Odd frames when printing transparency PSD on black background on Illustrator CS4

I don't know why but any PSD file that have transparency in it and placed on an illustrator document, printed with those frames around it (see example JPEG file that  I added). I tried to print directly to the printer and got those frames. I tried to create a postscript before and then PDF throe the distiller and still, the PDF print those frames. You can see the PDF that I added and examine it. You will see under the "output preview" that the parameters of the black background is the same around.
What is that?!

I can't use RGB profile if I want to be precise with my works.
I found the problem and how to fix it.
I think it is a problem with the RIP of the printer. The printer receive vector, raster and transparency object together and needs to flatten to a single image - it doesn't succeed.
So, if I send to the printer from Illustrator, under "Advanced" I use customize pref. by tuning it to all raster and not vector at all the print printed good.
It's so primitive and stupid that with a new printer I still need to do the RIP with the application.

Similar Messages

  • When i turn on my Ipad air In the cornors of the Black Screen It has white stuff near the top bottom  left and Right   When it's all it turned on it's fine But when I go to a black Background It  does the Same is this normal?

    When i turn on my Ipad air In the corners of the Black Screen It has white stuff near the top bottom  left and Right   When it's all it turned on it's fine But when I go to a black Background It  does the Same is this normal
    It
    I
    O

    when I turn on my ipad and the black screen comes on I have a slight white light running along the bottom meaning the whole screen is not black. Is ths normal.
    better details Sorry
    N

  • Yosemite place psd or tif images in Illustrator CS4.

    I have just upgraded to Yosemite and cannot place psd or tif images to Illustrator CS4. I need a high resolution image with a transparent background for print. Surely there is a fix for this.

    In Illustrator CS2, the individual Spot Channels from Photoshop used to become Opacity masks when imported.
    In Illustrator CS4, they are not converted to Opacity masks. Your spot colors are still there - look in the Swatches panel. There is a Spot channels image in the layers panel with 100% Multiply blend mode applied to it.
    So it is not correct to say that it is no longer possible to bring spot channels from Photoshop into the Illustrator CS4. See the comparison snapshots below.
    Hope this helps.

  • Repositioning photo in frame when printing small image to A4 paper

    I'm trying to print a passport sized photograph onto a sheet of A4 photo paper, but when I resize the image, the program places it in the centre of the frame when I view it in print preview. 
    I would like to reposition the image, to the top left corner of the page for example, in order to save photo paper.  I can't find a way to do this in iPhoto 9.5.1 or in any of the other photo apps I've downloaded form the App Store, and don't really want to shell out on Adobe Photoshop.  I'm using Mavericks if that makes any difference.
    Any ideas or advice would be gratefully received.  Thak you in advance.

    You'll need a 3rd party image editor  that supports layers or you can use Pages.  Open pages to a blank, letter sized page.
    Drag the photo from the iPhoto window to the Pages window, resize as necessary and drag to the upper left hand corner of the page.  then Print.  If you have Word you can do essentially the same thing.
    Some Image Editors That Support layers:
    Photoshop Elements 11 for Mac - $79
    GraphicConverter - $40
    Rainbow Painter - $30
    Imagerie - $38
    Acorn - $50
    Pixelmator - $60
    Seashore - Free
    GIMP for Mac - Free
    Xee 2.1 - free

  • Odd characters when printing PDFs from iMac (10.6.3)

    When printing a PDF from the iMac (new 27") above, we get odd characters printed down the right margin of the page. These characters do not appear when viewing in either Acrobat Reader or Preview. This also does not happen when printing from Parallels. The printer is an HP Officejet 6000. Just to throw an added wrench into this, the problem does not happen when printing from a new Mac Mini (also 10.6.3) to the same printer. Any solutions?

    Check whether the fonts installed and active are the same. In particular, look for font conflicts in Font Book, and resolve them so both computers are using the same versions.

  • Copying images with transparency produces a black background.

    When images are copied from Firefox and pasted elsewhere (Paint, PSP, Photoship, etc.) any transparency becomes opaque black. This makes it difficult to edit the image if the transparency was near black pixels. Is there any way to change the colour to something else, or at least, white?

    No, you will have to save the image to disk and open the file in your image editor. You can try if it works if you drag the file in the editor.

  • Transparent Flash has black background

    I have a video flash file created in Premiere Pro CS4 which I keyed out the background, exported as a FLV/F4V with an encoded alpha channel. I place the flash on a JPG in Dreamweaver CS4 and want the movie to run transparent, but I always get a black box surrounding my movie. I use the "wmode" as "transparent" in the flash dialog box, but this does not eliminate the black background around the movie. Any suggestions?

