Odd exchange calender issue

I seem to have an issue with Exchange calendar entries on iOS 4 devices.
Create a meeting in Exchange, set it to not require responses to the meeting. Invite users.
Accept the meeting. Notice now in the calendar on the device, it is now marked as accepted.
Change a field (location, subject) with the meeting request (the meeting requestor does this), send the meeting update to the users.
Now the meeting on the iOS device changes from accepted to no reply.
This is suppose to happen? It stays accepted if the user logs into OWA to look at their calendar, but on the device, it goes to no reply and is grayed out as if it is tentative.
This problem does not occur on iOS 5 though.

Post here:
http://www.microsoft.com/mac/support

Similar Messages

IPhone and Exchange Calender issues persist with 2.1 update

Hi,
iPhone users cannot use the Exchange calender in my organization on their iPhones because of the following and Windows Mobile users do not have the same issue using the same settings. Exchange mail and contact work fine.
1. iPhone does not sync up existing calender events when Exchange account is added
2. Every event needs to be sent as an invitation to the Exchange account used on the iPhone. I did this after the 2.1 update and after a few minutes all the events that did show up from invitation suddenly disappear!
3. The iPhone cannot invite people to meetings. And if an event is created (for your own viewing) on the iPhone, if you edit the event it will not update on the Exchange side
4. After applying the 2.1 update I no longer receive invitation notices on the iPhone. The event just shows up in my calender but again, they disappear after a few minutes. The only events that stick are the ones I create on the iPhone and changes to that event to not reflect server side.
Has anyone come across this issue an if so are there any solutions? Thanks.

I actually discovered that the fix for the iPhone calendar not syncing correctly was either a recent MS update (We are using Exchange 2003) and or adjustment to Sites and Services in AD. So my fix above was not the fix after all. Some iPhone users during the last two weeks all of a sudden noticed their calendars were syncing and events were filled in.
From our Windows IT Admin when I asked them what they did:
“We ran Microsoft updates weekend before last, and we adjusted the Sites and Services part of AD so that our Domain Controllers are associated with their correct location (this change rendered RPC over HTTPS inoperable (it worked about 50% of the time prior to this change, based on which DC you authenticated against)).”

I have a personal email calendar kept on Outlook, I also have an Exchange calender on outlook. I want to sync both calendars with my Iphone 5 /6.1.2 but ITunes only sees the exchange calendar. How can I get Itunes to see both calendars

I have a personal email calendar kept on Outlook 2010, I also have an Exchange calender on Outlook. I want to sync both calendars with my Iphone 5 / 6.1.2 but ITunes only sees the exchange calendar.
How can I get Itunes to see both calendars?

Hi,
you don't need MobileMe or anything fancy. I personally sync my Outlook calendar and my Outlook address book with three computers (two at the office and one at home)and besides I run Office 2003 on one, Office 2007 on the other and Office 2010 on the third, so it can't get more complicated than that, but it works 100%.
First sync Outlook with iTunes on one computer, having done that when you try to sync it to another machine, iTunes will recognize that it is synced with another computer and ask you if you want to merge the data, say yes, That's all there is to it.
It does not work for music as you rightly say but as far as Calendars and Contacts are concerned it's flawless and transparent.
If you hit a snag talk back to me.
Cheers.

