Odd motion blur when iPhone 6 is cold.

Hey so I have noticed this happening since I got my new iPhone 6. I live in buffalo and below 5 degree days arnt uncommon. I also dont have an auto car starter. I noticed That when my iPhone is in my cold car with me It seems to have what I can only call a noticeable motion blur. I never noticed this with my 5 and my brother said he didn't notice it with his 6. As my phone gets warmer this goes away. My brother got me nervous tho saying that I should take to Apple. I logically just assumed the crystals in the screen were cold and this was a non issue I shouldn't worry about. Any advice?
Thanks in advance.

Oh ok thanks. So would I already know if permanent damage was done? Also would you saying using it in the cold is the problem and not just the phone being cold? For example if I just don't use it at all but it stays powered on while I am in cold weather or before my car warms up would that be safe?

Similar Messages

Why no Motion Blur when animating a camera?

I think I'm in trouble. I'm finishing a project where a logo (let's call it a box) was built by creating all the sides using solids, then making these solid layers 3D. I then move the CAMERA around the box. That seemed to be a lot easier than trying to move all the 3D layers in front of a camera.
I cannot get any motion blur effect when the camera moves fast. I've tried numerous settings (and of course have the layers enabled for motion blur). Is it not working because the layers aren't in motion? Can I acheive motion blur by animating a camera around 3D layers?

Thanks, but I do have motion blur on for the composition and the layers and the render queue. There is no "switch" to turn motion blur on for a camera layer, and of course no 3D switch for a camera because it's inherently 3D.
I used various motion blur (advanced) composition settings, as well as adjusting the camera's apature, fstop, focal length, focal distance, etc. Can't seem to get any motion blur effect. The camera occasionally whip-pans, slows down, speeds up - so it's certainly moving fast enough.
Just wondering if I should have created a Null layer, parent it to the camera and animate the Null because that does have switches for 3D and motion blur.
Why wouldn't motion blur show when animating a camera around an object?

Odd motion blur in Log and Capture

not on the video camera's LCD, but on the Log and Capture window
i'm suddenly having this motion blur, just when subject even slightly moves...
there is like blur of small lines, but agian, Not on the original footage playing off camera.
my camera is panasonic 100a.

log and capture gives a low res proxy and is not an accurate reflection of captured content.
Hook up an external monitor (even if it's a cheapo portable tv) to see what you're gonna get whilst editing.

Fast motion blur/ghosting

i have seen various posts on problems with slow motion where it creates a ghosting/lag/blurry eye hurting product. I have seen responses to this problem via changing the motion blur attributes in the video tab.
I am seeing a similar effect when i speed things up too. Is it the same answer?
how can i get rid of that seizure inducing lag/ghosty problem when i speed up video in FCP?
please help, deadline imminent!

Turn off MOTION BLUR when you make the speed adjust.
Or use the Nattress 50% filter. www.nattress.com
Shane

My text moves to the wrong place when I apply motion blur!

Hello friends! thanks in advance for any able to solve my problem. when ever I apply motion blur to moving text it repositions the text permanently.... I have to delete the motion blur effect in order to have it text stay on course...any suggestions?

"Delete the motion blur effect"? Sounds like you are applying an effect, rather than turning on motion blur.
Please provide a detailed explanation of the process that causes the problem. If possible, post a screengrab as well.
Note that Motion Blur, at its core, does alter the position of animation by blurring the disnace between two moments in time. When you activate motion blur, it samples the position of your text at multiple points in time to create the illusion of motion blur. If your text is moving very fast, the results can be surprisingly major.

IPhone 3GS Camera Crashes iOS 4.3 When Device Used In Cold Weather

I was in Chicago today where the weather was in the low 40's (high 20s with the windchill). As I was sightseeing and using my iPhone to shoot casual snapshots, the OS completely crashed when I was trying to take the picture. My iPhone has never crashed for any reason, but I shrugged it off and then restarted the device. I took two more pictures, and then the phone again crashed on the third picture. After another restart, the phone started crashing every time I took a picture without exception.
Fearing the worst that my phone was about to die on me while on a business trip, I headed back to the car and headed for the hotel. As I was driving back, I got to thinking that my phone has never been in weather this cold before (I'm from California). As soon as I got to my room, I put the camera beneath the heating vent and allowed it to warm up. Once it felt like it was room temperature, I picked it up and started shooting pictures to see if I could get it to crash again. After forty pictures, it was still working.
Are there any known issues with the camera sensor on the iPhone 3GS in cold weather? Another poster from Eastern Europe seems to be having the same problem with the same model phone:
http://discussions.apple.com/message.jspa?messageID=11128452
--Craig

Hi,
This article may help.
iPhone, iPad, and iPod touch (4th generation): Keeping device within acceptable operating temperatures
Carolyn

IPhone 4S screen looks motion blurred?

