Odd issue editing/checking out sites.

Hey everyone, I just created a couple sites in Sharepoint 2013 online and half have a weird issue were there title and description show up below where expected, and smaller.  So, I tried to edit them and there's no option to check out the ones that
are weird.
I've been digging around for a while and I think there's something weird going on with the Site Pages thing.  I'm not sure what the difference is but it looks like the ones that work have a Site Pages page the ones that are  messed up don't.
I have some pictures but apparently can't upload so...
Any help would be much appreciated, I've run out of ideas and places to look for ideas!
Thanks,
Adam

Are the sites that show up differently created with a different site template?
Jason Warren
@jaspnwarren
jasonwarren.ca
habaneroconsulting.com/Insights

Similar Messages

  • Odd Issue Editing in Photoshop with color and lens corrections

    First off, I'm on LR 4.4 and PS CS6 (Camera Raw 7.4.0.137) using ProPhoto RGB as my LR colorspace and have my PS color settings as Working Space: ProPhoto RGB and my color management policies to preserve embedded profiles.
    When I right click on a DNG in LR and choose "Edit in Photoshop", LR sends it to PS and PS does its "Reading in Camera Raw Format" and opens the image.  However, the colors are off (very muted) and any lens corrections I've applied in LR are missing.  My monitor (iMac on OSX 10.8) is calibrated with a Spyder.  I've also noticed that if I choose to edit in another application, it renders the tiff fine and the color and lens corrections are correct in the tiff. 
    Anyone have any ideas what my issue is?
    Thanks,
    Matt
    ETA: After some experimenting, it seems that the "Adobe Standard" profile is what gets sent to Photoshop.  The rest (Camera Landscape, Portrait, etc.) are ignored. What's going on here?

    Sounds like you need to reset your warning dialog. Preferences>General>Prompts [Reset all warning dialogs]
    Then try it again and make certain of the three choices you are Editing a Copy with Lightroom Adjustments.

  • Unable to edit checked out file in NWDS

    A project was created in NWDS for DCs      fscm/bed/web/shared and is/uces/war.
    But while syncing source, or compiling, we received this error: 
    Apr 24, 2014 1:37:09 PM
    /userOut/Development Component
    (com.sap.ide.eclipse.component.provider.listener.DevConfListener)
    [Thread[ModalContext,5,main]] ERROR: fscm/bd: Build failed for
    sap.com/fscm/bd(sap.com_FSCM_BD_1) in variant "default": Cannot build
    because used component is broken: sap.com/fscm/bd/web/bd( sap.com_FSCM_BD_1)
    How would we go about getting sap.com/crm/tc/core to my NWDS so that we can compile?
    Thanks, in advance.

    the track is newly created?
    did it work before?
    if it is new, most case your basis configuration work is not done
    they have to import the dependent sca to the track

  • Creating refunds in CR&B and issuing the check in Accounts Payable (ERP)

    Hi experts-
    I'm on an implementation project where ERP and CR&B are being put in place, both being on the same SAP instance/ box. The current refund process calls for generating refunds on the customers' contract accounts in CR&B and issuing the checks out of AP. The check memo field is to include the customer's name, Contract Account # ,and service address.
    Is there a standard SAP process to accommodate for this requirement? If not, what custom program or interface could satisfy the requirement?
    I'd like to hear if anyone has done anything similar and what successful approach was followed.
    Thanks,
    MD
    Moderator note - thread locked, no research - duplicate of Creating a refund request in CCS and printing that refund check FI-AP
    Edited by: William Eastman on Apr 26, 2011 5:24 PM

    1. Take List of all applied Invoices of the Payment
    2. Check the status of those invoices. Each one of them should be in status 'Accounted'
    3. If not,Identify the problem with the Invoice and Clear that. The problem may be Invoice adjustment(adj to Paid invoices allowed).
    4. Try running Create Accounting again.
    5. If the problem persists still, it conveys us that the Transactions were struck in loop and can be resolved only by using UPDATE command.
    6. Contact Oracle for Data fix
    Regards,
    Sridhar