    Transparency with *.flv's works for me when I place the background on the bottom layer in the Flash program project (*.fla) and place the video on the layer above, in the Flash program project. Publish this "Flash Movie" from Flash and cut and paste the Flash code from the "Published" HTML page into either the table cell or div on your final Dreamweaver page depending upon whether you are building an "old school" table based page or a CSS based page.
    If you are creating one of those "floating" over the top, Web page movies, someone in the Flash or Dreamweaver forum should be able to help you with that.
    Also, in Premiere, you should be working in a "Desktop mode" sequence with "Square pixels" selected.
    Here are the settings to get the flv to encode with an alpha channel:

  • How do you create transparent text with black background in LiveType for use in Final Cut??

    I would like to bring in movies or projects from LT that have transparent text ("alpha" layer?) and a solid background. The goal is to layer fcp video under the animated text generated in LT so that the video layer fills the transparent text layer. I know you can matte to movie or image in LT, but would prefer to do this in FCP. Long story short, need a text transparency from LT. Thanks!

    Video track 1: Your background.
    Video track 2: White text on a black background.
    Video track 3: The fill image for the letters.
    Right click on the clip on track 3. From the drop down menu, choose Composite Mode > Travel Matte Luma.

  • PSD Spot Color Channels in Illustrator CS4

    Hi all.
    Screenprinter here. Trying to migrate my way into CS4. No such
    luck so far.
    Way back in Illustrator CS2 I used to be able to place a PSD file with Spot Channels,
    and have each channel show up as a separate object in Illustrator. This was incredibly
    useful, nay, necessary for creating/laying out separations and adding vector work.
    From what I've read and tried, this is no longer possible in CS4, which leaves me running two versions,
    which is no fun.
    I suppose my question is, has anyone come up with a workaround for this, or does the newest
    release support this type of operation? From reading the boards, I've found that I'm not nearly
    the only person who needs this feature, and so would hope that there is an alternative to
    running CS2 still.
    Us poor lowly screen printers get dumped on by nearly all Adobe products in terms of usability
    (ever shoot the stock reg marks from photoshop?) give us this one feature!

    In Illustrator CS2, the individual Spot Channels from Photoshop used to become Opacity masks when imported.
    In Illustrator CS4, they are not converted to Opacity masks. Your spot colors are still there - look in the Swatches panel. There is a Spot channels image in the layers panel with 100% Multiply blend mode applied to it.
    So it is not correct to say that it is no longer possible to bring spot channels from Photoshop into the Illustrator CS4. See the comparison snapshots below.
    Hope this helps.

  • Flash frame when printing to tape?

    Ok, this has never happened to me before, I have an hour long show. The whole project is edited and rendered out in one quicktime movie.
    I'm using the final QT movie to edit to tape. At the end of a dissolve I am getting a Flash frame, the funny thing is its only happening on the tape. I have gone through the sequence frame-by-frame and there is no indication of an added frame or
    bad edit anywhere. Does anyone know why I would get a Flash frame only when I print to Tape?

    are you monitoring on a NTSC monitor or your computer. I've seen this when the flashframe is on a field the computer monitor isn't showing, but the ntsc mon will show it. The other thing is when your deck is brought out of record by hitting stop without rolling enough black prior to stopping this can happen but it sounds like you are seeing this in the sequence somewhere not at the end

  • User gets odd behavior when print previewing calendar

    User calls with an odd problem.
    She is using 32 bit IE 9 with our SP 2010 farm.
    She goes to her department calendar. She sees events.
    She presses Print Preview. No events are shown on the page.
    She tries to export the data to Outlook - it tells her there is too much data.
    She calls me.
    I look - her default view is running into the resource throttling of the farm. So I try to create a unique view that only shows this week's events.
    It works fine for me. Print preview and printing work as well.
    When she looks at it in her browser, it works fine.
    When she tries to print preview - no events show up on the preview page.
    She tries to export from the new view - Outlook gets no events.
    She is using IE9, so the IE7 comments in old threads are not relevant.
    I set the web part configuration to 12 inches as one conversation suggestions. That doesn't help.
    Does anyone else have any ideas of things to try?