Checklist for Exchange Certificate issues

Checklist for Exchange Certificate issues
1.
Why certificate is important for Exchange and What are Certificates used for
Exchange is now using certificates for more than just web, POP3, or IMAP. In addition to
securing web services, it has also incorporated Transport Layer Security (TLS) for session based authentication and encryption.
Certificates are used for several things on Exchange Server. Most customers also use certificates
on more than one Exchange server. In general, the fewer certificates you have, the easier certificate management becomes.
IIS (OWA, ECP, EWS, EAS, OA, Autodiscover, OAB, UM)
POP/IMAP
SMTP
2.
Common symptoms for
certificate issue
Here we can see three different types of the certificate warning, mainly from the Outlook
side.
a.
Certificate mismatch issue
b.
Certificate trust issue
c.
Certificate expiration issue
3.
Checklists
In this section, checklists will be provided according to the three different scenarios:
Certificate Mismatch Issue
[Analysis]:
This issue mainly occurs because the URL of the web services Outlook tries
to connect does not match the host name in the certificate.
[Checklist]:
Firstly make sure how many host name in your certificate the certificate. Run “Get-ExchangeCertificate | select certificatedomain”.
Secondly, check the web services URLs which Outlook are trying to connect to. Run “Test Email AutoConfiguration”
In this scenario, you need to check the host name for the following services:
Autodiscover
EWS
OAB
ECP
UM
If any of the urls above does not match the one in the certificate, refer to the following article to change
it via EMS:
http://support.microsoft.com/kb/940726
1.
Do not forget to restart the IIS service after applying the changes above.
2. Make sure a valid certificate is enabled on the IIS service.
Certificate Trust Issue
[Analysis]:
For the self-signed and PKI-based (Enterprise)
certificates, they are not automatically trusted by the client computer or mobile device, you must make sure that you import the certificate into the trusted root certificate store on client computers and devices. On the other hand, Third-party or commercial
certificates do not have this problem. Most commercial CA certificates are already trusted because the certificate already resides in the trusted root certificate store. Because the issuer is trusted, the certificate is also trusted. Using third-party certificates
greatly simplifies deployment.
[Checklist]:
If it’s an Enterprise CA certificate, manually install the root certificate to the “Trusted Root Certification Authorities” folder:
If it is a 3<sup>rd</sup>-party certificate, first remove and reinstall the certificate. Check whether the Windows Certificate Store on the local
client is corrupted. If it still does not work, please contact the third-party CA support to verify the certificate.
Certificate Expiration Issue
[Checklist]:
When a certificate is about to expired, we just need to renew it by referring the following article:
Renew an Exchange Certificate
http://technet.microsoft.com/en-us/library/ee332322(v=exchg.141).aspx
To avoid any conflictions, it’s recommended to remove the expired certificate from the certificate store.
[How to set a reminder to alert the administrator when a certificate is about to expired]:
It’s easy to fix the certificate expire issue. But it should be more important to set a reminder before the
certificate expiration. Or there can be a large user impacts.
Generally, the Event ID “^(24|25)$” will appear in Application log when a certificate is about to expire.
If it’s not quite visible, we can refer to the following solution:
http://blogs.technet.com/b/nexthop/archive/2011/11/18/certificate-expiration-alerting.aspx
OWA certificate revoked issue
[Analysis]:
IE
includes support for server certificate revocation which verifies that an issuing
CA has not revoked a server certificate. This feature checks for CryptoAPI revocation when certificate extensions
are present. If the URL for the revocation information is unresponsive, IE cancels the connection.
[Solution or workaround]:
1. Contact CA provider and check whether the questioned certificate is in the Revoked List.
2. If not, check whether the certificate has a private key.
3. Remove the old certificate and import the new one.
Workaround:
IE Internet Options -> Advanced tab -> Clear the "Check for server certificate revocation"
checkbox.
4.
More References
Digital Certificates and SSL
http://technet.microsoft.com/en-us/library/dd351044(v=exchg.150).aspx
More on Exchange 2007 and certificates - with real world scenario
http://blogs.technet.com/b/exchange/archive/2007/07/02/3403301.aspx

(Reported previous post with link to SIS package to moderator)
This is not the correct SIS package for the N73. The package shown is for S60 3.2 devices, but the N73 is not S60 3.2, I believe it is S60 3.0.
Most features may work with this SIS, but if you experience strange problems, try using the S60 3.0 version.
But there are no significant difference between 2.5.3 and 2.5.5 with regard to attachments. The only changes were with localization (languages).
At this point, try 2.7.0 which is out now:
http://businesssoftware.nokia.com/mail_for_exchange_downloads.php
Make sure to pick the right phone on the drop down list. It does matter! There are 4 different packages. This list makes sure you get the right one.
I have seen some issues with attachments not completing that seem to be carrier dependent. You can test this my using Wifi (if possible).
Message Edited by m4e_team_k on 28-Sep-2008 12:25 AM

Exchange 2013 Issue: Outlook 2010 auto populating the From Tab when forwarding email

Exchange 2013 Issue: Outlook 2010 auto populating the From Tab when forwarding email
I am running Exchange 2013 and I have an end user who connects to it via Outlook 2010. All was going well till he went to forward an email and he noticed that the From button appeared and auto populated the sender's email address.
I have clicked the Empty Auto Complete List in Outlook's Send messages... still displayed the From tab when forwarding.
I recreated the profile in outlook... same thing.
I created the profile with outlook 2013... same thing.
There is only one user profile setup in Outlook.
(I know the from tab usually appears when you have multiple profiles setup in Outlook and/or when you configure the "From" tab.)
I opened the end user's email in Exch 2013's OWA... what was different here was when I clicked on the email and it opened, it did NOT have the Reply or Forward option... and it displayed as a "Draft" email.
Does anyone have any ideas?

