Odd issue with transitions...Help!

OK, I have an odd issue with the transitions going on within Imovie.
In this case I have the "Photo album" theme.
About every three slides the "camera" pulls back from one picture (pic 1) and goes in to the other photo (pic 2).
2/3 of the way into the video the (pic 2) photo is late, so you actually see the switch in the middle of the transition. Pic one is in its place until about half way through.
Any ideas? Thanks!

Just found this related thread http://discussions.apple.com/thread.jspa?threadID=1903498&start=0&tstart=0
In there, they suggest a work around using Precision Editor on the transition. I will try this tonight.

Similar Messages

Odd issue with WHERE clause

Greetings All,
I'm having an odd issue with a WHERE clause that I've been working on in a Record Set, $upperdate displays as 2011-02-28, $lowerdate as 2011-02-01, but,
WHERE visitdate >= $lowerdate AND visitdate <= $upperdate
returns no values, and
WHERE visitdate >= $lowerdate AND visitdate <= '2011-02-28'
returns the appropriate values,
Here is the code for $upperdate and $lowerdate:
$datemonth = date ('m');
$dateday = '01';
$dateday1 = date ('t');
$dateyear = date ('Y');
$lowerdate = date("Y-m-d",mktime(0,0,0,$datemonth, $dateday, $dateyear));
$upperdate = date("Y-m-d",mktime(0,0,0,$datemonth, $dateday1, $dateyear));
I've also tried the following things to check functionality with no success:
$upperdate = '2011-02-28';
$dateday1 = '28';
BETWEEN...AND... behaves the same as... >= AND <=
Thanks for the help in advance!

Finally worked it out,
I ended up putting single parentheses around '$lowerdate' and '$upperdate' and it works now.
It still seems strange, because it worked when I used no parentheses with the variable in:
WHERE visitdate >= $lowerdate AND visitdate <= '2011-02-28'
Also, I had tried the parentheses a few other times without success, so maybe there was something else awry that I fixed inadvertantly while messing around.
Tim

Issue With Search Help in Module Pool

Dear All,
I have an Issue with Search help. I have created a Module Pool Program. In this module pool, User requires the search helps for the fields.
Imagine there are 3 fields on a screen. Field1, field2 and field3.
Field2 entries depends on field1 and field3 entries depends on field1 and field2.
I have created a collective search help. and created the corresponding Ztables to maintain the search help entries.
Now I assigned the same collective search help to both the fields . i.e. field2 and field3. But when i execute the module pool program, and press F4 on these fields , the data shown is write. BUT for the 3rd field, when I select F4, The second field values are transfered to the screen, instead of third field value.
Any Idea will be appreciated .
Help me , Its very Urgent.
Regards,

Did you check the screen field names & search help name? is it identical & unique?
Raja T

Issue with F4 help!!!!!! need to resolve it asap.

Hello Guru's,
I am modifying the Web Dynpro for ABAP application for employee search in HR Administrator.
I am able to change the infoset and make use of the one I created using the enhancement framework.
I included couple of standard fields Provided by SAP into the selection fields of the infoset.
And now I have issue with F4 help associated with the fields.
The problem is when you do a F4 on the selection fields the selection option which comes is having couple of columns with the key field highlighted in blue and when selecting a record or row the value selected is EN instead I would like to have the Org unit number to be selected.
to be more clear:
in the popup of f4 assume the columns are
Langu Org. unit Org. Unit text.
as of now Langu is the key field(highlighted in blue) and when selecting a row the value selected is Langu key instead I want to have Org. Unit to be selected.
Please help me out in resolving this.
Thanks in advacne for your time.
Regards,
Pramod

Hi Pramod,
I don't know how it is done in infoset. But if you have a context node and attribute for the field which is displayed in the view, create a custom dictionary search help for the field you want. Design the search help as per your requirements (what fields to be displayed etc..).
In the context attribute of that field property, select 'Dictionary search help' in the Input help mode. Enter the name of your custom search help here.
Thanks & Regards,
Satheesh.

