Odd clicking noise when connecting to my macs

My friends from Switzerland brought his ipod that just stopped working, when I plugged it to the outlet the machine powers up but when we remove it fails to transfer over to the battery. Now I concluded (with some help here) that there must be something wrong with the battery. But when I plug it to the USB 2.0 ports on the Quad G4 I hear a click or beeping sound like it is trying to load it but it can't. Now it is windows formated but it should appear with at least a message on my machine. Could the USB 2.0 chip also be fried since USB 2.0 was never originally designed to carry power like Firewire was. If it is then should I buy him a new one or replace the motherboard myself.

Did you not see what happened in the Eniac's?
http://www2.lv.psu.edu/OJJ/courses/ist-240/reports/spring2001/fa-cb-bc-kf/1941-1 950.html

Similar Messages

  • My time capsule cannot connect to my system and I get an error msg -6753. I also get a clicking noise when I start up. I've tried every thing from re setting, un plugging and re setting but nothing works. Anybody have the same problem ?

    my time capsule cannot connect to my system and I get an error msg -6753. I also get a clicking noise when I start up. I've tried every thing from re setting, un plugging and re setting but nothing works. Anybody have the same problem ?

    A "clicking noise" is often a sign that a hard drive is malfunctioning. Suggest that you power down the device and take it to an Apple store to have them take a look, or contact Customer Service at Apple for instructions.

  • I can't get my ipod classic (120GB) to work. I am getting error code 1434, and the ipod is making a lot of clicking noises when plugged in

    After coming back from Hawaii, my Ipod classic doesn't work anymore. When plugged into itunes, it says that it may be corrupt, and that I need to restore it. I have tried this, but everytime it gives me an error code of 1434. When I click more information, it sends me to a support page, but not for error code 1434. I tried all of the steps on the page hoping that it would help. Also my ipod is making  a lot of clicking noises when it is trying to run, alomst as if it is skipping inside and can't fully run. Can anyone help me ?

    Clicking sounds from an iPod that has a hard drive for storage is not a good thing.  It usually means the hard drive is faulty.  That is the likely reason for getting an error during the attempt to Restore.
    If you use a Mac, you can try putting the iPod into Disk Mode
    http://support.apple.com/kb/ht1363
    If it goes into Disk Mode, connect the iPod and instead of running iTunes, run Disk Utility.  Does the iPod appear in the Disk Utility sidebar?  If it does, select the iPod device in the sidebar, not the volume indented below the device (if there is one).  Go to the Erase tab.  Set the Format to Mac OS Extended (Journaled).  Name does not matter.  Click on Security Options and choose to write a single pass of zeros over the entire disk.  This serves as a good "stress test" for the iPod's hard drive.  Back on the main window, click Erase.
    This takes longer than a regular erase, but you should see steady progress.  If it errors out, or stalls for a LONG time (like hours), the hard drive is likely to be faulty.
    If it completes successfully, quit Disk Utility, run iTunes and try to do another Restore

  • Clicking noise when playing rented movie on apple tv

    I am having trouble with my apple tv making a clicking noise when playing a rented movie from the iTunes store. Any suggestions?

    I get noise, krackering/clicking noise in left channel on rented movies, music/movies played through iTunes. NOT on Netflix. Only Apple content.
    Connected to a Samsung TV via HDMI.
    Very anoying.
    Any ideas?

  • Small clicking noise when moving

    hello, ive only got the new macbook pro 13 the other day. when i slightly move the machine, it makes a small clicking noise (when its running with lid open), but it doesn't every time, like 3 out of 10 times. and i dont mean moving as in taking it into a different room, i mean like a slight move if i need to stretch or a wobble of my body with the macbook. any advice pls? thanks

    My 2.53ghz 13" macbook pro is doing the same thing. This is odd because the 13" unibody macbook I had before this also has SMS and it never did this. If it is the SMS sensor, it is kicking in for very slight movements.
    Could it be the SMS sensor is a little too sensitive? If so, is this something I should be concerned about?

  • Does the ipod nano charge quickly when connected to a mac?

    hi everyone.
    I recently switched from windows to a macbook. i noticed that my ipod nano(second generation) charges quickly when connected to the mac as compared to when i connected it to my pc? is this possible or is there something wrong with my ipod? it is 11 months since i got my nano. kindly help.
    this is my first post
    Thanks in advance
    Naren

    I assume you're talking about using the Apple cable with either component or composite cables. On a non-HD TV, the quality is quite good. I'm not sure what you mean about picture size. It doesn't letter box anything, if that's what you mean. Used to do it a lot when I went away for the weekend. It was an easy way to take iTunes rental movies with me and watch them on a big screen. I've never tried with my HD TV because i haven an Apple TV and there's no need.
    Best of luck.

  • IPod only charges when connect to the Mac

    My iPod will only charge when connected to the Mac.  It will not charge on any other cable or docking station.  And, yes, I have tested the various cables and docking stations with other devices and the issue is clearly only with this one device.  I am note sure what generation the device is, but it is old enough that it cannot run iOS 7.  It is on iOS 6.1.5.
    Thanks

    Then it seems that the other sources do not work satisfactorily. Do the other charging sources charge other devices?

  • When i plugged in my ipod charger into my macbook pro it off instantly and wouldnt turn back on, also the charger displays a dim green light when connected to the mac. Does anyone have a sollution to this problem?