  • After userA check out a page, edit the page and save, Sharepoint prompt userA have checked out the page

    In one of site collection at our SP2013 farm, we have "SharePoint Server Publishing" site feature and "SharePoint Server Publishing Infrastructure" site collection feature activated.
    One of user (UserA) create a page in a page library. The new page is marked as "checked out by UserA". It is fine.
    Then UserA open the page -> edit page -> key in something and "save". Then the page prompt him "The file Pages/subfolder/test001.aspx has been modified by i:0#.w|test\userA on 8Aug2014 xx:xx:xx" and ask him to choose "Leave
    this page" or "say at this page".  The date time is exactly the time he was editing the page.
    Whatever he choose will save the page and return to "View" mode (non-edit mode).
    It is not the only problem. When userA want to edit the same page again and save, it prompt him that "The page could not be saved because your changes conflict with recent changes made by another user. If you continue, your changes will be lost."!
    When userA choose continue or "check out". Follow screen show up:
    What can we do? In summary, userA cannot edit a page because userA have checked out! We have tried for different users have exactly same issue.

    We are having the same problem, the one thing we have found is if we use the Save Icon on the top right hand side of the page in the ribbon (next to follow), that Save works just fine.  What is causing the issue is when trying to use the Save Icon on
    the left hand side of the ribbon that has the dropdown options to 'Save', 'Save and Keep Editing' or 'Stop Editing'.  It doesn't matter if you just click on the main Icon or choose any of the dropdown options, they all cause issues with the pages.  
    Thoughts?
    Nick Hurst

  • Check in check out in Dreamweaver CS5 with php site

    I created a new site for a client that has about 160 pages, three user login levels, site security, php, forms, . . . The client has a staff member who will make updates to pages with changing content but now wants access to the entire site so she can change wording on other pages as well - she's their new communications coordinator and it certainly makes sense to me. But I'm worry about giving her access to the entire site - I've since learned about check in and check out in Dreamweaver. Since I can't just throw pages in a directory for her to access via ftp (have set that up for one staff member creating gis maps), I'm wondering if this check in check out option is the better way to go for us.
    She will use Dreamweaver, like me. Although we do not share the same office or have access to the same network. The only sharing we can do is on our hosting services server. Can I "check out" files I need her to leave alone and leave them that way? That way she'll have access to all of the primary content pages, not the scripts, css, includes, admin, js, bin, etc files. It should make life easier for her, too, I think.
    What's common practice for this? And how does synchronization fit in?

    Digital Ink LLC wrote:
    What's common practice for this?
    This situation really needs a proper Content Management System (CMS): Wordpress, Joomla, Drupal, Expression Engine all come to mind.
    She's a content contributor, you're the system admin. She needs a bulletproof browser-based editing environment to do her thing without worrying about anything else.
    Down the track, she'll probably want repeat content that she can control on different pages, content expiry, scheduled content, categories, tags, sidebars, headlines: all standard CMS features.
    Using Dreamweaver and Check In/Check Out is just going to create one issue after another.
    The current solution was probably adequate in the past but it's reaching the limits of its scalability. It's really time for a new solution.
    Have you considered a CMS?

  • How to enable multiple check-out and check-in for offline editing (sharepoint 2010)

    I have  a SharePoint site where I am using check-in check out feature for one of 'Project' document library.
    By default SharePoint supports single document to be checkout for offline editing (when i click on checkout, SP ask for 'Use local draft option' for offline editing), if I select that check box, it take a local copy for offline editing in my 'SharePoint
    Draft' folder.
    but when I try to check-out multiple files from 'Project' document library, it does not show any form for confirmation, as shown above (use 'Local draft option') and files get checked out on server it self, but I didn't find any local copy in  'SharePoint
    Draft' folder. mean sharepoint does not support multiple file check-out feature for offline editing.
    Please suggest if we can check out multiple files for offline editing in sharepoint 2010.
    Thanks

    Sagar, Thanks for reply, but none of the link is useful.
    These all links talk about the check-in check-out feature, but my issue is that, when I do select multiple files for checkout Draft’s dialog
    box does not appear and offline copy of files is does not created. how to fix that issue.