Issues with Transition Automation Packs

Hi,
We are facing an issue with transition automation packs. We have an extended property which is (became) part of "Transition Automation Pack for 'Cisco Systems, Inc." And we do not see any option to remove the same. We can see that certain other automation packs have the option to remove (remove button). Any idea, on what could be the issue? or Any comments?
Thanks,
Vijay

It's my understanding that you cannot remove an automation pack if there are dependencies on it. Perhaps your content has references to the extended target properties in this automation pack.

Issues with Search Helps

Hi Experts,
Anyone have any advice or suggestions for this problem?
Problem:
When running standard SAP search helps (let's say search for material by material type - from MM03) the system seems to truncate my last character. For example if I enter ERSA for material type - and look at the dynamic selection criteria all I see is 'ERS'. Thus when I run my search - no results are returned.
It is very odd behavior.
Notes:
- This occurs with standard and custom search helps
- This only occurs with search helps - other fields do not have this issue
- I recently downgraded my GUI version from 710 back to 640. Since then I have uninstalled and re-installed many times - this does not seem to help.

Why don't you try to login thru some other desktop that have SAPGui 7.10 and check whether its working or not.
a®

Issues with browser helper in OATS

I'm using OATS and am running into issues with not being able to start the browser helper when I attempt to record a session.
I've tried to restart the browser utility, have re-installed the software and still have the problem.
I had encountered this problem before on another box and the Windows admin gave me domain admin privileges and then I no longer had issues with the browser helper.
Has anyone run into this before? Can anyone tell me whether or not there is any information available going over any required permissions for this tool?
Thanks in advance for your consideration.
Beth

I just want to provide a better description of our issue here.
We work in a secure environment and our client workstations are locked down in order to satisfy the organizational requirements of our customer.
In this environment, we had the problem with starting the browser helper while using the openscript utility. Having local admin on our workstation did not address the problem. We played around with some of the individual permissions to no avail and finally, the admin applied the domain admin privilege to allow us to move forward with our testing.
Can anyone shed any light on what individual privileges would be necessary to run this tool?
Thanks very much,
Beth

Issues with Flash Help output

Hello there, hoping to get some advice on a couple issues
with RoboHelp.
We just started deploying FlashHelp here, and have run into a
couple of snags. I am running RoboHelp version 6, Flash player
version 9, and have the Flash authoring software (if needed), but
that’s version MX 2004. We’re running IE 6 and Windows
XP Pro.
Question 1
In a FlashHelp (generated) project, when on the Index tab, if
I use the search box to search for an index word, the following
error displays: "A script in this movie is causing Adobe Flash
Player 9 to run slowly. If it continues to run, your computer may
become unresponsive. Do you wish to abort the script?" If I tell it
NOT to abort the script, the computer still runs slowly. If I tell
it to go ahead and abort the script, Internet Explorer freezes up.
I asked our in-house web team and Flash development team to
look at the index issue, and they discovered something strange. The
index only breaks if the index word entered starts with the letter
A. Has that ever happened to anyone else? We’ve tried
multiple help projects on multiple boxes (computers), and results
have been very inconsistent. Sometimes it breaks, sometimes not,
but ONLY when the index entry starts with an A.
Is there something that I can change in the code anywhere to
prevent that from happening in the first place? Alternately, is
there a way to change the skin to completely remove that input
field from the index? It's not necessary to our process to have it
there, so long as the index entries are there with the scroll bar.
Note: We’re just using the Flash Default skin –
no modifications.
Question 2
One of my latest help projects is context-sensitive. When
called from within the application (F1) the proper topic displays.
However, the TOC always shows the default book - it does not expand
to match to where the user really is within the help.
Even stranger (to me), the TOC works just fine for the
first-level and second-level books and pages. However, anything
third level or deeper, the TOC behaves as described above -
defaulting to the welcome page book.
All the books are books with links (to topics), if that
matters. Also, I tried generating the project as WebHelp, and had
the same results - the TOC still would not automatically populate
when called as CSH from within the application.
In all other respects, things seem to be functioning just
fine.
I downloaded the trial version of RoboHelp 7, and had the
same issues.
Thanks so much!