    When i plugged in my ipod charger into my macbook pro it turned off instantly and wouldnt turn back on, also the charger displays a dim green light when connected to the mac. Does anyone have a sollution to this problem?

    The dim green light appears to be flashing orange too

  • Ipod mini 2nd gen: clicking noise when plugged in only

    My mini just makes clicking noises when I plug it into the usb port. I thought it was the hard drive after reading tons of posts about the clicking noise, and got a compact flash replacement but it is still clicking. I dont think it is the battery. If it was, it should hold some sort of charge shouldnt it?
    What could be causing it?
    Is my mini out of whack? I did drop it before it died 2 years ago, but it worked for quite a few months after dropping it though. I just got around to working on it now cuz I miss it.

    thanks for the reply. well changing the hard drive was easy. it might be the battery. it did give me some errors before it crapped out. i just dont remember what those were. i think it was an apple with a lightning over it, which would indicate a bad battery i suppose. i will try to change the battery and see how that goes. i just cant troubleshoot since nothing comes on, except for a faint clicking noise when it's hooked up to the usb.

  • When connected to my Mac my iPad says "not charging", but it does seem to sync.  What am I doing wrong?

    My iPad says "not charging" when connected to my Mac, but it does seemo sync.  What am I missing?

    A lot of computers (especially older ones) generally do not provide enough power to their USB ports to charge the iPad at a sufficient rate - it may still be charging slowly, and should be a bit quicker if the iPad's screen is off (if you leave it for a while and then disconnect it from your computer you may find that it's battery percentage has gone up). The wall charger is usually the most efficient way to charge the iPad.

  • Little clicking noise when computer picked up or moved.

    is it normal that my macbook pro 13 makes a little clicking noise when moved suddenly or picked up ? it sounds like the optical or hard drive to me.

    Hi nomadikpat,
    Your machine has an SMS (Sudden Motion Sensor) that is designed to park the drive head inside your hard drive when the machine receives a quick and sudden external force. This safety feature is designed to preserve the HD so that a mechanical failure doesn't potentially cause data loss.

  • Why does my MacBook Pro make clicking noises when pressure is applied to the unibody?

    I purchased a MacBook Pro in late July of this year. Recently, I have noticed that when I begin to type on the keyboard, the unibody will make a faint sound when pressure from my hands is applied to the MacBook. I also notice a faint clicking noise when I pick up the MacBook Pro to move it somewhere. Additionally, the screen hinge makes a faint clicking noise when the screen is opened. Are these sounds normal?

    Check if an AASP (Apple Authorised Service Provider) is closer, as some do not trust Geek Squad to diagnose something as simple as "all the keys are missing". But judge for yourself.: http://support.apple.com/kb/HT1434

  • Clicking noise when putting in disk

    I just got my mac last month, and until a week ago, had not put a disk in it. When you load a disk, it makes a really loud clicking noise. The drive seems to work fine and burn disks, but is the noise normal?
    MacBook   Mac OS X (10.4)  

    The noise is completely normal. Since the slot loading drive is a little different from your typical "tray" type drive, what you hear is the motor pulling in the disk and then seating it.

  • MBP 13": single clicking noise when cooling down

    Hello, I noticed that every time when my 2011 MBP cools down, say, after playing a game or other processor/graphics-intensive tasks, a single clicking noise is emitted (roughly) from the area around the left side of the keyboard. Is this a build quality issue? Should I be concerned? Thanks in advance.

    Well, I found out the solution to this problem. My 3 month ago MBP had the internal hard drive die on it. I took my MBP to the Mac Genius and he tested it a number of different ways. The HD was bad. I really needed my MBP for a business trip the next week so I bought the ProCare card to ensure that my MBP would be fixed in time. It was ready three days later. No problems since!

  • My iPhone and iPod do not show up on iTunes when connected to my mac.

    iPhone and iPod do not show up when connected to iTunes.

    See either http://support.apple.com/kb/TS1538 (windows) or http://support.apple.com/kb/TS1591 (mac).

Maybe you are looking for

  • Why can I not drag a photo into a different position, In a "smart album"?

    Why can I not drag a photo into a different position, In a "smart album"?

  • Xbox/wifi comcast conflict issue

    Let me start this by saying I really don't know I'm trying to learn. Ok now that's out of the way I've noticed there's a post from a comcast employee about a conflict between xbox live and comcast that's not allowing some ppl to play over wifi networ

  • Element 'when' not found in 'xsl:choose'

    Hi, I'm trying to create a very basic choose / when /otherwise instruction in an RTF template. I have created 6 fields, with the following codes: <?choose:?> <?when: E.TYPE='I'?> * do something * <?end when?> <?otherwise:?> * do something else * <?en

  • How to upload error records in call transaction method

    Hi all, While uploading data by using call transaction. If any errors occured, how can we process that  error records to database. If all records are processed. How can we display the recent records which where uploaded. AdvanceThanks for all.

  • Special Order By Clause

    Hello NG As initial position the following table: ID Name Flag <Anything> Date 1 Müller 0 .... 01.01.2002 500 Schmitt 0 .... 25.11.2002 7500 Graf 1 .... 30.11.2002 100000 Seiler 1 .... 31.12.2002 The ID is to illustrate that in the table are > 100000