Odd Application behavior - PS and web browsers

Photoshop CS and CS 2, Firefox and Camino do not display their tool bar correctly-Safari works. They are blacked out in PS. To correct it I just mouse over the object and it clears up. In the case of the web browsers the ads maybe tuned out so to speak like an old TV set would be. Not sure what happened. I have had the issue for sometime now but have not found any effective fix. I can email a PDF if you would like to see what happens in PS.
Thanks
Michael

Similar Messages

The fonts are too small on my imac desktop and web browsers. Where can I increase the size?

The fonts are too small on my imac desktop and web browsers. Where can I increase the size?

babowa wrote:
The only way to increase the fonts on your desktop would be system wide by going down a notch on the resolution. Some people won't do it because it increases the pixel size so the fonts won't be quite as sharp; I decided I'd rather have that than having to squint continuously. Go to System Preferences > Displays > Scaled > this will give you all resolution options available. No harm in trying - just check the default (top) choice again if you don't like any of the others.
It's a b*&^ch getting old . I still use the screen zoom instead of decreasing resolution, but maybe soon ...

BSP Application in Portal and WebAS Authentication popup

Hello,
we have a very well running SAP Portal SP14 and a BSP
application running WebAS 6.20.
SSO between Portal and WebAS works perfect. Profiles are maintained and verify.der is imported.
But:
From time to time we have users which open logon to
portal and execute the bsp application, authentication is successfull, but after a certain period of time or any unknown incident these users get a popup from webas and they are asked(forced) to enter their username and password. It seems to be that their session expired and they have to re-authenticate. But they are still logged on to Portal.
Can we prevent this popup from beeing shown to the user? Problem is, that they enter any password and they et locked
Does anybody have the same problem?
Thanks
Maik

Hello Maik,
i am newbee in SAP.I have little proble with SSO.I am using Ep7.0
Though i have imported the verify.der file and installed the certificate still SSO
doesn't seem to be working.I am getting error as:
"not authorized for executing BSP application".
Do i need to give any particular role to users or is any other setting required?
regards!

Configure Service Principle Name for Application Pool account and web application?

Hello Community
    On WS2012 Server running Sharepoint 2013 Server when you
configure SPN you configure it for the SQL server object "MSSQLSvc" (domain account)
and the user object "HTTP" (domain account).
    The question is if you also should configure SPN for the Application Pool account and
configure SPN for the web application, how do you configure SPN for the Application Pool
account and the web application?
    Thank you
    Shabeaut

The Web Application is only an IIS Site. You're configuring the SPN for the Domain User running the IIS Application Pool (that the Web Application (IIS Site) leverages).
So you would just need to use the format of:
setspn -A HTTP/webAppUrl domain\iisapppoolacctusername
setspn -A HTTP/webAppUrl.fqdn.com domain\iisapppoolacctusername
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

Exported Jpgs - Questions with regards to color profiles and web browsers

I along with others have noted the fact that it's not possible to instruct apertrue to save images without a profile. Up until recently I've been saving my images with the sRGB profile. I noted (as has been posted about elsewhere on the forums) that safari displays the image one way, and Firefox another. As others have noted, this is due to Safari being a color managed browser, and Firefox not being color managed.
However, when I save a jpg out of photoshop with NO color profile applied the image looks identical in both browsers.
I'm considering not using profiles as all if saving an image with an sRGB colorspace profile allows me to change the behavior so that Safari matches Firefox. I would love to go the other way (to do something magical to effect the way that images appear in Firefox) but that doesn't seem to be an options here.
So, after all that, my questions are:
1.) What is it specifically about not applying a profile, that makes Safari render images identically to FireFox (in other words, what's going on?)
2.) Is there any way to apply NO profile to an exported Aperture Raw image...not the camera profile, not sRGB...NOTHING.
I would guess a good runner up would be to use Automator to strip out the profile. But before I go making changes to my workflow, I'd really like to know why exactly this seems to work.

This doesn't produce the same effect as in Photoshop.
Photoshop has the ability to 'convert to profile'– to actually change the colors in an image so that even in a profile isn't embedded, the colors have been changed. If you choose to, you can also have Photoshop embed the profile as well.
Aperture on the other hand, -seems- to only have the ability to attach a profile to an image. In other words, it relys on color aware apps to interpret the image using the attached profile. (I can't seem to find a way to 'convert' to a profile in Aperture, in the same way I can in Photoshop– doesn't mean one doesn't exist, I just can't seem to find it)

Please Help- iWorks and web browsers keep freezing!