    When I look at the custom calendar within SharePoint Designer, the page has a ListView Web Part but not an XsltListViewWebPart.
    I have tried several times to step through blog entries that describe editing the page, setting the view of the web part, etc. At one point whatever I tried turned the calendar view into a list view ... sigh. I created a new calendar view and made it
    the default.
    I have asked the user to try the print preview out today to see if it works for her after I created the new view.
    The really odd thing about all of this is that at least 2 people don't have the problem with not seeing event data in the print preview.
    It _almost_ sounds like some sort of machine specific issue she is having.
    I wonder if I should ask the admins to repair Office 2010 on her machine to make certain the DLLs are all working properly.

  • Drop Frames when Printing to Video

    I know there are a lot of topics on drop frames, but I couldn't find any that met my specific set of circumstances.
    My video plays fine and there is no red bar indicating that something has to be rendered. However, when I try to print to video, ten seconds in, the project is aborted and a drop frame error is given.
    Is there anything I can do to get around this?
    Thanks.

    I don't know the specs of your machine however...
    Alternatevely you could open the RT dropdown menu
    and turn playback video quality and playback frame rate to the minimum and close
    other projects.

  • Drop frames when printing to tape !

    HI
    I would like some help please !!!
    The problem is when I print to tape I keep on getting drop frames
    Here is the run down
    The video is normal some where around 1hr 30 min 2hrs long
    3 layers maximum
    The audio is four layers
    I have tried “Nesting all items” and then printing to video (it last a little longer but I still get the same problem)
    My system stats are as follows
    G5 Dual 2.7 with 3.5GB Ram, 10.4.8, FCP 5.04 650GB Internal HD and 900GB Sata HD
    Thanks

    Maurice,
    make sure all your audio is 48K
    close all sequences other than the one you are using to print to tape
    Try exporting your project as a QT movie then place it back on a new timeline and print to tape that way
    make sure your hard drives are not going to sleep
    try recording from the timeline rather than using the print to tape function

  • Exracting a transparent image from black background

    Hey all! A little bit confused on a project. I have an image that is semi-transparent. I am able to take the black out of the background around it, but am unsure about how to remove the acutal background from behind the image. I need to superimpose this image onto another-hence the background change. Any tips or ideas? I have the newest version of PS. Please help!
    Kind regards,
    Ashley

    Hi,
    I am moving your post to the Photoshop General Discussion forum. You should get a response there. (This forum is specifically for the Edit your first photo page.)
    Best regards,
    Randy Nielsen
    Product Integration Manager, Creative Cloud Learning & Training
    Adobe

  • Flash player updated 11 ,transparent swf become black background.

    What should I do?
    Now, the background is not transparent!!!
    Click here to see the issue:

    Please vote to fix this issue:
    https://bugbase.adobe.com/index.cfm?event=bug&id=3019125
    https://bugbase.adobe.com/index.cfm?event=bug&id=3017111
    https://bugbase.adobe.com/index.cfm?event=bug&id=3018116
    Notes:
    1- Using Internet Explorer 9 + Flash Latest Version (11,0,1,152)= Problem with Flash (Transparent become Black)
    2- Using Internet Explorer 9 + Flash Older Version (10,3,162,28)= Flash is OK
    3- Using Internet Explorer 8 + Flash Latest Version (11,0,1,152)= Flash is OK

Maybe you are looking for

  • Multiple apple id's, Multiple apple id's

    Is it feasible to use two or more Apple ID's (essentially separate iTunes accounts) on a single Apple TV? I want to be able to watch movies etc from my partners account & vice versa without needing to login to the relevant users account on the iMac?

  • Xslt ecc6  ISO-8859-1 problem when download xml file

    Hello, i create an ABAP test program: *& Report Z_ABAP_TO_XML                                             * *& Write the data from an internal ABAP table into an XML document, * *& and write it onto your frontend computer                         * RE

  • My editor has stopped working in Photoshop Elements 10!

    I keep getting a "RUNTIME ERROR PROGRAM C:\ PROGRAM FI..." and then it reads THIS APPLICATION HAS REQUESTED THE RUNTIME TO TERMINATE IT IN AN UNUSUAL WAY" everytime I try to access the editor program in Photoshop Elements 10!  Shuts down every time,

  • I want to sell my IPhone 4S.

    I purchased my IPhone 4S with Verizon 2-1/2 years ago and I want to sell it to an AT&T user. Verizon stated that I could not do this as the phone is only availble to be used on the Verizion network. Can someone offer a suggestion what steps I can tak

  • Microsoft Office Product Key

    Hi I am planning on getting a new hard drive for my macbook pro and I can't find my Microsoft Office 2011 product key (or installation disk) If i want to have office on the new hard drive, do I simply have to copy the Applications (and related files)