Odd Full-Screen Distortion Issue

Can anyone explain this? This is the second time this issue has happened. The first time it happened was a few weeks back. You cannot use the computer when this happens; force quitting accomplishes nothing. Fortunately, however, you can take a screen shot. I was using the 9600GT to avoid the screen flickering associated with using the 9400GT.
http://www.flickr.com/photos/40285585@N02/4593293040/
http://www.flickr.com/photos/40285585@N02/4592673729/

I was running Safari when this issue occurred. Most likely, Mail, Microsoft Word, and iTunes were open as well.
In the two times this has occurred, the screen will start will a few dots all over the screen like snowfall, and then it will get progressively worse (as seen in the pictures).
The computer will completely freeze for approximately a minute (force quit accomplishes nothing as the box doesn't show up), and after a minute, once you can force quit, you can move the mouse but opening another application like Activity Monitor will take a very long time. I usually force the computer to shut down before that point is reached.

Similar Messages

  • Macbook air mini dp output resolution / full screen app issues

    I've successfully connected my new macbook air 13" to my LED tv with a mini DP to hdmi adapter + hdmi wire. I am able to get video and audio (obviously.)
    My issue is that no matter when resolution I try (1080p, 1080i, 720p, etc) and wether I am "mirroring" the display or "extending" the display,
    My samsung 46" LED tv can not get full screen there is always black bars on the left and right.
    When I connect my PC via VGA wire  there are no bars and it is in full land scape view.
    Also I've noticed in lion that full screen apps show up as the "linen wallpaper" on the second display.
    the only way i can slightly alleviate the problem is full screening a video within youtube but not within the OS it self... even then there is still black bars which is weird because when i use the TV as a extended monitor the wallpaper is using the whole display just full screen video has black bars.
    I am unable to get 1920 x 1200 output display to my HDTV is this possible? is it my mini DP to hdmi adapter that is at fault?
    thanks in advanced to whoever helps sorry about the long post my brain is scattered on the issue because my VGA connetion works fine i don't understand why HDMI + mini DP has worse resolution...

    No, it doesn't list the resolution explicitly like that - the top few items in the list are "480i", "480p", "720p", "1080i" and "1080p", each with a small TV icon to the right. Non-television resolutions follow, and are listed with explicit pixel dimensions (and no TV icon), but the list stops at 1440x900, the native resolution of the MacBook's built-in display; it doesn't list resolutions higher than that.
    Needless to say, I've tried every setting in the entire list, and they all suffer from the same problem of displaying shrunk down on the plasma TV with a margin around the desktop.
    I wonder if the difference between your Display control panel and mine is that I'm running Snow Leopard? (Sorry - no screen grabs to show, I'm at work right now)

  • Full screen video issue (YouTube outside of the app?)

    i just recently upgraded from an iPhone 5 to an iPhone 6 Plus and everything has been going great. Lately, though, I have been having issues while watching full screen embedded videos (typically from YouTube) in which I am unable to select Done when the video has ended. It reacts to my touch but fails to do anything but light up. If I double tap Done it acts like it would if I had pressed the middle of the screen. When this issue occurs the amount of time lapsed during the video also will have stopped updating at some point.
    I have not had any issues with videos in the YouTube app, nor is this an issue on my roommates iPhone 6 or our iPad Airs. This is clearly a software issue, but I'm clueless. All of the other units are running iOS 8.1.2 as well. Any help would be appreciated. Thanks!

    Hello Kareem-biomedical,
    You may need to fully restore your device as detailed in the following article.
    iOS: Back up and restore your iOS device with iCloud or iTunes
    http://support.apple.com/kb/HT1766
    Cheers,
    Allen

  • Full screen mode - Issue with Aperture freezing

    Hi I have an issue with Aperture 3 freezing if I send an image to a plug-in or external editor while in full screen dual display mode. I have to exit full screen mode first and then send to photoshop/external plugin.
    It is not a huge deal and a simple workaround but if I forget to do it Aperture will freeze and I will have to force quit the application.
    Any thoughts or suggestions welcome.
    Thanks!

