Odd Domain Profile Issue

You might want to transfer all the data from their old profile to the new one as well. or you can just have a very pissed off Francis on your hands. LOL

Rebuild Profile and delete Registry Keys for that User:
1. Reboot PC to release any locks on the profile.
2. Log on with an administrative account.
3. Go to C:\Users\
4. Rename profile with the word “.old” at the end of it. Example: “username” becomes “username.old”
5. Delete the registry key for that user. In Registry Editor: “HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\WindowsNT\CurrentVersion\ProfileList”
-In the “Profile Image Path” value. Find the key that lists the proper user name to be deleted. NOTE THE LAST 4 DIGITS OF THE KEY. Then delete it.
-Then find this path. HKLM\Software\Microsoft\Windows NT\Current Version\ProfileGuid
-Find and delete the key with the four digits from the last step.
6. Reboot the computer again.
7. have the user loging

Similar Messages

Use old domain controller AD user profile with new domain (profile changed)

Dear All,
I have built Win Server 2012 for Domain migration from Windows Server 2003 to Windows Server 2012. I have tested all thing on VMware including user creation and tested Domain join using power shell for Win 7 and .VBs batch file for Win XP computers all thing
are working fine.
Let 1st I introduce my current environment. I have existing Win Server 2003 domain controller (abc.com) with 130 client computers and 200 users I am going to plan migrate my current environment to Win server 2012 Domain (xyz.com) Keep in mind that Domain
name is changed but Domain Controller (Server) names are same i.e MY-PDC . I have tested domain join on multiple computers using existing clone of client computers and create all existing users using .csv file and power shell with required
credentials and OU.I am facing the user profile issue when I join domain and login with existing user which was previously the user of same computer the required profile does not login and computer creates new user profile in Document and Settings section
of Win XP.
I need your expert opinions because copy old profile data and create new outlook profile for each user is a big headache for any one. Hope you people can understand and help me in this issue.
Please provide best answer and result on priority I will be thankful to all of you.
Regards,
Arsalan

Hi Arsalan,
Please check if USMT can help you to achieve this target.
User State Migration Tool 4.0 User's
Guide
Meanwhile, please also refer to following articles and check if can help you.
How
to Migrate Windows User Profile to New Account
Keeping user old domain profile
Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft
does not guarantee the accuracy of this information.
If anything I misunderstand or any update, please don’t hesitate to let us know.
Hope this helps.
Best regards,
Justin Gu

InDesign keeps crashing ever since I switched the user to a domain profile from a local, what can I do?

InDesign keeps crashing ever since I switched the user to a domain profile from a local, what can I do?

He's running ID CS6 on Yosemite, and it is random as of now. No particular thing makes it crash, it just displays that the program has stopped running. However when we switch to his local profile he can work with no issue.

Local Account Migrated to Domain Account Issue

I used the Windows Server 2012 Connector tool to migrate a local profile to a domain account on a WS2012E Server. The problem is, when the user logs in to the laptop, we will call Laptop1 using his domain account we will call DomainUser1, Laptop1 is
still using the folder for his old local account (we will call LocalUser1). Laptop1 was the machine used to migrate the local account to domain account. When DomainUser1 logs in to another terminal, we will call Desktop1, it takes a long time to
login. After this initial long login time, he can then log in to other terminals that are NOT the Laptop1 machine with normal login speed. As soon as he goes to login to Laptop1, it takes forever again.
My theory is that Laptop1 is using a different SID for his domain/local account, which is causing the slow login speed, as windows has to update permissions for all his files. This is a very confusing scenario to explain, so I hope you all are following
me.
To recap:
DomainUser1 logs in to Laptop1 - the local profile uses folder C:\Users\LocalUser1
If DomainUser1 logs in to any other terminal - the local profile for that computer uses folder C:\Users\DomainUser1
My theory is that this difference is causing slow login times. No other users on the domain are having login issues other than those users that had their profiles from their personal computers migrated to the domain accounts. All other domain
users that had their files migrated using the tool are having similar slow login times, when access their personal computers and then switching to other terminals.
How do I go about changing the local profile on Laptop1, when logged in as DomainUser1 to use folder C:\Users\DomainUser1 rather than C:\Users\LocalUser1?

