Transact-SQL syntax elements. Parameter help does not support the parameters in some objects, such as extended stored procedures. For more information, see
Transact-SQL Syntax Supported by IntelliSense.
In SQL Server, it seems that it is related to the IntelliSense, I'm not very sure that whether it is related to the IntelliSense of VS IDE, but generally we could enable or disable IntelliSense under TOOLS->Option->Text Editor in VS
IDE.
Maybe you could disable IntelliSense in VS IDE, and then check it again.
If I misunderstood this issue, please feel free to let me know.
Best Regards,
Jack
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Force Check Out For Infopath Form while editing in browser.

Hi,
Can Someone tell me How to Force Check Out for InfoPath form while editing in browser.
Any Help Would be more than Welcome.

Rohan,
Sorry but you have posted to a forum that deals exclusively with questions/issues about customizing and programming Microsoft Project, a planning and scheduling application. I suggest you delete this post and find a forum for InfoPath or the browser you
are using.
John

Error while doing transfer posting

Hi,
While doing transfer posting I am getting an error given below:
"Deficit of SL Bl.stock returns 10 SU : (material) (plant) (stor loc)"
Please help me in this regard.
Thanks in advance.
Sonal

Hi,
Please check once again. There is a deficit of stock in the storage location in the plant. I guess you are mentioning the incorrect s.loc in mb1b.
Also check if there is any return material in the storage loc.
Regards,
satyajit
Edited by: Satyajit Kumar on Dec 23, 2008 11:24 AM
Edited by: Satyajit Kumar on Dec 23, 2008 11:25 AM

Aperture-3 hangs and the system too, while editing in 100%

I am not sure about other people have the same issue,
Just wanted to explore if any of you have / had the same issue.
I use Macbook Pro 13" (i5 & 4GB RAM), Recently installed aperture-3 from mac store.
I usually shoot in RAW and do the rest with app-3.
In recent days, my aperture and my system hands while editing any RAW image, mostly while using brushes (for sharpening / polarization).
Coincidentally or not, it happened all the times when i have the pis in 100% zoom-in condition.
If you experienced similar issues please share and let know hoe you resolved it... Also requesting experts in this group to throw some light on this subject.
Thanks in advance
Munish

Hello munish,
I'd try some diagnostics first, before you reinstall.
Macbook Pro 13" (i5 & 4GB RAM)
I had the same setup as you - it worked great with Snowleopard, but as soon as I upgraded to Lion Aperture was running at a snail's pace and completely useless. I added 4 GB RAM and all was back to normal. Also, if your harddrive is very full, performance may go down. Keep at least 10% of your drive empty. How full is your disk right now?
To check if RAM might be an issue on your machine, start the Activity monitor (Applications -> Utilities) and look at the memory usage while Aperture is running. Don't run any other apps simultaniously, that are heavy on RAM, like Safari.
And run a hardware check: Using Apple Hardware Test: http://support.apple.com/kb/HT1509
If you cannot find a hardware problem - hopefully not! try the usual trouble shooting measures in turn, for corruption of some files in your Aperture Library may cause similar symptoms, see Aperture 3: Troubleshooting Basics: http://support.apple.com/kb/HT3805
If you want to reinstall Aperture as described in the post that Nilsemann pointed to - since you installed your Aperture from the AppStore - then you need to enter the following command in a Terminal window after cleaning the libraries before you reinstall Aperture:
Sudo pkgutil -forget com.apple.pkg.GarageBand
That will ensure that all recent update packages will be deactivated and you can update the newly installed installed Aperture.app again to the most recent version. You will be prompted for your admin password when you enter the command.
Regards
Léonie

Will we EVER be able to EDIT a post?

-----
This is the only Forum I've ever seen that prohibits its members from editing their posts. That's a real hardship as we have to add new posts when we just need to edit....makes for a messy and confusing thread. Is anyone here ever planning to do something about that? (come on....keep up with the times....)
-----

Sorry if you thought I was mean, it just sounded to me like you were expecting some kind of extended editing ability. As mentioned, there is a short period of time (OK, a really short period of time), with an icon added to the post during the editing time. Since the edit time is so short, your messages should be carefully though out, since there isn't time to change much. Sometimes i even wind up creating a message in a text editor so I can think about it for a while.
Once the editing period has elapsed, the only way to get the post edited is to ask one of the moderators - when you reach level 2, an additional link to report a message will appear, or you can post a request here where a higher level user can flag your message.