    Just send a comment to Apple via "Aperture→Provide Aperture Feedback".
    IME, both full-screen mode and dual-display mode have some rough edges. (I don't expect any improvements until OS 10.7, which is widely reported to include a full re-design of full-screen mode.)

  • Full Screen + Html + Flash Issues

    Hello, I have an Air app that will be running in Full screen
    interactive mode. Inside this app, I have an html control that is
    setup to view a page of mine that contains a flash file. The flash
    file is setup to fill the page and runs great in ie and firefox,
    but when i run the air app, the screen flashes and jumps all over
    the place and is very glitchy, if I bring it down to less than full
    screen it returns to normal, then glitches out again when i
    maximise...what do you recommend I check out with this odd issue?
    The following url is my flash page link:
    http://www.video-postcard.com/mapApp.aspx?customerId=47
    Thanks!

    Hi,
    SWF content in HTML has some limitations in AIR as mentioned
    in the
    AIR
    release notes. But this seems to be a new issue.
    If you can create a minimal sample that reproduces the issue,
    it would be great if you could submit a bug report at
    http://www.adobe.com/go/wish

  • IPad IOS 8.1 full screen safari web app display issue

    My company produces a web app that is intended to be used from the iPad's Full Screen Home Screen launch.
    we are using the tags:
    <meta name="apple-mobile-web-app-capable" content="yes">
    <meta name="viewport" content="width=device-width, initial-scale=1.0, user-scalable=no" >
    Since taking the updates to IOS 8, 8.1, & 8.2, when the app is launched in full screen mode from the home screen, the iPad's top line including the text "iPad", its signal strength, VPN status, current time, battery life, and blue-tooth indicators are superimposed on the top line of every page - making it difficult to read that top line of data coming from our app.
    Additionally, there appears to now be a blank white band that shows up on the footer of the web app.  Both of these new additions to the full screen appearance is yielding a somewhat less professional appearance.
    Is there some sort of tag or other setting that we can use to hide these new areas that are appearing?

    This is a better illustration.   I'm thinking that the white band at the bottom of the screen should be at the top of the screen (like the iphone does) and the web content should be shifted down that amount of space.
    the white band is hard to see with this white background however, but its obvious on the ipad in full screen mode... so go to the link on your device, save it to the home screen and relaunch...
    http://www.initlabs.com/sample/ios7mobileweb.html
    Is anyone else seeing this issue?

  • Mail attachment issues in full screen apps

    This is an interesting issue.  So far it only occurs with MS Excel.  When Mail is open as a full screen app and I open an xlsx file attached to a mail message the screen shifts back over to the desktop screen as it should, but the Excel window remians locked with the Mail full screen app.  At this time, I cannot swipe back over to Mail, it just shifts back over to the desktop screen every time I try.  The only resolution that I have found so far is to quite Mail from my dock icon and relaunch.  This then moves the Excel window to my desktop screen.
    I wonder if this is only an issue with programs that do not suppport full screen apps.
    Thoughts?
    Thanks,
    Marc

    Have you tried toggling - Command, Control, F
    If you do a 5 finger swipe up do you see Apple Mail as it's own desktop?  If so when you expand Apple Mail use the green traffic dot in the upper left side instead of the full screen double arrow on the upper right side.