I left for a family affair two weeks ago with my MacBook acting normal as usual. I returned about a week ago to this issue I can't seem to resolve!
For starters- I am unable to use Firefox, which is the browser I normally use (I never use Safari, until now that is). I open it in the dock, it bounces for an unusually long amount of time, the page comes up but does not load, then the rainbow wheel pops up and Firefox eventually quits "unexpectedly" or due to "inactivity". If I try to force quit, the Finder freezes, the dock freezes, and I am unable to do anything but sit and wait. I've restarted several times and that hasn't fixed the issue.
So now I've been using Safari, which has also been giving me troubles. If I have two or more tabs open and the same time and continue to load pages at the same time and float between tabs frequently, Safari freezes up and eventually quits. If I try to force quit, the same thing happens as does with Firefox.
Also, I am unable to use Pages or Numbers (the only two applications I've seemingly had trouble with so far). Pages doesn't even pull up a document I try to open or pull up a blank page -- it just pinwheels and quits. If I try to force quit, the same thing happens as does with Firefox, the finder and the dock freeze up and I am unable to do anything but force a restart or sit and wait. Same with Numbers. It asks me if I want to open a blank page, and if I click yes, then my dear friend pinwheel pops up again.
I don't know too much about Macs, though I've never owned a windows, but I've been reporting my problems to apple numerous times (with no return) and I've been searching through other mac-related websites and they're forums. One forum suggested repairing the disk, which I don't know anything about, but did and that still hasn't helped.
I hope someone knows what's going on with my mac because I sure don't!

I am having this same problem and I have NO idea what is causing it. I have been searching high and low for an answer, and nothing seems to be appearing. The only thing I could think now is to maybe re-install Firefox. That is the browser I have been using and that this has happened in.

S12 Ion and Web Browsers

Hey Everyone,
I am generally fond of using Firefox and Google Chrome,
I have a question regarding browser experiences of users with Lenovo S12 (with Ion) : 2 GB ram, Windows 7 professional.
1) Which runs better, Firefox 3.6.3 or Google Chrome (normal version and the current beta)...?
I have found that with Google Chrome (regular and with current beta) the CPU workload constantly hits 100% with 2 to 3 tabs, but it doesnt happen with firefox(uses around 40 to 60%), do you all face the same thing ?
What are your experiences?
PS: I have not done any specific tests to find out the CCPU usage but use the simple windows gadget (CPU meter)

That's an odd one. I just typed apple in FF and was taken to Apple.com right away. No ideas on solution yet.

Frames and Web Browsers?

Dreamweaver CS3.
I am trying to make a page with frames, but when I test the
page, it only works with Chrome and Opera.
Anyone who can give a hint on why I only get new windows in
Firefox and IE?

Frames are not often the optimum choice for your layout
method. Why did you
choose them?
Can you post a link to your page so we can see the code?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"mfurmyr" <[email protected]> wrote in
message
news:gg0pn2$88p$[email protected]..
> Dreamweaver CS3.
> I am trying to make a page with frames, but when I test
the page, it only
> works with Chrome and Opera.
> Anyone who can give a hint on why I only get new windows
in Firefox and
> IE?

Why is my mac (OS X Lion) logging me off and shutting down randomly? Also web browsers (safari, chrome and mozilla) and applications (word, excel) are shutting down and then have error reports? Please help!!

My Mac (OS X Lion) keeps logging me off and shutting down randomly.. Also my web browsers (Chrome, Mozilla & Safari) keep quitting and so do my applications (word, excel).. Please help!

My Mac (OS X Lion) keeps logging me off and shutting down randomly.. Also my web browsers (Chrome, Mozilla & Safari) keep quitting and so do my applications (word, excel).. Please help!

Web browsers crashing and using up RAM on new Macbook Pro

Hey everyone,
Recently I bought a Mid 2014 Macbook Pro to replace my old 2011 model that was destroyed by liquid damage. Though I like this new computer, I seem to always have an issue with it running low on memory, ESPECIALLY when using web browsers such as Firefox and Safari. Quite often I will be waiting for a URL to load or will try to scroll through a webpage when the browser will freeze and crash. I've been keeping more of an eye on how much of my 8GBs RAM is being used at any current moment, and typically it is ranging from 2 GBs free to around only 30 MBs free as run applications such as Pages, Firefox, and/or Safari. These issues have been preventing me from using software such as Photoshop and Avid Media Composer because I keep wondering if the computer can even handle such memory intensive software if it cannot handle web browsers. Also when a browser crashes, I never seem to get a crash report and typically have to Force Quit the software.
It seems extremely odd that my computer is constantly running into these issues. My last model had less RAM, yet I never seemed to have an issue with memory or crashing. Part of me is wondering if I have an application somewhere that is consuming too much, or if I accidentally imported some broken files/applications from my previous computer, or whether it is either the web browser's software or the computer itself.
Below are my specs:
MacBook Pro (Retina, 13-inch, Mid 2014)
Yosemite 10.10.2 (14C109)
2.6 GHz Intel Core i5
Memory 8 GB 1600 MHz DDR3
Graphics Intel Iris 1536 MB
Media Name:    APPLE SSD SD0128F Media     Size:    120.47 GB (120,473,067,520 bytes)
Software i typically am running for work:
Safari Version 8.0.3 (10600.3.18)
Firefox 36.0.1
Pages 5.5.2
Any help would be very much appreciated!

