Odd error (-3001) when using Software Update since Leopard upgrade

Whenever I try to install anything that shows up in Software Update now, I get this error:
You do not have appropriate access privileges.
A networking error has occurred: Cannot open file (-3001). Make sure you can connect to the Internet, then try again.
However, I AM connected to the Internet, and I AM an Admin. I should have no problems doing this, and the issue only tarted when I installed Leopard. Anyone know of a fix?

Anyone have any ideas about this one? Still can't do a software update.

Similar Messages

  • Error message when using Software Update

    Hi everyone. I'm getting the following error message when trying to download some items via Software Update:
    "None of the checked updates could be saved. A networking error has occurred: Cannot open file (-3001). Make sure you can connect to the Internet, then try again."
    This is for the following downloads:
    iPhoto 7.1.4
    iDVD 7.0.2
    iMovie 7.1.4
    Security Update 2008-005
    Any ideas? I have no problems with Internet access at all. I'm running a new 24" Intel iMac 3.06 GHz with Mac OS 10.5.4
    Thanks for any help you can provide.
    Bruce

    Hello b:
    It sounds simplistic, but restart your computer if you have not already done so. I looked, but could not find that particular error code.
    Barry

  • MacBookPro won't download updates. No error message. Using Software Update.  Gray box just turns a lighter shade of gray

    MacBookPro won't download updates. No error message. Using Software Update-not using App.  Gray button just turns a lighter shade of gray and just sits there.  Have done previous downloads last one on Jan.9 for desktop and two others. 

    So I've realized that iTunes needs service pack 2 for
    XP, and I have 1, so I'm trying to download it, but
    that's not working either... I wonder if you know
    windows as well as apple? I have to turn the Active
    x controls on and this tool bar is to appear so I can
    do that but I can't get it to appear. I've tried
    raising the security settings but nothing appears...
    interesting.................what is service pack 2 and where can i find it? My itunes still flickers on and off when i attempt to use it. .. and how do i get to the active X controls so that i can adjust them? Thank you guys so much for your time and assistance :-D

  • I got error 3295 when doing software update to 4.3.4 on my iphone4.. can some one tell me how skip this error?? I'm new to apple products..!?

    I got error 3295 when doing software update to 4.3.4 on my iphone4.. can some one tell me how skip this error?? I'm new to apple products..!

    anyone????

  • Error when using software update server

    Whenever I try to point a non-managed client to use my software update service, I am getting this error;
    2007-10-23 16:42:59.054 softwareupdate[8958] Loading CatalogURL http://fileserver.occumed.net:8088
    2007-10-23 16:42:59.068 softwareupdate[8958] loader:didFailWithError:NSError "XML parser error:
    Encountered unknown tag HTML on line 2
    Old-style plist parser error:
    Malformed data byte group at line 1; invalid hex
    " Domain=SUCatalogLoader Code=0 UserInfo={
    NSLocalizedDescription = "XML parser error:\n\tEncountered unknown tag HTML on line 2\nOld-style plist parser error:\n\tMalformed data byte group at line 1; invalid hex\n";
    NSURL = http://fileserver.occumed.net:8088;
    XML parser error:
    Encountered unknown tag HTML on line 2
    Old-style plist parser error:
    Malformed data byte group at line 1; invalid hex
    Software Update Tool
    Copyright 2002-2005 Apple
    Any ideas whats causing this?
    The software update does not return an error if not using the unix console, it just shows no valid updates.

    The reason why you are receiving is because you don't have the forward slash after the 8088.
    Your current setup: http://fileserver.occmed.net:8088
    Correct setup: http://fileserver.occmed.net:8088/
    This will solve your problem.