  • Weird screen issues in full screen mode

    This problem here could as well be posted under the MacPro section, but I'll give it a try here first:
    I have a brand new MacPro 6-core with the HD 5870 graphics card option. I use a dual screen setup with a Cinema HD 23" (Aluminium body) hooked up using the Mini Display Port Adpater and a brand new NEC PA241W hooked up using the big DVI connector.
    The Cinema Display is secondary, while the NEC is primary.
    Everything runs fine until I go to full screen mode in Aperture (3.1). As soon as I use one of the floating windows of Aperture (like when pressing "H" or when using the Crop Tool) the image, which is displayed full screen on the NEC while having the browser on the ACD, starts to behave very awkward. When using the crop tool for example, it will get reduced to about 80% of the full screen size. When I move the mouse somewhere on the ACD it gets back to full screen. This then goes back and forth every time I move my mousepointer somewhere.
    Similarily, when I start to edit a few sliders with the Adjustments panel, the NEC image sometimes gets darker for a split second and then back up to normal brightness. Same here: when I move the mouse pointer on the ACD, it usually triggers this in any kind of way.
    As you can imagine, there is no way of working fluently and it gets on my nerves pretty fast, making full screen view unusable. In the normal window view, there is no such behavior at all.
    I have the feeling, that there seems to be something wrong with either the HD 5870, it's drivers, something in Aperture itself (no problems in any other Application so far) or any combination of all of the above together.
    Before this setup I used a iMac with the ACD attached and never had any issues.
    Any ideas?

    - it's just one card, the optional HD 5870
    - I switched the primary/secondary between the NEC and the ACD and also switched the way they connect to the GC, still the same. So it occurs on the ACD as well and it does not matter if either display is connected using the DVI or the Mini Display Port (therefore I think it's not a display issue)
    - I always update everything right away, so my systems are always running the latest of everything, OS X, Aperture...
    - I used the profile which was default for the NEC and a calibrated one for the ACD. But since it occurs on both monitors, I don't think this is an issue. It is highly unlikely that there are two broken profiles at the same time causing the exact same bug
    Meanwhile I got an answer from somebody in another Mac forum and he could reproduce this behavior on his MacPro, which is from 2008 and has the 5770 card. So it narrows down even further and seems to affect older MP's and the 5770 card as well. I'm indeed glad that somebody else experiences the same, because I was worried that my brand new MP was broken.
    Here are the exact steps how to reproduce it (you need a MP + Aperture + 2 Displays):
    1. go to full screen with "F"
    2. enable the HUD using "H"
    3. lock the HUD to the viewer using the small button in the upper right corner of the HUD
    4. activate any of the quick brushes, like dodge or burn
    5. the picture, which should be full screen on the primary display, will now reduce in size to about 70% and will be sitting on the right hand side of the screen
    Message was edited by: Taverner

  • Full screen issue when utilizing Ease of Use on screen keyboard and RDP in Win8.1

    Hello,
    I am exploring using touch technology with our point of sale application which is delivered to our clients using RDP.  The default touch keyboard in Win8 is basically useless for our application so we enabled the touch keyboard under Ease of Use (EoU)
    which does meet our requirements.   We enabled the KB in docked mode so it is always displayed and locked to the bottom of the display.  The issue is that when we start an RDP session in full screen mode, the RDP session is using the whole screen
    and slipping under the docked EoU KB.  Is there a means to have RDP recognize the reduced screen size with the EoU KB docked and only use the available screen real estate?  I understand that I can configure the RDP settings manually and approximate
    what I'm looking for but this drops the session into a window which is somethibg I'm looking to avoid.

    Hi Steve,
    Thank you for post in Windows Server Forum.
    As per my research, I can say that you need to set the RDP screen size manually. So after setting the size of Full screen RDP you can able to use. You can also try to switch the application in Remote Desktop connection by “Ctrl+Alt+Break”. Please check
    the shortcut to be used when using RDC.
    Keyboard shortcuts
    http://windows.microsoft.com/en-in/windows/keyboard-shortcuts#keyboard-shortcuts=windows-8
    Hope it helps!
    Thanks,
    Dharmesh

  • Safari Full Screen Page Displacement Issue, Scrolling Artefact.