So are you saying that the from button is filling the option with the original senders address (eg the person who sent the message to your user), or that it's filling in the your users address (in which case I don't understand what the issue is, since
it IS going from your user)?

Exchange Rate Issue ( Ditect & Indirect Quotation )

Dear,
Alll Experts.
I am stuck up at one level , that is Exchange Rate issue.
User is creating shopping cart in SRM, Local Currency is USD and the goods is ordering from Canada ( CAD ).
While doing this amount is getting calculated   in - ( Negative ), And it is going to wrong approval for shopping cart approval.
When I see the TCURR table I am seeing there as negative sign in exchange rate because it is maintained in Indirect Quotation.
I want to calculate the same amount in postive figure.
How this can be achieve? If I maintain the same in direct quotation it will calculate positive but final amount will be bigger which is not proper one.
Experts guidance will be helpful.
Regards,
Sharvari Joshi.

Hi,
I gave the OB08 entries, not sure if you wanted me to explain the logic. Here it is..
Maintain 'Indirect quotation' from Local currency(USD) to Transaction currency(CAD) and 'Direct quotation' from Transaction currency(CAD) to Local currency(USD).
Direct quotation is where the cost of one unit of foreign currency is given in units of local currency, whereas indirect quotation is where the cost of one unit of local currency is given in units of foreign currency.
Your local currency is USD:
- Direct exchange rate: 1CAD = 0.92819 USD
- Indirect exchange rate: 1USD = 1.08238 CAD
The following settings have been made in the standard system:
- Direct quotation: ' '
-   Indirect quotation: ' / '
Direct exchange rates do not have a prefix.
Your local currency is USD. You enter a business transaction in the transaction currency CAD. Until now, you had to use direct quotation to enter the exchange rate (1CAD =0.92819 USD). If you have defined '/' as the prefix for indirect quotation, you can also enter the exchange rate with indirect quotation (1 USD = 1.08238 CAD) by entering '/1.08238' in the exchange rate field.
Direct or indirect quotation can be maintained as the standard form of quotation for a certain currency pair. You use:
         - '1' for direct quotation
         - '2' for indirect quotation
If a standard form of quotation has not been specified for a currency pair, the system automatically uses direct quotation.
You make the settings in the IMG: General Settings -- Currencies -- Set Standard for Direct/Indirect Quotation per Currency Pair.
Thanks
Ganesh

Outlook with Exchange connection issues

I am implementing a security policy which includes blocking all outbound traffic on the firewall of our network (Except normal 80, 443 etc). It seems
that if I apply this, some users aren't able to connect to exchange. This appears to be related to Outlook Anywhere. What ports would I need to allow to prevent this connection issue?

Hi
As per the information and details provided by you, to solve the Outlook with Exchange connection issues, Please follow these steps: -
Microsoft introduced
RPC over HHTP as a better way for Outlook client to connect to Exchange. The MAPI connections still use RPCs, but they encapsulate those with an HTTP connection. Since that HTTP connection is secured using SSL, it is may be
more accurate to call it RPC over HTTPS. These connections only require connectivity
over TCP port 443, which as you know is assigned to HTTPS and is normally open by
firewall admin for web servers.
Outlook Anywhere wraps
Remote Procedure Calls inside an HTTP layer to allow connectivity with the Exchange server. This simplifies the firewall administration process requiring only
the SSL port 443 to be opened to the CAS (Client Access Server) instead of several ports to the actual Mailbox Server (MBX).
I hope this information will be helpful for you.
Thanks and regards
Shweta@G

ICal denys all of exchange calender events. How do I prevent declining??

Every time I open ical and it syncs with my exchange server from work it declines every appointment I receive. When I first installed it declined every appointment from my hire date!! I like ical but will have to remove my exchange calender if a fix is not there. Help!!