So about two or so weeks ago, my iPhone (4S) started to look almost like a light motion blur effect was used on the screen. I haven't gotten it wet or anything like that, so I'm not sure why it started doing this. I've tried to find a fix for this, but I haven't found any posts/other online resources where the problem is the type of blurring that I seem to be having. I've got a few photos of what it looks like:
(blurred on the "enter passcode" text and the white squares)
(for reference, that last walking dead photo, this is what it actually looks like: http://distilleryimage2.ak.instagram.com/aa7274a2347111e39c3022000a1fb14d_8.jpg - as you can see, quite a difference from how the image is displayed on my phone).
It's obviously a fairly minor thing and seems to only happen with white colored text and areas, but it's starting to get a bit annoying. I was hoping someone here might have some suggestions for me on how to fix this? I've already toggled with the brightness and restarted the phone (both regularly and with a hard reset), but neither helped. Any advice would be much appreciated.

No.
You would have to send your iphone to someone you know in Canada, then that person would have to get the iphone to Apple.
Apple will not accept a shipment from outside the country.

Motion Blur help.

Alrighty, I'm using Photoshop CS4 Extended, and I'm having troubles with motion blur.
When I set the angle to anything above 60 really and distance to about 300 it crashes saying Adobe Photoshop CS4 has encountered a problem and needs to close.
This happens every time. So I tried restarting Photoshop, then restarting my computer, then I uninstalled and reinstalled fresh and it still crashes when I begin to use motion blur, infact I believe it even crashed just by opening the motion blur window for over 40 seconds.
Any help or ideas?
Thanks in advance!

Thanks a lot Mylenium! I'll do that in a few minutes, by the way heres an update with some more information.
Photoshop crashes when I change the angle to 49 or higher, anything lower is fine.
I went to my event viewer and I found this:
Faulting application photoshop.exe, version 11.0.0.0, faulting module mmxcore.8bx, version 11.0.0.0, fault address 0x0000d62a.

Motion Blur doesn't work in Final Cut Pro

I've been working on stuff and int he past Motion Blur worked and now when I use it the motion blur has refused to work as a preview or after I render it. Is there something i'm doing wrong that's making it happen?
I'm using Mac OS X Leopard, the latest final cut pro and i'm using blue and green screen and Chroma Keyer and image control sinc ei'm making a sillouette and it's worked for me before.
If someone can reply and suggest anything that would be awseome.

Does your object to be blurred actually move...if not then use a blur filter
When you check the motion blur box and click the disclosure triangle what is the Blur percentage? did you try increasing it? If so does it make a difference?

Imported video has "motion-blur" artifacts, but original is fine.

Hi,
I've just purchased a Samsung SMX-F30 standard-def camcorder. I've shot a few clips and decided to test its compatibility with iMovie. iMovie recognised the camcorder with no problems and imported all my clips without any hassle. However, when I play the clips in iMovie if the clip has any motion, say an arm or hand being waved or head moving, then the image blurs in a way I can only describe as "interlace staggering". That is, alternate lines in the fram shift position left and right alternately. This is really annoying as you can imagine!
A few details about my setup other than the machine details below:
Clips recorded in 4:3
iMovie defaults when importing
iMovie version is 8.0.2 (I think)
iMovie imports to an external firewire 500GB hard drive
Clips not analysed for stabilisation after import
Camera records in "H.264/AVC Format" according to the manual
Recording at approx 5Mbps
Camera was using built-in electronic anti-shake
I hope someone can suggest a few things to try as I've just returned to movie making after owning a Mini-DV based camcorder 10 years ago!
Thanks
Stuart

His book gives specific directions and more info on AVCHD with frame rates and bits...so definately buy the book. Your question: It kinda depends on your set up. Many people need to import into imovie 9 just so they can get an editable copy of the footage. So then you make your way over to the events folder and import the events into another program for turning it into progressive and de-interlacing it. You have to becareful because you will have duplicate footage.
He goes into details on how to do this. I have a different workflow because i import on a different machine using imovie6 since i am working with tapes. Then i convert it before i import it again into imovie. My DV footage doesn't get motion blur though so i am only doing this workflow to ensure no quality loss.

Motion blur is messing up my composition

Hey all,
I'm working on a project which involves 3d space (using camera tracker). Everything is going fine until I needed to turn on motion blur for a layer. When i switched it on for the composition, things start to get weird. If you play the video, the null objects visibly "rotate" instantly, move from spot to spot randomly, and it's obvious that something is not right. When i turn off the motion blur, the object right themselves.
Does anyone have any suggestions? I think i can work through it by creating a new composition then dropping the existing into that and turning on motion blur there, but i would rather be able to work with it in the same comp.
I'm working with 1920x1080p footage 30 fps in CS5.5 on a macbook pro 2.52ghz intel core 2 duo. If you need any other info just let me know.
Thanks
Dan

OK, here's my best guess. When you turn on motion blur time samples differently. The keyframes that are causing the problems are at a z rotation for the camera of 179º. This made me think you were experiencing a gimbal lock with your camera moves. When the camera gimbal locks the camera orientation flips. It has nothing to do with motion blur being enabled on the layers.
I seldom apply tracking data directly to a camera for this reason. I almost always apply the tracking data to a null then parent the camera to the null. This will prevent gimbal lock problems with the camera.
There is a solution that may work for you. Open up the composition settings, the Advanced tab and change the Shutter phase to 0º. This should prevent the gimbal lock that you're getting. I wouldn't call this a bug, but a better workflow would have prevented the problem in the first place.