I can recreate the problem but I haven't seen it reported
before. WebHelp has an option that would let you avoid the input
box in the Index but not FlashHelp.
There is information in Snippet 1 on my site about TOC
synchronisation but I don't know if it will help with FlashHelp.
Please report this bug via the Adobe site.
http://www.adobe.com/cfusion/mmform/index.cfm?name=wishform

Odd issue with SoundBlaster 24-bit: Scratchy voices(only)

I bought a SoundBlaster 24-bit a while back, and oddly, I'm only really having one issue with the sound in most games: The voice. Anytime someone talks it's unbelievably scratchy, and overly loud. Does this in Halo, Sacred, Serious Sam 2, etc. Everything else is fine, all other sound effects and music come through clearly(and at the appropriate volume). Has anyone else experienced anything like this, and if so, did you find a way to fix it's
I've updated the drivers, so all that it good. With it being just one piece of audio(across all these games) I'm just not sure what approach to attempt first. Any suggestions would be much appreciated.
Thanks,
DM

You might try a latency of 28. There are folks on the forum with much more experience with this issue than I have, so if you want additional advice, I recommend that you post a new thread on that question.
DigitalMan wrote:
Ok, I finally found something that looks low-end enough for me to understand(Double Dawg) and it's saying that the latency for the sound card is already at 64. Now, as I understand it I am go mess with this no. going by increments of 32? Do I need to go up, or down? I'd try it, but frankly I'm scared that it'll mess my system up, so I thought I'd ask first.
DM
Message Edited by Katman on 0-25-2006 08:03 PM

FF 20.0.1 Giving Me Massive Issues With Tabs - Help Greatly Needed

So Firefox updated tonight unfortunately, even though I thought I had turned that off, and I'm having massive issues. It took about two hours for me to just get my shortcut keys working again and if I right click to "Open in a New Tab" there is no responsive activity from FF. If I right click on anything (on that MASSIVE menu, btw - really? I don't need all of that!) none of it is working. And any tabs I now manage to get open using my restored shortcut keys go unresponsive.
I've tried re-starting w/o add-ons, but nothing changed. And I'm not restoring to a default of 20.0.1 - at that point I'll scrap this update and go back to my preferred v.19 as of January.

Issues with a massive right-click context menu has been reported as caused by Firebug, so make sure to update Firebug to the latest version.
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

Odd issue with collapsing outlines in VS Express 2013

I've only just noticed that when I use crtl+m,o to collapse all the outlines, structure definitions don't get collapsed. Is this expected, a design bug or just something odd with my projects or setup? See the screenshots below.
Before:
After:
Peter

Hi Peter,
I think I could repro this issue in VS2013.
But it works well if I use the "Ctrl+M, Ctrl+S" or "Ctrl+M, Ctrl+M" for the specific structure. Or use "Ctrl+M, Ctrl+ A" for all.
Reference:
https://msdn.microsoft.com/en-us/library/da5kh0wa.aspx
Those are the workaround for this issue, but for this issue, maybeyou
can submit this feedback to Microsoft Connect feedback portal: http://connect.microsoft.com/VisualStudio/feedback/CreateFeedback.aspx,Microsoft
engineers will evaluate them seriously. Thanks for your understanding.
Best Regards,
Jack
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Issue with F4 help for the variables for the 0CALWEEK and 0CALMONTH

We have custom IOs which refers to 0CALWEEK and 0CALMONTH.In the report we have variables on the custom IOs.For these variables F4 help does not giving any values .I tested with 0CALWEEK also. For the 0CALWEEK also F4 help does not working..Please help me on this issue.The variable I haveused d to test with 0CALWEEK is 0S_CWEEK.
Edited by: Sudhakar Are on Jul 6, 2010 4:17 PM

Hi Pramod,
I don't know how it is done in infoset. But if you have a context node and attribute for the field which is displayed in the view, create a custom dictionary search help for the field you want. Design the search help as per your requirements (what fields to be displayed etc..).
In the context attribute of that field property, select 'Dictionary search help' in the Input help mode. Enter the name of your custom search help here.
Thanks & Regards,
Satheesh.