Could it be the parentheses themselves? My Macbook came loaded with Yosemite so I'm not sure if my calendar is the same as yours, but that was the first thing that occurred to me. Perhaps the system is reading the time differently because its enclosed in parentheses.
My problem is a bit different, but also involves times. When I add a new event to the calendar, it puts in a time whether I want one or not. I can't find anywhere to change that option, but then this is my first Mac so I'm pretty clueless in general. Hopefully we can both find something that helps. In my case, classes would probably be the best plan.

The recent software update on my HTC One has caused errors with Exchange ActiveSync issues. Calendar, mail and tasks sync fine but contacts won't sync. How do you correct this?

The recent software update on my HTC One has caused errors with Exchange ActiveSync issues. Calendar, mail and tasks sync fine but contacts won't sync. How do you correct this?

I had the same problem. Here is what worked for me. Open the mail app and delete your exchange account (Settings > Delete Account). Then re-add your Exchange account. After this my Exchange contacts showed up again.

Exchange 2010 - Issues after rollup update installation.

Exchange 2010 - Issues after rollup update installation.
We are having issues since we installed SP3 Rollup updates 1, 2, 3, and 4.
Issue1 - People get an error messages constantly popping up when they access our webmail. The error messages are:
An unexpected error occurred and your request couldn't be handled. and
Your network connection is unavailable. Please reconnect and try again.
Issue2 - When I open the Exchange Management Shell I get the following error:
Failed to connect to an Exchange server in the current site. Enter the server FQDN where you want to connect.
Issue3 - We have been using third party software to filter spam email. It is installed on our Exchange server. Since the updates it has not been working and we have tons of spam coming through. I dont think that this issue is that important at the moment and
hope that it will be fixed after resolving issues 1 and 2.
We uninstalled all four rollup updates in hopes that everything would go back to normal but it hasnt. We still have the same issues.
Currently we are running Exchange 2010 SP3 on 2008R2 SP1.
Please help.
Thanks.
Greg

Hi,
Based on the description, you got the error below when you tried to accessed OWA after rollup update installation.
"An unexpected error occurred and your request couldn't be handled, and Your network connection is unavailable. Please reconnect and try again."
For this issue, I recommend you check the OWA virtual directory to see if "Redirect requests to this destination" is checked. If it is checked, please uncheck the option. Then please restart IIS service to check the result.
Open IIS Manager -> owa -> HTTP Redirect -> uncheck "Redirect requests to this destination:"
Best regards,
Belinda
Belinda Ma
TechNet Community Support

Exchange 2013 issues - (new send email Stuck in Drafts not send)

Exchange 2013 issues - (new send email Stuck in Drafts folder not send)

I am also having this issue.
server 2012 VM with exchange 2013. plenty of resources, more than recommended so cannot be a BAck Pressure issue especially as no clients are connected yet.
In the early stages of setup and testing, mail sent to other mailboxes worked fine in outlook 2007 and OWA but after a few issue that developed and are now resolved, any e-mail send within outlook or OWA just goes straight into the drafts folder.
I tried, DNS setting changes under roles, on the server, on DNS server, MX DNS records, increased resources, looked at received connectors, changed and even deleted send connectors as this is not required for internal mail. Tried changing authentication
types but then outlook won't connect to, staying with Basic Auth.
Have not been able to test inbound e-mail as this is going to replace a production server and is not ready, although I could probably simulate a route from another server and push e-mail to it. Will try tomorrow.
I have spent about 20 hours trying to figure this out and made probably 40 changes. Change, test, rollback etc. Been searching through loads of forums and technet sites all with no help.
All services are started, server has been rebooted several times.
It is also an AD server and has both Exchange roles installed. There is no reason why it should not work. This is so frustrating, we don't have these issues with the now end of life Scalix, or MDaemon or Zimbra. Pity the client wanted a Microsoft solution.
To be honest there are not a lot of things that cannot be changed in ECP although there is more under exchange powershell however I am not familiar with all the commands yet. I have resorted to watching training videos even though I am a seasoned IT Pro, although
not so much with exchange it seems.
I have seen many people have this issue on Exchange 2007, 2010 and 2013. Someone must know how to resolve this or find a work around?
So far I have an expensive solution the client has purchased that I cannot get running properly.
Aside from this issue, I really like the new Server 2012 and new Hyper-V.
I was about to install Exchange Server 2013 on a physical machine due to this f#ckin' issue. But a post for the DNS change has saved my life:
http://social.technet.microsoft.com/Forums/en-US/exchangeserverpreview/thread/04c0147b-f4e3-4041-a566-310854e71068/ (rafael9908's answer)
And thanks Jesper Bernle for excellent info provided by your link.