    Hi, there
    I really want to make Safari my default browser, it seems like nearly the perfect balance between Firefox and Chrome. I have had a few issues with Safari, though. Once I upgraded to Lion, I decided to give Safari another try. It was very unstable and had weird graphical artefacts when scrolling (ie, the text would sort of copy down the page as I scrolled up.) I decided to switch back to Firefox/Aurora, but recently I chose to give Safari another shot seeing as there had been many software updates for Lion. Anyway, I found that after installing certain extensions, I had the weird scrolling artefact come back. So I've removed the offending extensions, and now that issue seems to be fixed.
    I have this other weird issue where for what ever reason, whether it's when I switch tabs or spaces (I'm unsure), the pages I've loaded in tabs will scroll up about 30 pixels (the height of the horizontal tab bar), and I can't scroll up any further. That means that it cuts off 30px of the header on YouTube and various other websites. The only way to fix/correctly re-align the pages, is to hit refresh or exit/re-enter full screen mode. I just find this annoying, it only happens in full screen mode.
    Any suggestions? Thanks in advance!

    Hi, there
    I really want to make Safari my default browser, it seems like nearly the perfect balance between Firefox and Chrome. I have had a few issues with Safari, though. Once I upgraded to Lion, I decided to give Safari another try. It was very unstable and had weird graphical artefacts when scrolling (ie, the text would sort of copy down the page as I scrolled up.) I decided to switch back to Firefox/Aurora, but recently I chose to give Safari another shot seeing as there had been many software updates for Lion. Anyway, I found that after installing certain extensions, I had the weird scrolling artefact come back. So I've removed the offending extensions, and now that issue seems to be fixed.
    I have this other weird issue where for what ever reason, whether it's when I switch tabs or spaces (I'm unsure), the pages I've loaded in tabs will scroll up about 30 pixels (the height of the horizontal tab bar), and I can't scroll up any further. That means that it cuts off 30px of the header on YouTube and various other websites. The only way to fix/correctly re-align the pages, is to hit refresh or exit/re-enter full screen mode. I just find this annoying, it only happens in full screen mode.
    Any suggestions? Thanks in advance!

  • Full screen issues prior to 11

    i always seem to find myself wondering, do developers even use their own products? i would assume they do, but i keep seeing stupid workflow issues or simple problems apple was always known for not having. i wont even begin to discuss the direction the hardware is taking (underpowered mini ipad? unreparable/non-upgradable macbook pro?) sheesh, the least you guys could do is make the software work, thats what we pay for. stop worrying about deadlines so much and "make it just work" as youve always been recognized for. ever since mountain lion and full screen apps in osx, it seems as if no one ever used itunes in full screen mode. was it meant to dump you out to the desktop whenever a fullscreen video finishes playback? i patiently waited for the bug fix; though you debut an entirely new version of itunes, and it has yet to be fixed. funny thing is, it has gotten worse. to clarify, itunes is in full screen mode and i choose say, a podcast. although itunes is in position "2" in mission control (dashboard is position "0"), to the right of my primary desktop (position "1"), and fullscreen video playback appears in position "3," upon playback completion i am returned past itunes to my primary desktop. i dont know how this wasnt picked up on and fixed prior to or upon release of version 11. doesnt make much sense to me as to why i have to swipe back to itunes from my desktop to choose the next video since i was in itunes when i chose the video in the first place. in addition, ive also noticed since the release of version 11 that when a video is playing in fullscreen (position "3") and i swipe back to fullscreen itunes (position "2") and choose another video to play without stopping playback, the itunes window replaces my primary desktop (position "1"), leaves the blank grey textured background usually seen behind full screen itunes in position "2" (swiping to it only reverts you back to position "1"), and playback starts fullscreen in its intended place (position "3"). the only ways to fix it is toggle the full screen option for itunes, end the video prior to selecting a different one (which as aforementioned dumps you back to the desktop in position "1"), or quit and restart itunes. aside from the fact that no one seems to like all the "streamlining" that you did to the UI (including me; i dont get the point), i dont understand how you put in so much work in redeveloping an application that wasnt 100% prior to. yes it looks cooler, and sure its cleaner, but is it practical? the workflow is terrible. sidebars became a standard for a reason, they work. you just made a UI that requires me to click more and figure out where you moved everything. did you improve its function? did you simplify its operation? in my opinion, and i imagine many will agree, absolutely not. stop worrying about how things look and pay attention to how things work first. you are deviating from your principal business model and becoming just like all the other development companies who care for nothing but their profits and shareholders. i understand making money is any business's primary goal, but remember what got you here; remember why you have loyal customers. if you forget, we wont be around to catch you when you fall.