  • Editing XMP metadata in Bridge for checked-out files?

    Our custom connector does not implement the WRITE_XMP_METADATA Capability because we do not want to change the XMP of a file in our DAM system without checking in a new file version.
    However, when a file is checked out through Adobe Drive, we would expect to be able to edit its XMP metadata in Bridge just like we can for local files.
    It looks like this is still not possible with Adobe Drive 3, i.e. if your connector does not implement the WRITE_XMP_METADATA Capability you cannot edit XMP for checked out files either.
    It seems weird that you can edit XMP metadata for checked out files with regular CS applications but not with Bridge. Is this something that is expected to be fixed in a future version?
    Thanks

    In our design, editing XMP data in Bridge and in regular CS applications is different, the former one will be routed to SetXMPHandler in you connector, in the latter case, CS applications take the normal file writting ways to embed XMP data in the file content.
    The purpose of this design is to offer similar user experience for normal users when they edit XMP data for AD assets and local file assets, they don't need to check-out files first.
    To address your issue, I think you can add some codes in SetXMPHandler to auto check-out files before real XMP operation, and check-in them before exiting the handler
    We will consider to make some enhancements for this part, that's, to allow editng XMP data for the checked-out files in Br, in the next release, thanks for this advice.

  • Check out native doc from Site Studio Contributor

    Why can't I (or my users) check out a native document from a dynamic list in contribution mode? Is there any way to accomplish this (besides installing software on every client's computer)? I modified the default dynamic list fragment to use the pdf (web-viewable) link to the document in lieu of the regular Site Studio URL (so that Site Studio doesn't try to apply the document to dynamic converter), as I want to simply display the PDF when the user clicks on it.
    All of that works great, and I can still check in documents just fine. However, "Edit Target" doesn't work in contribution mode, and even if I view the info on the document, and check it out from there, it doesn't even give me the link to download the original document. Is there a way around this?
    Thanks

    I guess, image needs to be in the Content Server. You can try desktop integration suite or webdav so that user can easily checkin the digital assets to the content server.

  • No warning show up when edit a page checked out by other

    We are using SharePoint 2013 standard on-premise. Users are testing with IE9.
    When a page is checked out by userA, userB click on the page -> edit page. UserB see no change on the page. No warning at all.
    After userA or someone with permission discard the checkout, userB can edit page now.
    I have tried using default oslo template and still the same. Is it a bug for IE9 or I missed something is configuration?

    Prithvi, thanks for your reply.
    Because clicking "edit page" do not turn into site editing mode, I cannot test adding web part.
    But when I click "Show Ribbon" and then "Edit page", I get "This page has been checked out by another user." modal box prompt. Is it also default behaviour? Should it mention "This page has been checked out by test\userA"?

  • Force Check Out For Infopath Form while editing in browser.

    Hi,
    Can Someone tell me How to Force Check Out for InfoPath form while editing in browser. 
    Any Help Would be more than Welcome.

    Rohan,
    Sorry but you have posted to a forum that deals exclusively with questions/issues about customizing and programming Microsoft Project, a planning and scheduling application. I suggest you delete this post and find a forum for InfoPath or the browser you
    are using.
    John

  • Having an odd issue. Frequently, when I go to Safari, I see a popup that goes away in a few seconds. Looks almost like an app download, but disappears in a hurry and then goes to site I was last visiting. I'm stumped how to fix (popups disabled, etc)

    Having an odd issue. Frequently, when I go to Safari, I see a (what appears to be) popup that goes away in a few seconds. Looks almost like an app download, but disappears in a hurry and then goes to site I was last visiting. I'm stumped how to fix (popups disabled, etc.)... Goes away so quick I'm not even sure what it's about...

    Thanks for the update! Next, and this is like a last step for me, but I would quit Safari one more time, then clear all the Safari data from the phone with this info and then test it out again:
    Safari web settings on your iPhone, iPad, or iPod touch
    Clear information from your device
    To clear your history and cookies from Safari in iOS 8, tap Settings > Safari > Clear History and Website Data. In iOS 7 or earlier, tap Clear History and tap Clear Cookies and Data.
    To clear other stored information from Safari, tap Settings > Safari > Advanced > Website Data > Remove All Website Data.