Hi,
Thanks for your posting.
Only the Laptop 1 have this issue?
Check this thread:
http://social.technet.microsoft.com/Forums/windows/en-US/5a27b553-0c33-4de6-8219-6356645e6b7e/windows-7-change-local-profile-to-domain-profile-instantly?forum=w7itprogeneral
For the Windows Server 2012 Essentials, i think you may ask in:
http://social.technet.microsoft.com/Forums/windowsserver/en-US/home?forum=winserveressentials
Regards.
Vivian Wang

My macbook pro was repaired and since then i can't get nor photoshop or bridge to initialize. a window appears that says it has initializing problems due to an icc profile issue.

my macbook pro was repaired and since then i can't get nor photoshop cs5 or bridge cs5 to initialize. a window appears that says it has initializing problems due to an icc profile issue.
there appear two error messages. the first one says that there has been a problem sincronizing because of a programme error. the second one appears after you clicked ok on the first window and says that photoshop couldn't be initialized because the icc profile is invalid.
does anyone know if i have to delete any system or photoshop preference? the illustrator is also having troubles. thanks

thanks! what finnally worked better was renaming the «settings» folder in te «color folder» in the library with ~before the name. now indesign is asking me for thw icc profiles but still works, so i asume i can reinstall color settings only for indesign and go on.

Colour Profile issues between North America and Europe

I have a corporate colour, C80M80Y0K0 which creates a very attractive shade of purple. Within North America all printouts demonstrate very similar variations of that purple colour. We have an office in UK that uses the same collateral pieces. While they preview correctly on screen, they are unable to reproduce that purple in their office or with their professional suppliers (all digital processes). The resultant colour is blue (approx C92M68Y18K0).
The files are created in Indesign, using a process colour within Indesign, and then exported to a PDF and shared with the UK office.
My guess is that it is a colour profile issue - has anyone else had this same issue, and if it is indeed a colour profile issue, what profile would you recommend using? I've tried using some of the other default profiles within Indesign but with no luck.
Any assistance would be really appreciated.

The resultant colour is blue (approx C92M68Y18K0).
What preset are you using for the Export, or what are the Output settings? Have you tried PDF/X?
PDF/X-4 will leave color unchanged and profile everything, so a color change like you are describing most likely means the wrong output profile is being used in the UK.
PDF/X-1a forces everything into your doc's CMYK space and makes conversions at output less likely—with X-1a your 80|80|0|0 mix will probably be output unchanged.

ITunes doesn't open when using cached domain profile

I have iTunes 10.5.2.11 installed on my Windows 7 machine.
When I am connected (via a LAN) to the Active Directory domain, iTunes works fine, opens etc.
However, when I login to the laptop at home using my cached domain profile, iTunes does not load, or even give an error message.
Help?

gta129,
Do you have iTunesHelper set to start up when you login? To check if it's in the list of login items:
1. Open System Preferences.
2. Click the Accounts pane.
3. Select your user.
4. Click the Login Items tab.
5. See if iTunes Helper is listed here.
Hope this helps,
Jennifer B.

Slow Broadband Connection - Likely IP Profile Issu...

Hello,
For an age I've had a rubbish broadband connection, but the hassle of call centres and engineer visits have put me off sorting it out. In August I got frustrated enough to try to get it resolved - I have a couple of work/study things that need a decent internet connection. After repeatedly trying all the troubleshooting guides and the suchlike, I finally noticed a reference to IP Profiles on the BTW performance test results.
Further research suggested my practice of turning the Home Hub 3 off when not in use has likely resulted in a fault profile being created, limiting me to 0.25Mbps. This conclusion was backed up by a relative and a friend who are BT engineers. I left the Home Hub 3 on for 30 days, but there was no improvement. I turned the hub on and off to see if it needed to reset itself, but no improvement. It has now been on for 12 days. The advice on the forum and from others seems to be that I need BTW to reset my profile as it has become set at the fault level, because I left it too long to sort out.
I have now sent an email to BT support, but the initial response suggests they are going to go through every step on the way, despite me laying out all of this. I keen to know your thoughts on if I'm in the right diagnosis area and whether there's a quicker way to get the IP Profile reset to see if that is the issue?
Many thanks,
Gavin
BTW Performance Test now:
Download speed achieved during the test was - 0.25 Mbps
For your connection, the acceptable range of speeds is 0.1 Mbps-0.25 Mbps.
IP Profile for your line is - 0.25 Mbps
Upload speed achieved during the test was - 0.8Mbps
Additional Information:
Upstream Rate IP profile on your line is - 0.83 Mbps
ASDL Line Status now:
ADSL Line Status
Connection Information
Line state: Connected
Connection time: 12 days, 22:13:59
Downstream: 286.3 Kbps
Upstream: 1.016 Mbps
ADSL Settings
VPI/VCI: 0/38
Type: PPPoA
Modulation: G.992.5 Annex A
Latency type: Interleaved
Noise margin (Down/Up): 31.5 dB / 6.0 dB
Line attenuation (Down/Up): 13.1 dB / 8.0 dB
Output power (Down/Up): 18.1 dBm / 12.7 dBm
FEC Events (Down/Up): 0 / 8929
CRC Events (Down/Up): 1 / 13883
Loss of Framing (Local/Remote): 0 / 0
Loss of Signal (Local/Remote): 0 / 0
Loss of Power (Local/Remote): 0 / 0
HEC Events (Down/Up): 0 / 2794
Error Seconds (Local/Remote): 1 / 441