    I just gave the 4oD site a try (using this link) with the latest runtime and I'm seeing the the scrubber bar, popout and full screen buttons.  I tried IE, Firefox and Chrome.  Could you try doing a clean install and try again?
    How do I do a clean install of Flash Player?
    Thanks,
    Chris

  • Aperture viewer issues after full screen view - in Browser, Split View and Viewer modes

    2012 MacBook Air, Mac OS 10.8.2, Aperture 3.4.3. Everything is up to date and, as usual, has been working just fine since the last update a few weeks ago. Full screen view never caused any issues... until today.
    I tried quitting and restarting Aperture. Using another Aperture library. Quitting everything and restarting my MBA... same behavior.
    I went into the full screen view, edited a photo and got out of the full screen view to export it.
    All of the sudden, only one line of thumbnails was showing up in my Broswer view (out of 380 pictures in that project). Looking closely at it, it seems like the Aperture now thinks that the desktop area it has to work with (the dark gray area where the thumbnails are) is larger than the aperture window because a part of photo is showing up cut off at the right edge and no slider at the bottom:
    (note: at the bottom it says 380 items displayed)
    Going back to full screen view, everything looks and works as nothing has happened:
    In Broswer view, if I scroll down such that the first row is out of the view, the second row of thumbnails shows up:
    Now, if I scroll back up, two rows of thumbnails are shown in the viewer:
    To get the third row to show up, I need to scroll down to get the top two rows out of the way and so on.
    At some point I saw this weirdo but have not been able to replicate it:
    Split View also has its issues - the photo itself is no longer centered and the slider at the bottom gets out of the way past the right edge of the Aperture window before reaching the end of the row of thumbnails:
    Finally, when double clicking the photo in the Split View to view it by itself, once again it is not centered and cut off on the right side but there is no slider...
    Any ideas? I tried looking through the Viewer-related threads on here and did not see anything close to this. Is there a way to contact Apple support? I found some form somewhere on the website, but it had a dropdown for operating system and nothing past 10.7.2 so I am guessing it is not being maintained...
    edit: added the note under the first image

    When the graphical user interface is misbehaving, it frequently helps to remove the Aperture preferences apple.com.Aperture.plist from your user library, see the Aperture 3: Troubleshooting Basics on how to do this.
    Regards
    Léonie