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Step 1
For this step, the title of the Console window should be All Messages. If it isn't, select
          SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
          View ▹ Show Log List
from the menu bar at the top of the screen.
In the top right corner of the Console window, there's a search box labeled Filter. Initially the words "String Matching" are shown in that box. Enter the name of the crashed application or process. For example, if Safari crashed, you would enter "Safari" (without the quotes.)
Each message in the log begins with the date and time when it was entered. Select the messages from the time of the last crash, if any. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
☞ The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
☞ Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
In the Console window, select
          DIAGNOSTIC AND USAGE INFORMATION ▹ User Diagnostic Reports
(not Diagnostic and Usage Messages) from the log list on the left. There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of crash reports. The name of each report starts with the name of the process, and ends with ".crash". Select the most recent report related to the process in question. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
I know the report is long, maybe several hundred lines. Please post all of it anyway.
If you don't see any reports listed, but you know there was a crash, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
Please don’t post other kinds of diagnostic report—they're very long and rarely helpful.

Authentication between Single Sign-On and Web based applications

Hi everyone,
I need to create a way in Portal 10g (10.1.2.0.2) that allow me to do the following:
Once the user is logged on Portal (against Single Sign-On - SSO) he doesn't need to retype his username/password when he access a web based application throught the portal, in my case, an ASP application (not .NET, just ASP).
I made a test creating a External Application in SSO and after publishing this portlet (external application) inside portal.
It worked, BUT I was prompted to inform username/password to log on the aplication.
So, the user end up entering his password twice.
Does anybody know a way to acomplish this task?
The documentation I'm researching is:
Oracle Application Server Single Sign-On
Administrator's Guide
10g Release 2 (10.1.2)
B14078-02
Oracle Application Server Single Sign-On
Security Guide
10g Release 2 (10.1.2)
B13999-03
Thank you very much,
Diogo Santos.

have figured out how to secure any HTML, ASP, PHP, CFM, etc. web page again Portal / OID using the PDK toolkit.
Using AJAX (Asynchronous JavaScript and XML) and one Oracle Stored Procedure just adding a simple Javascript call to any HTML, ASP, PHP, etc. web page can secure it via Oracle SSO (OID). Access to any secured web page will require that it to be linked from an authenticated Portal session or a page opened in an authenticated Portal session.
This process can be easily modified to add in group security etc. This is just my starting point.
1) Create a stored procedure
# Make sure it has access to portal.wwctx_api.is_logged_on
CREATE OR REPLACE PROCEDURE login_ajax_check (
display_error IN number default NULL) AS
BEGIN NULL;
If portal.wwctx_api.is_logged_on = false then
htp.prn('DENY');
ELSE
htp.prn('ALLOW');
END IF;
Exception when others then htp.p('DENY');
END;
2) Use this Javascript in any page you wish to secure.
<-- Begin Paste Here -->
<script>
var allowgo=2
function ajaxCallRemotePage(url)
if (window.XMLHttpRequest)
// Non-IE browsers
req = new XMLHttpRequest();
req.onreadystatechange = processStateChange;
req.open("GET", url, false);
req.setRequestHeader("If-Modified-Since", "Sat, 1 Jan 2000 00:00:00 GMT");
req.send(null);
else if (window.ActiveXObject)
// IE
req = new ActiveXObject("Msxml2.XMLHTTP");
req.onreadystatechange = processStateChange;
req.open("GET", url, false);
req.setRequestHeader("If-Modified-Since", "Sat, 1 Jan 2000 00:00:00 GMT");
req.send();
else
return; // Navigateur non compatible
// process the return of the "ajaxCallRemotePage"
function CheckPortal()
ajaxCallRemotePage('[Your page calling the procedure from above]');
function processStateChange()
if (req.readyState == 4)
if (req.status == 200)
if (req.responseText.substring(0,4) == 'ALLO')
allowgo = 0;
else
allowgo = 1;
function doPage()
if (allowgo==1)
window.location='[Your login or error page]';
CheckPortal();
doPage();
</script>
<-- End Paste Here -->
That's it!!! Super easy. It works great too.
Larry Schenavar
[email protected]

Using Color profiles and exporting for web browsers

I've been trying to figure out the answer to this question. As I'm sure you're aware Safari supports color profiles while other web browsers like Firefox do not. I would like to setup Aperture so that it displays and exports images for the widest audience possible. Unfortunately it embeds a color profile and my images on the web only display correctly in Safari. I've tried changing the proofing profiles and export settings to no avail. I didn't seem to have this problem in iPhoto, a picture there looked the same on screen as it did in Safari and Firefox but I can't achieve the same with Aperture...