Error while editing a page in Oracle Composer

While editing a page on the remote server using Oracle Composer I am getting the following error:
Exception [EclipseLink-7060] (Eclipse Persistence Services - 2.1.2.v20101206-r8635): org.eclipse.persistence.exceptions.ValidationException
Exception Description: Cannot acquire data source [java:comp/env/jdbc/WebCenterDS].
Internal Exception: javax.naming.LinkException: [Root exception is javax.naming.NameNotFoundException: While trying to lookup 'jdbc.webcenter.CustomPortalDS' didn't find subcontext 'webcenter'. Resolved 'jdbc'; remaining name 'webcenter/CustomPortalDS']; Link Remaining Name: 'jdbc/webcenter/CustomPortalDS'
Exception Description: Cannot acquire data source [java:comp/env/jdbc/WebCenterDS].
Internal Exception: javax.naming.LinkException: [Root exception is javax.naming.NameNotFoundException: While trying to lookup 'jdbc.webcenter.CustomPortalDS' didn't find subcontext 'webcenter'. Resolved 'jdbc'; remaining name 'webcenter/CustomPortalDS']; Link Remaining Name: 'jdbc/webcenter/CustomPortalDS'
While trying to lookup 'jdbc.webcenter.CustomPortalDS' didn't find subcontext 'webcenter'. Resolved 'jdbc'
Any pointers would be helpful

Hi,
I think, Package ZBI_NEW is a custom development package: probably someone else already transported the application component hierarchy and assigned this package...try to change this. Chk with SE80 > package > ZBI_NEW,If it is not there,create it.
But the normal practice is change/Edit DSO in DEV-->Quality , then transport to Production.(SE80
In the drop down, look for Packages,below it type ZBI_* and hit Open.If you don't see ZBI_NEW, then ask BASIS to Create (DEV)and import that Package to QAS->Production)
Regards
CSM Reddy

VS2012 SSRS Project - Intellisense problem while editing dataset

Environment: VS2012 with SSDT, Reporting Services project
When editing the dataset query (which is T-SQL code) of any report and I try to type
table.field, when I reach the period (.) character Intellisense pops up with Equals & ReferenceEquals, and interferes with completing the
table.field statement.
This is while editing in: Datasets>Mydataset>Dataset Properties>Query>Expression
Its extremely annoying and unnecessary to have to correct the unhelpful and ignorant autocomplete of Intellisense.
Turning off Intellisense in Tools>Options>Text Editor>SQL Server Tools>Intellisense has no effect.
Is there a way to:
1) Inform Intellisense to NOT try to insert non-SQL code, or
2) Turn off Intellisense in the Expression window?

Hi TG99,
In Reporting Services, when we type a dot behind alphabets or square brackets in Expression dialog box, it automatically pops up a list begin with “Equals”. This is by design.
To work around this issue, we can directly write T-SQL query commands in Query pane or Query Designer pane of Dataset Properties dialog box. In this way, it wouldn’t pops up any character for auto IntelliSense.
The following screenshots are for your references:
If there are any other questions, please feel free to ask.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Allow the user to control the width of the edit forum post input box

I would like to control the width of of the edit-forum post input box. This could be:
automatically adjust the width of the box so that the box doesn't run off the right edge of the window.
have a user global preference to set the preferred width
at least, allow the user to change the width via the change size icon. The three horizontal bars at the lower left of the input box. You can adjust the vertical dimension, but not the horizontal. TenFourFox 4.0.1. This is probably being blocked for some obscure reason.
Here is an example of an over extended right margin:
Curiously enough, the "software" let's me adjust the width & height of the add reason to edit text, but not adjust the width of the more important edit text box.
Robert