IPodTouch 3G ms exchange calender sync// Kalender Synchronisation

Hi,
seit einiger Zeit funktioniert die Synchronistaion meines Hotmail-Kalenders (MS Exchange Account) mit meinem iPod (iOS 5.1.1) nicht mehr. Es wurden keinerlei Einstellungen geändert, keinerlei Sicherheitseinstellungen gedreht oder Ähnliches: Sprich, von heute auf morgen hat es, ohne jegliches Zutun meinerseits, nicht mehr funktioniert. Ich habe bisher folgendes versucht:
1. Neustart des iPods.
2. Zurücksetzen des iPods.
3. Löschen und Neueinrichten des Accounts.
Nach 3. erkennt er über den Account nun gar keinen Kalender mehr, obwohl nach Eingabe der korrekten Accountdaten die Registrierung des Accounts erfolgreich verläuft.
In der iPod-eigenen Kalender-App erhalte ich die Anzeige "keine Kalender".
Ich bitte dringend um Hilfe - weil ich auch wirklich keine Idee mehr habe.
Mit bestem Dank!
Paul

Maybe:
IOS 6 sync exchange calendar issue: Apple Support Communities
iPad Mini and Exchange Issues Using...: Apple Support Communities

N66-1 Exchange calender?

I have set up mail for Exchange on my new N66-1 but the Calender do not sync with my exchange calender automaticly. How do I set this up? I can not find anything under calender settings.
Replaced my buggy Nokia N97 with a HTC Hero.
Besides the camera and the real keyboard the HTC Hero pawned the N97 on every level.

I am still stuck with this problem. This is my bosses phone, and I really need to solve it. Do anyone have any clue as to how to sync the calender with Exchange?
Replaced my buggy Nokia N97 with a HTC Hero.
Besides the camera and the real keyboard the HTC Hero pawned the N97 on every level.

Exchange sync issues

I'm having an issue where my Exchange email seems to stop working on a random basis. I have to delete my account and then re-add it in order to start receiving emails again. My gmail and google apps accounts sync just fine. I've checked with our IT department, and other users aren't having the same issue. My phone worked fine up until about a week ago. I deleted the certificate and re-installed it, just to be certain. Any thoughts? Any known issues I should be aware of? Anyone else experiencing this problem?
Thanks

I'll have to check with the IT department. Unless they have upgraded recently, we are using exchange 2003 SP1. I'll also ask about the test account.
As far as I know, and as far as IT knows, I'm the only one using WebOS. The IT department only "supports" Blackberries & iPhones. I prefer the Pre, and as long as the exchange sync works, I'll stick with it.
I have had the issue happen again several more times. It isn't an "8 am" exactly issue. The other morning I received emails up until 9 or so, then stopped.
I have tried just re-entering my password and that didn't seem to work. Maybe I need to give it a little more time. Maybe I should change my network password and see if that makes any difference. Perhpas that is where the sync "disconnects". Since exchange email works for iPhone users, I have to think it is a WebOS specific issue, versus an exchange issue, or perhaps I should say a WebOS - Exchange connection issue, as opposed to an "exchange" issue.
I only asked about the logs because I was involved with a previous exchange sync issue and worked with the support techs several times, and they have asked for several logs.

Siri calender issue

I am using iPhone 4S with German localisation.
I have a problem with Siri when I ask Siri to tell me my appointments today or tomorrow or on any other day.
Siri's answer is (translation): "I'm sorry there is something wrong there. can you please try it again". I know that the same question is working well on other iPhone 4S.
I am using an Exchange and iCloud calendar as well as an subscribed calender.
Has anyone a solution for this issue?

No chance.
Siri recognises my question and shows this correct on the screen, following by the comment "Searching in your calendar" and then the answer " I'm sorry, there is something wrong there, can you please try again" (original wording in German "Tut mir leid, irgendetwas stimmt da nicht. Kannst du es bitte noch einmal versuchen".
I assume that there may be a reason in the combination of different calendars, but I have already deactivated my exchange-calendar, but without success. I have also deteted my 2nd calendar app "miCal", also without success.

Odd exchange calender issue

Similar Messages

Maybe you are looking for