Stop iTunes 11.0 from launching automatically when iPhone is connected?

Hi all -
Just got an iPhone 5 and connected it to my computer to charge. Discovered upon doing so that my version of iTunes is now upgraded to 11.0. How do I stop iTunes 11.0 from automatically launching when I connect my iPhone? I can't find an appropriate box to uncheck. In the old version of iTunes, there were different things to uncheck for stopping automatic syncing and automatic launching. Is this still the case? If so I'd like to prevent launching but keep syncing.
Thanks.

Hummm, that's odd. I always have "Automatically sync when iPhone is connected" unchecked, it has been working fine untill this morning, out of the blue when I plug the iPhone 5 in, **** iTunes launchs itself Then an error message said the iTune could not connect to the iPhone5, meanwhile the iPhone keeps beeping because of that.
It seems like Apple loves all these obnoxious automatic this and that features, they do it in iPhoto, XCode.... everything they make. Personally I like to have more control of what I want to do, I really HATE HATE HATE HATE HATE HATE HATE!! all the automatic these and that.

Motion blur options?

Hello!
I'm working on a new project. Footage is being recorded from a game at 300 fps (then resampled to 30). I'd like to achieve the same motion blur as for footage take with a normal camera. I tried a few things but I'd like to see if there are some other options:
Plain frame blending from framerate resampling from 300 to 30.
Reel Smart Motion Blur plug-in without frame blend switch on. Looks pretty decent at first sight and renders reasonably fast. But under closer inspection it shows a lot of incorrect interpolation at a lot of elements.
Reel Smart Motion Blur plug-in with frame blending switch on. Similar to the previous example.
CC Force Motion Blur plug-in with interpolation switch on. Produces a great result at a cost of really long render times. Also i have no idea where to set the shutter phase (native shutter and interpolating dont work together?).
Are there any other options?
Thanks a bunch.

Hey guys,
its been a while and Im playing around with motion blur of high fps footage again.
I've tried the effect CC Wide Time which blends a designated number of frames before and after the current frame.
I have footage recorded at 1000 fps. In comparison frame mix would blend 40 frames into a single frame (1000 fps to 25 fps) which would represent a shutter angle of 180° (i believe). That doesn't look smooth enough in my mind, so in CC Wide Time i set the values to 80 frames total (39 ahead, 40 behind, 1 current just to be accurate ), which represents the shutter angle of 360° with a phase of -180°.
Now the problem is that i would like to time remap the clip. After a precomp i time stretch the clip to obtain the real life time scale - 1000 fps to 25 fps, with the motion blur i describe above. If i enable time remap and start playing with slowmotion the intensity of motion blur intesity (blurred frames) stays the same, which isnt right. A way to fix that would be to use a linear 40 -> 0 frames blended corresponding to the velocity achieved by timeremaping, but i cant seem to find a way to use clip velocity in expressions.
I could use timewarp and use speed value instead of time remap, but that seems like a pain especially when i think of applying ease to the keyframes.
To think all of this could be avoided if CC Force Motion Blur would offer shutter phase.
Any thoughts on the issue?
Thanks!

MOTION BLUR & LIP SYNC PROBLEM

This problem is with encoding in CS5.
Using Encore to make a DVD I had to Transcode all my assets because of the "end of file" error
on doing this I had 7 clips out of 18 with either motion blur (may be jitter) and audio out of sync with the video but not on all of them.
Then I re encoded my originals in Prem Pro using different settings but still the same problem.
Your help would be appreciated
johnacs5

Hi Jim & sellador,
As I am from England all my work is PAL 25 fps
This particular clip has the worst blur or jitter quite painful to watch. Oddly enough plays fine on the time line or viewer but not in WMP or DVD on computer or television (this must tell us something)
I have now done over 20 different outputs the best being de interlace no blur but the quality suffered.
Right some info:
Material, Original clip as shown in adobe properties: mpeg - 25fps Aspect 4:3 1.094 pixel
720 x 576 - Upper field first - average bit rate 871kb/s - Audio 48k
Sequence settings: DV PAL upper field first - 25fps - 1.094 pixel - Audio 48k
Export settings: MPEG2 - Custom - 720 x 576 - pixel 1.094 - upper field first
Profile Main - level Main. - Max render Quality - 6.5 - 8.5 mb/s
Gop 3 & 12
johnacs5

Motion Blur

I have created a dvd (to be played on a TV) as I was viewing it a few of the clips had motion blur. What cause this? How do I fix this problem? Does it stem all the way back to how I imported it into Final cut express or exported it?

When you say "motion blur" is this what you mean? http://support.apple.com/kb/TA22228
You should also look at iDVD 7.0: Burned DVD has interlacing, pixelation, or image quality issues http://support.apple.com/kb/HT4078

Odd motion blur when iPhone 6 is cold.

Similar Messages

Maybe you are looking for