it is not an IP Profile issue as on ADSL2+the profile follows the connection speed automatically your problem is a banded profile caused by a number of hub disconnections /restarts you need to maintain a stable connection 24/7 for the next 3/5 days and then your noise margin will then start drop and your speed start to increase this link explains more http://forumhelp.dyndns.info/speed/speed_drop.html
Here is a basic guide to getting help from the community members done by CL Keith Please read through the link posted http://forumhelp.dyndns.info/speed/first_steps.html
once you have posted the information asked for then the community members can help you more
Thank You
This is a customer to customer self help forum the only BT presence here are the forum moderators
If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

Move user profile to new domain profile on same computer

If you want to copy data and most of the preferences, I suggest Fab's AutoBackup 6 Pro.
http://www.fpnet.fr/

Hello all
I've been given the tedious task of replacing a server with a new one using a different domain, then rejoining all of the desktops to the new domain.
There won't be any kind of migration, just rejoining desktops to new domain.
Has anyone got any recommendations on what would be the best way to transfer the desktops user profiles from the old domain profile to the new domain profile?
Any advice would be appreciated.
Thanks
This topic first appeared in the Spiceworks Community

New Domain Profile can't see Oracle ODBC Driver

Has anyone ever moved a desktop to a new domain? If so, have you ever run across the new domain profile not being able to install software that edits the registry? Here's what I did:
1. Changed TCP/IP settings to DHCP on desktop.
2. Moved cable in network room from old hub to new hub.
3. Joined new domain on desktop.
4. Rebooted the machine and logged in with domain credentials.
5. Added domain account to local machine administrators group.
6. Logged off and logged back on with new privilages.
Here's where it got weird. I then tried to test a VPN connection to an external data warehouse. The VPN connected properly, but when I attempted to make a connection to the database (through Crystal Reports), it bombed and said the ODBC driver wasn't installed (it was under the old profile). So, thinking I was smart, I grabbed the Oracle 9i client disk and reinstalled the client to get the ODBC driver back.
At which point, I received an error stating I didn't have permission to write a key in the registry. This is semi-funny, since I was then able to re-install JInitiator, which does write to the registry, with no problem. Any suggestions??????
Glenn McWilson
Workforce Development Council of Seattle-King County
[email protected]
206.448.0474

A few simple things to check: printer powered on? USB cable OK? Is it connected, as well?
If it doesn't automatically show up in the printer setup utility, try choosing "More Printers" and then select Epson USB. See if it shows up then.

How do you find out if the domain profile is active in the firewall?

A script needs to determine if a firewall profile is active. Does anybody know of a function to do this?
The problem I a trying to solve is when a server boots it may not activate the domain profile. It happens if the server is booted before a domain controller comes on line or if and adapter team is in use. To solve this, I run a script at boot
up that waits and then restarts the nla service and typically the domain profile will become active. However it isn't fool proof. I want to modify the script to verify that the domain profile has become active. However, I cannot find a function
to determine if the domain profile is active. Can someone help with this?

Are you using something with PowerShell 4.0 that has the NetSecurity module? The second part of that question will be based on the version of the Windows Operating System. To check, try this: Get-Module -Name NetSecurity. If you do, you can based your logic
around the Get-NetFirewallProfile and, perhaps, the Set-NetFirewallProfile cmdlet.
Get-NetFirewallProfile -Name Domain
Get-NetFirewallProfile -Name Domain | select Enabled
Get-NetFirewallProfile -Name Domain | select -ExpandProperty Enabled
(Get-NetFirewallProfile -Name Domain).Enabled
To enable (or, activate) the profile, you can pipe your Get- cmdlet to the Set- version of the cmdlet.
Get-NetFirewallProfile -Name Domain | Set-NetFirewallProfile -Enabled:True
Without access to this version of PowerShell and this module, you'll either need to use netsh and/or WMI. I haven't checked myself, but I wouldn't be surprised if you can find something in the
Gallery.