  • OS X LION Issues with Full-Screen; iPhoto, Image Capture & Mail

    Hello,
    I'm experiencing un-Apple-like issues (bugs) with Lion in Full-Screen mode.
    For example - iPhoto doesn't seem to like Full-Screen mode. If iPhoto is open and I connect a camera, for which I prefer Image Capture to retrieve my pics... Image Capture opens 'behind' the full-screen iPhoto, but I can't get to it. Image Capture shows as open on the menu bar in iPhoto's full-screen mode. If I go to the desktop (where it should be opening) Image Capture isn't 'on top' and clicking it takes me back to iPhoto full-screen
    Similarly, if I get mail and return to the desktop (the only way to see the dock) and I click on the 'Mail' app icon - I am catapulted into Image Capture... or iPhoto. Returning to the Desktop to click the Mail icon from the dock... takes me to Image Capture... or iPhoto. The 3rd try takes me to the Mail.app which is usually always open and in full-screen mode.
    While I'm complaining about bugs, I'd like to mention that I am fully dismayed by the loss of control in full-screen mode when using apps such as Mail or iPhoto. The Mail app opens an email to edit (such as a reply) but you can't access any other mail docs to 'cut and paste' info from. I can only click SEND or CANCEL.
    What if I don't want to CANCEL? I just want to go to another email and cut a piece to paste.. I have to exit full-screen mode which allows me to open two email documents at once, then cut and paste. Essentially Mail in Full-Screen is only a reader... not a work area. I can only access the document I have open, since it greys out the Message Viewer. You can't click on the message viewer nor access any of the features of Mail.app. You can only write your email and either Cancel or Send. Where is the 'hold on a second while I go cut and paste'? I don't want to cancel.
    Can't seem to use Safari since I'm constantly three-finger swiping it away. My cursor hovers over a text field and suddenly it's zooming in and locks text input. I have to iPhone-like swipe to expand to exit this inadvertent partial (very slight) zoom. Sometimes the zoom is so partial that I can't figure out what's going on until I just exit full-screen mode, close the window and start over.
    Seems like I'm starting over and over and over... just to do simple things. Inadvertent zooming, inadvertent 3-finger returning to Desktop, inadvertent changing apps... ugh.
    I'm willing to let go of the old and embrace the new future but so far it's been pretty uncomfortable for me to constantly monitor my overly sensitive trackpad gesturing combined with constant bugs and glitches. I'll save complaining about iPhoto's over-simplification (apparently for dummies) like the new Edit menu, Export menu, etc.. since it's more iLife than Lion related. Rate Lion: 2 out of 5 stars for ease of use & features complicated by unrefined software issues.

    I've tried follwoing these instructions but I have an issue with
    # Create snort user. The intention is to let user snort have access only to the snort database.
    $ sudo createuser -U _postgres -P snort
    Password:
    Enter password for new role:
    Enter it again:
    Shall the new role be a superuser? (y/n) n
    Shall the new role be allowed to create databases? (y/n) n
    Shall the new role be allowed to create more new roles? (y/n) n
    It keeps telling me "could not connect to database postgres: could not connect to server: No such file or directory"
    I'm running OSX Mountain Lion, and have verified using serveradmin status postgres that it is up and running.

  • Issue with Full Screen & Input languages (Mavericks 10.9.1)

    I have two issues with the latest (Version 8.0.24308) Microsoft Remote Desktop from the Mac App store:
    1. If I tick the connection entry "Start session in fullscreen" option, after connect the desktop slips upwards like on the screenshot (below on the link)
    2. The default input method switches to Latvian after connect (never used Latvian anywhere...).
    On my Mac:
    - System language: Hungarian
    - Input language: Hungarian
    On the server:
    - System language: English
    - Input language: Hungarian (default) + English
    +: the app doesn't supports Retina display resolution :(
    Screen Shot link:
    db.tt/yYKN0arM

    Hi,
    1. The version 8.0.24308 offers updated functionality for full screen mode to users of OS X 10.7+:
    OS X native: The native full screen feature for the Mac OS X version.
    Custom: The custom full screen mode enables the multi-monitor feature in order to provide a better experience for users of Mac OS X versions 10.7 and 10.8.
    Important information for users of 10.9: if you have disabled "Displays have separate Spaces" in Mavericks
    (System Preferences > Mission Control) go to Preferences > Resolution in the Microsoft Remote Desktop client and configure the setting using the same option.
    Please try the OS X native mode and see how it works.
    2. The OS keyboard locale, is suggested to the remote PC. Therefore, please check the keyboard locale.
    Hope this helps.
    Jeremy Wu
    TechNet Community Support