  • Getting error 3001 when using Excel Easy Table.vi

    When making a call to Excel Easy Table.vi (Report Generation Toolkit) I get a 3001 error.
    I have attached an example VI to demonstrate the problem.  Please run "Add Table Example.vi" in the attached zip.  This sample program is made up of VIs from a larger program, so it made more sense to create a sample program and only include the required VIs than include the entire large program.  So that is why the Report class wire comes from a functional global VI.
    What is a bit strange is that Excel Easy Table is used to write a summary table at the top of the spreadsheet successfully in "Initialize Report.vi."  It is only when I then make the additional call to Excel Easy Table in Add Table Example that I get the 3001 error.  If you have any ideas why I'm getting the 3001 error, please let me know.
    I'm using LabVIEW 8.6 and RGTK 1.1.4.
    Thanks,
    Joel
    Solved!
    Go to Solution.
    Attachments:
    Add Table Example.zip ‏113 KB

    Hey Joel,
    I figured out why this error was occuring. After comparing how you were adding the columns in the Report Write Info Table.vi in the Initialize Report.vi to just using the Excel Easy table VI, you hadn't provided a reference to which worksheet it needed to write the data to. I changed your code to include this reference and it worked perfectly without any errors. I have attached a .zip file with those changes so you can look at it.
    FYI: Don't try to use this code as a direct replacement with yours. In order for me to reproduce the error, I had to modify several VIs in order to get it to run.
    I hope this information helps you with it.
    Jim St
    National Instruments
    RF Product Support Engineer
    Attachments:
    Add Table Example.zip ‏146 KB

  • HT4623 error 9006 when downloading software update for 4S phone - have tried twice - same story. Any suggestions anyone please ?

    I cannot upgrade my software - using cable to pc in iTunes - starts download and then about 2-3'rds way thru says error 9006 can not complete downloa.  Have now tried THREE times - eating my data - anyone have any suggestions please

    error 9006 http://support.apple.com/kb/TS3694#error9006  follow instructions from link to resolve.

  • Can't change Apple ID when using Software Update

    When I try to update installed Apps from the App store, I am shown an Apple ID that is incorrect. It is grayed out so I can't change it. Therefore, I can't install updates to my purchases (or free Apps downloaded and installed. How can I fix this? Thanks

    Delete and redownload those applications.
    (121097)

  • When trying to use software update, get error NSURLErrorDomain error -1100

    I don't know if this is a result of anything I did.  It started happening after I installed the latest version of Garageband.  When I went into that app, and selected one of the instruments, it directed me to use software update to get all the data for the instruments.  That's when I first got the message box.  Later, I uninstalled Garageband, and still the update problem continues.  Obviously, when this problem first occurs, it will have been after installing *some* app, so I have no way of knowing whether Garageband is involved.   I don't think I can update any of my applications until this problem is fixed.
    The full text of the message box:
    An error has occurred
    The operation couldn't be completed.
    (NSURLErrorDomain error -1100.)

    Try this:
    Fix for Software Update
    See Troubleshooting Automatic Software Update in Mac OS X.
    Delete the following files:
    /Library/Preferences/com.apple.SoftwareUpdate.plist
    /Home/Library/Preferences/ByHost/com.apple.SoftwareUpdate.xxx.plist where "xxx" is a number.
    /Home/Library/Caches/com.apple.SoftwareUpdate/ (delete entire folder)

  • Internet Explorer 9 not showing as not installed when using Windows Update - Error: Code 9C48 Windows Update encountered an unknown error.

    I built a few new Windows Server 2008 R2 with SP1 VMs today and ran into a problem where Windows Update is not detecting the fact that Internet Explorer 9 is already installed. Internet Explorer 9 keeps showing up as an available update when
    using Windows Update. When I try to install it as a test I get the error message: Code 9C48 Windows Update encountered an unknown error.
    My normal build procedures include applying all the patches for the OS prior to any other work on the servers. The way I like to do the patching is to do every update other then IE9 in the begininng and once all the other updates have been
    completed, install IE9 and then patch it if there are updates available. I followed this procedure on every build for the last year and I have not run into any issues until today. The only difference today is the latest patches that were released yesterday
    April 10th, 2012. To test the theory that it may be one of the latest patches, I reinstalled Windows from scratch making sure to format the disks and then I installed IE9 right after the OS install without any other updates. Once the
    server was rebooted, I checked Windows Update and Internet Explorer 9 still showed up as update (Not the Cumulative Update which normally shows up after an IE9 install) and yes, I did make sure to click the 'Check for Updates' link before I looked just
    in case. My next test was to patch a couple of the servers I had built prior to April 10th, 2012. Those servers did not have any issues with the latest updates and they are not experiencing the same behavior as the newly built servers.
    I ended up comparing the IE9 Version on the cleanly install OS (No updates were installed except IE9) and the servers I built last week which were patched. The versions are exactly the same.
    My findings above lead me to believe that there is a problem with the latest IE9 install package (which includes the latest cumulative update) and the Windows Update detection component.
    I guess I am looking for someone to report this up the chain to get this fixed so no one else runs into this problem. I know in some cases we may not be able to see additional IE9 updates until this is resolved.