  • Visual Source Safe VI checked out but cannot edit

    I am using LabView 7.1 and Visual Source Safe (VSS). Previously, I have created several VI's and used VSS to manage them without a problem. I received a VI (and sub VIs) from another company location -- I copied them into my local directory -- and copied them from there into VSS.
    I then check out the files (using VSS or using LabView|Tools|SourceCodeControl ... I have tried both) but I am not allowed to edit the VI -- all I get is the "operate" cursor. VSS shows the VI as "checked out". My local directory shows that the VI file does not have the "R" attribute (read only) set. So I should be able to edit the VI, but I cannot. ????
    If I try to use LabView|Tools|SourceCodeControl to check the file out again ... I get an error, stating that I already have the file checked out, and I cannot check it out again. LabView seems to "know" that I have the file checked out, so what might be preventing me from editing it? [I tried different settings in the tool palette, but regardless of what is set, I only see the "operate" cursor when I try to work on the VI.]
    I am relatively new to LabView, and have only been using it with VSS for a couple of months now . . . . so it could easily be something simple that I am overlooking...

    Hi Rich,
    I'm happy that your issue was solved.
    Now, for the suggestion about placing the "Change to Edit/Run Mode" in the "Edit" menu - that DOES sound like an intuitive choice. However, I can also see the logic in having the menu item under the "Operate" menu - for choosing how to operate your front panel and block diagram.
    I would recommend you (and anyone else with good ideas) to submit your Product Suggestions through the 'feedback' link on www.ni.com/contact. Our R&D team will then look into the possibilities of implementing the feature in future versions of LabVIEW.
    We appreciate your ideas, thanks.
    - Philip Courtois, Thinkbot Solutions

  • Document check out & check in issue

    Hi , 
     Need help in resolving following issue.
      I have a document in document library and i do have all permissions on the document library. I am facing an issue with following sequence of steps.
                     1. Click on check out document
    2.  its automatically prompted with a dialog box to use "My local draft folder".
    3. I have selected that check box and able to see the downloaded file in 'SharePoint Drafts" folder.
    4. After clicking on ok button on above dialog box or popup, the system will automatically opens the down loaded file.
    5. I have closed the opened file and again i have done "Check in" operation on same document (which was checked out previously) .After check in , I am getting following error and it is not allowing me do check
    in.
    As per our requirement user should not get above message and he/she should be able to do check in with out any issues.
    Could some one please help me out in this issue.
    FYI, We have implemented using OOTB feature and there is no custom code behind.
    Thanks 

    Hi KRISHNA,
    Please try to move out the particular file from the SharePoint Drafts folder, then check in the file again.
    And make sure you are not using a system admin account or other account that does not match the local user account.
    In addition, there are some similar posts, please check if they are useful for you:
    https://jeanpaulva.wordpress.com/2012/04/27/error-this-document-was-checked-out-to-your-local-drafts-folder-but-the-local-copy-could-not-be-checked-in-or-check-out-could-not-be-discarded-close-any-application-that-is-editing-the-document-and/
    https://chayadigital.wordpress.com/2014/03/12/sharepoint-drafts-folder-not-showing-checked-out-files-for-office-excel-or-word-documents/
    http://sharepointknowledgebase.blogspot.com/2012/08/this-document-was-checked-out-to-your.html#.VSSCOHkfqM9
    Thanks,
    Wendy
    TechNet Community Support
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
    [email protected]

  • I cannot get into iCloud, it sites connection error. I am online otherwise. My username and password check out. Anyone else with a similar problem?

    I Cannot getinto iCloud, it sites connection error. I am online otherwise. My username and password check out. Anyone else with this problem?

    SUCCESS! I was trying to get in with Internet Explorer, and getting the error message.
    I switched over to FireFox, and connected immediately!

Maybe you are looking for