  • Issues after making an excel full screen

    Hi,
    I am using a piece of code to make an excel workbook full screen. Code is working correctly but the problem is when this particular workbook is opened, if I open any other excel workbook that will also opening in full screen. I don't want this. The code that
    I am using is as follows:
    Option Explicit
    Private Declare Function FindWindow Lib "user32" Alias "FindWindowA" (ByVal lpClassName As String, ByVal lpWindowName As String) As Long
    Private Declare Function SetWindowLong Lib "user32" Alias "SetWindowLongA" (ByVal hWnd As Long, ByVal nIndex As Long, ByVal dwNewLong As Long) As Long
    Private Declare Function GetWindowLong Lib "user32" Alias "GetWindowLongA" (ByVal hWnd As Long, ByVal nIndex As Long) As Long
    Private Const GWL_STYLE = (-16)
    Private Const WS_CAPTION = &HC00000
    Private Const WS_MAXIMIZEBOX = &H10000
    Private Const WS_MINIMIZEBOX = &H20000
    Private Const WS_SYSMENU = &H80000
    Private Declare Function SetWindowPos Lib "user32" (ByVal hWnd As Long, ByVal hWndInsertAfter As Long, ByVal x As Long, ByVal y As Long, ByVal cx As Long, ByVal cy As Long, ByVal wFlags As Long) As Long
    Private Enum ESetWindowPosStyles
    SWP_SHOWWINDOW = &H40
    SWP_HIDEWINDOW = &H80
    SWP_FRAMECHANGED = &H20
    SWP_NOACTIVATE = &H10
    SWP_NOCOPYBITS = &H100
    SWP_NOMOVE = &H2
    SWP_NOOWNERZORDER = &H200
    SWP_NOREDRAW = &H8
    SWP_NOREPOSITION = SWP_NOOWNERZORDER
    SWP_NOSIZE = &H1
    SWP_NOZORDER = &H4
    SWP_DRAWFRAME = SWP_FRAMECHANGED
    HWND_NOTOPMOST = -2
    End Enum
    Private Declare Function GetWindowRect Lib "user32" (ByVal hWnd As Long, lpRect As RECT) As Long
    Private Type RECT
    Left As Long
    Top As Long
    Right As Long
    Bottom As Long
    End Type
    Sub Title_Toggle()
    ShowTitleBar Application.DisplayFullScreen
    End Sub
    Sub ShowTitleBar(bShow As Boolean)
    Dim lStyle As Long
    Dim tRect As RECT
    Dim sWndTitle As String
    Dim xlhnd
    '// Find window handle
    sWndTitle = Application.Caption '// Old code used "Microsoft Excel - " & ActiveWindow.Caption
    xlhnd = FindWindow("XLMAIN", sWndTitle) '// Old code did not have class name
    '// Get the window's xlhnd, tRect
    '// Show the Title bar ?
    If Not bShow Then
    lStyle = GetWindowLong(xlhnd, GWL_STYLE)
    lStyle = lStyle And Not WS_SYSMENU
    lStyle = lStyle And Not WS_MAXIMIZEBOX
    lStyle = lStyle And Not WS_MINIMIZEBOX
    lStyle = lStyle And Not WS_CAPTION
    Else
    lStyle = GetWindowLong(xlhnd, GWL_STYLE)
    lStyle = lStyle Or WS_SYSMENU
    lStyle = lStyle Or WS_MAXIMIZEBOX
    lStyle = lStyle Or WS_MINIMIZEBOX
    lStyle = lStyle Or WS_CAPTION
    End If
    SetWindowLong xlhnd, GWL_STYLE, lStyle
    Application.DisplayFullScreen = Not bShow
    '// Ensure the style is set and makes the xlwindow the
    '// same size, regardless of the title bar.
    SetWindowPos xlhnd, 0, tRect.Left, tRect.Top, tRect.Right - tRect.Left, tRect.Bottom - tRect.Top, SWP_NOREPOSITION Or SWP_NOZORDER Or SWP_FRAMECHANGED
    End Sub
    Can anyone tell me the solution of this problem
    Thanks!

    Hi,
    This forum is to discuss application compatibility testing, common compatibility issues, and best practices for creating Windows-based applications. And your issue is off-topic here.
    I help move this case to the moderation forum and it will be moved to a correct forum by the moderator
    Best regards,
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

Maybe you are looking for