Testing
Standard Reply box can be height adjusted but not width.
Same with Advanced Editor
No Adjustment at all in HTL Editor
Edit.
The Edit uses the Advanced Editor
Only Height Adjustment again.
I do seem to remember someone posting about the width and saying they could drag it over the edge of the right hand edge (Into the grey surround)
This may have been a post in the lounge.
It didn't actually try it at the time but have played with it since and have not seen it.
Maybe it is something they "Fixed" in both senses of the word.
Second edit.
I can't alter the box that currently reads "Message Edited by:- ..."
I also can't get this box to accept New lines (they appear in the box but don't post that way)
Corrected Spelling
9:51 PM Wednesday; May 11, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb( 10.6.7)
 Mac OS X (10.6.7),
"Limit the Logs to the Bits above Binary Images."  No, Seriously
Message was edited by: Ralph Johns (UK)
Message was edited by: Ralph Johns (UK)
and new line with a line space as well

Help! While editing a photo in CS3 the program shut down and will not reopen my psd file.

Help! While editing a photo in CS3 the program shut down and will not reopen my psd file. The error message reads "cannot complete your request because of a program error" -- it is a very large file (I have been saving it all along) and I had just "flattened layers" and went to open up a new, blank photo file when it shut down. Is there anyway to get this file to open? Any advice would be greatly appreciated! (p.s. after reading a couple of similar threads, I have a feeling it's hopeless. But I'd also like to know WHY this might have happened!) Thanks in advance!

Thank you. I appreciate you taking the time to respond and for sharing the article--I did panic. Here are the details of my system:
Model: HP p7-1247c
Processor: AMD A8-3820 APU with Radeon HD Graphics
Installed Memory: 8 GB (7.48 usable)
System Type: 64-bit
Windows 7 Home Premium
I am using Photoshop CS3. It seems that I can work on photos and save them. But I am unable to open them back up. I have tried saving the files as psd and tiff with the same result. The error message is: "cannot complete your request because of a program error"
The interesting thing is that I can open up InDesign and "place" the psd file within InDesign (then export and save as a jpeg). So I don't think the files are necessarily corrupted. I uninstalled Photoshop and reinstalled it last night, but there's no change.
If you have any ideas, I'd appreciate it. Or, should I repost my question with this more complete info? Thank you!

Error while editing PO - deleting service line item and creating material line item.

In SAP SRM Extended classic scenario, PO is in 'ordered' status and contains a service line item. While editing this PO, I delete the service line item and create a new material line item. This gives me the following error.
Back end error: Enter G/L account
Back end error: LIne item still contains faulty items.
This happens only with service- material comibination and no other combination(material-service, service-service, material-material).
I need to know the reason for this issue and how it can be solved?

PO Values (Inc Tax):
Item 1: INR 228 L
Item 2: INR 27.83 L   (Payment also done in 2008)
GR for Item 1: INR 207.46 L
Remaining Comm = INR 21.01 L
Item 1 having 73 sub line items.... fo some of the sub-line items GR for some qty already done in last fiscals.
User changing for remaining qty.
Budget Report values:
Previous Years: Budget, Actual & Assigned = 304.85 L
                            Available = 0      (Carry Forward done for Budget & Commitments)
2011:                   Budget = 75.15 L
                            Actual = 53.86 L
                            Comm = 21.01 L   (Same as Remaining Commitment)
                            Avai = 0.28 L
Hope this will help.

Error while trying to post inbound idoc of message type COND_A

Hi,
I am getting error while trying to post inbound idoc of message type COND_A.
If I left Usage & Condition field of segment E1KOMG then 'Table not available' idoc message is coming
and if providing value in above fields then dump is coming.
How to solve ?
Plz do reply
Thanks
Mohit

I do not see any reason why you would need to use COND_A04 if COND_A01 is working.
What if you could get COND_A04 to post and you would face the same result as in COND_A01?
If SAP does not check wrong values, then you have to do it yourself, or you report an incident at SAP (after you have searched for OSS notes that may have fixed this error already)
For example OSS Note 1169998 - IDoc: KONP-LIFNR values not checked
fixed a situation where the vendor number was not validated.

Odd Alert While Editing a Post

Similar Messages

Maybe you are looking for