    I just started having the same problem.
    I was creating a new VM in Vsphere from our 2008 R2 SP1 image and it hasn't been updated and repacked in a while, so i have to install about 60 updates, including IE9.
    I went through my normal setup as i had just created 2 VMs and updated them on Monday with no problem.
    I got the same error code as you. The install looks like it installed IE9, but the update is still showing up as available in Windows Update.
    I deleted the VM, created a new one, chose all updates except IE, then did that and it still shows up again.
    Then i deleted the VM, installed just IE 9 and it still shows up as available on reboot.
    I have a script that i can use to reset/clear WSUS cache on the computer, (Software distribution folder, and the windows update log, and recreates a certificate), so i tried that and then rebooted and it still showed up.
    I then decide ok, maybe the Image got messed up somehow, so i started creating a new 2008 R2 install from scratch last night and chose to update just IE9 as the first install. I did that, rebooted and it didn't show up in Windows Updates, so i though GREAT.
    I proceed to kick off the 100+ downloads needed before i left and left the console up.
    When i got in to work this morning, the updater seemed stuck on 31 of 102 updates, this one in particular: KB288516. I rebooted the computer, because it wouldn't stop and just seemed stuck since last night, which these updates should only have taken about
    an hour to install at most. I log back in and sure enough, it now shows Internet Explorer 9 at the bottom of the update list as being needed for install.
    I believe this is Patch Tuesday week, so maybe they screwed up something with the Windows Update detection engine, because it worked fine on Monday when i had to update IE9 on 2 VMs that i created.

  • I am getting error 49 when tring to update Creative Cloud software. Please help!

    I am getting error 49 when tring to update Creative Cloud software.

    I'm getting this error too.  It appears on all products.  When I closedown and relaunch CC Desktop, all products show up to date.
    PS is showing 14.0 x64.
    I have tried a clean install of CC and also used the cleaner tool.  Nothing has resolved the issue.
    I am on Mac OSX 10.8.5.
    Neil

  • I wan't update using itunes, i want to make update using my phone, but when check for an update using software update in setting message appear " can't check for update....."?

    i wan't update using itunes, i want to make update using my phone, but when check for an update using software update in setting message appear " can't check for update....."?

    Reboot the device and see if the error happens again. Updating through iTunes is usually optimal, but the file size differs via Software Update on the device and iTunes (50MB vs ~800MB)

  • My iphone 5 has not prompted me for a software update since ios7.04. When i search for an update it tell me "unable to check for update" anyone have this issue?

    my iphone 5 has not prompted me for a software update since ios7.04. When i search for an update it tell me "unable to check for update" anyone have this issue?

    my ipod is not the newest update possible as i said i tried to update but it wouldnt let me as it wont let me on wifi sources such as safari facebook and other apps which use wifi.all the apps are fully updated

  • When I attempt to use software Update, and am then prompted for my Apple ID and password, my apple ID is not complete and it is 'grayed out' so I cannot change it.

    When I attempt to use Software Update, then go to 'Update All', I am then prompted to enter the password for my Apple ID, however my Apple ID does not come up as complete, and it is 'grayed out' and I cannot change it, therefore it is impossible for me to update my software.  How can I change the Apple ID to the correct ID?

    You need to delete the application and then download it from the desired Apple ID.
    (96010)

  • Tried to buy Aperture 3 and got an error message Aperture can't be installed on "Macintosh HD" because Mac OS X version 10.7.2 or later is required. You can update Mac OS X using Software Update.  Problem is, I had already updated my IMac to Lion OS

    Tried to buy Aperture 3 and got an error message Aperture can’t be installed on “Macintosh HD” because Mac OS X version 10.7.2 or later is required. You can update Mac OS X using Software Update.  Problem is, I had already updated my IMac to Lion OS

    iPhoto 9.3 requires OS X 10.7.4 now. You can use your actual version of iPhoto or upgrade to Lion (or wait to Mountain Lion)

Maybe you are looking for