Thanks for that information, unfortunately I'm not really any closer to solving the issue since I've already tried that. 1) by default, doesn't Aperture automatically embed the sRGB color profile? 2) if I set view>proofing mode to sRGB shouldn't what I see on screen match what a "dumb" application such as Firefox does when it ignores the embedded profile and display sRGB? I've tried going into the preferences>export settings and changed everything to sRGB IEC61966-2.1 but I see no difference in the final image between that and the default setting.
I guess my question is more specific to Aperture since I don't have this problem with other applications. For example, in photoshop if I do Export for Web it strips out any embedded profile and when I open that image in Firefox and Safari side-by-side they are exactly the same. But not so when I export an image from Aperture, when opened in Firefox it is desaturated and flat and of course in Safari it honors the embedded profile and looks fine.

Flash player hanging up and crashing on all web browsers. Problem turned out to be AMD drivers

I have been having a problem running Flash Player, green screens, hang ups, crashes etc on my machine. I tried various solutions and every major and some not so major web browsers all to no avail. I tried reinstalling my windows 8.1 no good also tried running 8 and 7 all 64 versions. No go I came a cross a post about a problem with Flash and AMD that seems to recur every nown and then. I have a AMD HD 6670 1 gig GDDR5 PCI-E 2 card so I tried going back through AMD drivers untill I was able to get it to function properly. Finally I ended up using the driver from Dec 2013 13-12_win7_win8_64_dd_ccc_whql along with the AMD Media Codec Package from Aug 2012 12-8_vista_win7_win8_32-64_xcode Flash is now playing with no problems. I thought I would share the solution I used in case it might help others.
Message was edited by: Rodger Hall

I haven't run across this, though I did see a Firefox fileupload bug yesterday (https://bugbase.adobe.com/index.cfm?event=bug&id=2980517). Would you mind opening a new bug on this over at bugbase.adobe.com? Please include URLs where you're seeing this behavior and we'll investigate further.
Thanks,
Chris

Juno and Yahoo Webmail: Firefox makes the attach file button in webmail disappear and other web browsers don't

Using Juno and Yahoo webmail (only on this computer, not my others) the attach file button loads but then disappears when creating a new email or replying. All other web browsers allow me to attach files using these two webmail sites. This does not affect other sites like school applications to upload files for class in Firefox.

As mentioned in the original post, the user IS the owner and the permissions are WIDE open for the user. I have also tried to disable the anti-virus - no luck. The problem is ONLY happening in Firefox. Chrome and IE work perfect. There is also no problem in Windows. The user can add/remove/edit files in the directory. Right now the solution seems to be to use Chrome. I'm not excited about that, but at this point, the only option.

How do I configure my application to provide access for mobile and web brow

Hi everyone.
I have one application and I need to provide access for mobiles and desktop browsers, and I don't know how do I configure my application to do this.
Let me explain:
In my jDeveloper I have One application and 3 projects:
-Mobile (here is my mobile application)
-Model (here is my model)
-ViewController (here is my Web Browser application)
In Mobile I have
JavaEE Web Application name: mobile-Mobile-webapp
JavaEE Web Context Root: mobile
ViewController I have
JavaEE Web Application name: mobile-ViewController-webapp
JavaEE Web Context Root: myapplication
When I run some page of ViewController I have this URL "http://localhost:7101/myapplication/index.jspx".
When I run some page of ViewController I have this URL "http://localhost:7101/mobile/index.jspx".
My problem is that, I want to have Just one landing URL like that "http://localhost:7101/myapplication/index.jspx" and when I get this URL by Desktop Browser my ViewController is showed, and when i get by Mobile the Mobile project is showed.
Someone knows how do it?
Thanks....

Yes, I can, thanks for response.
But, don't have some configuration in Oracle for this? I've been thinking do this with java or JavaScript, but I was looking something more beautiful for this.
Java or JavaScript is the only way?

Odd Application behavior - PS and web browsers

Similar Messages

Maybe you are looking for