Changed domain profiles - now unable to verify identify for password recovery

This problem seems to have incorporated parts of other threads. I do not know if the anyone else ended up at the same place - frankly, the IBM / Lenovo support process is bewildering.
Anyhow, we switched domains recently. I dropped the domain profile to a local profile, then rejoined to the next domain. Problems ensued.
At this point, I have gone into BIOS and purged all fingerprint information (after uninstalling CSS 8.0 and fingerprint 5.6 software). Reinstalled CSS (8.1) and FP 5.6. Was eventually able to delete the fingerprint profiles associated with the previous user profile. Enrolled FP for the new profile.
I am repeatedly asked to verify my identify. However, I am unable to modify / recover the CSS password. I can complete the three questions to get into the password manager, but never can reset the CSS pw)
Frankly, I do not even know if I am describing this correctly. Uugh. Any help would be greatly appreciated.

What I had to end up doing was re-sync the password used on the old domain with the password stored in the CSS.
I did this be changing my password under the windows change password function. The password had to match exactly. After that, I logged into CSS normally, without a hitch. Once confirmed, I could modify my windows password normally, and CSS somehow synchronized with this.
Hope this helps.

HT204387 BOSE Bluetooth wireless headphones work with iPhone but not iMac - Profile issue I assume - but why not!!!!

I have a great pair of BOSE wirless headphones that connect faultlessy to my iPhone. I'm very dissappointed however to find that I cannot use the same headphonse on my iMac or my MacBook Air. I assume it's a bluetooth profile issue but in product utility terms it makes no sense. Is anyone aware of a way of circumventing this resytiction (e.g. third-party product, mac setting,...etc)?

Yes. This has to be the 8.xx iOS.
I have experienced this since purchasing the 6+. Now, I attempting to pair the phone to Sync in my Ford F150, it
can't find the phone. I go through any number of attempts: rebooting the phone, finding a bluetooth device on Sync, etc.
Most of the time it shows a "cannot find bluetooth device". Or the Sync shows a pairing number to type in the phone in order
to pair, but the iPhone doesn't see Sync, so nothing can be done.
Sometimes, and I mean only sometime, the device is paired by itself. (On sync, "choose input: usb or bluetooth" and trying this
several times, Lo and Behold.....wait for it......the iPhone 6+ connects!
This is not what I had, an iPhone 4S, that one pairing, and always paired. (truck off, crank and instantly paired). The old days!
I have check Ford to look for an update. I have the latest from 2012. The final one for my truck model year.
This version of iOS needs works and must be updated again.
I don't know who to contact at Apple but the mods here don't say how to do that. It another Apple waiting and see.
If I find a solution, I will post it immediately. I hope you will post as well. Thanks for reading.
M.

Windows Server 2012 R2 Session Host Server Temp Profile issue.

HI,
I successfully Deployed Windows server 2012 r2 Terminal services with High Availability.
After Rebooting Session Host Server i am facing Temp Profile issue. After i Deleted registry and rebooting server and tried to login again but same popup message you have login with temp profile.
Any suggestions or any hints would be GREATLY appreciated
/HR

how did you delete the profile?
also are you using UPD disks?
What errors are shown in the event log if any?
Regards,
Denis Cooper
MCITP EA - MCT
Help keep the forums tidy, if this has helped please mark it as an answer
My Blog
LinkedIn:

Win7 pro joins essential2012r2 domain profile migrate but has encrypted folders

Have a workstation set as workgroup that had encrypted folders for user. Workstation renamed and join to Essentials 2012r2 server using utility. It also merged user profile to domain. User did not say about encrypted folders. Now can not access files in
folders. I have located the certificate and key from original user profile. How to recover access to encrypted files? Does workstations need to be dropped from domain and change back to original name and workgroup? User profile is already associated
with domain profile.
Thanks for any help

Hello,
The folders were encrypted with EFS on the desktop of a user profile when the system was on a workgroup. Then the computer name was changed and join to the domain for Essentials 2012r2 with the connect utility. The utlilty then migrated the users
profile to the domain login. The folders are now on this users profile desktop. When looking at the security access it is displaying the old user/oldwksname as authorized to access. These folders can not be moved or copied as the domain user
does not have permission to do so.
I locted the cert and key from the old user profile/appdata path. Can these be used to gain access. under cert manager of domain profile it does not have the associated key to the cert for export.
thank you

Odd Domain Profile Issue

Similar Messages

Maybe you are looking for