Strange Issue With Search Help

Hi Experts,
I am stuck with a search help issue, when using a certain Help for an input field on my screen i am getting a "Value help dialog canceled" cancelled error , the same search help seems to be working fine
when run from sap r/3.
I am pretty sure the design part (Attribute binding and mentioning the search help in the context ) is correct and how it should be.
Could Someone Please throw some lite on this issue.
Thanks In Advance,
Chaitanya.

Hi Chaitanya,
When reusing DDIC search helps in WDA, it may not always work as desired. Calls to classic screens in search help exits for example is one of the scenarios that works pretty well with SAPGUI but doesnt work with WDA.
The following links may be of help!
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/47/9f724642314aabe10000000a42189b/frameset.htm
Thanks,
Chitrali

Odd issue with slow motion and exporting

Hello,
I have a project with footage taken at either 24p or 60i settings on a Canon HF200. I'm using 7.0.1, ProRes 422 selected. Frame size is set to 1920x1080. I'm exporting using the "Share" menu and the Apple TV preset.
The project is divided into sequences. One of these sequences (whose source material shot using the 60i setting) is set to play in slow motion using the "change speed" option set to 50%.
Here's the odd part, to me at least:
When I export just the slow motion sequence of the project, it plays perfectly (good quality, smooth not jerky, no shadows/trails). But when I export all sequences joined together, the slow motion sequence (and just the slow motion sequence) appears stuttery, with trails on every action by the actors.
Another odd bit: when I export just a subset of the project including the slow motion sequence and everything after it, again the slow motion sequence plays as intended, after export. So the problem only occurs if I export the slow motion sequence with anything before it included.
Thanks in advance for any help.

Problem solved, but I'm not sure if it was my re-importing the clips, or un-checking the "frame blending" option that did it. I did both for no particular reason, and one of them worked.

Odd issue with message tracking. (User's emails show as SUBMIT and not SEND. No Byte Size) Exchange 2010

Hi everybody.
I had been tasked with tracking down a user's emails.
I ran a script in powershell to export data I could work with.
For some reason this particular user's emails in this time range do not show up as the EVENTID "SEND".
They also do not have a Byte Count nor a list of recipients.
They only seem to show up as "SUBMIT"
Apparently this user has been sending out emails with a large amount of BCCs.
Is there any way to actually see this activity? Why would it be showing up as SUBMIT and not SEND? Why won't it show any recipients or byte count?
Here is my example script.
Get-MessageTrackingLog -ResultSize Unlimited -Server "contoso-ex1" -Start "5/1/2014 12:01:00 AM" -End "5/8/2014 6:40:00 PM" | Select Sender,{$_.Recipients},{$_.RecipientStatus},MessageSubject,TimeStamp, EventId, Source,SourceContext,MessageId,InternalMessageId,ClientIP,ClientHostName,ServerIP,ServerHostName,ConnectorId,TotalBytes,RecipientCount,RelatedRecipientAddress,Reference,ReturnPath,MessageInfo
| Export-Csv .\MessageTrackingLog.csv
Please note that only this one user's emails are showing only as SUBMIT. The rest are mostly SEND.
MCSE 2003, Exchange. MCTS Vista, 7. Administrator of awful, neglected website http://timssims.net

Hi,
I’d like to double confirm the question: This issue occurred only on one specific user in a particular time range.
In other time, the message tracking shows correctly information for this user.
I suggest we check the application log during that time range and see whether there are any related event IDs about this user.
Thanks,
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Simon Wu
TechNet Community Support

Odd issue with transitions...Help!

Similar Messages

Maybe you are looking for